MIB Viewer

COM21-HCXTX-MIB

38 objects
This is the Com21 ComController TX Unit Control MIB module. COM21 Part# 005-0025-00
Imported Objects
COM21-HCX-MIBcom21 com21Hcx com21Traps
COM21-HCXALM-MIBhcxAlmSeverity hcxEventLogTime
SNMPv2-SMIGauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks
SNMPv2-TCDisplayString MacAddress
OIDNameAccessStatusDescription
1.3.6.1.4.1.1141.2.20Identitycom21HcxTxThis is the Com21 ComController TX Unit Control MIB module. COM21 Part# 005-0025-00
1.3.6.1.4.1.1141.2.21Nodecom21HcxDnstrmPortGroup
1.3.6.1.4.1.1141.2.21.1ScalarhcxDownstreamPortIdread-onlycurrentcontains downstream port id. Initially at least, only 1 supported.
1.3.6.1.4.1.1141.2.21.2ScalarhcxXmitFrequencyread-writecurrentContains the transmit frequency of the RF port in KHz. If this value is changed AFTER the acquisition of ComPorts then a corresponding change to the stuXmitFre…
1.3.6.1.4.1.1141.2.21.3ScalarhcxXmitGainread-writecurrentTransmit gain is used to specify the power level in the ComController transmitter. Default is 0.
1.3.6.1.4.1.1141.2.22Nodecom21HcxDnstrmStatsGroup
1.3.6.1.4.1.1141.2.22.1ScalarhcxStatsCurrMinTxCellsread-onlycurrentRepresents the number of cells transmitted in the current 15 minute period.
1.3.6.1.4.1.1141.2.22.2ScalarhcxStatsCurrMinTxNullCellsread-onlycurrentRepresents the number of null cells transmitted in the current 15 minute period.
1.3.6.1.4.1.1141.2.22.3ScalarhcxStatsPrevMinTxCellsread-onlycurrentRepresents the number of cells transmitted in the previous 15 minute period.
1.3.6.1.4.1.1141.2.22.4ScalarhcxStatsPrevMinTxNullCellsread-onlycurrentRepresents the number of null cells transmitted in the previous 15 minute period.
1.3.6.1.4.1.1141.2.22.5ScalarhcxDownstreamUtilread-onlycurrentRepresents the percentage of utilization on the downstream channel - the RF TX will stuff with null cells to match line rate. i.e. traffic cells/(traffic cells…
1.3.6.1.4.1.1141.2.22.6ScalarhcxStatsClearTxCurrStatsread-writecurrentThis attribute is used to clear current TX statistics counters in this group. This operation is only possible if the hcxStatsControl attribute is set to wrapCu…
1.3.6.1.4.1.1141.2.23Nodecom21HcxDnstrmUnitGroup
1.3.6.1.4.1.1141.2.23.1ScalarhcxDownstreamShelfIdread-onlycurrentcontains the associated shelf id.
1.3.6.1.4.1.1141.2.23.2ScalarhcxDownstreamSlotIdread-onlycurrentcontains downstream slot id.
1.3.6.1.4.1.1141.2.23.3ScalarhcxDownstreamHardwareVersionread-onlycurrentcontains the hardware version of the TX card. An empty string if card not present.
1.3.6.1.4.1.1141.2.23.4ScalarhcxDownstreamBootVersionread-onlycurrentcontains the version of the TX card boot ROM. An empty string if card not present.
1.3.6.1.4.1.1141.2.23.5ScalarhcxDnstreamUnitPrimServStateread-onlycurrentcontains primary service state of the Downstream Unit.
1.3.6.1.4.1.1141.2.23.6ScalarhcxDnstreamUnitSecServStateread-onlycurrentcontains a string defining the secondary service states of the Downstream Unit. The substrings supported by the Downstream Unit shall be: TEST - in test, as se…
1.3.6.1.4.1.1141.2.23.7ScalarhcxDnUnitConfigStateread-writecurrentThe Downstream Unit State is an active-value. Note that because we have only one port per card then this state change is exactly the same as hcxDnstrmPortState…
1.3.6.1.4.1.1141.2.23.8ScalarhcxDnUnitRestartActionread-writecurrentThe TX Unit Action is an active-value. The setting of this attibute to restart(2) causes the TX card to reset and download a new image.
1.3.6.1.4.1.1141.2.23.9ScalarhcxDnDiagTestActionread-writecurrentThis attribute is used to invoke the internal TX diagnostic test. In order to activate this test, the card must be placed in the test state.
1.3.6.1.4.1.1141.2.23.10ScalarhcxDnDiagTestResultread-onlycurrentThis attribute contains the result of the last TX diagnostic test. Details TBD.
1.3.6.1.4.1.1141.2.23.11ScalarhcxDnTestStatusLedread-onlycurrentThe TX Test Status LED is a read-only attribute which describes the condition of the TX Test Status light emitting diode located on the RX board. A value of on…
1.3.6.1.4.1.1141.2.23.12ScalarhcxDnFaultStatusLedread-onlycurrentThe RX Fault Status LED is a read-only attribute which describes the condition of the TX Fault Status light emitting diode located on the TX board. A value of …
1.3.6.1.4.1.1141.2.23.13ScalarhcxDownstreamSerialNumberread-onlycurrentcontains the serial number of the TX card. An empty string if card not present.
1.3.6.1.4.1.1141.4.60NotificationhcxDnstrmUnitPrimStateChangecurrentGenerated whenever a the hcxDnstreamUnitPrimServState changes in value. This an event with no clear condition. Only severity is WARNING.
1.3.6.1.4.1.1141.4.61NotificationhcxDnstrmUnitSecStateChangecurrentGenerated whenever a the hcxDnstreamUnitSecServState changes in value. This an event with no clear condition. Only severity is WARNING.
1.3.6.1.4.1.1141.4.62NotificationhcxDnDiagTestCompletecurrentThis notification is generated whenever the TX internal diagnostic tests are completed. This an event with no clear condition. Only severity is WARNING.
1.3.6.1.4.1.1141.4.63NotificationhcxDnTestStatusLedChangecurrentgenerated whenever there is a change in test LED status. This an event with no clear condition. Only severity is WARNING.
1.3.6.1.4.1.1141.4.64NotificationhcxDnFaultStatusLedChangecurrentgenerated whenever there is a change in the Fault LED status. This an event with no clear condition. Only severity is WARNING.
1.3.6.1.4.1.1141.4.65NotificationhcxDnOperationFailurecurrentThis notification is generated by the CC whenever a TX card fails to respond correctly to a request. This failure could indicate either a resource problem or s…
1.3.6.1.4.1.1141.4.68NotificationhcxSynthLockLossDetectedcurrentDefault severity is MINOR.
1.3.6.1.4.1.1141.4.69NotificationhcxSynthLockLossClearcurrentSeverity is CLEARED.
1.3.6.1.4.1.1141.4.70NotificationhcxLossOfFrameClkDetectedcurrentDefault severity is MINOR.
1.3.6.1.4.1.1141.4.71NotificationhcxLossOfFrameClkClearcurrentSeverity is CLEARED.
Type Definitions
NameSyntaxStatusDescription
GainINTEGER (0..255)
PrimServiceStateINTEGER { is(1), oos(2) }