COMMON-GOLF-MIB
54 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.326 | Nodefore | |||
| 1.3.6.1.4.1.326.2 | Nodesystems | |||
| 1.3.6.1.4.1.326.2.20 | Nodeethernet | |||
| 1.3.6.1.4.1.326.2.20.1 | Nodeedge | |||
| 1.3.6.1.4.1.326.2.20.1.1 | Nodeedgecommon | |||
| 1.3.6.1.4.1.326.2.20.1.2 | Nodegolf | |||
| 1.3.6.1.4.1.326.2.20.1.2.1 | Nodegolfproducts | |||
| 1.3.6.1.4.1.326.2.20.1.2.2 | Nodegolfcommon | |||
| 1.3.6.1.4.1.326.2.20.1.2.2.2 | Nodefore-mgmt | |||
| 1.3.6.1.4.1.326.2.20.1.2.2.2.1 | NodeagentMgmt | |||
| 1.3.6.1.4.1.326.2.20.1.2.2.2.1.1 | NodeagentBasicInfo | |||
| 1.3.6.1.4.1.326.2.20.1.2.2.2.1.1.1 | ScalaragentRuntimeSwVersion | read-only | mandatory | This is a textual description for the runtime software version and revision. If the version number is one and revision number is zero agentRuntimeSwVersion wou… |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.1.1.2 | ScalaragentPromFwVersion | read-only | mandatory | This is a textual description of the agent PROM firmware version and revision. If the version number is one and revision number is zero agentPromFwVersion woul… |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.1.1.3 | ScalaragentHwRevision | read-only | mandatory | This is a integer number for the hardware revision. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.1.1.4 | ScalaragentMgmtProtocolCapability | read-only | mandatory | The network management protocol(s) supported by this agent. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.1.1.5 | TableagentMibCapabilityTable | not-accessible | mandatory | A list of MIB capability entries supported by this agent. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.1.1.5.1 | RowagentMibCapabilityEntry | not-accessible | mandatory | A MIB capability entry contains objects describing a particular MIB supported by this agent. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.1.1.5.1.1 | ColumnagentMibCapabilityIndex | read-only | mandatory | A list of agentMibCapabilityDescr entries. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.1.1.5.1.2 | ColumnagentMibCapabilityDescr | read-only | mandatory | The name of the MIB supported by the agent. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.1.1.5.1.3 | ColumnagentMibCapabilityVersion | read-only | mandatory | The version of the MIB specified in this entry. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.1.1.5.1.4 | ColumnagentMibCapabilityType | read-only | mandatory | The type of the MIB specified in this entry. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.1.1.6 | ScalaragentStatusConsoleInUse | read-only | mandatory | This indicates whether console is currently in-use. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.1.1.7 | ScalaragentStatusSaveCfg | read-only | mandatory | This indicates the status of the device configuration. other(1) - this entry is currently in use but the conditions under which it will remain so are different… |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.1.2 | NodeagentBasicConfig | |||
| 1.3.6.1.4.1.326.2.20.1.2.2.2.1.2.1 | ScalaragentUpdateSource | read-write | mandatory | The source of the runtime software or configuration file to be downloaded by the system. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.1.2.2 | ScalaragentCfgUpdateCtrl | read-write | mandatory | This object provides the user to download configuration file. The setting will take effect when the system is restart. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.1.2.3 | ScalaragentCfgUpdateFile | read-write | mandatory | The name of the configuration file to be downloaded from the TFTP server when agentCfgUpdateCtrl is set to enabled. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.1.2.4 | ScalaragentSoftwareUpdateCtrl | read-write | mandatory | This object provides the user to download runtime software. The setting will take effect when the system is restart. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.1.2.5 | ScalaragentSoftwareUdateFile | read-write | mandatory | The name of the runtime software to be downloaded from the TFTP server when agentSoftwareUpdateCtrl is set to enabled. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.1.2.6 | ScalaragentSystemReset | read-write | mandatory | This object indicates the agent system reset state. Setting this object to no-reset(4) has no effect. Setting this object to cold-start(2) or warm-start(3) wil… |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.1.2.7 | ScalaragentRs232PortConfig | read-write | mandatory | This object indicates the RS-232C mode while device restart. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.1.2.8 | ScalaragentOutOfBandBaudRateConfig | read-write | mandatory | This object allows user to specify out_of_band baud rate. It will take effect when the system is restart. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.1.2.9 | ScalaragentSaveCfg | write-only | mandatory | As the object is set, the current device configuration will be saved into to NV-RAM. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.1.3 | NodeagentIpProtoConfig | |||
| 1.3.6.1.4.1.326.2.20.1.2.2.2.1.3.1 | ScalaragentIpNumOfIf | read-only | mandatory | The total number of IP interfaces supported by this agent. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.1.3.2 | TableagentIpIfTable | not-accessible | mandatory | A list of IP interface entries supported by the agent. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.1.3.2.1 | RowagentIpIfEntry | not-accessible | mandatory | An agentIPIfEntry contains information about a particular IP interface. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.1.3.2.1.1 | ColumnagentIpIfIndex | read-only | mandatory | This object uniquely identifies the IP interface number in the agentIpIfTable. This value should never greater than agentIpNumOfIf |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.1.3.2.1.2 | ColumnagentIpIfAddress | read-write | mandatory | The IP address of the interface. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.1.3.2.1.3 | ColumnagentIpIfNetMask | read-write | mandatory | The IP net mask for this interface. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.1.3.2.1.4 | ColumnagentIpIfDefaultRouter | read-write | mandatory | The default gateway for this IP interface. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.1.3.2.1.5 | ColumnagentIpIfMacAddr | read-only | mandatory | The MAC address of this IP interface. For interfaces which do not have such an address. (e.g., a serial line), this object should contain an octet string of ze… |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.1.3.2.1.6 | ColumnagentIpIfType | read-only | mandatory | The physical layer interface of the IP interface. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.1.3.3 | ScalaragentIpBootServerAddr | read-write | mandatory | The IP Address of the Boot Server. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.1.3.4 | ScalaragentIpGetIpFromBootpServer | read-write | mandatory | This object indicates whether the agent should get its system IP address from Bootp server at start up. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.1.3.5 | ScalaragentIpUnauthAddr | read-only | mandatory | The IP address of an unauthorized SNMP packet. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.1.3.6 | ScalaragentIpUnauthComm | read-only | mandatory | The community string of an unauthorized SNMP packet. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.1.3.7 | ScalaragentIpLastBootServerAddr | read-only | mandatory | The last IP address used by the agent as Boot server IP address. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.1.3.8 | ScalaragentIpLastIpAddr | read-only | mandatory | The last IP address used by the agent as system IP address. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.1.3.9 | TableagentIpTrapManagerTable | not-accessible | mandatory | A list of trap managers to which SNMP traps will be sent. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.1.3.9.1 | RowagentIpTrapManagerEntry | not-accessible | mandatory | Each entry contains the particular trap manager settings. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.1.3.9.1.1 | ColumnagentIpTrapManagerIpAddr | read-only | mandatory | The IP address where SNMP traps will be destined for |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.1.3.9.1.2 | ColumnagentIpTrapManagerComm | read-write | mandatory | The community string used to encode SNMP trap packet to be sent to the trap manager. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.1.3.9.1.3 | ColumnagentIpTrapManagerStatus | read-write | mandatory | This object indicates whether or not the trap should be sent to this trap manager. |