COMPUTERM-COMMON-MIB
138 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2439 | Nodecomputerm | |||
| 1.3.6.1.4.1.2439.1 | NodectChannelExtensionMIB | |||
| 1.3.6.1.4.1.2439.1.1 | NodectSystem | |||
| 1.3.6.1.4.1.2439.1.1.1 | NodeRFC1213-MIB | Signifies that an abort has occured. Short and Long descriptions provide further information. All the Computerm aborts will be notified to the user using this … | ||
| 1.3.6.1.4.1.2439.1.1.1 | ScalarctSysName | read-write | mandatory | System Name. |
| 1.3.6.1.4.1.2439.1.1.2 | NodectAlert | Signifies a Computerm alert e.g. ErrorRate or Utilization values have exceeded the threshold values. Short and Long descriptions provide further information. T… | ||
| 1.3.6.1.4.1.2439.1.1.2 | ScalarctSysType | read-only | mandatory | System Type ie. VMC8250, Other etc., |
| 1.3.6.1.4.1.2439.1.1.3 | NodectInformationalAbort | Signifies that an informational abort has occured. Short and Long descriptions provide further information. All the Computerm aborts will be divided into those… | ||
| 1.3.6.1.4.1.2439.1.1.3 | ScalarctSysPrimaryBackupMode | read-only | mandatory | Primary/Backup Mode of the Channel Extender. This is defined in PARAMTAB.DAT |
| 1.3.6.1.4.1.2439.1.1.4 | NodectCxNormalMode | Used for normal mode traps. This trap will be defined in the NMS with a Normal Severity level. | ||
| 1.3.6.1.4.1.2439.1.1.4 | ScalarctSysAutoStartFlag | read-write | mandatory | State of the auto start flag. Set to 1, enable or online to turn channel extender ONLINE or to 0 disable or offline to turn channel extender OFFLINE Note! Turn… |
| 1.3.6.1.4.1.2439.1.1.5 | NodectCxDiagnosticsMode | Channel Extender is in diagnostics mode. This trap will be used to distinguish between the ONLINE and OFFLINE unit. This trap will be defined in the NMS with a… | ||
| 1.3.6.1.4.1.2439.1.1.5 | ScalarctSysPowerSupplyMonitorFlag | read-only | mandatory | Whether EXEC is monitoring the power supply or not |
| 1.3.6.1.4.1.2439.1.1.6 | NodectCxNormalChannelExtenderMode | Channel Extender is in Channel Extension mode and operating in normal mode. This trap will be defined in the NMS with a Normal Severity level. | ||
| 1.3.6.1.4.1.2439.1.1.6 | ScalarctSysChannelExtenderMode | read-only | mandatory | State of the EXEC i.e. whether it is in diagnostics mode or channel extender mode |
| 1.3.6.1.4.1.2439.1.1.7 | ScalarctSysElapsedTime | read-only | mandatory | For how long the system has been running expressed in days, hours, minutes. |
| 1.3.6.1.4.1.2439.1.1.8 | ScalarctSysStartupTime | read-only | mandatory | The last time EXEC was restarted expressed in Month, Day, Year, Hour, Minute format in the local time zone. |
| 1.3.6.1.4.1.2439.1.1.9 | ScalarctSysCurrentTime | read-only | mandatory | Current Time expressed in Month,Day,Year,Hour,Minute format in the local time zone. |
| 1.3.6.1.4.1.2439.1.1.10 | ScalarctSysCustomerName | read-only | mandatory | Textual Identification of the name of the customer |
| 1.3.6.1.4.1.2439.1.1.11 | ScalarctSysCustomerServiceNumber | read-only | mandatory | A six(6) digit identification code |
| 1.3.6.1.4.1.2439.1.1.12 | ScalarctSysComputermContact | read-only | mandatory | The textual identification of the contact person at Computerm, together with information on how to contact this person. |
| 1.3.6.1.4.1.2439.1.1.13 | ScalarctSysGMXCommand | read-write | mandatory | Issue select GMX command via SNMP. Supported Commands: SWC, <channel_number_and_address>, <network_address>, <num_contiguous> channel_number_and_address-Hexade… |
| 1.3.6.1.4.1.2439.1.2 | NodectInventory | |||
| 1.3.6.1.4.1.2439.1.2.1 | TablectHwTable | not-accessible | mandatory | Channel Extender Hardware Inventory Table |
| 1.3.6.1.4.1.2439.1.2.1.1 | RowctHwEntry | not-accessible | mandatory | Information about each hardware module installed |
| 1.3.6.1.4.1.2439.1.2.1.1.1 | ColumnctHwSlotIndex | read-only | mandatory | Slot Index of the hardware board. For system level modules, a specific slot number will be reserved. See the top of this document for details. |
| 1.3.6.1.4.1.2439.1.2.1.1.2 | ColumnctHwBoardIndex | read-only | mandatory | The board index for a specific slot e.g. ARTIC card and AIB daughter cards. This can also be used to include the extenally connected modules e.g. OC3/DS3 conve… |
| 1.3.6.1.4.1.2439.1.2.1.1.3 | ColumnctHwPortIndex | read-only | mandatory | Port Number of the board. This can be potentially used for MUX cards and Peripheral devices. |
| 1.3.6.1.4.1.2439.1.2.1.1.4 | ColumnctHwDeviceIndex | read-only | mandatory | Externally connected devices index. This can be potentially used for peripheral devices and OC3/DS3 converters |
| 1.3.6.1.4.1.2439.1.2.1.1.5 | ColumnctHwName | read-write | mandatory | Name of the hardware module |
| 1.3.6.1.4.1.2439.1.2.1.1.6 | ColumnctHwType | read-only | mandatory | Type of the hardware module |
| 1.3.6.1.4.1.2439.1.2.1.1.7 | ColumnctHwSpeed | read-only | mandatory | Speed of the hardware module. This is the baud rate for comm. modules |
| 1.3.6.1.4.1.2439.1.2.1.1.8 | ColumnctHwChannelOrLineNumber | read-only | mandatory | Channel Number of the Adapter/Emulator boards and Line Number of the Comm boards. For other board types, this value will be zero. |
| 1.3.6.1.4.1.2439.1.2.1.1.9 | ColumnctHwPromNumber | read-only | mandatory | PROM Number of the module |
| 1.3.6.1.4.1.2439.1.2.1.1.10 | ColumnctHwMNumber | read-only | mandatory | M-Number of the module |
| 1.3.6.1.4.1.2439.1.2.1.1.11 | ColumnctHwSerialNumber | read-only | mandatory | Serial Number of the module |
| 1.3.6.1.4.1.2439.1.2.1.1.12 | ColumnctHwRevisionLevel | read-only | mandatory | Revision level of the hardware module |
| 1.3.6.1.4.1.2439.1.2.1.1.13 | ColumnctHwStatus | read-only | mandatory | Status of the hardware module |
| 1.3.6.1.4.1.2439.1.2.2 | TablectSwTable | not-accessible | mandatory | Channel Extender Software Inventory Table |
| 1.3.6.1.4.1.2439.1.2.2.1 | RowctSwEntry | not-accessible | mandatory | Information about each software module running. |
| 1.3.6.1.4.1.2439.1.2.2.1.1 | ColumnctSwSlotIndex | read-only | mandatory | Slot Index of the hardware module where this software module is running. For system level modules, a specific slot number will be reserved. See the top of this… |
| 1.3.6.1.4.1.2439.1.2.2.1.2 | ColumnctSwBoardIndex | read-only | mandatory | The board index for a specific slot e.g. ARTIC card and AIB daughter cards where this software module is running. This can also be used to include the extenall… |
| 1.3.6.1.4.1.2439.1.2.2.1.3 | ColumnctSwPortIndex | read-only | mandatory | Port Number of the board this software module is running. This can be potentially used for MUX cards |
| 1.3.6.1.4.1.2439.1.2.2.1.4 | ColumnctSwDeviceIndex | read-only | mandatory | Externally connected devices index. This can be potentially used for peripheral devices and OC3/DS3 converters |
| 1.3.6.1.4.1.2439.1.2.2.1.5 | ColumnctSwName | read-only | mandatory | Name of this software module |
| 1.3.6.1.4.1.2439.1.2.2.1.6 | ColumnctSwPartNumber | read-only | mandatory | Software Driver Part Number |
| 1.3.6.1.4.1.2439.1.3 | NodectTopology | |||
| 1.3.6.1.4.1.2439.1.3.1 | TablectTopologyTable | not-accessible | mandatory | Provides the connectivity information between the current channel extender and all the remote units including their twin units. |
| 1.3.6.1.4.1.2439.1.3.1.1 | RowctTopologyEntry | not-accessible | mandatory | Defines each remote connection |
| 1.3.6.1.4.1.2439.1.3.1.1.1 | ColumnctTopoSlotIndex | read-only | mandatory | Slot Index of the hardware module this connection is describing. To describe the current unit's twin unit, a specific slot number will be reserved. See the top… |
| 1.3.6.1.4.1.2439.1.3.1.1.2 | ColumnctTopoBoardIndex | read-only | mandatory | The board index of the slot this connection is describing. |
| 1.3.6.1.4.1.2439.1.3.1.1.3 | ColumnctTopoPortIndex | read-only | mandatory | The port index of the slot this connection is describing. |
| 1.3.6.1.4.1.2439.1.3.1.1.4 | ColumnctTopoDeviceIndex | read-only | mandatory | Externally connected devices index. This can be potentially used for peripheral devices and OC3/DS3 converters |
| 1.3.6.1.4.1.2439.1.3.1.1.5 | ColumnctTopoName | read-write | mandatory | Textual description of this connection. Same as ctHwName. |
| 1.3.6.1.4.1.2439.1.3.1.1.6 | ColumnctTopoRemoteUnit | read-write | mandatory | Address of the remote channel extender unit. |
| 1.3.6.1.4.1.2439.1.3.1.1.7 | ColumnctTopoRemoteTwinUnit | read-write | mandatory | Address of the remote twin channel extender. |
| 1.3.6.1.4.1.2439.1.4 | NodectPerformance | |||
| 1.3.6.1.4.1.2439.1.4.1 | ScalarctPerfResetAllCompressionRatios | read-write | mandatory | This variable is used to reset the compression ratios for all different device types |
| 1.3.6.1.4.1.2439.1.4.2 | ScalarctPerfResetAllPeakThroughputs | read-write | mandatory | Use this object to reset the peak throughput values (Tx, Rx and Total) associated with this conceptual row. This will start a new data collection and new peak … |
| 1.3.6.1.4.1.2439.1.4.3 | ScalarctPerfResetAllReceiveErrorCounts | read-write | mandatory | Use this object to reset the receive error values associated with all the comm. lines. This will start a new data collection. Modifying this object will also r… |
| 1.3.6.1.4.1.2439.1.4.4 | ScalarctPerfShowFractions | read-write | mandatory | Use this object to display the CPU/Line Utilization and CompressionRatio in 1/100th of a percentage. Example: CompressionRatio: 1.59 Please note that 1.59 cann… |
| 1.3.6.1.4.1.2439.1.4.5 | TablectPerfControlTable | not-accessible | mandatory | Provides the user modifiable values for performance data |
| 1.3.6.1.4.1.2439.1.4.5.1 | RowctPerfControlEntry | not-accessible | mandatory | Provides the objects to configure performance data collection |
| 1.3.6.1.4.1.2439.1.4.5.1.1 | ColumnctPerfControlSlotIndex | read-only | mandatory | Slot index |
| 1.3.6.1.4.1.2439.1.4.5.1.2 | ColumnctPerfControlBoardIndex | read-only | mandatory | Board Index |
| 1.3.6.1.4.1.2439.1.4.5.1.3 | ColumnctPerfControlPortIndex | read-only | mandatory | Port Index |
| 1.3.6.1.4.1.2439.1.4.5.1.4 | ColumnctPerfControlDeviceIndex | read-only | mandatory | Externally connected devices index. This can be potentially used for peripheral devices and OC3/DS3 converters |
| 1.3.6.1.4.1.2439.1.4.5.1.5 | ColumnctPerfControlName | read-write | mandatory | Same as the ctHwName |
| 1.3.6.1.4.1.2439.1.4.5.1.6 | ColumnctPerfControlInterval | read-write | mandatory | Data collection interval specified in seconds |
| 1.3.6.1.4.1.2439.1.4.5.1.7 | ColumnctPerfControlUtilThreshold | read-write | mandatory | Utilization threshold value |
| 1.3.6.1.4.1.2439.1.4.6 | TablectPerformanceTable | not-accessible | mandatory | Performance data for the channel extender units |
| 1.3.6.1.4.1.2439.1.4.6.1 | RowctPerformanceEntry | not-accessible | mandatory | Provides the performance data for different hardware modules of a Channel Extender |
| 1.3.6.1.4.1.2439.1.4.6.1.1 | ColumnctPerfSlotIndex | read-only | mandatory | Slot index of the collection |
| 1.3.6.1.4.1.2439.1.4.6.1.2 | ColumnctPerfBoardIndex | read-only | mandatory | Board index for a specific slot |
| 1.3.6.1.4.1.2439.1.4.6.1.3 | ColumnctPerfPortIndex | read-only | mandatory | Port index of a board |
| 1.3.6.1.4.1.2439.1.4.6.1.4 | ColumnctPerfDeviceIndex | read-only | mandatory | Externally connected devices index. This can be potentially used for peripheral devices and OC3/DS3 converters |
| 1.3.6.1.4.1.2439.1.4.6.1.5 | ColumnctPerfName | read-write | mandatory | Same as the ctHwName |
| 1.3.6.1.4.1.2439.1.4.6.1.6 | ColumnctPerfChannelOrLineNumber | read-only | mandatory | Same as the ctHwChannelOrLineNumber |
| 1.3.6.1.4.1.2439.1.4.6.1.7 | ColumnctPerfType | read-only | mandatory | Same as the ctHwType |
| 1.3.6.1.4.1.2439.1.4.6.1.8 | ColumnctPerfStatus | read-only | mandatory | Same as the ctHwStatus |
| 1.3.6.1.4.1.2439.1.4.6.1.9 | ColumnctPerfTxThroughput | read-only | mandatory | Transmit thorughput specified in bits/second (including any overhead bits). This value is defined for communication adapters only and calculated for each pyhsi… |
| 1.3.6.1.4.1.2439.1.4.6.1.10 | ColumnctPerfRxThroughput | read-only | mandatory | Receive thorughput specified in bits/second (including any overhead bits). This value is defined for communication adapters only and calculated for each pyhsic… |
| 1.3.6.1.4.1.2439.1.4.6.1.11 | ColumnctPerfTotalThroughput | read-only | mandatory | Total thorughput specified in uncompressed bytes/second. This value is defined for adapters, emulators, compression boards, and for each device assigned to a p… |
| 1.3.6.1.4.1.2439.1.4.6.1.12 | ColumnctPerfPeakTxThroughput | read-only | mandatory | Peak Transmit thorughput specified in bits/second (including any overhead bits). This value is defined for communication adapters only and calculated for each … |
| 1.3.6.1.4.1.2439.1.4.6.1.13 | ColumnctPerfPeakTxThroughputTime | read-only | mandatory | Time stamp when the peak transmit throuput value was noted. Time is specified in the local time zone |
| 1.3.6.1.4.1.2439.1.4.6.1.14 | ColumnctPerfPeakRxThroughput | read-only | mandatory | Peak receive thorughput specified in bits/second (including any overhead bits). This value is defined for communication adapters only and calculated for each p… |
| 1.3.6.1.4.1.2439.1.4.6.1.15 | ColumnctPerfPeakRxThroughputTime | read-only | mandatory | Time stamp when the peak receive throuput value was noted. Time is specified in the local time zone |
| 1.3.6.1.4.1.2439.1.4.6.1.16 | ColumnctPerfPeakTotalThroughput | read-only | mandatory | Peak total thorughput specified in uncompressed bytes/second. This value is defined for adapters, emulators, compression board and for all the devices assigned… |
| 1.3.6.1.4.1.2439.1.4.6.1.17 | ColumnctPerfPeakTotalThroughputTime | read-only | mandatory | Time stamp when the peak total throughput value was noted. Time is specified in the local time zone. |
| 1.3.6.1.4.1.2439.1.4.6.1.18 | ColumnctPerfPeakThroughputStartTime | read-only | mandatory | Time stamp when the data sampling was started for determining peak values. Time is specified in the local time zone. Whenever user resets the peak values by se… |
| 1.3.6.1.4.1.2439.1.4.6.1.19 | ColumnctPerfResetPeakThroughput | read-write | mandatory | Use this object to reset the peak throughput values (Tx, Rx and Total) associated with this conceptual row. This will start a new data collection and new peak … |
| 1.3.6.1.4.1.2439.1.4.6.1.20 | ColumnctPerfTxUtilization | read-only | mandatory | This value is defined only for the communication adapters and computed for each physical line. This value is expressed as the transmit bits/second as a percent… |
| 1.3.6.1.4.1.2439.1.4.6.1.21 | ColumnctPerfRxUtilization | read-only | mandatory | This value is defined only for the communication adapters and computed for each physical line. This value is expressed as the receive bits/second as a percenta… |
| 1.3.6.1.4.1.2439.1.4.6.1.22 | ColumnctPerfCPUUtilization | read-only | mandatory | This value is defined only for adapters, emulators, compression board and mother board. This value represents the extent the CPU on the specified board is busy… |
| 1.3.6.1.4.1.2439.1.4.6.1.23 | ColumnctPerfDataRate | read-only | mandatory | The data rate associated with the communication line and is expressed in bits/second. For SDLC lines, although both Tx and Rx data rates are available, only Tx… |
| 1.3.6.1.4.1.2439.1.4.6.1.24 | ColumnctPerfReceiveErrorCount | read-only | mandatory | This value is defined only for communication adapters and shown as the number of errors received over the sampling interval(default =60 secs). Ideally this val… |
| 1.3.6.1.4.1.2439.1.4.6.1.25 | ColumnctPerfReceiveErrorCountStartTime | read-only | mandatory | This is the system time when the last reset Receive Errors command was received |
| 1.3.6.1.4.1.2439.1.4.6.1.26 | ColumnctPerfResetReceiveErrorCount | read-write | mandatory | This variable is used to reset the Receive Erors associated with this conceptual row. Resetting will start a new data collection. This will also set the ctPerf… |
| 1.3.6.1.4.1.2439.1.4.6.1.27 | ColumnctPerfCommLineDelay | read-only | mandatory | Communication line delay expressed in milli seconds. Valid only for Comm. adapters |
| 1.3.6.1.4.1.2439.1.4.6.1.28 | ColumnctPerfCompressionRatio | read-only | mandatory | Compression ratio is defined for the compression board, for each channel adapter, and emulator and for each device assigned to the adapter and emulator. This i… |
| 1.3.6.1.4.1.2439.1.4.6.1.29 | ColumnctPerfCompressionRatioStartTime | read-only | mandatory | This is the system time when the last reset compression ration command was received |
| 1.3.6.1.4.1.2439.1.4.6.1.30 | ColumnctPerfResetCompressionRatio | read-write | mandatory | This variable is used to reset the compression ratio associated with this conceptual row |
| 1.3.6.1.4.1.2439.1.4.6.1.31 | ColumnctPerfDeviceTxUncompressedCounts | read-only | mandatory | This is the transmit uncompressed byte count for a device Note: When ctPerfShowFractions is OFF this value is expressed in kilobytes |
| 1.3.6.1.4.1.2439.1.4.6.1.32 | ColumnctPerfDeviceTxCompressedCounts | read-only | mandatory | This is the transmit compressed byte count for a device Note: When ctPerfShowFractions is OFF this value is expressed in kilobytes |
| 1.3.6.1.4.1.2439.1.4.6.1.33 | ColumnctPerfDeviceRxUncompressedCounts | read-only | mandatory | This is the receive uncompressed byte count for a device Note: When ctPerfShowFractions is OFF this value is expressed in kilobytes |
| 1.3.6.1.4.1.2439.1.4.6.1.34 | ColumnctPerfDeviceRxCompressedCounts | read-only | mandatory | This is the receive compressed byte count for a device Note: When ctPerfShowFractions is OFF this value is expressed in kilobytes |
| 1.3.6.1.4.1.2439.1.4.6.1.35 | ColumnctPerfDeviceCountsStartTime | read-only | mandatory | This is the system time when the last reset device counts command was received |
| 1.3.6.1.4.1.2439.1.4.6.1.36 | ColumnctPerfResetDeviceCounts | read-write | mandatory | This variable is used to reset the transmit, receive, compressed and uncompressed counts for a device |
| 1.3.6.1.4.1.2439.1.4.6.1.37 | ColumnctPerfTxDeviceCompressionRatio | read-only | mandatory | This is the transmit compression ratio for a device |
| 1.3.6.1.4.1.2439.1.4.6.1.38 | ColumnctPerfRxDeviceCompressionRatio | read-only | mandatory | This is the receive compression ratio for a device |
| 1.3.6.1.4.1.2439.1.4.7 | ScalarctPerfResetAllDeviceCounts | read-write | mandatory | This variable is used to reset the transmit, receive, compressed and uncompressed byte counts of all devices back to zero |
| 1.3.6.1.4.1.2439.1.5 | NodectDiagnostics | |||
| 1.3.6.1.4.1.2439.1.5.1 | TablectDiagnosticsTable | not-accessible | mandatory | Diagnostics information for the Channel Extenders |
| 1.3.6.1.4.1.2439.1.5.1.1 | RowctDiagnosticsEntry | not-accessible | mandatory | Diagnostics information for each hardware module of the Channel Extender. |
| 1.3.6.1.4.1.2439.1.5.1.1.1 | ColumnctDiagSlotIndex | read-only | mandatory | Slot index of the hardware module where the diagnostics test is being performed |
| 1.3.6.1.4.1.2439.1.5.1.1.2 | ColumnctDiagBoardIndex | read-only | mandatory | Board index of the slot where the diagnostics test is being performed. |
| 1.3.6.1.4.1.2439.1.5.1.1.3 | ColumnctDiagPortIndex | read-only | mandatory | Port index of the board where the diagnostics test is being performed. |
| 1.3.6.1.4.1.2439.1.5.1.1.5 | ColumnctDiagName | read-write | mandatory | Same as the ctHwName object |
| 1.3.6.1.4.1.2439.1.5.1.1.6 | ColumnctDiagType | read-only | mandatory | Same as the ctHwType |
| 1.3.6.1.4.1.2439.1.5.1.1.7 | ColumnctDiagTestNumber | read-only | mandatory | Current Test Number |
| 1.3.6.1.4.1.2439.1.5.1.1.8 | ColumnctDiagPassCount | read-only | mandatory | |
| 1.3.6.1.4.1.2439.1.5.1.1.9 | ColumnctDiagStatus | read-only | mandatory | Same as the ctHwStatus |
| 1.3.6.1.4.1.2439.1.6 | NodectPowerSupply | |||
| 1.3.6.1.4.1.2439.1.6.1 | ScalarctPsA_Status | read-only | mandatory | |
| 1.3.6.1.4.1.2439.1.6.2 | ScalarctPsB_Status | read-only | mandatory | |
| 1.3.6.1.4.1.2439.1.6.3 | ScalarctPsAlertFlag | read-only | mandatory | |
| 1.3.6.1.4.1.2439.1.6.4 | ScalarctPsFirstFailTime | read-only | mandatory | |
| 1.3.6.1.4.1.2439.1.6.5 | ScalarctPsA_ACErrors | read-only | mandatory | |
| 1.3.6.1.4.1.2439.1.6.6 | ScalarctPsA_DCErrors | read-only | mandatory | |
| 1.3.6.1.4.1.2439.1.6.7 | ScalarctPsB_ACErrors | read-only | mandatory | |
| 1.3.6.1.4.1.2439.1.6.8 | ScalarctPsB_DCErrors | read-only | mandatory | |
| 1.3.6.1.4.1.2439.1.7 | NodectTraps | |||
| 1.3.6.1.4.1.2439.1.7.1 | TablectAbortTable | not-accessible | mandatory | Channel Extender Aborts History Table |
| 1.3.6.1.4.1.2439.1.7.1.1 | RowctAbortEntry | not-accessible | mandatory | Channel Extender Aborts History Table Entry |
| 1.3.6.1.4.1.2439.1.7.1.1.1 | ColumnctAbortIndex | read-only | mandatory | This index uniquely identifies an entry in the Abort Table. Although the maximum number of entries in the table is limited to some pre-determined value (20 in … |
| 1.3.6.1.4.1.2439.1.7.1.1.2 | ColumnctAbortAlertTimeStamp | read-only | mandatory | Trap occurence time expressed in local time zone |
| 1.3.6.1.4.1.2439.1.7.1.1.3 | ColumnctAbortAlertShortDescription | read-only | mandatory | Short Description of the abort or alert being described |
| 1.3.6.1.4.1.2439.1.7.1.1.4 | ColumnctAbortAlertDescription | read-only | mandatory | Full description of the abort or alert being described |