COMTEK-VMS-NM-SYSMGR-MIB
464 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.597 | Nodecomtek | |||
| 1.3.6.1.4.1.597.4 | NodecomtekVms | |||
| 1.3.6.1.4.1.597.4.3 | NodecomtekVmsNMSysMgrMib | |||
| 1.3.6.1.4.1.597.4.3.1 | NodesResources | |||
| 1.3.6.1.4.1.597.4.3.1.1 | NodesSyi | |||
| 1.3.6.1.4.1.597.4.3.1.1.1 | ScalarsSyiNodeName | read-only | mandatory | The name of the node. |
| 1.3.6.1.4.1.597.4.3.1.1.2 | ScalarsSyiHwName | read-only | mandatory | The hardware model name. |
| 1.3.6.1.4.1.597.4.3.1.1.3 | ScalarsSyiBootTime | read-only | mandatory | The date and time when the system was booted. This value is in the form dd-mmm-yyyy hh:mm:ss.cc. |
| 1.3.6.1.4.1.597.4.3.1.1.4 | ScalarsSyiVersion | read-only | mandatory | The software version number of the OpenVMS operating system running on the node. |
| 1.3.6.1.4.1.597.4.3.1.1.5 | ScalarsSyiMemSize | read-only | mandatory | The total number of pages of physical memory in the system configuration. This value is static. |
| 1.3.6.1.4.1.597.4.3.1.1.6 | ScalarsSyiAvailCpuCnt | read-only | mandatory | The number of CPUs which were available at system bootstrap. This value is static. |
| 1.3.6.1.4.1.597.4.3.1.1.7 | ScalarsSyiActiveCpuCnt | read-only | mandatory | Number of active CPUs. |
| 1.3.6.1.4.1.597.4.3.1.1.8 | ScalarsSyiPgSize | read-only | mandatory | The number of pages in the currently installed page files. |
| 1.3.6.1.4.1.597.4.3.1.1.9 | ScalarsSyiPgFree | read-only | mandatory | The number of free pages in the currently installed page files. |
| 1.3.6.1.4.1.597.4.3.1.1.10 | ScalarsSyiPgUsedPercent | read-only | mandatory | The percent full of the currently installed page files. |
| 1.3.6.1.4.1.597.4.3.1.1.11 | ScalarsSyiSwpSize | read-only | mandatory | The number of pages in the currently installed swapping files. |
| 1.3.6.1.4.1.597.4.3.1.1.12 | ScalarsSyiSwpFree | read-only | mandatory | The number of free pages in the currently installed swapping files. |
| 1.3.6.1.4.1.597.4.3.1.1.13 | ScalarsSyiSwpUsedPercent | read-only | mandatory | The percent full of the currently installed swapping files. |
| 1.3.6.1.4.1.597.4.3.1.1.14 | ScalarsSyiCpuPgSize | read-only | mandatory | The number of CPU-specific bytes per page in the system. On VAX systems, this value is always 512. On Alpha systems, CPU page size varies from system to system. |
| 1.3.6.1.4.1.597.4.3.1.1.15 | ScalarsSyiTime | read-only | mandatory | Subagent up time (sCfgUpTime) when system information (sSyi) was last gathered. sCfgSysInfoTimer controls how often system statistics are gathered. |
| 1.3.6.1.4.1.597.4.3.1.1.16 | ScalarsSyiMemFreePg | read-only | mandatory | Number of free pages of physical memory on the system. |
| 1.3.6.1.4.1.597.4.3.1.1.17 | ScalarsSyiMemUsed | read-only | mandatory | Physical memory percentage used. |
| 1.3.6.1.4.1.597.4.3.1.2 | NodesCpu | |||
| 1.3.6.1.4.1.597.4.3.1.2.1 | ScalarsCpuPercentUsed | read-only | mandatory | The percent utilization of all CPUs, i.e., the percent of time the combined CPUs were not idle during the last one minute interval. |
| 1.3.6.1.4.1.597.4.3.1.2.2 | ScalarsIntPercentUsed | read-only | mandatory | The percent of time the combined CPUs spent in interrupt mode during the last one minute interval. |
| 1.3.6.1.4.1.597.4.3.1.2.3 | ScalarsCpuTicks | read-only | mandatory | Number of interval timer ticks that have occurred since the last time CPU statistics were gathered (approximately one minute). This value is the sum of the one… |
| 1.3.6.1.4.1.597.4.3.1.2.4 | NodesCpuLoadOneMinute | |||
| 1.3.6.1.4.1.597.4.3.1.2.4.1 | ScalarsKernelOne | read-only | mandatory | Time in Kernel mode for all CPUs during the last one minute interval. This value indicates the number of ticks in kernel mode on the kernel stack, when no spin… |
| 1.3.6.1.4.1.597.4.3.1.2.4.2 | ScalarsExecOne | read-only | mandatory | Number of interval timer ticks in Executive mode for all CPUs during the last one minute interval. |
| 1.3.6.1.4.1.597.4.3.1.2.4.3 | ScalarsSuprOne | read-only | mandatory | Number of interval timer ticks in Supervisor mode for all CPUs during the last one minute interval. |
| 1.3.6.1.4.1.597.4.3.1.2.4.4 | ScalarsUserOne | read-only | mandatory | Number of interval timer ticks in User mode for all CPUs during the last one minute interval. |
| 1.3.6.1.4.1.597.4.3.1.2.4.5 | ScalarsIntrOne | read-only | mandatory | Time in Interrupt mode for all CPUs during the last one minute interval. This value indicates the number of interval timer ticks in Kernel mode on the Interrup… |
| 1.3.6.1.4.1.597.4.3.1.2.4.6 | ScalarsCompOne | read-only | mandatory | Number of interval timer ticks in Compatibility mode for all CPUs during the last one minute interval. |
| 1.3.6.1.4.1.597.4.3.1.2.4.7 | ScalarsSpinOne | read-only | mandatory | Number of interval timer ticks in mpsynch mode (i.e., Kernel mode on kernel or interrupt stack, when spinlock busy wait is active) for all CPUs during the last… |
| 1.3.6.1.4.1.597.4.3.1.2.4.8 | ScalarsNullOne | read-only | mandatory | CPU idle time for all CPUs during the last one minute interval. This value is measured in interval timer ticks. |
| 1.3.6.1.4.1.597.4.3.1.2.5 | NodesCpuLoadFiveMinute | |||
| 1.3.6.1.4.1.597.4.3.1.2.5.1 | ScalarsKernelFive | read-only | mandatory | Number of ticks spent in Kernel mode during the past five minutes. |
| 1.3.6.1.4.1.597.4.3.1.2.5.2 | ScalarsExecFive | read-only | mandatory | Number of ticks spent in Executive mode during the past five minutes. |
| 1.3.6.1.4.1.597.4.3.1.2.5.3 | ScalarsSuprFive | read-only | mandatory | Number of ticks spent in Supervisor mode during the past five minutes. |
| 1.3.6.1.4.1.597.4.3.1.2.5.4 | ScalarsUserFive | read-only | mandatory | Number of ticks spent in User mode during the past five minutes. |
| 1.3.6.1.4.1.597.4.3.1.2.5.5 | ScalarsIntrFive | read-only | mandatory | Number of ticks spent in Interrupt mode during the past five minutes. |
| 1.3.6.1.4.1.597.4.3.1.2.5.6 | ScalarsCompFive | read-only | mandatory | Number of ticks spent in Compatibility mode during the past five minutes. |
| 1.3.6.1.4.1.597.4.3.1.2.5.7 | ScalarsSpinFive | read-only | mandatory | Number of ticks spent in Spin mode during the past five minutes. |
| 1.3.6.1.4.1.597.4.3.1.2.5.8 | ScalarsNullFive | read-only | mandatory | Number of ticks the CPUs were idle during the past five minutes. |
| 1.3.6.1.4.1.597.4.3.1.2.6 | NodesCpuLoadFifteenMinute | |||
| 1.3.6.1.4.1.597.4.3.1.2.6.1 | ScalarsKernelFifteen | read-only | mandatory | Number of ticks spent in Kernel mode during the past fifteen minutes. |
| 1.3.6.1.4.1.597.4.3.1.2.6.2 | ScalarsExecFifteen | read-only | mandatory | Number of ticks spent in Executive mode during the past fifteen minutes. |
| 1.3.6.1.4.1.597.4.3.1.2.6.3 | ScalarsSuprFifteen | read-only | mandatory | Number of ticks spent in Supervisor mode during the past fifteen minutes. |
| 1.3.6.1.4.1.597.4.3.1.2.6.4 | ScalarsUserFifteen | read-only | mandatory | Number of ticks spent in User mode during the past fifteen minutes. |
| 1.3.6.1.4.1.597.4.3.1.2.6.5 | ScalarsIntrFifteen | read-only | mandatory | Number of ticks spent in Interrupt mode during the past fifteen minutes. |
| 1.3.6.1.4.1.597.4.3.1.2.6.6 | ScalarsCompFifteen | read-only | mandatory | Number of ticks spent in Compatibility mode during the past fifteen minutes. |
| 1.3.6.1.4.1.597.4.3.1.2.6.7 | ScalarsSpinFifteen | read-only | mandatory | Number of ticks spent in Spin mode during the past fifteen minutes. |
| 1.3.6.1.4.1.597.4.3.1.2.6.8 | ScalarsNullFifteen | read-only | mandatory | Number of ticks the CPUs were idle during the past fifteen minutes. |
| 1.3.6.1.4.1.597.4.3.1.3 | NodesDsk | |||
| 1.3.6.1.4.1.597.4.3.1.3.1 | ScalarsDskTblCnt | read-only | mandatory | Number of entries in the disk table. |
| 1.3.6.1.4.1.597.4.3.1.3.2 | ScalarsDskTblTime | read-only | mandatory | Subagent up time (sCfgUpTime) when disk statistics (sDskTbl) were last gathered. sCfgDskTimer controls how often disk statistics are gathered. |
| 1.3.6.1.4.1.597.4.3.1.3.3 | TablesDskTbl | not-accessible | mandatory | Table of disk information. |
| 1.3.6.1.4.1.597.4.3.1.3.3.1 | RowsDskEntry | not-accessible | mandatory | A row in the disk table. |
| 1.3.6.1.4.1.597.4.3.1.3.3.1.1 | ColumnsDskIndex | read-only | mandatory | Location in the disk table. |
| 1.3.6.1.4.1.597.4.3.1.3.3.1.2 | ColumnsDskName | read-only | mandatory | Device name. |
| 1.3.6.1.4.1.597.4.3.1.3.3.1.3 | ColumnsDskUsedPercent | read-only | mandatory | The disk percent full. |
| 1.3.6.1.4.1.597.4.3.1.3.3.1.4 | ColumnsDskOps | read-only | mandatory | The average number of disk operations per second during the last disk statistics update interval. (The disk statistics update frequency is determined by the va… |
| 1.3.6.1.4.1.597.4.3.1.3.3.1.5 | ColumnsDskMountCnt | read-only | mandatory | The mount count for the volume. |
| 1.3.6.1.4.1.597.4.3.1.3.3.1.6 | ColumnsDskRefCnt | read-only | mandatory | The number of channels assigned to the device. |
| 1.3.6.1.4.1.597.4.3.1.3.3.1.7 | ColumnsDskTransCnt | read-only | mandatory | The transaction count for the volume. |
| 1.3.6.1.4.1.597.4.3.1.3.3.1.8 | ColumnsDskMediaName | read-only | mandatory | The name of the volume type. |
| 1.3.6.1.4.1.597.4.3.1.3.3.1.9 | ColumnsDskOpCnt | read-only | mandatory | The operation count for the volume. |
| 1.3.6.1.4.1.597.4.3.1.3.3.1.10 | ColumnsDskFreeBlocks | read-only | mandatory | The number of free blocks on the disk. |
| 1.3.6.1.4.1.597.4.3.1.3.3.1.11 | ColumnsDskMaxBlocks | read-only | mandatory | The maximum number of blocks on the volume. |
| 1.3.6.1.4.1.597.4.3.1.3.3.1.12 | ColumnsDskStatus | read-only | mandatory | The device unit status for the physical disk or virtual disk. This value is a bit vector which, when set, corresponds to the following states: Bit Description … |
| 1.3.6.1.4.1.597.4.3.1.3.3.1.13 | ColumnsDskDevChar | read-only | mandatory | The disk device-independent characteristics of the disk. This value is a bit vector which, when set, corresponds to the following characteristic: Bit Descripti… |
| 1.3.6.1.4.1.597.4.3.1.3.3.1.14 | ColumnsDskLogVolName | read-only | mandatory | The logical name of the volume or volume set. |
| 1.3.6.1.4.1.597.4.3.1.3.3.1.15 | ColumnsDskTrapPercent | read-only | mandatory | The percentage of disk space utilization at which excessive disk utilization (sDskFull) traps begin to be sent for this disk. A value of 0 indicates that eithe… |
| 1.3.6.1.4.1.597.4.3.1.3.3.1.16 | ColumnsDskTrapBlocks | read-only | mandatory | The minimum number of free disk blocks required for this disk. If the actual number of free blocks on the disk drops below this level, disk utilization (sDskFu… |
| 1.3.6.1.4.1.597.4.3.1.3.3.1.17 | ColumnsDskShdCount | read-only | mandatory | The number of shadow set members that make up this virtual unit. If this number is zero, then this is not a virtual disk. This number indicates the number of s… |
| 1.3.6.1.4.1.597.4.3.1.3.3.1.18 | ColumnsDskTrapOpSec | read-only | mandatory | The number of operations per second at which excessive disk (sDskOpSec) traps begin to be sent for this disk. A value of 0 indicates that the system default di… |
| 1.3.6.1.4.1.597.4.3.1.3.3.1.19 | ColumnsDskQueueLength | read-only | mandatory | I/O queue length for this disk. |
| 1.3.6.1.4.1.597.4.3.1.3.3.1.20 | ColumnsDskRemote | read-only | mandatory | A value of true(1) indicates that the device is a remote device; a value of false(2) indicates that it is not a remote device. A remote device is a device that… |
| 1.3.6.1.4.1.597.4.3.1.4 | NodesShd | |||
| 1.3.6.1.4.1.597.4.3.1.4.1 | TablesShdTbl | not-accessible | mandatory | Table of shadow set information. |
| 1.3.6.1.4.1.597.4.3.1.4.1.1 | RowsShdEntry | not-accessible | mandatory | A row in the shadow table. The combination of the sDskIndex and sShdIndex indices relates each shadow set table entry (sShdEntry) to its virtual unit entry in … |
| 1.3.6.1.4.1.597.4.3.1.4.1.1.1 | ColumnsShdIndex | read-only | mandatory | Location in the shadow set table. |
| 1.3.6.1.4.1.597.4.3.1.4.1.1.2 | ColumnsShdName | read-only | mandatory | Device name of the shadow set disk. |
| 1.3.6.1.4.1.597.4.3.1.4.1.1.3 | ColumnsShdFail | read-only | mandatory | Indicator for shadow set member failure. A value of true(1) indicates that this member has failed out of the shadow set. |
| 1.3.6.1.4.1.597.4.3.1.4.1.1.4 | ColumnsShdCopy | read-only | mandatory | Indicator for shadow set catch-up copying. A value of true(1) indicates that this member is in a catch-up copy state. |
| 1.3.6.1.4.1.597.4.3.1.4.1.1.5 | ColumnsShdMerge | read-only | mandatory | Indicator for shadow set member merge. A value of true(1) indicates that this member is in a merge state. |
| 1.3.6.1.4.1.597.4.3.1.5 | NodesQue | |||
| 1.3.6.1.4.1.597.4.3.1.5.1 | ScalarsQueCnt | read-only | mandatory | Number of queues currently being monitored. This number is the number of queue names found in the sCfgQueFile file. |
| 1.3.6.1.4.1.597.4.3.1.5.2 | ScalarsQueTime | read-only | mandatory | Subagent up time (sCfgUpTime) when queue statistics (sQTbl) were last gathered. sCfgQueTimer controls how often queue statistics are gathered. |
| 1.3.6.1.4.1.597.4.3.1.5.3 | TablesQTbl | not-accessible | mandatory | Table of queue information. |
| 1.3.6.1.4.1.597.4.3.1.5.3.1 | RowsQTblEntry | not-accessible | mandatory | A row in the queue table. |
| 1.3.6.1.4.1.597.4.3.1.5.3.1.1 | ColumnsQIndex | read-only | mandatory | Location in the queue table. |
| 1.3.6.1.4.1.597.4.3.1.5.3.1.2 | ColumnsQName | read-only | mandatory | Name of the queue. |
| 1.3.6.1.4.1.597.4.3.1.5.3.1.3 | ColumnsQMonitor | read-write | mandatory | Indicates if the queue and its entries are currently being monitored. A value of true(1) indicates that this queue and its entries are currently being monitore… |
| 1.3.6.1.4.1.597.4.3.1.5.3.1.4 | ColumnsQStatus | read-only | mandatory | Queue status indicates the current settings of the queue status flags. This value is a bit vector which, when set, corresponds to the following characteristic:… |
| 1.3.6.1.4.1.597.4.3.1.5.3.1.5 | ColumnsQEntryCount | read-only | mandatory | Number of current queue entries. This number also identifies the number of rows in the sQEntryTbl for this queue. |
| 1.3.6.1.4.1.597.4.3.1.5.4 | TablesQEntryTbl | not-accessible | mandatory | Table of queue entry information. |
| 1.3.6.1.4.1.597.4.3.1.5.4.1 | RowsQEntry | not-accessible | mandatory | A row in the queue entry table. |
| 1.3.6.1.4.1.597.4.3.1.5.4.1.1 | ColumnsQEntryNum | read-only | mandatory | The queue entry number of this job. |
| 1.3.6.1.4.1.597.4.3.1.5.4.1.2 | ColumnsQEntryJobname | read-only | mandatory | The job name of this queue entry. |
| 1.3.6.1.4.1.597.4.3.1.5.4.1.3 | ColumnsQEntryJobStatus | read-only | mandatory | Queue status indicates the current settings of the queue status flags. This value is a bit vector which, when set, corresponds to the following characteristic:… |
| 1.3.6.1.4.1.597.4.3.1.5.5 | NodesQueBatch | |||
| 1.3.6.1.4.1.597.4.3.1.5.5.1 | ScalarsQueBatchPending | read-only | mandatory | Number of pending jobs in the batch queue. |
| 1.3.6.1.4.1.597.4.3.1.5.5.2 | ScalarsQueBatchExecuting | read-only | mandatory | Number of executing jobs in the batch queue. |
| 1.3.6.1.4.1.597.4.3.1.5.5.3 | ScalarsQueBatchTimed | read-only | mandatory | Number of timed jobs in the batch queue. |
| 1.3.6.1.4.1.597.4.3.1.5.5.4 | ScalarsQueBatchHolding | read-only | mandatory | Number of holding jobs in the batch queue. |
| 1.3.6.1.4.1.597.4.3.1.5.5.5 | ScalarsQueBatchRetained | read-only | mandatory | Number of retained jobs in the batch queue. |
| 1.3.6.1.4.1.597.4.3.1.5.6 | NodesQueGeneric | |||
| 1.3.6.1.4.1.597.4.3.1.5.6.1 | ScalarsQueGenericPending | read-only | mandatory | Number of pending jobs in generic queues. |
| 1.3.6.1.4.1.597.4.3.1.5.6.2 | ScalarsQueGenericExecuting | read-only | mandatory | Number of executing jobs in generic queues. |
| 1.3.6.1.4.1.597.4.3.1.5.6.3 | ScalarsQueGenericTimed | read-only | mandatory | Number of timed jobs in generic queues. |
| 1.3.6.1.4.1.597.4.3.1.5.6.4 | ScalarsQueGenericHolding | read-only | mandatory | Number of holding jobs in generic queues. |
| 1.3.6.1.4.1.597.4.3.1.5.6.5 | ScalarsQueGenericRetained | read-only | mandatory | Number of retained jobs in generic queues. |
| 1.3.6.1.4.1.597.4.3.1.5.7 | NodesQuePrinter | |||
| 1.3.6.1.4.1.597.4.3.1.5.7.1 | ScalarsQuePrinterPending | read-only | mandatory | Number of pending jobs in printer queues. |
| 1.3.6.1.4.1.597.4.3.1.5.7.2 | ScalarsQuePrinterExecuting | read-only | mandatory | Number of executing jobs in printer queues. |
| 1.3.6.1.4.1.597.4.3.1.5.7.3 | ScalarsQuePrinterTimed | read-only | mandatory | Number of timed jobs in printer queues. |
| 1.3.6.1.4.1.597.4.3.1.5.7.4 | ScalarsQuePrinterHolding | read-only | mandatory | Number of holding jobs in printer queues. |
| 1.3.6.1.4.1.597.4.3.1.5.7.5 | ScalarsQuePrinterRetained | read-only | mandatory | Number of retained jobs in printer queues. |
| 1.3.6.1.4.1.597.4.3.1.5.8 | NodesQueServer | |||
| 1.3.6.1.4.1.597.4.3.1.5.8.1 | ScalarsQueServerPending | read-only | mandatory | Number of pending jobs in server queues. |
| 1.3.6.1.4.1.597.4.3.1.5.8.2 | ScalarsQueServerExecuting | read-only | mandatory | Number of executing jobs in server queues. |
| 1.3.6.1.4.1.597.4.3.1.5.8.3 | ScalarsQueServerTimed | read-only | mandatory | Number of timed jobs in server queues. |
| 1.3.6.1.4.1.597.4.3.1.5.8.4 | ScalarsQueServerHolding | read-only | mandatory | Number of holding jobs in server queues. |
| 1.3.6.1.4.1.597.4.3.1.5.8.5 | ScalarsQueServerRetained | read-only | mandatory | Number of retained jobs in server queues. |
| 1.3.6.1.4.1.597.4.3.1.5.9 | NodesQueSymbiont | |||
| 1.3.6.1.4.1.597.4.3.1.5.9.1 | ScalarsQueSymbiontPending | read-only | mandatory | Number of pending jobs in symbiont queues. |
| 1.3.6.1.4.1.597.4.3.1.5.9.2 | ScalarsQueSymbiontExecuting | read-only | mandatory | Number of executing jobs in symbiont queues. |
| 1.3.6.1.4.1.597.4.3.1.5.9.3 | ScalarsQueSymbiontTimed | read-only | mandatory | Number of timed jobs in symbiont queues. |
| 1.3.6.1.4.1.597.4.3.1.5.9.4 | ScalarsQueSymbiontHolding | read-only | mandatory | Number of holding jobs in symbiont queues. |
| 1.3.6.1.4.1.597.4.3.1.5.9.5 | ScalarsQueSymbiontRetained | read-only | mandatory | Number of retained jobs in symbiont queues. |
| 1.3.6.1.4.1.597.4.3.1.5.10 | NodesQueTerminal | |||
| 1.3.6.1.4.1.597.4.3.1.5.10.1 | ScalarsQueTerminalPending | read-only | mandatory | Number of pending jobs in terminal queues. |
| 1.3.6.1.4.1.597.4.3.1.5.10.2 | ScalarsQueTerminalExecuting | read-only | mandatory | Number of executing jobs in terminal queues. |
| 1.3.6.1.4.1.597.4.3.1.5.10.3 | ScalarsQueTerminalTimed | read-only | mandatory | Number of timed jobs in terminal queues. |
| 1.3.6.1.4.1.597.4.3.1.5.10.4 | ScalarsQueTerminalHolding | read-only | mandatory | Number of holding jobs in terminal queues. |
| 1.3.6.1.4.1.597.4.3.1.5.10.5 | ScalarsQueTerminalRetained | read-only | mandatory | Number of retained jobs in terminal queues. |
| 1.3.6.1.4.1.597.4.3.1.5.11 | NodesQMan | |||
| 1.3.6.1.4.1.597.4.3.1.5.11.1 | ScalarsQManCount | read-only | mandatory | Number of entries in the queue manager table. |
| 1.3.6.1.4.1.597.4.3.1.5.11.2 | TablesQManTbl | not-accessible | mandatory | Table of queue manager information. |
| 1.3.6.1.4.1.597.4.3.1.5.11.2.1 | RowsQManTblEntry | not-accessible | mandatory | A row in the queue manager table. |
| 1.3.6.1.4.1.597.4.3.1.5.11.2.1.1 | ColumnsQManIndex | read-only | mandatory | Location in the queue manager table. |
| 1.3.6.1.4.1.597.4.3.1.5.11.2.1.2 | ColumnsQManName | read-only | mandatory | Name of the queue manager. |
| 1.3.6.1.4.1.597.4.3.1.5.11.2.1.3 | ColumnsQManStatus | read-only | mandatory | Queue manager status indicates the current settings of the queue manger status flags. This value is a bit vector which, when set, corresponds to the following … |
| 1.3.6.1.4.1.597.4.3.2 | NodesProcesses | |||
| 1.3.6.1.4.1.597.4.3.2.1 | NodesProcInfo | |||
| 1.3.6.1.4.1.597.4.3.2.1.1 | ScalarsPsCnt | read-only | mandatory | Number of processes currently running of the system. |
| 1.3.6.1.4.1.597.4.3.2.1.2 | ScalarsPsTime | read-only | mandatory | Subagent up time (sCfgUpTime) when process statistics (sPsTbl) were last gathered. sCfgPsTimer controls how often process statistics are gathered. |
| 1.3.6.1.4.1.597.4.3.2.1.3 | TablesPsTbl | not-accessible | mandatory | Table of process information. |
| 1.3.6.1.4.1.597.4.3.2.1.3.1 | RowsPsEntry | not-accessible | mandatory | A row in the process table. |
| 1.3.6.1.4.1.597.4.3.2.1.3.1.1 | ColumnsPsPID | read-only | mandatory | The VMS process identification (PID) of the process. |
| 1.3.6.1.4.1.597.4.3.2.1.3.1.2 | ColumnsPsProcName | read-only | mandatory | The process name. |
| 1.3.6.1.4.1.597.4.3.2.1.3.1.3 | ColumnsPsState | read-only | mandatory | The state of the process. |
| 1.3.6.1.4.1.597.4.3.2.1.3.1.4 | ColumnsPsPriority | read-only | mandatory | The current priority of the process. |
| 1.3.6.1.4.1.597.4.3.2.1.3.1.5 | ColumnsPsDirectIO | read-only | mandatory | The count of the direct I/O operations performed by this process. If sCfgAllPsData is set to no(2), this value may be zero. |
| 1.3.6.1.4.1.597.4.3.2.1.3.1.6 | ColumnsPsCpuTime | read-only | mandatory | The process' accumulated CPU time. If sCfgAllPsData is set to no(2), this value may be zero. |
| 1.3.6.1.4.1.597.4.3.2.1.3.1.7 | ColumnsPsPgFaults | read-only | mandatory | The total number of page faults incurred by the process. If sCfgAllPsData is set to no(2), this value may be zero. |
| 1.3.6.1.4.1.597.4.3.2.1.3.1.8 | ColumnsPsWorkSetSize | read-only | mandatory | The current working set size (in pages) of the process. If sCfgAllPsData is set to no(2), this value may be zero. |
| 1.3.6.1.4.1.597.4.3.2.1.3.1.9 | ColumnsPsUsername | read-only | mandatory | The owner username of the process. This string is always blank padded to a length of 12 characters. |
| 1.3.6.1.4.1.597.4.3.2.1.3.1.10 | ColumnsPsPhysTerm | read-only | mandatory | The physical device name of the terminal associated with the process. |
| 1.3.6.1.4.1.597.4.3.2.1.3.1.11 | ColumnsPsImageName | read-only | mandatory | The directory specification and image file name. If sCfgAllPsData is set to no(2), this value may be zero. |
| 1.3.6.1.4.1.597.4.3.2.1.3.1.12 | ColumnsPsLoginTime | read-only | mandatory | The time at which the process was created. This value is in dd-mmm-yyyy hh:mm:ss.cc format. If sCfgAllPsData is set to no(2), this value may be zero. |
| 1.3.6.1.4.1.597.4.3.2.1.3.1.13 | ColumnsPsPgTblCnt | read-only | mandatory | The number of pages the process has in its working set. |
| 1.3.6.1.4.1.597.4.3.2.1.3.1.14 | ColumnsPsMode | read-only | mandatory | The mode of the process. |
| 1.3.6.1.4.1.597.4.3.2.1.3.1.15 | ColumnsPsRWState | read-only | mandatory | The resource wait state of the process. This variable is only meaningful when a process is in the MWAIT state (i.e., when sPsState is set to MWAIT(2)), otherwi… |
| 1.3.6.1.4.1.597.4.3.2.1.4 | ScalarsPsCOMQueue | read-only | mandatory | Number of processes that are waiting to compute, i.e., the number of processes with a sPsState of COM. |
| 1.3.6.1.4.1.597.4.3.2.1.5 | ScalarsPsCOMOQueue | read-only | mandatory | Number of outswapped processes that are waiting to compute, i.e., the number of processes with a sPsState of COMO. |
| 1.3.6.1.4.1.597.4.3.2.1.6 | ScalarsPsOther | read-only | mandatory | Count of other mode processes i.e., those processes that are not network, batch or interactive. |
| 1.3.6.1.4.1.597.4.3.2.1.7 | ScalarsPsNetwork | read-only | mandatory | Count of network processes. |
| 1.3.6.1.4.1.597.4.3.2.1.8 | ScalarsPsBatch | read-only | mandatory | Count of batch processes. |
| 1.3.6.1.4.1.597.4.3.2.1.9 | ScalarsPsInteractive | read-only | mandatory | Count of Interactive processes. |
| 1.3.6.1.4.1.597.4.3.2.1.10 | ScalarsPsAvailProcSlots | read-only | mandatory | Count of Available Process Slots. |
| 1.3.6.1.4.1.597.4.3.2.2 | NodesCritInfo | |||
| 1.3.6.1.4.1.597.4.3.2.2.1 | ScalarsCritCnt | read-only | mandatory | Number of critical process table entries. |
| 1.3.6.1.4.1.597.4.3.2.2.2 | ScalarsCritTime | read-only | mandatory | Subagent up time (sCfgUpTime) when critical process statistics (sCritTbl) were last gathered. sCfgCritTimer specifies how often critical process statistics are… |
| 1.3.6.1.4.1.597.4.3.2.2.3 | TablesCritTbl | not-accessible | mandatory | Table of critical process information. |
| 1.3.6.1.4.1.597.4.3.2.2.3.1 | RowsCritEntry | not-accessible | mandatory | A row in the critical process table. |
| 1.3.6.1.4.1.597.4.3.2.2.3.1.1 | ColumnsCritIndex | read-only | mandatory | Location in the critical process table. |
| 1.3.6.1.4.1.597.4.3.2.2.3.1.2 | ColumnsCritName | read-only | mandatory | Name of a critical process. Critical process names may contain * and % wildcard characters. |
| 1.3.6.1.4.1.597.4.3.2.2.3.1.3 | ColumnsCritReqCnt | read-only | mandatory | Minimum number of copies of this process required to be running on the system. |
| 1.3.6.1.4.1.597.4.3.2.2.3.1.4 | ColumnsCritCurCnt | read-only | mandatory | The current number of copies of this process running on the system. |
| 1.3.6.1.4.1.597.4.3.3 | NodesTrapInfo | |||
| 1.3.6.1.4.1.597.4.3.3.1 | ScalarsTrapNextSeqNum | read-only | mandatory | The next sequence number in the trap table. When this variable is sent as part of a trap, it identifies the sequence number assigned to that trap. This is a 32… |
| 1.3.6.1.4.1.597.4.3.3.2 | ScalarsTrapTime | read-only | mandatory | Subagent up time (sCfgUpTime) when the trap was created. |
| 1.3.6.1.4.1.597.4.3.3.3 | ScalarsTrapResendSeqNum | read-write | mandatory | Sequence number of a trap message to be resent to the manager. Setting this variable to a trap sequence number causes the specified trap message to be resent. … |
| 1.3.6.1.4.1.597.4.3.3.4 | ScalarsTrapLastSeqNumSent | read-only | mandatory | Sequence number of the last trap sent. This value may be compared to sTrapNextSeqNum to determine if a backlog of traps exists. If this value is one less than … |
| 1.3.6.1.4.1.597.4.3.3.5 | ScalarsTrapLostCount | read-only | mandatory | This variable indicates the number of traps that have been lost. A trap is considered to be lost if it is overwritten in the internal trap table before it is s… |
| 1.3.6.1.4.1.597.4.3.4 | NodesErrInfo | |||
| 1.3.6.1.4.1.597.4.3.4.1 | NodesHwErrInfo | |||
| 1.3.6.1.4.1.597.4.3.4.1.1 | ScalarsHwErrDeviceCnt | read-only | mandatory | Number of devices reporting errors. |
| 1.3.6.1.4.1.597.4.3.4.1.2 | ScalarsHwErrTime | read-only | mandatory | Subagent up time (sCfgUpTime) when hardware error statistics were last gathered. |
| 1.3.6.1.4.1.597.4.3.4.1.3 | TablesHwErrTbl | not-accessible | mandatory | Table of hardware errors. |
| 1.3.6.1.4.1.597.4.3.4.1.3.1 | RowsHwErrEntry | not-accessible | mandatory | A row in the hardware error table. |
| 1.3.6.1.4.1.597.4.3.4.1.3.1.1 | ColumnsHwErrIndex | read-only | mandatory | Location in the hardware error table. |
| 1.3.6.1.4.1.597.4.3.4.1.3.1.2 | ColumnsHwErrDeviceName | read-only | mandatory | Name of the device. |
| 1.3.6.1.4.1.597.4.3.4.1.3.1.3 | ColumnsHwErrCnt | read-only | mandatory | Number of errors reported by the device since last reboot of the system. |
| 1.3.6.1.4.1.597.4.3.4.1.3.1.4 | ColumnsHwErrLastTime | read-only | mandatory | sCfgUpTime when the latest error was detected by the NM*SysMgr Subagent. |
| 1.3.6.1.4.1.597.4.3.4.2 | NodesSwErrInfo | |||
| 1.3.6.1.4.1.597.4.3.4.2.1 | ScalarsSwErrStatus | read-only | mandatory | The latest software status code. |
| 1.3.6.1.4.1.597.4.3.4.2.2 | ScalarsSwErrFile | read-only | mandatory | The file name of the software element which generated the latest software status code. |
| 1.3.6.1.4.1.597.4.3.4.2.3 | ScalarsSwErrLineNum | read-only | mandatory | The line number in the file which generated the latest software status code. |
| 1.3.6.1.4.1.597.4.3.4.2.4 | ScalarsSwErrLastTime | read-only | mandatory | sCfgUpTime when the most recent software status code was generated. |
| 1.3.6.1.4.1.597.4.3.4.2.5 | ScalarsSwErrMessage | read-only | mandatory | Description of the latest software error. |
| 1.3.6.1.4.1.597.4.3.4.3 | ScalarsOpcomOne | read-only | mandatory | The first 255 characters of the text of the most recent message in the operator log. For opcom messages that exceed 255 characters, the remainder of the messag… |
| 1.3.6.1.4.1.597.4.3.4.4 | ScalarsOpcomTwo | read-only | mandatory | Part 2 of an opcom message. |
| 1.3.6.1.4.1.597.4.3.4.5 | ScalarsOpcomThree | read-only | mandatory | Part 3 of an opcom message. |
| 1.3.6.1.4.1.597.4.3.4.6 | ScalarsOpcomFour | read-only | mandatory | Part 4 of an opcom message. |
| 1.3.6.1.4.1.597.4.3.4.7 | ScalarsOpcomFive | read-only | mandatory | Part 5 of an opcom message. |
| 1.3.6.1.4.1.597.4.3.4.8 | ScalarsOpcomReplyId | read-write | mandatory | Request number to be associated with the operator reply. This number identifies a previous Opcom request. This variable is reset to zero when a reply is succes… |
| 1.3.6.1.4.1.597.4.3.4.9 | ScalarsOpcomReplyStatus | read-write | mandatory | Completion status to accompany opcom reply. This variable is reset to noStatus when a reply is successfully sent. (See sOpcomReplySend.) |
| 1.3.6.1.4.1.597.4.3.4.10 | ScalarsOpcomReplyText | read-write | mandatory | Text to be sent for an operator reply message. This variable is reset to null when a reply is successfully sent. (See sOpcomReplySend.) |
| 1.3.6.1.4.1.597.4.3.4.11 | ScalarsOpcomReplySend | read-write | mandatory | Flag which is used to trigger sending of an operator reply message. To send an operator reply, set the sOpcomReplyId, sOpcomReplyStatus, and sOpcomReplyText va… |
| 1.3.6.1.4.1.597.4.3.4.12 | ScalarsOpcomSix | read-only | mandatory | Part 6 of an opcom message. |
| 1.3.6.1.4.1.597.4.3.4.13 | ScalarsOpcomSeven | read-only | mandatory | Part 7 of an opcom message. |
| 1.3.6.1.4.1.597.4.3.5 | NodesCfg | |||
| 1.3.6.1.4.1.597.4.3.5.1 | ScalarsCfgFile | read-write | mandatory | Name of the file currently being used for NM*SysMgr initialization parameters. This file is identified by the logical name COMTEK$SYSMGR_CONFIG. Changing this … |
| 1.3.6.1.4.1.597.4.3.5.2 | ScalarsCfgLogFile | read-only | mandatory | Name of the log file currently being used by NM*SysMgr. If this process is run interactively, this variable will have the value SYS$OUTPUT: (standard output). |
| 1.3.6.1.4.1.597.4.3.5.3 | ScalarsCfgCritFile | read-write | mandatory | Name of the file currently being used to identify critical processes. This file is associated with the logical name COMTEK$SYSMGR_CRITPROC. Changing this varia… |
| 1.3.6.1.4.1.597.4.3.5.4 | ScalarsCfgReinitSubagent | read-write | mandatory | Flag which may be set to force the NM*SysMgr Subagent to reinitialize. Reinitialization involves resetting the process configuration using the parameters conta… |
| 1.3.6.1.4.1.597.4.3.5.5 | ScalarsCfgTraps | read-write | mandatory | Flag which determines if any trap messages are sent to the NM*Master Agent. Setting this variable to disabled(2) disables all traps from being sent. Configurat… |
| 1.3.6.1.4.1.597.4.3.5.6 | ScalarsCfgHwErrTraps | read-write | mandatory | Flag which determines if hardware error traps (sHwErr) should be sent. Setting this variable to enabled(1) causes a trap to be sent for every error detected. S… |
| 1.3.6.1.4.1.597.4.3.5.7 | ScalarsCfgCpuLimit | read-write | mandatory | The percentage of CPU utilization at which excessive CPU utilization (sCpuUsage) traps begin to be sent. A value of 0 disables these traps. Configuration Varia… |
| 1.3.6.1.4.1.597.4.3.5.8 | ScalarsCfgIntLimit | read-write | mandatory | The percentage of interrupt CPU utilization at which excessive interrupt utilization (sIntUsage) traps begin to be sent. A value of 0 disables these traps. Con… |
| 1.3.6.1.4.1.597.4.3.5.9 | ScalarsCfgDskOps | read-write | mandatory | The threshold at which excessive disk busy traps (sDskOpSec) begin to be sent. This value is expressed in terms of disk operations (reads and writes) per secon… |
| 1.3.6.1.4.1.597.4.3.5.10 | ScalarsCfgDskLimit | read-write | mandatory | The percentage of disk space utilization at which excessive disk utilization (sDskFull) traps begin to be sent. If this variable is set to a value other than z… |
| 1.3.6.1.4.1.597.4.3.5.11 | ScalarsCfgPgLimit | read-write | mandatory | The percentage of page file utilization at which excessive page file utilization (sPgFull) traps begin to be sent. A value of 0 disables these traps. Configura… |
| 1.3.6.1.4.1.597.4.3.5.12 | ScalarsCfgSwpLimit | read-write | mandatory | The percentage of swap file utilization at which excessive swap file utilization (sSwpFull) traps begin to be sent. A value of 0 disables these traps. Configur… |
| 1.3.6.1.4.1.597.4.3.5.13 | ScalarsCfgPsTimer | read-write | mandatory | The number of minutes between updates of the process statistics table (sPsTbl) data. A value of 0 disables gathering of process related data. Configuration Var… |
| 1.3.6.1.4.1.597.4.3.5.14 | ScalarsCfgDskTimer | read-write | mandatory | The number of minutes between updates of the disk table (sDskTbl) data. A value of 0 disables gathering of disk related data. Configuration Variable: DskTimer … |
| 1.3.6.1.4.1.597.4.3.5.15 | ScalarsCfgHwErrTimer | read-write | mandatory | The number of minutes between updates of the hardware error table (sHwErrTbl) data. A value of 0 disables gathering of hardware error data. Configuration Varia… |
| 1.3.6.1.4.1.597.4.3.5.16 | ScalarsCfgSysInfoTimer | read-write | mandatory | The number of minutes between updates of the system information (sSyi) data. A value of 0 disables gathering of system information data. Configuration Variable… |
| 1.3.6.1.4.1.597.4.3.5.17 | ScalarsCfgCritTimer | read-write | mandatory | The number of minutes between critical process table (sCritTbl) updates. A value of 0 disables critical process missing processing. Configuration Variable: Cri… |
| 1.3.6.1.4.1.597.4.3.5.18 | ScalarsCfgDskAlarm | read-write | mandatory | The number of minutes between repeat traps for disk (sDskFull), page file (sPgFull), or swap file full (sSwpFull) conditions. A value of 0 causes only the init… |
| 1.3.6.1.4.1.597.4.3.5.19 | ScalarsCfgCritAlarm | read-write | mandatory | The number of minutes between repeat traps for a given critical process missing condition. Setting this variable to 0 causes only the first instance to generat… |
| 1.3.6.1.4.1.597.4.3.5.20 | ScalarsCfgTrapTblSize | read-write | mandatory | The maximum number of traps to be retained. Traps that are retained may be resent (see sTrapResendSeqNum) unless too many subsequent traps have been generated.… |
| 1.3.6.1.4.1.597.4.3.5.21 | ScalarsCfgHostName | read-only | mandatory | The name of the host that the subagent is communicating with. This is the host name where the NM*Master Agent resides. This variable is not currently used. Con… |
| 1.3.6.1.4.1.597.4.3.5.22 | ScalarsCfgAllPsData | read-write | mandatory | This variable controls the amount of data that is available in the process statistics table (sPsTbl). If this flag is set to no(2), only the process statistics… |
| 1.3.6.1.4.1.597.4.3.5.23 | ScalarsCfgTimeout | read-only | mandatory | This variable identifies the time-out value that is to be used by the subagent during subtree registration. If this value is set to zero, the default value (sa… |
| 1.3.6.1.4.1.597.4.3.5.24 | ScalarsCfgOpcomSecurity | read-write | mandatory | Flag which determines if the opcom security messages are to be sent as opcom traps. Setting this variable to enabled(1) causes opcom trap messages to be sent f… |
| 1.3.6.1.4.1.597.4.3.5.25 | ScalarsCfgControlTermProc | read-only | mandatory | Flag which may be used to disable process termination by the sCfgTermProc variable. Setting this variable to enabled(1) allows the sCfgTermProc variable to be … |
| 1.3.6.1.4.1.597.4.3.5.26 | ScalarsCfgTermProc | read-write | mandatory | Flag which may be used to shutdown the NM*SysMgr process. Setting this flag to true causes the NM*SysMgr process to respond to the set-request, send the sTermP… |
| 1.3.6.1.4.1.597.4.3.5.27 | ScalarsCfgVersion | read-only | mandatory | Current version of the NM*SysMgr Subagent software. |
| 1.3.6.1.4.1.597.4.3.5.28 | ScalarsCfgUpTime | read-only | mandatory | Subagent up time. |
| 1.3.6.1.4.1.597.4.3.5.29 | ScalarsCfgMaxTrapSec | read-write | mandatory | This value specifies the maximum number of traps per second that may be sent. A value of zero disables trap throttling, allowing all traps to be sent as they a… |
| 1.3.6.1.4.1.597.4.3.5.30 | ScalarsCfgCritDsk | read-write | mandatory | Name of the file currently being used to identify critical disk space and operations per second trap thresholds for individual disks. This file contains: disk … |
| 1.3.6.1.4.1.597.4.3.5.31 | ScalarsCfgCritQue | read-write | mandatory | Name of the file currently being used to identify queues to be monitored. This file is associated with the logical name COMTEK$SYSMGR_QUEUE. Changing this vari… |
| 1.3.6.1.4.1.597.4.3.5.32 | ScalarsCfgQueTimer | read-write | mandatory | The number of minutes between updates of the queue statistics table (sQTbl) data. A value of 0 disables gathering of queue related data. Configuration Variable… |
| 1.3.6.1.4.1.597.4.3.5.33 | ScalarsCfgDskMinFreeBlks | read-write | mandatory | The minimum number of disk blocks that must be free on a disk. When the number of free blocks on a disk drops below this level, excessive disk utilization (sDs… |
| 1.3.6.1.4.1.597.4.3.5.34 | ScalarsCfgMemLimit | read-write | mandatory | The percentage of physical memory utilization at which excessive memory utilization (sMemFull) traps begin to be sent. A value of 0 disables these traps. Confi… |
| 1.3.6.1.4.1.597.4.3.5.35 | ScalarsCfgCOMQueueLimit | read-write | mandatory | The number of processes in COM state at which excessive compute queue (sCOMQue) traps begin to be sent. A value of 0 disables these traps. Configuration Variab… |
| 1.3.6.1.4.1.597.4.3.5.36 | ScalarsCfgCOMOQueueLimit | read-write | mandatory | The number of processes in COMO state at which excessive outswapped compute queue (sCOMOQue) traps begin to be sent. A value of 0 disables these traps. Configu… |
| 1.3.6.1.4.1.597.4.3.5.37 | ScalarsCfgOpcomCards | read-write | mandatory | Flag which determines if NM*SysMgr will receive opcom CARDS class messages. Setting this variable to disabled(2) disables NM*SysMgr from receiving CARDS opcom … |
| 1.3.6.1.4.1.597.4.3.5.38 | ScalarsCfgOpcomCentral | read-write | mandatory | Flag which determines if NM*SysMgr will receive opcom CENTRAL class messages. Setting this variable to disabled(2) disables NM*SysMgr from receiving CENTRAL op… |
| 1.3.6.1.4.1.597.4.3.5.39 | ScalarsCfgOpcomCluster | read-write | mandatory | Flag which determines if NM*SysMgr will receive opcom CLUSTERclass messages. Setting this variable to disabled(2) disables NM*SysMgr from receiving CLUSTER opc… |
| 1.3.6.1.4.1.597.4.3.5.40 | ScalarsCfgOpcomDevices | read-write | mandatory | Flag which determines if NM*SysMgr will receive opcom DEVICES class messages. Setting this variable to disabled(2) disables NM*SysMgr from receiving DEVICES op… |
| 1.3.6.1.4.1.597.4.3.5.41 | ScalarsCfgOpcomDisks | read-write | mandatory | Flag which determines if NM*SysMgr will receive opcom DISKS class messages. Setting this variable to disabled(2) disables NM*SysMgr from receiving DISKS opcom … |
| 1.3.6.1.4.1.597.4.3.5.42 | ScalarsCfgOpcomLicense | read-write | mandatory | Flag which determines if NM*SysMgr will receive opcom LICENSE class messages. Setting this variable to disabled(2) disables NM*SysMgr from receiving LICENSE op… |
| 1.3.6.1.4.1.597.4.3.5.43 | ScalarsCfgOpcomNetwork | read-write | mandatory | Flag which determines if NM*SysMgr will receive opcom NETWORK class messages. Setting this variable to disabled(2) disables NM*SysMgr from receiving NETWORK op… |
| 1.3.6.1.4.1.597.4.3.5.44 | ScalarsCfgOpcomOper1 | read-write | mandatory | Flag which determines if NM*SysMgr will receive opcom OPER1 class messages. Setting this variable to disabled(2) disables NM*SysMgr from receiving OPER1 opcom … |
| 1.3.6.1.4.1.597.4.3.5.45 | ScalarsCfgOpcomOper2 | read-write | mandatory | Flag which determines if NM*SysMgr will receive opcom OPER2 class messages. Setting this variable to disabled(2) disables NM*SysMgr from receiving OPER2 opcom … |
| 1.3.6.1.4.1.597.4.3.5.46 | ScalarsCfgOpcomOper3 | read-write | mandatory | Flag which determines if NM*SysMgr will receive opcom OPER3 class messages. Setting this variable to disabled(2) disables NM*SysMgr from receiving OPER3 opcom … |
| 1.3.6.1.4.1.597.4.3.5.47 | ScalarsCfgOpcomOper4 | read-write | mandatory | Flag which determines if NM*SysMgr will receive opcom OPER4 class messages. Setting this variable to disabled(2) disables NM*SysMgr from receiving OPER4 opcom … |
| 1.3.6.1.4.1.597.4.3.5.48 | ScalarsCfgOpcomOper5 | read-write | mandatory | Flag which determines if NM*SysMgr will receive opcom OPER5 class messages. Setting this variable to disabled(2) disables NM*SysMgr from receiving OPER5 opcom … |
| 1.3.6.1.4.1.597.4.3.5.49 | ScalarsCfgOpcomOper6 | read-write | mandatory | Flag which determines if NM*SysMgr will receive opcom OPER6 class messages. Setting this variable to disabled(2) disables NM*SysMgr from receiving OPER6 opcom … |
| 1.3.6.1.4.1.597.4.3.5.50 | ScalarsCfgOpcomOper7 | read-write | mandatory | Flag which determines if NM*SysMgr will receive opcom OPER7 class messages. Setting this variable to disabled(2) disables NM*SysMgr from receiving OPER7 opcom … |
| 1.3.6.1.4.1.597.4.3.5.51 | ScalarsCfgOpcomOper8 | read-write | mandatory | Flag which determines if NM*SysMgr will receive opcom OPER8 class messages. Setting this variable to disabled(2) disables NM*SysMgr from receiving OPER8 opcom … |
| 1.3.6.1.4.1.597.4.3.5.52 | ScalarsCfgOpcomOper9 | read-write | mandatory | Flag which determines if NM*SysMgr will receive opcom OPER9 class messages. Setting this variable to disabled(2) disables NM*SysMgr from receiving OPER9 opcom … |
| 1.3.6.1.4.1.597.4.3.5.53 | ScalarsCfgOpcomOper10 | read-write | mandatory | Flag which determines if NM*SysMgr will receive opcom OPER10 class messages. Setting this variable to disabled(2) disables NM*SysMgr from receiving OPER10 opco… |
| 1.3.6.1.4.1.597.4.3.5.54 | ScalarsCfgOpcomOper11 | read-write | mandatory | Flag which determines if NM*SysMgr will receive opcom OPER11 class messages. Setting this variable to disabled(2) disables NM*SysMgr from receiving OPER11 opco… |
| 1.3.6.1.4.1.597.4.3.5.55 | ScalarsCfgOpcomOper12 | read-write | mandatory | Flag which determines if NM*SysMgr will receive opcom OPER12 class messages. Setting this variable to disabled(2) disables NM*SysMgr from receiving OPER12 opco… |
| 1.3.6.1.4.1.597.4.3.5.56 | ScalarsCfgOpcomPrinter | read-write | mandatory | Flag which determines if NM*SysMgr will receive opcom PRINTER class messages. Setting this variable to disabled(2) disables NM*SysMgr from receiving PRINTER op… |
| 1.3.6.1.4.1.597.4.3.5.57 | ScalarsCfgOpcomTapes | read-write | mandatory | Flag which determines if NM*SysMgr will receive opcom TAPES class messages. Setting this variable to disabled(2) disables NM*SysMgr from receiving TAPES opcom … |
| 1.3.6.1.4.1.597.4.3.5.58 | ScalarsCfgOpcomFilter | read-write | mandatory | Flag which determines if NM*SysMgr will drop opcom messages that match filter criteria or drop all opcom messages except those that match filter criteria. Conf… |
| 1.3.6.1.4.1.597.4.3.5.59 | ScalarsCfgLocalDisksOnly | read-write | mandatory | Flag which may be used to instruct NM*SysMgr to gather disk statistics either on all available disks or only on local disks. A disk is considered to be local i… |
| 1.3.6.1.4.1.597.4.3.5.60 | ScalarsCfgCritDisksOnly | read-write | mandatory | Flag which may be used to instruct NM*SysMgr to gather disk statistics either on all available disks or only on disks listed in the Critical Disk file (COMTEK$… |
| 1.3.6.1.4.1.597.4.15 | NodecomtekVmsNMVmsMonMib | |||
| 1.3.6.1.4.1.597.4.15.1 | NodevmsModes | |||
| 1.3.6.1.4.1.597.4.15.1.1 | ScalarvmsModeUpdateTime | read-only | mandatory | Time when CPU mode statistics were last gathered. |
| 1.3.6.1.4.1.597.4.15.1.2 | ScalarvmsModeUpdateInterval | read-write | mandatory | How often CPU mode statistics are to be gathered. A value of 0 disables gathering of CPU mode statistics. This value is expressed in minutes. |
| 1.3.6.1.4.1.597.4.15.1.3 | ScalarvmsModeCpuCount | read-only | mandatory | Number of entries in the CPU Mode table (i.e., the number of CPUs being monitored). |
| 1.3.6.1.4.1.597.4.15.1.4 | TablevmsModeTable | not-accessible | mandatory | Table description. |
| 1.3.6.1.4.1.597.4.15.1.4.1 | RowvmsModeTableEntry | not-accessible | mandatory | Row in table description. |
| 1.3.6.1.4.1.597.4.15.1.4.1.1 | ColumnvmsModeCpuId | read-only | mandatory | CPU ID for mode data in this row in the mode table. |
| 1.3.6.1.4.1.597.4.15.1.4.1.2 | ColumnvmsModeKernel | read-only | mandatory | Number of clock ticks this CPU has spent in kernel mode (excluding interrupt stack time) since the system was booted. |
| 1.3.6.1.4.1.597.4.15.1.4.1.3 | ColumnvmsModeExec | read-only | mandatory | Number of clock ticks this CPU has spent in Executive mode since the system was booted. |
| 1.3.6.1.4.1.597.4.15.1.4.1.4 | ColumnvmsModeSuper | read-only | mandatory | Number of clock ticks this CPU has spent in Supervisor mode since the system was booted. |
| 1.3.6.1.4.1.597.4.15.1.4.1.5 | ColumnvmsModeUser | read-only | mandatory | Number of clock ticks this CPU has spent in User mode (excluding compatibility-mode time) since the system was booted. |
| 1.3.6.1.4.1.597.4.15.1.4.1.6 | ColumnvmsModeInter | read-only | mandatory | Number of clock ticks (10-millisecond units) this CPU has spent on the Interrupt stack since the system was booted. |
| 1.3.6.1.4.1.597.4.15.1.4.1.7 | ColumnvmsModeMPSync | read-only | mandatory | Number of clock ticks this CPU has spent synchronizing multiple CPUs since the system was booted. |
| 1.3.6.1.4.1.597.4.15.1.4.1.8 | ColumnvmsModeCompat | read-only | mandatory | Number of clock ticks this CPU has spent in Compatibility mode since the system was booted. |
| 1.3.6.1.4.1.597.4.15.1.4.1.9 | ColumnvmsModeIdle | read-only | mandatory | Number of clock ticks this CPU has spent executing the NULL process since the system was booted. |
| 1.3.6.1.4.1.597.4.15.1.5 | NodevmsTotalModes | |||
| 1.3.6.1.4.1.597.4.15.1.5.1 | ScalarvmsTotalKernel | read-only | mandatory | Total number of clock ticks all CPUs have spent in kernel mode (excluding interrupt stack time) since the system was booted. |
| 1.3.6.1.4.1.597.4.15.1.5.2 | ScalarvmsTotalExec | read-only | mandatory | Total clock ticks all CPUs have spent in Executive mode since the system was booted. |
| 1.3.6.1.4.1.597.4.15.1.5.3 | ScalarvmsTotalSuper | read-only | mandatory | Total clock ticks all CPUs have spent in Supervisor mode since the system was booted. |
| 1.3.6.1.4.1.597.4.15.1.5.4 | ScalarvmsTotalUser | read-only | mandatory | Total clock ticks all CPUs have spent in User mode (excluding compatibility-mode time) since the system was booted. |
| 1.3.6.1.4.1.597.4.15.1.5.5 | ScalarvmsTotalInter | read-only | mandatory | Total clock ticks (10-millisecond units) all CPUs have spent on the Interrupt stack since the system was booted. |
| 1.3.6.1.4.1.597.4.15.1.5.6 | ScalarvmsTotalMPSync | read-only | mandatory | Total clock ticks all CPUs have spent synchronizing multiple CPUs since the system was booted. |
| 1.3.6.1.4.1.597.4.15.1.5.7 | ScalarvmsTotalComp | read-only | mandatory | Total clock ticks all CPUs have spent in Compatibility mode since the system was booted. |
| 1.3.6.1.4.1.597.4.15.1.5.8 | ScalarvmsTotalIdle | read-only | mandatory | Total clock ticks all CPUs have spent executing the NULL process since the system was booted. |
| 1.3.6.1.4.1.597.4.15.2 | NodevmsFile | |||
| 1.3.6.1.4.1.597.4.15.2.1 | ScalarvmsFileUpdateTime | read-only | mandatory | Time when File System statistics were last updated. |
| 1.3.6.1.4.1.597.4.15.2.2 | ScalarvmsFileUpdateInterval | read-write | mandatory | How often File System statistics are to be gathered. A value of 0 disables gathering of File System statistics. This value is expressed in minutes. |
| 1.3.6.1.4.1.597.4.15.2.3 | ScalarvmsFileDirFCBHit | read-only | mandatory | Count of hits on directory FCB cache. |
| 1.3.6.1.4.1.597.4.15.2.4 | ScalarvmsFileDirFCBAttempt | read-only | mandatory | Count of attempts on directory FCB cache. |
| 1.3.6.1.4.1.597.4.15.2.5 | ScalarvmsFileDirDataHit | read-only | mandatory | Count of hits on directory data cache. |
| 1.3.6.1.4.1.597.4.15.2.6 | ScalarvmsFileDirDataAttempt | read-only | mandatory | Count of attempts on directory data cache. |
| 1.3.6.1.4.1.597.4.15.2.7 | ScalarvmsFileFileHdrHit | read-only | mandatory | Count of hits on file header cache. |
| 1.3.6.1.4.1.597.4.15.2.8 | ScalarvmsFileFileHdrAttempt | read-only | mandatory | Count of attempts on file header cache. |
| 1.3.6.1.4.1.597.4.15.2.9 | ScalarvmsFileFileIdHit | read-only | mandatory | Count of hits on file ID cache. |
| 1.3.6.1.4.1.597.4.15.2.10 | ScalarvmsFileFileIdAttempt | read-only | mandatory | Count of attempts on file ID cache. |
| 1.3.6.1.4.1.597.4.15.2.11 | ScalarvmsFileExtentHit | read-only | mandatory | Count of hits on extent cache. |
| 1.3.6.1.4.1.597.4.15.2.12 | ScalarvmsFileExtentAttempt | read-only | mandatory | Count of attempts on extent cache. |
| 1.3.6.1.4.1.597.4.15.2.13 | ScalarvmsFileQuotaHit | read-only | mandatory | Count of hits on quota cache. |
| 1.3.6.1.4.1.597.4.15.2.14 | ScalarvmsFileQuotaAttempt | read-only | mandatory | Count of attempts on quota cache. |
| 1.3.6.1.4.1.597.4.15.2.15 | ScalarvmsFileBitmapHit | read-only | mandatory | Count of hits on storage bitmap cache. |
| 1.3.6.1.4.1.597.4.15.2.16 | ScalarvmsFileBitmapAttempt | read-only | mandatory | Count of attempts on storage bitmap cache. |
| 1.3.6.1.4.1.597.4.15.3 | NodevmsFcp | |||
| 1.3.6.1.4.1.597.4.15.3.1 | ScalarvmsFcpUpdateTime | read-only | mandatory | Time when FCP statistics were last updated. |
| 1.3.6.1.4.1.597.4.15.3.2 | ScalarvmsFcpUpdateInterval | read-write | mandatory | How often FCP statistics are to be gathered. A value of 0 disables gathering of File System statistics. This value is expressed in minutes. |
| 1.3.6.1.4.1.597.4.15.3.3 | ScalarvmsFcpFCPCall | read-only | mandatory | Count of QIO requests received by the file system. |
| 1.3.6.1.4.1.597.4.15.3.4 | ScalarvmsFcpAllocation | read-only | mandatory | Count of QIO requests that caused allocation of disk space. |
| 1.3.6.1.4.1.597.4.15.3.5 | ScalarvmsFcpCreate | read-only | mandatory | Count of new files created. |
| 1.3.6.1.4.1.597.4.15.3.6 | ScalarvmsFcpDiskRead | read-only | mandatory | Count of read I/O operations from the disk by the file system. |
| 1.3.6.1.4.1.597.4.15.3.7 | ScalarvmsFcpDiskWrite | read-only | mandatory | Count of write I/O operations to the disk by the file system. |
| 1.3.6.1.4.1.597.4.15.3.8 | ScalarvmsFcpVolumeLockWait | read-only | mandatory | Number of times a wait state was entered by the XQP due to volume lock contention. |
| 1.3.6.1.4.1.597.4.15.3.9 | ScalarvmsFcpCPUTick | read-only | mandatory | Count of clock ticks (10-millisecond units) of CPU time used by the file system. |
| 1.3.6.1.4.1.597.4.15.3.10 | ScalarvmsFcpPageFault | read-only | mandatory | Count of page faults for the file system. |
| 1.3.6.1.4.1.597.4.15.3.11 | ScalarvmsFcpWindowTurn | read-only | mandatory | Count of file-map window misses. |
| 1.3.6.1.4.1.597.4.15.3.12 | ScalarvmsFcpLookup | read-only | mandatory | Count of file name lookup operations in file directories. |
| 1.3.6.1.4.1.597.4.15.3.13 | ScalarvmsFcpOpen | read-only | mandatory | Count of files opened. |
| 1.3.6.1.4.1.597.4.15.3.14 | ScalarvmsFcpErase | read-only | mandatory | Count of erase I/O operations issued. |
| 1.3.6.1.4.1.597.4.15.4 | NodevmsIo | |||
| 1.3.6.1.4.1.597.4.15.4.1 | ScalarvmsIoUpdateTime | read-only | mandatory | Time when I/O statistics were last updated. |
| 1.3.6.1.4.1.597.4.15.4.2 | ScalarvmsIoUpdateInterval | read-write | mandatory | How often I/O statistics are to be gathered. A value of 0 disables gathering of I/O statistics. This value is expressed in minutes. |
| 1.3.6.1.4.1.597.4.15.4.3 | ScalarvmsIoDirectIO | read-only | mandatory | Count of direct I/O operations. |
| 1.3.6.1.4.1.597.4.15.4.4 | ScalarvmsIoBufferedIO | read-only | mandatory | Count of buffered I/O operations. |
| 1.3.6.1.4.1.597.4.15.4.5 | ScalarvmsIoMailboxWrite | read-only | mandatory | Count of write-to-mailbox requests. |
| 1.3.6.1.4.1.597.4.15.4.6 | ScalarvmsIoSplitTransfer | read-only | mandatory | Count of split transfers. |
| 1.3.6.1.4.1.597.4.15.4.7 | ScalarvmsIoLogNameTranslation | read-only | mandatory | Count of logical name translations. |
| 1.3.6.1.4.1.597.4.15.4.8 | ScalarvmsIoFileOpen | read-only | mandatory | Count of files opened . |
| 1.3.6.1.4.1.597.4.15.4.9 | ScalarvmsIoPageFault | read-only | mandatory | Count of page faults for all working sets . |
| 1.3.6.1.4.1.597.4.15.4.10 | ScalarvmsIoPageRead | read-only | mandatory | Count of pages read from disk as a result of page faults. |
| 1.3.6.1.4.1.597.4.15.4.11 | ScalarvmsIoPageReadIO | read-only | mandatory | Count of read I/O operations from disk as a result of page faults. |
| 1.3.6.1.4.1.597.4.15.4.12 | ScalarvmsIoPageWrite | read-only | mandatory | Count of pages written to the page file. |
| 1.3.6.1.4.1.597.4.15.4.13 | ScalarvmsIoPageWriteIO | read-only | mandatory | Count of write I/O operations to the page file. |
| 1.3.6.1.4.1.597.4.15.4.14 | ScalarvmsIoInswap | read-only | mandatory | Count of working sets read into memory from the swap file. |
| 1.3.6.1.4.1.597.4.15.4.15 | ScalarvmsIoFreePageCount | read-only | mandatory | Number of pages currently on free-page list. |
| 1.3.6.1.4.1.597.4.15.4.16 | ScalarvmsIoModifiedPageCount | read-only | mandatory | Number of pages currently on modified-page list. |
| 1.3.6.1.4.1.597.4.15.5 | NodevmsPage | |||
| 1.3.6.1.4.1.597.4.15.5.1 | ScalarvmsPageUpdateTime | read-only | mandatory | Time when page statistics were last updated. |
| 1.3.6.1.4.1.597.4.15.5.2 | ScalarvmsPageUpdateInterval | read-write | mandatory | How often Page statistics are to be gathered. A value of 0 disables gathering of Page statistics. This value is expressed in minutes. |
| 1.3.6.1.4.1.597.4.15.5.3 | ScalarvmsPageFault | read-only | mandatory | Count of page faults for all working sets. |
| 1.3.6.1.4.1.597.4.15.5.4 | ScalarvmsPageRead | read-only | mandatory | Count of pages read from disk as a result of page faults. |
| 1.3.6.1.4.1.597.4.15.5.5 | ScalarvmsPageReadIO | read-only | mandatory | Count of read I/Os as a result of operations from disk page faults. |
| 1.3.6.1.4.1.597.4.15.5.6 | ScalarvmsPageWrite | read-only | mandatory | Count of pages written to the page file. |
| 1.3.6.1.4.1.597.4.15.5.7 | ScalarvmsPageWriteIO | read-only | mandatory | Count of write I/O operations to the page file. |
| 1.3.6.1.4.1.597.4.15.5.8 | ScalarvmsPageFreeListFault | read-only | mandatory | Count of pages read from the free list as a result of page faults. |
| 1.3.6.1.4.1.597.4.15.5.9 | ScalarvmsPageModListFault | read-only | mandatory | Count of pages read from the modified list as a result of page faults. |
| 1.3.6.1.4.1.597.4.15.5.10 | ScalarvmsPageDemandZeroFault | read-only | mandatory | Count of zero-filled pages allocated as a result of faults. |
| 1.3.6.1.4.1.597.4.15.5.11 | ScalarvmsPageGlobalValidFault | read-only | mandatory | Count of page faults for which the reference page was found to be valid in the system global page tables. |
| 1.3.6.1.4.1.597.4.15.5.12 | ScalarvmsPageWrtInProgressFault | read-only | mandatory | Count of pages read that were in the process of being written back to disk when faulted. |
| 1.3.6.1.4.1.597.4.15.5.13 | ScalarvmsPageSystemFault | read-only | mandatory | Count of page faults for which the referenced page is in system space. |
| 1.3.6.1.4.1.597.4.15.5.14 | ScalarvmsPageFreePageCount | read-only | mandatory | Number of pages currently on free-page list. |
| 1.3.6.1.4.1.597.4.15.5.15 | ScalarvmsPageModifiedPageCount | read-only | mandatory | Number of pages currently on modified-page. |
| 1.3.6.1.4.1.597.4.15.6 | NodevmsDecnet | |||
| 1.3.6.1.4.1.597.4.15.6.1 | ScalarvmsDecnetUpdateTime | read-only | mandatory | Time when DECnet statistics were last gathered. |
| 1.3.6.1.4.1.597.4.15.6.2 | ScalarvmsDecnetUpdateInterval | read-write | mandatory | How often DECnet statistics are to be gathered. A value of 0 disables gathering of DECnet statistics. This value is expressed in minutes. |
| 1.3.6.1.4.1.597.4.15.6.3 | ScalarvmsDecnetArriveLocalPkt | read-only | mandatory | Count of arriving local packets. |
| 1.3.6.1.4.1.597.4.15.6.4 | ScalarvmsDecnetDepartLocalPkt | read-only | mandatory | Count of departing local packets. |
| 1.3.6.1.4.1.597.4.15.6.5 | ScalarvmsDecnetArriveTransPkt | read-only | mandatory | Count of arriving transit packets. |
| 1.3.6.1.4.1.597.4.15.6.6 | ScalarvmsDecnetTransCongestLoss | read-only | mandatory | Count of packets lost because of transit congestion. |
| 1.3.6.1.4.1.597.4.15.6.7 | ScalarvmsDecnetReceiveBufFail | read-only | mandatory | Count of receiver buffer failures . |
| 1.3.6.1.4.1.597.4.15.7 | NodevmsStates | |||
| 1.3.6.1.4.1.597.4.15.7.1 | ScalarvmsStatesUpdateTime | read-only | mandatory | Time when Process State data was last updated. |
| 1.3.6.1.4.1.597.4.15.7.2 | ScalarvmsStatesUpdateInterval | read-write | mandatory | How often Process State data are to be gathered. A value of 0 disables gathering of Process State statistics. This value is expressed in minutes. |
| 1.3.6.1.4.1.597.4.15.7.3 | ScalarvmsStatesCOLPG | read-only | mandatory | Number of processes in Collided Page Wait State (COLPG). |
| 1.3.6.1.4.1.597.4.15.7.4 | ScalarvmsStatesMWAIT | read-only | mandatory | Number of processes in Miscellaneous Resource Wait State (MWAIT). |
| 1.3.6.1.4.1.597.4.15.7.5 | ScalarvmsStatesCEF | read-only | mandatory | Number of processes in Common Event Flag Wait State (CEF). |
| 1.3.6.1.4.1.597.4.15.7.6 | ScalarvmsStatesPFW | read-only | mandatory | Number of processes in Page Fault Wait State (PFW). |
| 1.3.6.1.4.1.597.4.15.7.7 | ScalarvmsStatesLEF | read-only | mandatory | Number of processes in Local Event Flag Wait State (LEF). |
| 1.3.6.1.4.1.597.4.15.7.8 | ScalarvmsStatesLEFO | read-only | mandatory | Number of Outswapped processes in Local Event Flag Wait State (LEFO). |
| 1.3.6.1.4.1.597.4.15.7.9 | ScalarvmsStatesHIB | read-only | mandatory | Number of processes in Hibernate State (HIB). |
| 1.3.6.1.4.1.597.4.15.7.10 | ScalarvmsStatesHIBO | read-only | mandatory | Number of Outswapped processes in Hibernate State (HIBO). |
| 1.3.6.1.4.1.597.4.15.7.11 | ScalarvmsStatesSUSP | read-only | mandatory | Number of processes in Suspended State (SUSP). |
| 1.3.6.1.4.1.597.4.15.7.12 | ScalarvmsStatesSUSPO | read-only | mandatory | Number of Outswapped processes in Suspended State (SUSPO). |
| 1.3.6.1.4.1.597.4.15.7.13 | ScalarvmsStatesFPG | read-only | mandatory | Number of processes in Free Page Wait State (FPG). |
| 1.3.6.1.4.1.597.4.15.7.14 | ScalarvmsStatesCOM | read-only | mandatory | Number of processes in Compute State (COM). |
| 1.3.6.1.4.1.597.4.15.7.15 | ScalarvmsStatesCOMO | read-only | mandatory | Number of Outswapped processes in Compute State (COMO). |
| 1.3.6.1.4.1.597.4.15.7.16 | ScalarvmsStatesCUR | read-only | mandatory | Number of current processes (CUR). |
| 1.3.6.1.4.1.597.4.15.8 | NodevmsCluster | |||
| 1.3.6.1.4.1.597.4.15.8.1 | ScalarvmsClusterUpdateTime | read-only | mandatory | Time when cluster statistics were last updated. |
| 1.3.6.1.4.1.597.4.15.8.2 | ScalarvmsClusterUpdateInterval | read-write | mandatory | How often cluster statistics are to be gathered. A value of 0 disables gathering of cluster statistics. This value is expressed in minutes. |
| 1.3.6.1.4.1.597.4.15.8.3 | ScalarvmsClusterCpuBusy | read-only | mandatory | Count of clock ticks (10-millisecond units) spent in all CPU modes since system was booted. |
| 1.3.6.1.4.1.597.4.15.8.4 | ScalarvmsClusterFreeListSize | read-only | mandatory | Number of pages currently on the free list. |
| 1.3.6.1.4.1.597.4.15.8.5 | ScalarvmsClusterTotalLocks | read-only | mandatory | Total of all incoming, outgoing, and local ENQs, DEQs, and conversions. |
| 1.3.6.1.4.1.597.4.15.8.6 | ScalarvmsClusterNewEnqLocal | read-only | mandatory | Count of new lock requests that originate and are performed on the system. |
| 1.3.6.1.4.1.597.4.15.8.7 | ScalarvmsClusterNewEnqIncoming | read-only | mandatory | Count of new lock requests that originate on other systems and are performed on this system (incoming). |
| 1.3.6.1.4.1.597.4.15.8.8 | ScalarvmsClusterNewEnqOutgoing | read-only | mandatory | Count of new lock requests that originate on this system and are performed on other systems (outgoing). |
| 1.3.6.1.4.1.597.4.15.8.9 | ScalarvmsClusterEnqConversionsLocal | read-only | mandatory | Count of lock conversion requests (local). |
| 1.3.6.1.4.1.597.4.15.8.10 | ScalarvmsClusterEnqConversionsIncoming | read-only | mandatory | Count of lock conversion requests (incoming). |
| 1.3.6.1.4.1.597.4.15.8.11 | ScalarvmsClusterEnqConversionsOutgoing | read-only | mandatory | Count of lock conversion requests (outgoing). |
| 1.3.6.1.4.1.597.4.15.8.12 | ScalarvmsClusterDeqLocal | read-only | mandatory | Count of unlock requests (local). |
| 1.3.6.1.4.1.597.4.15.8.13 | ScalarvmsClusterDeqIncoming | read-only | mandatory | Count of unlock requests (incoming). |
| 1.3.6.1.4.1.597.4.15.8.14 | ScalarvmsClusterDeqOutgoing | read-only | mandatory | Count of unlock requests (outgoing). |
| 1.3.6.1.4.1.597.4.15.9 | NodevmsMscp | |||
| 1.3.6.1.4.1.597.4.15.9.1 | ScalarvmsMscpUpdateTime | read-only | mandatory | Time when MSCP Server statistics were last updated. |
| 1.3.6.1.4.1.597.4.15.9.2 | ScalarvmsMscpUpdateInterval | read-write | mandatory | How often MSCP Server statistics are to be gathered. A value of 0 disables gathering of mscp statistics. This value is expressed in minutes. |
| 1.3.6.1.4.1.597.4.15.9.3 | ScalarvmsMscpRequests | read-only | mandatory | Count of requests for I/O transfers by remote processors. |
| 1.3.6.1.4.1.597.4.15.9.4 | ScalarvmsMscpReads | read-only | mandatory | Count of requests for Read I/O transfers by remote processors. |
| 1.3.6.1.4.1.597.4.15.9.5 | ScalarvmsMscpWrites | read-only | mandatory | Count of requests for Write I/O transfers by remote processors. |
| 1.3.6.1.4.1.597.4.15.9.6 | ScalarvmsMscpFragments | read-only | mandatory | Count of extra fragments issued by the server. |
| 1.3.6.1.4.1.597.4.15.9.7 | ScalarvmsMscpSplits | read-only | mandatory | Count of fragmented requests issued by the server. |
| 1.3.6.1.4.1.597.4.15.9.8 | ScalarvmsMscpBufferWaits | read-only | mandatory | Count of requests that had to wait for MSCP buffer memory. |
| 1.3.6.1.4.1.597.4.15.9.9 | ScalarvmsMscp1BlockIOs | read-only | mandatory | Count of I/O requests with a length of one block. |
| 1.3.6.1.4.1.597.4.15.9.10 | ScalarvmsMscp2-3BlockIOs | read-only | mandatory | Count of I/O requests with a length of 2 to 3 blocks. |
| 1.3.6.1.4.1.597.4.15.9.11 | ScalarvmsMscp4-7BlockIOs | read-only | mandatory | Count of I/O requests with a length of 4 to 7 blocks. |
| 1.3.6.1.4.1.597.4.15.9.12 | ScalarvmsMscp8-15BlockIOs | read-only | mandatory | Count of I/O requests with a length of 8 to 15 blocks. |
| 1.3.6.1.4.1.597.4.15.9.13 | ScalarvmsMscp16-31BlockIOs | read-only | mandatory | Count of I/O requests with a length of 16 to 31 blocks. |
| 1.3.6.1.4.1.597.4.15.9.14 | ScalarvmsMscp32-63BlockIOs | read-only | mandatory | Count of I/O requests with a length of 32 to 63 blocks. |
| 1.3.6.1.4.1.597.4.15.9.15 | ScalarvmsMscp64andOverBlockIOs | read-only | mandatory | Count of I/O requests with a length equal to or greater than 64 blocks. |
| 1.3.6.1.4.1.597.4.15.10 | NodevmsLock | |||
| 1.3.6.1.4.1.597.4.15.10.1 | ScalarvmsLockUpdateTime | read-only | mandatory | Time when Lock statistics were last updated. |
| 1.3.6.1.4.1.597.4.15.10.2 | ScalarvmsLockUpdateInterval | read-write | mandatory | How often Lock statistics are to be gathered. A value of 0 disables gathering of lock statistics. This value is expressed in minutes. |
| 1.3.6.1.4.1.597.4.15.10.3 | ScalarvmsLockNewEnqs | read-only | mandatory | Count of new ENQ (lock) requests. |
| 1.3.6.1.4.1.597.4.15.10.4 | ScalarvmsLockConvertedEnqs | read-only | mandatory | Count of converted ENQ (lock) requests. |
| 1.3.6.1.4.1.597.4.15.10.5 | ScalarvmsLockDeqs | read-only | mandatory | Count of DEQ (unlock) requests. |
| 1.3.6.1.4.1.597.4.15.10.6 | ScalarvmsLockBlockingASTs | read-only | mandatory | Count of blocking ASTs queued. |
| 1.3.6.1.4.1.597.4.15.10.7 | ScalarvmsLockEnqWaits | read-only | mandatory | Count of times a lock could not be granted immediately and waited. |
| 1.3.6.1.4.1.597.4.15.10.8 | ScalarvmsLockEnqsNotQueued | read-only | mandatory | Count of times a lock could not be granted immediately and got an error status instead of waiting. |
| 1.3.6.1.4.1.597.4.15.10.9 | ScalarvmsLockDeadlockSearches | read-only | mandatory | Count of times that a deadlock search was performed. |
| 1.3.6.1.4.1.597.4.15.10.10 | ScalarvmsLockDeadlocksFound | read-only | mandatory | Count of times that a deadlock was found. |
| 1.3.6.1.4.1.597.4.15.10.11 | ScalarvmsLockCurrentLocks | read-only | mandatory | Number of locks currently in the system. |
| 1.3.6.1.4.1.597.4.15.10.12 | ScalarvmsLockCurrentResources | read-only | mandatory | Number of resources currently in the system. |
| 1.3.6.1.4.1.597.4.15.11 | NodevmsDlock | |||
| 1.3.6.1.4.1.597.4.15.11.1 | ScalarvmsDlockUpdateTime | read-only | mandatory | Time when Distributed Lock statistics were last updated. |
| 1.3.6.1.4.1.597.4.15.11.2 | ScalarvmsDlockUpdateInterval | read-write | mandatory | How often Lock statistics are to be gathered. A value of 0 disables gathering of dlock statistics. This value is expressed in minutes. |
| 1.3.6.1.4.1.597.4.15.11.3 | ScalarvmsDlockNewLocksLocal | read-only | mandatory | Count of new lock requests that originate and are performed on this system (local). |
| 1.3.6.1.4.1.597.4.15.11.4 | ScalarvmsDlockNewLocksIncoming | read-only | mandatory | Count of new lock requests originating on another system and performed on this system (incoming). |
| 1.3.6.1.4.1.597.4.15.11.5 | ScalarvmsDlockNewLocksOutgoing | read-only | mandatory | Count of new lock requests originating on this system and performed on another system (outgoing). |
| 1.3.6.1.4.1.597.4.15.11.6 | ScalarvmsDlockLockConversionsLocal | read-only | mandatory | Count of lock conversion requests (local). |
| 1.3.6.1.4.1.597.4.15.11.7 | ScalarvmsDlockLockConversionsIncoming | read-only | mandatory | Count of lock conversion requests (incoming). |
| 1.3.6.1.4.1.597.4.15.11.8 | ScalarvmsDlockLockConversionsOutgoing | read-only | mandatory | Count of lock conversion requests (outgoing). |
| 1.3.6.1.4.1.597.4.15.11.9 | ScalarvmsDlockUnlocksLocal | read-only | mandatory | Count of unlock requests (local). |
| 1.3.6.1.4.1.597.4.15.11.10 | ScalarvmsDlockUnlocksIncoming | read-only | mandatory | Count of unlock requests (incoming). |
| 1.3.6.1.4.1.597.4.15.11.11 | ScalarvmsDlockUnlocksOutgoing | read-only | mandatory | Count of unlock requests (outgoing). |
| 1.3.6.1.4.1.597.4.15.11.12 | ScalarvmsDlockBlockingASTsLocal | read-only | mandatory | Count of lock manager blocking ASTs (local). |
| 1.3.6.1.4.1.597.4.15.11.13 | ScalarvmsDlockBlockingASTsIncoming | read-only | mandatory | Count of lock manager blocking ASTs (incoming). |
| 1.3.6.1.4.1.597.4.15.11.14 | ScalarvmsDlockBlockingASTsOutgoing | read-only | mandatory | Count of lock manager blocking ASTs (outgoing). |
| 1.3.6.1.4.1.597.4.15.11.15 | ScalarvmsDlockDirFuncIncoming | read-only | mandatory | Count of directory functions (incoming). |
| 1.3.6.1.4.1.597.4.15.11.16 | ScalarvmsDlockDirFuncOutgoing | read-only | mandatory | Count of directory functions (outgoing). |
| 1.3.6.1.4.1.597.4.15.11.17 | ScalarvmsDlockDeadlockMessage | read-only | mandatory | Count of incoming and outgoing lock manager messages required for deadlock detection. |
| 1.3.6.1.4.1.597.4.15.12 | NodevmsSystem | |||
| 1.3.6.1.4.1.597.4.15.12.1 | ScalarvmsSystemUpdateTime | read-only | mandatory | Time when system statistics were last updated. |
| 1.3.6.1.4.1.597.4.15.12.2 | ScalarvmsSystemUpdateInterval | read-write | mandatory | How often system statistics are to be gathered. A value of 0 disables gathering of system statistics. This value is expressed in minutes. |
| 1.3.6.1.4.1.597.4.15.12.3 | ScalarvmsSystemCpuBusy | read-only | mandatory | Count of clock ticks (10-millisecond units) spent in all CPU modes since system was booted. |
| 1.3.6.1.4.1.597.4.15.12.4 | ScalarvmsSystemOtherStates | read-only | mandatory | Number of processes in states other than LEF, LEFO, HIB, HIBO, COM, COMO, PFW, and MWAIT. |
| 1.3.6.1.4.1.597.4.15.12.5 | ScalarvmsSystemProcessCount | read-only | mandatory | Number of processes in the system. |
| 1.3.6.1.4.1.597.4.15.12.6 | ScalarvmsSystemPageFaults | read-only | mandatory | Count of page faults for all working sets. |
| 1.3.6.1.4.1.597.4.15.12.7 | ScalarvmsSystemReadIOs | read-only | mandatory | Count of read I/Os resulting from disk page faults. |
| 1.3.6.1.4.1.597.4.15.12.8 | ScalarvmsSystemFreePageCount | read-only | mandatory | Number of pages currently on free-page list. |
| 1.3.6.1.4.1.597.4.15.12.9 | ScalarvmsSystemModifiedPageCount | read-only | mandatory | Number of pages currently on modified-page list. |
| 1.3.6.1.4.1.597.4.15.12.10 | ScalarvmsSystemDirectIOs | read-only | mandatory | Count of direct I/O operations. |
| 1.3.6.1.4.1.597.4.15.12.11 | ScalarvmsSystemBufferedIOs | read-only | mandatory | Count of buffered I/O operations. |