COPPER-MOUNTAIN-NETWORKS-DSL-MIB
758 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises Gauge IpAddress TimeTicks |
| RFC1213-MIB | DisplayString ifIndex |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1996 | Nodecoppermountain | |||
| 1.3.6.1.4.1.1996.1 | NodecmLoginError | Indicates an operator tried and failed to log into the system. If this trap has a severity of 'information,' it can potentially clear an alarm in the system. W… | ||
| 1.3.6.1.4.1.1996.1 | NodecmRegistry | |||
| 1.3.6.1.4.1.1996.1.1 | NodecmCE120Platform | |||
| 1.3.6.1.4.1.1996.1.2 | NodecmCE150Platform | |||
| 1.3.6.1.4.1.1996.1.3 | NodecmCE200Platform | |||
| 1.3.6.1.4.1.1996.2 | NodecmLoginOK | This trap indicates that an operator has successfully logged into the system. If this trap has a severity of 'information,' it can potentially clear an alarm i… | ||
| 1.3.6.1.4.1.1996.3 | NodecmLogout | Indicates that an operator has successfully logged out of the system. | ||
| 1.3.6.1.4.1.1996.4 | NodecmLoginsSaturated | Indicates that the maximum number of operators are currently logged into the system. No more logins will be allowed until one of them logs out. | ||
| 1.3.6.1.4.1.1996.5 | NodecmLoginsAvailable | Inidicates that logins are allowed again. If this trap has a severity of 'information,' it can potentially clear an alarm in the system. When such a trap is re… | ||
| 1.3.6.1.4.1.1996.6 | NodecmBoardUp | This trap indicates that the indicated system board has established communication with the System Control Module. If this trap has a severity of 'information,'… | ||
| 1.3.6.1.4.1.1996.7 | NodecmBoardDown | This trap indicates that the indicated system board has stopped communicating with the System Control Module. | ||
| 1.3.6.1.4.1.1996.8 | NodecmLoginsSuspended | Inidcates that logins are temporarily suspended for the given operator name because of 3 successive failed login attempts. | ||
| 1.3.6.1.4.1.1996.9 | NodecmLoginsAllowed | Indicates that logins are now allowed for this user name. If this trap has a severity of 'information,' it can potentially clear an alarm in the system. When s… | ||
| 1.3.6.1.4.1.1996.10 | NodecmBootFileError | Indicates that the given board did not successfully boot. The reason for this failure can be determined from the cmTrapEventLogProbableCause object. This condi… | ||
| 1.3.6.1.4.1.1996.10 | NodecmTransmission | |||
| 1.3.6.1.4.1.1996.10.3 | NodecmHDSL | |||
| 1.3.6.1.4.1.1996.10.3.1 | TablecmHDSLModemTable | not-accessible | mandatory | The DSL Port Information table for Configuration and Management of DSL ports. |
| 1.3.6.1.4.1.1996.10.3.1.1 | RowcmHDSLModemEntry | not-accessible | mandatory | An entry in the DSL Port Information table. |
| 1.3.6.1.4.1.1996.10.3.1.1.1 | ColumncmHDSLModemIndex | read-only | mandatory | The value of this object indicates the combination of shelf, port and slot number (i.e ifIndex). |
| 1.3.6.1.4.1.1996.10.3.1.1.2 | ColumncmHDSLModemType | read-only | mandatory | The value of this object specifies the bit pump type. |
| 1.3.6.1.4.1.1996.10.3.1.1.3 | ColumncmHDSLModemTxGain | read-only | mandatory | The value of this object specifies the transmit gain. |
| 1.3.6.1.4.1.1996.10.3.1.1.4 | ColumncmHDSLModemTestMode | read-only | mandatory | The value of this Object is the test mode in operation. Please note that in future SW releases this attributes shall only be accessible to diagnostic engineers. |
| 1.3.6.1.4.1.1996.10.3.1.1.5 | ColumncmHDSLModemNoiseMargin | read-only | mandatory | The value of this object specifies the noise margin of the receiver. |
| 1.3.6.1.4.1.1996.10.3.1.1.7 | ColumncmHDSLModemBPSwMajorVersion | read-only | mandatory | The value of this Object is the major Sw Version Number. |
| 1.3.6.1.4.1.1996.10.3.1.1.8 | ColumncmHDSLModemBPSwMinorVersion | read-only | mandatory | The value of this Object is the minor Sw Version Number. |
| 1.3.6.1.4.1.1996.10.3.1.1.9 | ColumncmHDSLModemBPHwVersion | read-only | mandatory | The value of this Object is the Hw Version Number. |
| 1.3.6.1.4.1.1996.10.3.1.1.14 | ColumncmHDSLModemDataRate | read-write | mandatory | This object sets/displays the data rate, in kbps, for this port. |
| 1.3.6.1.4.1.1996.10.3.1.1.15 | ColumncmHDSLModemCpeCode | read-write | mandatory | The value of this object describes certain charateristics that are unique to this CPE. For example line polarity, di-bit ordering, preactiviation signaling, et… |
| 1.3.6.1.4.1.1996.10.3.1.1.16 | ColumncmHDSLModemSuccessfulTrains | read-only | mandatory | The is the number of successful trains for this port. This value is zero at powerup. This value is cleared whenver the operator changes the data rate for the p… |
| 1.3.6.1.4.1.1996.10.3.1.1.17 | ColumncmHDSLModemFailedTrainingAttempts | read-only | mandatory | The is the number of failed training attempts for this port. This value is zero at powerup. This value is cleared whenver the operator changes the data rate fo… |
| 1.3.6.1.4.1.1996.10.3.1.1.18 | ColumncmHDSLModemCpeResponses | read-only | mandatory | The is the number of CPE responses to training sequences that have been seen on this port. The responses may lead to successful trains or not. This value is ze… |
| 1.3.6.1.4.1.1996.10.3.1.1.19 | ColumncmHDSLModemMinRate | read-write | mandatory | The value of this object indicates the minimum rate the fallback mechanism will attempt to train at. MinRate == 'none' disables the feature. MinRate >= cmHDSLM… |
| 1.3.6.1.4.1.1996.10.3.1.1.20 | ColumncmHDSLModemCurrentRate | read-only | mandatory | This field represents either the attempted rate or the actual trained rate, depending upon the training state of the link. |
| 1.3.6.1.4.1.1996.10.3.1.1.21 | ColumncmHDSLModemCommand | read-write | mandatory | This field directs a particular command to the specific link. 'retrain' forces the link to retrain. |
| 1.3.6.1.4.1.1996.10.3.2 | TablecmHDSLPerfIntervalTable | not-accessible | obsolete | Obsoleted 4/6/99. Dsl Port info about Perf Counters |
| 1.3.6.1.4.1.1996.10.3.2.1 | RowcmHDSLPerfIntervalEntry | not-accessible | obsolete | Obsoleted 4/6/99. Dsl Port Performance Monitoring Counters |
| 1.3.6.1.4.1.1996.10.3.2.1.1 | ColumncmHDSLPerfIndex | not-accessible | obsolete | Obsoleted 4/6/99. DSL port (interface) number (i.e ifIndex) |
| 1.3.6.1.4.1.1996.10.3.2.1.2 | ColumncmHDSLPerfIntervalNumber | not-accessible | obsolete | Obsoleted 4/6/99. A value between 1 and 24, where 1 is the most recent hour interval and 24 is the oldest hour interval |
| 1.3.6.1.4.1.1996.10.3.2.1.3 | ColumncmHDSLPerfTxUnderruns | not-accessible | obsolete | Obsoleted 4/6/99. Number of transmit underruns detected. |
| 1.3.6.1.4.1.1996.10.3.2.1.4 | ColumncmHDSLPerfRxTruncated | not-accessible | obsolete | Obsoleted 4/6/99. Number of frames truncated due to receiver overruns. |
| 1.3.6.1.4.1.1996.10.3.2.1.5 | ColumncmHDSLPerfRxBig | not-accessible | obsolete | Obsoleted 4/6/99. Number of receive frames that were discarded because they were too large. |
| 1.3.6.1.4.1.1996.10.3.2.1.6 | ColumncmHDSLPerfRxAborts | not-accessible | obsolete | Obsoleted 4/6/99. Number of aborted frames received. |
| 1.3.6.1.4.1.1996.10.3.2.1.7 | ColumncmHDSLPerfRxAlignmentErrors | not-accessible | obsolete | Obsoleted 4/6/99. Number of unaligned frames received. |
| 1.3.6.1.4.1.1996.10.3.2.1.8 | ColumncmHDSLPerfRxCRCErrors | not-accessible | obsolete | Obsoleted 4/6/99. Number of frames received with CRC errors. |
| 1.3.6.1.4.1.1996.10.3.2.1.9 | ColumncmHDSLPerfRxOverruns | not-accessible | obsolete | Obsoleted 4/6/99. Number of frames discarded because of receiver overruns. |
| 1.3.6.1.4.1.1996.10.3.2.1.10 | ColumncmHDSLPerfRxValidFrames | not-accessible | obsolete | Obsoleted 4/6/99. Number of valid frames received. |
| 1.3.6.1.4.1.1996.10.3.2.1.11 | ColumncmHDSLPerfTxValidFrames | not-accessible | obsolete | Obsoleted 4/6/99. Number of frames transmitted successfully |
| 1.3.6.1.4.1.1996.10.3.2.1.12 | ColumncmHDSLPerfRxNoBuffers | not-accessible | obsolete | Obsoleted 4/6/99. Number of receive frames discarded due to lack of buffers. |
| 1.3.6.1.4.1.1996.10.3.3 | TablecmCpeHDSLModemTable | not-accessible | mandatory | The DSL Port Information table for Configuration and Management of DSL ports. |
| 1.3.6.1.4.1.1996.10.3.3.1 | RowcmCpeHDSLModemEntry | not-accessible | mandatory | An entry in the DSL Port Information table. |
| 1.3.6.1.4.1.1996.10.3.3.1.1 | ColumncmCpeHDSLModemIndex | read-only | mandatory | The value of this object indicates the combination of shelf, port and slot number (i.e ifIndex). |
| 1.3.6.1.4.1.1996.10.3.3.1.2 | ColumncmCpeHDSLModemType | read-only | mandatory | The value of this object specifies the bit pump type. |
| 1.3.6.1.4.1.1996.10.3.3.1.3 | ColumncmCpeHDSLModemTxGain | read-only | mandatory | The value of this object specifies the transmit gain. |
| 1.3.6.1.4.1.1996.10.3.3.1.4 | ColumncmCpeHDSLModemTestMode | read-only | mandatory | The value of this Object is the test mode in operation. Please note that in future SW releases this attributes shall only be accessible to diagnostic engineers. |
| 1.3.6.1.4.1.1996.10.3.3.1.5 | ColumncmCpeHDSLModemNoiseMargin | read-only | mandatory | The value of this object specifies the noise margin of the receiver. |
| 1.3.6.1.4.1.1996.10.3.3.1.7 | ColumncmCpeHDSLModemBPSwMajorVersion | read-only | mandatory | The value of this Object is the major Sw Version Number. |
| 1.3.6.1.4.1.1996.10.3.3.1.8 | ColumncmCpeHDSLModemBPSwMinorVersion | read-only | mandatory | The value of this Object is the minor Sw Version Number. |
| 1.3.6.1.4.1.1996.10.3.3.1.9 | ColumncmCpeHDSLModemBPHwVersion | read-only | mandatory | The value of this Object is the Hw Version Number. |
| 1.3.6.1.4.1.1996.10.3.3.1.14 | ColumncmCpeHDSLModemDataRate | read-only | mandatory | This object sets/displays the data rate, in kbps, for this port. |
| 1.3.6.1.4.1.1996.10.3.4 | TablecmSDSLTestTable | not-accessible | mandatory | This table is to configure and monitor loop tests on an SDSL port. There is one instance of this table per SDSL port. |
| 1.3.6.1.4.1.1996.10.3.4.1 | RowcmSDSLTestEntry | not-accessible | mandatory | An entry in the SDSL Test table. |
| 1.3.6.1.4.1.1996.10.3.4.1.1 | ColumncmSDSLTestIndex | read-only | mandatory | This is the PII of the DSL port associated with the Loop Test. This is also the index into this table. |
| 1.3.6.1.4.1.1996.10.3.4.1.2 | ColumncmSDSLTestAction | read-write | mandatory | This field is used by the operator to start/stop the loop test on an SDSL modem. The value None is a read-only value that is displayed. The operator sets the a… |
| 1.3.6.1.4.1.1996.10.3.4.1.3 | ColumncmSDSLTestStatus | read-only | mandatory | The status field indicates whether a test is currently in progress. If the value is None, no test has been initiated since powerup. If the status is Complete, … |
| 1.3.6.1.4.1.1996.10.3.4.1.4 | ColumncmSDSLTestTestCompleteTime | read-only | mandatory | This is the calendar time when the last test was completed. If no test has been run since powerup, this field displays a null string. |
| 1.3.6.1.4.1.1996.10.3.4.1.5 | ColumncmSDSLTestContinuityTestResult | read-only | mandatory | This is the current result of the continuity test. This field is updated during the continuity test at least every second. This object retains its value after … |
| 1.3.6.1.4.1.1996.10.3.4.1.6 | ColumncmSDSLTestNearEndLoopProfile | read-only | mandatory | This field contains the current estimation of whether there is a possible short or open within 500 feet of the system. This object retains its value after the … |
| 1.3.6.1.4.1.1996.10.3.4.1.7 | ColumncmSDSLTestDebugResult | read-only | mandatory | This is a generic 32-bit value that conatins internal information about the test, used for debugging. This object retains its value after the test is stopped. |
| 1.3.6.1.4.1.1996.10.3.4.1.8 | ColumncmSDSLTestType | read-write | mandatory | Specifies the test type. 'profile' checks the line profile and runs until commanded to stop. 'seekMaxRate' determines the maximum rate at which a line will tra… |
| 1.3.6.1.4.1.1996.10.3.4.1.9 | ColumncmSDSLTestMaxRate | read-only | mandatory | Upon completion of 'seekMaxRate', this field represents the maximum rate the link will train at. |
| 1.3.6.1.4.1.1996.10.4 | NodecmIface | |||
| 1.3.6.1.4.1.1996.10.4.1 | TablecmIfaceTable | not-accessible | mandatory | The interface information table to manage the highest level of interface configuration, including networking model, IP and MAC addresses, encapsulation formats… |
| 1.3.6.1.4.1.1996.10.4.1.1 | RowcmIfaceEntry | not-accessible | mandatory | An entry in the cmIface table. |
| 1.3.6.1.4.1.1996.10.4.1.1.1 | ColumncmIfacePII | read-only | mandatory | This object identifies the network interface PII. |
| 1.3.6.1.4.1.1996.10.4.1.1.2 | ColumncmIfaceIfIndex | read-only | mandatory | This object identifies the ifIndex associated with this interface |
| 1.3.6.1.4.1.1996.10.4.1.1.3 | ColumncmIfaceNetModel | read-write | mandatory | This object defines the Networking Model used on this interface. IP indicates IP-LAN-extension networking. VWAN indicates Wide Area Lan Extension. Frame indica… |
| 1.3.6.1.4.1.1996.10.4.1.1.4 | ColumncmIfaceIpAddr | read-write | mandatory | For NetModel=IP, the IP Address of this interface. |
| 1.3.6.1.4.1.1996.10.4.1.1.5 | ColumncmIfaceNetMask | read-write | mandatory | For NetModel=IP, the Subnet Mask for this interface. |
| 1.3.6.1.4.1.1996.10.4.1.1.6 | ColumncmIfaceMacAddr | read-only | mandatory | The working MAC address of the CPE connected to this DSL interface, if applicable. Reads as 0.0.0.0.0.0 or FF.FF.FF.FF.FF.FF if not applicable. Note that the w… |
| 1.3.6.1.4.1.1996.10.4.1.1.7 | ColumncmIfaceBurnedInMacAddr | read-only | mandatory | This object displays the burned in MAC address of the CPE connected to this DSL interface, if it has one, and supports CMCP. |
| 1.3.6.1.4.1.1996.10.4.1.1.8 | ColumncmIfaceFarEndAddr | read-write | mandatory | For NetModel=IP or CopperVPN, this object specifies the IP address of the device connected at the far end of this interface. |
| 1.3.6.1.4.1.1996.10.4.1.1.9 | ColumncmIfaceDestPII | read-write | mandatory | This object specifies the destination PII for user-data packets received on this interface. |
| 1.3.6.1.4.1.1996.10.4.1.1.10 | ColumncmIfaceFwdMode | read-only | mandatory | This is the packet forwarding mode used to route packets received on this interface. The system determines this parameter internally from the NetModel and othe… |
| 1.3.6.1.4.1.1996.10.4.1.1.11 | ColumncmIfaceName | read-write | mandatory | A name optionally assigned by the network operator. |
| 1.3.6.1.4.1.1996.10.4.1.1.12 | ColumncmIfaceAdditionalInfo | read-write | mandatory | Additional information about this interface that is optionally provided by the operator. |
| 1.3.6.1.4.1.1996.10.4.1.1.13 | ColumncmIfaceCMCPCompatible | read-write | mandatory | This object has meaning for DSL links only. This object specifies whether the CPE at the end of the DSL link uses Copper Mountain's Internal Control Protocol (… |
| 1.3.6.1.4.1.1996.10.4.1.1.14 | ColumncmIfaceEncapsulationType | read-write | mandatory | This object specifies the encapsulation type of the link. For VWAN and IP network models the choices are rfc1483 or rfc1490. Frame mode supports those and othe… |
| 1.3.6.1.4.1.1996.10.4.1.1.15 | ColumncmIfaceGroupName | read-write | mandatory | This object defines the name of the user group to which this protocol interface belongs. Note that the user group must exist in the cmGroupTable before the val… |
| 1.3.6.1.4.1.1996.10.4.1.1.16 | ColumncmIfaceServiceClass | read-write | mandatory | The value of this object indicates the current service class of the relevant DSL port on this system. |
| 1.3.6.1.4.1.1996.10.4.2 | TablecmSubIfaceTable | not-accessible | mandatory | The cmSubIfaceTable is used to manage virtual circuits on a DSL link. Note that for every entry in the cmSubIfaceTable there must be is a corresponding entry i… |
| 1.3.6.1.4.1.1996.10.4.2.1 | RowcmSubIfaceEntry | not-accessible | mandatory | An entry in the cmSubIfaceTable. |
| 1.3.6.1.4.1.1996.10.4.2.1.1 | ColumncmSubIfacePII | read-only | mandatory | This object is a unique identifier for this DSL circuit. If the DSL link is configured for Frame Relay then cmDSLCircuitId is the DLCI. |
| 1.3.6.1.4.1.1996.10.4.2.1.2 | ColumncmSubIfaceDestPII | read-write | mandatory | The value of this object identifies the far end network interface, i.e. the WAN VC to which this DSL VC is mapped, from the shelf, slot, port and user channel.… |
| 1.3.6.1.4.1.1996.10.4.2.1.3 | ColumncmSubIfaceName | read-write | mandatory | The value of this object is the user assigned name of this virtual circuit. |
| 1.3.6.1.4.1.1996.10.4.2.1.4 | ColumncmSubIfaceRowStatus | read-write | mandatory | This object is the rowStatus of the DSL Circuit. A DSL circuit is enabled by setting this object to 'active'. An entry in this table is created by setting this… |
| 1.3.6.1.4.1.1996.10.4.2.1.5 | ColumncmSubIfacePriority | read-write | mandatory | Specifies the priority of this VC on the DSL physical interface. The system does NOT distinguish between packets within a VC. Consistent with Frame-Relay requi… |
| 1.3.6.1.4.1.1996.10.5 | NodecmEthernet | |||
| 1.3.6.1.4.1.1996.10.5.1 | TablecmCpeEthernetIntervalTable | not-accessible | mandatory | Enet Port info about Perf Counters |
| 1.3.6.1.4.1.1996.10.5.1.1 | RowcmCpeEthernetIntervalEntry | not-accessible | mandatory | Enet Port Performance Monitoring Counters |
| 1.3.6.1.4.1.1996.10.5.1.1.1 | ColumncmCpeEthernetIndex | read-only | mandatory | Ethernet port (interface) number (i.e ifIndex) |
| 1.3.6.1.4.1.1996.10.5.1.1.2 | ColumncmCpeEthernetIntervalNumber | read-only | mandatory | A value between 1 and 24, where 1 is the most recent hour interval and 24 is the oldest hour interval |
| 1.3.6.1.4.1.1996.10.5.1.1.3 | ColumncmCpeEthernetIntUnknowns | read-only | mandatory | Count of Unknown Interrupt Events. |
| 1.3.6.1.4.1.1996.10.5.1.1.4 | ColumncmCpeEthernetRxOK | read-only | mandatory | Count of Successful Receptions. |
| 1.3.6.1.4.1.1996.10.5.1.1.5 | ColumncmCpeEthernetRxNoBufs | read-only | mandatory | This is the count of times couldn't get CPE Buffers. |
| 1.3.6.1.4.1.1996.10.5.1.1.6 | ColumncmCpeEthernetRxMiss | read-only | mandatory | This is the count of times chip couldn't receive frames. |
| 1.3.6.1.4.1.1996.10.5.1.1.7 | ColumncmCpeEthernetRxSkip | read-only | mandatory | Count of implied received skips. |
| 1.3.6.1.4.1.1996.10.5.1.1.8 | ColumncmCpeEthernetRxRunt | read-only | mandatory | Count of runt frames received. |
| 1.3.6.1.4.1.1996.10.5.1.1.9 | ColumncmCpeEthernetRxExtraData | read-only | mandatory | Count of times extra data received. |
| 1.3.6.1.4.1.1996.10.5.1.1.10 | ColumncmCpeEthernetRxCRCError | read-only | mandatory | Count of CRC Errors. |
| 1.3.6.1.4.1.1996.10.5.1.1.11 | ColumncmCpeEthernetRxAlignError | read-only | mandatory | Count of Received Frame Alignment Errors. |
| 1.3.6.1.4.1.1996.10.5.1.1.12 | ColumncmCpeEthernetRxDribbleBits | read-only | mandatory | Count of extra bits received. |
| 1.3.6.1.4.1.1996.10.5.1.1.13 | ColumncmCpeEthernetTxTooBig | read-only | mandatory | Count of times requested transmit length > 1518 bytes. |
| 1.3.6.1.4.1.1996.10.5.1.1.14 | ColumncmCpeEthernetTxNotReady | read-only | mandatory | Count of times transmitter being not ready. |
| 1.3.6.1.4.1.1996.10.5.1.1.15 | ColumncmCpeEthernetTxLossCRS | read-only | mandatory | Count of loss of carrier sense. |
| 1.3.6.1.4.1.1996.10.5.1.1.16 | ColumncmCpeEthernetTxSQEErr | read-only | mandatory | Count of SQE Errors. |
| 1.3.6.1.4.1.1996.10.5.1.1.17 | ColumncmCpeEthernetTxOutOfWindow | read-only | mandatory | Count of late collisions. |
| 1.3.6.1.4.1.1996.10.5.1.1.18 | ColumncmCpeEthernetTxJabber | read-only | mandatory | Count of transmits > 26 milliseconds. |
| 1.3.6.1.4.1.1996.10.5.1.1.19 | ColumncmCpeEthernetTx16Collisions | read-only | mandatory | Count of 16 txmit-collisions for a single frame. |
| 1.3.6.1.4.1.1996.10.5.1.1.20 | ColumncmCpeEthernetTxCollisions | read-only | mandatory | Count of total txmit-collisions. |
| 1.3.6.1.4.1.1996.10.5.1.1.21 | ColumncmCpeEthernetTxOK | read-only | mandatory | Count of successful transmissions. |
| 1.3.6.1.4.1.1996.10.6 | NodecmFilter | |||
| 1.3.6.1.4.1.1996.10.6.1 | TablecmFilterTable | not-accessible | mandatory | Filters to manage IP Interfaces. |
| 1.3.6.1.4.1.1996.10.6.1.1 | RowcmFilterEntry | not-accessible | mandatory | An entry in the cmFilter Table. |
| 1.3.6.1.4.1.1996.10.6.1.1.1 | ColumncmFilterIndex | read-only | mandatory | The value of this object identifies the PII (Permanent Interface Identifier) of the interface to which this filter applies. |
| 1.3.6.1.4.1.1996.10.6.1.1.2 | ColumncmFilterFilterNumber | read-only | mandatory | The value of this object identifies the Filter's place in the filter list. |
| 1.3.6.1.4.1.1996.10.6.1.1.3 | ColumncmFilterFunction | read-write | mandatory | This object specifies an action to be taken on the PII specified by cmFilterIndex. Note that DeleteList deletes all of the filters associated with the given In… |
| 1.3.6.1.4.1.1996.10.6.1.1.4 | ColumncmFilterSrcMask | read-write | mandatory | The value of this object indicates the mask for the source IP Address. |
| 1.3.6.1.4.1.1996.10.6.1.1.5 | ColumncmFilterSrcAdrs | read-write | mandatory | The value of this object is the source IP Address of the IP packet being ANDed with the cmFilterSrcMask. |
| 1.3.6.1.4.1.1996.10.6.1.1.6 | ColumncmFilterDstMask | read-write | mandatory | The value of this object indicates the mask for destination IP Address. |
| 1.3.6.1.4.1.1996.10.6.1.1.7 | ColumncmFilterDstAdrs | read-write | mandatory | The value of this object is the dest IP Address of the IP packet being ANDed with the cmFilterDestMask. |
| 1.3.6.1.4.1.1996.10.6.1.1.8 | ColumncmFilterIpProtocol | read-write | mandatory | This is the value of IP Protocol Identifier. It is used to match against the IP Protocol Ids of incoming messages. The protocol identifiers are as follows: 0 =… |
| 1.3.6.1.4.1.1996.10.6.1.1.9 | ColumncmFilterSrcPortCompare | read-write | mandatory | The value of this object specifies the comparison criterion for comparing the UDP/TCP source port of the incoming packet to cmFilterSrcPort. |
| 1.3.6.1.4.1.1996.10.6.1.1.10 | ColumncmFilterSrcPort | read-write | mandatory | This object specifies the value to compare with the source port in the received packet. |
| 1.3.6.1.4.1.1996.10.6.1.1.11 | ColumncmFilterDstPortCompare | read-write | mandatory | The value of this object specifies the comparison criterion for comparing the UDP/TCP destination port of the incoming packet to cmFilterDestPort. |
| 1.3.6.1.4.1.1996.10.6.1.1.12 | ColumncmFilterDstPort | read-write | mandatory | This object specifies the value to compare with the destination port in the received packet. |
| 1.3.6.1.4.1.1996.10.6.1.1.13 | ColumncmFilterAction | read-write | mandatory | This object specifies the action taken on packets that match this filter. |
| 1.3.6.1.4.1.1996.10.7 | NodecmDSL | |||
| 1.3.6.1.4.1.1996.10.7.1 | TablecmDSLIntervalTable | not-accessible | mandatory | The DSL Interval Table contains various statistics collected by each DSL Interface over the previous 96 intervals. Samples are collected at X minute intervals … |
| 1.3.6.1.4.1.1996.10.7.1.1 | RowcmDSLIntervalEntry | not-accessible | mandatory | An entry in the DSL Interval table. |
| 1.3.6.1.4.1.1996.10.7.1.1.1 | ColumncmDSLIntervalIndex | read-only | mandatory | DSL port (interface) number (i.e ifIndex) |
| 1.3.6.1.4.1.1996.10.7.1.1.2 | ColumncmDSLIntervalNumber | read-only | mandatory | A value between 1 and 96, where 1 is the most recent 15 minute interval and 96 is the oldest 15 minute interval |
| 1.3.6.1.4.1.1996.10.7.1.1.3 | ColumncmDSLIntervalTxUnderruns | read-only | mandatory | Number of transmit underruns detected. |
| 1.3.6.1.4.1.1996.10.7.1.1.4 | ColumncmDSLIntervalRxTruncated | read-only | mandatory | Number of frames truncated due to receiver overruns. |
| 1.3.6.1.4.1.1996.10.7.1.1.5 | ColumncmDSLIntervalRxBig | read-only | mandatory | Number of receive frames that were discarded because they were too large. |
| 1.3.6.1.4.1.1996.10.7.1.1.6 | ColumncmDSLIntervalRxAborts | read-only | mandatory | Number of aborted frames received. |
| 1.3.6.1.4.1.1996.10.7.1.1.7 | ColumncmDSLIntervalRxAlignmentErrors | read-only | mandatory | Number of unaligned frames received. |
| 1.3.6.1.4.1.1996.10.7.1.1.8 | ColumncmDSLIntervalRxCRCErrors | read-only | mandatory | Number of frames received with CRC errors. |
| 1.3.6.1.4.1.1996.10.7.1.1.9 | ColumncmDSLIntervalRxOverruns | read-only | mandatory | Number of frames discarded because of receiver overruns. |
| 1.3.6.1.4.1.1996.10.7.1.1.10 | ColumncmDSLIntervalRxValidFrames | read-only | mandatory | Number of valid frames received. |
| 1.3.6.1.4.1.1996.10.7.1.1.11 | ColumncmDSLIntervalTxValidFrames | read-only | mandatory | Number of frames transmitted successfully |
| 1.3.6.1.4.1.1996.10.7.1.1.12 | ColumncmDSLIntervalRxNoBuffers | read-only | mandatory | Number of receive frames discarded due to lack of buffers. |
| 1.3.6.1.4.1.1996.10.7.1.1.13 | ColumncmDSLIntervalTimeTagBegin | read-only | mandatory | This is the time stamp indicating when the interval began. |
| 1.3.6.1.4.1.1996.10.7.1.1.14 | ColumncmDSLIntervalTimeTagEnd | read-only | mandatory | This is the time stamp indicating when the interval ended. |
| 1.3.6.1.4.1.1996.10.7.1.1.15 | ColumncmDSLIntervalMinNoiseMargin | read-only | mandatory | Minimum noise margin encountered in the interval associated with thus table. Noise Margin ins not a measurable parameter for IDSL ports; therfore this value wi… |
| 1.3.6.1.4.1.1996.10.7.1.1.16 | ColumncmDSLIntervalRxValidOctets | read-only | mandatory | Number of octets received in valid frames by the DSL port in the interval associated with this table. |
| 1.3.6.1.4.1.1996.10.7.1.1.17 | ColumncmDSLIntervalTxValidOctets | read-only | mandatory | Number of octets transmitted over the DSL port in the interval associated with this table. |
| 1.3.6.1.4.1.1996.10.7.1.1.18 | ColumncmDSLIntervalPortUpTime | read-only | mandatory | Number of seconds that the DSL port was enbabled during the associated interval. |
| 1.3.6.1.4.1.1996.10.7.2 | TablecmDSLCurrentTable | not-accessible | mandatory | The DSL Current Table contains various statistics being collected for the current interval. The length of the current interval is specified by cmAlarmSamplingI… |
| 1.3.6.1.4.1.1996.10.7.2.1 | RowcmDSLCurrentEntry | not-accessible | mandatory | An entry in the DSL Current Table |
| 1.3.6.1.4.1.1996.10.7.2.1.1 | ColumncmDSLCurrentIndex | read-only | mandatory | DSL port (interface) number (i.e ifIndex) |
| 1.3.6.1.4.1.1996.10.7.2.1.3 | ColumncmDSLCurrentTxUnderruns | read-only | mandatory | Number of transmit underruns detected. |
| 1.3.6.1.4.1.1996.10.7.2.1.4 | ColumncmDSLCurrentRxTruncated | read-only | mandatory | Number of frames truncated due to receiver overruns. |
| 1.3.6.1.4.1.1996.10.7.2.1.5 | ColumncmDSLCurrentRxBig | read-only | mandatory | Number of receive frames that were discarded because they were too large. |
| 1.3.6.1.4.1.1996.10.7.2.1.6 | ColumncmDSLCurrentRxAborts | read-only | mandatory | Number of aborted frames received. |
| 1.3.6.1.4.1.1996.10.7.2.1.7 | ColumncmDSLCurrentRxAlignmentErrors | read-only | mandatory | Number of unaligned frames received. |
| 1.3.6.1.4.1.1996.10.7.2.1.8 | ColumncmDSLCurrentRxCRCErrors | read-only | mandatory | Number of frames received with CRC errors. |
| 1.3.6.1.4.1.1996.10.7.2.1.9 | ColumncmDSLCurrentRxOverruns | read-only | mandatory | Number of frames discarded because of receiver overruns. |
| 1.3.6.1.4.1.1996.10.7.2.1.10 | ColumncmDSLCurrentRxValidFrames | read-only | mandatory | Number of valid frames received. |
| 1.3.6.1.4.1.1996.10.7.2.1.11 | ColumncmDSLCurrentTxValidFrames | read-only | mandatory | Number of frames transmitted successfully |
| 1.3.6.1.4.1.1996.10.7.2.1.12 | ColumncmDSLCurrentRxNoBuffers | read-only | mandatory | Number of receive frames discarded due to lack of buffers. |
| 1.3.6.1.4.1.1996.10.7.2.1.13 | ColumncmDSLCurrentMinNoiseMargin | read-only | mandatory | Minimum noise margin encountered in the interval associated with thus table. Noise Margin ins not a measurable parameter for IDSL ports; therfore this value wi… |
| 1.3.6.1.4.1.1996.10.7.2.1.14 | ColumncmDSLCurrentRxValidOctets | read-only | mandatory | Number of octets received in valid frames by the DSL port in the interval associated with this table. |
| 1.3.6.1.4.1.1996.10.7.2.1.15 | ColumncmDSLCurrentTxValidOctets | read-only | mandatory | Number of octets transmitted over the DSL port in the interval associated with this table. |
| 1.3.6.1.4.1.1996.10.7.2.1.16 | ColumncmDSLCurrentPortUpTime | read-only | mandatory | Number of seconds that the DSL port was enbabled during the associated interval. |
| 1.3.6.1.4.1.1996.10.7.3 | TablecmDSLYesterdaysTable | not-accessible | mandatory | The DSL Yesterday's Table contains the cumulative sum of the various statistics for the 24 hour period from midnight to midnight preceding the most recently co… |
| 1.3.6.1.4.1.1996.10.7.3.1 | RowcmDSLYesterdaysEntry | not-accessible | mandatory | An entry in cmDSLYesterdaysTable. |
| 1.3.6.1.4.1.1996.10.7.3.1.1 | ColumncmDSLYesterdaysIndex | read-only | mandatory | DSL port (interface) number (i.e ifIndex) |
| 1.3.6.1.4.1.1996.10.7.3.1.2 | ColumncmDSLYesterdaysTxUnderruns | read-only | mandatory | Number of transmit underruns detected. |
| 1.3.6.1.4.1.1996.10.7.3.1.3 | ColumncmDSLYesterdaysRxTruncated | read-only | mandatory | Number of frames truncated due to receiver overruns. |
| 1.3.6.1.4.1.1996.10.7.3.1.4 | ColumncmDSLYesterdaysRxBig | read-only | mandatory | Number of receive frames that were discarded because they were too large. |
| 1.3.6.1.4.1.1996.10.7.3.1.5 | ColumncmDSLYesterdaysRxAborts | read-only | mandatory | Number of aborted frames received. |
| 1.3.6.1.4.1.1996.10.7.3.1.6 | ColumncmDSLYesterdaysRxAlignmentErrors | read-only | mandatory | Number of unaligned frames received. |
| 1.3.6.1.4.1.1996.10.7.3.1.7 | ColumncmDSLYesterdaysRxCRCErrors | read-only | mandatory | Number of frames received with CRC errors. |
| 1.3.6.1.4.1.1996.10.7.3.1.8 | ColumncmDSLYesterdaysRxOverruns | read-only | mandatory | Number of frames discarded because of receiver overruns. |
| 1.3.6.1.4.1.1996.10.7.3.1.9 | ColumncmDSLYesterdaysRxValidFrames | read-only | mandatory | Number of valid frames received. |
| 1.3.6.1.4.1.1996.10.7.3.1.10 | ColumncmDSLYesterdaysTxValidFrames | read-only | mandatory | Number of frames transmitted successfully |
| 1.3.6.1.4.1.1996.10.7.3.1.11 | ColumncmDSLYesterdaysRxNoBuffers | read-only | mandatory | Number of receive frames discarded due to lack of buffers. |
| 1.3.6.1.4.1.1996.10.7.3.1.12 | ColumncmDSLYesterdaysMinNoiseMargin | read-only | mandatory | Minimum noise margin encountered in the interval associated with thus table. Noise Margin ins not a measurable parameter for IDSL ports; therfore this value wi… |
| 1.3.6.1.4.1.1996.10.7.3.1.13 | ColumncmDSLYesterdaysRxValidOctets | read-only | mandatory | Number of octets received in valid frames by the DSL port in the interval associated with this table. |
| 1.3.6.1.4.1.1996.10.7.3.1.14 | ColumncmDSLYesterdaysTxValidOctets | read-only | mandatory | Number of octets transmitted over the DSL port in the interval associated with this table. |
| 1.3.6.1.4.1.1996.10.7.3.1.15 | ColumncmDSLYesterdaysPortUpTime | read-only | mandatory | Number of seconds that the DSL port was enbabled during the associated interval. |
| 1.3.6.1.4.1.1996.10.7.4 | TablecmDSLTodaysTable | not-accessible | mandatory | The DSL Todays Table contains the cumulative sum of the various statistics for the period from midnight to the most recenly completed interval. |
| 1.3.6.1.4.1.1996.10.7.4.1 | RowcmDSLTodaysEntry | not-accessible | mandatory | An entry in cmDSLTodaysTable. |
| 1.3.6.1.4.1.1996.10.7.4.1.1 | ColumncmDSLTodaysIndex | read-only | mandatory | DSL port (interface) number (i.e ifIndex) |
| 1.3.6.1.4.1.1996.10.7.4.1.2 | ColumncmDSLTodaysTxUnderruns | read-only | mandatory | Number of transmit underruns detected. |
| 1.3.6.1.4.1.1996.10.7.4.1.3 | ColumncmDSLTodaysRxTruncated | read-only | mandatory | Number of frames truncated due to receiver overruns. |
| 1.3.6.1.4.1.1996.10.7.4.1.4 | ColumncmDSLTodaysRxBig | read-only | mandatory | Number of receive frames that were discarded because they were too large. |
| 1.3.6.1.4.1.1996.10.7.4.1.5 | ColumncmDSLTodaysRxAborts | read-only | mandatory | Number of aborted frames received. |
| 1.3.6.1.4.1.1996.10.7.4.1.6 | ColumncmDSLTodaysRxAlignmentErrors | read-only | mandatory | Number of unaligned frames received. |
| 1.3.6.1.4.1.1996.10.7.4.1.7 | ColumncmDSLTodaysRxCRCErrors | read-only | mandatory | Number of frames received with CRC errors. |
| 1.3.6.1.4.1.1996.10.7.4.1.8 | ColumncmDSLTodaysRxOverruns | read-only | mandatory | Number of frames discarded because of receiver overruns. |
| 1.3.6.1.4.1.1996.10.7.4.1.9 | ColumncmDSLTodaysRxValidFrames | read-only | mandatory | Number of valid frames received. |
| 1.3.6.1.4.1.1996.10.7.4.1.10 | ColumncmDSLTodaysTxValidFrames | read-only | mandatory | Number of frames transmitted successfully |
| 1.3.6.1.4.1.1996.10.7.4.1.11 | ColumncmDSLTodaysRxNoBuffers | read-only | mandatory | Number of receive frames discarded due to lack of buffers. |
| 1.3.6.1.4.1.1996.10.7.4.1.12 | ColumncmDSLTodaysMinNoiseMargin | read-only | mandatory | Minimum noise margin encountered in the interval associated with thus table. Noise Margin ins not a measurable parameter for IDSL ports; therfore this value wi… |
| 1.3.6.1.4.1.1996.10.7.4.1.13 | ColumncmDSLTodaysRxValidOctets | read-only | mandatory | Number of octets received in valid frames by the DSL port in the interval associated with this table. |
| 1.3.6.1.4.1.1996.10.7.4.1.14 | ColumncmDSLTodaysTxValidOctets | read-only | mandatory | Number of octets transmitted over the DSL port in the interval associated with this table. |
| 1.3.6.1.4.1.1996.10.7.4.1.15 | ColumncmDSLTodaysPortUpTime | read-only | mandatory | Number of seconds that the DSL port was enbabled during the associated interval. |
| 1.3.6.1.4.1.1996.10.7.5 | TablecmDSL24HrTable | not-accessible | mandatory | The DSL 24 Hour Table contains the cumulative sum of the various statistics for 96*cmAlarmSamplingInterval minutes worth of data or the preceding 24 hour perio… |
| 1.3.6.1.4.1.1996.10.7.5.1 | RowcmDSL24HrEntry | not-accessible | mandatory | An entry in cmDSL24HrTable. |
| 1.3.6.1.4.1.1996.10.7.5.1.1 | ColumncmDSL24HrIndex | read-only | mandatory | DSL port (interface) number (i.e ifIndex) |
| 1.3.6.1.4.1.1996.10.7.5.1.2 | ColumncmDSL24HrTxUnderruns | read-only | mandatory | Number of transmit underruns detected. |
| 1.3.6.1.4.1.1996.10.7.5.1.3 | ColumncmDSL24HrRxTruncated | read-only | mandatory | Number of frames truncated due to receiver overruns. |
| 1.3.6.1.4.1.1996.10.7.5.1.4 | ColumncmDSL24HrRxBig | read-only | mandatory | Number of receive frames that were discarded because they were too large. |
| 1.3.6.1.4.1.1996.10.7.5.1.5 | ColumncmDSL24HrRxAborts | read-only | mandatory | Number of aborted frames received. |
| 1.3.6.1.4.1.1996.10.7.5.1.6 | ColumncmDSL24HrRxAlignmentErrors | read-only | mandatory | Number of unaligned frames received. |
| 1.3.6.1.4.1.1996.10.7.5.1.7 | ColumncmDSL24HrRxCRCErrors | read-only | mandatory | Number of frames received with CRC errors. |
| 1.3.6.1.4.1.1996.10.7.5.1.8 | ColumncmDSL24HrRxOverruns | read-only | mandatory | Number of frames discarded because of receiver overruns. |
| 1.3.6.1.4.1.1996.10.7.5.1.9 | ColumncmDSL24HrRxValidFrames | read-only | mandatory | Number of valid frames received. |
| 1.3.6.1.4.1.1996.10.7.5.1.10 | ColumncmDSL24HrTxValidFrames | read-only | mandatory | Number of frames transmitted successfully |
| 1.3.6.1.4.1.1996.10.7.5.1.11 | ColumncmDSL24HrRxNoBuffers | read-only | mandatory | Number of receive frames discarded due to lack of buffers. |
| 1.3.6.1.4.1.1996.10.7.5.1.12 | ColumncmDSL24HrMinNoiseMargin | read-only | mandatory | Minimum noise margin encountered in the interval associated with thus table. Noise Margin ins not a measurable parameter for IDSL ports; therfore this value wi… |
| 1.3.6.1.4.1.1996.10.7.5.1.13 | ColumncmDSL24HrRxValidOctets | read-only | mandatory | Number of octets received in valid frames by the DSL port in the interval associated with this table. |
| 1.3.6.1.4.1.1996.10.7.5.1.14 | ColumncmDSL24HrTxValidOctets | read-only | mandatory | Number of octets transmitted over the DSL port in the interval associated with this table. |
| 1.3.6.1.4.1.1996.10.7.5.1.15 | ColumncmDSL24HrPortUpTime | read-only | mandatory | Number of seconds that the DSL port was enbabled during the associated interval. |
| 1.3.6.1.4.1.1996.10.7.6 | TablecmCpeDSLIntervalTable | not-accessible | mandatory | Dsl Port info about Perf Counters |
| 1.3.6.1.4.1.1996.10.7.6.1 | RowcmCpeDSLIntervalEntry | not-accessible | mandatory | Dsl Port Performance Monitoring Counters |
| 1.3.6.1.4.1.1996.10.7.6.1.1 | ColumncmCpeDSLIntervalIndex | read-only | mandatory | DSL port (interface) number (i.e ifIndex) |
| 1.3.6.1.4.1.1996.10.7.6.1.2 | ColumncmCpeDSLIntervalNumber | read-only | mandatory | A value between 1 and 24, where 1 is the most recent hour interval and 24 is the oldest hour interval |
| 1.3.6.1.4.1.1996.10.7.6.1.3 | ColumncmCpeDSLIntervalTxUnderruns | read-only | mandatory | Number of transmit underruns detected. |
| 1.3.6.1.4.1.1996.10.7.6.1.4 | ColumncmCpeDSLIntervalRxTruncated | read-only | mandatory | Number of frames truncated due to receiver overruns. |
| 1.3.6.1.4.1.1996.10.7.6.1.5 | ColumncmCpeDSLIntervalRxBig | read-only | mandatory | Number of receive frames that were discarded because they were too large. |
| 1.3.6.1.4.1.1996.10.7.6.1.6 | ColumncmCpeDSLIntervalRxAborts | read-only | mandatory | Number of aborted frames received. |
| 1.3.6.1.4.1.1996.10.7.6.1.7 | ColumncmCpeDSLIntervalRxAlignmentErrors | read-only | mandatory | Number of unaligned frames received. |
| 1.3.6.1.4.1.1996.10.7.6.1.8 | ColumncmCpeDSLIntervalRxCRCErrors | read-only | mandatory | Number of frames received with CRC errors. |
| 1.3.6.1.4.1.1996.10.7.6.1.9 | ColumncmCpeDSLIntervalRxOverruns | read-only | mandatory | Number of frames discarded because of receiver overruns. |
| 1.3.6.1.4.1.1996.10.7.6.1.10 | ColumncmCpeDSLIntervalRxValidFrames | read-only | mandatory | Number of valid frames received. |
| 1.3.6.1.4.1.1996.10.7.6.1.11 | ColumncmCpeDSLIntervalTxValidFrames | read-only | mandatory | Number of frames transmitted successfully |
| 1.3.6.1.4.1.1996.10.7.6.1.12 | ColumncmCpeDSLIntervalRxNoBuffers | read-only | mandatory | Number of receive frames discarded due to lack of buffers. |
| 1.3.6.1.4.1.1996.10.7.6.1.13 | ColumncmCpeDSLIntervalRxValidOctets | read-only | mandatory | Number of valid octets received. |
| 1.3.6.1.4.1.1996.10.7.6.1.14 | ColumncmCpeDSLIntervalTxValidOctets | read-only | mandatory | Number of valid octets transmitted. |
| 1.3.6.1.4.1.1996.10.8 | NodecmIDSL | |||
| 1.3.6.1.4.1.1996.10.8.1 | TablecmIDSLModemTable | not-accessible | mandatory | The IDSL Port Information table for Configuration and Management of IDSL ports. |
| 1.3.6.1.4.1.1996.10.8.1.1 | RowcmIDSLModemEntry | not-accessible | mandatory | An entry in the IDSL Port Information table. |
| 1.3.6.1.4.1.1996.10.8.1.1.1 | ColumncmIDSLModemIndex | read-only | mandatory | The value of this object indicates the combination of shelf, port and slot number (i.e ifIndex). |
| 1.3.6.1.4.1.1996.10.8.1.1.2 | ColumncmIDSLModemOperState | read-only | mandatory | The value of this object indicates the operability state of this port. |
| 1.3.6.1.4.1.1996.10.8.1.1.3 | ColumncmIDSLModemDataRate | read-write | mandatory | This object sets/displays the data rate, in kbps, for this port on a line card If the port is on an IDSL CPE this object only displays the data rate. |
| 1.3.6.1.4.1.1996.10.8.1.1.4 | ColumncmIDSLModemState | read-only | mandatory | This object indicates the internal IDSL state. The value 'activatedCpeDectected' will indicate trained and CPE detected on far end. |
| 1.3.6.1.4.1.1996.10.8.1.1.5 | ColumncmIDSLModemTerminationMode | read-only | mandatory | This object indicates the current operational mode of each port. All ports will operate in line terminated mode with the exception of except port #1 when it is… |
| 1.3.6.1.4.1.1996.10.8.1.1.6 | ColumncmIDSLModemCpeCode | read-write | mandatory | The value of this object describes certain charateristics that are unique to this CPE. For example line polarity, di-bit ordering, preactiviation signaling, et… |
| 1.3.6.1.4.1.1996.10.8.1.1.7 | ColumncmIDSLModemSuccessfulTrains | read-only | mandatory | The is the number of successful trains for this port. This value is zero at powerup. This value is cleared whenver the operator changes the data rate for the p… |
| 1.3.6.1.4.1.1996.10.8.1.1.8 | ColumncmIDSLModemFailedTrainingAttempts | read-only | mandatory | The is the number of failed training atttempts for this port. This value is zero at powerup. This value is cleared whenver the operator changes the data rate f… |
| 1.3.6.1.4.1.1996.10.8.1.1.9 | ColumncmIDSLModemCpeResponses | read-only | mandatory | The is the number of CPE responses to training sequences that have been seen on this port. The responses may lead to successful trains or not. This value is ze… |
| 1.3.6.1.4.1.1996.10.8.1.1.10 | ColumncmIDSLModemNetworkElements | read-only | mandatory | The value of this object indicates the current number of network elements in the loop including the CPE. This value will be 'invalid' when the LC modem is in N… |
| 1.3.6.1.4.1.1996.10.8.1.1.11 | ColumncmIDSLModemActivationInterval | read-write | mandatory | This is the re-training frequency (in seconds). Upon unsuccessful training, the LC shall wait cmIDSLModemActivationInterval seconds before attempting to retry.… |
| 1.3.6.1.4.1.1996.10.8.2 | TablecmCpeIDSLModemTable | not-accessible | mandatory | The IDSL Port Information table for Configuration and Management of IDSL ports. |
| 1.3.6.1.4.1.1996.10.8.2.1 | RowcmCpeIDSLModemEntry | not-accessible | mandatory | An entry in the IDSL Port Information table. |
| 1.3.6.1.4.1.1996.10.8.2.1.1 | ColumncmCpeIDSLModemIndex | read-only | mandatory | The value of this object indicates the combination of shelf, port and slot number (i.e ifIndex). |
| 1.3.6.1.4.1.1996.10.8.2.1.2 | ColumncmCpeIDSLModemOperState | read-only | mandatory | The value of this object indicates the operability state of this port. |
| 1.3.6.1.4.1.1996.10.8.2.1.3 | ColumncmCpeIDSLModemDataRate | read-only | mandatory | This object sets/displays the data rate, in kbps, for this port on a line card If the port is on an IDSL CPE this object only displays the data rate. |
| 1.3.6.1.4.1.1996.10.8.2.1.4 | ColumncmCpeIDSLModemState | read-only | mandatory | This object indicates the internal IDSL state. |
| 1.3.6.1.4.1.1996.10.8.2.1.5 | ColumncmCpeIDSLModemTerminationMode | read-only | mandatory | This object indicates the current operational mode of each port. All ports will operate in line terminated mode with the exception of except port #1 when it is… |
| 1.3.6.1.4.1.1996.10.9 | NodecmFrameRelay | |||
| 1.3.6.1.4.1.1996.10.9.1 | TablecmFrDlcmiTable | not-accessible | mandatory | The Parameters for the Data Link Connection Management Interface for the frame relay service on this interface. |
| 1.3.6.1.4.1.1996.10.9.1.1 | RowcmFrDlcmiEntry | not-accessible | mandatory | The Parameters for a particular Data Link Connection Management Interface. |
| 1.3.6.1.4.1.1996.10.9.1.1.1 | ColumncmFrDlcmiIfIndex | read-only | mandatory | The value of this object identifies the WAN port interface from the shelf, slot, port. PII stands for Permanent Interface Identifier. |
| 1.3.6.1.4.1.1996.10.9.1.1.2 | ColumncmFrDlcmiAdminState | read-write | mandatory | This object is an opertor configurable state that specifies whether this interface is to be activated. |
| 1.3.6.1.4.1.1996.10.9.1.1.3 | ColumncmFrDlcmiOperState | read-only | mandatory | This object displays the operational state of the frame relay link. The state is Enabled if: (1) the physical port ifTableOperStatus is Up, (2) cmFrDlcmiAdminS… |
| 1.3.6.1.4.1.1996.10.9.1.1.4 | ColumncmFrDlcmiFirstDLCI | read-only | mandatory | This object identifies the first DLCI that is assigned to this DSL link. |
| 1.3.6.1.4.1.1996.10.9.1.1.5 | ColumncmFrDlcmiLMIMode | read-write | mandatory | If LMI polling is used, this indicates whether this circuit is performing polling (DTE) or is bing polled (DCE), or both (NNI) |
| 1.3.6.1.4.1.1996.10.9.1.1.6 | ColumncmFrDlcmiDceN392 | read-write | mandatory | This gives the time interval in which a Status Enquiry is expected to be received from the user. If a Status Enquiry is not received during this time interval,… |
| 1.3.6.1.4.1.1996.10.9.1.1.7 | ColumncmFrDlcmiDceN393 | read-write | mandatory | This is the number of N392 intervals over which the error threshold is counted. For example, if within 'DceN393' number of events the station receives 'DceN392… |
| 1.3.6.1.4.1.1996.10.9.1.1.8 | ColumncmFrDlcmiDceT392 | read-write | mandatory | The value of this object the polling verification timer in units of seconds. The system stops the timer whenever it receives a STATUS ENQUIRY message from the … |
| 1.3.6.1.4.1.1996.10.9.1.1.10 | ColumncmFrDlcmiRcvUnknownDLCI | read-only | mandatory | The number of frames with an unknown DLCI received on this interface. |
| 1.3.6.1.4.1.1996.10.9.1.1.11 | ColumncmFrDlcmiLMITxStatusEnquiries | read-only | mandatory | The total number of LMI status enquiries sent by the DTE on this interface. |
| 1.3.6.1.4.1.1996.10.9.1.1.12 | ColumncmFrDlcmiLMITxStatusResponses | read-only | mandatory | The total number of LMI status responses sent by the DCE on this interface. |
| 1.3.6.1.4.1.1996.10.9.1.1.13 | ColumncmFrDlcmiLMIRxStatusEnquiries | read-only | mandatory | The total number of LMI status enquiries received by the DCE on this interface. |
| 1.3.6.1.4.1.1996.10.9.1.1.14 | ColumncmFrDlcmiLMIRxStatusResponses | read-only | mandatory | The total number of LMI status responses received by the DTE on this interface. |
| 1.3.6.1.4.1.1996.10.9.1.1.15 | ColumncmFrDlcmiLMIRxUpdates | read-only | mandatory | The total number of LMI status updates received by the DTE on this interface. |
| 1.3.6.1.4.1.1996.10.9.1.1.16 | ColumncmFrDlcmiUnknownLMIMessagesRcvd | read-only | mandatory | The total number of unknown LMI messages received on this interface. |
| 1.3.6.1.4.1.1996.10.9.1.1.17 | ColumncmFrDlcmiLostLMISequences | read-only | mandatory | The total number of times a loss of sequencing in received LMI messages was detected by the DTE on this interface. |
| 1.3.6.1.4.1.1996.10.9.2 | TablecmFrCircuitTable | not-accessible | mandatory | A table containing information about specific Data Link Connection Identifiers and corresponding virtual circuits. |
| 1.3.6.1.4.1.1996.10.9.2.1 | RowcmFrCircuitEntry | not-accessible | mandatory | The information regarding a single Data Link Connection Identifier. |
| 1.3.6.1.4.1.1996.10.9.2.1.1 | ColumncmFrCircuitIfIndex | read-only | mandatory | The ifIndex Value of the ifEntry this virtual circuit is layered onto. |
| 1.3.6.1.4.1.1996.10.9.2.1.2 | ColumncmFrCircuitDlci | read-only | mandatory | The Data Link Connection Identifier for this virtual circuit. |
| 1.3.6.1.4.1.1996.10.9.2.1.3 | ColumncmFrCircuitOperState | read-only | mandatory | This object displays the operational state of a PVC. The state is Enabled if: (1) cmFrDlcmiOperState is Enabled for the frame relay link, (2) frCircuitState is… |
| 1.3.6.1.4.1.1996.10.9.2.1.4 | ColumncmFrCircuitFramesDroppedTxUnavail | read-only | mandatory | Number of Tx frames which were dropped on this circuit because the link was down or the permanent virtual circuit was inactive. |
| 1.3.6.1.4.1.1996.10.9.2.1.5 | ColumncmFrCircuitFramesDroppedRxUnavail | read-only | mandatory | Number of Rx frames which were dropped on this circuit because the link was down or the permanent virtual circuit was inactive. |
| 1.3.6.1.4.1.1996.10.9.2.1.6 | ColumncmFrCircuitFramesDroppedExcess | read-only | mandatory | Number of frames which were dropped on this circuit because the hold queue was full. |
| 1.3.6.1.4.1.1996.10.10 | NodecmATM | |||
| 1.3.6.1.4.1.1996.10.10.1 | TablecmAtmVclTable | not-accessible | mandatory | The configuration parameters for the ATM VC on this interface. |
| 1.3.6.1.4.1.1996.10.10.1.1 | RowcmAtmVclEntry | not-accessible | mandatory | The configuration parameters for a particular ATM VC. |
| 1.3.6.1.4.1.1996.10.10.1.1.1 | ColumncmAtmVclPII | read-only | mandatory | This is the index into this table. This is the PII of the DS3 port used for this ATM interface together with the link identifier for the VCL. |
| 1.3.6.1.4.1.1996.10.10.1.1.2 | ColumncmAtmVclVpi | read-write | mandatory | The VPI value of the VCL. NOTE: Vpi 0 is reserved for ATM Link Management functions. |
| 1.3.6.1.4.1.1996.10.10.1.1.3 | ColumncmAtmVclVci | read-write | mandatory | The VCI value of the VCL. NOTE: Vci values 0-31 are reserved for Path management functions. |
| 1.3.6.1.4.1.1996.10.10.1.1.4 | ColumncmAtmVclAdminStatus | read-write | mandatory | This object is instanciated only for a VCL which terminates a VCC (i.e., one which is NOT cross-connected to other VCLs). Its value specifies the desired admin… |
| 1.3.6.1.4.1.1996.10.10.1.1.5 | ColumncmAtmVclOperStatus | read-only | mandatory | The current operational status of the VCL. |
| 1.3.6.1.4.1.1996.10.10.1.1.6 | ColumncmAtmVclLastChange | read-only | mandatory | The value of sysUpTime at the time this VCL entered its current operational state. |
| 1.3.6.1.4.1.1996.10.10.1.1.7 | ColumncmAtmVclAalType | read-only | mandatory | An instance of this object only exists when the local VCL end-point is also the VCC end-point, and AAl is in use. It is the type of AAL used on this VCC. The A… |
| 1.3.6.1.4.1.1996.10.10.1.1.8 | ColumncmAtmVclAal5CpcsTransmitSduSize | read-only | mandatory | An instance of this object only exists when the local VCL end-point is also the VCC end-point, and AAL5 is in use. It is the maximum AAl5 CPCS SDU size, in oct… |
| 1.3.6.1.4.1.1996.10.10.1.1.9 | ColumncmAtmVclAal5CpcsReceiveSduSize | read-only | mandatory | An instance of this object only exists when the local VCL end-point is also the VCC end-point, and AAL5 is in use. It is the maximum AAl5 CPCS SDU size, in oct… |
| 1.3.6.1.4.1.1996.10.10.1.1.10 | ColumncmAtmVclRowStatus | read-write | mandatory | This object is used to create, modify, or delete a row in the table. To create a new VCL, set this object initially to 'createAndGo' (for sanity checking), or … |
| 1.3.6.1.4.1.1996.10.10.2 | TablecmDS3AtmTable | not-accessible | mandatory | This is a proprietary table used to configure some specific attributes of the DS3-ATM interface that are not defined in any of the standard MIBs. |
| 1.3.6.1.4.1.1996.10.10.2.1 | RowcmDS3AtmEntry | not-accessible | mandatory | The configuration parameters for a particular DS3-ATM interface. |
| 1.3.6.1.4.1.1996.10.10.2.1.1 | ColumncmDS3AtmPII | read-only | mandatory | This is the index into this table. |
| 1.3.6.1.4.1.1996.10.10.2.1.2 | ColumncmDS3AtmCbitParityEnable | read-write | mandatory | This object enables C-bit Parity checking on the DS3-ATM interface. If this port is connected to an M23 configured interface, this field should be set to 'disa… |
| 1.3.6.1.4.1.1996.10.10.2.1.3 | ColumncmDS3AtmCellPayloadScrambling | read-write | mandatory | This object is used to enable/disable payload scrambling on the DS3-ATM interface. DEFAULT: disable |
| 1.3.6.1.4.1.1996.10.10.2.1.4 | ColumncmDS3AtmCellMapping | read-write | mandatory | This object is used to configure the physical layer data format on the DS3-ATM interface. DEFAULT: hec |
| 1.3.6.1.4.1.1996.10.11 | NodecmIMUX | |||
| 1.3.6.1.4.1.1996.10.11.1 | TablecmBundleTable | not-accessible | mandatory | This table contains the currently configured IMUX bundles. Bundle is a logical entity and represents the collection of ports. Each entry in the table is repres… |
| 1.3.6.1.4.1.1996.10.11.1.1 | RowcmBundleEntry | not-accessible | mandatory | Each entry in the table represents collection of ports for the IMUX bundle. An entry in the table is indexed by bundle PII. (Bundle PII is a logical entity ide… |
| 1.3.6.1.4.1.1996.10.11.1.1.1 | ColumncmBundlePII | read-only | mandatory | This value is used as an index into the table. An IMUX BundlePII is a logical PII and is identified by a logical slot number of of 51. |
| 1.3.6.1.4.1.1996.10.11.1.1.2 | ColumncmBundleRowStatus | read-write | mandatory | This object is the rowStatus of the IMUX bundle. An IMUX bundle is enabled by setting this object to 'active' and is destroyed by setting this object to 'destr… |
| 1.3.6.1.4.1.1996.10.11.1.1.3 | ColumncmBundleMember1PII | read-write | mandatory | This is the PII of the first constituent DSL port. |
| 1.3.6.1.4.1.1996.10.11.1.1.4 | ColumncmBundleMember1EndPointID | read-only | mandatory | This is the EndPoint ID that uniquely identifies the IMUX CPE connected to the DSL port indicated by Member1PII. |
| 1.3.6.1.4.1.1996.10.11.1.1.5 | ColumncmBundleMember1Status | read-only | mandatory | This object indicates the current status of this DSL port. 'None' indicates that there is no link configured or the configured link has not trained. 'Active' i… |
| 1.3.6.1.4.1.1996.10.11.1.1.6 | ColumncmBundleMember2PII | read-write | mandatory | This is the PII of the second constituent DSL port. |
| 1.3.6.1.4.1.1996.10.11.1.1.7 | ColumncmBundleMember2EndPointID | read-only | mandatory | This is the EndPoint ID that uniquely identifies the IMUX CPE connected to the DSL port indicated by Member2PII. |
| 1.3.6.1.4.1.1996.10.11.1.1.8 | ColumncmBundleMember2Status | read-only | mandatory | This object indicates the current status of this DSL port. 'None' indicates that there is no link configured or the configured link has not trained. 'Active' i… |
| 1.3.6.1.4.1.1996.10.11.1.1.9 | ColumncmBundleMember3PII | read-write | mandatory | This is the PII of the third constituent DSL port. |
| 1.3.6.1.4.1.1996.10.11.1.1.10 | ColumncmBundleMember3EndPointID | read-only | mandatory | This is the EndPoint ID that uniquely identifies the IMUX CPE connected to the DSL port indicated by Member3PII. |
| 1.3.6.1.4.1.1996.10.11.1.1.11 | ColumncmBundleMember3Status | read-only | mandatory | This object indicates the current status of this DSL port. 'None' indicates that there is no link configured or the configured link has not trained. 'Active' i… |
| 1.3.6.1.4.1.1996.10.11.1.1.12 | ColumncmBundleMember4PII | read-write | mandatory | This is the PII of the fourth constituent DSL port. |
| 1.3.6.1.4.1.1996.10.11.1.1.13 | ColumncmBundleMember4EndPointID | read-only | mandatory | This is the EndPoint ID that uniquely identifies the IMUX CPE connected to the DSL port indicated by Member4PII. |
| 1.3.6.1.4.1.1996.10.11.1.1.14 | ColumncmBundleMember4Status | read-only | mandatory | This object indicates the current status of this DSL port. 'None' indicates that there is no link configured or the configured link has not trained. 'Active' i… |
| 1.3.6.1.4.1.1996.10.12 | NodecmDataPort | |||
| 1.3.6.1.4.1.1996.10.12.1 | TablecmCpeDataPortTable | not-accessible | mandatory | This table contains configuration and status information for the EIA530 ports. The index for this table is the PII of the system port connected to one of the I… |
| 1.3.6.1.4.1.1996.10.12.1.1 | RowcmCpeDataPortEntry | not-accessible | mandatory | Each entry in the table contains configuration and status information for a data port. The index for this table is the PII of the system port connected to one … |
| 1.3.6.1.4.1.1996.10.12.1.1.1 | ColumncmCpeDataPortIndex | read-only | mandatory | PII of the system port connected to one of the IMUX DSL ports. |
| 1.3.6.1.4.1.1996.10.12.1.1.2 | ColumncmCpeDataPortType | read-only | mandatory | Data Port Type i.e. EIA-530 or V.35. |
| 1.3.6.1.4.1.1996.10.12.1.1.3 | ColumncmCpeDataPortForceDSR | read-write | mandatory | If enabled, DSR is ON regardless of OperState. |
| 1.3.6.1.4.1.1996.10.12.1.1.4 | ColumncmCpeDataPortIgnoreDTR | read-write | mandatory | If this object is set to yes, CPE will not monitor DTR signal line. If set to no, CPE will de-assert DCD if DTR signal is OFF. |
| 1.3.6.1.4.1.1996.10.12.1.1.5 | ColumncmCpeDataPortIgnoreRTS | read-write | mandatory | If this object is set to yes, CPE will not monitor RTS signal line. If set to no, CPE will de-assert DCD if RTS signal is OFF. |
| 1.3.6.1.4.1.1996.10.12.1.1.6 | ColumncmCpeDataPortTerminalTiming | read-write | mandatory | If this object is set to yes, CPE will assert terminal timing. |
| 1.3.6.1.4.1.1996.10.12.1.1.7 | ColumncmCpeDataPortTM | read-only | mandatory | Current state of TM signal. It is asserted when LL is ON. |
| 1.3.6.1.4.1.1996.10.12.1.1.8 | ColumncmCpeDataPortLL | read-only | mandatory | Current state of LL signal. Local loopback is generated by DTE device. |
| 1.3.6.1.4.1.1996.10.12.1.1.9 | ColumncmCpeDataPortRL | read-only | mandatory | Current state of RL signal. Remote loopback is generated by DTE device. |
| 1.3.6.1.4.1.1996.10.12.1.1.10 | ColumncmCpeDataPortDTR | read-only | mandatory | Current state of DTR signal. |
| 1.3.6.1.4.1.1996.10.12.1.1.11 | ColumncmCpeDataPortRTS | read-only | mandatory | Current state of RTS signal. |
| 1.3.6.1.4.1.1996.10.12.1.1.12 | ColumncmCpeDataPortDSR | read-only | mandatory | Current state of DSR signal. DSR is on if OperState value is enabled or testing. |
| 1.3.6.1.4.1.1996.10.12.1.1.13 | ColumncmCpeDataPortCTS | read-only | mandatory | Current state of CTS signal. |
| 1.3.6.1.4.1.1996.10.12.1.1.14 | ColumncmCpeDataPortDCD | read-only | mandatory | Current state of DCD signal. |
| 1.3.6.1.4.1.1996.10.12.1.1.15 | ColumncmCpeDataPortTxClockSource | read-only | mandatory | Indicates whether the clock source is internal or external. |
| 1.3.6.1.4.1.1996.10.12.1.1.16 | ColumncmCpeDataPortDTEDCE | read-only | mandatory | Indicates whether the port is operating as DTE or DCE. |
| 1.3.6.1.4.1.1996.10.12.1.1.17 | ColumncmCpeDataPortCRC | read-only | mandatory | Indicates the type of CRC used on packets. |
| 1.3.6.1.4.1.1996.10.12.1.1.18 | ColumncmCpeDataPortClockRate | read-only | mandatory | Clock rate of port in bps(bits per second). Defaults to 1544000 for loopback. Default to 1544000 for loopback. |
| 1.3.6.1.4.1.1996.10.12.1.1.19 | ColumncmCpeDataPortAdminState | read-write | mandatory | Current administrative state of the port. |
| 1.3.6.1.4.1.1996.10.12.1.1.20 | ColumncmCpeDataPortOperState | read-only | mandatory | Current operational state of the the port. Allowed values are diabled, enabled, testing. |
| 1.3.6.1.4.1.1996.10.12.1.1.21 | ColumncmCpeDataPortLoopbackConfig | read-write | mandatory | Loopback configuration state of the port. |
| 1.3.6.1.4.1.1996.10.12.1.1.22 | ColumncmCpeDataPortLoopbackStatus | read-only | mandatory | Loopback status of the port. |
| 1.3.6.1.4.1.1996.10.12.2 | TablecmCpeDataPortIntervalTable | not-accessible | mandatory | This table provides the transmit and receive statistics for the data ports. Sampling inteval is 15 minutes and each data port contains at the most 96 intervals… |
| 1.3.6.1.4.1.1996.10.12.2.1 | RowcmCpeDataPortIntervalEntry | not-accessible | mandatory | Each entry in the table contains the transmit and receive statistics for a data port. The index for this table is the PII of the system port connected to one o… |
| 1.3.6.1.4.1.1996.10.12.2.1.1 | ColumncmCpeDataPortIntervalIndex | read-only | mandatory | PII of the system port connected to one of the IMUX DSL ports. |
| 1.3.6.1.4.1.1996.10.12.2.1.2 | ColumncmCpeDataPortIntervalIntervalNumber | read-only | mandatory | Interval number. Interval durations is 15 minutes. Interval number 1 represents the current interval. |
| 1.3.6.1.4.1.1996.10.12.2.1.3 | ColumncmCpeDataPortIntervalRxFrames | read-only | mandatory | Number of frames received on the data port in this interval. |
| 1.3.6.1.4.1.1996.10.12.2.1.4 | ColumncmCpeDataPortIntervalRxOctets | read-only | mandatory | Number of octets received on the data port in this interval. |
| 1.3.6.1.4.1.1996.10.12.2.1.5 | ColumncmCpeDataPortIntervalRxDiscards | read-only | mandatory | Number of received frames discarded in this interval. |
| 1.3.6.1.4.1.1996.10.12.2.1.6 | ColumncmCpeDataPortIntervalRxErrors | read-only | mandatory | Number of erred frames received on the data port in this interval. |
| 1.3.6.1.4.1.1996.10.12.2.1.7 | ColumncmCpeDataPortIntervalTxFrames | read-only | mandatory | Number of frames transmitted on the data port in this interval. |
| 1.3.6.1.4.1.1996.10.12.2.1.8 | ColumncmCpeDataPortIntervalTxOctets | read-only | mandatory | Number of octets transmitted on the data port in this interval. |
| 1.3.6.1.4.1.1996.10.12.2.1.9 | ColumncmCpeDataPortIntervalTxDiscards | read-only | mandatory | Number of transmission intended frames discarded in this interval. |
| 1.3.6.1.4.1.1996.10.12.2.1.10 | ColumncmCpeDataPortIntervalTxErrors | read-only | mandatory | Number of erred frames transmitted on the data port in this interval. |
| 1.3.6.1.4.1.1996.10.12.3 | TablecmCpeDataPortTotalTable | not-accessible | mandatory | This table provides the transmit and receive statistics for the data ports since the system was restarted. The index for this table is the PII of the system po… |
| 1.3.6.1.4.1.1996.10.12.3.1 | RowcmCpeDataPortTotalEntry | not-accessible | mandatory | Each entry in the table contains the transmit and receive statistics for a data port. The index for this table is the PII of the system port connected to one o… |
| 1.3.6.1.4.1.1996.10.12.3.1.1 | ColumncmCpeDataPortTotalIndex | read-only | mandatory | PII of the system port connected to one of the IMUX DSL ports. |
| 1.3.6.1.4.1.1996.10.12.3.1.2 | ColumncmCpeDataPortTotalRxFrames | read-only | mandatory | Total number of frames received on the data port since the system was restarted. |
| 1.3.6.1.4.1.1996.10.12.3.1.3 | ColumncmCpeDataPortTotalRxOctets | read-only | mandatory | Total number of octets received on the data port since the system was restarted. |
| 1.3.6.1.4.1.1996.10.12.3.1.4 | ColumncmCpeDataPortTotalRxDiscards | read-only | mandatory | Total number of received frames discarded on the data port since the system was restarted. |
| 1.3.6.1.4.1.1996.10.12.3.1.5 | ColumncmCpeDataPortTotalRxErrors | read-only | mandatory | Total number of erred frames received on the data port since the system was restarted. |
| 1.3.6.1.4.1.1996.10.12.3.1.6 | ColumncmCpeDataPortTotalTxFrames | read-only | mandatory | Total number of frames transmitted on the data port since the system was restarted. |
| 1.3.6.1.4.1.1996.10.12.3.1.7 | ColumncmCpeDataPortTotalTxOctets | read-only | mandatory | Total number of octets transmitted on the data port since the system was restarted. |
| 1.3.6.1.4.1.1996.10.12.3.1.8 | ColumncmCpeDataPortTotalTxDiscards | read-only | mandatory | Total number of transmission intended frames discarded on the data port since the system was restarted. |
| 1.3.6.1.4.1.1996.10.12.3.1.9 | ColumncmCpeDataPortTotalTxErrors | read-only | mandatory | Total number of erred frames transmitted on the data port since the system was restarted. |
| 1.3.6.1.4.1.1996.11 | NodecmBootFileOK | Indicates that the given boot file was downloaded to the given board successfully. If this trap has a severity of 'information,' it can potentially clear an al… | ||
| 1.3.6.1.4.1.1996.12 | NodecmAttributeChange | Indicates an attribute was changed by an operator. The text field contains the name of the changed attribute and the new value. | ||
| 1.3.6.1.4.1.1996.13 | NodecmConfigFileReadFailed | Indicates that the Config File Read operation failed. The text field contains a description of the error encountered. | ||
| 1.3.6.1.4.1.1996.14 | NodecmConfigFileReadOk | Indicates the Config File Read operation executed successfully. If this trap has a severity of 'information,' it can potentially clear an alarm in the system. … | ||
| 1.3.6.1.4.1.1996.15 | NodecmConfigFileWriteFailed | Indicates that the Config File Write operation failed. The text field contains a description of the error encountered. | ||
| 1.3.6.1.4.1.1996.16 | NodecmConfigFileWriteOk | Indicates the Config File Write operation executed successfully. If this trap has a severity of 'information,' it can potentially clear an alarm in the system.… | ||
| 1.3.6.1.4.1.1996.17 | NodecmOperStateChange | Indicates that the Operability State of a resource has changed in the system. | ||
| 1.3.6.1.4.1.1996.18 | NodecmDiagnostic | Indicates some diagnostic event occurred. The text field contains a description of the event. | ||
| 1.3.6.1.4.1.1996.19 | NodecmBoardRestart | The reason code field indicates the reason for the restart. | ||
| 1.3.6.1.4.1.1996.20 | NodecmCE200 | |||
| 1.3.6.1.4.1.1996.20 | NodecmFanFailure | Indicates that the system fan has failed. | ||
| 1.3.6.1.4.1.1996.20.1 | NodecmSystem | |||
| 1.3.6.1.4.1.1996.20.1.1 | ScalarcmSysObjectClass | read-only | mandatory | This is the Copper Mountain object class of this system. |
| 1.3.6.1.4.1.1996.20.1.2 | ScalarcmSysOperState | read-only | mandatory | This is the current operability state of this resource. |
| 1.3.6.1.4.1.1996.20.1.3 | ScalarcmSysMaster | read-only | mandatory | DEPRECATED. No longer supported. |
| 1.3.6.1.4.1.1996.20.1.4 | ScalarcmSysTrapAddress | not-accessible | obsolete | Obsoleted 4/1/99. IP Address of the SNMP Manager to which traps are sent. |
| 1.3.6.1.4.1.1996.20.1.5 | ScalarcmSysConfigFileName | read-only | mandatory | The FileName of the saved configuration file |
| 1.3.6.1.4.1.1996.20.1.6 | ScalarcmSysCommand | read-write | mandatory | Setting this object issues command for the system to execute. A GET on this object is the last operator command issued. |
| 1.3.6.1.4.1.1996.20.1.7 | ScalarcmSysCommandStatus | read-only | mandatory | This is the status of the last operator-issued command. |
| 1.3.6.1.4.1.1996.20.1.8 | ScalarcmSysVersion | read-only | mandatory | This is the system version, type major.minor |
| 1.3.6.1.4.1.1996.20.1.9 | ScalarcmSysCalendarTime | read-write | mandatory | The calendar time on the system. |
| 1.3.6.1.4.1.1996.20.1.10 | ScalarcmSysPrimaryPII | read-only | mandatory | This is the PII of the SCM acting as primary |
| 1.3.6.1.4.1.1996.20.1.11 | ScalarcmSysSecondaryPII | read-only | mandatory | This is the PII of the SCM acting as secondary |
| 1.3.6.1.4.1.1996.20.1.12 | ScalarcmSysRedundancy | read-write | mandatory | If enabled, the secondary can takeover as primary. |
| 1.3.6.1.4.1.1996.20.1.13 | ScalarcmSysConfigSynch | read-only | mandatory | Current sate of system configuration: Saved indicates configuration is saved on both the Primary and Secondary SCMs for a redundant system; and on the local SC… |
| 1.3.6.1.4.1.1996.20.1.14 | ScalarcmSysMyPII | read-only | mandatory | This is the PII of the SCM to which you are currently attached. |
| 1.3.6.1.4.1.1996.20.1.15 | ScalarcmSysShelfCount | read-only | mandatory | The number of shelves currently reporting as part of the system. |
| 1.3.6.1.4.1.1996.20.1.16 | ScalarcmSysExpIpSubNet | read-write | mandatory | The IP address will be interpreted as a class C subnetwork for internal use in the system. Addresses from the subnetwork will be used to assign each expansion … |
| 1.3.6.1.4.1.1996.20.2 | NodecmBoard | |||
| 1.3.6.1.4.1.1996.20.2.1 | TablecmBoardTable | not-accessible | mandatory | The Board Information table for Configuration and Management of Boards. |
| 1.3.6.1.4.1.1996.20.2.1.1 | RowcmBoardEntry | not-accessible | mandatory | An entry in the Board table. |
| 1.3.6.1.4.1.1996.20.2.1.1.1 | ColumncmBoardIndex | read-only | mandatory | An Unique index for the Board. |
| 1.3.6.1.4.1.1996.20.2.1.1.2 | ColumncmBoardObjectClass | read-only | mandatory | The value of this object defines the object class associated with this board. NOTE: For this object, only 'Board' and 'brd*' classes are used. |
| 1.3.6.1.4.1.1996.20.2.1.1.3 | ColumncmBoardOperState | read-only | mandatory | This gives the Operation-state of the Board. |
| 1.3.6.1.4.1.1996.20.2.1.1.4 | ColumncmBoardUpTime | read-only | mandatory | This value indicates the elapsed time since the board last powered up. |
| 1.3.6.1.4.1.1996.20.2.1.1.5 | ColumncmBoardFileName | read-only | mandatory | The name of the file downloaded to this board. |
| 1.3.6.1.4.1.1996.20.2.1.1.6 | ColumncmBoardFileDate | read-only | mandatory | The date/time that the downloaded file was built. |
| 1.3.6.1.4.1.1996.20.2.1.1.7 | ColumncmBoardHwType | read-only | mandatory | This is the system board type. |
| 1.3.6.1.4.1.1996.20.2.1.1.8 | ColumncmBoardNumPorts | read-only | mandatory | This is the number of ports on this board. |
| 1.3.6.1.4.1.1996.20.2.1.1.9 | ColumncmBoardHwVersion | read-only | mandatory | This is the hardware version of this board described in the format <major rev>.<minor rev>. For example: 1.0 |
| 1.3.6.1.4.1.1996.20.2.1.1.10 | ColumncmBoardSwVersion | read-only | mandatory | This is the software version of this board described in the format <major rev>.<minor rev>.<buildnumber>. For example, 1.0.6. |
| 1.3.6.1.4.1.1996.20.2.1.1.11 | ColumncmBoardPromVersion | read-only | mandatory | This is the PROM software version described in the format <major rev>.<minor rev>. For example: 1.0.6 |
| 1.3.6.1.4.1.1996.20.2.1.1.12 | ColumncmBoardRole | read-only | mandatory | This is the role of this board in the system. |
| 1.3.6.1.4.1.1996.20.2.1.1.13 | ColumncmBoardConfigChange | read-only | mandatory | This is the calendar time when the configuration was last changed. |
| 1.3.6.1.4.1.1996.20.2.1.1.14 | ColumncmBoardCommand | read-write | mandatory | Lists the last operational command issued (get) or it issues (sets) a command as specified above . |
| 1.3.6.1.4.1.1996.20.2.1.1.15 | ColumncmBoardSerialNumber | read-only | mandatory | This is the serial number of the board. |
| 1.3.6.1.4.1.1996.20.2.1.1.16 | ColumncmBoardClusterRole | read-only | mandatory | SCMs are either 'master' (have WAN interfaces) or 'expansion'. Redundant Bays have 1 'master' on each side (left and right). This object is marked as 'notAppli… |
| 1.3.6.1.4.1.1996.20.2.1.1.17 | ColumncmBoardInformation | read-only | mandatory | This is additional information about this particular board in the system. The contents of the field are defined by the specific type of board. |
| 1.3.6.1.4.1.1996.20.2.2 | TablecmIDSLBoardTable | not-accessible | mandatory | The addition information beyond that contained in the cmBoardTable required to configure and manage an IDSL Line Card. |
| 1.3.6.1.4.1.1996.20.2.2.1 | RowcmIDSLBoardEntry | not-accessible | mandatory | An entry in the Board table. |
| 1.3.6.1.4.1.1996.20.2.2.1.1 | ColumncmIDSLBoardIndex | read-only | mandatory | The value of this object indicates the combination of shelf, port and slot number (i.e ifIndex). |
| 1.3.6.1.4.1.1996.20.2.2.1.2 | ColumncmIDSLBoardTimingMode | read-write | mandatory | The value of this object defines the IDSL line card's timing mode as follows: internallyTimed - The IDSL line card provides an internally generated clock to al… |
| 1.3.6.1.4.1.1996.20.2.2.1.3 | ColumncmIDSLBoardTimingStatus | read-only | mandatory | The value of this object indicates how the IDSL Line Card is currently deriving timing. (See TimingMode for a description of possible timing derivation scenari… |
| 1.3.6.1.4.1.1996.20.2.2.1.4 | ColumncmIDSLBoardTimingAvailable | read-only | mandatory | This value indicates wether or not the IDSL Line Card's timing source is valid. The status values are defined as follows: yes - Indicates that this IDSL Line C… |
| 1.3.6.1.4.1.1996.20.3 | NodecmState | |||
| 1.3.6.1.4.1.1996.20.3.1 | TablecmStateTable | not-accessible | mandatory | The State Information table for the Control and Management of the State of System, Shelf, Board, Port and Link. |
| 1.3.6.1.4.1.1996.20.3.1.1 | RowcmStateEntry | not-accessible | mandatory | An entry in the DSL Port Information table. |
| 1.3.6.1.4.1.1996.20.3.1.1.1 | ColumncmStateGenericClass | read-only | mandatory | The value of this object is the generic object class of this resource. |
| 1.3.6.1.4.1.1996.20.3.1.1.2 | ColumncmStateIndex | read-only | mandatory | The value of this object identifies the specific resource in the object class. |
| 1.3.6.1.4.1.1996.20.3.1.1.3 | ColumncmStateObjClass | read-only | mandatory | The value of this object indicates the Object class of the resource. |
| 1.3.6.1.4.1.1996.20.3.1.1.4 | ColumncmStateOperState | read-only | mandatory | The value of this object indicates the current operability state of the resource. |
| 1.3.6.1.4.1.1996.20.3.1.1.5 | ColumncmStateLastChange | read-only | mandatory | This value indicates the value of uptime at last change. |
| 1.3.6.1.4.1.1996.20.4 | NodecmShelf | |||
| 1.3.6.1.4.1.1996.20.4.1 | TablecmShelfTable | not-accessible | mandatory | The shelf information table for the control and management of the state of a shelf. |
| 1.3.6.1.4.1.1996.20.4.1.1 | RowcmShelfEntry | not-accessible | mandatory | An entry in the shelf information table to contain configuration and status info specific to the shelf. |
| 1.3.6.1.4.1.1996.20.4.1.1.1 | ColumncmShelfIndex | read-only | mandatory | The value of this object identifies the unique index for the shelf. |
| 1.3.6.1.4.1.1996.20.4.1.1.2 | ColumncmShelfObjectClass | read-only | mandatory | The value of this object identifies the Object class to which this shelf belongs. The object class identifies the physical packaging of the shelf. Below is a d… |
| 1.3.6.1.4.1.1996.20.4.1.1.3 | ColumncmShelfOperability | read-only | mandatory | The value of this object identifies the current operability state of this shelf. |
| 1.3.6.1.4.1.1996.20.4.1.1.4 | ColumncmShelfUpTime | read-only | mandatory | The value of this object indicates the elapsed since shelf was last powered up. |
| 1.3.6.1.4.1.1996.20.4.1.1.5 | ColumncmShelfMaster | read-only | mandatory | The value of this object identifies the SCM board operating as the shelf master. |
| 1.3.6.1.4.1.1996.20.4.1.1.6 | ColumncmShelfBoardMap | read-only | mandatory | The value of this object is a bit map of boards in the shelf, for example bit 0 = Fan, bit 1 = slot1, bit 2 = slot 2 . |
| 1.3.6.1.4.1.1996.20.4.1.1.7 | ColumncmShelfCommand | read-write | mandatory | This object allows a single shelf to be restarted vs. restarting the entire system. |
| 1.3.6.1.4.1.1996.20.4.1.1.8 | ColumncmShelfShelfNumber | read-only | mandatory | The value of this object indicates the configured position of this shelf. If the value of this object is set to one, it is configured to be the first shelf on … |
| 1.3.6.1.4.1.1996.20.5 | NodecmFile | |||
| 1.3.6.1.4.1.1996.20.5.1 | ScalarcmFileBootDevice | read-only | mandatory | The value of this object is the type of Device that the system booted from. |
| 1.3.6.1.4.1.1996.20.5.2 | ScalarcmFileFSName | read-only | mandatory | This is the name of the file server being used as a default for file operations for this system. |
| 1.3.6.1.4.1.1996.20.5.3 | ScalarcmFileFSAddr | read-write | mandatory | IP Address of the remote file server that contains the CMN software. If the system doesn' find a requested file locally, it will attempt to load the specified … |
| 1.3.6.1.4.1.1996.20.5.4 | ScalarcmFileFSUsername | read-write | mandatory | This is the user name that will be used on all the FTP requests to the remote file server specified in cmFileFSAddr. |
| 1.3.6.1.4.1.1996.20.5.5 | ScalarcmFileFSPassword | read-write | mandatory | This is the password that will be used on all FTP requests to the remote file server specified in cmFileFSAddr. When read back, this password will alwasys disp… |
| 1.3.6.1.4.1.1996.20.5.6 | ScalarcmFileFLASHDir | read-only | mandatory | This is the root directory path on the flash file server that contains the files for this system. |
| 1.3.6.1.4.1.1996.20.5.7 | ScalarcmFileFSDir | read-write | mandatory | This is the base directory name that will be used for all requests to the remote FTP server specified in the cmFileFSAddr. An appropriate subdirectory name bas… |
| 1.3.6.1.4.1.1996.20.6 | NodecmCpeBoard | |||
| 1.3.6.1.4.1.1996.20.6.1 | TablecmCpeBoardTable | not-accessible | mandatory | Board Information table for Configuration and Management of CPE Boards. |
| 1.3.6.1.4.1.1996.20.6.1.1 | RowcmCpeBoardEntry | not-accessible | mandatory | An entry in the Board table. |
| 1.3.6.1.4.1.1996.20.6.1.1.1 | ColumncmCpeBoardIndex | read-only | mandatory | This is the PII of the CPE connected to the system. The decimal format is: fabbccdddd. Where f=1 for a CPE, a is the shelf, bb is the slot and cc is the port. … |
| 1.3.6.1.4.1.1996.20.6.1.1.2 | ColumncmCpeBoardObjectClass | read-only | mandatory | The value of this object defines the object class associated with this CPE. NOTE: For this object, only 'cr*' or 'netopia*' classes are used. |
| 1.3.6.1.4.1.1996.20.6.1.1.3 | ColumncmCpeBoardOperState | read-only | mandatory | This gives the Operability state of this CPE |
| 1.3.6.1.4.1.1996.20.6.1.1.4 | ColumncmCpeBoardUpTime | read-only | mandatory | This value indicates the elapsed time since the board last powered up. |
| 1.3.6.1.4.1.1996.20.6.1.1.5 | ColumncmCpeBoardFileName | read-only | mandatory | The name of the file downloaded to this board. |
| 1.3.6.1.4.1.1996.20.6.1.1.6 | ColumncmCpeBoardFileDate | read-only | mandatory | The date/time that the downloaded code file was built. |
| 1.3.6.1.4.1.1996.20.6.1.1.7 | ColumncmCpeBoardHwType | read-only | mandatory | This is the hardware type of this CPE. |
| 1.3.6.1.4.1.1996.20.6.1.1.8 | ColumncmCpeBoardNumPorts | read-only | mandatory | This is the number of ports on this CPE. |
| 1.3.6.1.4.1.1996.20.6.1.1.9 | ColumncmCpeBoardHwVersion | read-only | mandatory | This is the hardware version of this board described in the format <major rev>.<minor rev>. For example: 1.0 |
| 1.3.6.1.4.1.1996.20.6.1.1.10 | ColumncmCpeBoardSwVersion | read-only | mandatory | This is the software version described in the format <major rev>.<minor rev>. For example: 1.0.6 |
| 1.3.6.1.4.1.1996.20.6.1.1.11 | ColumncmCpeBoardPromVersion | read-only | mandatory | This is the PROM software version described in the format <major rev>.<minor rev>. For example: 1.0.6 |
| 1.3.6.1.4.1.1996.20.6.1.1.13 | ColumncmCpeBoardConfigChange | read-only | mandatory | This is the calendar time when the configuration on this CPE was last changed. |
| 1.3.6.1.4.1.1996.20.6.1.1.14 | ColumncmCpeBoardCommand | read-write | mandatory | Lists the last operational command issued (GET) to the CPE or it issues (SETs) a command as specified above . |
| 1.3.6.1.4.1.1996.20.6.1.1.15 | ColumncmCpeBoardSerialNumber | read-only | mandatory | This is the serial number of the CPE board. |
| 1.3.6.1.4.1.1996.20.6.1.1.16 | ColumncmCpeBoardVendorDescription | read-only | mandatory | The is a CPE supplied text string that identifies the type of CPE. This provides a way for a new CPE to be integrated with the system without requiring changes… |
| 1.3.6.1.4.1.1996.20.6.1.1.17 | ColumncmCpeBoardGroupMap | read-only | mandatory | Each octet in this string contains a Group ID that identifies a Copper Mountain database/MIB group that this CPE supports. The supported database/MIB groups re… |
| 1.3.6.1.4.1.1996.20.6.1.1.18 | ColumncmCpeBoardManagementOptions | read-only | mandatory | This is a bit mapped object that defines the management options supported by this CPE. Bit0 (LSB) - CMCP Software Download Flag. If this bit is 0, this CPE doe… |
| 1.3.6.1.4.1.1996.20.7 | NodecmHSSI | |||
| 1.3.6.1.4.1.1996.20.7.1 | TablecmHSSITable | not-accessible | mandatory | The HSSI Information table for Configuration and Management of HSSI ports. |
| 1.3.6.1.4.1.1996.20.7.1.1 | RowcmHSSIEntry | not-accessible | mandatory | An entry in the HSSI table. |
| 1.3.6.1.4.1.1996.20.7.1.1.1 | ColumncmHSSIIndex | read-only | mandatory | Unique identifier for this port described in the format <shelf>.<slot>.<port>. |
| 1.3.6.1.4.1.1996.20.7.1.1.2 | ColumncmHSSIIfIndex | read-only | mandatory | The ifIndex value of this HSSI interface. The index must be greater than or equal to 1 |
| 1.3.6.1.4.1.1996.20.7.1.1.3 | ColumncmHSSIDCEReady | read-only | mandatory | Input - indicates whether DCE is ready to transmit data. |
| 1.3.6.1.4.1.1996.20.7.1.1.4 | ColumncmHSSIDTEReady | read-only | mandatory | Output - indicates whether DTE is ready to transmit data. |
| 1.3.6.1.4.1.1996.20.7.1.1.5 | ColumncmHSSIDTEDCE | read-only | mandatory | Specifies the interface type of the port as DTE or DCE. |
| 1.3.6.1.4.1.1996.20.7.1.1.6 | ColumncmHSSILoopback | read-only | mandatory | Indicates the current loopback state of the DTE. |
| 1.3.6.1.4.1.1996.20.7.1.1.7 | ColumncmHSSITestmode | read-only | mandatory | Indicates the current loopback state of the DCE. |
| 1.3.6.1.4.1.1996.20.7.1.1.8 | ColumncmHSSISync | read-only | mandatory | Indicated the presence(sync-on) or absence (sync-off) of HDLC flags. |
| 1.3.6.1.4.1.1996.20.7.1.1.9 | ColumncmHSSITxClockPresent | read-only | mandatory | Indicates whether the transmit clock is detected. |
| 1.3.6.1.4.1.1996.20.7.1.1.10 | ColumncmHSSICRC | read-write | mandatory | The CRC format used on all frames received and transmitted by the HSSI-WAN module. Currently the HSSI-WAN module only supports CRC-16. |
| 1.3.6.1.4.1.1996.20.7.1.1.11 | ColumncmHSSIClockRate | read-write | mandatory | The clock rate of port in bits per second (bps). The value of this object is supplied to this port by the connected equipment. The value of this object can onl… |
| 1.3.6.1.4.1.1996.20.7.1.1.12 | ColumncmHSSIAdminState | read-only | mandatory | The administrative state of the HSSI port |
| 1.3.6.1.4.1.1996.20.7.1.1.13 | ColumncmHSSIOperState | read-only | mandatory | The operational state of the HSSI port |
| 1.3.6.1.4.1.1996.20.8 | NodecmV35 | |||
| 1.3.6.1.4.1.1996.20.8.1 | TablecmV35Table | not-accessible | mandatory | The V.35 Information table for Configuration and Management of V.35 ports. |
| 1.3.6.1.4.1.1996.20.8.1.1 | RowcmV35Entry | not-accessible | mandatory | An entry in the V.35 table. |
| 1.3.6.1.4.1.1996.20.8.1.1.1 | ColumncmV35Index | read-only | mandatory | Unique identifier for this port described in the format <shelf>.<slot>.<port>. |
| 1.3.6.1.4.1.1996.20.8.1.1.2 | ColumncmV35IfIndex | read-only | mandatory | The ifIndex associated with this port. |
| 1.3.6.1.4.1.1996.20.8.1.1.3 | ColumncmV35DSR | read-only | mandatory | Indicates the current state of the DSR input signal |
| 1.3.6.1.4.1.1996.20.8.1.1.4 | ColumncmV35DCD | read-only | mandatory | Indicates the current state of the DTE input signal. |
| 1.3.6.1.4.1.1996.20.8.1.1.5 | ColumncmV35CTS | read-only | mandatory | Indicates the current state of the CTS input signal. |
| 1.3.6.1.4.1.1996.20.8.1.1.6 | ColumncmV35DTR | read-only | mandatory | Indicates the current state of the DTR output signal. |
| 1.3.6.1.4.1.1996.20.8.1.1.7 | ColumncmV35RTS | read-only | mandatory | Indicates the current state of the RTS output signal. |
| 1.3.6.1.4.1.1996.20.8.1.1.8 | ColumncmV35DTEDCE | read-only | mandatory | Indicates whether the port is operating as a DCE or a DTE. |
| 1.3.6.1.4.1.1996.20.8.1.1.9 | ColumncmV35Sync | read-only | mandatory | If on, indicates the presence of HLDC flags on the physical link. |
| 1.3.6.1.4.1.1996.20.8.1.1.10 | ColumncmV35TxClockSource | read-only | mandatory | Indicates the whether the transmit clock source is internal or external port. |
| 1.3.6.1.4.1.1996.20.8.1.1.11 | ColumncmV35CRC | read-write | mandatory | Indicates the type of Cyclical Redundancy Check (CRC) format used on the transmitted from this port. |
| 1.3.6.1.4.1.1996.20.8.1.1.12 | ColumncmV35ClockRate | read-only | mandatory | The clock rate of port in bits per second (bps). Example: 1544000 |
| 1.3.6.1.4.1.1996.20.8.1.1.13 | ColumncmV35AdminState | read-only | mandatory | The administrative state of the V.35 port |
| 1.3.6.1.4.1.1996.20.8.1.1.14 | ColumncmV35OperState | read-only | mandatory | The operational state of the V.35 port |
| 1.3.6.1.4.1.1996.20.9 | NodecmTrap | |||
| 1.3.6.1.4.1.1996.20.9.1 | ScalarcmTrapEventSeqNum | read-only | mandatory | This object specifies the sequence number of the most recent event. |
| 1.3.6.1.4.1.1996.20.9.2 | ScalarcmTrapCriticalAlarmCount | read-only | mandatory | This object specifies the number of uncleared critical alarms. |
| 1.3.6.1.4.1.1996.20.9.3 | ScalarcmTrapMajorAlarmCount | read-only | mandatory | This object specifies the number of uncleared major alarms. |
| 1.3.6.1.4.1.1996.20.9.4 | ScalarcmTrapMinorAlarmCount | read-only | mandatory | This object specifies the number of uncleared minor alarms. |
| 1.3.6.1.4.1.1996.20.9.5 | ScalarcmTrapWarningCount | read-only | mandatory | This object specifies the number of uncleared warnings. |
| 1.3.6.1.4.1.1996.20.9.6 | TablecmTrapReceiverTable | not-accessible | obsolete | Obsoleted 4/1/99. This table contains the address and security information for all SNMP managers that are configured to received traps from the system. |
| 1.3.6.1.4.1.1996.20.9.6.1 | RowcmTrapReceiverEntry | not-accessible | obsolete | Obsoleted 4/1/99. An entry in the trap receiver table. |
| 1.3.6.1.4.1.1996.20.9.6.1.1 | ColumncmTrapReceiverIPAddr | not-accessible | obsolete | Obsoleted 4/1/99. The value of this object specifies the IP Address of the manager that is to receive traps |
| 1.3.6.1.4.1.1996.20.9.6.1.2 | ColumncmTrapReceiverPort | not-accessible | obsolete | Obsoleted 4/1/99. This object specifies the IP port number of the manager that is to receive traps. |
| 1.3.6.1.4.1.1996.20.9.6.1.3 | ColumncmTrapReceiverCommunity | not-accessible | obsolete | Obsoleted 4/1/99. This object specifies the community string for the manager that is to receive traps. |
| 1.3.6.1.4.1.1996.20.9.6.1.4 | ColumncmTrapReceiverRowStatus | not-accessible | obsolete | Obsoleted 4/1/99. This object controls the creation and deletion of a row in the trap receiver table. |
| 1.3.6.1.4.1.1996.20.9.6.1.5 | ColumncmTrapReceiverOwnerString | not-accessible | obsolete | Obsoleted 4/1/99. The object specifies additional textual information used to identify and describe the manager that is to receive traps. |
| 1.3.6.1.4.1.1996.20.9.7 | TablecmTrapEventLogTable | not-accessible | mandatory | This table contains the 1000 most recent events. |
| 1.3.6.1.4.1.1996.20.9.7.1 | RowcmTrapEventLogEntry | not-accessible | mandatory | An entry in the event log table. |
| 1.3.6.1.4.1.1996.20.9.7.1.1 | ColumncmTrapEventLogSeqNum | read-only | mandatory | The sequence number of this entry in the event table. |
| 1.3.6.1.4.1.1996.20.9.7.1.2 | ColumncmTrapEventLogType | read-only | mandatory | This object specifies the type of event. |
| 1.3.6.1.4.1.1996.20.9.7.1.3 | ColumncmTrapEventLogObjectClass | read-only | mandatory | The value of this field indicates the system Object Class associated with the resource reporting the event. |
| 1.3.6.1.4.1.1996.20.9.7.1.4 | ColumncmTrapEventLogClassId | read-only | mandatory | This object specifies the object class that generated the event. |
| 1.3.6.1.4.1.1996.20.9.7.1.5 | ColumncmTrapEventLogProbableCause | read-only | mandatory | This object specifies the probable cause of the event. |
| 1.3.6.1.4.1.1996.20.9.7.1.6 | ColumncmTrapEventLogSeverity | read-only | mandatory | The value of this field indicates the severity assigned to this event by the system. |
| 1.3.6.1.4.1.1996.20.9.7.1.7 | ColumncmTrapEventLogTimeTag | read-only | mandatory | This object specifies the time that the event occurred. |
| 1.3.6.1.4.1.1996.20.9.7.1.8 | ColumncmTrapEventLogText | read-only | mandatory | This object contains any additional information need to describe the event. |
| 1.3.6.1.4.1.1996.20.9.8 | TablecmTrapAlarmLogTable | not-accessible | mandatory | This table contains the 1000 most recent outstanding alarms. |
| 1.3.6.1.4.1.1996.20.9.8.1 | RowcmTrapAlarmLogEntry | not-accessible | mandatory | An entry in the alarm log table. |
| 1.3.6.1.4.1.1996.20.9.8.1.1 | ColumncmTrapAlarmLogSeqNum | read-only | mandatory | The sequence number of this entry in the alarm table. |
| 1.3.6.1.4.1.1996.20.9.8.1.2 | ColumncmTrapAlarmLogType | read-only | mandatory | This object specifies the type of alarm. |
| 1.3.6.1.4.1.1996.20.9.8.1.3 | ColumncmTrapAlarmLogObjectClass | read-only | mandatory | The value of this field indicates the system Object Class associated with the resource reporting the event. |
| 1.3.6.1.4.1.1996.20.9.8.1.4 | ColumncmTrapAlarmLogClassId | read-only | mandatory | This object specifies the object class that generated the alarm. |
| 1.3.6.1.4.1.1996.20.9.8.1.5 | ColumncmTrapAlarmLogProbableCause | read-only | mandatory | This object specifies the probable cause of the alarm. |
| 1.3.6.1.4.1.1996.20.9.8.1.6 | ColumncmTrapAlarmLogSeverity | read-write | mandatory | The value of this field indicates the severity assigned to this event by the system. |
| 1.3.6.1.4.1.1996.20.9.8.1.7 | ColumncmTrapAlarmLogTimeTag | read-only | mandatory | This object specifies the time that the alarm occurred. |
| 1.3.6.1.4.1.1996.20.9.8.1.8 | ColumncmTrapAlarmLogText | read-only | mandatory | This object contains any additional information need to describe the event. |
| 1.3.6.1.4.1.1996.20.9.9 | TablecmTrapTypeLogTable | not-accessible | mandatory | This table contains the 1000 most recent events sorted first by internal event type, and second by sequence number. |
| 1.3.6.1.4.1.1996.20.9.9.1 | RowcmTrapTypeLogEntry | not-accessible | mandatory | An entry in the Trap Type log table. |
| 1.3.6.1.4.1.1996.20.9.9.1.1 | ColumncmTrapTypeLogType | read-only | mandatory | This object specifies the type of event. |
| 1.3.6.1.4.1.1996.20.9.9.1.2 | ColumncmTrapTypeLogSeqNum | read-only | mandatory | The sequence number of this entry in the event table. |
| 1.3.6.1.4.1.1996.20.9.9.1.3 | ColumncmTrapTypeLogObjectClass | read-only | mandatory | The value of this field indicates the system Object Class associated with the resource reporting the event. |
| 1.3.6.1.4.1.1996.20.9.9.1.4 | ColumncmTrapTypeLogClassId | read-only | mandatory | This object specifies the object class that generated the event. |
| 1.3.6.1.4.1.1996.20.9.9.1.5 | ColumncmTrapTypeLogProbableCause | read-only | mandatory | This object specifies the probable cause of the event. |
| 1.3.6.1.4.1.1996.20.9.9.1.6 | ColumncmTrapTypeLogSeverity | read-only | mandatory | The value of this field indicates the severity assigned to this event by the system. |
| 1.3.6.1.4.1.1996.20.9.9.1.7 | ColumncmTrapTypeLogTimeTag | read-only | mandatory | This object specifies the time that the event occurred. |
| 1.3.6.1.4.1.1996.20.9.9.1.8 | ColumncmTrapTypeLogText | read-only | mandatory | This object contains any additional information need to describe the event. |
| 1.3.6.1.4.1.1996.20.9.10 | TablecmTrapDestinationTable | not-accessible | mandatory | This table is used by operators to configure the system to send traps to a particular management station. In our current implementation, the system sends all t… |
| 1.3.6.1.4.1.1996.20.9.10.1 | RowcmTrapDestinationEntry | not-accessible | mandatory | An entry in the Trap Destination table. |
| 1.3.6.1.4.1.1996.20.9.10.1.1 | ColumncmTrapDestinationIpAddr | read-only | mandatory | This is the IP Address that the system will use when sending traps to this receiver. This is the first index into this table. |
| 1.3.6.1.4.1.1996.20.9.10.1.2 | ColumncmTrapDestinationPort | read-only | mandatory | This is the IP Port that this system will use when sending traps to this receiver. The standard SNMP Trap port is 162. This is the second index into this table. |
| 1.3.6.1.4.1.1996.20.9.10.1.3 | ColumncmTrapDestinationCommunity | read-write | mandatory | This is the community name to put into trap messages to this trap receiver. Default: '' |
| 1.3.6.1.4.1.1996.20.9.10.1.4 | ColumncmTrapDestinationRowStatus | read-write | mandatory | This is a field that controls the creation/deletion of entries in this table. Rows can be created by setting the RowStatus to Active or NotInService. The resul… |
| 1.3.6.1.4.1.1996.20.9.10.1.5 | ColumncmTrapDestinationOwnerString | read-write | mandatory | The object specifies additional textual information used to identify and describe the manager that is to receive traps. Default: '' |
| 1.3.6.1.4.1.1996.20.10 | NodecmLoop | |||
| 1.3.6.1.4.1.1996.20.10.1 | ScalarcmLoopID | read-only | mandatory | This is the unique identifier for the loopback test to be performed. |
| 1.3.6.1.4.1.1996.20.10.2 | ScalarcmLoopInterface | read-write | mandatory | The value of this object identifies the interface to test. The interface is identified by the shelf, slot, port and user channel. |
| 1.3.6.1.4.1.1996.20.10.3 | ScalarcmLoopType | read-write | mandatory | This is the type of loopback test to performed. |
| 1.3.6.1.4.1.1996.20.10.4 | ScalarcmLoopAction | read-write | mandatory | The action to perform on the loopback test. |
| 1.3.6.1.4.1.1996.20.10.5 | ScalarcmLoopDuration | read-write | mandatory | The number of seconds to allow the loopback test to run. |
| 1.3.6.1.4.1.1996.20.10.6 | ScalarcmLoopStatus | read-only | mandatory | The status of the loopback test in progress. |
| 1.3.6.1.4.1.1996.20.10.7 | ScalarcmLoopTimeElapsed | read-only | mandatory | This is the number of seconds that have elapsed since the loopback test was started. |
| 1.3.6.1.4.1.1996.20.10.8 | ScalarcmLoopTermCode | read-only | mandatory | This is the test termination code. It specifies why the loopback test was terminated. |
| 1.3.6.1.4.1.1996.20.10.9 | ScalarcmLoopTxCount | read-only | mandatory | The number of packets transmitted during the test. |
| 1.3.6.1.4.1.1996.20.10.10 | ScalarcmLoopRxErrors | read-only | mandatory | The number of errored packets received during the test. |
| 1.3.6.1.4.1.1996.20.10.11 | ScalarcmLoopOwnerString | read-write | mandatory | This string identifies the operator controlling the test. |
| 1.3.6.1.4.1.1996.20.10.12 | TablecmLoopHistTable | not-accessible | mandatory | This table is used to store the history records from the previous loopback tests. A maximum of history 10 records are stored. |
| 1.3.6.1.4.1.1996.20.10.12.1 | RowcmLoopHistEntry | not-accessible | mandatory | An entry in the loopback test history table. |
| 1.3.6.1.4.1.1996.20.10.12.1.1 | ColumncmLoopHistID | read-only | mandatory | This is the unique identifier for the loopback test that was performed. |
| 1.3.6.1.4.1.1996.20.10.12.1.2 | ColumncmLoopHistInterface | read-only | mandatory | The value of this object identifies the interface that was tested. The interface is identified by the shelf, slot, port and user channel. |
| 1.3.6.1.4.1.1996.20.10.12.1.3 | ColumncmLoopHistType | read-only | mandatory | This is the type of loopback test that was performed. |
| 1.3.6.1.4.1.1996.20.10.12.1.4 | ColumncmLoopHistAction | read-only | mandatory | The last action that was performed on the loopback test. |
| 1.3.6.1.4.1.1996.20.10.12.1.5 | ColumncmLoopHistDuration | read-only | mandatory | The number of seconds that the loopback test was allowed to run. |
| 1.3.6.1.4.1.1996.20.10.12.1.6 | ColumncmLoopHistStatus | read-only | mandatory | The status of the loopback test. |
| 1.3.6.1.4.1.1996.20.10.12.1.7 | ColumncmLoopHistTimeElapsed | read-only | mandatory | This is the number of seconds that elapsed for the duration of the loopback test. |
| 1.3.6.1.4.1.1996.20.10.12.1.8 | ColumncmLoopHistTermCode | read-only | mandatory | This is the test termination code. It specifies why the loopback test was terminated. |
| 1.3.6.1.4.1.1996.20.10.12.1.9 | ColumncmLoopHistTxCount | read-only | mandatory | The number of packets transmitted during the test. |
| 1.3.6.1.4.1.1996.20.10.12.1.10 | ColumncmLoopHistRxErrors | read-only | mandatory | The number of errored packets received during the test. |
| 1.3.6.1.4.1.1996.20.10.12.1.11 | ColumncmLoopHistOwnerString | read-only | mandatory | This string identifies the operator that controlled the test. |
| 1.3.6.1.4.1.1996.20.10.12.1.12 | ColumncmLoopHistTestParameter1 | read-only | mandatory | The value of this object is test type dependent. For the EOC loopback test type, it specifies the address of the network element to loop back to the system. Va… |
| 1.3.6.1.4.1.1996.20.10.12.1.13 | ColumncmLoopHistErrorInfo | read-only | mandatory | The value of this object is card dependent. It is a method to specify more additional error status to the operator. |
| 1.3.6.1.4.1.1996.20.10.13 | ScalarcmLoopTestParameter1 | read-write | mandatory | The value of this object is test type dependent. For the EOC loopback test type, it specifies the address of the network element to loop back to the system. Va… |
| 1.3.6.1.4.1.1996.20.10.14 | ScalarcmLoopErrorInfo | read-only | mandatory | The value of this object is card dependent. It is a method to specify more additional error status to the operator. |
| 1.3.6.1.4.1.1996.20.11 | NodecmVBridge | |||
| 1.3.6.1.4.1.1996.20.11.1 | TablecmVBridgeTable | not-accessible | mandatory | The virtual bridge table. |
| 1.3.6.1.4.1.1996.20.11.1.1 | RowcmVBridgeEntry | not-accessible | mandatory | An entry in the cmVBridge table. |
| 1.3.6.1.4.1.1996.20.11.1.1.1 | ColumncmVBridgePII | read-only | mandatory | The value of this object identifies the network interface from the shelf, slot, port and user channel. PII stands for Permanent Interface Identifier. |
| 1.3.6.1.4.1.1996.20.11.1.1.2 | ColumncmVBridgeNMAC | read-only | mandatory | The number of MAC entries in the bridge. |
| 1.3.6.1.4.1.1996.20.11.1.1.3 | ColumncmVBridgeNMulticast | read-only | mandatory | The number of multicast frames from the MIO or Ethernet. |
| 1.3.6.1.4.1.1996.20.11.1.1.4 | ColumncmVBridgeNUnicast | read-only | mandatory | The number of unicast frames from the MIO or Ethernet. |
| 1.3.6.1.4.1.1996.20.11.1.1.5 | ColumncmVBridgeNDSL | read-only | mandatory | The number of frames from DSL. |
| 1.3.6.1.4.1.1996.20.11.1.1.6 | ColumncmVBridgeNUnknownDest | read-only | mandatory | The number of unnown destinations that have been dropped. |
| 1.3.6.1.4.1.1996.20.11.1.1.7 | ColumncmVBridgeNOverflow | read-only | mandatory | The number of unlearned MACs (table full). |
| 1.3.6.1.4.1.1996.20.11.1.1.8 | ColumncmVBridgeOption | read-write | mandatory | Optional bridge function. |
| 1.3.6.1.4.1.1996.20.12 | NodecmMAC | |||
| 1.3.6.1.4.1.1996.20.12.1 | TablecmMACTable | not-accessible | mandatory | This table displays the learned host Ethernet MAC addresses for each VWAN-bridge group. |
| 1.3.6.1.4.1.1996.20.12.1.1 | RowcmMACEntry | not-accessible | mandatory | An entry in the CM MAC table. |
| 1.3.6.1.4.1.1996.20.12.1.1.1 | ColumncmMACPII | read-only | mandatory | VWAN-bridge Group Identifier. This is the PII for the WAN VC uplink of the Group. |
| 1.3.6.1.4.1.1996.20.12.1.1.2 | ColumncmMACIndex | read-only | mandatory | Arbitrary index within a Bridge Group for this entry in the MAC table. |
| 1.3.6.1.4.1.1996.20.12.1.1.3 | ColumncmMACMAC | read-only | mandatory | MAC address of this host's Ethernet interface. |
| 1.3.6.1.4.1.1996.20.12.1.1.4 | ColumncmMACTTL | read-only | mandatory | Minutes to live before aging out. |
| 1.3.6.1.4.1.1996.20.12.1.1.5 | ColumncmMACDslPII | read-only | mandatory | PII of this host's DSL interface. |
| 1.3.6.1.4.1.1996.20.13 | NodecmAlarm | |||
| 1.3.6.1.4.1.1996.20.13.1 | TablecmAlarmTable | not-accessible | mandatory | A list of alarm entries. |
| 1.3.6.1.4.1.1996.20.13.1.1 | RowcmAlarmEntry | not-accessible | mandatory | A list of parameters that set up a periodic checking for alarm conditions. For example, an instance of the alarmValue object might be named alarmValue.8 |
| 1.3.6.1.4.1.1996.20.13.1.1.1 | ColumncmAlarmIndex | read-only | mandatory | An index that uniquely identifies an entry in the alarm table. Each such entry defines a diagnostic sample at a particular interval for an object on the device. |
| 1.3.6.1.4.1.1996.20.13.1.1.2 | ColumncmAlarmInterval | read-only | mandatory | The interval in seconds over which the data is sampled and compared with the rising and falling thresholds. |
| 1.3.6.1.4.1.1996.20.13.1.1.3 | ColumncmAlarmVariable | read-write | mandatory | The object identifier of the particular variable to be sampled. Only variables that resolve to an ASN.1 primitive type of INTEGER (INTEGER, Counter, Gauge, or … |
| 1.3.6.1.4.1.1996.20.13.1.1.4 | ColumncmAlarmSampleType | read-only | mandatory | The method of sampling the selected variable and calculating the value to be compared against the thresholds. If the value of this object is absoluteValue(1), … |
| 1.3.6.1.4.1.1996.20.13.1.1.5 | ColumncmAlarmValue | read-only | mandatory | The value of the statistic during the last sampling period. This is the value that is compared with the rising thresholds. The value during the current samplin… |
| 1.3.6.1.4.1.1996.20.13.1.1.6 | ColumncmAlarmStartupAlarm | read-only | mandatory | The alarm that may be sent when this entry is first set to valid. If the first sample after this entry becomes valid is greater than or equal to the risingThre… |
| 1.3.6.1.4.1.1996.20.13.1.1.7 | ColumncmAlarmRisingThreshold | read-write | mandatory | A threshold for the sampled statistic. When the current sampled value is greater than or equal to this threshold, and the value at the last sampling interval w… |
| 1.3.6.1.4.1.1996.20.13.1.1.8 | ColumncmAlarmFallingThreshold | read-write | mandatory | A threshold for the sampled statistic. When the current sampled value is less than or equal to this threshold, and the value at the last sampling interval was … |
| 1.3.6.1.4.1.1996.20.13.1.1.12 | ColumncmAlarmStatus | read-write | mandatory | The status of this alarm entry. |
| 1.3.6.1.4.1.1996.20.13.2 | ScalarcmAlarmSwitch | read-write | mandatory | The value of this object indicates whether the monitoring of threshold crossing alerts is enabled or disabled. |
| 1.3.6.1.4.1.1996.20.13.3 | ScalarcmAlarmSamplingInterval | read-write | mandatory | The value of this object specfies the sampling interval, in minutes, for performance metrics collection in the cmDslIntervalTable, dsx3IntervalTable, and dsx3F… |
| 1.3.6.1.4.1.1996.20.14 | NodecmEvent | |||
| 1.3.6.1.4.1.1996.20.15 | NodecmUserGroup | |||
| 1.3.6.1.4.1.1996.20.15.1 | TablecmNameTable | not-accessible | mandatory | This is a multi-indexed table that stores the protocol interface name and corresponding PII for all protocol interfaces in the system. Typically a network oper… |
| 1.3.6.1.4.1.1996.20.15.1.1 | RowcmNameEntry | not-accessible | mandatory | An entry in the cmName table. |
| 1.3.6.1.4.1.1996.20.15.1.1.1 | ColumncmNameIfName | read-only | mandatory | The value of this object identifies the name of the virtual circuit. The cmNameIfName is set in the cmSubIfaceTable. |
| 1.3.6.1.4.1.1996.20.15.1.1.2 | ColumncmNamePII | read-only | mandatory | The value of this object identifies the network interface from the shelf, slot, port and user channel. PII stands for Permanent Interface Identifier. |
| 1.3.6.1.4.1.1996.20.15.2 | TablecmGroupTable | not-accessible | mandatory | Grouping allows carrier to associate their end user customers with a particular group. The 'grouping feature' is implemented in the cmGroupTable and the cmMemb… |
| 1.3.6.1.4.1.1996.20.15.2.1 | RowcmGroupEntry | not-accessible | mandatory | An entry in the cmGroup table. |
| 1.3.6.1.4.1.1996.20.15.2.1.1 | ColumncmGroupName | read-only | mandatory | The value of this object displays the customer assigned name of a group. Note that the name of a group can be changed using cmGroupNewGrpName |
| 1.3.6.1.4.1.1996.20.15.2.1.2 | ColumncmGroupNewGrpName | read-write | mandatory | The object is used to rename a user group. The value of this object is the new user group name. Setting this object will change the name of the user group in t… |
| 1.3.6.1.4.1.1996.20.15.2.1.3 | ColumncmGroupRowStatus | read-write | mandatory | This object is the rowStatus of the group. A group is enabled by setting this object to 'active'. An entry in this table is created by setting this object to '… |
| 1.3.6.1.4.1.1996.20.15.3 | TablecmMemberTable | not-accessible | mandatory | Grouping allows a carrier to associate their end user customers with a particular group. The 'grouping feature' is implemented in the cmGroupTable and the cmMe… |
| 1.3.6.1.4.1.1996.20.15.3.1 | RowcmMemberEntry | not-accessible | mandatory | An entry in the cmMemberTable. |
| 1.3.6.1.4.1.1996.20.15.3.1.1 | ColumncmMemberGrpName | read-only | mandatory | The value of this object identifies the name of the user group to which this member belongs. Note that this user group must exist in the cmGroupTable before an… |
| 1.3.6.1.4.1.1996.20.15.3.1.2 | ColumncmMemberPII | read-only | mandatory | The value of this object identifies the network interface from the shelf, slot, port and user channel. PII stands for Permanent Interface Identifier . |
| 1.3.6.1.4.1.1996.20.15.3.1.3 | ColumncmMemberRowStatus | read-write | mandatory | This object is the rowStatus of the member. A member is enabled by setting this object to 'active'. An entry in this table is created by setting this object to… |
| 1.3.6.1.4.1.1996.20.16 | NodecmMaint | |||
| 1.3.6.1.4.1.1996.20.16.1 | TablecmMaintCmdTable | not-accessible | mandatory | This table allows the operator to configure the Automatic and Manual collection of Bulk Statistics and the recurring Config Backup. There will be one entry in … |
| 1.3.6.1.4.1.1996.20.16.1.1 | RowcmMaintCmdEntry | not-accessible | mandatory | A list of parameters that are associated with a given maintenance command in the system. |
| 1.3.6.1.4.1.1996.20.16.1.1.1 | ColumncmMaintCmdCommand | read-only | mandatory | This is the command being configured. This is also the index into the table. |
| 1.3.6.1.4.1.1996.20.16.1.1.2 | ColumncmMaintCmdRowStatus | read-write | mandatory | This object is used to add and delete entries from this table. All values are writable, but only 'active' and 'notInService' are readable. An operator uses 'cr… |
| 1.3.6.1.4.1.1996.20.16.1.1.3 | ColumncmMaintCmdStartTime | read-write | mandatory | This is the start time that applies to the command. If the command is 'statsAuto' or 'statsManual' the StartTime reflects the timestamp of the first data conta… |
| 1.3.6.1.4.1.1996.20.16.1.1.4 | ColumncmMaintCmdRecurrence | read-write | mandatory | For automatic commands (such as 'configBackup' and 'statsAuto'), this is the number of hours between each execution of the command. For the 'configBackup' comm… |
| 1.3.6.1.4.1.1996.20.16.1.1.5 | ColumncmMaintCmdReportingPeriod | read-write | mandatory | The ReportingPeriod defines the valid range (number of hours) of data in the uploaded file. For the 'configBackup' and bulkCPEDownload' commands, sets to this … |
| 1.3.6.1.4.1.1996.20.16.1.1.6 | ColumncmMaintCmdPrimaryIpAddr | read-write | mandatory | This is the IpAddress of the primary file server to use in executing the command. If an address of all 0's is entered, no save will be attempted to the primary… |
| 1.3.6.1.4.1.1996.20.16.1.1.7 | ColumncmMaintCmdSecondaryIpAddr | read-write | mandatory | This is the IpAddress of the secondary file server to use in executing the command. If an address of all 0's is entered, no save will be attempted to the secon… |
| 1.3.6.1.4.1.1996.20.16.1.1.8 | ColumncmMaintCmdDirectory | read-write | mandatory | This is the directory on the file server where uploaded files will be stored on both the primary and secondary file servers. For 'bulkCPEDownload', the value o… |
| 1.3.6.1.4.1.1996.20.16.1.1.9 | ColumncmMaintCmdBaseFileName | read-write | mandatory | This is the base file name that the system will use when generating the statistics file for both the 'statsAuto' and 'statsManual' commands. In either case, th… |
| 1.3.6.1.4.1.1996.20.16.1.1.10 | ColumncmMaintCmdUserName | read-write | mandatory | This is the name that the system will use when initiating an FTP session with the file server (this applies to both the primary and secondary file servers). Fo… |
| 1.3.6.1.4.1.1996.20.16.1.1.11 | ColumncmMaintCmdPassword | read-write | mandatory | This is the password that the system will use when initiating an FTP session with the file server (this applies to both the primary and secondary file servers)… |
| 1.3.6.1.4.1.1996.20.16.1.1.12 | ColumncmMaintCmdPreviousTime | read-only | mandatory | This is the calendar time at the beginning of the last attempted execution. If this operation has not been attempted since powerup, this field displays an empt… |
| 1.3.6.1.4.1.1996.20.16.1.1.13 | ColumncmMaintCmdNextTime | read-only | mandatory | This is the calendar time when this automatic operation will next be attempted. If this is not an automatic operation, or this operation is not 'active', this … |
| 1.3.6.1.4.1.1996.20.16.1.1.14 | ColumncmMaintCmdCommandStatus | read-only | mandatory | This object indicates the status of the last command. 'none' indicates no command has been executed since startup. 'savedToPrimary' indicates the last upload s… |
| 1.3.6.1.4.1.1996.20.16.1.1.15 | ColumncmMaintCmdStatusText | read-only | mandatory | The object contains a more detailed status that can be filled in by the system to provide more information to the operator. This status may be updated while a … |
| 1.3.6.1.4.1.1996.20.16.2 | ScalarcmMaintStatsDelimiter | read-write | mandatory | This is the delimiter that is added between each column in the uploaded data file. This is any standard ASCII character. Default: '|' |
| 1.3.6.1.4.1.1996.20.17 | NodecmProxyArp | |||
| 1.3.6.1.4.1.1996.20.17.1 | TablecmProxyArpTable | not-accessible | mandatory | This table provides information about the Proxy Arp status of each DSL port in the system. |
| 1.3.6.1.4.1.1996.20.17.1.1 | RowcmProxyArpEntry | not-accessible | mandatory | The Proxy Arp status associated with a given DSL Port. |
| 1.3.6.1.4.1.1996.20.17.1.1.1 | ColumncmProxyArpPII | read-only | mandatory | This is the PII of the DSL port. This is also the index into the table. |
| 1.3.6.1.4.1.1996.20.17.1.1.2 | ColumncmProxyArpRowStatus | read-write | mandatory | This object is used to activate/deactivate the proxy arp function for the given DSL port. Proxy Arp is valid only for a port configured in one of the IP netmod… |
| 1.3.6.1.4.1.1996.20.18 | NodecmMultiShelf | |||
| 1.3.6.1.4.1.1996.20.18.1 | TablecmTrunkIfTable | not-accessible | mandatory | This table contains all the inter-shelf trunk interfaces. Each inter-shelf trunk interface is represented by its PII. |
| 1.3.6.1.4.1.1996.20.18.1.1 | RowcmTrunkIfEntry | not-accessible | mandatory | Each entry in this table represents an interface or an end-point of the inter- shelf trunk. |
| 1.3.6.1.4.1.1996.20.18.1.1.1 | ColumncmTrunkIfIndex | read-only | mandatory | This value is used to index the table. The shelf.slot.port portions of the PII are required to traverse the table. The index will address a particular ethernet… |
| 1.3.6.1.4.1.1996.20.18.1.1.2 | ColumncmTrunkIfOperState | read-only | mandatory | Operational state of this ethernet port. |
| 1.3.6.1.4.1.1996.20.18.1.1.3 | ColumncmTrunkIfAdminState | read-write | mandatory | This allows the operator to enable and disable a particular ethernet port. The operational state of the port can be determined by accessing the cmTrunkIfOperSt… |
| 1.3.6.1.4.1.1996.20.18.1.1.4 | ColumncmTrunkIfSentPackets | read-only | mandatory | Number of transmitted packets from a particular ethernet port on a SCM. |
| 1.3.6.1.4.1.1996.20.18.1.1.5 | ColumncmTrunkIfSentError | read-only | mandatory | Number of errors detected when sending packets from a particular ethernet port on a SCM. |
| 1.3.6.1.4.1.1996.20.18.1.1.6 | ColumncmTrunkIfRecvPackets | read-only | mandatory | Number of packets received from a particular ethernet port on a SCM. |
| 1.3.6.1.4.1.1996.20.18.1.1.7 | ColumncmTrunkIfRecvError | read-only | mandatory | Number of errors detected while receiving packets from a particular ethernet port on a SCM. |
| 1.3.6.1.4.1.1996.20.18.2 | TablecmTrunkConnectionTable | not-accessible | mandatory | This table contains the inter-shelf trunks. Each trunk connects 2 shelves using their inter-shelf trunk interface. The trunk provides control and data path for… |
| 1.3.6.1.4.1.1996.20.18.2.1 | RowcmTrunkConnectionEntry | not-accessible | mandatory | Each entry in this table represents a link used to pass control and data between the master shelf and the expansion shelf. |
| 1.3.6.1.4.1.1996.20.18.2.1.1 | ColumncmTrunkConnectionTrunkMaster | read-only | mandatory | This value is used as an index into the table. The shelf.board portions of the PII value are used to specify a particular SCM who is the master of the primary … |
| 1.3.6.1.4.1.1996.20.18.2.1.2 | ColumncmTrunkConnectionIndex | read-only | mandatory | This value is the second index to the table. When used with the master SCM PII index, cmTrunkConnectionTrunkMaster, it will identify one of the inter-shelf tru… |
| 1.3.6.1.4.1.1996.20.18.2.1.3 | ColumncmTrunkConnectionOperState | read-only | mandatory | Operational state of this IST. |
| 1.3.6.1.4.1.1996.20.18.2.1.4 | ColumncmTrunkConnectionLowPII | read-only | mandatory | Lower PII of the two ports connected by this trunk. The term lower in this context refers to the shelf value of the PII. |
| 1.3.6.1.4.1.1996.20.18.2.1.5 | ColumncmTrunkConnectionHighPII | read-only | mandatory | Higher PII of the two ports connected by this trunk. The term higher in this context refers to the shelf value of the PII. |
| 1.3.6.1.4.1.1996.20.18.3 | TablecmTrunkTopoTable | not-accessible | mandatory | This table contains the inter-shelf trunk topology. Each entry is represented by a source shelf and a destination shelf. |
| 1.3.6.1.4.1.1996.20.18.3.1 | RowcmTrunkTopoEntry | not-accessible | mandatory | Each entry in this table represents the connection topology for a possible path from one shelf to another. An entry will be indexed by a source and destination… |
| 1.3.6.1.4.1.1996.20.18.3.1.1 | ColumncmTrunkTopoSrc | read-only | mandatory | This value is used as the first index into the table. The shelf.board portions of the PII value are used to specify a particular SCM that will be the source of… |
| 1.3.6.1.4.1.1996.20.18.3.1.2 | ColumncmTrunkTopoDest | read-only | mandatory | This value is used as the second index into the table. The shelf.board portions of the PII value are used to specify a particular SCM that will be the destinat… |
| 1.3.6.1.4.1.1996.20.18.3.1.3 | ColumncmTrunkTopoInterface | read-only | mandatory | Ethernet port to be used on source shelf for the first hop from the source SCM. |
| 1.3.6.1.4.1.1996.20.18.3.1.4 | ColumncmTrunkTopoNextHop | read-only | mandatory | The next shelf on this path. |
| 1.3.6.1.4.1.1996.20.18.3.1.5 | ColumncmTrunkTopoHops | read-only | mandatory | The number of hops required going from the source SCM to the destination SCM. |
| 1.3.6.1.4.1.1996.20.19 | NodecmDHCP | |||
| 1.3.6.1.4.1.1996.20.19.1 | TablecmDHCPTable | not-accessible | mandatory | This table provides a way for an operator to configure all of the configuration that will be sent to a CPE when the system receives a DHCP request from that CP… |
| 1.3.6.1.4.1.1996.20.19.1.1 | RowcmDHCPEntry | not-accessible | mandatory | The DHCP configuration information associated with a given DSL Port. |
| 1.3.6.1.4.1.1996.20.19.1.1.1 | ColumncmDHCPPII | read-only | mandatory | This is the PII of the DSL port. This is also the index into the table. |
| 1.3.6.1.4.1.1996.20.19.1.1.2 | ColumncmDHCPRowStatus | read-write | mandatory | This object is used to create and delete entries from this table. An operator can implicitly create a row in this table by setting any object in the table or b… |
| 1.3.6.1.4.1.1996.20.19.1.1.3 | ColumncmDHCPIpAddress | read-write | mandatory | This is the IpAddress that will be sent to the CPE when a DHCP request is received over the DSL link. Default: 0.0.0.0 |
| 1.3.6.1.4.1.1996.20.19.1.1.4 | ColumncmDHCPNetMask | read-write | mandatory | This is the NetMask that will be sent to the CPE when a DHCP request is received over the DSL link. Default: 0.0.0.0 |
| 1.3.6.1.4.1.1996.20.20 | NodecmServiceClass | |||
| 1.3.6.1.4.1.1996.20.20.1 | ScalarcmServiceClassAweight | read-write | mandatory | The relative weight of the A Service Class. The percentage of packets that will come from interfaces assigned to class A is: ( Aweight / (Aweight+Bweight+Cweig… |
| 1.3.6.1.4.1.1996.20.20.2 | ScalarcmServiceClassBweight | read-write | mandatory | The relative weight of the B Service Class. The percentage of packets that will come from interfaces assigned to class B is: ( Bweight / (Aweight+Bweight+Cweig… |
| 1.3.6.1.4.1.1996.20.20.3 | ScalarcmServiceClassCweight | read-write | mandatory | The relative weight of the C Service Class. The percentage of packets that will come from interfaces assigned to class C is: ( Cweight / (Aweight+Bweight+Cweig… |
| 1.3.6.1.4.1.1996.20.20.4 | ScalarcmServiceClassDweight | read-write | mandatory | The relative weight of the D Service Class. The percentage of packets that will come from interfaces assigned to class D is: ( Dweight / (Aweight+Bweight+Cweig… |
| 1.3.6.1.4.1.1996.20.21 | NodecmEndPoint | |||
| 1.3.6.1.4.1.1996.20.21.1 | TablecmEndPointPortTable | not-accessible | mandatory | This read-only table lists all the DSL ports that belong to the same CPE. Each CPE or CPE stack is identified with an unique EndPointID and not all the CPEs su… |
| 1.3.6.1.4.1.1996.20.21.1.1 | RowcmEndPointPortEntry | not-accessible | mandatory | Each entry in the table contains information for a DSL port that belongs to a specific EndPointID(CPE or CPE stack). This information includes the EndPointID, … |
| 1.3.6.1.4.1.1996.20.21.1.1.1 | ColumncmEndPointPortBasePII | read-only | mandatory | This is the PII of a physical DSL port, to which the operator wants to find the paired ports. |
| 1.3.6.1.4.1.1996.20.21.1.1.2 | ColumncmEndPointPortNumber | read-only | mandatory | Indicates the Nth DSL port reporting the same EndPointID as the BasePII. |
| 1.3.6.1.4.1.1996.20.21.1.1.3 | ColumncmEndPointPortEndPointID | read-only | mandatory | This is the EndPointID that is being reported by both the CPE connected to the BasePII and the CPE connected to the PartnerPII in this instance of the table |
| 1.3.6.1.4.1.1996.20.21.1.1.4 | ColumncmEndPointPortPartnerPortPII | read-only | mandatory | This is the PII of the port connected to the CPE reporting the same EndPointID as the BasePII. |
| 1.3.6.1.4.1.1996.20.21.1.1.5 | ColumncmEndPointPortPartnerBundlePII | read-only | mandatory | The PII of the IMUX bundle the PartnerPortPII belongs to. Otherwise, this field is all zeros |
| 1.3.6.1.4.1.1996.20.21.1.1.6 | ColumncmEndPointPortNumMatchingEndPoint | read-only | mandatory | Number of currently trained DSL ports whose CPE are reporting the same EndPointID as the BasePII (including BasePII) |
| 1.3.6.1.4.1.1996.20.21.2 | TablecmEndPointConfigTable | not-accessible | mandatory | This table contains configuration data stored in the system that is used to control and monitor a given CPE endpoint. This group is currently used to configure… |
| 1.3.6.1.4.1.1996.20.21.2.1 | RowcmEndPointConfigEntry | not-accessible | mandatory | Each entry in the table contains user configurable information for a DSL port. Currently, each entry has information as to whether the the bulk download is ena… |
| 1.3.6.1.4.1.1996.20.21.2.1.1 | ColumncmEndPointConfigPII | read-only | mandatory | This is the PII of the DSL port to which the configuration is applicable to. |
| 1.3.6.1.4.1.1996.20.21.2.1.2 | ColumncmEndPointConfigRowStatus | read-write | mandatory | This object is used to create and delete entries from this table. An operator can implicitly create a row in this table by setting the BulkDownload object with… |
| 1.3.6.1.4.1.1996.20.21.2.1.3 | ColumncmEndPointConfigBulkDownload | read-write | mandatory | This object indicates whether the operator wants this CPE to be downloaded to the software version in the CE's code directory when a bulkCPEDownload command is… |
| 1.3.6.1.4.1.1996.20.21.2.1.4 | ColumncmEndPointConfigDownloadStatus | read-only | mandatory | This object shows the status of a bulkCPEDownload command relative to this specific CPE. None indicates that no bulkCPEDownload command has been executed since… |
| 1.3.6.1.4.1.1996.20.21.2.1.5 | ColumncmEndPointConfigDownloadStartTime | read-only | mandatory | This is the time the download command is sent to the CPE. |
| 1.3.6.1.4.1.1996.20.21.2.1.6 | ColumncmEndPointConfigDownloadEndTime | read-only | mandatory | This is the time when a successful or failed download was detected. |
| 1.3.6.1.4.1.1996.20.22 | NodecmOperator | |||
| 1.3.6.1.4.1.1996.20.22.1 | TablecmActiveSessionTable | not-accessible | mandatory | This is a table group with one record per active operator session. This table is indexed with database session ID. |
| 1.3.6.1.4.1.1996.20.22.1.1 | RowcmActiveSessionEntry | not-accessible | mandatory | Each entry in the table contains information for an operator login session. This table is indexed with database session ID. |
| 1.3.6.1.4.1.1996.20.22.1.1.1 | ColumncmActiveSessionSessionID | read-only | mandatory | The database session ID for this operator session. |
| 1.3.6.1.4.1.1996.20.22.1.1.2 | ColumncmActiveSessionOperatorName | read-only | mandatory | The operator name. |
| 1.3.6.1.4.1.1996.20.22.1.1.3 | ColumncmActiveSessionContext | read-only | mandatory | The context through which the operator is logged in. |
| 1.3.6.1.4.1.1996.20.22.1.1.4 | ColumncmActiveSessionPrivilege | read-only | mandatory | The context through which the operator is logged in. |
| 1.3.6.1.4.1.1996.20.22.1.1.5 | ColumncmActiveSessionIpAddress | read-only | mandatory | The IP Address through which the operator is logged in, if the operator is logged in through Telnet or SNMP. If an operator is logged in through the Craft inte… |
| 1.3.6.1.4.1.1996.20.22.1.1.6 | ColumncmActiveSessionStartTime | read-only | mandatory | The system time when the session was started. |
| 1.3.6.1.4.1.1996.20.22.1.1.7 | ColumncmActiveSessionIdleTimeout | read-only | mandatory | The idle timeout in seconds when the active session will auto-logout. |
| 1.3.6.1.4.1.1996.20.23 | NodecmRadius | |||
| 1.3.6.1.4.1.1996.20.23.1 | ScalarcmRadiusAuthentication | read-only | mandatory | The value of this object indicates if the RADIUS option is enabled or disabled. |
| 1.3.6.1.4.1.1996.20.23.2 | ScalarcmRadiusAuthKey | read-only | mandatory | The value of this object is the RADIUS Protocol Authenticator, a shared secret between the server and client. |
| 1.3.6.1.4.1.1996.20.23.3 | ScalarcmRadiusAuthPrimaryIpAddr | read-only | mandatory | The value of this object is the Primary IP address of the RADIUS-Authenticating server. |
| 1.3.6.1.4.1.1996.20.23.4 | ScalarcmRadiusAuthPrimaryPort | read-only | mandatory | The value of this object is the RADIUS-Authenticating Primary Server's port number that the system binds to. Default: 1645 |
| 1.3.6.1.4.1.1996.20.23.5 | ScalarcmRadiusAuthSecondaryIpAddr | read-only | mandatory | The value of this object is the Secondary IP address of the RADIUS-Authenticating server. |
| 1.3.6.1.4.1.1996.20.23.6 | ScalarcmRadiusAuthSecondaryPort | read-only | mandatory | The value of this object is the RADIUS-Authenticating Secondary Server's port number that the system binds to. Default: 1645 |
| 1.3.6.1.4.1.1996.20.23.7 | ScalarcmRadiusAuthTertiaryIpAddr | read-only | mandatory | The value of this object is the Tertiary IP address of the RADIUS-Authenticating server. |
| 1.3.6.1.4.1.1996.20.23.8 | ScalarcmRadiusAuthTertiaryPort | read-only | mandatory | The value of this object is the RADIUS-Authenticating Tertiary Server's port number that the system binds to. Default: 1645 |
| 1.3.6.1.4.1.1996.20.23.9 | ScalarcmRadiusAcctPrimaryIpAddr | read-only | mandatory | The value of this object is the Primary IP address of the RADIUS-Accounting server. |
| 1.3.6.1.4.1.1996.20.23.10 | ScalarcmRadiusAcctPrimaryPort | read-only | mandatory | The value of this object is the RADIUS-Accounting Primary Server's port number that the system binds to. Default: 1646 |
| 1.3.6.1.4.1.1996.20.23.11 | ScalarcmRadiusAcctSecondaryIpAddr | read-only | mandatory | The value of this object is the Secondary IP address of the RADIUS-Accounting server. |
| 1.3.6.1.4.1.1996.20.23.12 | ScalarcmRadiusAcctSecondaryPort | read-only | mandatory | The value of this object is the RADIUS-Accounting Secondary Server's port number that the system binds to. Default: 1646 |
| 1.3.6.1.4.1.1996.20.23.13 | ScalarcmRadiusAcctTertiaryIpAddr | read-only | mandatory | The value of this object is the Tertiary IP address of the RADIUS-Accounting server. |
| 1.3.6.1.4.1.1996.20.23.14 | ScalarcmRadiusAcctTertiaryPort | read-only | mandatory | The value of this object is the RADIUS-Accounting Tertiary Server's port number that the system binds to. Default: 1646 |
| 1.3.6.1.4.1.1996.20.24 | NodecmSNMP | |||
| 1.3.6.1.4.1.1996.20.24.1 | ScalarcmSNMPResponseString | read-write | mandatory | Copper Mountain proprietary object used for internal processing. |
| 1.3.6.1.4.1.1996.21 | NodecmFanFailureClear | Indicates that the system fan failure has been cleared. If this trap has a severity of 'information,' it can potentially clear an alarm in the system. When suc… | ||
| 1.3.6.1.4.1.1996.22 | NodecmPowerSupplyFailure | Indicates that one of the two system power supplies has failed. The failed power supply is identified by cmTrapEventLogObjectClass and cmTrapEventLogClassId. | ||
| 1.3.6.1.4.1.1996.23 | NodecmPowerSupplyFailureClear | Indicates that a previous power supply failure has been cleared. The power supply is identified by cmTrapEventLogObjectClass and cmTrapEventLogClassId. If this… | ||
| 1.3.6.1.4.1.1996.24 | NodecmLoopStatusChange | This trap is sent at the beginning and end of a loopback test. the cmLoopTermCode, cmLoopTimeElapsed, cmLoopTxCount, and cmLoopRxErrors fields are only valid i… | ||
| 1.3.6.1.4.1.1996.25 | NodecmRisingAlarm | The SNMP trap that is generated when an alarm entry crosses its rising threshold and generates an event that is configured for sending SNMP traps. | ||
| 1.3.6.1.4.1.1996.26 | NodecmIDSLBoardTimingLoss | This trap indicates that the globally timed master or slave IDSL Line Card has lost network timing. | ||
| 1.3.6.1.4.1.1996.27 | NodecmIDSLBoardTimingLossClear | This trap indicates that the globally timed master or slave IDSL Line Card has reaquired network timing. If this trap has a severity of 'information,' it can p… | ||
| 1.3.6.1.4.1.1996.28 | NodecmRoleChange | This trap is sent whenever an SCM changes role from Primary to Secondary, or from Secondary to Primary. If this trap has a severity of 'information,' it can po… | ||
| 1.3.6.1.4.1.1996.29 | NodecmRedundancyChange | This trap is sent whenever an SCM detects that Redundancy has changed from enabled/disabled to disabled/enabled. | ||
| 1.3.6.1.4.1.1996.30 | NodecmRedundancyConflict | This trap is sent when an SCM comes up, detects that it should be locked as the Primary SCM, but there is another Primary which has already locked the system (… | ||
| 1.3.6.1.4.1.1996.31 | NodecmMaintCmdStatusChange | Indicates a maintenance command completed successfully or failed, according to the CommandStatus field. | ||
| 1.3.6.1.4.1.1996.32 | NodecmFallingAlarm | This trap is sent at the end of an interval when an object that is configured with a Falling Threshold has dropped below the fallingThresdhold value in the cmA… | ||
| 1.3.6.1.4.1.1996.33 | NodecmRateFallback | This trap is sent whenever a modem trains at a rate less than the configured datarate. | ||
| 1.3.6.1.4.1.1996.34 | NodecmRateFallbackClear | This trap is sent whenever the modem drops training. | ||
| 1.3.6.1.4.1.1996.35 | NodecmEndPointConflictAlarm | This minor severity trap is sent if one of the following configuration conflicts occurs: 1. A DSL link comes up and the EndPointID matches another DSL link out… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CmObjectPII | INTEGER | ||
| DLCI | INTEGER | ||
| EntryStatus | INTEGER { valid(1), createRequest(2), underCreation(3), invalid(4) } |