MIB Viewer

CPE-DSL-MIB

105 objects
xDSL CPE MIB.
Imported Objects
ATM-MIBatmVclVci atmVclVpi
IF-MIBifIndex
SNMPv2-SMIenterprises Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TCDateAndTime DisplayString RowStatus TEXTUAL-CONVENTION
OIDNameAccessStatusDescription
1.3.6.1.4.1.16972IdentitycpeDSLxDSL CPE MIB.
1.3.6.1.4.1.16972.1NodecpeSysInfo
1.3.6.1.4.1.16972.1.1ScalarcpeSysInfoUptimeread-onlycurrentIt is the working time since CPE rebooted.
1.3.6.1.4.1.16972.1.2ScalarcpeSysInfoConfigIdread-writecurrentfor synchronizing configuration by network manager
1.3.6.1.4.1.16972.1.3ScalarcpeSysInfoFirmwareVersionread-onlycurrentChipset version information.
1.3.6.1.4.1.16972.1.4ScalarcpeSysInfoProductIdread-onlycurrentCPE product module,For example, the 'MT800' is the product id.
1.3.6.1.4.1.16972.1.5ScalarcpeSysInfoVendorIdread-onlycurrentthe name of CPE vendor.
1.3.6.1.4.1.16972.1.6ScalarcpeSysInfoSystemVersionread-onlycurrentCPE system version
1.3.6.1.4.1.16972.1.7ScalarcpeSysInfoWorkModeread-onlycurrentCPE s work mode.
1.3.6.1.4.1.16972.1.8ScalarcpeSysInfoMibVersionread-onlycurrentThe MIB's version,now the vaersion is V1.00
1.3.6.1.4.1.16972.1.9ScalarcpeSysInfoSerialNumberread-onlycurrentThe CPE's BAR CODE including serial number to identify itself to each other it is embedded by equipment provider while manufacturing .
1.3.6.1.4.1.16972.1.10ScalarcpeSysInfoManufacturerOuiread-onlycurrentthe OUI (Organizationally Unique Identifier) of IEEE standard organization provided. For example, this huawei CPE ADSL is 00E0FC
1.3.6.1.4.1.16972.2NodecpeConfig
1.3.6.1.4.1.16972.2.1NodecpeSystem
1.3.6.1.4.1.16972.2.1.1ScalarcpeSystemRebootread-writecurrentRebooting CPE s operation
1.3.6.1.4.1.16972.2.1.2ScalarcpeSystemSaveread-writecurrentsaving the CPE s configuration to NVRAM
1.3.6.1.4.1.16972.2.1.3ScalarcpeSystemRestoreread-writecurrentRestore CPE s configuration restoreToNull(1), clear all of the configuration restoreToDefault(2) restore to default configuration
1.3.6.1.4.1.16972.2.1.4ScalarcpeSystemTrapEnableread-writecurrenttrap notification switch, if set to Disable CPE will not send trap notification untill it is set to enable
1.3.6.1.4.1.16972.2.1.5ScalarcpeBootTrapResponseread-writecurrentIt is the boottrap response identity Every time,when CPE is rebooted, it is set to 'noResponse'
1.3.6.1.4.1.16972.2.1.6ScalarcpeReservedStringread-writecurrentIt is the reserved string
1.3.6.1.4.1.16972.2.2NodecpeConfigAdslLine
1.3.6.1.4.1.16972.2.2.1ScalarcpeConfigAdslLineTrellisread-writecurrenttrellis encoding configuration.
1.3.6.1.4.1.16972.2.2.2ScalarcpeConfigAdslLineHandshakeread-writecurrentlink handshake negotiation mode configuration
1.3.6.1.4.1.16972.2.2.3ScalarcpeConfigAdslLineBitSwappingread-writecurrentBITSWAP encoding configuration
1.3.6.1.4.1.16972.2.3TablecpePvcTablenot-accessiblecurrentPVC VCL configuration table It is RFC2515 ATM-MIB atmVclTable s extended table
1.3.6.1.4.1.16972.2.3.1RowcpePvcEntrynot-accessiblecurrentPVC VCL configuration entry
1.3.6.1.4.1.16972.2.3.1.1ColumncpePvcIdread-onlycurrentPVC number It is used for identify PVC in CPE
1.3.6.1.4.1.16972.2.3.1.3ColumncpePvcIfIndexread-onlycurrentthis parameter is used for bonding upper layer service s index
1.3.6.1.4.1.16972.2.3.1.4ColumncpePvcUpperEncapsulationread-createcurrentPVC service encapsulation type
1.3.6.1.4.1.16972.2.3.1.5ColumncpePvcAdminStatusread-createdeprecatedPVC active and deactive operation, We suggest to use the atmVclAdminStatus in the vclTableof ATM-MIB instead ofcpePvcAdminStatus
1.3.6.1.4.1.16972.2.3.1.6ColumncpePvcOperStatusread-onlydeprecatedPVC active and deactive status. We suggest to use the atmVclOperStatus in the vclTableof ATM-MIB instead of cpePvcOperStatus
1.3.6.1.4.1.16972.2.3.1.7ColumncpePvcBridgeModeread-createcurrentbridge mode configuration only when cpePvcUpperEncapsulation is set to 'bridge2684' this configuration is available
1.3.6.1.4.1.16972.2.3.1.8ColumncpePvcMacLearnModeread-createdeprecatedMAC address learn mode configuration, it's no use.
1.3.6.1.4.1.16972.2.3.1.9ColumncpePvcIgmpModeread-createcurrentif IGMP traffic and internet traffic service is beared by different PVC It can be configured by this parameter
1.3.6.1.4.1.16972.2.3.1.10ColumncpePvcDhcpClientModeread-createcurrentDHCP client mode configuration
1.3.6.1.4.1.16972.2.3.1.11ColumncpePvcNatModeread-createcurrentNAT mode configuration
1.3.6.1.4.1.16972.2.4TablecpePppTablenot-accessiblecurrentPPP configuration table,it is pppSecuritySecretsTable s extended table pppSecuritySecretsLink is set to 0 cpePppIfIndex pppSecuritySecretsIdIndex
1.3.6.1.4.1.16972.2.4.1RowcpePppEntrynot-accessiblecurrentPPP configuration entry
1.3.6.1.4.1.16972.2.4.1.1ColumncpePppIfIndexread-onlycurrentppp s index
1.3.6.1.4.1.16972.2.4.1.2ColumncpePppPvcIfIndexread-createcurrentthe lower layer logic interface index for ppp,also the ATM layer logic interface index for ppp,the value is the same as cpePvcIfindex
1.3.6.1.4.1.16972.2.4.1.3ColumncpePppServiceNameread-createcurrentPPP service name
1.3.6.1.4.1.16972.2.4.1.4ColumncpePppDisconnectTimeoutread-createcurrentPPP idle disconnect timeout parameter, if it is set to zero, the PPP connection will not Be disconnected. If it not set to zero, the PPP will be disconnected i…
1.3.6.1.4.1.16972.2.4.1.5ColumncpePppMSSread-createcurrentPPP s max segment size
1.3.6.1.4.1.16972.2.4.1.6ColumncpePppRowStatusread-createcurrentPPP table s row status
1.3.6.1.4.1.16972.2.4.1.7ColumncpePppAdminStatusread-createcurrentPpp link operation up(1), activate operation down(2), deactivate operation test(3), PPP test,test operating should generated an trap after it is done. cannel(4…
1.3.6.1.4.1.16972.2.4.1.8ColumncpePppOperStatusread-onlycurrentppp link status up(1): active status down(2):deactive status
1.3.6.1.4.1.16972.2.4.1.9ColumncpePppTestResultread-onlycurrentppp test result success(1), testing(2) authFail(3), failure(4)
1.3.6.1.4.1.16972.2.5TablecpeIpTablenot-accessiblecurrentIP address table
1.3.6.1.4.1.16972.2.5.1RowcpeIpEntrynot-accessiblecurrentInterface s IP address entry
1.3.6.1.4.1.16972.2.5.1.1ColumncpeIpIndexread-onlycurrentIP address table s index
1.3.6.1.4.1.16972.2.5.1.2ColumncpeIpLowerIfIndexread-createcurrentlower layer s logic index
1.3.6.1.4.1.16972.2.5.1.3ColumncpeIpAddressread-createcurrentIP address
1.3.6.1.4.1.16972.2.5.1.4ColumncpeIpNetmaskread-createcurrentIP address netmask
1.3.6.1.4.1.16972.2.5.1.5ColumncpeIpGatewayread-createcurrentthe gateway address, NMS could config it only when the IP is gained by static mode, otherwise ,it can be read-ony mode.
1.3.6.1.4.1.16972.2.5.1.6ColumncpeIpRowStatusread-createcurrentthe row status of IP address table
1.3.6.1.4.1.16972.2.6NodecpeLanDhcp
1.3.6.1.4.1.16972.2.6.1ScalarcpeLanDhcpAdminStatusread-writecurrentdhcp mode configuration noSupport(1), no support dhcp dhcpServer(2),support dhcp server
1.3.6.1.4.1.16972.2.7NodecpeWanDns
1.3.6.1.4.1.16972.2.7.1ScalarcpeDnsPrimaryAddressread-writecurrentthe primary DNS IP address
1.3.6.1.4.1.16972.2.7.2ScalarcpeDnsSecondAddressread-writecurrentthe secondary DNS IP address
1.3.6.1.4.1.16972.3NodecpeSysLog
1.3.6.1.4.1.16972.3.1ScalarcpeSysLogBeginTimeread-writecurrentsyslog requery s begin time
1.3.6.1.4.1.16972.3.2ScalarcpeSysLogEndTimeread-writecurrentsyslog requery s end time
1.3.6.1.4.1.16972.3.3ScalarcpeSysLogAdminStatusread-writecurrentrequery syslog operation start(1), start requery syslog clear(2), clear CPE s syslog record
1.3.6.1.4.1.16972.3.4TablecpeSysLogTablenot-accessiblecurrentsyslog record s table
1.3.6.1.4.1.16972.3.4.1RowcpeSysLogEntrynot-accessiblecurrentsyslog record s entry
1.3.6.1.4.1.16972.3.4.1.1ColumncpeSysLogIndexread-onlycurrentthe syslog record s index
1.3.6.1.4.1.16972.3.4.1.2ColumncpeSysLogContentread-onlycurrentthe syslog s detail description
1.3.6.1.4.1.16972.4NodecpeFtp
1.3.6.1.4.1.16972.4.1ScalarcpeFtpIPread-writecurrentthe FTP Server s IP address
1.3.6.1.4.1.16972.4.2ScalarcpeFtpUserread-writecurrentthe user name for FTP
1.3.6.1.4.1.16972.4.3ScalarcpeFtpPasswdread-writecurrentthe access password for FTP
1.3.6.1.4.1.16972.4.4ScalarcpeFtpFileNameread-writecurrentthe file name for ftp download which is saved in FTP server.
1.3.6.1.4.1.16972.4.5ScalarcpeFtpAdminStatusread-writecurrentFTP administration operation
1.3.6.1.4.1.16972.4.6ScalarcpeFtpOperStatusread-onlycurrentFTP administration status
1.3.6.1.4.1.16972.4.8ScalarcpeFtpTotalSizeread-onlycurrentthe file s total size for download unit is Kbyte
1.3.6.1.4.1.16972.4.9ScalarcpeFtpDoneSizeread-onlycurrentthe file s size which is already download unit is Kbyte
1.3.6.1.4.1.16972.4.10ScalarcpeFtpElapseTimeread-onlycurrentthe elapse time for FTP download
1.3.6.1.4.1.16972.5NodecpeDiagnose
1.3.6.1.4.1.16972.5.1NodecpePing
1.3.6.1.4.1.16972.5.1.1ScalarcpePingAddrread-writecurrentthe destination IP address for ping test either IP or Domain name
1.3.6.1.4.1.16972.5.1.2ScalarcpePingPkgSizeread-writecurrentthe packet size for ping test
1.3.6.1.4.1.16972.5.1.3ScalarcpePingCountread-writecurrentthe count of sending packets for ping test
1.3.6.1.4.1.16972.5.1.4ScalarcpePingAdminStatusread-writecurrentping test operation stop(1), start ping test start(2) stop ping test
1.3.6.1.4.1.16972.5.1.5ScalarcpePingOperStatusread-onlycurrentping test operation status
1.3.6.1.4.1.16972.5.1.6ScalarcpePingResultread-onlycurrentping test result IP 10.1.1.100 Sent = xx Received = xx Lost = xx Min = xx ms Max = xx ms Average = xx ms
1.3.6.1.4.1.16972.6NodecpeTrap
1.3.6.1.4.1.16972.6.0NodecpeTraps
1.3.6.1.4.1.16972.6.0.1NotificationcpeBootTrapcurrenttrap notification when CPE is rebooted. CPE is needed to send all parameters in one trap packet.
1.3.6.1.4.1.16972.6.0.2NotificationcpeFtpDonecurrenttrap notification when ftp download is finished
1.3.6.1.4.1.16972.6.0.3NotificationcpePingDonecurrenttrap notification when PING test is finished
1.3.6.1.4.1.16972.6.0.4NotificationcpePppTestDonecurrenttrap notification when PPP test is finished
Type Definitions
NameSyntaxStatusDescription
AdslAtmIfIndexRangeInteger32 (140000..149999)currentifIndex range of ATM interface.
AdslFastIfIndexRangeInteger32 (130000..139999)currentifIndex range of ADSL fast mode interface.
AdslIfIndexRangeInteger32 (40000..49999)currentifIndex range of ADSL interface.
AdslInterLeaveIfIndexRangeInteger32 (120000..129999)currentifIndex range of ADSL interleave mode interface.
BridgeIfIndexRangeInteger32 (110000..119999)currentifIndex range of bridge interface.
EnableAdminINTEGER { enable(1), disable(2) }currentEnable operation switch
EthernetIfIndexRangeInteger32 (10000..19999)currentifIndex range of Ethernet interface.
Ieee8022Dot1xIfIndexRangeInteger32 (30000..39999)currentifIndex range of 802.1X interface.
ModemIfIndexRangeInteger32 (50000..59999)currentifIndex range of Modem interface.
PppIfIndexRangeInteger32 (210000..219999)currentifIndex range of PPP.
PvcIfIndexRangeInteger32 (150000..159999)currentifIndex range of PVC AAL5
Rs232IfIndexRangeInteger32 (60000..69999)currentifIndex range of RS232 interface.
UsbIfIndexRangeInteger32 (20000..29999)currentifIndex range of usb interface.