CPIWF-MIB
122 objects
This module defines a portion of the management information base (MIB) for managing the LES CP-IWFs. It is meant to be used in connection with MIB-II System Group and RFC 2863 which defines the ifTable.
Imported Objects
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 enterprises Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.353 | NodeatmForum | |||
| 1.3.6.1.4.1.353.5 | NodeatmForumNetworkManagement | |||
| 1.3.6.1.4.1.353.5.10 | NodeatmfLoopEmulationService | |||
| 1.3.6.1.4.1.353.5.10.1 | IdentitycpIwfMIB | This module defines a portion of the management information base (MIB) for managing the LES CP-IWFs. It is meant to be used in connection with MIB-II System Gr… | ||
| 1.3.6.1.4.1.353.5.10.1.1 | NodecpIwfMIBObjects | |||
| 1.3.6.1.4.1.353.5.10.1.1.1 | NodecpIwf | |||
| 1.3.6.1.4.1.353.5.10.1.1.1.1 | ScalarcpIwfVpi | read-only | current | The VPI of the AAL2 VCC to which this CP-IWF is associated. |
| 1.3.6.1.4.1.353.5.10.1.1.1.2 | ScalarcpIwfVci | read-only | current | The VCI of the AAL2 VCC to which this CP-IWF is associated. |
| 1.3.6.1.4.1.353.5.10.1.1.1.3 | ScalarcpIwfEchoCancellationSupport | read-only | current | Specifies whether or not the echo cancellation facility is supported or not supported at the CP-IWF. |
| 1.3.6.1.4.1.353.5.10.1.1.1.4 | ScalarcpIwfNumPotsPorts | read-only | current | The total number of POTS user ports on the CP-IWF. |
| 1.3.6.1.4.1.353.5.10.1.1.1.5 | ScalarcpIwfNumIsdnBriPorts | read-only | current | The total number of ISDN-BRI user ports on the CP-IWF. |
| 1.3.6.1.4.1.353.5.10.1.1.1.6 | ScalarcpIwfTimingReference | read-only | current | ntr - network timing reference, voice timing derived from the local network interface. adaptiveVoice - voice timing derived from incoming cell rate. freeRun - … |
| 1.3.6.1.4.1.353.5.10.1.1.1.7 | ScalarcpIwfPotsPortEncodingSelectionMode | read-write | current | This object controls the encoding switching for POTS user ports. masterSlave - the profile entry used by the CP-IWF is the same as that selected by the CO-IWF.… |
| 1.3.6.1.4.1.353.5.10.1.1.1.8 | ScalarcpIwfIsdnBriPortEncodingSelectionMode | read-write | current | This object controls the encoding switching for ISDN BRI user ports. masterSlave - the profile entry used by the CP-IWF is the same as that selected by the CO-… |
| 1.3.6.1.4.1.353.5.10.1.1.1.9 | ScalarcpIwfElcpAndPstnChannelBandwidth | read-write | current | The approximate maximum bandwidth of the aal2 connection with CID=8 used to transport ELCP and PSTN signalling messages specified in bits per second at the phy… |
| 1.3.6.1.4.1.353.5.10.1.1.1.10 | ScalarcpIwfAdminStatus | read-write | current | This object is used to reflect the desired state of the CP-IWF. The actual state of the CP-IWF is given by cpIwfOperStatus. When this object is set to 'down', … |
| 1.3.6.1.4.1.353.5.10.1.1.1.11 | ScalarcpIwfOperStatus | read-only | current | Provides the current operational status of the CP-IWF function. |
| 1.3.6.1.4.1.353.5.10.1.1.1.12 | ScalarcpIwfRestart | read-write | current | May be used to initiate a re-start of the CP-IWF function. A Get operation performed on this object will always return 'started'. Re-start is initiated by perf… |
| 1.3.6.1.4.1.353.5.10.1.1.1.13 | ScalarcpIwfTestType | read-write | current | This object is used to specify the type of test to run. The result of the self test will be stored in cpIwfTestResult. In order to run this test, the CO-IWF mu… |
| 1.3.6.1.4.1.353.5.10.1.1.1.14 | ScalarcpIwfTestResult | read-only | current | Provides the result of the last self-test operation performed on the CP-IWF. If no self-test has been performed, this object should return null (1). |
| 1.3.6.1.4.1.353.5.10.1.1.1.15 | ScalarcpIwfTestResultText | read-only | current | Provides textual information about the result of the last self-test operation performed on the CP-IWF, or a zero-length string if no tests have been performed … |
| 1.3.6.1.4.1.353.5.10.1.1.1.16 | ScalarcpIwfPlayoutBufferDepth | read-write | current | The amount of packet delay variation to be accommodated on all ports of the CP-IWF, in milliseconds. |
| 1.3.6.1.4.1.353.5.10.1.1.1.17 | ScalarcpIwfImpairmentInterval | read-write | current | The period over which voice impairments should be counted to determine whether a threshold-crossing event has occurred, in minutes. It is recommended that this… |
| 1.3.6.1.4.1.353.5.10.1.1.1.18 | ScalarcpIwfImpairmentThreshold | read-write | current | If the number of impairment octets, calculated as the sum of fillerOctets and droppedOctets, that is observed on any individual POTS port or ISDN BRI port/chan… |
| 1.3.6.1.4.1.353.5.10.1.1.1.19 | ScalarcpIwfV5PSTNProtocolVariant | read-write | current | When the applicationIdentifier indicates the use of PSTN signalling for POTS the value of this object shall be set to the national PSTN protocol variant to be … |
| 1.3.6.1.4.1.353.5.10.1.1.1.20 | ScalarcpIwfMwdForRestart | read-write | current | This object defines the maximum waiting delay (MWD) in seconds used during restart. When this CP-IWF is powered on, it shall initiate a restart timer to a rand… |
| 1.3.6.1.4.1.353.5.10.1.1.1.21 | ScalarcpIwfEocBandwidth | read-write | current | Provides the approximate maximum bandwidth of the EOC in bits per second at the physical layer. |
| 1.3.6.1.4.1.353.5.10.1.1.1.22 | ScalarcpIwfCurrentConfig | read-write | current | This object provides an efficient mechanism for a management entity to maintain synchronization with a CP-IWF current level of configuration. The value should … |
| 1.3.6.1.4.1.353.5.10.1.1.1.23 | ScalarcpIwfTrapGeneration | read-write | current | Using this object, the CP-IWF EMS can globally disable all trap generation by the CP-IWF. By default, the CP-IWF shall be globally enabled to generate any/all … |
| 1.3.6.1.4.1.353.5.10.1.1.1.24 | ScalarcpIwfVendorName | read-only | current | The name of the vendor that produced the LES device in which this CP-IWF function resides. |
| 1.3.6.1.4.1.353.5.10.1.1.1.25 | ScalarcpIwfDeviceType | read-only | current | The vendor's designated model number for the LES device in which this CP-IWF function resides. |
| 1.3.6.1.4.1.353.5.10.1.1.1.26 | ScalarcpIwfHardwareVersion | read-only | current | The vendor's designated hardware revision for the LES device in which this CP-IWF function resides. |
| 1.3.6.1.4.1.353.5.10.1.1.1.27 | ScalarcpIwfSoftwareVersion | read-only | current | The vendor's designated software revision for the software that implements the CP-IWF function. |
| 1.3.6.1.4.1.353.5.10.1.1.2 | NodecpIwfAal2Profile | |||
| 1.3.6.1.4.1.353.5.10.1.1.2.1 | Scalaraal2ApplicationIdentifier | read-write | current | This attribute describes the application identifier, which describes the type of signaling used. The value of this object should be one of those values given i… |
| 1.3.6.1.4.1.353.5.10.1.1.2.2 | Scalaraal2CpsMaxMultiplexedChannels | read-write | current | Maximum number of multiplexed channels. |
| 1.3.6.1.4.1.353.5.10.1.1.2.3 | Scalaraal2CpsMaxSDULength | read-write | current | Maximum CPS-SDU size given in octets. |
| 1.3.6.1.4.1.353.5.10.1.1.2.4 | Scalaraal2CpsCIDLowerLimit | read-write | current | The minimum value the CID can take for AAL2 bearer channels and ISDN D-channels. |
| 1.3.6.1.4.1.353.5.10.1.1.2.5 | Scalaraal2CpsCIDUpperLimit | read-write | current | The maximum value the CID can take for AAL2 bearer channels and ISDN D-channels. |
| 1.3.6.1.4.1.353.5.10.1.1.2.6 | Scalaraal2CpsOptimisation | read-write | current | This object refers to the mode of operation of the CPS on the CP-IWF. The value of this object imposes a restriction on the CPS SDU length and hence must overr… |
| 1.3.6.1.4.1.353.5.10.1.1.2.7 | Scalaraal2CpsTimerCuValue | read-write | current | This parameter specifies value of the Timer-CU, in msec, for this VCC. This parameter has meaning only if the value of the parameter aal2CpsOptimisation is set… |
| 1.3.6.1.4.1.353.5.10.1.1.2.8 | Scalaraal2SscsFaxDemodulationTransport | read-write | current | This specifies whether fax demodulation is enabled or disabled. An SNMP Set to enable(2) when fax demodulation is not supported must result in an SNMP response… |
| 1.3.6.1.4.1.353.5.10.1.1.2.9 | Scalaraal2SscsDtmfDigitPacketTransport | read-write | current | This attribute describes whether DTMF digit packet transport is enabled or disabled. If the parameter value specifies 'enabled', then type 3 dialled digit pack… |
| 1.3.6.1.4.1.353.5.10.1.1.2.10 | Scalaraal2SscsPcmEncoding | read-write | current | This attribute describes the type of PCM encoding used. |
| 1.3.6.1.4.1.353.5.10.1.1.2.11 | Scalaraal2SscsMaxSssarSduLength | read-write | current | This is the maximum size an SSSAR-SDU can take as defined in I.366.1. This parameter only applies to those AAL2 channels using I.366.1 SSSAR. |
| 1.3.6.1.4.1.353.5.10.1.1.2.12 | Scalaraal2SscsProfileSource | read-write | current | This attribute describes the source of the profile source. An SNMP Set on this object to an unsupported profile source must result in an SNMP Response with err… |
| 1.3.6.1.4.1.353.5.10.1.1.2.13 | Scalaraal2SscsPredefinedProfileIdentifier | read-write | current | This attribute describes the predefined profile identifier. An SNMP Set on this object to an unsupported profile must result in an SNMP Response with error sta… |
| 1.3.6.1.4.1.353.5.10.1.1.2.14 | Scalaraal2SscsIeeeOui | read-write | current | This attribute contains the IEEE Organizationally Unique Identifier (OUI) of the entity that specified the profile being used, if other than ITU-T. For example… |
| 1.3.6.1.4.1.353.5.10.1.1.2.15 | Scalaraal2SscsSsSarAssemblyTimerValue | read-write | current | This object specifies the value of the segmentation reassembly timer, in msec, for I.366.1 SAR. The default value specified for this timer is effectively an in… |
| 1.3.6.1.4.1.353.5.10.1.1.3 | TablecpIwfPotsPortTable | not-accessible | current | This table contains information on the configuration of the POTS ports on the CP-IWF in addition to the information contained in the ifTable about the physical… |
| 1.3.6.1.4.1.353.5.10.1.1.3.1 | RowcpIwfPotsPortEntry | not-accessible | current | An entry in the cpIwfPotsPortTable that represents a single POTS port. |
| 1.3.6.1.4.1.353.5.10.1.1.3.1.1 | ColumnpotsPortNumber | not-accessible | current | The number identifying the POTS user port on the CP-IWF. |
| 1.3.6.1.4.1.353.5.10.1.1.3.1.2 | ColumnpotsPhysicalPort | read-write | current | This has the value of the ifIndex of the ifEntry of the physical POTS port to which this CP-IWF POTS port is connected. The value of (0) has the special meanin… |
| 1.3.6.1.4.1.353.5.10.1.1.3.1.3 | Columnaal2ChannelId | read-write | current | The CID of the AAL2 connection transporting this port's traffic over the AAL2 VCC. When the aal2ApplicationIdentifier indicates the presence of ELCP, this obje… |
| 1.3.6.1.4.1.353.5.10.1.1.3.1.4 | ColumnpotsPortTestType | read-write | current | This object is used to specify the type of test to run for POTS ports. There are no results stored locally for a loopback test. The tests involve looping back … |
| 1.3.6.1.4.1.353.5.10.1.1.3.1.5 | ColumnsignalingMethod | read-write | current | The signalling method to use for this user port. |
| 1.3.6.1.4.1.353.5.10.1.1.3.1.6 | ColumnpotsPortLabel | read-write | current | Label assigned by service provider to identify this CP-IWF port. For example, may be used to hold Directory Number. |
| 1.3.6.1.4.1.353.5.10.1.1.4 | TablecpIwfIsdnBriPortTable | not-accessible | current | This table contains information on the configuration of the ISDN BRI ports on the CP-IWF in addition to the information contained in the ifTable about the phys… |
| 1.3.6.1.4.1.353.5.10.1.1.4.1 | RowcpIwfIsdnBriPortEntry | not-accessible | current | An entry in the cpIwfIsdnBriPortTable that represents a single ISDN BRI port. |
| 1.3.6.1.4.1.353.5.10.1.1.4.1.1 | ColumnisdnBriPortNumber | not-accessible | current | The number identifying the ISDN BRI user port on the CP-IWF. |
| 1.3.6.1.4.1.353.5.10.1.1.4.1.2 | ColumnisdnBriPhysicalPort | read-write | current | This has the value of the ifIndex of the ifEntry of the physical ISDN BRI port to which this CP-IWF ISDN BRI port is connected. The value of (0) has the specia… |
| 1.3.6.1.4.1.353.5.10.1.1.4.1.3 | Columnaal2ChannelIdD | read-write | current | The CID of the AAL2 connection transporting the D channel of this ISDN BRI port over the AAL2 VCC. The default value of this object is determined by the formul… |
| 1.3.6.1.4.1.353.5.10.1.1.4.1.4 | Columnaal2ChannelIdB1 | read-write | current | The CID of the AAL2 connection transporting the B1 channel of this ISDN BRI port over the AAL2 VCC. The default value of this object is determined by the formu… |
| 1.3.6.1.4.1.353.5.10.1.1.4.1.5 | Columnaal2ChannelIdB2 | read-write | current | The CID of the AAL2 connection transporting the B2 channel of this ISDN BRI port over the AAL2 VCC. The default value of this object is determined by the formu… |
| 1.3.6.1.4.1.353.5.10.1.1.4.1.6 | ColumnisdnBriPortLabel | read-write | current | Label assigned by service provider to identify this CP-IWF port. For example, may be used to hold Directory Number. |
| 1.3.6.1.4.1.353.5.10.1.1.4.1.7 | ColumnisdnBriPortTestType | read-write | current | This object is used to specify the type of test to run for ISDN-BRI ports. There are no results stored locally for a loopback test. Loopback of the whole ISDN-… |
| 1.3.6.1.4.1.353.5.10.1.1.6 | NodecpIwfAal2Stats | |||
| 1.3.6.1.4.1.353.5.10.1.1.6.1 | Scalaraal2CpsInPkts | read-only | current | Number of CPS packets received |
| 1.3.6.1.4.1.353.5.10.1.1.6.2 | Scalaraal2CpsOutPkts | read-only | current | Number of CPS packets transmitted |
| 1.3.6.1.4.1.353.5.10.1.1.6.3 | Scalaraal2CpsParityErrors | read-only | current | Number of errors encountered as specified in Table 6/I.363.2 (errnum = 0) |
| 1.3.6.1.4.1.353.5.10.1.1.6.4 | Scalaraal2CpsSeqNumErrors | read-only | current | Number of errors encountered as specified in Table 6/I.363.2 (errnum = 1) |
| 1.3.6.1.4.1.353.5.10.1.1.6.5 | Scalaraal2CpsOsfMismatchErrors | read-only | current | Number of errors encountered as specified in Table 6/I.363.2 (errnum = 2) |
| 1.3.6.1.4.1.353.5.10.1.1.6.6 | Scalaraal2CpsOsfErrors | read-only | current | Number of errors encountered as specified in Table 6/I.363.2 (errnum = 3) |
| 1.3.6.1.4.1.353.5.10.1.1.6.7 | Scalaraal2CpsHecErrors | read-only | current | Number of errors encountered as specified in Table 6/I.363.2 (errnum = 4) |
| 1.3.6.1.4.1.353.5.10.1.1.6.8 | Scalaraal2CpsOversizedSduErrors | read-only | current | Number of errors encountered as specified in Table 6/I.363.2 (errnum = 5) |
| 1.3.6.1.4.1.353.5.10.1.1.6.9 | Scalaraal2CpsReassemblyErrors | read-only | current | Number of errors encountered as specified in Table 6/I.363.2 (errnum = 6) |
| 1.3.6.1.4.1.353.5.10.1.1.6.10 | Scalaraal2CpsHecOverlapErrors | read-only | current | Number of errors encountered as specified in Table 6/I.363.2 (errnum = 7) |
| 1.3.6.1.4.1.353.5.10.1.1.6.11 | Scalaraal2CpsUuiErrors | read-only | current | Number of errors encountered as specified in Table 6/I.363.2 (errnum = 8) |
| 1.3.6.1.4.1.353.5.10.1.1.6.12 | Scalaraal2CpsCidErrors | read-only | current | Number of errors encountered as specified in Table 6/I.363.2 (errnum = 9) |
| 1.3.6.1.4.1.353.5.10.1.1.6.13 | Scalaraal2SscsOversizedSssarSduErrors | read-only | current | Number of errors encountered as specified in Table 3/I.366.1 (errnum = 10) |
| 1.3.6.1.4.1.353.5.10.1.1.6.14 | Scalaraal2SscsSssarRasTimerExpiryErrors | read-only | current | Number of errors encountered as specified in Table 3/I.366.1 (errnum = 11) |
| 1.3.6.1.4.1.353.5.10.1.1.6.15 | Scalaraal2SscsUndersizedSstedPduErrors | read-only | current | Number of errors encountered as specified in Table 5/I.366.1 (errnum = 20) |
| 1.3.6.1.4.1.353.5.10.1.1.6.16 | Scalaraal2SscsSstedPduLengthMismatchErrors | read-only | current | Number of errors encountered as specified in Table 5/I.366.1 (errnum = 21) |
| 1.3.6.1.4.1.353.5.10.1.1.6.17 | Scalaraal2SscsSstedCrcMismatchErrors | read-only | current | Number of errors encountered as specified in Table 5/I.366.1 (errnum = 22) |
| 1.3.6.1.4.1.353.5.10.1.1.7 | TablecpIwfPotsPortStatsTable | not-accessible | current | This table contains performance statistics pertinent to POTS ports respectively in addition to the information contained in the ifTable about the physical inte… |
| 1.3.6.1.4.1.353.5.10.1.1.7.1 | RowcpIwfPotsPortStatsEntry | not-accessible | current | An entry in the cpIwfPotsPortStatsTable that represents statistics for a single POTS port. |
| 1.3.6.1.4.1.353.5.10.1.1.7.1.1 | ColumncpIwfPotsPortActiveSeconds | read-only | current | Total length of time the AAL2 channel associated with this port has been active, in seconds. |
| 1.3.6.1.4.1.353.5.10.1.1.7.1.2 | ColumncpIwfPotsPortFillerOctets | read-only | current | Total number of PCM filler octets injected into active media stream on this port due to playout buffer underflow. |
| 1.3.6.1.4.1.353.5.10.1.1.7.1.3 | ColumncpIwfPotsPortDroppedOctets | read-only | current | Total number of PCM payload octets dropped due to buffer overflow at this port. Octets that are dropped because they arrived late, and which have already been … |
| 1.3.6.1.4.1.353.5.10.1.1.8 | TablecpIwfIsdnBriPortStatsTable | not-accessible | current | This table contains performance statistics pertinent to ISDN BRI ports respectively in addition to the information contained in the ifTable about the physical … |
| 1.3.6.1.4.1.353.5.10.1.1.8.1 | RowcpIwfIsdnBriPortStatsEntry | not-accessible | current | An entry in the cpIwfIsdnBriPortStatsTable that represents statistics for a single ISDN BRI port. |
| 1.3.6.1.4.1.353.5.10.1.1.8.1.1 | ColumncpIwfIsdnBriPortB1ActiveSeconds | read-only | current | Total length of time the AAL2 channel associated with this port/channel has been active, in seconds. |
| 1.3.6.1.4.1.353.5.10.1.1.8.1.2 | ColumncpIwfIsdnBriPortB1FillerOctets | read-only | current | Total number of PCM filler octets injected into active media stream on this port/channel due to playout buffer underflow. |
| 1.3.6.1.4.1.353.5.10.1.1.8.1.3 | ColumncpIwfIsdnBriPortB1DroppedOctets | read-only | current | Total number of PCM payload octets dropped due to buffer overflow on this port/channel. Octets that are dropped because they arrived late, and which have alrea… |
| 1.3.6.1.4.1.353.5.10.1.1.8.1.4 | ColumncpIwfIsdnBriPortB2ActiveSeconds | read-only | current | Total length of time the AAL2 channel associated with this port/channel has been active, in seconds. |
| 1.3.6.1.4.1.353.5.10.1.1.8.1.5 | ColumncpIwfIsdnBriPortB2FillerOctets | read-only | current | Total number of PCM filler octets injected into active media stream on this port/channel due to playout buffer underflow. |
| 1.3.6.1.4.1.353.5.10.1.1.8.1.6 | ColumncpIwfIsdnBriPortB2DroppedOctets | read-only | current | Total number of PCM payload octets dropped due to buffer overflow on this port/channel. Octets that are dropped because they arrived late, and which have alrea… |
| 1.3.6.1.4.1.353.5.10.1.1.9 | ScalarcpIwfUpstreamPhysicalBandwidth | read-create | current | This object defines the new physical bandwidth in the upstream direction of the CP-IWF. |
| 1.3.6.1.4.1.353.5.10.1.1.10 | ScalarcpIwfDownstreamPhysicalBandwidth | read-create | current | This object defines the new physical bandwidth in the downstream direction of the CP-IWF. |
| 1.3.6.1.4.1.353.5.10.1.1.11 | ScalarcpIwfImpairmentPortType | read-create | current | This object is used within the cpIwfExcessImpairment Trap and identifies the type of the CP-IWF port on which the excess impairments event occurred. |
| 1.3.6.1.4.1.353.5.10.1.1.12 | ScalarcpIwfPortNumber | read-create | current | This object is used within traps to identify the port number to which the trap refers. The range of values this object can take is dependent on port type and i… |
| 1.3.6.1.4.1.353.5.10.1.2 | NodecpIwfMIBNotifications | |||
| 1.3.6.1.4.1.353.5.10.1.2.0 | NodecpIwfMIBNotificationPrefix | |||
| 1.3.6.1.4.1.353.5.10.1.2.0.1 | NotificationcpIwfInsufficientPhysicalBandwidth | current | This trap is generated when the physical layer bandwidth in either direction drops below the currently configured AAL2 VCC bandwidth. | |
| 1.3.6.1.4.1.353.5.10.1.2.0.2 | NotificationcpIwfExcessImpairment | current | This trap is generated when the number of impairments on any POTS port or ISDN BRI port/channel, measured as the sum of fillerOctets and droppedOctets on that … | |
| 1.3.6.1.4.1.353.5.10.1.3 | NodecpIwfMIBConformance | |||
| 1.3.6.1.4.1.353.5.10.1.3.1 | NodecpIwfMIBCompliances | |||
| 1.3.6.1.4.1.353.5.10.1.3.1.1 | CompliancecpIwfMIBCompliance | current | The compliance statement for SNMP entities that support LES as specified in af-vmoa-0145.000 of the ATM Forum. Note the Trap types and associated MIB objects d… | |
| 1.3.6.1.4.1.353.5.10.1.3.2 | NodecpIwfMIBGroups | |||
| 1.3.6.1.4.1.353.5.10.1.3.2.1 | GroupcpIwfGeneralGroup | current | A collection of objects required to manage the CP-IWF as a whole | |
| 1.3.6.1.4.1.353.5.10.1.3.2.2 | GroupcpIwfAal2ConfigGroup | current | A collection of objects describing the configuration of the AAL2 layer specific to LES | |
| 1.3.6.1.4.1.353.5.10.1.3.2.3 | GroupcpIwfPotsPortConfigGroup | current | A collection of objects describing the configuration of the POTS ports on a CP-IWF. | |
| 1.3.6.1.4.1.353.5.10.1.3.2.4 | GroupcpIwfIsdnBriPortConfigGroup | current | A collection of objects describing the configuration of the ISDN BRI ports on a CP-IWF. | |
| 1.3.6.1.4.1.353.5.10.1.3.2.5 | GroupcpIwfPotsPortCidConfigGroup | current | Object describing the static CID allocation to a user-side POTS termination. This object is required when ELCP is not used as a mechanism for CID allocation. | |
| 1.3.6.1.4.1.353.5.10.1.3.2.6 | GroupcpIwfIsdnBriPortCidConfigGroup | current | A collection of objects describing the static CID allocations to the D, B1 and B2 channels of a user-side ISDN-BRI termination. These objects are required when… | |
| 1.3.6.1.4.1.353.5.10.1.3.2.7 | GroupcpIwfAal2StatsGroup | current | These objects provide statistics on the AAL2 layer | |
| 1.3.6.1.4.1.353.5.10.1.3.2.8 | GroupcpIwfPotsPortStatsGroup | current | These objects provide statistics on the POTS ports | |
| 1.3.6.1.4.1.353.5.10.1.3.2.9 | GroupcpIwfIsdnBriPortStatsGroup | current | These objects provide statistics on the ISDN BRI ports | |
| 1.3.6.1.4.1.353.5.10.1.3.2.10 | GroupcpIwfElcpPstnGroup | current | Objects for setting the V5 PSTN protocol variant and the maximum bandwidth to be used for transmission of PSTN or ELCP messages. | |
| 1.3.6.1.4.1.353.5.10.1.3.2.11 | GroupcpIwfPlayoutBufferGroup | current | A collection of objects used for configuring the playout buffer depth and to detect impairments to do incorrect setting of this buffer depth. | |
| 1.3.6.1.4.1.353.5.10.1.3.2.12 | GroupcpIwfNotificationsGroup | current | The notification(s) which a CP-IWF is required to implement | |
| 1.3.6.1.4.1.353.5.10.1.3.2.13 | GroupcpIwfImpairmentNotificationsGroup | current | This group specifies the notification used to inform the CO-IWF of impairments due to incorrect playout buffer depth, or corruption or loss of AAL2 packets by … |