CROSSSTREAM-MIB
148 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | enterprises IpAddress |
| RFC1213-MIB | DisplayString ifIndex |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4962 | Nodeartel | |||
| 1.3.6.1.4.1.4962.1 | Nodecommon | |||
| 1.3.6.1.4.1.4962.1.1 | Nodedevice | |||
| 1.3.6.1.4.1.4962.1.1.1 | ScalardeviceName | read-only | mandatory | Name of the Artel's Product |
| 1.3.6.1.4.1.4962.1.1.2 | ScalardeviceSerialNum | read-only | mandatory | Serial number of the device. |
| 1.3.6.1.4.1.4962.1.1.3 | ScalardeviceModelNum | read-only | mandatory | Model Number of the device. |
| 1.3.6.1.4.1.4962.1.1.4 | ScalardeviceFwVer | read-only | mandatory | Firmware version of the product in major.minor form |
| 1.3.6.1.4.1.4962.1.1.5 | ScalardeviceHwVer | read-only | mandatory | Hardware version of the product in major.minor form |
| 1.3.6.1.4.1.4962.1.1.6 | ScalardeviceTime | read-write | mandatory | The current time as measured by the device. The time is specified as YYYYMMDDHHMM, where YYYY - four digits of the year MM - month (01 through 12) DD - day of … |
| 1.3.6.1.4.1.4962.1.1.7 | ScalardeviceUpTime | read-only | mandatory | The time when the device is intialized. The time is specified as YYYYMMDDHHMM, where YYYY - four digits of the year MM - month (01 through 12) DD - day of mont… |
| 1.3.6.1.4.1.4962.1.1.8 | ScalardeviceIpAddress | read-write | mandatory | This object returns the current IP address of the device when read and modifies the IP address to the new value when set. |
| 1.3.6.1.4.1.4962.1.1.9 | ScalardeviceIpNetmask | read-write | mandatory | This object returns the netmask of the interface when read and modifies the netmask when set. |
| 1.3.6.1.4.1.4962.1.1.10 | ScalardeviceGwAddress | read-write | mandatory | This object returns the default gateway address of the device when read and modifies the default gateway when set. |
| 1.3.6.1.4.1.4962.1.1.11 | ScalardeviceHostAddress | read-write | mandatory | This object has the host (TFTP) server ip address which is used for software upgrade. |
| 1.3.6.1.4.1.4962.1.1.12 | ScalardeviceReset | read-write | mandatory | Always returns '0' when read and resets the device when set with a nonzero value |
| 1.3.6.1.4.1.4962.2 | Nodeproducts | |||
| 1.3.6.1.4.1.4962.2.1 | NodecrossStream | |||
| 1.3.6.1.4.1.4962.2.1.1 | NodecstrmControl | |||
| 1.3.6.1.4.1.4962.2.1.1.1 | ScalarvsarReset | read-write | mandatory | Setting this object to 1 resets the VSAR chip and initializes the VSAR control structures by reading from NVRAM. |
| 1.3.6.1.4.1.4962.2.1.1.2 | TablevsarConfigTable | not-accessible | mandatory | This table contains a list of configuration entries which can be loaded to VSAR chip or store current configuration to non volatile memory. |
| 1.3.6.1.4.1.4962.2.1.1.2.1 | RowvsarConfigEntry | not-accessible | mandatory | This entry contains configurationType, action specifying load/ store. |
| 1.3.6.1.4.1.4962.2.1.1.2.1.1 | ColumnvsarConfigIndex | read-only | mandatory | The index which points to the different VSAR configurations. |
| 1.3.6.1.4.1.4962.2.1.1.2.1.2 | ColumnvsarConfigType | read-only | mandatory | Configuration type can specify NVRAM configuration, Flash configuration etc. |
| 1.3.6.1.4.1.4962.2.1.1.2.1.4 | ColumnvsarConfigAction | read-write | mandatory | This specifies the action to be peformed on the configuration entry. When set is given with 'load' as action the device is loaded with the specified configurat… |
| 1.3.6.1.4.1.4962.2.1.2 | NodecstrmInfo | |||
| 1.3.6.1.4.1.4962.2.1.2.1 | ScalarusedAtmStreamsNumber | read-only | mandatory | Currently used number of total available Tranport streams. This includes active and inactive streams |
| 1.3.6.1.4.1.4962.2.1.2.2 | ScalaractiveAtmStreamsNumber | read-only | mandatory | Active Number of Transport Streams running in the system |
| 1.3.6.1.4.1.4962.2.1.2.3 | ScalarmaxAtmStreamsNumber | read-only | mandatory | Max number of available Transport Streams available in the system |
| 1.3.6.1.4.1.4962.2.1.2.4 | ScalarusedAsiStreamsNumber | read-only | mandatory | Currently used number of total available ASI Tranport streams. This includes active and inactive streams |
| 1.3.6.1.4.1.4962.2.1.2.5 | ScalaractiveAsiStreamsNumber | read-only | mandatory | Active Number of ASI Transport Streams running in the system |
| 1.3.6.1.4.1.4962.2.1.2.6 | ScalarmaxAsiStreamsNumber | read-only | mandatory | Max number of available ASI Transport Streams available in the system |
| 1.3.6.1.4.1.4962.2.1.2.7 | ScalarusedProgsNumber | read-only | mandatory | Currently used number of programs. This includes active and inactive programs |
| 1.3.6.1.4.1.4962.2.1.2.8 | ScalaractiveProgsNumber | read-only | mandatory | Active number of programs running in the system |
| 1.3.6.1.4.1.4962.2.1.2.9 | ScalarmaxProgsNumber | read-only | mandatory | Max number of programs available in the system |
| 1.3.6.1.4.1.4962.2.1.2.10 | ScalarusedPidsNumber | read-only | mandatory | Currently used number of total available PIDs. This includes active and inactive PIDs |
| 1.3.6.1.4.1.4962.2.1.2.11 | ScalaractivePidsNumber | read-only | mandatory | Active number of PIDs running in the system |
| 1.3.6.1.4.1.4962.2.1.2.12 | ScalarmaxPidsNumber | read-only | mandatory | Max number of available PIDs in the system |
| 1.3.6.1.4.1.4962.2.1.2.13 | ScalarusedConnectionsNumber | read-only | mandatory | Currently used number of total available connection objects. |
| 1.3.6.1.4.1.4962.2.1.2.14 | ScalarmaxConnectionsNumber | read-only | mandatory | Max number of available connection objects. |
| 1.3.6.1.4.1.4962.2.1.3 | NodecstrmEvents | |||
| 1.3.6.1.4.1.4962.2.1.3.1 | NodecstrmOverTemp | A cstrmOverTemp trap signifies that one or more of the temperature sensors has exceeded its high threshhold level. The values of the 4 temperature sensors are … | ||
| 1.3.6.1.4.1.4962.2.1.3.2 | NodecstrmCoolFail | A cstrmCoolFail trap signifies that a cooling system failure has occured. | ||
| 1.3.6.1.4.1.4962.2.1.3.3 | NodecstrmPowerMonitor | A cstrmPowerMonitor trap signifies that one or more of the voltage sensors is out of acceptable range. The values of the 3 voltage sensors are sent in 100ths o… | ||
| 1.3.6.1.4.1.4962.2.1.3.4 | NodecstrmATMPhyTrap | |||
| 1.3.6.1.4.1.4962.2.1.3.5 | NodecstrmOAMVPTrap | |||
| 1.3.6.1.4.1.4962.2.1.3.6 | NodecstrmOAMVCTrap | |||
| 1.3.6.1.4.1.4962.2.1.3.7 | NodecstrmSONETTrap | |||
| 1.3.6.1.4.1.4962.2.1.3.8 | NodecstrmActDeActTrap | This Trap is generated for each of Activate and Deactivate event Alarm. | ||
| 1.3.6.1.4.1.4962.2.1.3.9 | NodecstrmIngressPidsChangedTrap | This Trap is generated for each of Activate and Deactivate event Alarm. | ||
| 1.3.6.1.4.1.4962.2.1.4 | NodecstrmDiags | |||
| 1.3.6.1.4.1.4962.2.1.4.1 | ScalarcstrmAirTemp | read-only | mandatory | The ambient temperature in degrees Centigrade at the center of the main logic board. |
| 1.3.6.1.4.1.4962.2.1.4.2 | ScalarcstrmCoreRegTemp | read-only | mandatory | The case temperature in degrees Centigrade of the Core 5 volt voltage regulator I.C. |
| 1.3.6.1.4.1.4962.2.1.4.3 | Scalarcstrm3VRegTemp | read-only | mandatory | The case temperature in degrees Centigrade of the 3.3 volt voltage regulator I.C. |
| 1.3.6.1.4.1.4962.2.1.4.4 | ScalarcstrmHotICTemp | read-only | mandatory | The case temperature in degrees Centigrade of the designated hottest I.C. on the main board. |
| 1.3.6.1.4.1.4962.2.1.4.5 | Scalarcstrm5VCoreVoltage | read-only | mandatory | The voltage in 1/100ths of a volt of the 5 volt core regulator. |
| 1.3.6.1.4.1.4962.2.1.4.6 | Scalarcstrm3VCoreVoltage | read-only | mandatory | The voltage in 1/100ths of a volt of the 3.3 volt core regulator. |
| 1.3.6.1.4.1.4962.2.1.4.7 | Scalarcstrm3VIOVoltage | read-only | mandatory | The voltage in 1/100ths of a volt of the 3.3 volt I/O regulator. |
| 1.3.6.1.4.1.4962.2.1.5 | NodecstrmStreamGroup | |||
| 1.3.6.1.4.1.4962.2.1.5.1 | ScalarstreamNextIndex | read-only | mandatory | To create a new entry in streamTable, management station has to first get this object value. The value 0 indicates that no assigned values are available. After… |
| 1.3.6.1.4.1.4962.2.1.5.2 | TablestreamTable | not-accessible | mandatory | A list of stream entries. An entry specifies the stream type, name and direction. It doesn't included stream specific parameters. |
| 1.3.6.1.4.1.4962.2.1.5.2.1 | RowstreamEntry | not-accessible | mandatory | An entry in the stream table. This entry is used to specify the stream type, stream direction and stream status. |
| 1.3.6.1.4.1.4962.2.1.5.2.1.1 | ColumnstreamIndex | read-only | mandatory | A unique integer handle that identifies a stream. |
| 1.3.6.1.4.1.4962.2.1.5.2.1.2 | ColumningressState | read-write | mandatory | This object specifies the status of the stream in ingress direction. The ingressState can be set to only 'inactive' by the management station. It is automatica… |
| 1.3.6.1.4.1.4962.2.1.5.2.1.3 | ColumnegressState | read-write | mandatory | This object specifies the status of the stream in egress direction. |
| 1.3.6.1.4.1.4962.2.1.5.2.1.4 | ColumnstreamType | read-write | mandatory | This object specifies the type of the stream. |
| 1.3.6.1.4.1.4962.2.1.5.2.1.5 | ColumnstreamName | read-write | mandatory | This object specifies the name of the stream. |
| 1.3.6.1.4.1.4962.2.1.5.2.1.6 | ColumnstreamStatus | read-write | mandatory | This object specifies the status of stream entry. |
| 1.3.6.1.4.1.4962.2.1.5.3 | TableingressStreamTable | not-accessible | mandatory | This table contains ingress stream configuration parameters, one entry per streamTable for which streamDirection is ingress. |
| 1.3.6.1.4.1.4962.2.1.5.3.1 | RowingressStreamEntry | not-accessible | mandatory | An ingress entry specifies the cell rate of the stream. |
| 1.3.6.1.4.1.4962.2.1.5.3.1.1 | ColumningressStreamCellRate | read-write | mandatory | Specifies the cellrate of the ingress stream. |
| 1.3.6.1.4.1.4962.2.1.5.4 | TableegressStreamTable | not-accessible | mandatory | This table contains egress stream configuration parameters, one entry per streamTable for which streamDirection is egress. |
| 1.3.6.1.4.1.4962.2.1.5.4.1 | RowegressStreamEntry | not-accessible | mandatory | An egress entry specifies the transport stream rate, buffer control parameters, elasticity table parameters, divisor for center rate of elasticity window. |
| 1.3.6.1.4.1.4962.2.1.5.4.1.1 | ColumnegressStreamTsRate | read-write | mandatory | Transport rate for this egress stream. |
| 1.3.6.1.4.1.4962.2.1.5.4.1.2 | ColumnegressStreamNumBufs | read-write | mandatory | Number of buffers to be allocated for this egress stream. Setting this '0' to will deallocate the memory. Modify this value to change the number of buffers fro… |
| 1.3.6.1.4.1.4962.2.1.5.4.1.3 | ColumnegressStreamBufThreshold | read-write | mandatory | Specifies the uniform dealy threshold for this egress stream. |
| 1.3.6.1.4.1.4962.2.1.5.4.1.4 | ColumnegressStreamBufSize | read-write | mandatory | Size of each buffer allocated in egress pool. |
| 1.3.6.1.4.1.4962.2.1.5.4.1.5 | ColumnegressStreamJitter | read-write | mandatory | Enable/disable Jitter Attenuation for this egress stream. |
| 1.3.6.1.4.1.4962.2.1.5.5 | TableatmStreamTable | not-accessible | mandatory | This table contains ATM stream configuration parameters, one entry per streamTable for which streamType is ATM. |
| 1.3.6.1.4.1.4962.2.1.5.5.1 | RowatmStreamEntry | not-accessible | mandatory | An ATM Transport Stream entry contains vpi and vci |
| 1.3.6.1.4.1.4962.2.1.5.5.1.1 | ColumnatmStreamVpi | read-write | mandatory | VPI associated with the ATM Stream |
| 1.3.6.1.4.1.4962.2.1.5.5.1.2 | ColumnatmStreamVci | read-write | mandatory | VCI associated with the VCB. |
| 1.3.6.1.4.1.4962.2.1.5.6 | TableasiStreamTable | not-accessible | mandatory | This table contians ASI stream configuration parameters, one entry per streamTable for which streamType is ASI. |
| 1.3.6.1.4.1.4962.2.1.5.6.1 | RowasiStreamEntry | not-accessible | mandatory | An ASI Transport stream entry specifies the port number. |
| 1.3.6.1.4.1.4962.2.1.5.6.1.1 | ColumnasiStreamPort | read-write | mandatory | Physical port number of the ASI stream. |
| 1.3.6.1.4.1.4962.2.1.5.6.1.2 | ColumnasiStreamChannel | read-write | mandatory | Channel associated with this ASI stream. |
| 1.3.6.1.4.1.4962.2.1.5.7 | TableprogNextTable | not-accessible | mandatory | To create a new entry in progTable, management station has to first get next program index. |
| 1.3.6.1.4.1.4962.2.1.5.7.1 | RowprogNextEntry | not-accessible | mandatory | This entry contains next program index that can by used by the management stations to add a program in a stream. |
| 1.3.6.1.4.1.4962.2.1.5.7.1.1 | ColumnprogNextIndex | read-only | mandatory | Returns an index that can be associated with the given stream. The value '0' indicates that no assigned values are available. After each retrieval operation fr… |
| 1.3.6.1.4.1.4962.2.1.5.8 | TableprogTable | not-accessible | mandatory | A list of programs linked to one VCB. The number of entries is given by numProgs. |
| 1.3.6.1.4.1.4962.2.1.5.8.1 | RowprogEntry | not-accessible | mandatory | progEntry contains program number, program name, TS rate, TS len. |
| 1.3.6.1.4.1.4962.2.1.5.8.1.1 | ColumnprogIndex | read-only | mandatory | A unique handle which identies a program. |
| 1.3.6.1.4.1.4962.2.1.5.8.1.2 | ColumnprogNumber | read-write | mandatory | Program number which identifies a program in a VCB. |
| 1.3.6.1.4.1.4962.2.1.5.8.1.3 | ColumnprogName | read-write | mandatory | Human readable program name corresponding to the program number of this entry. |
| 1.3.6.1.4.1.4962.2.1.5.8.1.4 | ColumnprogTsRate | read-write | mandatory | Aggregate tranport rate of the program. |
| 1.3.6.1.4.1.4962.2.1.5.8.1.5 | ColumnprogTsLen | read-write | mandatory | Length of the transport stream packet. |
| 1.3.6.1.4.1.4962.2.1.5.8.1.6 | ColumnprogStatus | read-write | mandatory | Status of this program associated with the VCB. |
| 1.3.6.1.4.1.4962.2.1.5.9 | TablepidNextTable | not-accessible | mandatory | To create a new entry pidTable, management stations has to first retrieve a next available pid index. |
| 1.3.6.1.4.1.4962.2.1.5.9.1 | RowpidNextEntry | not-accessible | mandatory | This entry contains next pid index that can by used by the mangement stations to add a pid to the given stream and program. |
| 1.3.6.1.4.1.4962.2.1.5.9.1.1 | ColumnpidNextIndex | read-only | mandatory | Returns an index that can be associated with the given stream and program. The value '0' indicates taht no assigned values are available. After each retrieval … |
| 1.3.6.1.4.1.4962.2.1.5.10 | TablepidTable | not-accessible | mandatory | List of pids linked to one program. The number of entries is given by numPIDs. |
| 1.3.6.1.4.1.4962.2.1.5.10.1 | RowpidEntry | not-accessible | mandatory | pidEntry contains pid number, remap pid number, table identifier, pid transport rate. |
| 1.3.6.1.4.1.4962.2.1.5.10.1.1 | ColumnpidIndex | read-only | mandatory | A unique integer pid Handle identifying a PID. |
| 1.3.6.1.4.1.4962.2.1.5.10.1.2 | ColumnpidNumber | read-write | mandatory | pid number which uniquely identifies a PID in a program. |
| 1.3.6.1.4.1.4962.2.1.5.10.1.3 | ColumnpidTableID | read-write | mandatory | table type identifier of this PID. This is 0 - Program Association Table 1 - Program MAP Table 2 - PCR PID >2 - Check the manual. |
| 1.3.6.1.4.1.4962.2.1.5.10.1.4 | ColumnpidRate | read-write | mandatory | Tranport rate of a specific PID. |
| 1.3.6.1.4.1.4962.2.1.5.10.1.5 | ColumnpidStatus | read-write | mandatory | The status of this PID. |
| 1.3.6.1.4.1.4962.2.1.5.11 | ScalarcstrmConnNextIndex | read-only | mandatory | Returns the next free Index in the connection table. |
| 1.3.6.1.4.1.4962.2.1.5.12 | TablecstrmConnTable | not-accessible | mandatory | A list of Dipersal Entries.. |
| 1.3.6.1.4.1.4962.2.1.5.12.1 | RowcstrmConnEntry | not-accessible | mandatory | An cstrmConnEntry contains source program, source pid, dest program dest pid and asiStreamIndex values. This is the entry through which management station conn… |
| 1.3.6.1.4.1.4962.2.1.5.12.1.1 | ColumncstrmConnIndex | read-only | mandatory | Index to identify a Connection Table. |
| 1.3.6.1.4.1.4962.2.1.5.12.1.2 | ColumningressStreamIndexVal | read-write | mandatory | Index of the ingress stream. |
| 1.3.6.1.4.1.4962.2.1.5.12.1.3 | ColumnegressStreamIndexVal | read-write | mandatory | Index of the egress stream |
| 1.3.6.1.4.1.4962.2.1.5.12.1.4 | ColumningressProgIndex | read-write | mandatory | Source program number associated with the connection table. Source program number is linked to an ingress stream. A value of 'zero' indicates that all programs… |
| 1.3.6.1.4.1.4962.2.1.5.12.1.5 | ColumningressPidIndex | read-write | mandatory | Source PID number associated with the connection table. Source PID number is linked to an ingress stream. A value of 'zero' indicates that all pids in the pare… |
| 1.3.6.1.4.1.4962.2.1.5.12.1.6 | ColumnegressProgNum | read-write | mandatory | Destination program number associated with the connection table. Destination program number is linked to an egress stream. |
| 1.3.6.1.4.1.4962.2.1.5.12.1.7 | ColumnegressPidNum | read-write | mandatory | Destination PID number associated with the connection table. Destination PID number is linked to an egress stream. |
| 1.3.6.1.4.1.4962.2.1.5.12.1.8 | ColumnpcrAdjust | read-write | mandatory | Enable/Disable PCR Time Stamp Adjustment for this connection. |
| 1.3.6.1.4.1.4962.2.1.5.12.1.9 | ColumncstrmConnStatus | read-write | mandatory | Status of the this connection table. |
| 1.3.6.1.4.1.4962.2.1.5.13 | TableconnectionStreamTable | not-accessible | mandatory | Connection Stream table is used to traverse the stream connections. |
| 1.3.6.1.4.1.4962.2.1.5.13.1 | RowconnectionStreamEntry | not-accessible | mandatory | This entry has the connection index for the associated stream. If the ConnectionIndex is zero, connectionStreamIndex will return first connection object for th… |
| 1.3.6.1.4.1.4962.2.1.5.13.1.1 | ColumnconnectionStreamIndex | read-only | mandatory | Returns an active connection object index connected to/from the given stream index. |
| 1.3.6.1.4.1.4962.2.1.5.14 | TableconnectionProgTable | not-accessible | mandatory | Connection Prog table is used to traverse the program connections. |
| 1.3.6.1.4.1.4962.2.1.5.14.1 | RowconnectionProgEntry | not-accessible | mandatory | This entry has the connection index for the given program in the specified stream object. If the ConnectionIndex is zero, connectionProgIndex will return first… |
| 1.3.6.1.4.1.4962.2.1.5.14.1.1 | ColumnconnectionProgIndex | read-only | mandatory | Returns an active connection object index connected to/from the given program index. |
| 1.3.6.1.4.1.4962.2.1.5.15 | TableconnectionPidTable | not-accessible | mandatory | Connection pid table is used to traverse the pid connections. |
| 1.3.6.1.4.1.4962.2.1.5.15.1 | RowconnectionPidEntry | not-accessible | mandatory | This entry has the connection index for the given pid in the specified program & stream object. If the ConnectionIndex is zero, connectionPidIndex will return … |
| 1.3.6.1.4.1.4962.2.1.5.15.1.1 | ColumnconnectionPidIndex | read-only | mandatory | Returns an active connection object index connected to/from the given pid index. |
| 1.3.6.1.4.1.4962.2.1.6 | NodecstrmStreamPrivate | |||
| 1.3.6.1.4.1.4962.2.1.6.1 | ScalarcstrmATMPhyTrapID | not-accessible | mandatory | |
| 1.3.6.1.4.1.4962.2.1.6.1.1 | ScalarcstrmATMPhyTrapStatus | not-accessible | mandatory | |
| 1.3.6.1.4.1.4962.2.1.6.2 | ScalarcstrmOAMVCTrapID | not-accessible | mandatory | |
| 1.3.6.1.4.1.4962.2.1.6.2.1 | ScalarcstrmOAMVCTrapStatus | not-accessible | mandatory | |
| 1.3.6.1.4.1.4962.2.1.6.3 | ScalarcstrmOAMVPTrapID | not-accessible | mandatory | |
| 1.3.6.1.4.1.4962.2.1.6.3.1 | ScalarcstrmOAMVPTrapStatus | not-accessible | mandatory | |
| 1.3.6.1.4.1.4962.2.1.6.4 | ScalarcstrmSONETTrapID | not-accessible | mandatory | |
| 1.3.6.1.4.1.4962.2.1.6.4.1 | ScalarcstrmSONETTrapStatus | not-accessible | mandatory | |
| 1.3.6.1.4.1.4962.2.1.6.5 | ScalarcstrmActDeActTrapID | not-accessible | mandatory | |
| 1.3.6.1.4.1.4962.2.1.6.5.1 | ScalarcstrmActDeActTrapStatus | not-accessible | mandatory | |
| 1.3.6.1.4.1.4962.2.1.6.6 | ScalarcstrmIngressPidsChangedTrapID | not-accessible | mandatory | |
| 1.3.6.1.4.1.4962.2.1.6.6.1 | ScalarcstrmIngressPidsChangedTrapStatus | not-accessible | mandatory |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ConnectionIndex | INTEGER | ||
| ConnectionStatus | INTEGER { | ||
| PidIndex | INTEGER | ||
| ProgIndex | INTEGER | ||
| StreamDirection | INTEGER { ingress(1), egress(2) } | ||
| StreamIndex | INTEGER | ||
| StreamState | INTEGER { active(1), inactive(2) } | ||
| StreamType | INTEGER { atm(1), asi(2), ethernet(3) } |