Centrum-MIB
625 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises IpAddress |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.327 | Nodecentrum | |||
| 1.3.6.1.4.1.327.1 | NodemibDoc | |||
| 1.3.6.1.4.1.327.1.1 | NodecentrumRemote | |||
| 1.3.6.1.4.1.327.1.1.1 | Nodeport | |||
| 1.3.6.1.4.1.327.1.1.1.1 | ScalarportNumber | read-only | mandatory | The number of communication ports (not including console port) on this system. |
| 1.3.6.1.4.1.327.1.1.1.2 | TableportTable | not-accessible | mandatory | Remote PC access path table. |
| 1.3.6.1.4.1.327.1.1.1.2.1 | RowportEntry | not-accessible | mandatory | A path to a remote PC. |
| 1.3.6.1.4.1.327.1.1.1.2.1.1 | ColumnportIndex | read-only | mandatory | A sequentially assigned index value for each communication port on this system. |
| 1.3.6.1.4.1.327.1.1.1.2.1.2 | ColumnportId | read-only | mandatory | The type of port. |
| 1.3.6.1.4.1.327.1.1.1.2.1.3 | ColumnportSlot | read-only | mandatory | The slot that this port is on. |
| 1.3.6.1.4.1.327.1.1.1.2.1.4 | ColumnportScriptIdx | read-write | mandatory | This index identifies the modem dial in/out script to be used by this async port. |
| 1.3.6.1.4.1.327.1.1.1.2.1.5 | ColumnportBaudrate | read-write | mandatory | Baudrate of this async/sync port. |
| 1.3.6.1.4.1.327.1.1.1.2.1.6 | ColumnportParity | read-write | mandatory | Parity of this async port. |
| 1.3.6.1.4.1.327.1.1.1.2.1.7 | ColumnportStopBits | read-write | mandatory | Number of stop bits for this async port. |
| 1.3.6.1.4.1.327.1.1.1.2.1.8 | ColumnportDataBits | read-write | mandatory | Number of data bits for this async port. |
| 1.3.6.1.4.1.327.1.1.1.2.1.9 | ColumnportCCSP | read-write | mandatory | Enable 3Com's proprietory data compression algorithm. |
| 1.3.6.1.4.1.327.1.1.1.2.1.10 | ColumnportPPPProbeInterval | read-write | mandatory | Time duration in seconds in between two consecutive PPP probing packets. |
| 1.3.6.1.4.1.327.1.1.1.2.1.11 | ColumnportPPPMaxRcvPacketLength | read-write | mandatory | Maximum data field length in bytes for PPP packets. |
| 1.3.6.1.4.1.327.1.1.1.2.1.12 | ColumnportPPPAsyncCtrlChar | read-write | mandatory | Async control character bit-map for PPP link. |
| 1.3.6.1.4.1.327.1.1.1.2.1.14 | ColumnportPPPProtCompress | read-write | mandatory | Enable protocol field compression for PPP packets. |
| 1.3.6.1.4.1.327.1.1.1.2.1.15 | ColumnportPPPACCompress | read-write | mandatory | Enable address and control field compression for PPP packets. |
| 1.3.6.1.4.1.327.1.1.1.2.1.16 | ColumnportCRCErrors | read-only | mandatory | Ethernet packets received with CRC error. |
| 1.3.6.1.4.1.327.1.1.1.2.1.17 | ColumnportOversizes | read-only | mandatory | Ethernet packets received with size bigger than 1500 bytes. |
| 1.3.6.1.4.1.327.1.1.1.2.1.18 | ColumnportUndersizes | read-only | mandatory | Ethernet packets received with size smaller than 64 bytes. |
| 1.3.6.1.4.1.327.1.1.1.2.1.19 | ColumnportCollisions | read-only | mandatory | Ethernet packet transmit failures due to collision. |
| 1.3.6.1.4.1.327.1.1.1.2.1.20 | ColumnportInPackets | read-only | mandatory | Packets received with no error. |
| 1.3.6.1.4.1.327.1.1.1.2.1.21 | ColumnportOutPackets | read-only | mandatory | Packets transmitted with no error. |
| 1.3.6.1.4.1.327.1.1.1.2.1.22 | ColumnportInBytes | read-only | mandatory | Bytes received with no error. |
| 1.3.6.1.4.1.327.1.1.1.2.1.23 | ColumnportOutBytes | read-only | mandatory | Bytes transmitted with no error. |
| 1.3.6.1.4.1.327.1.1.1.2.1.24 | ColumnportResetPortCounters | read-write | mandatory | Writing any value to this variable will reset all port-related counters to zero. |
| 1.3.6.1.4.1.327.1.1.1.2.1.25 | ColumnportAsyncParityErrors | read-only | mandatory | Number of async parity errors. |
| 1.3.6.1.4.1.327.1.1.1.2.1.26 | ColumnportAsyncCharFrameErrors | read-only | mandatory | Number of async character framing errors. |
| 1.3.6.1.4.1.327.1.1.1.2.1.27 | ColumnportAsyncOverrunErrors | read-only | mandatory | Number of async receive overrun errors. |
| 1.3.6.1.4.1.327.1.1.1.2.1.28 | ColumnportAsyncPktCksumErrors | read-only | mandatory | Number of async packet checksum errors. |
| 1.3.6.1.4.1.327.1.1.1.2.1.29 | ColumnportCTSState | read-only | mandatory | Current state CTS signal. |
| 1.3.6.1.4.1.327.1.1.1.2.1.30 | ColumnportDCDState | read-only | mandatory | Current state DCD signal. |
| 1.3.6.1.4.1.327.1.1.1.2.1.31 | ColumnportRIState | read-only | mandatory | Current state RI signal. |
| 1.3.6.1.4.1.327.1.1.1.2.1.32 | ColumnportSyncFcsErrors | read-only | mandatory | Number of sync packet FCS errors. |
| 1.3.6.1.4.1.327.1.1.1.2.1.33 | ColumnportSyncMemoryErrors | read-only | mandatory | Number of sync memory errors. |
| 1.3.6.1.4.1.327.1.1.1.2.1.34 | ColumnportSyncOverrunErrors | read-only | mandatory | Number of sync receive overrun errors. |
| 1.3.6.1.4.1.327.1.1.1.2.1.35 | ColumnportSyncUnderrunErrors | read-only | mandatory | Number of sync transmit underrun errors. |
| 1.3.6.1.4.1.327.1.1.1.2.1.36 | ColumnportIPCPState | read-only | mandatory | Current connection state of PPP IPCP. |
| 1.3.6.1.4.1.327.1.1.1.2.1.37 | ColumnportIPXCPState | read-only | mandatory | Current connection state of PPP IPXCP. |
| 1.3.6.1.4.1.327.1.1.1.2.1.38 | ColumnportBNCPState | read-only | mandatory | Current connection state of PPP BNCP. |
| 1.3.6.1.4.1.327.1.1.1.2.1.39 | ColumnportDriverState | read-only | mandatory | Current Token Ring interface state. |
| 1.3.6.1.4.1.327.1.1.1.2.1.40 | ColumnportSpeed | read-only | mandatory | Current Token Ring speed. |
| 1.3.6.1.4.1.327.1.1.1.2.1.41 | ColumnportTotalErrors | read-only | mandatory | Number of total interface errors. |
| 1.3.6.1.4.1.327.1.1.1.2.1.42 | ColumnportTransmitDiscards | read-only | mandatory | Number of packets dropped due to lack of buffers during transmit. |
| 1.3.6.1.4.1.327.1.1.1.2.1.43 | ColumnportReceiveCongestions | read-only | mandatory | Number of packets dropped due to lack of buffers during receive. |
| 1.3.6.1.4.1.327.1.1.1.2.1.44 | ColumnportUnknownProtocols | read-only | mandatory | Number of packets received with unknown DLC type. |
| 1.3.6.1.4.1.327.1.1.1.2.1.45 | ColumnportAccessType | read-write | mandatory | Access Type for the corresponding port: ui for normal login sequence, arap for AppleTalk, and ppp for ppp's authentication (PAP/CHAP) |
| 1.3.6.1.4.1.327.1.1.1.2.1.46 | ColumnportDialHangUp | read-write | mandatory | Hang up current connection |
| 1.3.6.1.4.1.327.1.1.1.2.1.47 | ColumnportPortDisabled | read-write | mandatory | The variable disables port for dialout function. |
| 1.3.6.1.4.1.327.1.1.1.2.1.48 | ColumnportArapCompress | read-write | mandatory | The variable for arap compression. |
| 1.3.6.1.4.1.327.1.1.1.2.1.49 | ColumnportInterFace | read-only | mandatory | The variable shows the port interface type. |
| 1.3.6.1.4.1.327.1.1.1.2.1.50 | ColumnportLEDLink | read-only | mandatory | The variable shows the port link LED. |
| 1.3.6.1.4.1.327.1.1.1.2.1.51 | ColumnportLEDActivity | read-only | mandatory | The variable shows the port activity LED. |
| 1.3.6.1.4.1.327.1.1.1.2.1.52 | ColumnportLEDFault | read-only | mandatory | The variable shows the port fault LED. |
| 1.3.6.1.4.1.327.1.1.1.2.1.53 | ColumnportLinkType | read-write | mandatory | The variable shows the ISDN port link type. |
| 1.3.6.1.4.1.327.1.1.1.2.1.54 | ColumnportSwitchType | read-write | mandatory | The variable shows the ISDN port country type. |
| 1.3.6.1.4.1.327.1.1.1.2.1.55 | ColumnportSPID-1 | read-write | mandatory | The variable shows the ISDN port SPID #1. |
| 1.3.6.1.4.1.327.1.1.1.2.1.56 | ColumnportSPID-2 | read-write | mandatory | The variable shows the ISDN port SPID #2. |
| 1.3.6.1.4.1.327.1.1.1.2.1.57 | ColumnportDirectoryNo-1 | read-write | mandatory | The variable shows the ISDN port DirectoryNo #1. |
| 1.3.6.1.4.1.327.1.1.1.2.1.58 | ColumnportDirectoryNo-2 | read-write | mandatory | The variable shows the ISDN port DirectoryNo #2. |
| 1.3.6.1.4.1.327.1.1.1.2.1.59 | ColumnportLocalDialNo-1 | read-write | mandatory | The variable shows the ISDN port LocalDialNo #1. |
| 1.3.6.1.4.1.327.1.1.1.2.1.60 | ColumnportLocalDialNo-2 | read-write | mandatory | The variable shows the ISDN port LocalDialNo #2. |
| 1.3.6.1.4.1.327.1.1.1.2.1.61 | ColumnportLocalSubaddress-1 | read-write | mandatory | The variable shows the ISDN port LocalSubaddress #1. |
| 1.3.6.1.4.1.327.1.1.1.2.1.62 | ColumnportLocalSubaddress-2 | read-write | mandatory | The variable shows the ISDN port LocalSubaddress #2. |
| 1.3.6.1.4.1.327.1.1.1.2.1.63 | ColumnportProtocolMode | read-write | mandatory | The variable shows the ISDN port protocol mode. |
| 1.3.6.1.4.1.327.1.1.1.2.1.64 | ColumnportPortReset | read-write | mandatory | The variable resets ISDN port. |
| 1.3.6.1.4.1.327.1.1.1.2.1.65 | ColumnportIncomingCalls | read-only | mandatory | Number of ISDN incoming calls. |
| 1.3.6.1.4.1.327.1.1.1.2.1.66 | ColumnportOutgoingCalls | read-only | mandatory | Number of ISDN outgoing calls. |
| 1.3.6.1.4.1.327.1.1.1.2.1.67 | ColumnportRemoteDialNo | read-only | mandatory | The variable shows the ISDN port B channel remote dial no. |
| 1.3.6.1.4.1.327.1.1.1.2.1.68 | ColumnportRemoteSubaddress | read-only | mandatory | The variable shows the ISDN port B channel remote subaddress. |
| 1.3.6.1.4.1.327.1.1.1.2.1.69 | ColumnportISDNInterfaceType | read-only | mandatory | The variable shows the interface type of the ISDN card. |
| 1.3.6.1.4.1.327.1.1.1.2.1.70 | ColumnportPathName | read-only | mandatory | The variable shows the path name on this port. |
| 1.3.6.1.4.1.327.1.1.1.2.1.71 | ColumnportILCCPState | read-only | mandatory | This parameter indicates the individual link CCP state. |
| 1.3.6.1.4.1.327.1.1.1.2.1.72 | ColumnportCurISDNBChannel | read-only | mandatory | This parameter indicates the physical binding channel number. |
| 1.3.6.1.4.1.327.1.1.1.2.1.73 | ColumnportLoginStatus | read-only | mandatory | This parameter indicates the login status for this port. |
| 1.3.6.1.4.1.327.1.1.1.2.1.74 | ColumnportLastConnectBChannel | read-only | mandatory | This parameter indicates last connect B channel for this ISDN line. |
| 1.3.6.1.4.1.327.1.1.1.2.1.75 | ColumnportISDNPhyLineStatus | read-only | mandatory | This parameter indicates physical line status for this ISDN line. |
| 1.3.6.1.4.1.327.1.1.1.2.1.76 | ColumnportTEIState | read-only | mandatory | This parameter indicates TEI state for this ISDN line. |
| 1.3.6.1.4.1.327.1.1.1.2.1.77 | ColumnportLayer3Status | read-only | mandatory | This parameter indicates lay 3 status for this ISDN line. |
| 1.3.6.1.4.1.327.1.1.1.3 | ScalarportResetAllCounters | read-write | mandatory | Writing any value to this variable will reset all port-related counters to zero. |
| 1.3.6.1.4.1.327.1.1.1.4 | TableportSourceRouteTable | not-accessible | mandatory | Source route information table for end stations. |
| 1.3.6.1.4.1.327.1.1.1.4.1 | RowportSourceRouteEntry | not-accessible | mandatory | A source route path to an end station. |
| 1.3.6.1.4.1.327.1.1.1.4.1.1 | ColumnportSRMacAddress | read-only | mandatory | MAC address of the Source Route table entry. |
| 1.3.6.1.4.1.327.1.1.1.4.1.2 | ColumnportSRState | read-only | mandatory | Source Route path state of the Source Route table entry. |
| 1.3.6.1.4.1.327.1.1.1.4.1.3 | ColumnportSRTimeToLive | read-only | mandatory | Time to live information of the Source Route table entry. |
| 1.3.6.1.4.1.327.1.1.1.4.1.4 | ColumnportSRLargestFrame | read-only | mandatory | Largest frame information of the Source Route table entry. |
| 1.3.6.1.4.1.327.1.1.1.4.1.5 | ColumnportSRDirection | read-only | mandatory | Path direction of the Source Route table entry. |
| 1.3.6.1.4.1.327.1.1.1.4.1.6 | ColumnportSRRouteDescrpt | read-only | mandatory | Path information of the Source Route table entry. |
| 1.3.6.1.4.1.327.1.1.1.5 | ScalarportAllLoginStatus | read-only | mandatory | This parameter indicates the login status for all ports. The format is the sequence of portID and login status. |
| 1.3.6.1.4.1.327.1.1.1.6 | ScalarportTokenRingSpeed | read-only | mandatory | Current Token Ring speed. |
| 1.3.6.1.4.1.327.1.1.1.7 | ScalarportAllLEDStatus | read-only | mandatory | This parameter indicates the led status for all ports. The format is the sequence of portID, Link LED, Activity LED and Fault LED. |
| 1.3.6.1.4.1.327.1.1.2 | Nodepath | |||
| 1.3.6.1.4.1.327.1.1.2.1 | ScalarprpaNumber | read-only | mandatory | The number of remote PC access paths on this system. |
| 1.3.6.1.4.1.327.1.1.2.2 | TableprpaTable | not-accessible | mandatory | Remote PC access path table. |
| 1.3.6.1.4.1.327.1.1.2.2.1 | RowprpaEntry | not-accessible | mandatory | A path to a remote PC. |
| 1.3.6.1.4.1.327.1.1.2.2.1.1 | ColumnprpaIndex | read-only | mandatory | A unique value for each remote PC access path. The value for each path must remain constant at least from one re-initialization of the entity's network managem… |
| 1.3.6.1.4.1.327.1.1.2.2.1.2 | ColumnprpaName | read-only | mandatory | A unique user-recognizable name for each remote PC access path. |
| 1.3.6.1.4.1.327.1.1.2.2.1.3 | ColumnprpaType | read-only | mandatory | The type of path. Invalid means this path no longer exists. |
| 1.3.6.1.4.1.327.1.1.2.2.1.4 | ColumnprpaPortIdx | read-only | mandatory | A number to uniquely identify a port for this remote PC access path. |
| 1.3.6.1.4.1.327.1.1.2.2.1.5 | ColumnprpaAutoHangUp | read-write | mandatory | This flag indicates whether Auto-hangup feature is enabled. If enabled, the line will be disconnected if no traffic activity has been detected for default time… |
| 1.3.6.1.4.1.327.1.1.2.2.1.6 | ColumnprpaInPackets | read-only | mandatory | Packets received with no error. |
| 1.3.6.1.4.1.327.1.1.2.2.1.7 | ColumnprpaOutPackets | read-only | mandatory | Packets transmitted with no error. |
| 1.3.6.1.4.1.327.1.1.2.2.1.8 | ColumnprpaInBytes | read-only | mandatory | Bytes received with no error. |
| 1.3.6.1.4.1.327.1.1.2.2.1.9 | ColumnprpaOutBytes | read-only | mandatory | Bytes transmitted with no error. |
| 1.3.6.1.4.1.327.1.1.2.2.1.10 | ColumnprpaResetPrpaCounters | read-write | mandatory | Writing any value to this variable will reset all prpa-related counters to zero. |
| 1.3.6.1.4.1.327.1.1.2.2.1.11 | ColumnprpaLoginStatus | read-only | mandatory | Login status of this RPA path. |
| 1.3.6.1.4.1.327.1.1.2.2.1.12 | ColumnprpaLoginUserName | read-only | mandatory | The name of the currently logged-in user. |
| 1.3.6.1.4.1.327.1.1.2.2.1.13 | ColumnprpaLoginTime | read-only | mandatory | The start time (in HH:MM:SS) of current session. |
| 1.3.6.1.4.1.327.1.1.2.2.1.14 | ColumnprpaLoginDuration | read-only | mandatory | The elapsed time (in HH:MM:SS) of current session. |
| 1.3.6.1.4.1.327.1.1.2.2.1.15 | ColumnprpaLoginAttempts | read-only | mandatory | Number of unsuccessful login attempts in this authentication process. |
| 1.3.6.1.4.1.327.1.1.2.2.1.16 | ColumnprpaLoginInPackets | read-only | mandatory | Number of correctly received packets in this session. |
| 1.3.6.1.4.1.327.1.1.2.2.1.17 | ColumnprpaLoginOutPackets | read-only | mandatory | Number of correctly transmitted packets in this session. |
| 1.3.6.1.4.1.327.1.1.2.2.1.18 | ColumnprpaLoginInBytes | read-only | mandatory | Number of correctly received bytes in this session. |
| 1.3.6.1.4.1.327.1.1.2.2.1.19 | ColumnprpaLoginOutBytes | read-only | mandatory | Number of correctly transmitted bytes in this session. |
| 1.3.6.1.4.1.327.1.1.2.2.1.20 | ColumnprpaLoginParityErrors | read-only | mandatory | Number of characters received with parity error in this session. |
| 1.3.6.1.4.1.327.1.1.2.2.1.21 | ColumnprpaLoginFrameErrors | read-only | mandatory | Number of characters received with framing error in this session. |
| 1.3.6.1.4.1.327.1.1.2.2.1.22 | ColumnprpaLoginOverrunErrors | read-only | mandatory | Number of receive overrun errors in this session. |
| 1.3.6.1.4.1.327.1.1.2.2.1.23 | ColumnprpaLoginCksumErrors | read-only | mandatory | Number of incoming pakets with bad checksum in this session. |
| 1.3.6.1.4.1.327.1.1.2.2.1.24 | ColumnprpaFilterAction | read-write | mandatory | The action to be taken by the configured this path's filters. |
| 1.3.6.1.4.1.327.1.1.2.2.1.25 | ColumnprpaFilterMap | read-write | mandatory | This is a 16 bit bitmap corresponds to the bridge filter table. |
| 1.3.6.1.4.1.327.1.1.2.2.1.26 | ColumnprpaLoggerMap | read-write | mandatory | This is a 16 bit bitmap corresponds to the bridge logger table. |
| 1.3.6.1.4.1.327.1.1.2.2.1.27 | ColumnprpaFilterCount | read-only | mandatory | The number of packets that have been filtered. |
| 1.3.6.1.4.1.327.1.1.2.2.1.28 | ColumnprpaLoggerCount | read-only | mandatory | The value gives the number of incoming packets that match this log description. |
| 1.3.6.1.4.1.327.1.1.2.2.1.29 | ColumnprpaDiscardedPackets | read-only | mandatory | Packets discarded. |
| 1.3.6.1.4.1.327.1.1.2.2.1.30 | ColumnprpaForwardedPackets | read-only | mandatory | Packets forwarded. |
| 1.3.6.1.4.1.327.1.1.2.2.1.31 | ColumnprpaReceivedPackets | read-only | mandatory | Packets received. |
| 1.3.6.1.4.1.327.1.1.2.2.1.32 | ColumnprpaSmartFiltering | read-write | mandatory | This enables/disables AccessBuilder's Smart Filtering feature. |
| 1.3.6.1.4.1.327.1.1.2.2.1.33 | ColumnprpaCurrentMacAddr | read-only | mandatory | This parameter displays the remote client's MAC address. |
| 1.3.6.1.4.1.327.1.1.2.2.1.34 | ColumnprpaIpEthernetII | read-only | mandatory | This parameter indicates the protocol IP EthernetII running in the remotepc client. |
| 1.3.6.1.4.1.327.1.1.2.2.1.35 | ColumnprpaIpSnap | read-only | mandatory | This parameter indicates the protocol IP Snap running in the remotepc client. |
| 1.3.6.1.4.1.327.1.1.2.2.1.36 | ColumnprpaRemotePcIpAddress | read-only | mandatory | This parameter indicates the IP address running in the remotepc client. |
| 1.3.6.1.4.1.327.1.1.2.2.1.37 | ColumnprpaIpxEn2WithNetBIOS | read-only | mandatory | This parameter indicates the protocol IPX EthernetII with NetBIOS running in the remotepc client. |
| 1.3.6.1.4.1.327.1.1.2.2.1.38 | ColumnprpaIpx8023WithNetBIOS | read-only | mandatory | This parameter indicates the protocol IPX 802.3 with NetBIOS running in the remotepc client. |
| 1.3.6.1.4.1.327.1.1.2.2.1.39 | ColumnprpaIpx8022WithNetBIOS | read-only | mandatory | This parameter indicates the protocol IPX 802.2 with NetBIOS running in the remotepc client. |
| 1.3.6.1.4.1.327.1.1.2.2.1.40 | ColumnprpaIpxSnapWithNetBIOS | read-only | mandatory | This parameter indicates the protocol IPX Snap with NetBIOS running in the remotepc client. |
| 1.3.6.1.4.1.327.1.1.2.2.1.41 | ColumnprpaXNS | read-only | mandatory | This parameter indicates the protocol XNS running in the remotepc client. |
| 1.3.6.1.4.1.327.1.1.2.2.1.42 | ColumnprpaVinesEthernetII | read-only | mandatory | This parameter indicates the protocol Vines EthernetII running in the remotepc client. |
| 1.3.6.1.4.1.327.1.1.2.2.1.43 | ColumnprpaVinesSnap | read-only | mandatory | This parameter indicates the protocol Vines Snap running in the remotepc client. |
| 1.3.6.1.4.1.327.1.1.2.2.1.44 | ColumnprpaNetBIOS | read-only | mandatory | This parameter indicates the protocol NetBIOS running in the remotepc client. |
| 1.3.6.1.4.1.327.1.1.2.2.1.45 | ColumnprpaDECNet | read-only | mandatory | This parameter indicates the protocol DECNET running in the remotepc client. |
| 1.3.6.1.4.1.327.1.1.2.2.1.46 | ColumnprpaUnknowEthernetII | read-only | mandatory | This parameter indicates the protocol Unknown EthernetII running in the remotepc client. |
| 1.3.6.1.4.1.327.1.1.2.2.1.47 | ColumnprpaUnknownSap | read-only | mandatory | This parameter indicates the protocol Unknown Sap running in the remotepc client. |
| 1.3.6.1.4.1.327.1.1.2.2.1.48 | ColumnprpaUnknownSnap | read-only | mandatory | This parameter indicates the protocol Unknown Snap running in the remotepc client. |
| 1.3.6.1.4.1.327.1.1.2.2.1.49 | ColumnprpaMulticastAddress | read-only | mandatory | This parameter indicates the multicast address packets recongnized by the remotepc client. |
| 1.3.6.1.4.1.327.1.1.2.2.1.50 | ColumnprpaXNSSap | read-only | mandatory | This parameter indicates the protocol XNS Sap running in the remotepc client. |
| 1.3.6.1.4.1.327.1.1.2.2.1.51 | ColumnprpaXNSSnap | read-only | mandatory | This parameter indicates the protocol XNS Snap running in the remotepc client. |
| 1.3.6.1.4.1.327.1.1.2.2.1.52 | ColumnprpaVinesSap | read-only | mandatory | This parameter indicates the protocol Vines Sap running in the remotepc client. |
| 1.3.6.1.4.1.327.1.1.2.2.1.53 | ColumnprpaIpxEn2 | read-only | mandatory | This parameter indicates the protocol IPX EthernetII running in the remotepc client. |
| 1.3.6.1.4.1.327.1.1.2.2.1.54 | ColumnprpaIpx8023 | read-only | mandatory | This parameter indicates the protocol IPX 802.3 running in the remotepc client. |
| 1.3.6.1.4.1.327.1.1.2.2.1.55 | ColumnprpaIpx8022 | read-only | mandatory | This parameter indicates the protocol IPX 802.2 running in the remotepc client. |
| 1.3.6.1.4.1.327.1.1.2.2.1.56 | ColumnprpaIpxSnap | read-only | mandatory | This parameter indicates the protocol IPX Snap running in the remotepc client. |
| 1.3.6.1.4.1.327.1.1.2.2.1.57 | ColumnprpaPortList | read-only | mandatory | This parameter indicates the port-id list for the binding ports on this RPA path. |
| 1.3.6.1.4.1.327.1.1.2.2.1.58 | ColumnprpaSpoofState | read-only | mandatory | This parameter indicates the spoofing state. |
| 1.3.6.1.4.1.327.1.1.2.2.1.59 | ColumnprpaCCPState | read-only | mandatory | This parameter indicates the CCP state. |
| 1.3.6.1.4.1.327.1.1.2.2.1.60 | ColumnprpaIPCPState | read-only | mandatory | This parameter indicates the IPCP state. |
| 1.3.6.1.4.1.327.1.1.2.2.1.61 | ColumnprpaIPXCPState | read-only | mandatory | This parameter indicates the IPXCP state. |
| 1.3.6.1.4.1.327.1.1.2.2.1.62 | ColumnprpaBNCPState | read-only | mandatory | This parameter indicates the BNCP state. |
| 1.3.6.1.4.1.327.1.1.2.2.1.63 | ColumnprpaARAPState | read-only | mandatory | This parameter indicates the ARAP state. |
| 1.3.6.1.4.1.327.1.1.2.2.1.64 | ColumnprpaLinkUtil | read-only | mandatory | This parameter indicates the link utilization. |
| 1.3.6.1.4.1.327.1.1.2.3 | ScalarplocalNumber | read-only | mandatory | The number of local route paths on this system. |
| 1.3.6.1.4.1.327.1.1.2.4 | TableplocalTable | not-accessible | mandatory | Local route path table. |
| 1.3.6.1.4.1.327.1.1.2.4.1 | RowplocalEntry | not-accessible | mandatory | A list of information for a local route path. |
| 1.3.6.1.4.1.327.1.1.2.4.1.1 | ColumnplocalIndex | read-only | mandatory | A unique value for each network route path. The value for each path must remain constant at least from one re-initialization of the entity's network management… |
| 1.3.6.1.4.1.327.1.1.2.4.1.2 | ColumnplocalName | read-only | mandatory | A unique user-recognizable name for each local route path. |
| 1.3.6.1.4.1.327.1.1.2.4.1.3 | ColumnplocalType | read-only | mandatory | The variable indicates whether this local route path entry is currently effective. |
| 1.3.6.1.4.1.327.1.1.2.4.1.4 | ColumnplocalPortIdx | read-only | mandatory | A number to uniquely identify a port for this local route path. The port that is identified by this index is the as the port identified by PortIndex in portTab… |
| 1.3.6.1.4.1.327.1.1.2.4.1.5 | ColumnplocalInPackets | read-only | mandatory | Packets received with no error. |
| 1.3.6.1.4.1.327.1.1.2.4.1.6 | ColumnplocalOutPackets | read-only | mandatory | Packets transmitted with no error. |
| 1.3.6.1.4.1.327.1.1.2.4.1.7 | ColumnplocalInBytes | read-only | mandatory | Bytes received with no error. |
| 1.3.6.1.4.1.327.1.1.2.4.1.8 | ColumnplocalOutBytes | read-only | mandatory | Bytes transmitted with no error. |
| 1.3.6.1.4.1.327.1.1.2.4.1.9 | ColumnplocalResetPlocalCounters | read-write | mandatory | Writing any value to this variable will reset all plocal-related counters to zero. |
| 1.3.6.1.4.1.327.1.1.2.4.1.10 | ColumnplocalFilterAction | read-write | mandatory | The action to be taken by the configured this path's filters. |
| 1.3.6.1.4.1.327.1.1.2.4.1.11 | ColumnplocalFilterMap | read-write | mandatory | This is a 16 bit bitmap corresponds to the bridge filetr table. |
| 1.3.6.1.4.1.327.1.1.2.4.1.12 | ColumnplocalLoggerMap | read-write | mandatory | This is a 16 bit bitmap corresponds to the bridge logger table. |
| 1.3.6.1.4.1.327.1.1.2.4.1.13 | ColumnplocalFilterCount | read-only | mandatory | The number of packets that have been filtered. |
| 1.3.6.1.4.1.327.1.1.2.4.1.14 | ColumnplocalLoggerCount | read-only | mandatory | The value gives the number of incoming packets that match this log description. |
| 1.3.6.1.4.1.327.1.1.2.4.1.15 | ColumnplocalDiscardedPackets | read-only | mandatory | Packets discarded. |
| 1.3.6.1.4.1.327.1.1.2.4.1.16 | ColumnplocalForwardedPackets | read-only | mandatory | Packets forwarded. |
| 1.3.6.1.4.1.327.1.1.2.4.1.17 | ColumnplocalReceivedPackets | read-only | mandatory | Packets received. |
| 1.3.6.1.4.1.327.1.1.2.5 | ScalarprmtNumber | read-only | mandatory | The number of route paths on this system. |
| 1.3.6.1.4.1.327.1.1.2.6 | TableprmtTable | not-accessible | mandatory | Route path table. |
| 1.3.6.1.4.1.327.1.1.2.6.1 | RowprmtEntry | not-accessible | mandatory | A list of information for a route path. |
| 1.3.6.1.4.1.327.1.1.2.6.1.1 | ColumnprmtIndex | read-only | mandatory | A unique value for each network route path. The value for each path must remain constant at least from one re-initialization of the entity's network management… |
| 1.3.6.1.4.1.327.1.1.2.6.1.2 | ColumnprmtName | read-write | mandatory | A unique user-recognizable name for each remote PC access path. |
| 1.3.6.1.4.1.327.1.1.2.6.1.3 | ColumnprmtType | read-write | mandatory | The variable indicates whether this remote route path entry is currently effective. |
| 1.3.6.1.4.1.327.1.1.2.6.1.4 | ColumnprmtInitiator | read-write | mandatory | Used on remote path only. This flag tells whether this side should initiate the connection. |
| 1.3.6.1.4.1.327.1.1.2.6.1.5 | ColumnprmtCongestThreshold | read-write | mandatory | Used on remote paths with on-demand ports only. It is used to determine when a on-demand port be started. |
| 1.3.6.1.4.1.327.1.1.2.6.1.6 | ColumnprmtScheduleType1 | read-write | mandatory | The variable is meaningful only on paths with schedule port. It described the port's schedule type - daily, weekly or monthly. |
| 1.3.6.1.4.1.327.1.1.2.6.1.7 | ColumnprmtDaysScheduled1 | read-write | mandatory | The variable is meaningful only on paths with schedule port. A bit map of days on which each '1' bit represents a day that the port will be scheduled. The leas… |
| 1.3.6.1.4.1.327.1.1.2.6.1.8 | ColumnprmtStartTime1 | read-write | mandatory | The variable is meaningful only on paths with schedule port. This describes the scheduled port connection period in StartHour:StartMinute format. |
| 1.3.6.1.4.1.327.1.1.2.6.1.9 | ColumnprmtHowLong1 | read-write | mandatory | The variable is meaningful only on paths with schedule port. This describes the scheduled port connection period in DurationHour:DurationMinute format. |
| 1.3.6.1.4.1.327.1.1.2.6.1.10 | ColumnprmtScheduleType2 | read-write | mandatory | The variable is meaningful only on paths with schedule port. It described the port's schedule type - daily, weekly or monthly. |
| 1.3.6.1.4.1.327.1.1.2.6.1.11 | ColumnprmtDaysScheduled2 | read-write | mandatory | The variable is meaningful only on paths with schedule port. A bit map of days on which each '1' bit represents a day that the port will be scheduled. The leas… |
| 1.3.6.1.4.1.327.1.1.2.6.1.12 | ColumnprmtStartTime2 | read-write | mandatory | The variable is meaningful only on paths with schedule port. This describes the scheduled port connection period in StartHour:StartMinute format. |
| 1.3.6.1.4.1.327.1.1.2.6.1.13 | ColumnprmtHowLong2 | read-write | mandatory | The variable is meaningful only on paths with schedule port. This describes the scheduled port connection period in DurationHour:DurationMinute format. |
| 1.3.6.1.4.1.327.1.1.2.6.1.14 | ColumnprmtInPackets | read-only | mandatory | Packets received with no error. |
| 1.3.6.1.4.1.327.1.1.2.6.1.15 | ColumnprmtOutPackets | read-only | mandatory | Packets transmitted with no error. |
| 1.3.6.1.4.1.327.1.1.2.6.1.16 | ColumnprmtInBytes | read-only | mandatory | Bytes received with no error. |
| 1.3.6.1.4.1.327.1.1.2.6.1.17 | ColumnprmtOutBytes | read-only | mandatory | Bytes transmitted with no error. |
| 1.3.6.1.4.1.327.1.1.2.6.1.18 | ColumnprmtResetPrmtCounters | read-write | mandatory | Writing any value to this variable will reset all prmt-related counters to zero. |
| 1.3.6.1.4.1.327.1.1.2.6.1.19 | ColumnprmtFilterAction | read-write | mandatory | The action to be taken by the configured this path's filters. |
| 1.3.6.1.4.1.327.1.1.2.6.1.20 | ColumnprmtFilterMap | read-write | mandatory | This is a 16 bit bitmap corresponds to the bridge filetr table. |
| 1.3.6.1.4.1.327.1.1.2.6.1.21 | ColumnprmtLoggerMap | read-write | mandatory | This is a 16 bit bitmap corresponds to the bridge logger table. |
| 1.3.6.1.4.1.327.1.1.2.6.1.22 | ColumnprmtFilterCount | read-only | mandatory | The number of packets that have been filtered. |
| 1.3.6.1.4.1.327.1.1.2.6.1.23 | ColumnprmtLoggerCount | read-only | mandatory | The value gives the number of incoming packets that match this log description. |
| 1.3.6.1.4.1.327.1.1.2.6.1.24 | ColumnprmtDiscardedPackets | read-only | mandatory | Packets discarded. |
| 1.3.6.1.4.1.327.1.1.2.6.1.25 | ColumnprmtForwardedPackets | read-only | mandatory | Packets forwarded. |
| 1.3.6.1.4.1.327.1.1.2.6.1.26 | ColumnprmtReceivedPackets | read-only | mandatory | Packets received. |
| 1.3.6.1.4.1.327.1.1.2.6.1.27 | ColumnprmtSmartFiltering | read-write | mandatory | This enables/disables AccessBuilder's Smart Filtering feature. |
| 1.3.6.1.4.1.327.1.1.2.6.1.28 | ColumnprmtOutCongestions | read-only | mandatory | Number of packet transmit congestions. |
| 1.3.6.1.4.1.327.1.1.2.6.1.29 | ColumnprmtRmtRouterName | read-write | mandatory | Remote router name. |
| 1.3.6.1.4.1.327.1.1.2.6.1.30 | ColumnprmtTypeSelection | read-write | mandatory | Path type selection. |
| 1.3.6.1.4.1.327.1.1.2.6.1.31 | ColumnprmtAsyncPortNo | read-write | mandatory | Number of async ports for Backup, On-demand and Schedule type. |
| 1.3.6.1.4.1.327.1.1.2.6.1.32 | ColumnprmtISDNPortNo | read-write | mandatory | Number of ISDN ports for Backup, On-demand and Schedule type. |
| 1.3.6.1.4.1.327.1.1.2.6.1.33 | ColumnprmtISDNReqBaudRate | read-write | mandatory | ISDN required baudrate for satisfying all cases. |
| 1.3.6.1.4.1.327.1.1.2.6.1.34 | ColumnprmtSpoofState | read-only | mandatory | This parameter indicates the spoofing state. |
| 1.3.6.1.4.1.327.1.1.2.6.1.35 | ColumnprmtCCPState | read-only | mandatory | This parameter indicates the CCP state. |
| 1.3.6.1.4.1.327.1.1.2.6.1.36 | ColumnprmtIPCPState | read-only | mandatory | This parameter indicates the IPCP state. |
| 1.3.6.1.4.1.327.1.1.2.6.1.37 | ColumnprmtIPXCPState | read-only | mandatory | This parameter indicates the IPXCP state. |
| 1.3.6.1.4.1.327.1.1.2.6.1.38 | ColumnprmtBNCPState | read-only | mandatory | This parameter indicates the BNCP state. |
| 1.3.6.1.4.1.327.1.1.2.6.1.39 | ColumnprmtLinkUtil | read-only | mandatory | This parameter indicates the link utilization. |
| 1.3.6.1.4.1.327.1.1.2.6.1.40 | ColumnprmtPMPortList | read-only | mandatory | This parameter indicates the port-id list for the binding permenant ports on this Remote path. |
| 1.3.6.1.4.1.327.1.1.2.6.1.41 | ColumnprmtBUPortList | read-only | mandatory | This parameter indicates the port-id list for the binding backup ports on this Remote path. |
| 1.3.6.1.4.1.327.1.1.2.6.1.42 | ColumnprmtODPortList | read-only | mandatory | This parameter indicates the port-id list for the binding on-demand ports on this Remote path. |
| 1.3.6.1.4.1.327.1.1.2.6.1.43 | ColumnprmtSCPortList | read-only | mandatory | This parameter indicates the port-id list for the binding schedule ports on this Remote path. |
| 1.3.6.1.4.1.327.1.1.2.7 | TableprmtPortTable | not-accessible | mandatory | Route path port table. |
| 1.3.6.1.4.1.327.1.1.2.7.1 | RowprmtPortEntry | not-accessible | mandatory | A list of information for each port associated with a route path. |
| 1.3.6.1.4.1.327.1.1.2.7.1.1 | ColumnprmtPortPrmtIdx | read-only | mandatory | The route path on which this entry's equivalence is effective. The path identified by a particular value of this index is the same route path as identified by … |
| 1.3.6.1.4.1.327.1.1.2.7.1.2 | ColumnprmtPortPortIdx | read-only | mandatory | The port on which the entry's equivalence is effective. The path identified by a particular value of this index is the same route path as identified by the sam… |
| 1.3.6.1.4.1.327.1.1.2.7.1.3 | ColumnprmtPortType | read-write | mandatory | Used on remote path only. This vaiable tells the type of port. |
| 1.3.6.1.4.1.327.1.1.2.7.1.4 | ColumnprmtPortPhoneNumber | read-write | mandatory | Used on remote path only. The phone number to be used by this type of port in the path. |
| 1.3.6.1.4.1.327.1.1.2.7.1.5 | ColumnprmtPortDirectoryNo | read-write | mandatory | Used on remote path only. The directory number to be used by this type of port in the path. |
| 1.3.6.1.4.1.327.1.1.2.8 | ScalarpathResetAllCounters | read-write | mandatory | Writing any value to this variable will reset all path-related counters to zero. |
| 1.3.6.1.4.1.327.1.1.2.9 | TableprmtPhoneTable | not-accessible | mandatory | Router path phone table for Backup, On-demand and Schedule type. |
| 1.3.6.1.4.1.327.1.1.2.9.1 | RowprmtPhoneEntry | not-accessible | mandatory | A list of phone data for each port associated with a route path. |
| 1.3.6.1.4.1.327.1.1.2.9.1.1 | ColumnprmtPhonePrmtIdx | read-only | mandatory | Path index for phone table. |
| 1.3.6.1.4.1.327.1.1.2.9.1.2 | ColumnprmtPhoneIdx | read-only | mandatory | Phone table index. |
| 1.3.6.1.4.1.327.1.1.2.9.1.3 | ColumnprmtPhoneType | read-write | mandatory | Phone type for remote path. |
| 1.3.6.1.4.1.327.1.1.2.9.1.4 | ColumnprmtPhonePhoneNumber | read-write | mandatory | Phone number in the phone table. |
| 1.3.6.1.4.1.327.1.1.2.9.1.5 | ColumnprmtPhoneDirectoryNo | read-write | mandatory | Directory number in the phone table. |
| 1.3.6.1.4.1.327.1.1.3 | Nodecrip | |||
| 1.3.6.1.4.1.327.1.1.3.1 | NodeipRpa | |||
| 1.3.6.1.4.1.327.1.1.3.1.1 | ScalaripRpaNumber | read-only | mandatory | The number of IP remote PC paths on this system. |
| 1.3.6.1.4.1.327.1.1.3.1.2 | TableipRpaTable | not-accessible | mandatory | Remote PC access path table. |
| 1.3.6.1.4.1.327.1.1.3.1.2.1 | RowipRpaEntry | not-accessible | mandatory | A path to a remote PC. |
| 1.3.6.1.4.1.327.1.1.3.1.2.1.1 | ColumnipRpaIndex | read-only | mandatory | The RPA path on which the entry's equivalence is effective. The path identified by a particular value of this index is the same RPA path as identified by the s… |
| 1.3.6.1.4.1.327.1.1.3.1.2.1.2 | ColumnipRpaCurrentClientIpAddress | read-only | mandatory | The current or last logged-in SLIP remote PC's IP address. |
| 1.3.6.1.4.1.327.1.1.3.1.2.1.3 | ColumnipRpaConfigClientIpAddress | read-write | mandatory | The administrator-assigned PPP remote PC's IP address. This is the IP address to be used by any PPP remote PC dial in to this port. |
| 1.3.6.1.4.1.327.1.1.3.1.2.1.4 | ColumnipRpaTcpHdrCompress | read-write | mandatory | The VJ Compression (RFC 1144 TCP/IP Header Compression) of the PPP |
| 1.3.6.1.4.1.327.1.1.3.1.2.1.5 | ColumnipRpaType | read-only | mandatory | The type of iprpath. Invalid means this path no longer exists. |
| 1.3.6.1.4.1.327.1.1.3.1.3 | ScalaripRpaBootpEnabled | read-write | mandatory | The variable enables BootP server on the AccessBuilder. |
| 1.3.6.1.4.1.327.1.1.3.1.4 | ScalaripRpaRarpEnabled | read-write | mandatory | The variable enables Reverse ARP server on the AccessBuilder. |
| 1.3.6.1.4.1.327.1.1.3.1.5 | ScalaripRpaBootpOrRarpRequired | read-write | mandatory | The variable forces remote clients to run BootP or Reverse ARP protocol before accessing IP hosts on the network. |
| 1.3.6.1.4.1.327.1.1.3.1.6 | ScalaripRpaBootpInPackets | read-only | mandatory | BootP packets received with no error. |
| 1.3.6.1.4.1.327.1.1.3.1.7 | ScalaripRpaBootpOutPackets | read-only | mandatory | BootP packets sent with no error. |
| 1.3.6.1.4.1.327.1.1.3.1.8 | ScalaripRpaRarpInPackets | read-only | mandatory | Reverse ARP packets received with no error. |
| 1.3.6.1.4.1.327.1.1.3.1.9 | ScalaripRpaRarpOutPackets | read-only | mandatory | Reverse ARP packets sent with no error. |
| 1.3.6.1.4.1.327.1.1.3.1.10 | ScalaripRpaResetAllRasCounters | read-write | mandatory | Writing any value to this variable will reset all Bootp and Reverse ARP counters to zero. |
| 1.3.6.1.4.1.327.1.1.3.1.11 | ScalaripRpaPRPAIpHdrCompress | read-write | mandatory | Turn on/off IP header compression for remote access path. |
| 1.3.6.1.4.1.327.1.1.3.2 | NodeipRt | |||
| 1.3.6.1.4.1.327.1.1.3.2.1 | ScalaripSRouteNumber | read-only | mandatory | The number of IP static routes on this system. |
| 1.3.6.1.4.1.327.1.1.3.2.2 | TableipSRouteTable | not-accessible | mandatory | IP static route table. |
| 1.3.6.1.4.1.327.1.1.3.2.2.1 | RowipSRouteEntry | not-accessible | mandatory | A list of information for each static route. |
| 1.3.6.1.4.1.327.1.1.3.2.2.1.1 | ColumnipSRouteIndex | read-only | mandatory | A statics route number of the static route for which the entry contains the route's information. |
| 1.3.6.1.4.1.327.1.1.3.2.2.1.2 | ColumnipSRouteName | read-write | mandatory | An user-defined name for the static route. |
| 1.3.6.1.4.1.327.1.1.3.2.2.1.3 | ColumnipSRouteType | read-write | mandatory | The variable indicates whether this static route entry is currently effective. |
| 1.3.6.1.4.1.327.1.1.3.2.2.1.4 | ColumnipSRoutePathType | read-write | mandatory | The variable indicates which route path table (local or remote) this route uses. |
| 1.3.6.1.4.1.327.1.1.3.2.2.1.5 | ColumnipSRoutePathIdx | read-write | mandatory | The route path on which the entry's equivalence is effective. The path identified by a particular value of this index is the same route path as identified by t… |
| 1.3.6.1.4.1.327.1.1.3.2.2.1.6 | ColumnipSRouteDestIpAddress | read-write | mandatory | The destination network's IP address. |
| 1.3.6.1.4.1.327.1.1.3.2.2.1.7 | ColumnipSRouteNextRouter | read-write | mandatory | The next router's IP address in this route. |
| 1.3.6.1.4.1.327.1.1.3.2.2.1.8 | ColumnipSRouteHopCount | read-write | mandatory | Number of hop needed to get to the destination network. |
| 1.3.6.1.4.1.327.1.1.3.2.3 | ScalaripPLocalNumber | read-only | mandatory | The number of IP dynamic routes on this system. |
| 1.3.6.1.4.1.327.1.1.3.2.4 | TableipPLocalTable | not-accessible | mandatory | IP dynamic route table. |
| 1.3.6.1.4.1.327.1.1.3.2.4.1 | RowipPLocalEntry | not-accessible | mandatory | A list of information for a IP dynamic route. |
| 1.3.6.1.4.1.327.1.1.3.2.4.1.1 | ColumnipPLocalIndex | read-only | mandatory | The route path on which the entry's equivalence is effective. The path identified by a particular value of this index is the same route path as identified by t… |
| 1.3.6.1.4.1.327.1.1.3.2.4.1.2 | ColumnipPLocalIpAddress | read-write | mandatory | This path's IP address. |
| 1.3.6.1.4.1.327.1.1.3.2.4.1.3 | ColumnipPLocalNetMask | read-write | mandatory | The netmask of the network that is attached to the path. |
| 1.3.6.1.4.1.327.1.1.3.2.4.1.4 | ColumnipPLocalBcastAddr | read-write | mandatory | The least significant bit of the IP broadcast address to network that is attached to the path. |
| 1.3.6.1.4.1.327.1.1.3.2.5 | ScalaripPRmtNumber | read-only | mandatory | The number of IP dynamic routes on this system. |
| 1.3.6.1.4.1.327.1.1.3.2.6 | TableipPRmtTable | not-accessible | mandatory | IP dynamic route table. |
| 1.3.6.1.4.1.327.1.1.3.2.6.1 | RowipPRmtEntry | not-accessible | mandatory | A list of information for a IP dynamic route. |
| 1.3.6.1.4.1.327.1.1.3.2.6.1.1 | ColumnipPRmtIndex | read-only | mandatory | The route path on which the entry's equivalence is effective. The path identified by a particular value of this index is the same route path as identified by t… |
| 1.3.6.1.4.1.327.1.1.3.2.6.1.2 | ColumnipPRmtIpAddress | read-write | mandatory | This path's IP address. |
| 1.3.6.1.4.1.327.1.1.3.2.6.1.3 | ColumnipPRmtNetMask | read-write | mandatory | The netmask of the network that is attached to the path. |
| 1.3.6.1.4.1.327.1.1.3.2.6.1.4 | ColumnipPRmtBcastAddr | read-write | mandatory | The least significant bit of the IP broadcast address to network that is attached to the path. |
| 1.3.6.1.4.1.327.1.1.3.2.6.1.5 | ColumnipPRmtRipUpdate | read-write | mandatory | The method of sending IP RIP packets and updating routing database for this path. |
| 1.3.6.1.4.1.327.1.1.3.2.6.1.6 | ColumnipPRmtType | read-only | mandatory | Indication of validity of this entry. |
| 1.3.6.1.4.1.327.1.1.3.2.6.1.7 | ColumnipPRmtTcpHdrCompress | read-write | mandatory | The VJ Compression (TCP/IP Header Compression) of the PPP |
| 1.3.6.1.4.1.327.1.1.3.2.7 | ScalaripRtUpdateTime | read-write | mandatory | The time interval (in seconds) at which the routing information is being updated. |
| 1.3.6.1.4.1.327.1.1.3.2.8 | ScalaripRtRipEnabled | read-write | mandatory | RIP protocol enable/disable flag. |
| 1.3.6.1.4.1.327.1.1.3.2.9 | ScalaripRtEnabled | read-write | mandatory | Router function enable/disable flag. |
| 1.3.6.1.4.1.327.1.1.3.2.10 | ScalaripRtDefaultTTL | read-write | mandatory | The default time-to-live value for IP messages. |
| 1.3.6.1.4.1.327.1.1.3.2.11 | ScalaripRtPoisonReverse | read-write | mandatory | This flag tells whether to enable Poison-Reverse feature in RIP protocol. |
| 1.3.6.1.4.1.327.1.1.3.2.12 | ScalaripRtResetAllCounters | read-write | mandatory | Writing any value to this variable will reset all port-related counters to zero. |
| 1.3.6.1.4.1.327.1.1.3.2.13 | ScalaripRtInPackets | read-only | mandatory | IP packets received with no error. |
| 1.3.6.1.4.1.327.1.1.3.2.14 | ScalaripRtOutPackets | read-only | mandatory | IP packets transmitted with no error. |
| 1.3.6.1.4.1.327.1.1.3.2.15 | ScalaripRtDefaultRouterAddress | read-write | mandatory | The default router's IP address. |
| 1.3.6.1.4.1.327.1.1.3.2.16 | ScalaripRtDefaultRouterPathType | read-write | mandatory | The variable indicates which route path table (local or remote) this route uses. |
| 1.3.6.1.4.1.327.1.1.3.2.17 | ScalaripRtDefaultRouterPathIdx | read-write | mandatory | The variable indicates the index to the path table (local or remote) this route uses. |
| 1.3.6.1.4.1.327.1.1.3.2.18 | ScalaripRtDiscardNBBcastPkts | read-write | mandatory | The variable indicates to discard or forward the NETBIOS broadcast packets to remote dial-in ports. |
| 1.3.6.1.4.1.327.1.1.4 | Nodeipx | |||
| 1.3.6.1.4.1.327.1.1.4.1 | NodeipxRpa | |||
| 1.3.6.1.4.1.327.1.1.4.1.1 | ScalaripxRpaNetNumber | read-write | mandatory | The IPX network address for all RPA paths. |
| 1.3.6.1.4.1.327.1.1.4.1.2 | ScalaripxRpaNumber | read-only | mandatory | The number of IPX remote PC paths on this system. |
| 1.3.6.1.4.1.327.1.1.4.1.3 | TableipxRpaTable | not-accessible | mandatory | IPX Remote PC access path table. |
| 1.3.6.1.4.1.327.1.1.4.1.3.1 | RowipxRpaEntry | not-accessible | mandatory | A path to a IPX remote PC. |
| 1.3.6.1.4.1.327.1.1.4.1.3.1.1 | ColumnipxRpaIndex | read-only | mandatory | The RPA path on which the entry's equivalence is effective. The path identified by a particular value of this index is the same RPA path as identified by the s… |
| 1.3.6.1.4.1.327.1.1.4.1.3.1.2 | ColumnipxRpaCurrHostAddr | read-only | mandatory | Current IPX Host Address |
| 1.3.6.1.4.1.327.1.1.4.2 | NodeipxRt | |||
| 1.3.6.1.4.1.327.1.1.4.2.1 | ScalaripxSRouteNumber | read-only | mandatory | The number of IPX static routes on this system. |
| 1.3.6.1.4.1.327.1.1.4.2.2 | TableipxSRouteTable | not-accessible | mandatory | IPX static route table. |
| 1.3.6.1.4.1.327.1.1.4.2.2.1 | RowipxSRouteEntry | not-accessible | mandatory | A list of information for a IPX static route. |
| 1.3.6.1.4.1.327.1.1.4.2.2.1.1 | ColumnipxSRouteIndex | read-only | mandatory | A statics route number of the IPX static route for which the entry contains the route's information. |
| 1.3.6.1.4.1.327.1.1.4.2.2.1.2 | ColumnipxSRouteName | read-write | mandatory | An user-defined name for the static route. |
| 1.3.6.1.4.1.327.1.1.4.2.2.1.3 | ColumnipxSRouteType | read-write | mandatory | The variable indicates whether this static route entry is currently effective. |
| 1.3.6.1.4.1.327.1.1.4.2.2.1.4 | ColumnipxSRoutePathType | read-write | mandatory | The variable indicates which route path table (local or remote) this route uses. |
| 1.3.6.1.4.1.327.1.1.4.2.2.1.5 | ColumnipxSRoutePathIdx | read-write | mandatory | The route path on which the entry's equivalence is effective. The path identified by a particular value of this index is the same route path as identified by t… |
| 1.3.6.1.4.1.327.1.1.4.2.2.1.6 | ColumnipxSRouteDestNetNumber | read-write | mandatory | The destination network's IPX network address. |
| 1.3.6.1.4.1.327.1.1.4.2.2.1.8 | ColumnipxSRouteNextHostAddress | read-write | mandatory | The host address of next IPX router in this route. |
| 1.3.6.1.4.1.327.1.1.4.2.2.1.9 | ColumnipxSRouteHopCount | read-write | mandatory | Number of hop needed to get to the destination network. |
| 1.3.6.1.4.1.327.1.1.4.2.3 | ScalaripxPLocalNumber | read-only | mandatory | The number of IPX dynamic routes on this system. |
| 1.3.6.1.4.1.327.1.1.4.2.4 | TableipxPLocalTable | not-accessible | mandatory | IPX dynamic routes table. |
| 1.3.6.1.4.1.327.1.1.4.2.4.1 | RowipxPLocalEntry | not-accessible | mandatory | A list of information for an IPX dynamic route. |
| 1.3.6.1.4.1.327.1.1.4.2.4.1.1 | ColumnipxPLocalIndex | read-only | mandatory | The route path on which the entry's equivalence is effective. The path identified by a particular value of this index is the same route path as identified by t… |
| 1.3.6.1.4.1.327.1.1.4.2.4.1.2 | ColumnipxPLocalNetNumber | read-write | mandatory | The network address of the network that is attached to the path. |
| 1.3.6.1.4.1.327.1.1.4.2.4.1.3 | ColumnipxPLocalDataLinkType | read-write | mandatory | For local path only. The type data link header used in this path. |
| 1.3.6.1.4.1.327.1.1.4.2.5 | ScalaripxPRmtNumber | read-only | mandatory | The number of IPX dynamic routes on this system. |
| 1.3.6.1.4.1.327.1.1.4.2.6 | TableipxPRmtTable | not-accessible | mandatory | IPX dynamic routes table. |
| 1.3.6.1.4.1.327.1.1.4.2.6.1 | RowipxPRmtEntry | not-accessible | mandatory | A list of information for an IPX dynamic route. |
| 1.3.6.1.4.1.327.1.1.4.2.6.1.1 | ColumnipxPRmtIndex | read-only | mandatory | The route path on which the entry's equivalence is effective. The path identified by a particular value of this index is the same route path as identified by t… |
| 1.3.6.1.4.1.327.1.1.4.2.6.1.2 | ColumnipxPRmtNetNumber | read-write | mandatory | The network address of the network that is attached to the path. |
| 1.3.6.1.4.1.327.1.1.4.2.6.1.3 | ColumnipxPRmtNripUpdate | read-write | mandatory | The method of sending NetWare RIP packets and updating routing database for this path. |
| 1.3.6.1.4.1.327.1.1.4.2.6.1.4 | ColumnipxPRmtType | read-only | mandatory | Indication of validity of this entry. |
| 1.3.6.1.4.1.327.1.1.4.2.7 | ScalaripxRtUpdateTime | read-write | mandatory | The time interval (in seconds) at which the routing information is being updated. |
| 1.3.6.1.4.1.327.1.1.4.2.8 | ScalaripxRtEnabled | read-write | mandatory | IPX router function enable/disable flag. |
| 1.3.6.1.4.1.327.1.1.4.2.9 | ScalaripxRtRipEnabled | read-write | mandatory | IPX RIP protocol enable/disable flag. |
| 1.3.6.1.4.1.327.1.1.4.2.11 | ScalaripxRtResetAllCounters | read-write | mandatory | Writing any value to this variable will reset all port-related counters to zero. |
| 1.3.6.1.4.1.327.1.1.4.2.12 | ScalaripxRtInPackets | read-only | mandatory | IPX packets received with no error. |
| 1.3.6.1.4.1.327.1.1.4.2.13 | ScalaripxRtOutPackets | read-only | mandatory | IPX packets transmitted with no error. |
| 1.3.6.1.4.1.327.1.1.4.2.14 | ScalaripxRtRipNumber | read-only | mandatory | The number of RIP entries on this system. |
| 1.3.6.1.4.1.327.1.1.4.2.15 | TableipxRtRipTable | not-accessible | mandatory | This table contains IPX RIP information. Each entry corresponds to a route description. |
| 1.3.6.1.4.1.327.1.1.4.2.15.1 | RowipxRtRipEntry | not-accessible | mandatory | A list of information for an IPX RIP entry. |
| 1.3.6.1.4.1.327.1.1.4.2.15.1.1 | ColumnipxRtRipDestNetNumber | read-only | mandatory | The destination network's IPX network address. |
| 1.3.6.1.4.1.327.1.1.4.2.15.1.2 | ColumnipxRtRipPathType | read-only | mandatory | The variable indicates which route path table (local or remote) this route uses. |
| 1.3.6.1.4.1.327.1.1.4.2.15.1.3 | ColumnipxRtRipPathIdx | read-only | mandatory | The route path on which the entry's equivalence is effective. The path identified by a particular value of this index is the same route path as identified by t… |
| 1.3.6.1.4.1.327.1.1.4.2.15.1.4 | ColumnipxRtRipNextHostAddress | read-only | mandatory | The host address of next IPX router in this route. |
| 1.3.6.1.4.1.327.1.1.4.2.15.1.5 | ColumnipxRtRipHopCount | read-only | mandatory | Number of hop needed to get to the destination network. |
| 1.3.6.1.4.1.327.1.1.4.2.15.1.6 | ColumnipxRtRipTicks | read-only | mandatory | Number of ticks needed to get to the destination network. |
| 1.3.6.1.4.1.327.1.1.4.2.15.1.7 | ColumnipxRtRipRouteType | read-only | mandatory | Indication of how the route is entered. |
| 1.3.6.1.4.1.327.1.1.4.2.16 | ScalaripxRtSapNumber | read-only | mandatory | The number of SAP entries on this system. |
| 1.3.6.1.4.1.327.1.1.4.2.17 | TableipxRtSapTable | not-accessible | mandatory | This table contains IPX SAP information. Each entry corresponds to a route description. |
| 1.3.6.1.4.1.327.1.1.4.2.17.1 | RowipxRtSapEntry | not-accessible | mandatory | A list of information for an IPX SAP entry. |
| 1.3.6.1.4.1.327.1.1.4.2.17.1.1 | ColumnipxRtSapIndex | read-only | mandatory | A sequentially assigned index value for each entry. |
| 1.3.6.1.4.1.327.1.1.4.2.17.1.2 | ColumnipxRtSapServiceName | read-only | mandatory | The name of the service. |
| 1.3.6.1.4.1.327.1.1.4.2.17.1.3 | ColumnipxRtSapServiceType | read-only | mandatory | The variable indicates which type of service this is. |
| 1.3.6.1.4.1.327.1.1.4.2.17.1.4 | ColumnipxRtSapServerNetNumber | read-only | mandatory | The network address of next IPX router in this route. |
| 1.3.6.1.4.1.327.1.1.4.2.17.1.5 | ColumnipxRtSapServerHostAddress | read-only | mandatory | The host address of next IPX router in this route. |
| 1.3.6.1.4.1.327.1.1.4.2.18 | ScalaripxSpoofingTime | read-write | mandatory | The time which centrum remote server acts as proxy |
| 1.3.6.1.4.1.327.1.1.4.2.19 | ScalaripxRtDoNBPropagation | read-write | mandatory | The variable indicates to flood the NETBIOS IPX propagation packets (type 20) to LAN and remote router. |
| 1.3.6.1.4.1.327.1.1.5 | Nodebrg | |||
| 1.3.6.1.4.1.327.1.1.5.1 | ScalarbrgFilterNumber | read-only | mandatory | The number of bridge filters on this system. |
| 1.3.6.1.4.1.327.1.1.5.2 | TablebrgFilterTable | not-accessible | mandatory | This table contains bridge filter information. Each entry corresponds to a filter description. Each filter description can consist of up to four conditions. Wh… |
| 1.3.6.1.4.1.327.1.1.5.2.1 | RowbrgFilterEntry | not-accessible | mandatory | A list of information for a bridge filter. |
| 1.3.6.1.4.1.327.1.1.5.2.1.1 | ColumnbrgFilterIndex | read-only | mandatory | A sequentally assigned index value for each entry. |
| 1.3.6.1.4.1.327.1.1.5.2.1.2 | ColumnbrgFilterName | read-write | mandatory | A unique user-recognizable name for each remote bridge filter defined. |
| 1.3.6.1.4.1.327.1.1.5.2.1.3 | ColumnbrgFilterType | read-write | mandatory | The indicates whether this filter is defined or not. |
| 1.3.6.1.4.1.327.1.1.5.2.1.4 | ColumnbrgFilterMask1Offset | read-write | mandatory | The byte offset of the first mask of this filter. |
| 1.3.6.1.4.1.327.1.1.5.2.1.5 | ColumnbrgFilterMask1Value | read-write | mandatory | The value of the first mask of this filter. This can be a byte, word or long value. |
| 1.3.6.1.4.1.327.1.1.5.2.1.6 | ColumnbrgFilterMask1Type | read-write | mandatory | The type of the 1st mask of this filter. |
| 1.3.6.1.4.1.327.1.1.5.2.1.7 | ColumnbrgFilterMask1Size | read-write | mandatory | The size (number of bytes covered by this mask) of the 1st mask of this filter. |
| 1.3.6.1.4.1.327.1.1.5.2.1.8 | ColumnbrgFilterMask2Offset | read-write | mandatory | The byte offset of the 2nd mask of this filter. |
| 1.3.6.1.4.1.327.1.1.5.2.1.9 | ColumnbrgFilterMask2Value | read-write | mandatory | The value of the 2nd mask of this filter. This can be a byte, word or long value. |
| 1.3.6.1.4.1.327.1.1.5.2.1.10 | ColumnbrgFilterMask2Type | read-write | mandatory | The type of the 2nd mask of this filter. |
| 1.3.6.1.4.1.327.1.1.5.2.1.11 | ColumnbrgFilterMask2Size | read-write | mandatory | The size (number of bytes covered by this mask) of the 2nd mask of this filter. |
| 1.3.6.1.4.1.327.1.1.5.2.1.12 | ColumnbrgFilterMask3Offset | read-write | mandatory | The byte offset of the 3rd mask of this filter. |
| 1.3.6.1.4.1.327.1.1.5.2.1.13 | ColumnbrgFilterMask3Value | read-write | mandatory | The value of the 3rd mask of this filter. This can be a byte, word or long value. |
| 1.3.6.1.4.1.327.1.1.5.2.1.14 | ColumnbrgFilterMask3Type | read-write | mandatory | The type of the 3rd mask of this filter. |
| 1.3.6.1.4.1.327.1.1.5.2.1.15 | ColumnbrgFilterMask3Size | read-write | mandatory | The size (number of bytes covered by this mask) of the 3rd mask of this filter. |
| 1.3.6.1.4.1.327.1.1.5.2.1.16 | ColumnbrgFilterMask4Offset | read-write | mandatory | The byte offset of the 4th mask of this filter. |
| 1.3.6.1.4.1.327.1.1.5.2.1.17 | ColumnbrgFilterMask4Value | read-write | mandatory | The value of the 4th mask of this filter. This can be a byte, word or long value. |
| 1.3.6.1.4.1.327.1.1.5.2.1.18 | ColumnbrgFilterMask4Type | read-write | mandatory | The type of the 4th mask of this filter. |
| 1.3.6.1.4.1.327.1.1.5.2.1.19 | ColumnbrgFilterMask4Size | read-write | mandatory | The size (number of bytes covered by this mask) of the 4th mask of this filter. |
| 1.3.6.1.4.1.327.1.1.5.2.1.20 | ColumnbrgFilterSkipRii | read-write | mandatory | Specifying if source route field should be skipped for fitler offset. |
| 1.3.6.1.4.1.327.1.1.5.3 | ScalarbrgLoggerNumber | read-only | mandatory | The number of bridge logger on this system. |
| 1.3.6.1.4.1.327.1.1.5.4 | TablebrgLoggerTable | not-accessible | mandatory | This table contains bridge logger information. Each entry corresponds to a logging description. Each logging description can consist of up to four conditions. … |
| 1.3.6.1.4.1.327.1.1.5.4.1 | RowbrgLoggerEntry | not-accessible | mandatory | A description of bridge logger. |
| 1.3.6.1.4.1.327.1.1.5.4.1.1 | ColumnbrgLoggerIndex | read-only | mandatory | A sequentally assigned index value for each entry. |
| 1.3.6.1.4.1.327.1.1.5.4.1.2 | ColumnbrgLoggerName | read-write | mandatory | A unique user-recognizable name for each remote bridge logger defined. |
| 1.3.6.1.4.1.327.1.1.5.4.1.3 | ColumnbrgLoggerType | read-write | mandatory | The validity of this logger entry. |
| 1.3.6.1.4.1.327.1.1.5.4.1.4 | ColumnbrgLoggerMask1Offset | read-write | mandatory | The byte offset of the 4th mask of this logger. |
| 1.3.6.1.4.1.327.1.1.5.4.1.5 | ColumnbrgLoggerMask1Value | read-write | mandatory | The value of the 4th mask of this logger. This can be a byte, word or long value. |
| 1.3.6.1.4.1.327.1.1.5.4.1.6 | ColumnbrgLoggerMask1Type | read-write | mandatory | The type of the 4th mask of this logger. |
| 1.3.6.1.4.1.327.1.1.5.4.1.7 | ColumnbrgLoggerMask1Size | read-write | mandatory | The size (number of bytes covered by this mask) of the 1st mask of this logger. |
| 1.3.6.1.4.1.327.1.1.5.4.1.8 | ColumnbrgLoggerMask2Offset | read-write | mandatory | The byte offset of the 4th mask of this logger. |
| 1.3.6.1.4.1.327.1.1.5.4.1.9 | ColumnbrgLoggerMask2Value | read-write | mandatory | The value of the 4th mask of this logger. This can be a byte, word or long value. |
| 1.3.6.1.4.1.327.1.1.5.4.1.10 | ColumnbrgLoggerMask2Type | read-write | mandatory | The type of the 4th mask of this logger. |
| 1.3.6.1.4.1.327.1.1.5.4.1.11 | ColumnbrgLoggerMask2Size | read-write | mandatory | The size (number of bytes covered by this mask) of the 2nd mask of this logger. |
| 1.3.6.1.4.1.327.1.1.5.4.1.12 | ColumnbrgLoggerMask3Offset | read-write | mandatory | The byte offset of the 4th mask of this logger. |
| 1.3.6.1.4.1.327.1.1.5.4.1.13 | ColumnbrgLoggerMask3Value | read-write | mandatory | The value of the 4th mask of this logger. This can be a byte, word or long value. |
| 1.3.6.1.4.1.327.1.1.5.4.1.14 | ColumnbrgLoggerMask3Type | read-write | mandatory | The type of the 4th mask of this logger. |
| 1.3.6.1.4.1.327.1.1.5.4.1.15 | ColumnbrgLoggerMask3Size | read-write | mandatory | The size (number of bytes covered by this mask) of the 3rd mask of this logger. |
| 1.3.6.1.4.1.327.1.1.5.4.1.16 | ColumnbrgLoggerMask4Offset | read-write | mandatory | The byte offset of the 4th mask of this logger. |
| 1.3.6.1.4.1.327.1.1.5.4.1.17 | ColumnbrgLoggerMask4Value | read-write | mandatory | The value of the 4th mask of this logger. This can be a byte, word or long value. |
| 1.3.6.1.4.1.327.1.1.5.4.1.18 | ColumnbrgLoggerMask4Type | read-write | mandatory | The type of the 4th mask of this logger. |
| 1.3.6.1.4.1.327.1.1.5.4.1.19 | ColumnbrgLoggerMask4Size | read-write | mandatory | The size (number of bytes covered by this mask) of the 4th mask of this logger. |
| 1.3.6.1.4.1.327.1.1.5.4.1.20 | ColumnbrgLoggerSkipRii | read-write | mandatory | Specifying if source route field should be skipped for logger offset. |
| 1.3.6.1.4.1.327.1.1.5.5 | ScalarbrgPLocalNumber | read-only | mandatory | The number of local bridge path on this system. |
| 1.3.6.1.4.1.327.1.1.5.6 | TablebrgPLocalTable | not-accessible | mandatory | This table contains bridge path (equivalent to port in 802.1d specification) information. |
| 1.3.6.1.4.1.327.1.1.5.6.1 | RowbrgPLocalEntry | not-accessible | mandatory | A description of bridge path entry. |
| 1.3.6.1.4.1.327.1.1.5.6.1.1 | ColumnbrgPLocalIndex | read-only | mandatory | The path on which the entry's equivalence is effective. The path identified by a particular value of this index is the same path as identified by the same valu… |
| 1.3.6.1.4.1.327.1.1.5.6.1.2 | ColumnbrgPLocalEnabled | read-write | mandatory | Enable this path as one of the bridge port. |
| 1.3.6.1.4.1.327.1.1.5.6.1.3 | ColumnbrgStpPLocalPriority | read-write | mandatory | The value of the priority field which is contained in the first octet of the Port ID. The other octet of the Port ID is given by the value of brgPLocalIndex. |
| 1.3.6.1.4.1.327.1.1.5.6.1.4 | ColumnbrgStpPLocalCost | read-write | mandatory | The contribution of this port to the path cost of paths towards the spanning tree root which include this port. |
| 1.3.6.1.4.1.327.1.1.5.6.1.5 | ColumnbrgStpPLocalDesigRoot | read-only | mandatory | The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the po… |
| 1.3.6.1.4.1.327.1.1.5.6.1.6 | ColumnbrgStpPLocalDesigCost | read-only | mandatory | The path cost of the Designated Port of the segment connected to the port. This value is compared to the Root Path Cost field in received bridge PDUs. |
| 1.3.6.1.4.1.327.1.1.5.6.1.7 | ColumnbrgStpPLocalDesigBridge | read-only | mandatory | The Bridge ID of the bridge which this port considers to be the Designated Bridge for this port's segment. |
| 1.3.6.1.4.1.327.1.1.5.6.1.8 | ColumnbrgStpPLocalDesigPath | read-only | mandatory | The Port ID of the port on the Designated Bridge for this port's segment. |
| 1.3.6.1.4.1.327.1.1.5.6.1.9 | ColumnbrgStpPLocalPathState | read-only | mandatory | The Spanning Tree state of the port. |
| 1.3.6.1.4.1.327.1.1.5.7 | ScalarbrgPRmtNumber | read-only | mandatory | The number of remote bridge path on this system. |
| 1.3.6.1.4.1.327.1.1.5.8 | TablebrgPRmtTable | not-accessible | mandatory | This table contains bridge path (equivalent to port in 802.1d specification) information. |
| 1.3.6.1.4.1.327.1.1.5.8.1 | RowbrgPRmtEntry | not-accessible | mandatory | A description of bridge path entry. |
| 1.3.6.1.4.1.327.1.1.5.8.1.1 | ColumnbrgPRmtIndex | read-only | mandatory | The path on which the entry's equivalence is effective. The path identified by a particular value of this index is the same path as identified by the same valu… |
| 1.3.6.1.4.1.327.1.1.5.8.1.2 | ColumnbrgPRmtEnabled | read-write | mandatory | Enable this path as one of the bridge port. |
| 1.3.6.1.4.1.327.1.1.5.8.1.3 | ColumnbrgStpPRmtPriority | read-write | mandatory | The value of the priority field which is contained in the first octet of the Port ID. The other octet of the Port ID is given by the value of brgPRmtIndex. |
| 1.3.6.1.4.1.327.1.1.5.8.1.4 | ColumnbrgStpPRmtCost | read-write | mandatory | The contribution of this port to the path cost of paths towards the spanning tree root which include this port. |
| 1.3.6.1.4.1.327.1.1.5.8.1.5 | ColumnbrgStpPRmtDesigRoot | read-only | mandatory | The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the po… |
| 1.3.6.1.4.1.327.1.1.5.8.1.6 | ColumnbrgStpPRmtDesigCost | read-only | mandatory | The path cost of the Designated Port of the segment connected to the port. This value is compared to the Poot Path Cost field in received bridge PDUs. |
| 1.3.6.1.4.1.327.1.1.5.8.1.7 | ColumnbrgStpPRmtDesigBridge | read-only | mandatory | The Bridge ID of the bridge which this port considers to be the Designated Bridge for this port's segment. |
| 1.3.6.1.4.1.327.1.1.5.8.1.8 | ColumnbrgStpPRmtDesigPath | read-only | mandatory | The Port ID of the port on the Designated Bridge for this port's segment. |
| 1.3.6.1.4.1.327.1.1.5.8.1.9 | ColumnbrgStpPRmtPathState | read-only | mandatory | The Spanning Tree state of the port. |
| 1.3.6.1.4.1.327.1.1.5.9 | NodebrgMisc | |||
| 1.3.6.1.4.1.327.1.1.5.9.1 | ScalarbrgSpanningTreeProtocol | read-write | mandatory | This flag controls whether Spanning Tree protocol feature be enabled in this node. |
| 1.3.6.1.4.1.327.1.1.5.9.2 | ScalarbrgResetAllCounters | read-write | mandatory | Writing any value to this variable will reset all brg-related counters to zero. |
| 1.3.6.1.4.1.327.1.1.5.9.3 | ScalarbrgAutoFtrEnabled | read-write | mandatory | This flag controls whether auto filter feature is enabled in this node. |
| 1.3.6.1.4.1.327.1.1.5.9.4 | ScalarbrgPRPASmartFiltering | read-write | mandatory | This enables/disables AccessBuilder's Smart Filtering feature. |
| 1.3.6.1.4.1.327.1.1.5.9.5 | ScalarbrgPRPAFilterAction | read-write | mandatory | The action to be taken for all remote access path's filters. |
| 1.3.6.1.4.1.327.1.1.5.9.6 | ScalarbrgPRPAFilterMap | read-write | mandatory | This is a 16 bit bitmap corresponds to the bridge filter table. |
| 1.3.6.1.4.1.327.1.1.5.9.7 | ScalarbrgPRPALoggerMap | read-write | mandatory | This is a 16 bit bitmap corresponds to the bridge logger table. |
| 1.3.6.1.4.1.327.1.1.5.9.8 | ScalarbrgMacHdrComp | read-write | mandatory | Turn on/off bridge MAC header compression. |
| 1.3.6.1.4.1.327.1.1.5.10 | TablebrgLearnedTable | not-accessible | mandatory | Spanning tree bridge port table. |
| 1.3.6.1.4.1.327.1.1.5.10.1 | RowbrgLearnedEntry | not-accessible | mandatory | A list of information for a learned address entry. |
| 1.3.6.1.4.1.327.1.1.5.10.1.1 | ColumnbrgLearnedAddress | read-only | mandatory | A MAC address for the bridge has learned. |
| 1.3.6.1.4.1.327.1.1.5.10.1.2 | ColumnbrgLearnedPathType | read-only | mandatory | The variable indicates from which path table (local or remote) this address is leaned. |
| 1.3.6.1.4.1.327.1.1.5.10.1.3 | ColumnbrgLearnedPathIdx | read-only | mandatory | The path on which the entry's equivalence is effective. The path identified by a particular value of this index is the same route path as identified by the sam… |
| 1.3.6.1.4.1.327.1.1.5.10.1.4 | ColumnbrgLearnedAge | read-only | mandatory | The relative newness of the learned address. |
| 1.3.6.1.4.1.327.1.1.5.11 | NodebrgTokenRing | |||
| 1.3.6.1.4.1.327.1.1.5.11.1 | ScalarbrgLocalRingNumber | read-write | mandatory | The ring number on LAN side interface of the AccessBuilder. |
| 1.3.6.1.4.1.327.1.1.5.11.2 | ScalarbrgProxyRingNumber | read-write | mandatory | The ring number on WAN side interface of the AccessBuilder. |
| 1.3.6.1.4.1.327.1.1.5.11.3 | ScalarbrgBridgeNumber | read-write | mandatory | The bridge number assigned to AccessBuilder. |
| 1.3.6.1.4.1.327.1.1.6 | Nodeadmin | |||
| 1.3.6.1.4.1.327.1.1.6.1 | ScalaradminUserNumber | read-only | mandatory | The number of users registered on this system. |
| 1.3.6.1.4.1.327.1.1.6.2 | TableadminUserTable | not-accessible | mandatory | User table. |
| 1.3.6.1.4.1.327.1.1.6.2.1 | RowadminUserEntry | not-accessible | mandatory | A list of information for a user. |
| 1.3.6.1.4.1.327.1.1.6.2.1.1 | ColumnadminUserIndex | read-only | mandatory | A sequentally assigned index value for each entry. |
| 1.3.6.1.4.1.327.1.1.6.2.1.2 | ColumnadminUserName | read-write | mandatory | The user login name. |
| 1.3.6.1.4.1.327.1.1.6.2.1.3 | ColumnadminUserType | read-write | mandatory | This value controls whether the user be given superuser, administrator or regular user priviledge while in User Interface session. |
| 1.3.6.1.4.1.327.1.1.6.2.1.4 | ColumnadminUserPassword | read-only | mandatory | The user login password. |
| 1.3.6.1.4.1.327.1.1.6.2.1.5 | ColumnadminUserCallBackPhone | read-only | mandatory | This string controls whether the system should disconnect the line and call back to the user for security reason. If this is a NULL string, the system does not… |
| 1.3.6.1.4.1.327.1.1.6.2.1.6 | ColumnadminEncryptUserPassword | read-write | mandatory | The encrypted user password is for configurator to change user password by a authentication algorithm. |
| 1.3.6.1.4.1.327.1.1.6.2.1.7 | ColumnadminEncryptCallBackPhone | read-write | mandatory | The encrypted call back phone no. is for configurator to change user password by a authentication algorithm. |
| 1.3.6.1.4.1.327.1.1.6.3 | ScalaradminCommNumber | read-only | mandatory | The number of SNMP communities defined on this system. |
| 1.3.6.1.4.1.327.1.1.6.4 | TableadminCommTable | not-accessible | mandatory | SNMP community table. |
| 1.3.6.1.4.1.327.1.1.6.4.1 | RowadminCommEntry | not-accessible | mandatory | A list of information for a SNMP community. |
| 1.3.6.1.4.1.327.1.1.6.4.1.1 | ColumnadminCommIndex | read-only | mandatory | A sequentally assigned index value for each entry. |
| 1.3.6.1.4.1.327.1.1.6.4.1.2 | ColumnadminCommName | read-write | mandatory | The community name. |
| 1.3.6.1.4.1.327.1.1.6.4.1.3 | ColumnadminCommType | read-write | mandatory | The community's access type. |
| 1.3.6.1.4.1.327.1.1.6.4.1.4 | ColumnadminCommMgrIpAddress | read-write | mandatory | The community network manager's IP address. |
| 1.3.6.1.4.1.327.1.1.6.4.1.5 | ColumnadminCommMgrIpxNetNumber | read-write | mandatory | The community network manager's IPX network ID. |
| 1.3.6.1.4.1.327.1.1.6.4.1.6 | ColumnadminCommMgrMacAddress | read-write | mandatory | The community network manager's MAC address |
| 1.3.6.1.4.1.327.1.1.6.5 | ScalaradminScriptNumber | read-only | mandatory | The number of dialing scripts on this system. |
| 1.3.6.1.4.1.327.1.1.6.6 | TableadminScriptTable | not-accessible | mandatory | Dialing script table. |
| 1.3.6.1.4.1.327.1.1.6.6.1 | RowadminScriptEntry | not-accessible | mandatory | A list of dialing script information. |
| 1.3.6.1.4.1.327.1.1.6.6.1.1 | ColumnadminScriptIndex | read-only | mandatory | A sequentally assigned index value for each entry. |
| 1.3.6.1.4.1.327.1.1.6.6.1.2 | ColumnadminScriptName | read-only | mandatory | The name of the script. |
| 1.3.6.1.4.1.327.1.1.6.6.1.3 | ColumnadminScriptType | read-write | mandatory | The script's type. A built-in script's type can not be changed. |
| 1.3.6.1.4.1.327.1.1.6.6.1.4 | ColumnadminScript | read-write | mandatory | The connection control string. |
| 1.3.6.1.4.1.327.1.1.6.7 | ScalaradminRpaLogNumber | read-only | mandatory | The number of remote PC access session log entries in this system. |
| 1.3.6.1.4.1.327.1.1.6.8 | TableadminRpaLogTable | not-accessible | mandatory | Remote PC access session log table. |
| 1.3.6.1.4.1.327.1.1.6.8.1 | RowadminRpaLogEntry | not-accessible | mandatory | A list of logged remote PC access session information. |
| 1.3.6.1.4.1.327.1.1.6.8.1.1 | ColumnadminRpaLogIndex | read-only | mandatory | A sequentally assigned index value for each entry. Index 32 always points to the most-recently completed remote PC access session. |
| 1.3.6.1.4.1.327.1.1.6.8.1.2 | ColumnadminRpaLogUserName | read-only | mandatory | The name of the logged-in user. |
| 1.3.6.1.4.1.327.1.1.6.8.1.3 | ColumnadminRpaLogTime | read-only | mandatory | The start time (in HH:MM:SS) of this session. |
| 1.3.6.1.4.1.327.1.1.6.8.1.4 | ColumnadminRpaLogDuration | read-only | mandatory | The elapsed time (in HH:MM:SS) of this session. |
| 1.3.6.1.4.1.327.1.1.6.8.1.5 | ColumnadminRpaLogAttempts | read-only | mandatory | Number of unsuccessful login attempts in this authentication process. |
| 1.3.6.1.4.1.327.1.1.6.8.1.6 | ColumnadminRpaLogInPackets | read-only | mandatory | Number of correctly received packets in this session. |
| 1.3.6.1.4.1.327.1.1.6.8.1.7 | ColumnadminRpaLogOutPackets | read-only | mandatory | Number of correctly transmitted packets in this session. |
| 1.3.6.1.4.1.327.1.1.6.8.1.8 | ColumnadminRpaLogInBytes | read-only | mandatory | Number of correctly received bytes in this session. |
| 1.3.6.1.4.1.327.1.1.6.8.1.9 | ColumnadminRpaLogOutBytes | read-only | mandatory | Number of correctly transmitted bytes in this session. |
| 1.3.6.1.4.1.327.1.1.6.8.1.10 | ColumnadminRpaLogParityErrors | read-only | mandatory | Number of characters received with parity error in this session. |
| 1.3.6.1.4.1.327.1.1.6.8.1.11 | ColumnadminRpaLogFrameErrors | read-only | mandatory | Number of characters received with framing error in this session. |
| 1.3.6.1.4.1.327.1.1.6.8.1.12 | ColumnadminRpaLogOverrunErrors | read-only | mandatory | Number of receive overrun errors in this session. |
| 1.3.6.1.4.1.327.1.1.6.8.1.13 | ColumnadminRpaLogCksumErrors | read-only | mandatory | Number of receive checksum errors in this session. |
| 1.3.6.1.4.1.327.1.1.6.8.1.14 | ColumnadminRpaLogDate | read-only | mandatory | The start date (in MM/DD/YY) of this session. |
| 1.3.6.1.4.1.327.1.1.6.8.1.15 | ColumnadminRpaLogPortName | read-only | mandatory | The binding portname of this session. |
| 1.3.6.1.4.1.327.1.1.6.8.1.16 | ColumnadminRpaLogPathName | read-only | mandatory | The binding pathname of this session. |
| 1.3.6.1.4.1.327.1.1.6.9 | NodeadminMisc | |||
| 1.3.6.1.4.1.327.1.1.6.9.1 | ScalaradminSysDescr | read-only | mandatory | Same as sysDescr in MIB II. |
| 1.3.6.1.4.1.327.1.1.6.9.2 | ScalaradminNodeName | read-write | mandatory | The login ID that is transmitted by this node to a remote router at connection establishing time. If the string is not what the remote router expects, the conn… |
| 1.3.6.1.4.1.327.1.1.6.9.3 | ScalaradminNodePassword | read-only | mandatory | The password that is transmitted by this node to a remote router after login ID at connection establishing time. If the string is not what the remote router ex… |
| 1.3.6.1.4.1.327.1.1.6.9.4 | ScalaradminDate | read-write | mandatory | Current date in mm/dd/yy format. |
| 1.3.6.1.4.1.327.1.1.6.9.5 | ScalaradminTime | read-write | mandatory | Current time in hh:mm:ss format. |
| 1.3.6.1.4.1.327.1.1.6.9.6 | ScalaradminGreeting | read-write | mandatory | A user-defined text that is displayed when a user logs into User Interface process. |
| 1.3.6.1.4.1.327.1.1.6.9.7 | ScalaradminPrompt | read-write | mandatory | An user-defined prompt string for this node's User Interface process. Note: This one is obsoleted after version 3.1 or later |
| 1.3.6.1.4.1.327.1.1.6.9.8 | ScalaradminSNMPGetFrom | read-write | mandatory | The value controls the type value returned to an SNMP GET command. Setting this to '1' requests that the current operational value of this variable is returned… |
| 1.3.6.1.4.1.327.1.1.6.9.9 | ScalaradminDoIntegrity | read-write | mandatory | A write to this variable (value don't care) cause an integrity check on all the configuration parameters. The result is given through a GET of this variable. |
| 1.3.6.1.4.1.327.1.1.6.9.10 | ScalaradminDoFileload | read-write | mandatory | A write to this variable (value don't care) cause a fileload (upload or download depending on LoadFileName) operation to start. The result is given through a G… |
| 1.3.6.1.4.1.327.1.1.6.9.11 | ScalaradminLoadfileName | read-write | mandatory | The name of the file upon which the file-load operation is to be operated. |
| 1.3.6.1.4.1.327.1.1.6.9.13 | ScalaradminLastTrap | read-only | mandatory | The last trap message contents. |
| 1.3.6.1.4.1.327.1.1.6.9.14 | ScalaradminResetAllUserCounters | read-write | mandatory | Writing any value to this variable will reset all User-related counters to zero. |
| 1.3.6.1.4.1.327.1.1.6.9.15 | ScalaradminEraseConfig | read-write | mandatory | Erase all configuration data in EEPROM. |
| 1.3.6.1.4.1.327.1.1.6.9.16 | ScalaradminUIMsgLevel | read-write | mandatory | This variable controls type of system messages to be displayed on system console. Messages of priority equals or higher than the specified level are displayed. |
| 1.3.6.1.4.1.327.1.1.6.9.17 | ScalaradminSNMPMsgLevel | read-write | mandatory | This variable controls type of system messages to be sent to SNMP management stations. Messages of priority equals or higher than the specified level are sent. |
| 1.3.6.1.4.1.327.1.1.6.9.18 | ScalaradminLoginOption | read-write | mandatory | This variable enable the login sequence on async ports. |
| 1.3.6.1.4.1.327.1.1.6.9.19 | ScalaradminReboot | read-write | mandatory | Reboot the AccessBuilder server. |
| 1.3.6.1.4.1.327.1.1.6.9.20 | ScalaradminMajorVersion | read-only | mandatory | AccessBuilder software Major version. |
| 1.3.6.1.4.1.327.1.1.6.9.21 | ScalaradminMinorVersion | read-only | mandatory | AccessBuilder software Minor version. |
| 1.3.6.1.4.1.327.1.1.6.9.22 | ScalaradminMIBVersion | read-only | mandatory | This MIB version. |
| 1.3.6.1.4.1.327.1.1.6.9.23 | ScalaradminTimeZone | read-write | mandatory | Time difference between local time zone and Greenwich time (in minutes). |
| 1.3.6.1.4.1.327.1.1.6.9.24 | ScalaradminSecurityServerType | read-only | mandatory | Enables authentication through security helpers instead of local user database. |
| 1.3.6.1.4.1.327.1.1.6.9.25 | ScalaradminSecPassword | read-only | mandatory | The password is used to set up a session with security helpers. |
| 1.3.6.1.4.1.327.1.1.6.9.26 | ScalaradminScrtyClntIpAddr | read-only | mandatory | The primary security helper's IP address. |
| 1.3.6.1.4.1.327.1.1.6.9.27 | ScalaradminSecondScrtyClntIpAddr | read-only | mandatory | The secondary security helper's IP address. |
| 1.3.6.1.4.1.327.1.1.6.9.28 | ScalaradminUdpPort | read-only | mandatory | This is the UDP port for the security helper protocol. |
| 1.3.6.1.4.1.327.1.1.6.9.29 | ScalaradminTelnetAdminPort | read-write | mandatory | This is the telnet administration port for dialout function. |
| 1.3.6.1.4.1.327.1.1.6.9.30 | ScalaradminTelnetDialOutAuth | read-write | mandatory | Enables authentication for dialout function. |
| 1.3.6.1.4.1.327.1.1.6.9.31 | ScalaradminDialOutEnabled | read-write | mandatory | Enables dialout function. |
| 1.3.6.1.4.1.327.1.1.6.9.32 | ScalaradminEncryptNodePassword | read-write | mandatory | The encrypted node password is for configurator to change node password by a authentication algorithm. |
| 1.3.6.1.4.1.327.1.1.6.9.33 | ScalaradminEncryptSecurityServerType | read-write | mandatory | The encrypted security server type is for configurator to change security server type by a authentication algorithm. |
| 1.3.6.1.4.1.327.1.1.6.9.34 | ScalaradminEncryptSecPassword | read-write | mandatory | The encrypted security password is for configurator to change security password by a authentication algorithm. |
| 1.3.6.1.4.1.327.1.1.6.9.35 | ScalaradminEncryptScrtyClntIpAddr | read-write | mandatory | The encrypted helper IP address is for configurator to change helper IP address by a authentication algorithm. |
| 1.3.6.1.4.1.327.1.1.6.9.36 | ScalaradminEncryptSecondScrtyClntIpAddr | read-write | mandatory | The encrypted secondary helper IP address is for configurator to change secondary helper IP address by a authentication algorithm. |
| 1.3.6.1.4.1.327.1.1.6.9.37 | ScalaradminEncryptUdpPort | read-write | mandatory | The encrypted helper UDP port is for configurator to change helper UDP port by a authentication algorithm. |
| 1.3.6.1.4.1.327.1.1.6.9.38 | ScalaradminEPromSize | read-only | mandatory | This is the EProm size on the mother board. |
| 1.3.6.1.4.1.327.1.1.6.9.39 | ScalaradminNVRamSize | read-only | mandatory | This is the Non-Volatile Ram (EEProm) size on the mother board. |
| 1.3.6.1.4.1.327.1.1.6.9.40 | ScalaradminFlashRomSize | read-only | mandatory | This is the Flash Rom size on the mother board. |
| 1.3.6.1.4.1.327.1.1.6.9.41 | ScalaradminLocalDRamSize | read-only | mandatory | This is the Local DRam size on the mother board. |
| 1.3.6.1.4.1.327.1.1.6.9.42 | ScalaradminSharedDRamSize | read-only | mandatory | This is the Shared DRam size on the mother board. |
| 1.3.6.1.4.1.327.1.1.6.9.43 | ScalaradminHWRev | read-only | mandatory | This is the hardware revision on mother board. |
| 1.3.6.1.4.1.327.1.1.6.9.44 | ScalaradminEncryptSuperUserPassword | read-only | mandatory | The encrypted superuser password is for configurator to get the superuser password. |
| 1.3.6.1.4.1.327.1.1.6.9.45 | ScalaradminNewGreeting | read-write | mandatory | A user-defined text that is displayed when a user logs into User Interface process. |
| 1.3.6.1.4.1.327.1.1.6.9.46 | ScalaradminTFTPServerIpAddr | read-write | mandatory | The TFTP server's IP address. |
| 1.3.6.1.4.1.327.1.1.6.9.47 | ScalaradminSaveConfig | read-write | mandatory | A write to this variable (value don't care) cause a save configuration operation to start. The result is given through a GET of this variable. |
| 1.3.6.1.4.1.327.1.1.6.9.48 | ScalaradminMaintenanceVersion | read-only | mandatory | AccessBuilder software Maintenance version. |
| 1.3.6.1.4.1.327.1.1.6.9.49 | ScalaradminCheckConsoleModem | read-write | mandatory | Check the status of console modem. |
| 1.3.6.1.4.1.327.1.1.6.9.50 | ScalaradminConsoleImageDownload | read-write | mandatory | Download image by console port. |
| 1.3.6.1.4.1.327.1.1.6.9.51 | ScalaradminConsoleConfigUpload | read-write | mandatory | Upload configuration by console port. |
| 1.3.6.1.4.1.327.1.1.6.9.52 | ScalaradminConsoleConfigDownload | read-write | mandatory | Download configuration by console port. |
| 1.3.6.1.4.1.327.1.1.6.9.53 | ScalaradminRasIdleTime | read-write | mandatory | The idle time to start spoofing for ras port. |
| 1.3.6.1.4.1.327.1.1.6.9.54 | ScalaradminRouterIdleTime | read-write | mandatory | The idle time to start spoofing for router port. |
| 1.3.6.1.4.1.327.1.1.6.9.55 | ScalaradminRasSpoofTime | read-write | mandatory | The time to spoof for ras port. |
| 1.3.6.1.4.1.327.1.1.6.9.56 | ScalaradminRouterSpoofTime | read-write | mandatory | The time to spoof for router port. |
| 1.3.6.1.4.1.327.1.1.6.9.57 | ScalaradminLnkUtilHighThld | read-write | mandatory | Link utilization high threshold. |
| 1.3.6.1.4.1.327.1.1.6.9.58 | ScalaradminLnkUtilLowThld | read-write | mandatory | Link utilization low threshold. |
| 1.3.6.1.4.1.327.1.1.6.9.59 | ScalaradminCallerIdCheck | read-write | mandatory | Indicate to check caller id or not. |
| 1.3.6.1.4.1.327.1.1.6.9.60 | ScalaradminISDNRequiredBaudrate | read-write | mandatory | For baudrate adaption of ISDN call. |
| 1.3.6.1.4.1.327.1.1.6.9.61 | ScalaradminRouterCCPEnabled | read-write | mandatory | Turn on/off CCP for remotepath. |
| 1.3.6.1.4.1.327.1.1.6.9.62 | ScalaradminSuggestFlag | read-write | mandatory | Turn on/off for ignoring some trivial error message. |
| 1.3.6.1.4.1.327.1.1.6.9.63 | ScalaradminEEVersionNo | read-only | mandatory | The EE version number, format is Major, Miror, Maintence and Patch |
| 1.3.6.1.4.1.327.1.1.6.10 | ScalaradminMdSetupNumber | read-only | mandatory | The number of dialing Modem Setups on this system; this table serves as a template to create 'real' modem script. |
| 1.3.6.1.4.1.327.1.1.6.11 | TableadminMdSetupTable | not-accessible | mandatory | Dialing Modem Setup table. |
| 1.3.6.1.4.1.327.1.1.6.11.1 | RowadminMdSetupEntry | not-accessible | mandatory | A list of dialing Modem Setup information. |
| 1.3.6.1.4.1.327.1.1.6.11.1.1 | ColumnadminMdSetupIndex | read-only | mandatory | A sequentally assigned index value for each entry. |
| 1.3.6.1.4.1.327.1.1.6.11.1.2 | ColumnadminMdSetupType | read-write | mandatory | The Modem Setup's type. A built-in Modem Setup's type can not be changed. This type has to be set to user-defined before set the following entries. |
| 1.3.6.1.4.1.327.1.1.6.11.1.3 | ColumnadminMdSetupName | read-write | mandatory | The name of the Modem Setup. Once congifured, this name can not be changed |
| 1.3.6.1.4.1.327.1.1.6.11.1.4 | ColumnadminMdSetupATCmd | read-write | mandatory | The AT config command string. |
| 1.3.6.1.4.1.327.1.1.6.11.1.5 | ColumnadminMdSetupARAP1-0ATCmd | read-write | mandatory | The AT config command string for ARAP1.0. |
| 1.3.6.1.4.1.327.1.1.6.11.1.6 | ColumnadminMdSetupIncomingCall | read-write | mandatory | The In Coming call Indication: ri signal or 'ring' text |
| 1.3.6.1.4.1.327.1.1.6.11.1.7 | ColumnadminMdSetupConnIndication | read-write | mandatory | The In Connect Indication: DCD signal or 'connect' text |
| 1.3.6.1.4.1.327.1.1.6.11.1.8 | ColumnadminMdSetupCallTimeOut | read-write | mandatory | The Call Time Out interval: 0 - 255 sec |
| 1.3.6.1.4.1.327.1.1.6.11.1.9 | ColumnadminMdSetupCallDelay | read-write | mandatory | The Call Setup Delay interval: 0 - 120000 msec |
| 1.3.6.1.4.1.327.1.1.6.12 | ScalaradminCallerIDNumber | read-only | mandatory | Caller Id Number. |
| 1.3.6.1.4.1.327.1.1.6.13 | TableadminCallerIDTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.327.1.1.6.13.1 | RowadminCallerIDEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.327.1.1.6.13.1.1 | ColumnadminCallerIDIndex | read-only | mandatory | A sequentally assigned index value for each entry. |
| 1.3.6.1.4.1.327.1.1.6.13.1.2 | ColumnadminCallerIDName | read-write | mandatory | |
| 1.3.6.1.4.1.327.1.1.6.13.1.3 | ColumnadminCallerIDType | read-write | mandatory | |
| 1.3.6.1.4.1.327.1.1.6.13.1.4 | ColumnadminCallerIDComment | read-write | mandatory | |
| 1.3.6.1.4.1.327.1.1.7 | Nodecrat | |||
| 1.3.6.1.4.1.327.1.1.7.1 | NodeatRpa | |||
| 1.3.6.1.4.1.327.1.1.7.1.1 | ScalaratRpaNumber | read-only | mandatory | The number of AppleTalk (AT) remote PC paths on this system. |
| 1.3.6.1.4.1.327.1.1.7.1.2 | TableatRpaTable | not-accessible | mandatory | Remote PC access path table. |
| 1.3.6.1.4.1.327.1.1.7.1.2.1 | RowatRpaEntry | not-accessible | mandatory | A path to a remote PC. |
| 1.3.6.1.4.1.327.1.1.7.1.2.1.1 | ColumnatRpaIndex | read-only | mandatory | The RPA path on which the entry's equivalence is effective. The path identified by a particular value of this index is the same RPA path as identified by the s… |
| 1.3.6.1.4.1.327.1.1.7.1.2.1.2 | ColumnatRpaNetworkAddress | read-only | mandatory | The current or last logged-in remote PC's AT address. |
| 1.3.6.1.4.1.327.1.1.7.1.2.1.3 | ColumnatRpaState | read-only | mandatory | The state of ARA connection |
| 1.3.6.1.4.1.327.1.1.7.1.3 | ScalaratRpaDialInZone | read-write | mandatory | The name of specific zone for the remote Mac Users; Note: reboot to take effect |
| 1.3.6.1.4.1.327.1.1.7.1.4 | ScalaratRpaMaxConnTime | read-write | mandatory | The time interval of a seesion is allowed after login, in minutes; 1 to 65,535; 0 = no limit |
| 1.3.6.1.4.1.327.1.1.7.1.5 | ScalaratRpaNoNbpMulticast | read-write | mandatory | Whether to discard NBP multicast packets |
| 1.3.6.1.4.1.327.1.1.7.2 | NodeatRt | |||
| 1.3.6.1.4.1.327.1.1.7.2.1 | ScalaratPLocalNumber | read-only | mandatory | The number of AT dynamic routes on this system. |
| 1.3.6.1.4.1.327.1.1.7.2.2 | TableatPLocalTable | not-accessible | mandatory | AT dynamic route table. |
| 1.3.6.1.4.1.327.1.1.7.2.2.1 | RowatPLocalEntry | not-accessible | mandatory | A list of information for a AT dynamic route. |
| 1.3.6.1.4.1.327.1.1.7.2.2.1.1 | ColumnatPLocalIndex | read-only | mandatory | The route path on which the entry's equivalence is effective. The path identified by a particular value of this index is the same route path as identified by t… |
| 1.3.6.1.4.1.327.1.1.7.2.2.1.2 | ColumnatPLocalNetAddress | read-only | mandatory | The current or last logged-in remote PC's AT address. |
| 1.3.6.1.4.1.327.1.1.7.2.2.1.3 | ColumnatPLocalNetStart | read-only | mandatory | The current or last logged-in remote PC's AT address. |
| 1.3.6.1.4.1.327.1.1.7.2.2.1.4 | ColumnatPLocalNetEnd | read-only | mandatory | The current or last logged-in remote PC's AT address. |
| 1.3.6.1.4.1.327.1.1.7.2.2.1.5 | ColumnatPLocalDefaultRouter | read-only | mandatory | The current or last logged-in remote PC's AT address. |
| 1.3.6.1.4.1.327.1.1.7.2.2.1.6 | ColumnatPLocalLocalZone | read-only | mandatory | The current or last logged-in remote PC's AT address. |
| 1.3.6.1.4.1.327.1.1.7.2.3 | TableatAarpTable | not-accessible | mandatory | The AT Address Translation table used for mapping from AT addresses to physical addresses. |
| 1.3.6.1.4.1.327.1.1.7.2.3.1 | RowatAarpEntry | not-accessible | mandatory | Each entry contains one AT Address to `physical' address equivalence. |
| 1.3.6.1.4.1.327.1.1.7.2.3.1.1 | ColumnatAarpIfIndex | read-only | mandatory | The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified … |
| 1.3.6.1.4.1.327.1.1.7.2.3.1.2 | ColumnatAarpPhysAddress | read-only | mandatory | The media-dependent `physical' address. |
| 1.3.6.1.4.1.327.1.1.7.2.3.1.3 | ColumnatAarpNetAddress | read-only | mandatory | The AtAddress corresponding to the media- dependent `physical' address. |
| 1.3.6.1.4.1.327.1.1.7.2.4 | TableatBestRouterCacheTable | not-accessible | mandatory | The table for efficiently forwarding AT packets to remote networks. |
| 1.3.6.1.4.1.327.1.1.7.2.4.1 | RowatBestRouterCacheEntry | not-accessible | mandatory | Each entry contains one AT Address and router physical address. |
| 1.3.6.1.4.1.327.1.1.7.2.4.1.1 | ColumnatBestRouterCacheIfIndex | read-only | mandatory | The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified … |
| 1.3.6.1.4.1.327.1.1.7.2.4.1.2 | ColumnatBestRouterCachePhysAddress | read-only | mandatory | The host address of the next router a packet should go through to reach the specified AppleTalk. |
| 1.3.6.1.4.1.327.1.1.7.2.4.1.3 | ColumnatBestRouterCacheNetAddress | read-only | mandatory | The At Address for recently learned routers on the same network segment as the AccessBuilder. |
| 1.3.6.1.4.1.327.1.1.7.2.5 | ScalaratRtProtocolEnabled | read-write | mandatory | ARAP protocol enable/disable flag. |
| 1.3.6.1.4.1.327.1.1.7.2.6 | ScalaratRtInPackets | read-only | mandatory | AT packets received with no error. |
| 1.3.6.1.4.1.327.1.1.7.2.7 | ScalaratRtOutPackets | read-only | mandatory | AT packets transmitted with no error. |
| 1.3.6.1.4.1.327.1.1.7.2.8 | ScalaratRtResetAllCounters | read-write | mandatory | Writing any value to this variable will reset all port-related counters to zero. |
| 1.3.6.1.4.1.327.1.1.7.2.9 | ScalaratRtZoneFilterAction | read-write | mandatory | This variable indicate the operation of zone filter. |
| 1.3.6.1.4.1.327.1.1.7.2.10 | TableatZoneFilterTable | not-accessible | mandatory | Zone Filter table. |
| 1.3.6.1.4.1.327.1.1.7.2.10.1 | RowatZoneFilterEntry | not-accessible | mandatory | A list of information for a zone filter. |
| 1.3.6.1.4.1.327.1.1.7.2.10.1.1 | ColumnatZoneFilterIndex | read-only | mandatory | A sequentally assigned index value for each entry. |
| 1.3.6.1.4.1.327.1.1.7.2.10.1.2 | ColumnatZoneFilterName | read-write | mandatory | The zone filter name. |
| 1.3.6.1.4.1.327.1.1.7.2.10.1.3 | ColumnatZoneFilterType | read-write | mandatory | This value controls whether the zone filter name is valid or invalid. It will be set valid while adding and set invalid while deleting. |
| 1.3.6.1.4.1.327.16 | NodeuserLogInTrap | This trap is sent after the user logged in the AccessBuilder. | ||
| 1.3.6.1.4.1.327.17 | NodeuserLogOutTrap | This trap is sent after the user logged out the AccessBuilder. | ||
| 1.3.6.1.4.1.327.18 | NodeuserSessionTimeOutTrap | This trap is sent after the user logged out due to idle time expired. |