ChrComIfEthernetoverATMIfTable-MIB
17 objects
No module-level DESCRIPTION found.
Imported Objects
| Chromatis-MIB | chrComIfEthernet |
| ChrTyp-MIB MISSING | TruthValue |
| EthernetTypes-MIB MISSING | AlarmSeverityProfileIndexEnum DuplexModeEnum EthernetIfTypeEnum SpeedEnum |
| SNMPv2-SMI | Counter32 Integer32 OBJECT-TYPE Unsigned32 |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3695.1.2.5.3 | TablechrComIfEthernetoverATMIfTableTable | not-accessible | current | This table is an extension of the ifTable for the Ethernet/ATM interface type. Contains MAC-level configuration parameters and allows association of an interfa… |
| 1.3.6.1.4.1.3695.1.2.5.3.1 | RowchrComIfEthernetoverATMIfTableEntry | not-accessible | current | |
| 1.3.6.1.4.1.3695.1.2.5.3.1.1 | ColumnchrComIfEthernetIfIndex | read-only | current | Index referring to the interface table |
| 1.3.6.1.4.1.3695.1.2.5.3.1.2 | ColumnchrComIfEthernetELMIndex | read-only | current | ELM index within card (up to 2 ELMs per card; current card has only 1) |
| 1.3.6.1.4.1.3695.1.2.5.3.1.3 | ColumnchrComIfEthernetEthernetIfType | read-only | current | Type of port (FE/GE, Electrical/Optical, etc.) |
| 1.3.6.1.4.1.3695.1.2.5.3.1.4 | ColumnchrComIfEthernetPortEnable | read-write | current | Specifies if port is enabled or disabled. Ingress and egress traffic for this card is dropped if disabled |
| 1.3.6.1.4.1.3695.1.2.5.3.1.5 | ColumnchrComIfEthernetAutoNegSpeed | read-write | current | Defines if autonegotiation is allowed for Speed |
| 1.3.6.1.4.1.3695.1.2.5.3.1.6 | ColumnchrComIfEthernetAutoNegDuplexMode | read-write | current | Defines if autonegotiation is allowed for DuplexMode |
| 1.3.6.1.4.1.3695.1.2.5.3.1.7 | ColumnchrComIfEthernetAutoNegEnFlowControl | read-write | current | Defines if autonegotiation is allowed for En-Flow-Control |
| 1.3.6.1.4.1.3695.1.2.5.3.1.8 | ColumnchrComIfEthernetSpeed | read-write | current | Speed |
| 1.3.6.1.4.1.3695.1.2.5.3.1.9 | ColumnchrComIfEthernetDuplexMode | read-write | current | Duplex Mode (Half/Full) |
| 1.3.6.1.4.1.3695.1.2.5.3.1.10 | ColumnchrComIfEthernetEnFlowControl | read-write | current | Defines if 802.3x Flow Control is enabled |
| 1.3.6.1.4.1.3695.1.2.5.3.1.11 | ColumnchrComIfEthernetEnBackpressure | read-write | current | Defines if backpressure is enabled in half-duplex mode |
| 1.3.6.1.4.1.3695.1.2.5.3.1.12 | ColumnchrComIfEthernetLpgID | read-write | current | ID of Local Port Group (LPG) within the ELM that this port belongs to |
| 1.3.6.1.4.1.3695.1.2.5.3.1.13 | ColumnchrComIfEthernetLvmID | read-write | current | ID of Local VLAN Member (LVM) within the ELM that this port belongs to |
| 1.3.6.1.4.1.3695.1.2.5.3.1.14 | ColumnchrComIfEthernetAlarmVector | read-only | current | 16 bit field. The following are bits relative positions (0=LSB), and the trap ID associated to each alarm state. 0. Ethernet Loss of Signal (-LOS) (metropolisE… |
| 1.3.6.1.4.1.3695.1.2.5.3.1.15 | ColumnchrComIfEthernetAlarmSeverityProfileIndex | read-write | current |