Crossroads
119 objects
Crossroads private mib for 4100 and 4200 Fibre Channel to SCSI Router.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter enterprises |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2512 | Identitycrossroads | Crossroads private mib for 4100 and 4200 Fibre Channel to SCSI Router. | ||
| 1.3.6.1.4.1.2512.1 | Nodecrossroads4000series | |||
| 1.3.6.1.4.1.2512.1.1 | Nodecrossroads4100 | |||
| 1.3.6.1.4.1.2512.1.1.1 | ScalarfcConfigNodeName | read-write | mandatory | Worldwide name of a collection of N_Ports that comprise a Node. |
| 1.3.6.1.4.1.2512.1.1.2 | ScalarfcConfigNodeNumNPorts | read-only | mandatory | Number of N_Ports that comprise the named Node. |
| 1.3.6.1.4.1.2512.1.1.3 | NodefcConfig | |||
| 1.3.6.1.4.1.2512.1.1.3.1 | ScalarfcConfigEnableReset | read-write | mandatory | Toggle for software reset. True indicates that ressetting the product via SNMP is allowed. NOTE: each time the product is initialized this object is set to FAL… |
| 1.3.6.1.4.1.2512.1.1.3.2 | ScalarfcConfigUseHardAddress | read-write | mandatory | Toggle for address configuration. True indicates that configuration of the source ID is allowed. False indicates that the source ID may not be changed. |
| 1.3.6.1.4.1.2512.1.1.3.3 | ScalarfcConfigSourceID | read-write | mandatory | 3 byte Source address. For arbitrated loop, this will be the Hard Assigned AL_PA (preceeded by 2 0 bytes). ex. 0.0.EF |
| 1.3.6.1.4.1.2512.1.1.3.4 | ScalarfcConfigSCSIMode | read-write | mandatory | Fibre Channel to SCSI mapping mode. |
| 1.3.6.1.4.1.2512.1.1.3.5 | ScalarfcConfigTraceMask | read-write | mandatory | Trace Level. |
| 1.3.6.1.4.1.2512.1.1.3.6 | ScalarfcConfigReset | read-write | mandatory | Reset the product. Setting this object to TRUE will re-start all the software (similar to powering the product off, then on). The reset will only take place if… |
| 1.3.6.1.4.1.2512.1.1.3.7 | ScalarfcConfigCommit | read-write | mandatory | Commit the configuration values to the flash memory. |
| 1.3.6.1.4.1.2512.1.1.3.8 | ScalarfcConfigFirmwareRevLevel | read-only | mandatory | Firmware revision level. |
| 1.3.6.1.4.1.2512.1.1.4 | Nodemi | |||
| 1.3.6.1.4.1.2512.1.1.4.1 | ScalarmiSerialBaudRate | read-write | mandatory | The baud rate for the serial interface. |
| 1.3.6.1.4.1.2512.1.1.4.2 | ScalarmiMACAddress | read-write | mandatory | Physical address (MAC address). |
| 1.3.6.1.4.1.2512.1.1.4.3 | ScalarmiethernetIPAddr | read-write | mandatory | The IP address for this device. |
| 1.3.6.1.4.1.2512.1.1.4.4 | ScalarmiethernetIPNetmask | read-write | mandatory | Ethernet Net Mask. |
| 1.3.6.1.4.1.2512.1.1.4.5 | ScalarmiTrapIPAddr | read-write | mandatory | The IP address used for sending traps. Typically this is the IP address of the machine which has a network management program and/or MIB browser. |
| 1.3.6.1.4.1.2512.1.1.4.6 | ScalarmiTrapEnable | read-write | mandatory | Enable/Disable Traps. If TRUE, traps are sent to the specified Trap IP Address. If disabled, no traps will be sent to the SNMP manager. |
| 1.3.6.1.4.1.2512.1.1.4.7 | ScalarmiTrapPriority | read-write | mandatory | The Trap Priority. All SNMP Events (traps) of this priority (or higher) will be sent to the specified Trap IP Address. |
| 1.3.6.1.4.1.2512.1.1.5 | TablescsiConfigTable | not-accessible | mandatory | A Table containing SCSI Configuration parameters. |
| 1.3.6.1.4.1.2512.1.1.5.1 | RowscsiConfigEntry | not-accessible | mandatory | An entry in the SCSI Configuration Table. |
| 1.3.6.1.4.1.2512.1.1.5.1.1 | ColumnscsiConfigIndex | read-only | mandatory | Index into the SCSI Configuration Table. |
| 1.3.6.1.4.1.2512.1.1.5.1.2 | ColumnscsiConfigInitID | read-write | mandatory | Initiator SCSI ID. |
| 1.3.6.1.4.1.2512.1.1.5.1.3 | ColumnscsiConfigTargetIDAdd | read-write | mandatory | Get will return a mask of SCSI target ID's. A mask has a bit set for each target ID which is in use. Example: Get returns 133 = 0x0085 = 0000 0000 1000 0101 in… |
| 1.3.6.1.4.1.2512.1.1.5.1.4 | ColumnscsiConfigTargetIDRemove | read-write | mandatory | Get will return a mask of SCSI target ID's. A mask has a bit set for each target ID which is in use. Example: Get returns 133 = 0x0085 = 0000 0000 1000 0101 in… |
| 1.3.6.1.4.1.2512.1.1.6 | TablefctoSCSIMapTable | not-accessible | mandatory | A Table containing the Fibre Channel to SCSI Map. |
| 1.3.6.1.4.1.2512.1.1.6.1 | RowfctoSCSIMapEntry | not-accessible | mandatory | An entry in the Fibre Channel to SCSI Map Table. |
| 1.3.6.1.4.1.2512.1.1.6.1.1 | ColumnfctoSCSIMapIndex | read-only | mandatory | Index into the Fibre Channel to SCSI Map (FC LUN). |
| 1.3.6.1.4.1.2512.1.1.6.1.2 | ColumnfctoSCSIbus | read-write | mandatory | SCSI bus number. |
| 1.3.6.1.4.1.2512.1.1.6.1.3 | ColumnfctoSCSItarget | read-write | mandatory | SCSI ID. |
| 1.3.6.1.4.1.2512.1.1.6.1.4 | ColumnfctoSCSILUN | read-write | mandatory | SCSI LUN. |
| 1.3.6.1.4.1.2512.1.1.7 | TablescsitoFCMappingTable | not-accessible | mandatory | A Table containing information describing how SCSI channels are mapped to the Fibre Channel. |
| 1.3.6.1.4.1.2512.1.1.7.1 | RowscsitoFCMapEntry | not-accessible | mandatory | An entry in the SCSI to FC Mapping Table. |
| 1.3.6.1.4.1.2512.1.1.7.1.1 | ColumnscsitoFCMapIndexBus | read-only | mandatory | Index into the SCSItoFC Map. SCSI bus number. |
| 1.3.6.1.4.1.2512.1.1.7.1.2 | ColumnscsitoFCMapIndexSCSIID | read-only | mandatory | Index into the SCSItoFC Map. SCSI ID. |
| 1.3.6.1.4.1.2512.1.1.7.1.3 | ColumnscsitoFCMapIndexLUN | read-only | mandatory | Index into the SCSItoFC Map. SCSI LUN. |
| 1.3.6.1.4.1.2512.1.1.7.1.4 | ColumnscsitoFCMapDestID | read-write | mandatory | The Fibre Channel Node number for the destination. |
| 1.3.6.1.4.1.2512.1.1.7.1.5 | ColumnscsitoFCMapLUNlo | read-write | mandatory | SCSI LUN low bytes. |
| 1.3.6.1.4.1.2512.1.1.7.1.6 | ColumnscsitoFCMapLUNhi | read-write | mandatory | SCSI LUN high bytes. |
| 1.3.6.1.4.1.2512.1.1.8 | TablefcNPortPhysTable | not-accessible | mandatory | A Table containing N_Port physical characteristics and status. |
| 1.3.6.1.4.1.2512.1.1.8.1 | RowfcNPortPhysEntry | not-accessible | mandatory | An entry in the N_Port Physical Characteristics Table. |
| 1.3.6.1.4.1.2512.1.1.8.1.1 | ColumnfcNPortPhysNPortIndex | read-only | mandatory | A unique number that identifies an N_Port/NL_Port. This number ranges from 1 to the value of fcNodeNumNPorts and its value remains constant for the identified … |
| 1.3.6.1.4.1.2512.1.1.8.1.2 | ColumnfcNPortSpeed | read-only | mandatory | The transmission rate, an FC-0 physical characteristic. |
| 1.3.6.1.4.1.2512.1.1.8.1.3 | ColumnfcNPortMedia | read-only | mandatory | Type of media, an FC-0 physical characteristics. |
| 1.3.6.1.4.1.2512.1.1.8.1.4 | ColumnfcNPortTransmitterType | read-only | mandatory | Type of transmitter, an FC-0 physical characteristics. |
| 1.3.6.1.4.1.2512.1.1.8.1.5 | ColumnfcNPortDistance | read-only | mandatory | The maximum distance, an FC-0 physical characteristics. |
| 1.3.6.1.4.1.2512.1.1.8.1.6 | ColumnfcNPortLinkState | read-only | mandatory | The state of the FC link. Pending indicates that the initialization is still pending. Failed indicates that link initialization has failed. Successful indicate… |
| 1.3.6.1.4.1.2512.1.1.8.1.7 | ColumnfcNPortRTTOV | read-only | mandatory | Receiver_Transmitter timeout value, used by the receiver logic to detect Loss of Synchronization. |
| 1.3.6.1.4.1.2512.1.1.8.1.8 | ColumnfcNPortTopologyModel | read-only | mandatory | The topology model on the Link. The N_Port/NL_Port may be attached to a Fabric, or attached to another N_Port or to FC-AL (Arbitrated Loop). This value is only… |
| 1.3.6.1.4.1.2512.1.1.9 | TablescsiStatisticsTable | not-accessible | mandatory | A Table containing SCSI Statistics. |
| 1.3.6.1.4.1.2512.1.1.9.1 | RowscsiStatsEntry | not-accessible | mandatory | An entry in the SCSI Statistics Table. |
| 1.3.6.1.4.1.2512.1.1.9.1.1 | ColumnscsiStatsIndex | read-only | mandatory | Index into the SCSI Statistics Table. The SCSI bus number. |
| 1.3.6.1.4.1.2512.1.1.9.1.2 | ColumnscsiStatsIOs | read-only | mandatory | The number of IOs on the SCSI bus. |
| 1.3.6.1.4.1.2512.1.1.9.1.3 | ColumnscsiStatsDisconnects | read-only | mandatory | The number of Disconnects on the SCSI bus. |
| 1.3.6.1.4.1.2512.1.1.9.1.4 | ColumnscsiStatsAbortCount | read-only | mandatory | The of SCSI bus termination messages (i.e. ABORT, ABORT TAG, CLEAR QUEUE, BUS DEVICE RESET) which have terminated I/O processes. |
| 1.3.6.1.4.1.2512.1.1.9.1.5 | ColumnscsiStatsBusResets | read-only | mandatory | The count of SCSI bus resets. |
| 1.3.6.1.4.1.2512.1.1.10 | NodescsiCfg | |||
| 1.3.6.1.4.1.2512.1.1.10.1 | ScalarscsiCfgResetFlag | read-write | mandatory | Toggle SCSI Reset Operation. TRUE indicates that the SCSI bus will be reset on boot. |
| 1.3.6.1.4.1.2512.1.1.10.2 | ScalarscsiCfgDiscDelay | read-write | mandatory | Initial Discovery Delay. The amount of time (in msec) the system will wait before beginning the SCSI Discovery process. |
| 1.3.6.1.4.1.2512.1.1.11 | TablescsiProductDataTable | not-accessible | mandatory | A Table containing SCSI Product Data. |
| 1.3.6.1.4.1.2512.1.1.11.1 | RowscsiPDEntry | not-accessible | mandatory | An entry in the SCSI Product Data Table. |
| 1.3.6.1.4.1.2512.1.1.11.1.1 | ColumnscsiPDIndex | read-only | mandatory | Index into the SCSI Product Data Table. The SCSI LUN. |
| 1.3.6.1.4.1.2512.1.1.11.1.2 | ColumnscsiPDBus | read-only | mandatory | SCSI Bus number. Always 0 if your unit only has one SCSI Bus. |
| 1.3.6.1.4.1.2512.1.1.11.1.3 | ColumnscsiPDTarget | read-only | mandatory | SCSI Target ID. |
| 1.3.6.1.4.1.2512.1.1.11.1.4 | ColumnscsiPDLun | read-only | mandatory | SCSI Target Lun. |
| 1.3.6.1.4.1.2512.1.1.11.1.5 | ColumnscsiPDVendorID | read-only | mandatory | Vendor ID. |
| 1.3.6.1.4.1.2512.1.1.11.1.6 | ColumnscsiPDProductID | read-only | mandatory | Product ID. |
| 1.3.6.1.4.1.2512.1.1.11.1.7 | ColumnscsiPDRevLevel | read-only | mandatory | Revision Level. |
| 1.3.6.1.4.1.2512.1.1.11.1.8 | ColumnscsiPDDeviceCode | read-only | mandatory | Device type code. |
| 1.3.6.1.4.1.2512.1.1.11.1.9 | ColumnscsiPDQualifier | read-only | mandatory | Device type qualifier. |
| 1.3.6.1.4.1.2512.1.1.11.1.10 | ColumnscsiPDRemoveableMedia | read-only | mandatory | Removeable Media. |
| 1.3.6.1.4.1.2512.1.1.11.1.11 | ColumnscsiPDANSIVersion | read-only | mandatory | Device type version. |
| 1.3.6.1.4.1.2512.1.1.11.1.12 | ColumnscsiPDECMAVersion | read-only | mandatory | Device type version. |
| 1.3.6.1.4.1.2512.1.1.11.1.13 | ColumnscsiPDISOVersion | read-only | mandatory | Device type version. |
| 1.3.6.1.4.1.2512.1.1.11.1.14 | ColumnscsiPDRespFormat | read-only | mandatory | Response Format. |
| 1.3.6.1.4.1.2512.1.1.11.1.15 | ColumnscsiPDLength | read-only | mandatory | Additional data length. |
| 1.3.6.1.4.1.2512.1.1.11.1.16 | ColumnscsiPDSoftReset | read-only | mandatory | Support for Soft reset. |
| 1.3.6.1.4.1.2512.1.1.11.1.17 | ColumnscsiPDCommandQing | read-only | mandatory | Support for Command Queuing. |
| 1.3.6.1.4.1.2512.1.1.11.1.18 | ColumnscsiPDLinkedCommands | read-only | mandatory | Support for Linked Commands. |
| 1.3.6.1.4.1.2512.1.1.11.1.19 | ColumnscsiPDSyncTransfer | read-only | mandatory | Support for Sync transfer. |
| 1.3.6.1.4.1.2512.1.1.11.1.20 | ColumnscsiPD16Bit | read-only | mandatory | 16 bit wide SCSI support. |
| 1.3.6.1.4.1.2512.1.1.11.1.21 | ColumnscsiPD32Bit | read-only | mandatory | 32 bit wide SCSI support. |
| 1.3.6.1.4.1.2512.1.1.11.1.22 | ColumnscsiPDRelativeAddr | read-only | mandatory | Support for Relative address. |
| 1.3.6.1.4.1.2512.1.1.12 | TablefcNPortStatisticsTable | not-accessible | mandatory | A table of NPort statistics. |
| 1.3.6.1.4.1.2512.1.1.12.1 | RowfcNPSEntry | not-accessible | mandatory | An entry in the NPort statistics table. |
| 1.3.6.1.4.1.2512.1.1.12.1.1 | ColumnfcNPSIndex | read-only | mandatory | A unique number that identifies an N_Port. This number ranges from 1 to the value of fcNodeNumNPorts and its value remains constant for the identified N_Port u… |
| 1.3.6.1.4.1.2512.1.1.12.1.2 | ColumnfcNPSInDeviceDataSeqs | read-only | mandatory | The number of Device Data sequences received by this N_Port/NL_Port. |
| 1.3.6.1.4.1.2512.1.1.12.1.3 | ColumnfcNPSOutDeviceDataSeqs | read-only | mandatory | The number of Device Data sequences transmitted by this N_Port/NL_Port. |
| 1.3.6.1.4.1.2512.1.1.12.1.4 | ColumnfcNPSInLinkDataSeqs | read-only | mandatory | The number of Link Data sequences received by this N_Port/NL_Port. |
| 1.3.6.1.4.1.2512.1.1.12.1.5 | ColumnfcNPSOutLinkDataSeqs | read-only | mandatory | The number of Link Data sequences transmitted by this N_Port/NL_Port. |
| 1.3.6.1.4.1.2512.1.1.12.1.6 | ColumnfcNPSInPBSYFrames | read-only | mandatory | The number of P_BSY frames received by this N_Port/NL_Port. |
| 1.3.6.1.4.1.2512.1.1.12.1.7 | ColumnfcNPSOutPBSYFrames | read-only | mandatory | The number of P_BSY frames transmitted by this N_Port/NL_Port. |
| 1.3.6.1.4.1.2512.1.1.12.1.8 | ColumnfcNPSInFBSYFrames | read-only | mandatory | The number of F_BSY frames received by this N_Port/NL_Port. |
| 1.3.6.1.4.1.2512.1.1.12.1.9 | ColumnfcNPSInPRJTFrames | read-only | mandatory | The number of P_RJT frames received by this N_Port/NL_Port. |
| 1.3.6.1.4.1.2512.1.1.12.1.10 | ColumnfcNPSOutPRJTFrames | read-only | mandatory | The number of P_RJT frames transmitted by this N_Port. |
| 1.3.6.1.4.1.2512.1.1.12.1.11 | ColumnfcNPSLinkDown | read-only | mandatory | Number of Link down conditions detected. |
| 1.3.6.1.4.1.2512.1.1.12.1.12 | ColumnfcNPSInAborts | read-only | mandatory | Number of ABTS frames received. |
| 1.3.6.1.4.1.2512.1.1.12.1.13 | ColumnfcNPSOutAborts | read-only | mandatory | Number of ABTS frames sent. |
| 1.3.6.1.4.1.2512.1.1.12.1.14 | ColumnfcNPSLaserFaults | read-only | mandatory | Number of laser faults. |
| 1.3.6.1.4.1.2512.1.1.12.1.15 | ColumnfcNPSLOS | read-only | mandatory | Number of times Loss of Signal was detected. |
| 1.3.6.1.4.1.2512.1.1.12.1.16 | ColumnfcNPSSync | read-only | mandatory | Number of times Loss of Sync. was detected. |
| 1.3.6.1.4.1.2512.1.1.12.1.17 | ColumnfcNPSBadRXChars | read-only | mandatory | Number of bad characters received. |
| 1.3.6.1.4.1.2512.1.1.12.1.18 | ColumnfcNPSLinkFail | read-only | mandatory | Number of Link Failure conditions. |
| 1.3.6.1.4.1.2512.1.1.12.1.19 | ColumnfcNPSBadCRC | read-only | mandatory | Number of frames received with a bad CRC. |
| 1.3.6.1.4.1.2512.1.1.12.1.20 | ColumnfcNPSProtoErrors | read-only | mandatory | Number of protocol errors detected. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AddressIdentifier | OCTET STRING (SIZE (3)) | ||
| Boolean | INTEGER { true (1), false (2) } | ||
| FC0Distance | INTEGER { long-distance (1), intermediate-distance (2), short-distance (3) } | ||
| FC0Media | INTEGER { single-mode (1), multimode-50um (2), multimode-625um (3), video-cable (4), miniature-cable (5), twisted-pair (6) } | ||
| FC0Speed | INTEGER { oneHundredMegaByte (1), twoHundredMegaByte (2), fourHundredMegaByte (4) } | ||
| FC0TransmitterType | INTEGER { long-wave-laser (1), short-wave-laser (2), long-wave-LED (3), electrical (4) } | ||
| MilliSeconds | INTEGER | ||
| ReceiverState | INTEGER { synchronization-acquired (1), synchronization-lost (2), reset (3) } | ||
| TopologyModel | INTEGER { unknown (1), fabric (2), point-to-point (3), arbitrated-loop (4) } | ||
| TransmitterState | INTEGER { fibre-opened (1), not-enabled (2), enabling (3), working (4), looped (5), failed (6) } | ||
| WorldwideName | OCTET STRING (SIZE (9)) |