Cxr-connect-MIB
261 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises Gauge IpAddress mgmt NetworkAddress OBJECT-TYPE TimeTicks |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1 | Nodemib-2 | |||
| 1.3.6.1.2.1.1 | Nodesystem | |||
| 1.3.6.1.2.1.1.1 | ScalarsysDescr | read-only | mandatory | A textual description of the entity. This value should include the full name and version identification of the system's hardware type, software operating-syste… |
| 1.3.6.1.2.1.1.2 | ScalarsysObjectID | read-only | mandatory | The vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtr… |
| 1.3.6.1.2.1.1.3 | ScalarsysUpTime | read-only | mandatory | The time (in hundredths of a second) since the network management portion of the system was last re-initialized. |
| 1.3.6.1.2.1.1.4 | ScalarsysContact | read-only | mandatory | The textual identification of the contact person for this managed node, together with information on how to contact this person (see $SYSADM). |
| 1.3.6.1.2.1.1.5 | ScalarsysName | read-only | mandatory | An administratively-assigned name for this managed node. By convention, this is the node's fully-qualified domain name (see $MYNAME). |
| 1.3.6.1.2.1.1.6 | ScalarsysLocation | read-only | mandatory | The physical location of this node (e.g., `telephone closet, 3rd floor') (see $SYSLOC). |
| 1.3.6.1.2.1.1.7 | ScalarsysServices | read-only | mandatory | A value which indicates the set of services that this entity primarily offers. The value is a sum. This sum initially takes the value zero, Then, for each laye… |
| 1.3.6.1.2.1.2 | Nodeinterfaces | |||
| 1.3.6.1.2.1.2.1 | ScalarifNumber | read-only | mandatory | The number of network interfaces (regardless of their current state) present on this system. |
| 1.3.6.1.2.1.2.2 | TableifTable | read-only | mandatory | A list of interface entries. The number of entries is given by the value of ifNumber. |
| 1.3.6.1.2.1.2.2.1 | RowifEntry | read-only | mandatory | An interface entry containing objects at the subnetwork layer and below for a particular interface. |
| 1.3.6.1.2.1.2.2.1.1 | ColumnifIndex | read-only | mandatory | A unique value for each interface. Its value ranges between 1 and the value of ifNumber. The value for each interface must remain constant at least from one re… |
| 1.3.6.1.2.1.2.2.1.2 | ColumnifDescr | read-only | mandatory | A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the h… |
| 1.3.6.1.2.1.2.2.1.3 | ColumnifType | read-only | mandatory | The type of interface, distinguished according to the physical/link protocol(s) immediately `below' the network layer in the protocol stack. |
| 1.3.6.1.2.1.2.2.1.4 | ColumnifMtu | read-only | mandatory | The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagr… |
| 1.3.6.1.2.1.2.2.1.5 | ColumnifSpeed | read-only | mandatory | An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation ca… |
| 1.3.6.1.2.1.2.2.1.6 | ColumnifPhysAddress | read-only | mandatory | The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.… |
| 1.3.6.1.2.1.2.2.1.7 | ColumnifAdminStatus | read-write | mandatory | The desired state of the interface. The testing(3) state indicates that no operational packets can be passed. |
| 1.3.6.1.2.1.2.2.1.8 | ColumnifOperStatus | read-only | mandatory | The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. |
| 1.3.6.1.2.1.2.2.1.9 | ColumnifLastChange | read-only | mandatory | The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re- initialization o… |
| 1.3.6.1.2.1.2.2.1.10 | ColumnifInOctets | read-only | mandatory | The total number of octets received on the interface, including framing characters. |
| 1.3.6.1.2.1.2.2.1.11 | ColumnifInUcastPkts | read-only | mandatory | The number of subnetwork-unicast packets delivered to a higher-layer protocol. |
| 1.3.6.1.2.1.2.2.1.12 | ColumnifInNUcastPkts | read-only | mandatory | The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol. |
| 1.3.6.1.2.1.2.2.1.13 | ColumnifInDiscards | read-only | mandatory | The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer pr… |
| 1.3.6.1.2.1.2.2.1.14 | ColumnifInErrors | read-only | mandatory | The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. |
| 1.3.6.1.2.1.2.2.1.15 | ColumnifInUnknownProtos | read-only | mandatory | The number of packets received via the interface which were discarded because of an unknown or unsupported protocol. |
| 1.3.6.1.2.1.2.2.1.16 | ColumnifOutOctets | read-only | mandatory | The total number of octets transmitted out of the interface, including framing characters. |
| 1.3.6.1.2.1.2.2.1.17 | ColumnifOutUcastPkts | read-only | mandatory | The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not se… |
| 1.3.6.1.2.1.2.2.1.18 | ColumnifOutNUcastPkts | read-only | mandatory | The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) addre… |
| 1.3.6.1.2.1.2.2.1.19 | ColumnifOutDiscards | read-only | mandatory | The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reaso… |
| 1.3.6.1.2.1.2.2.1.20 | ColumnifOutErrors | read-only | mandatory | The number of outbound packets that could not be transmitted because of errors. |
| 1.3.6.1.2.1.2.2.1.21 | ColumnifOutQLen | read-only | mandatory | The length of the output packet queue (in packets). |
| 1.3.6.1.2.1.2.2.1.22 | ColumnifSpecific | read-only | mandatory | A reference to MIB definitions specific to the particular media being used to realize the interface. For example, if the interface is realized by an ethernet, … |
| 1.3.6.1.2.1.3 | Nodeat | |||
| 1.3.6.1.2.1.3.1 | TableatTable | read-only | deprecated | The Address Translation tables contain the NetworkAddress to `physical' address equivalences. Some interfaces do not use translation tables for determining add… |
| 1.3.6.1.2.1.3.1.1 | RowatEntry | read-only | deprecated | Each entry contains one NetworkAddress to `physical' address equivalence. |
| 1.3.6.1.2.1.3.1.1.1 | ColumnatIfIndex | read-only | deprecated | The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified … |
| 1.3.6.1.2.1.3.1.1.2 | ColumnatPhysAddress | read-only | deprecated | The media-dependent `physical' address. Setting this object to a null string (one of zero length) has the effect of invaliding the corresponding entry in the a… |
| 1.3.6.1.2.1.3.1.1.3 | ColumnatNetAddress | read-only | deprecated | The NetworkAddress (e.g., the IP address) corresponding to the media-dependent `physical' address. |
| 1.3.6.1.2.1.4 | Nodeip | |||
| 1.3.6.1.2.1.4.1 | ScalaripForwarding | read-only | mandatory | The indication of whether this entity is acting as an IP gateway in respect to the forwarding of datagrams received by, but not addressed to, this entity. IP g… |
| 1.3.6.1.2.1.4.2 | ScalaripDefaultTTL | read-only | mandatory | The default value inserted into the Time-To-Live field of the IP header of datagrams originated at this entity, whenever a TTL value is not supplied by the tra… |
| 1.3.6.1.2.1.4.3 | ScalaripInReceives | read-only | mandatory | The total number of input datagrams received from interfaces, including those received in error. |
| 1.3.6.1.2.1.4.4 | ScalaripInHdrErrors | read-only | mandatory | The number of input datagrams discarded due to errors in their IP headers, including bad checksums, version number mismatch, other format errors, time-to-live … |
| 1.3.6.1.2.1.4.5 | ScalaripInAddrErrors | read-only | mandatory | The number of input datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity. Th… |
| 1.3.6.1.2.1.4.6 | ScalaripForwDatagrams | read-only | mandatory | The number of input datagrams for which this entity was not their final IP destination, as a result of which an attempt was made to find a route to forward the… |
| 1.3.6.1.2.1.4.7 | ScalaripInUnknownProtos | read-only | mandatory | The number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol. |
| 1.3.6.1.2.1.4.8 | ScalaripInDiscards | read-only | mandatory | The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (e.g., for lack of buff… |
| 1.3.6.1.2.1.4.9 | ScalaripInDelivers | read-only | mandatory | The total number of input datagrams successfully delivered to IP user-protocols (including ICMP). |
| 1.3.6.1.2.1.4.10 | ScalaripOutRequests | read-only | mandatory | The total number of IP datagrams which local IP user-protocols (including ICMP) supplied to IP in requests for transmission. Note that this counter does not in… |
| 1.3.6.1.2.1.4.11 | ScalaripOutDiscards | read-only | mandatory | The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but which were discarded (e.g., for … |
| 1.3.6.1.2.1.4.12 | ScalaripOutNoRoutes | read-only | mandatory | The number of IP datagrams discarded because no route could be found to transmit them to their destination. Note that this counter includes any packets counted… |
| 1.3.6.1.2.1.4.13 | ScalaripReasmTimeout | read-only | mandatory | The maximum number of seconds which received fragments are held while they are awaiting reassembly at this entity. |
| 1.3.6.1.2.1.4.14 | ScalaripReasmReqds | read-only | mandatory | The number of IP fragments received which needed to be reassembled at this entity. |
| 1.3.6.1.2.1.4.15 | ScalaripReasmOKs | read-only | mandatory | The number of IP datagrams successfully re- assembled. |
| 1.3.6.1.2.1.4.16 | ScalaripReasmFails | read-only | mandatory | The number of failures detected by the IP re- assembly algorithm (for whatever reason: timed out, errors, etc). Note that this is not necessarily a count of di… |
| 1.3.6.1.2.1.4.17 | ScalaripFragOKs | read-only | mandatory | The number of IP datagrams that have been successfully fragmented at this entity. |
| 1.3.6.1.2.1.4.18 | ScalaripFragFails | read-only | mandatory | The number of IP datagrams that have been discarded because they needed to be fragmented at this entity but could not be, e.g., because their Don't Fragment fl… |
| 1.3.6.1.2.1.4.19 | ScalaripFragCreates | read-only | mandatory | The number of IP datagram fragments that have been generated as a result of fragmentation at this entity. |
| 1.3.6.1.2.1.4.20 | TableipAddrTable | read-only | mandatory | The table of addressing information relevant to this entity's IP addresses. |
| 1.3.6.1.2.1.4.20.1 | RowipAddrEntry | read-only | mandatory | The addressing information for one of this entity's IP addresses. |
| 1.3.6.1.2.1.4.20.1.1 | ColumnipAdEntAddr | read-only | mandatory | The IP address to which this entry's addressing information pertains. |
| 1.3.6.1.2.1.4.20.1.2 | ColumnipAdEntIfIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the … |
| 1.3.6.1.2.1.4.20.1.3 | ColumnipAdEntNetMask | read-only | mandatory | The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits … |
| 1.3.6.1.2.1.4.20.1.4 | ColumnipAdEntBcastAddr | read-only | mandatory | The value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this… |
| 1.3.6.1.2.1.4.20.1.5 | ColumnipAdEntReasmMaxSize | read-only | mandatory | The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received on this interface. |
| 1.3.6.1.2.1.4.21 | TableipRouteTable | read-only | mandatory | This entity's IP Routing table. |
| 1.3.6.1.2.1.4.21.1 | RowipRouteEntry | read-only | mandatory | A route to a particular destination. |
| 1.3.6.1.2.1.4.21.1.1 | ColumnipRouteDest | read-only | mandatory | The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in… |
| 1.3.6.1.2.1.4.21.1.2 | ColumnipRouteIfIndex | read-only | mandatory | The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particu… |
| 1.3.6.1.2.1.4.21.1.3 | ColumnipRouteMetric1 | read-only | mandatory | The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If … |
| 1.3.6.1.2.1.4.21.1.4 | ColumnipRouteMetric2 | read-only | mandatory | An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If… |
| 1.3.6.1.2.1.4.21.1.5 | ColumnipRouteMetric3 | read-only | mandatory | An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If… |
| 1.3.6.1.2.1.4.21.1.6 | ColumnipRouteMetric4 | read-only | mandatory | An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If… |
| 1.3.6.1.2.1.4.21.1.7 | ColumnipRouteNextHop | read-only | mandatory | The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is… |
| 1.3.6.1.2.1.4.21.1.8 | ColumnipRouteType | read-only | mandatory | The type of route. Note that the values direct(3) and indirect(4) refer to the notion of direct and indirect routing in the IP architecture. Setting this objec… |
| 1.3.6.1.2.1.4.21.1.9 | ColumnipRouteProto | read-only | mandatory | The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support th… |
| 1.3.6.1.2.1.4.21.1.10 | ColumnipRouteAge | read-only | mandatory | The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except throug… |
| 1.3.6.1.2.1.4.21.1.11 | ColumnipRouteMask | read-only | mandatory | Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the ipRouteDest field. For those systems that do not s… |
| 1.3.6.1.2.1.4.21.1.12 | ColumnipRouteMetric5 | read-only | mandatory | An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If… |
| 1.3.6.1.2.1.4.22 | TableipNetToMediaTable | read-only | mandatory | The IP Address Translation table used for mapping from IP addresses to physical addresses. |
| 1.3.6.1.2.1.4.22.1 | RowipNetToMediaEntry | read-only | mandatory | Each entry contains one IpAddress to `physical' address equivalence. |
| 1.3.6.1.2.1.4.22.1.1 | ColumnipNetToMediaIfIndex | read-only | mandatory | The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified … |
| 1.3.6.1.2.1.4.22.1.2 | ColumnipNetToMediaPhysAddress | read-only | mandatory | The media-dependent `physical' address. |
| 1.3.6.1.2.1.4.22.1.3 | ColumnipNetToMediaNetAddress | read-only | mandatory | The IpAddress corresponding to the media- dependent `physical' address. |
| 1.3.6.1.2.1.4.22.1.4 | ColumnipNetToMediaType | read-only | mandatory | The type of mapping. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ipNetToMediaTable. That is, it e… |
| 1.3.6.1.2.1.5 | Nodeicmp | |||
| 1.3.6.1.2.1.5.1 | ScalaricmpInMsgs | read-only | mandatory | The total number of ICMP messages which the entity received. Note that this counter includes all those counted by icmpInErrors. |
| 1.3.6.1.2.1.5.2 | ScalaricmpInErrors | read-only | mandatory | The number of ICMP messages which the entity received but determined as having ICMP-specific errors (bad ICMP checksums, bad length, etc.). |
| 1.3.6.1.2.1.5.3 | ScalaricmpInDestUnreachs | read-only | mandatory | The number of ICMP Destination Unreachable messages received. |
| 1.3.6.1.2.1.5.4 | ScalaricmpInTimeExcds | read-only | mandatory | The number of ICMP Time Exceeded messages received. |
| 1.3.6.1.2.1.5.5 | ScalaricmpInParmProbs | read-only | mandatory | The number of ICMP Parameter Problem messages received. |
| 1.3.6.1.2.1.5.6 | ScalaricmpInSrcQuenchs | read-only | mandatory | The number of ICMP Source Quench messages received. |
| 1.3.6.1.2.1.5.7 | ScalaricmpInRedirects | read-only | mandatory | The number of ICMP Redirect messages received. |
| 1.3.6.1.2.1.5.8 | ScalaricmpInEchos | read-only | mandatory | The number of ICMP Echo (request) messages received. |
| 1.3.6.1.2.1.5.9 | ScalaricmpInEchoReps | read-only | mandatory | The number of ICMP Echo Reply messages received. |
| 1.3.6.1.2.1.5.10 | ScalaricmpInTimestamps | read-only | mandatory | The number of ICMP Timestamp (request) messages received. |
| 1.3.6.1.2.1.5.11 | ScalaricmpInTimestampReps | read-only | mandatory | The number of ICMP Timestamp Reply messages received. |
| 1.3.6.1.2.1.5.12 | ScalaricmpInAddrMasks | read-only | mandatory | The number of ICMP Address Mask Request messages received. |
| 1.3.6.1.2.1.5.13 | ScalaricmpInAddrMaskReps | read-only | mandatory | The number of ICMP Address Mask Reply messages received. |
| 1.3.6.1.2.1.5.14 | ScalaricmpOutMsgs | read-only | mandatory | The total number of ICMP messages which this entity attempted to send. Note that this counter includes all those counted by icmpOutErrors. |
| 1.3.6.1.2.1.5.15 | ScalaricmpOutErrors | read-only | mandatory | The number of ICMP messages which this entity did not send due to problems discovered within ICMP such as a lack of buffers. This value should not include erro… |
| 1.3.6.1.2.1.5.16 | ScalaricmpOutDestUnreachs | read-only | mandatory | The number of ICMP Destination Unreachable messages sent. |
| 1.3.6.1.2.1.5.17 | ScalaricmpOutTimeExcds | read-only | mandatory | The number of ICMP Time Exceeded messages sent. |
| 1.3.6.1.2.1.5.18 | ScalaricmpOutParmProbs | read-only | mandatory | The number of ICMP Parameter Problem messages sent. |
| 1.3.6.1.2.1.5.19 | ScalaricmpOutSrcQuenchs | read-only | mandatory | The number of ICMP Source Quench messages sent. |
| 1.3.6.1.2.1.5.20 | ScalaricmpOutRedirects | read-only | mandatory | The number of ICMP Redirect messages sent. For a host, this object will always be zero, since hosts do not send redirects. |
| 1.3.6.1.2.1.5.21 | ScalaricmpOutEchos | read-only | mandatory | The number of ICMP Echo (request) messages sent. |
| 1.3.6.1.2.1.5.22 | ScalaricmpOutEchoReps | read-only | mandatory | The number of ICMP Echo Reply messages sent. |
| 1.3.6.1.2.1.5.23 | ScalaricmpOutTimestamps | read-only | mandatory | The number of ICMP Timestamp (request) messages sent. |
| 1.3.6.1.2.1.5.24 | ScalaricmpOutTimestampReps | read-only | mandatory | The number of ICMP Timestamp Reply messages sent. |
| 1.3.6.1.2.1.5.25 | ScalaricmpOutAddrMasks | read-only | mandatory | The number of ICMP Address Mask Request messages sent. |
| 1.3.6.1.2.1.5.26 | ScalaricmpOutAddrMaskReps | read-only | mandatory | The number of ICMP Address Mask Reply messages sent. |
| 1.3.6.1.2.1.6 | Nodetcp | |||
| 1.3.6.1.2.1.6.1 | ScalartcpRtoAlgorithm | read-only | mandatory | The algorithm used to determine the timeout value used for retransmitting unacknowledged octets. |
| 1.3.6.1.2.1.6.2 | ScalartcpRtoMin | read-only | mandatory | The minimum value permitted by a TCP implementation for the retransmission timeout, measured in milliseconds. More refined semantics for objects of this type d… |
| 1.3.6.1.2.1.6.3 | ScalartcpRtoMax | read-only | mandatory | The maximum value permitted by a TCP implementation for the retransmission timeout, measured in milliseconds. More refined semantics for objects of this type d… |
| 1.3.6.1.2.1.6.4 | ScalartcpMaxConn | read-only | mandatory | The limit on the total number of TCP connections the entity can support. In entities where the maximum number of connections is dynamic, this object should con… |
| 1.3.6.1.2.1.6.5 | ScalartcpActiveOpens | read-only | mandatory | The number of times TCP connections have made a direct transition to the SYN-SENT state from the CLOSED state. |
| 1.3.6.1.2.1.6.6 | ScalartcpPassiveOpens | read-only | mandatory | The number of times TCP connections have made a direct transition to the SYN-RCVD state from the LISTEN state. |
| 1.3.6.1.2.1.6.7 | ScalartcpAttemptFails | read-only | mandatory | The number of times TCP connections have made a direct transition to the CLOSED state from either the SYN-SENT state or the SYN-RCVD state, plus the number of … |
| 1.3.6.1.2.1.6.8 | ScalartcpEstabResets | read-only | mandatory | The number of times TCP connections have made a direct transition to the CLOSED state from either the ESTABLISHED state or the CLOSE-WAIT state. |
| 1.3.6.1.2.1.6.9 | ScalartcpCurrEstab | read-only | mandatory | The number of TCP connections for which the current state is either ESTABLISHED or CLOSE- WAIT. |
| 1.3.6.1.2.1.6.10 | ScalartcpInSegs | read-only | mandatory | The total number of segments received, including those received in error. This count includes segments received on currently established connections. |
| 1.3.6.1.2.1.6.11 | ScalartcpOutSegs | read-only | mandatory | The total number of segments sent, including those on current connections but excluding those containing only retransmitted octets. |
| 1.3.6.1.2.1.6.12 | ScalartcpRetransSegs | read-only | mandatory | The total number of segments retransmitted - that is, the number of TCP segments transmitted containing one or more previously transmitted octets. |
| 1.3.6.1.2.1.6.13 | TabletcpConnTable | read-only | mandatory | A table containing TCP connection-specific information. |
| 1.3.6.1.2.1.6.13.1 | RowtcpConnEntry | read-only | mandatory | Information about a particular current TCP connection. An object of this type is transient, in that it ceases to exist when (or soon after) the connection make… |
| 1.3.6.1.2.1.6.13.1.1 | ColumntcpConnState | read-only | mandatory | The state of this TCP connection. The only value which may be set by a management station is deleteTCB(12). Accordingly, it is appropriate for an agent to retu… |
| 1.3.6.1.2.1.6.13.1.2 | ColumntcpConnLocalAddress | read-only | mandatory | The local IP address for this TCP connection. In the case of a connection in the listen state which is willing to accept connections for any IP interface assoc… |
| 1.3.6.1.2.1.6.13.1.3 | ColumntcpConnLocalPort | read-only | mandatory | The local port number for this TCP connection. |
| 1.3.6.1.2.1.6.13.1.4 | ColumntcpConnRemAddress | read-only | mandatory | The remote IP address for this TCP connection. |
| 1.3.6.1.2.1.6.13.1.5 | ColumntcpConnRemPort | read-only | mandatory | The remote port number for this TCP connection. |
| 1.3.6.1.2.1.6.14 | ScalartcpInErrs | read-only | mandatory | The total number of segments received in error (e.g., bad TCP checksums). |
| 1.3.6.1.2.1.6.15 | ScalartcpOutRsts | read-only | mandatory | The number of TCP segments sent containing the RST flag. |
| 1.3.6.1.2.1.7 | Nodeudp | |||
| 1.3.6.1.2.1.7.1 | ScalarudpInDatagrams | read-only | mandatory | The total number of UDP datagrams delivered to UDP users. |
| 1.3.6.1.2.1.7.2 | ScalarudpNoPorts | read-only | mandatory | The total number of received UDP datagrams for which there was no application at the destination port. |
| 1.3.6.1.2.1.7.3 | ScalarudpInErrors | read-only | mandatory | The number of received UDP datagrams that could not be delivered for reasons other than the lack of an application at the destination port. |
| 1.3.6.1.2.1.7.4 | ScalarudpOutDatagrams | read-only | mandatory | The total number of UDP datagrams sent from this entity. |
| 1.3.6.1.2.1.7.5 | TableudpTable | read-only | mandatory | A table containing UDP listener information. |
| 1.3.6.1.2.1.7.5.1 | RowudpEntry | read-only | mandatory | Information about a particular current UDP listener. |
| 1.3.6.1.2.1.7.5.1.1 | ColumnudpLocalAddress | read-only | mandatory | The local IP address for this UDP listener. In the case of a UDP listener which is willing to accept datagrams for any IP interface associated with the node, t… |
| 1.3.6.1.2.1.7.5.1.2 | ColumnudpLocalPort | read-only | mandatory | The local port number for this UDP listener. |
| 1.3.6.1.2.1.11 | Nodesnmp | |||
| 1.3.6.1.2.1.11.1 | ScalarsnmpInPkts | read-only | mandatory | The total number of Messages delivered to the SNMP entity from the transport service. |
| 1.3.6.1.2.1.11.2 | ScalarsnmpOutPkts | read-only | mandatory | The total number of SNMP Messages which were passed from the SNMP protocol entity to the transport service. |
| 1.3.6.1.2.1.11.3 | ScalarsnmpInBadVersions | read-only | mandatory | The total number of SNMP Messages which were delivered to the SNMP protocol entity and were for an unsupported SNMP version. |
| 1.3.6.1.2.1.11.4 | ScalarsnmpInBadCommunityNames | read-only | mandatory | The total number of SNMP Messages delivered to the SNMP protocol entity which used a SNMP community name not known to said entity. |
| 1.3.6.1.2.1.11.5 | ScalarsnmpInBadCommunityUses | read-only | mandatory | The total number of SNMP Messages delivered to the SNMP protocol entity which represented an SNMP operation which was not allowed by the SNMP community named i… |
| 1.3.6.1.2.1.11.6 | ScalarsnmpInASNParseErrs | read-only | mandatory | The total number of ASN.1 or BER errors encountered by the SNMP protocol entity when decoding received SNMP Messages. |
| 1.3.6.1.2.1.11.7 | ScalarsnmpInBadTypes | read-only | mandatory | |
| 1.3.6.1.2.1.11.8 | ScalarsnmpInTooBigs | read-only | mandatory | The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `tooBig'. |
| 1.3.6.1.2.1.11.9 | ScalarsnmpInNoSuchNames | read-only | mandatory | The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `noSuchName'. |
| 1.3.6.1.2.1.11.10 | ScalarsnmpInBadValues | read-only | mandatory | The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `badValue'. |
| 1.3.6.1.2.1.11.11 | ScalarsnmpInReadOnlys | read-only | mandatory | The total number valid SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `readOnly'. It should be… |
| 1.3.6.1.2.1.11.12 | ScalarsnmpInGenErrs | read-only | mandatory | The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `genErr'. |
| 1.3.6.1.2.1.11.13 | ScalarsnmpInTotalReqVars | read-only | mandatory | The total number of MIB objects which have been retrieved successfully by the SNMP protocol entity as the result of receiving valid SNMP Get-Request and Get-Ne… |
| 1.3.6.1.2.1.11.14 | ScalarsnmpInTotalSetVars | read-only | mandatory | The total number of MIB objects which have been altered successfully by the SNMP protocol entity as the result of receiving valid SNMP Set-Request PDUs. |
| 1.3.6.1.2.1.11.15 | ScalarsnmpInGetRequests | read-only | mandatory | The total number of SNMP Get-Request PDUs which have been accepted and processed by the SNMP protocol entity. |
| 1.3.6.1.2.1.11.16 | ScalarsnmpInGetNexts | read-only | mandatory | The total number of SNMP Get-Next PDUs which have been accepted and processed by the SNMP protocol entity. |
| 1.3.6.1.2.1.11.17 | ScalarsnmpInSetRequests | read-only | mandatory | The total number of SNMP Set-Request PDUs which have been accepted and processed by the SNMP protocol entity. |
| 1.3.6.1.2.1.11.18 | ScalarsnmpInGetResponses | read-only | mandatory | The total number of SNMP Get-Response PDUs which have been accepted and processed by the SNMP protocol entity. |
| 1.3.6.1.2.1.11.19 | ScalarsnmpInTraps | read-only | mandatory | The total number of SNMP Trap PDUs which have been accepted and processed by the SNMP protocol entity. |
| 1.3.6.1.2.1.11.20 | ScalarsnmpOutTooBigs | read-only | mandatory | The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `tooBig.' |
| 1.3.6.1.2.1.11.21 | ScalarsnmpOutNoSuchNames | read-only | mandatory | The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status is `noSuchName'. |
| 1.3.6.1.2.1.11.22 | ScalarsnmpOutBadValues | read-only | mandatory | The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `badValue'. |
| 1.3.6.1.2.1.11.23 | ScalarsnmpOutReadOnlys | read-only | mandatory | |
| 1.3.6.1.2.1.11.24 | ScalarsnmpOutGenErrs | read-only | mandatory | The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `genErr'. |
| 1.3.6.1.2.1.11.25 | ScalarsnmpOutGetRequests | read-only | mandatory | The total number of SNMP Get-Request PDUs which have been generated by the SNMP protocol entity. |
| 1.3.6.1.2.1.11.26 | ScalarsnmpOutGetNexts | read-only | mandatory | The total number of SNMP Get-Next PDUs which have been generated by the SNMP protocol entity. |
| 1.3.6.1.2.1.11.27 | ScalarsnmpOutSetRequests | read-only | mandatory | The total number of SNMP Set-Request PDUs which have been generated by the SNMP protocol entity. |
| 1.3.6.1.2.1.11.28 | ScalarsnmpOutGetResponses | read-only | mandatory | The total number of SNMP Get-Response PDUs which have been generated by the SNMP protocol entity. |
| 1.3.6.1.2.1.11.29 | ScalarsnmpOutTraps | read-only | mandatory | The total number of SNMP Trap PDUs which have been generated by the SNMP protocol entity. |
| 1.3.6.1.2.1.11.30 | ScalarsnmpEnableAuthenTraps | read-only | mandatory | Indicates whether the SNMP agent process is permitted to generate authentication-failure traps. The value of this object overrides any configuration informatio… |
| 1.3.6.1.4.1.3810 | Nodecxr-connect | |||
| 1.3.6.1.4.1.3810.0 | NodecoldStart | A coldStart trap signifies that the sending protocol entity is reinitializing itself such that the agent's configuration or the rotocol entity implementation m… | ||
| 1.3.6.1.4.1.3810.1 | Nodecxr-connect-sys | |||
| 1.3.6.1.4.1.3810.1.1 | Nodecpuload | |||
| 1.3.6.1.4.1.3810.1.1.1 | Scalarcpu1 | read-only | mandatory | An estimate of the CPU current load based on the idle/busy state of processor. The measurement is done with a pre-calibrated loop, that means it's possible to … |
| 1.3.6.1.4.1.3810.1.2 | Nodemem | |||
| 1.3.6.1.4.1.3810.1.2.1 | NodemDRAM | |||
| 1.3.6.1.4.1.3810.1.2.1.1 | ScalarmemDescr | read-only | mandatory | A textual string containing information about the type of memory. |
| 1.3.6.1.4.1.3810.1.2.1.2 | ScalarmemMax | read-only | current | Maximum amount of free memory of this type. |
| 1.3.6.1.4.1.3810.1.2.1.3 | ScalarmemFree | read-only | current | Amount of free memory of this type. |
| 1.3.6.1.4.1.3810.1.2.2 | NodemFLASH | |||
| 1.3.6.1.4.1.3810.1.2.3 | NodemBUF | |||
| 1.3.6.1.4.1.3810.2 | Nodecxr-connect-stat | |||
| 1.3.6.1.4.1.3810.2 | NodelinkDown | A linkDown trap signifies that the sending protocol entity recognizes a failure in one of the communication links represented in the agent's configuration. | ||
| 1.3.6.1.4.1.3810.2.1 | Scalarcomlog | read-only | mandatory | Communication log as displayed in numstat -j. Index 0 is the last log entry and maximum value of index depends of calls and log depth (see $JOURL). |
| 1.3.6.1.4.1.3810.3 | Nodecxr-connect-phys | |||
| 1.3.6.1.4.1.3810.3 | NodelinkUp | A linkUp trap signifies that the sending protocol entity recognizes that one of the communication links represented in the agent's configuration has come up. | ||
| 1.3.6.1.4.1.3810.3.1 | TablechannelStatusTable | not-accessible | mandatory | A table containing all the possible shelves |
| 1.3.6.1.4.1.3810.3.2 | NodetypesTable | |||
| 1.3.6.1.4.1.3810.3.2.1 | Nodetype1 | |||
| 1.3.6.1.4.1.3810.3.2.1.1 | ScalarchannelType1 | read-only | mandatory | Reference Shelf Number |
| 1.3.6.1.4.1.3810.3.2.1.2 | ScalarchannelMaxNumber1 | read-only | mandatory | Reference Shelf Number |
| 1.3.6.1.4.1.3810.3.2.1.3 | ScalarchannelMaxInstalled1 | read-only | mandatory | Reference Shelf Number |
| 1.3.6.1.4.1.3810.3.2.2 | Nodetype2 | |||
| 1.3.6.1.4.1.3810.3.2.2.1 | ScalarchannelType2 | read-only | mandatory | Reference Shelf Number |
| 1.3.6.1.4.1.3810.3.2.2.2 | ScalarchannelMaxNumber2 | read-only | mandatory | Reference Shelf Number |
| 1.3.6.1.4.1.3810.3.2.2.3 | ScalarchannelMaxInstalled2 | read-only | mandatory | Reference Shelf Number |
| 1.3.6.1.4.1.3810.3.2.3 | Nodetype3 | |||
| 1.3.6.1.4.1.3810.3.2.3.1 | ScalarchannelType3 | read-only | mandatory | Reference Shelf Number |
| 1.3.6.1.4.1.3810.3.2.3.2 | ScalarchannelMaxNumber3 | read-only | mandatory | Reference Shelf Number |
| 1.3.6.1.4.1.3810.3.2.3.3 | ScalarchannelMaxInstalled3 | read-only | mandatory | Reference Shelf Number |
| 1.3.6.1.4.1.3810.3.2.4 | Nodetype4 | |||
| 1.3.6.1.4.1.3810.3.2.4.1 | ScalarchannelType4 | read-only | mandatory | Reference Shelf Number |
| 1.3.6.1.4.1.3810.3.2.4.2 | ScalarchannelMaxNumber4 | read-only | mandatory | Reference Shelf Number |
| 1.3.6.1.4.1.3810.3.2.4.3 | ScalarchannelMaxInstalled4 | read-only | mandatory | Reference Shelf Number |
| 1.3.6.1.4.1.3810.3.2.5 | Nodetype5 | |||
| 1.3.6.1.4.1.3810.3.2.5.1 | ScalarchannelType5 | read-only | mandatory | Reference Shelf Number |
| 1.3.6.1.4.1.3810.3.2.5.2 | ScalarchannelMaxNumber5 | read-only | mandatory | Reference Shelf Number |
| 1.3.6.1.4.1.3810.3.2.5.3 | ScalarchannelMaxInstalled5 | read-only | mandatory | Reference Shelf Number |
| 1.3.6.1.4.1.3810.3.2.6 | Nodetype6 | |||
| 1.3.6.1.4.1.3810.3.2.6.1 | ScalarchannelType6 | read-only | mandatory | Reference Shelf Number |
| 1.3.6.1.4.1.3810.3.2.6.2 | ScalarchannelMaxNumber6 | read-only | mandatory | Reference Shelf Number |
| 1.3.6.1.4.1.3810.3.2.6.3 | ScalarchannelMaxInstalled6 | read-only | mandatory | Reference Shelf Number |
| 1.3.6.1.4.1.3810.3.2.7 | Nodetype7 | |||
| 1.3.6.1.4.1.3810.3.2.7.1 | ScalarchannelType7 | read-only | mandatory | Reference Shelf Number |
| 1.3.6.1.4.1.3810.3.2.7.2 | ScalarchannelMaxNumber7 | read-only | mandatory | Reference Shelf Number |
| 1.3.6.1.4.1.3810.3.2.7.3 | ScalarchannelMaxInstalled7 | read-only | mandatory | Reference Shelf Number |
| 1.3.6.1.4.1.3810.3.2.8 | Nodetype8 | |||
| 1.3.6.1.4.1.3810.3.2.8.1 | ScalarchannelType8 | read-only | mandatory | Reference Shelf Number |
| 1.3.6.1.4.1.3810.3.2.8.2 | ScalarchannelMaxNumber8 | read-only | mandatory | Reference Shelf Number |
| 1.3.6.1.4.1.3810.3.2.8.3 | ScalarchannelMaxInstalled8 | read-only | mandatory | Reference Shelf Number |
| 1.3.6.1.4.1.3810.3.2.9 | Nodetype9 | |||
| 1.3.6.1.4.1.3810.3.2.9.1 | ScalarchannelType9 | read-only | mandatory | Reference Shelf Number |
| 1.3.6.1.4.1.3810.3.2.9.2 | ScalarchannelMaxNumber9 | read-only | mandatory | Reference Shelf Number |
| 1.3.6.1.4.1.3810.3.2.9.3 | ScalarchannelMaxInstalled9 | read-only | mandatory | Reference Shelf Number |
| 1.3.6.1.4.1.3810.3.2.10 | Nodetype10 | |||
| 1.3.6.1.4.1.3810.3.2.10.1 | ScalarchannelType10 | read-only | mandatory | Reference Shelf Number |
| 1.3.6.1.4.1.3810.3.2.10.2 | ScalarchannelMaxNumber10 | read-only | mandatory | Reference Shelf Number |
| 1.3.6.1.4.1.3810.3.2.10.3 | ScalarchannelMaxInstalled10 | read-only | mandatory | Reference Shelf Number |
| 1.3.6.1.4.1.3810.3.2.11 | Nodetype11 | |||
| 1.3.6.1.4.1.3810.3.2.11.1 | ScalarchannelType11 | read-only | mandatory | Reference Shelf Number |
| 1.3.6.1.4.1.3810.3.2.11.2 | ScalarchannelMaxNumber11 | read-only | mandatory | Reference Shelf Number |
| 1.3.6.1.4.1.3810.3.2.11.3 | ScalarchannelMaxInstalled11 | read-only | mandatory | Reference Shelf Number |
| 1.3.6.1.4.1.3810.3.2.12 | Nodetype12 | |||
| 1.3.6.1.4.1.3810.3.2.12.1 | ScalarchannelType12 | read-only | mandatory | Reference Shelf Number |
| 1.3.6.1.4.1.3810.3.2.12.2 | ScalarchannelMaxNumber12 | read-only | mandatory | Reference Shelf Number |
| 1.3.6.1.4.1.3810.3.2.12.3 | ScalarchannelMaxInstalled12 | read-only | mandatory | Reference Shelf Number |
| 1.3.6.1.4.1.3810.3.2.13 | Nodetype13 | |||
| 1.3.6.1.4.1.3810.3.2.13.1 | ScalarchannelType13 | read-only | mandatory | Reference Shelf Number |
| 1.3.6.1.4.1.3810.3.2.13.2 | ScalarchannelMaxNumber13 | read-only | mandatory | Reference Shelf Number |
| 1.3.6.1.4.1.3810.3.2.13.3 | ScalarchannelMaxInstalled13 | read-only | mandatory | Reference Shelf Number |
| 1.3.6.1.4.1.3810.3.2.14 | Nodetype14 | |||
| 1.3.6.1.4.1.3810.3.2.14.1 | ScalarchannelType14 | read-only | mandatory | Reference Shelf Number |
| 1.3.6.1.4.1.3810.3.2.14.2 | ScalarchannelMaxNumber14 | read-only | mandatory | Reference Shelf Number |
| 1.3.6.1.4.1.3810.3.2.14.3 | ScalarchannelMaxInstalled14 | read-only | mandatory | Reference Shelf Number |
| 1.3.6.1.4.1.3810.4 | NodeauthenticationFailure | An authenticationFailure trap signifies that the sending protocol entity is the addressee of a protocol message that is not properly authenticated. While imple… | ||
| 1.3.6.1.4.1.3810.200 | NodecomStart | This trap is generated when communication request is sended to AT. Channel number is given in trap. | ||
| 1.3.6.1.4.1.3810.201 | NodecomStop | This trap is generated when communication is ended. Channel number is given in trap. | ||
| 1.3.6.1.4.1.3810.202 | NodecomRefused | This trap is generated when communication is not accepted because remote number is not registered. Channel number and ISDN number are given in trap. | ||
| 1.3.6.1.4.1.3810.203 | NodecomIPDenied | This trap is generated when IP communication is denied because of filtration on IP address. IP address is given in trap. | ||
| 1.3.6.1.4.1.3810.204 | NodecomSockDenied | This trap is generated when IP communication is denied because of filtration on IP socket address and number. IP addresses are given in trap. | ||
| 1.3.6.1.4.1.3810.205 | NodecomIPXDenied | This trap is generated when IPX communication is denied because of filtration on IPX address. IPX address are given in trap. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DisplayString | OCTET STRING | ||
| PhysAddr | OCTET STRING |