DATALINK-MIB

389 objects

No module-level DESCRIPTION found.

Imported Objects

RFC-1212	OBJECT-TYPE
RFC-1215	TRAP-TYPE
RFC1065-SMI	Counter Gauge internet IpAddress mgmt NetworkAddress private TimeTicks
RFC1155-SMI	enterprises ObjectName
SNMPv2-TC	DisplayString

OID	Name	Access	Status	Description
1.3.6.1.4.1.3052	Nodeasentria
1.3.6.1.4.1.3052.1	Nodedatalink
1.3.6.1.4.1.3052.1.1	NodeproductIds
1.3.6.1.4.1.3052.1.1.1	ScalardatalinkThisProduct	read-only	mandatory	This is a factory-configured string for the product name
1.3.6.1.4.1.3052.1.2	NodeproductConfig
1.3.6.1.4.1.3052.1.2.1	Scalarproductname	read-only	mandatory	A second string which may also contain name/version info
1.3.6.1.4.1.3052.1.2.2	Scalarsystemversion	read-only	mandatory	system rom version number
1.3.6.1.4.1.3052.1.2.3	Scalarappversion	read-only	mandatory	application version
1.3.6.1.4.1.3052.1.2.4	Nodehardware
1.3.6.1.4.1.3052.1.2.4.1	Scalarnumberports	read-only	mandatory	number of RS232 ports found
1.3.6.1.4.1.3052.1.2.4.2	Scalarnetcard	read-only	mandatory	0 if no net card, 1 if net card found
1.3.6.1.4.1.3052.1.2.4.3	Scalarmodems	read-only	mandatory	0 if no modem, 1 if modem was found
1.3.6.1.4.1.3052.1.2.4.4	Scalarnetworkenabled	read-only	mandatory	0 if not enabled, 1 if enabled
1.3.6.1.4.1.3052.1.2.4.5	Scalarmemorysize	read-only	mandatory	memory size in K
1.3.6.1.4.1.3052.1.2.5	Nodefactorysetup
1.3.6.1.4.1.3052.1.2.5.1	Scalarmodemreport	read-write	mandatory	5-char string, speed to report for modem speed
1.3.6.1.4.1.3052.1.2.5.2	Scalarmodemportspeed	read-write	mandatory	modem port baud rate 38400, 19200, etc.
1.3.6.1.4.1.3052.1.2.5.3	Scalarmodemsetupstring	read-write	mandatory	modem setup string, e.g., ATe0v0s0=1
1.3.6.1.4.1.3052.1.2.5.4	Scalarmodemcddelay	read-write	mandatory	seconds after CD before sending answer string
1.3.6.1.4.1.3052.1.2.5.5	Scalarmodemtype	read-write	mandatory	number factory-assigned to this particular modem, manufacturer, etc.
1.3.6.1.4.1.3052.1.2.5.6	Scalarserialnumber	read-write	mandatory	up to 10 chars for factory-assigned serial number
1.3.6.1.4.1.3052.1.2.5.7	Scalardateofmanufacture	read-write	mandatory	up to 8 chars for factory-assigned date of manufacture
1.3.6.1.4.1.3052.1.2.6	Scalardatabasemode	read-write	mandatory	database compatibility mode, 1 -normal, 2 commandset2, etc.
1.3.6.1.4.1.3052.1.3	NodeunitIds
1.3.6.1.4.1.3052.1.3.1	ScalardatalinkSiteId	read-write	mandatory	Site ID string
1.3.6.1.4.1.3052.1.3.2	TableidByPortTable	not-accessible	mandatory	an id for type of data by port
1.3.6.1.4.1.3052.1.3.2.1	Rowsitebyport	not-accessible	mandatory	entry for table
1.3.6.1.4.1.3052.1.3.2.1.1	Columnsiteindex	read-only	mandatory	index for which port
1.3.6.1.4.1.3052.1.3.2.1.2	ColumnsiteID	read-write	mandatory	site id or type of data by port
1.3.6.1.4.1.3052.1.4	NodeserialPorts
1.3.6.1.4.1.3052.1.4.1	ScalarnumberPorts	read-only	mandatory	number of RS232 ports found.
1.3.6.1.4.1.3052.1.4.2	TableportSetupTable	not-accessible	mandatory	port setup table, serial params, collect data, etc.
1.3.6.1.4.1.3052.1.4.2.1	RowportSetupEntry	not-accessible	mandatory	port setup table, serial params, collect data, etc.
1.3.6.1.4.1.3052.1.4.2.1.1	ColumnportIndex	read-only	mandatory	index for table
1.3.6.1.4.1.3052.1.4.2.1.2	ColumnportBaud	read-write	mandatory	baud rate, 19200, 9600, etc.
1.3.6.1.4.1.3052.1.4.2.1.3	ColumnportWord	read-write	mandatory	word length, must be 7 or 8
1.3.6.1.4.1.3052.1.4.2.1.4	ColumnportParity	read-write	mandatory	a single-char string with values of N E or O
1.3.6.1.4.1.3052.1.4.2.1.5	ColumnportStopbits	read-write	mandatory	number of stop bits, must be 1
1.3.6.1.4.1.3052.1.4.2.1.6	ColumnportDataStore	read-write	mandatory	0 data is not stored, 1 data is stored from this port
1.3.6.1.4.1.3052.1.4.2.1.7	ColumnportBinaryMode	read-write	mandatory	0 data is ASCII, 1 data is binary
1.3.6.1.4.1.3052.1.4.2.1.8	ColumnportWrapMode	read-write	mandatory	0 oldest data not overwritten, 1 older data is overwritten
1.3.6.1.4.1.3052.1.4.2.1.9	ColumnportHskMode	read-write	mandatory	HSK mode to use when buffer close to full, 0 none, 1 xon, 2 DTR, 3 DTR and Xon
1.3.6.1.4.1.3052.1.4.2.1.10	ColumnportDateTimeStampMode	read-write	mandatory	Date/time stamp mode to use,bit mapped bit 0 - do date stamp bit 1 - include year bit 2 - include year 19xx or 20xx bit 3 - include day of week bit 4 - space a…
1.3.6.1.4.1.3052.1.4.2.1.11	ColumnportPTMode	read-write	mandatory	pass-through access mode. 0=none, 1=by modem, 2=by network any write kills the passthrough connection. any write requires private community name
1.3.6.1.4.1.3052.1.4.2.1.12	ColumnportPTTime	read-only	mandatory	pass-through access mode time of this connection, in seconds
1.3.6.1.4.1.3052.1.4.2.1.13	ColumnportStoreFile	read-write	mandatory	selects which data file data from this port is stored into
1.3.6.1.4.1.3052.1.4.2.1.14	ColumnportPtStripOutputLfs	read-write	mandatory	0/1 no/yes in pass-through, strip LFs going to device on this port
1.3.6.1.4.1.3052.1.4.2.1.15	ColumnportPtStripInputLfs	read-write	mandatory	0/1 no/yes in pass-through, strip LFs coming from device on this port
1.3.6.1.4.1.3052.1.4.2.1.16	ColumnportlowDTR	read-write	mandatory	0/1 no/yes set DTR low and only raise it on SysAdmin & bypass connections
1.3.6.1.4.1.3052.1.5	Nodetime
1.3.6.1.4.1.3052.1.5.1	Scalarcurrenttime	read-write	mandatory	Text string for date and time: SUN 01/02/98 12:34:27
1.3.6.1.4.1.3052.1.5.2	ScalarautoDstAdjust	read-write	mandatory	0 no adjust, 1 adjust
1.3.6.1.4.1.3052.1.6	Nodesnmpsetup
1.3.6.1.4.1.3052.1.6.1	ScalarsnmpTrapsEnabled	read-write	mandatory	0 do not send any traps, 1 do send traps
1.3.6.1.4.1.3052.1.6.2	TablesnmpManagerTable	not-accessible	mandatory	management station names and addresses
1.3.6.1.4.1.3052.1.6.2.1	RowsnmpTableEntry	not-accessible	mandatory	entry for snmp table
1.3.6.1.4.1.3052.1.6.2.1.1	ColumnsnmpMgrIndex	read-only	mandatory	index for table
1.3.6.1.4.1.3052.1.6.2.1.2	ColumnsnmpManagerIp	read-write	mandatory	the ip address of a manager
1.3.6.1.4.1.3052.1.6.2.1.3	ColumnsnmpManagerName	read-write	mandatory	the name of a manager, up to 80 chars
1.3.6.1.4.1.3052.1.6.3	ScalarsnmpTrapsAutoRepeatTime	read-write	mandatory	0 do not repeat, else number of minutes to repeat
1.3.6.1.4.1.3052.1.6.4	ScalarsnmpSendTestTrap	read-write	mandatory	0 on read, any Set sends test trap to all managers in table
1.3.6.1.4.1.3052.1.7	Nodepasswords
1.3.6.1.4.1.3052.1.7.1	ScalarmodemPasswords	read-write	mandatory	0 no modem passwords required, 1 modem passwords are required write requires private community name
1.3.6.1.4.1.3052.1.7.2	ScalartcpPasswords	read-write	mandatory	0 no telnet/tcp passwords required, 1 passwords are required write requires private community name
1.3.6.1.4.1.3052.1.7.3	ScalarftpPasswords	read-write	mandatory	0 no ftp passwords required, 1 passwords are required write requires private community name
1.3.6.1.4.1.3052.1.7.4	ScalarpromptPasswords	read-write	mandatory	0 no Password: prompt, 1 -> show Password: prompt
1.3.6.1.4.1.3052.1.7.5	NodecommandPassword
1.3.6.1.4.1.3052.1.7.5.1	ScalarcommandNeedsPassword	read-write	mandatory	0 not needed, 1 is needed write requires private community name
1.3.6.1.4.1.3052.1.7.5.2	ScalarcommandPasswordTimeout	read-write	mandatory	1-99, number of minutes of no activity which auto logs user out
1.3.6.1.4.1.3052.1.7.6	TablepasswordTable	not-accessible	mandatory	Table of password entries, r-w only with private comm. name
1.3.6.1.4.1.3052.1.7.6.1	RowpasswordTableEntry	not-accessible	mandatory	entry to password table
1.3.6.1.4.1.3052.1.7.6.1.1	ColumnpasswordIndex	read-only	mandatory	index to password table
1.3.6.1.4.1.3052.1.7.6.1.2	ColumnpasswordCommand	read-write	mandatory	password for command access
1.3.6.1.4.1.3052.1.7.6.1.3	ColumnpasswordAccess	read-write	mandatory	password for pass-through access
1.3.6.1.4.1.3052.1.8	Nodeftpsetup
1.3.6.1.4.1.3052.1.8.1	ScalarftpAutoDelete	read-write	mandatory	0 files not autodeleted, 1 deleted on reading
1.3.6.1.4.1.3052.1.8.2	ScalarftpDataMode	read-write	mandatory	0 normal, 1 compression mode 1, etc.
1.3.6.1.4.1.3052.1.8.3	NodeftpPush
1.3.6.1.4.1.3052.1.8.3.1	ScalarftpPushEnabled	read-write	mandatory	0-no, 1-yes, enables ftp data push
1.3.6.1.4.1.3052.1.8.3.2	ScalarftpPushTiming	read-write	mandatory	how often data is pushed, 2-255 minutes
1.3.6.1.4.1.3052.1.8.3.3	ScalarftpPushTimer	read-write	mandatory	timer which counts to ftpPushTiming
1.3.6.1.4.1.3052.1.8.3.4	ScalarftpPushIPAddress	read-write	mandatory	ip address of ftp server to which we push the data
1.3.6.1.4.1.3052.1.8.3.5	ScalarftpPushUser	read-write	mandatory	text string to send for the user id
1.3.6.1.4.1.3052.1.8.3.6	ScalarftpPushPass	read-write	mandatory	text string to send for the ftp server password
1.3.6.1.4.1.3052.1.8.3.7	ScalarftpPushAcct	read-write	mandatory	text string to send for the account, if used
1.3.6.1.4.1.3052.1.8.3.8	ScalarftpPushDir	read-write	mandatory	text string to send for the directory we CWD to
1.3.6.1.4.1.3052.1.8.3.9	TableftppushTable	not-accessible	mandatory	Table of ftp push enables
1.3.6.1.4.1.3052.1.8.3.9.1	RowftppushTableEntry	not-accessible	mandatory	entry to ftp push table
1.3.6.1.4.1.3052.1.8.3.9.1.1	ColumnftppushIndex	read-only	mandatory	index to ftp push table
1.3.6.1.4.1.3052.1.8.3.9.1.2	ColumnftppushEnable	read-write	mandatory	enable for ftp push, indexed by file
1.3.6.1.4.1.3052.1.8.3.10	ScalarftpPushAlarms	read-write	mandatory	0-no, 1-yes, do we push the ALARMS file
1.3.6.1.4.1.3052.1.8.3.11	ScalarftpPushCount	read-only	mandatory	number of ftp data pushes tried since reboot
1.3.6.1.4.1.3052.1.8.3.12	ScalarftpPushStatusMode	read-write	mandatory	0-none, 1-append, 2-replace, status file modes
1.3.6.1.4.1.3052.1.8.3.13	ScalarftpPushServerName	read-write	mandatory	Name of the FTP Push Targer Server
1.3.6.1.4.1.3052.1.9	Nodedatabases
1.3.6.1.4.1.3052.1.9.1	NodeentireDatabase
1.3.6.1.4.1.3052.1.9.1.1	NodedatabaseStatus
1.3.6.1.4.1.3052.1.9.1.1.1	ScalardatabasePfull	read-only	mandatory	percentage full of all database
1.3.6.1.4.1.3052.1.9.1.1.2	ScalardatabaseSize	read-only	mandatory	Size of Data Storage Area, in bytes
1.3.6.1.4.1.3052.1.9.1.1.3	ScalardatabaseRecordsAvailable	read-only	mandatory	Records which are available to read, total in all files
1.3.6.1.4.1.3052.1.9.1.1.4	ScalardatabaseRecordsDeleted	read-only	mandatory	Records which are deleted, total in all files
1.3.6.1.4.1.3052.1.9.1.2	TabledatabaseAlarmTable	not-accessible	mandatory	table for levels 1 2 3 of all database alarms and actions
1.3.6.1.4.1.3052.1.9.1.2.1	RowdatabaseAlarmEntry	not-accessible	mandatory	entry for database alarm config and actions table
1.3.6.1.4.1.3052.1.9.1.2.1.1	ColumndatabaseAlarmIndex	read-only	mandatory	Index for table, 1 2 or 3
1.3.6.1.4.1.3052.1.9.1.2.1.2	ColumndatabaseAlarmActive	read-write	mandatory	0/1, 1 = active
1.3.6.1.4.1.3052.1.9.1.2.1.3	ColumndatabaseAlarmThreshold	read-write	mandatory	1-99, percentage full threshold level
1.3.6.1.4.1.3052.1.9.1.2.1.4	ColumndatabaseAlarmBeeperActions	read-write	mandatory	0 1 2, -> none, 1/10 or 10/10
1.3.6.1.4.1.3052.1.9.1.2.1.5	ColumndatabaseAlarmSerialActions	read-write	mandatory	bits 0-7 show which messages 1-8 are sent
1.3.6.1.4.1.3052.1.9.1.2.1.6	ColumndatabaseAlarmPagerActions	read-write	mandatory	bits 0-7 show which pagers 1-8 are used
1.3.6.1.4.1.3052.1.9.1.2.1.7	ColumndatabaseAlarmCalloutActions	read-write	mandatory	bits 0-7 show which modem callouts 1-8 are used
1.3.6.1.4.1.3052.1.9.1.2.1.8	ColumndatabaseAlarmTrapActions	read-write	mandatory	0/1 for traps are sent or not
1.3.6.1.4.1.3052.1.9.1.3	ScalardatabaseAlarmFileStore	read-write	mandatory	0-no, 1-yes, store alarms in the ALARMS file
1.3.6.1.4.1.3052.1.9.1.4	ScalardatabaseAlarmFileMaxSize	read-write	mandatory	in K, max size for alarms file 4-32k
1.3.6.1.4.1.3052.1.9.2	NodedatabaseFiles
1.3.6.1.4.1.3052.1.9.2.1	Nodefilesetup
1.3.6.1.4.1.3052.1.9.2.1.1	ScalarcharmaskEnabled	read-write	mandatory	0/1 char masking enabled
1.3.6.1.4.1.3052.1.9.2.1.2	Scalarcharmask	read-write	mandatory	32-byte hex ascii for character masking
1.3.6.1.4.1.3052.1.9.2.1.3	ScalarmaxRecordChars	read-write	mandatory	max characters in an ASCII record
1.3.6.1.4.1.3052.1.9.2.1.4	ScalarbinRecordBlocking	read-write	mandatory	# chars max to block binary records into
1.3.6.1.4.1.3052.1.9.2.1.5	ScalarrecordCollectionTimeout	read-write	mandatory	# seconds to allow before terminating a record automatically
1.3.6.1.4.1.3052.1.9.2.2	TablefileTable	not-accessible	mandatory	table of directory entries
1.3.6.1.4.1.3052.1.9.2.2.1	RowfileTableEntry	not-accessible	mandatory	entry for table
1.3.6.1.4.1.3052.1.9.2.2.1.1	ColumnfileTableIndex	read-only	mandatory	index for the table
1.3.6.1.4.1.3052.1.9.2.2.1.2	ColumnfileName	read-only	mandatory	name of the file
1.3.6.1.4.1.3052.1.9.2.2.1.3	ColumnfileType	read-write	mandatory	type of data, up to 24 chars
1.3.6.1.4.1.3052.1.9.2.2.1.4	ColumnfileSize	read-only	mandatory	file size in bytes
1.3.6.1.4.1.3052.1.9.2.2.1.5	ColumnfileRecords	read-only	mandatory	file size in records
1.3.6.1.4.1.3052.1.9.2.2.1.6	ColumnfileRecordsAvailable	read-only	mandatory	# recs available
1.3.6.1.4.1.3052.1.9.2.2.1.7	ColumnfileRecordsDeleted	read-only	mandatory	# recs deleted
1.3.6.1.4.1.3052.1.9.2.2.1.8	ColumnfilePercentNow	read-only	mandatory	% of all of memory this file is, right now
1.3.6.1.4.1.3052.1.9.2.3	TablefileAlarms	not-accessible	mandatory	file alarms, indexed by file and threshold
1.3.6.1.4.1.3052.1.9.2.3.1	RowfileAlarmEntry	not-accessible	mandatory	entry to the table
1.3.6.1.4.1.3052.1.9.2.3.1.1	ColumnfileAlarmFileIndex	read-only	mandatory	index for filenumber
1.3.6.1.4.1.3052.1.9.2.3.1.2	ColumnfileAlarmThresholdIndex	read-only	mandatory	index for filenumber threshold
1.3.6.1.4.1.3052.1.9.2.3.1.3	ColumnfileAlarmActive	read-write	mandatory	0/1 this file alarm active
1.3.6.1.4.1.3052.1.9.2.3.1.4	ColumnfileAlarmThreshold	read-write	mandatory	1-99, threshold level
1.3.6.1.4.1.3052.1.9.2.3.1.5	ColumnfileAlarmBeeperActions	read-write	mandatory	0 1 2, none, 1/10 or 10/10
1.3.6.1.4.1.3052.1.9.2.3.1.6	ColumnfileAlarmSerialActions	read-write	mandatory	bits 0-7 show which messages 1-8 are sent
1.3.6.1.4.1.3052.1.9.2.3.1.7	ColumnfileAlarmPagerActions	read-write	mandatory	bits 0-7 show which pagers 1-8 are used
1.3.6.1.4.1.3052.1.9.2.3.1.8	ColumnfileAlarmCalloutActions	read-write	mandatory	bits 0-7 show which modem callouts 1-8 are used
1.3.6.1.4.1.3052.1.9.2.3.1.9	ColumnfileAlarmTrapActions	read-write	mandatory	0/1 for traps are sent or not
1.3.6.1.4.1.3052.1.10	Nodealarms
1.3.6.1.4.1.3052.1.10.1	TabledataAlarmTable	not-accessible	mandatory	table of read-only items for data alarm setup
1.3.6.1.4.1.3052.1.10.1.1	RowdataAlarmEntry	not-accessible	mandatory	Data alarm table entry
1.3.6.1.4.1.3052.1.10.1.1.1	ColumndataAlarmIndex	read-only	mandatory	index for data alarms
1.3.6.1.4.1.3052.1.10.1.1.2	ColumndataAlarmActive	read-only	mandatory	0/1 active
1.3.6.1.4.1.3052.1.10.1.1.3	ColumndataAlarmName	read-only	mandatory	name of alarm
1.3.6.1.4.1.3052.1.10.1.1.4	ColumndataAlarmCounter	read-only	mandatory	counter for this alarm
1.3.6.1.4.1.3052.1.10.1.1.5	ColumndataAlarmThreshold	read-only	mandatory	threshold for this alarm
1.3.6.1.4.1.3052.1.10.1.1.6	ColumndataAlarmClearMode	read-only	mandatory	code for clearing mode
1.3.6.1.4.1.3052.1.10.1.1.7	ColumndataAlarmClearTime	read-only	mandatory	time of day, e.g., 01:20
1.3.6.1.4.1.3052.1.10.1.1.8	ColumndataAlarmAcked	read-write	mandatory	0 on read, any set to ack this alarm
1.3.6.1.4.1.3052.1.10.1.1.9	ColumndataAlarmBeeperActions	read-only	mandatory	0 1 2, none, 1/10 or 10/10
1.3.6.1.4.1.3052.1.10.1.1.10	ColumndataAlarmSerialActions	read-only	mandatory	bits 0-7 show which messages 1-8 are sent
1.3.6.1.4.1.3052.1.10.1.1.11	ColumndataAlarmPagerActions	read-only	mandatory	bits 0-7 show which pagers 1-8 are used
1.3.6.1.4.1.3052.1.10.1.1.12	ColumndataAlarmCalloutActions	read-only	mandatory	bits 0-7 show which modem callouts 1-8 are used
1.3.6.1.4.1.3052.1.10.1.1.13	ColumndataAlarmTrapActions	read-only	mandatory	0/1 for traps are sent or not
1.3.6.1.4.1.3052.1.10.1.1.14	ColumndataAlarmString	read-only	mandatory	last data alarm string for this alarm
1.3.6.1.4.1.3052.1.10.1.1.15	ColumndataAlarmPort	read-only	mandatory	port number for last data alarm string for this alarm
1.3.6.1.4.1.3052.1.10.1.1.16	ColumndataAlarmAutoClear	read-only	mandatory	0/1 disabled/enabled to auto clear counter when it reached threshold
1.3.6.1.4.1.3052.1.10.2	TablesensorAlarmTable	not-accessible	mandatory	table of read-only items for sensor alarm setup
1.3.6.1.4.1.3052.1.10.2.1	RowsensorAlarmEntry	not-accessible	mandatory	sensor alarm table entry
1.3.6.1.4.1.3052.1.10.2.1.1	ColumnsensorAlarmIndex	read-only	mandatory	index for sensor alarms
1.3.6.1.4.1.3052.1.10.2.1.2	ColumnsensorAlarmActive	read-write	mandatory	0/1 active
1.3.6.1.4.1.3052.1.10.2.1.3	ColumnsensorAlarmName	read-write	mandatory	name of alarm
1.3.6.1.4.1.3052.1.10.2.1.4	ColumnsensorAlarmMode	read-write	mandatory	0 - open active, 1 - closed active
1.3.6.1.4.1.3052.1.10.2.1.5	ColumnsensorAlarmCounter	read-write	mandatory	counter for this alarm
1.3.6.1.4.1.3052.1.10.2.1.6	ColumnsensorAlarmThreshold	read-write	mandatory	threshold for this alarm
1.3.6.1.4.1.3052.1.10.2.1.7	ColumnsensorAlarmAcked	read-write	mandatory	0 on read, any set to ack this alarm
1.3.6.1.4.1.3052.1.10.2.1.8	ColumnsensorAlarmBeeperActions	read-write	mandatory	0 1 2, none, 1/10 or 10/10
1.3.6.1.4.1.3052.1.10.2.1.9	ColumnsensorAlarmSerialActions	read-write	mandatory	bits 0-7 show which messages 1-8 are sent
1.3.6.1.4.1.3052.1.10.2.1.10	ColumnsensorAlarmPagerActions	read-write	mandatory	bits 0-7 show which pagers 1-8 are used
1.3.6.1.4.1.3052.1.10.2.1.11	ColumnsensorAlarmCalloutActions	read-write	mandatory	bits 0-7 show which modem callouts 1-8 are used
1.3.6.1.4.1.3052.1.10.2.1.12	ColumnsensorAlarmTrapActions	read-write	mandatory	0/1 for traps are sent or not
1.3.6.1.4.1.3052.1.10.2.1.13	ColumnsensorAlarmState	read-only	mandatory	0-> open 1-> closed for current state
1.3.6.1.4.1.3052.1.10.3	NodenodataAlarms
1.3.6.1.4.1.3052.1.10.3.1	TablenodataAlarmStatus	not-accessible	mandatory	no data status table
1.3.6.1.4.1.3052.1.10.3.1.1	RownodataAlarmStatusEntry	not-accessible	mandatory	status table entry
1.3.6.1.4.1.3052.1.10.3.1.1.1	ColumnnodataAlarmStatusIndex	read-only	mandatory	index for table
1.3.6.1.4.1.3052.1.10.3.1.1.2	ColumnnodataAlarmStatusCounter	read-write	mandatory	the nodata counter
1.3.6.1.4.1.3052.1.10.3.1.1.3	ColumnnodataAlarmStatusAcked	read-write	mandatory	reads as 0, any write acks this alarm
1.3.6.1.4.1.3052.1.10.3.2	TablenodataTable	not-accessible	mandatory	nodata table
1.3.6.1.4.1.3052.1.10.3.2.1	RownodataTableEntry	not-accessible	mandatory	nodata defn. table entry
1.3.6.1.4.1.3052.1.10.3.2.1.1	ColumnnodataTablePortIndex	not-accessible	mandatory	index by port
1.3.6.1.4.1.3052.1.10.3.2.1.2	ColumnnodataTableScheduleIndex	not-accessible	mandatory	index by schedule
1.3.6.1.4.1.3052.1.10.3.2.1.3	ColumnnodataTableLevelIndex	not-accessible	mandatory	index by level
1.3.6.1.4.1.3052.1.10.3.2.1.4	ColumnnodataTableActive	read-write	mandatory	0/1 , enabled or not
1.3.6.1.4.1.3052.1.10.3.2.1.5	ColumnnodataTableSchedule	read-write	mandatory	schedule, format is hh:mm-hh:mm
1.3.6.1.4.1.3052.1.10.3.2.1.6	ColumnnodataTableThreshold	read-write	mandatory	#minutes for no data for alarm
1.3.6.1.4.1.3052.1.10.3.2.1.7	ColumnnodataTableBeeperActions	read-write	mandatory	0 1 2, none, 1/10 or 10/10
1.3.6.1.4.1.3052.1.10.3.2.1.8	ColumnnodataTableSerialActions	read-write	mandatory	bits 0-7 show which messages 1-8 are sent
1.3.6.1.4.1.3052.1.10.3.2.1.9	ColumnnodataTablePagerActions	read-write	mandatory	bits 0-7 show which pagers 1-8 are used
1.3.6.1.4.1.3052.1.10.3.2.1.10	ColumnnodataTableCalloutActions	read-write	mandatory	bits 0-7 show which modem callouts 1-8 are used
1.3.6.1.4.1.3052.1.10.3.2.1.11	ColumnnodataTableTrapActions	read-write	mandatory	0/1 for traps are sent or not
1.3.6.1.4.1.3052.1.10.3.3	NodenodataAlarmHolidays
1.3.6.1.4.1.3052.1.10.3.3.1	ScalarnodataNumberHolidays	read-only	mandatory	number of nodata holidays defined
1.3.6.1.4.1.3052.1.10.3.3.2	TablenodataHolidayTable	not-accessible	mandatory	holiday table
1.3.6.1.4.1.3052.1.10.3.3.2.1	RownodataHolidayTableEntry	not-accessible	mandatory	holiday table entry
1.3.6.1.4.1.3052.1.10.3.3.2.1.1	ColumnnodataHolidayIndex	read-only	mandatory	index for holiday list
1.3.6.1.4.1.3052.1.10.3.3.2.1.2	ColumnnodataHolidayItem	read-only	mandatory	holiday list item, format is mm/dd
1.3.6.1.4.1.3052.1.10.3.3.3	ScalarnodataHolidayAdd	read-write	mandatory	null on read, set with holiday to add MM/DD
1.3.6.1.4.1.3052.1.10.3.3.4	ScalarnodataHolidayDelete	read-write	mandatory	null on read, set with holiday to delete MM/DD
1.3.6.1.4.1.3052.1.10.3.3.5	ScalarnodataHolidayClear	read-write	mandatory	read returns 0, write requires private community name. used to clear the holiday list
1.3.6.1.4.1.3052.1.10.4	TablescheduleAlarmTable	not-accessible	mandatory	scheduled alarm table
1.3.6.1.4.1.3052.1.10.4.1	RowscheduleAlarmEntry	not-accessible	mandatory	schedule table entry
1.3.6.1.4.1.3052.1.10.4.1.1	ColumnscheduleIndex	read-only	mandatory	day index
1.3.6.1.4.1.3052.1.10.4.1.2	ColumnscheduleActive	read-write	mandatory	if active or not
1.3.6.1.4.1.3052.1.10.4.1.3	ColumnscheduleTime	read-write	mandatory	time of day format is: hh:mm
1.3.6.1.4.1.3052.1.10.4.1.4	ColumnscheduleAcked	read-write	mandatory	reads 0, any set acks alarm
1.3.6.1.4.1.3052.1.10.4.1.5	ColumnscheduleBeeperActions	read-write	mandatory	0 1 2, none, 1/10 or 10/10
1.3.6.1.4.1.3052.1.10.4.1.6	ColumnscheduleSerialActions	read-write	mandatory	bits 0-7 show which messages 1-8 are sent
1.3.6.1.4.1.3052.1.10.4.1.7	ColumnschedulePagerActions	read-write	mandatory	bits 0-7 show which pagers 1-8 are used
1.3.6.1.4.1.3052.1.10.4.1.8	ColumnscheduleCalloutActions	read-write	mandatory	bits 0-7 show which modem callouts 1-8 are used
1.3.6.1.4.1.3052.1.10.4.1.9	ColumnscheduleTrapActions	read-write	mandatory	0/1 for traps are sent or not
1.3.6.1.4.1.3052.1.11	Nodeactions
1.3.6.1.4.1.3052.1.11.1	NodeactionsBuzzer
1.3.6.1.4.1.3052.1.11.1.1	ScalaractionsBuzzerState	read-only	mandatory	current buzzer state 0.1.2
1.3.6.1.4.1.3052.1.11.2	TableactionsSerialTable	not-accessible	mandatory	serial message table
1.3.6.1.4.1.3052.1.11.2.1	RowactionsSerialTableEntry	not-accessible	mandatory	serial table entry
1.3.6.1.4.1.3052.1.11.2.1.1	ColumnserialTableIndex	read-only	mandatory	serial table index
1.3.6.1.4.1.3052.1.11.2.1.2	ColumnserialTableMessage	read-write	mandatory	serial table string
1.3.6.1.4.1.3052.1.11.3	TableactionsPagerTable	not-accessible	mandatory	pager table
1.3.6.1.4.1.3052.1.11.3.1	RowactionsPagerTableEntry	not-accessible	mandatory	pager table entry
1.3.6.1.4.1.3052.1.11.3.1.1	ColumnpagerTableIndex	read-only	mandatory	table index
1.3.6.1.4.1.3052.1.11.3.1.2	ColumnpagerType	read-write	mandatory	0-numeric, 1-alpha
1.3.6.1.4.1.3052.1.11.3.1.3	ColumnpagerPhonenumber	read-write	mandatory	phone number to call for pager
1.3.6.1.4.1.3052.1.11.3.1.4	ColumnpagerID	read-write	mandatory	ID or 2nd number to dial
1.3.6.1.4.1.3052.1.11.3.1.5	ColumnpagerDialDelay	read-write	mandatory	# seconds on numeric to delay between dial and send pagerID or message
1.3.6.1.4.1.3052.1.11.3.1.6	ColumnpagerHangupDelay	read-write	mandatory	# seconds on numeric to delay between messages and before hangup
1.3.6.1.4.1.3052.1.11.3.1.7	ColumnpagerMessage	read-write	mandatory	message, either alpha or numeric
1.3.6.1.4.1.3052.1.11.3.1.8	ColumnpagerSendId	read-write	mandatory	0/1 send unit ID or not to pager
1.3.6.1.4.1.3052.1.11.3.1.9	ColumnpagerSendReason	read-write	mandatory	0/1 send reason for page or not to pager
1.3.6.1.4.1.3052.1.11.3.1.10	ColumnpagerMaxAttempts	read-write	mandatory	max tries to be successful
1.3.6.1.4.1.3052.1.11.3.1.11	ColumnpagerAttempts	read-write	mandatory	current number of tries
1.3.6.1.4.1.3052.1.11.3.1.12	ColumnpagerAttemptDelay	read-write	mandatory	# minutes between attempts
1.3.6.1.4.1.3052.1.11.3.1.13	ColumnpagerRepeat	read-write	mandatory	0/1 do we repeat successful
1.3.6.1.4.1.3052.1.11.3.1.14	ColumnpagerRepeatDelay	read-write	mandatory	# minutes between repeats, if used
1.3.6.1.4.1.3052.1.11.4	TableactionsCalloutTable	not-accessible	mandatory	callout table
1.3.6.1.4.1.3052.1.11.4.1	RowactionsCalloutTableEntry	not-accessible	mandatory	callout table entry
1.3.6.1.4.1.3052.1.11.4.1.1	ColumncalloutTableIndex	read-only	mandatory	table index
1.3.6.1.4.1.3052.1.11.4.1.2	ColumncalloutPhonenumber	read-write	mandatory	phone number to call for callout
1.3.6.1.4.1.3052.1.11.4.1.3	ColumncalloutMaxConnecttime	read-write	mandatory	# seconds to wait for carrier
1.3.6.1.4.1.3052.1.11.4.1.4	ColumncalloutMessage	read-write	mandatory	message to send
1.3.6.1.4.1.3052.1.11.4.1.5	ColumncalloutSendId	read-write	mandatory	0/1 send unit ID or not to callout
1.3.6.1.4.1.3052.1.11.4.1.6	ColumncalloutSendReason	read-write	mandatory	0/1 send reason for page or not to callout
1.3.6.1.4.1.3052.1.11.4.1.7	ColumncalloutCommandWait	read-write	mandatory	#seconds to wait for a command on a callout before hangup
1.3.6.1.4.1.3052.1.11.4.1.8	ColumncalloutMaxAttempts	read-write	mandatory	max tries to be successful
1.3.6.1.4.1.3052.1.11.4.1.9	ColumncalloutAttempts	read-write	mandatory	current number of tries
1.3.6.1.4.1.3052.1.11.4.1.10	ColumncalloutAttemptDelay	read-write	mandatory	# minutes between attempts
1.3.6.1.4.1.3052.1.11.4.1.11	ColumncalloutRepeat	read-write	mandatory	0/1 do we repeat successful
1.3.6.1.4.1.3052.1.11.4.1.12	ColumncalloutRepeatDelay	read-write	mandatory	# minutes between repeats, if used
1.3.6.1.4.1.3052.1.11.5	NodeactionsTraps
1.3.6.1.4.1.3052.1.11.5.1	ScalaractionsTrapsEntSpecific	read-write	mandatory	0/1 enterprise specific traps enabled
1.3.6.1.4.1.3052.1.11.5.2	ScalaractionsTrapsEntSpecCount	read-only	mandatory	number of enterprise specific traps sent since last re-boot
1.3.6.1.4.1.3052.1.12	Nodecontrols
1.3.6.1.4.1.3052.1.12.1	NodeopSettings
1.3.6.1.4.1.3052.1.12.1.1	Scalarlinefeeds	read-write	mandatory	0/1 are linefeeds added to CRs on command responses?
1.3.6.1.4.1.3052.1.12.1.2	Scalarduplex	read-write	mandatory	0-half 1-full
1.3.6.1.4.1.3052.1.12.1.3	Scalarresponse	read-write	mandatory	0-codes 1-words
1.3.6.1.4.1.3052.1.12.1.4	ScalardatafilterEnabled	read-write	mandatory	0/1 off/on
1.3.6.1.4.1.3052.1.12.1.5	ScalaralarmfilterEnabled	read-write	mandatory	0/1 off/on
1.3.6.1.4.1.3052.1.12.1.6	NodeauxportMode
1.3.6.1.4.1.3052.1.12.1.6.1	ScalaroperatingMode	read-write	mandatory	1 command 2 input/access 3 unused 4 inline 5 extmodem
1.3.6.1.4.1.3052.1.12.1.6.2	ScalarinlineMode	read-write	mandatory	1,2,3 if inline, mode 1 (N->2) mode 2 (1->2, 3->4) mode 3 (1->2, 3->4, 5->6)
1.3.6.1.4.1.3052.1.12.1.6.3	ScalarinlineSource	read-write	mandatory	if inline and inlineMode==1, source of I/O2 inline
1.3.6.1.4.1.3052.1.12.1.6.4	NodeinlineHskMode
1.3.6.1.4.1.3052.1.12.1.6.4.1	ScalarinlineHsk2	read-write	mandatory	handshake mode 0-3 for inline port I/O 2
1.3.6.1.4.1.3052.1.12.1.6.4.2	ScalarinlineHsk4	read-write	mandatory	handshake mode 0-3 for inline port I/O 4
1.3.6.1.4.1.3052.1.12.1.6.4.3	ScalarinlineHsk6	read-write	mandatory	handshake mode 0-3 for inline port I/O 6
1.3.6.1.4.1.3052.1.12.1.7	ScalarsureEnabled	read-write	mandatory	0/1 off/on
1.3.6.1.4.1.3052.1.12.1.8	ScalarcommandTcpipTimeout	read-write	mandatory	0-none, else number of no-activity minutes -> tcpip command to drop
1.3.6.1.4.1.3052.1.12.1.9	ScalarsysadminTcpipTimeout	read-write	mandatory	0-none, else number of no-activity minutes -> tcpip sysadmin to drop
1.3.6.1.4.1.3052.1.12.1.10	ScalarbypassEndchar	read-write	mandatory	ascii value for character to exit bypass mode. default ->27
1.3.6.1.4.1.3052.1.12.1.11	ScalarrouterAutoPing	read-write	mandatory	0/1 = no/yes, default is 0, do we ping the default router every 10 minutes?
1.3.6.1.4.1.3052.1.12.2	NodemodemSettings
1.3.6.1.4.1.3052.1.12.2.1	ScalarmodemParity	read-write	mandatory	1 7E 2 7O 3 8N
1.3.6.1.4.1.3052.1.12.2.2	ScalarmodemUserSetup	read-write	mandatory	sent to modem on init before the factory setup string
1.3.6.1.4.1.3052.1.12.2.3	ScalarmodemTapSetup	read-write	mandatory	sent to modem on just before doing TAP (alpha pager) protocol
1.3.6.1.4.1.3052.1.12.2.4	ScalarmodemAnswerString	read-write	mandatory	sent when modem makes connection
1.3.6.1.4.1.3052.1.12.2.5	ScalarmodemExtSetup	read-write	mandatory	sent to ext. modem for setup string
1.3.6.1.4.1.3052.1.12.2.6	ScalarmodemExtSetupTime	read-write	mandatory	# minutes of idle time between sending ext. modem setup string
1.3.6.1.4.1.3052.1.12.2.7	ScalarmodemInactivityTimer	read-write	mandatory	# minutes of no transmit which aborts a connection
1.3.6.1.4.1.3052.1.12.2.8	ScalarmodemAutoexecString	read-write	mandatory	command string which auto-executes after modem connection if no other command within 10 seconds
1.3.6.1.4.1.3052.1.12.2.9	ScalarmodemAutoexecEnabled	read-write	mandatory	0/1 autoexec enabled
1.3.6.1.4.1.3052.1.12.2.10	ScalarmodemTimeBetweenOutbound	read-write	mandatory	# seconds (minimum) between outbound call attempts
1.3.6.1.4.1.3052.1.12.3	NodedataRelease
1.3.6.1.4.1.3052.1.12.3.1	ScalarreleaseMode	read-write	mandatory	1-Line 3-CBB 4-Xmodem
1.3.6.1.4.1.3052.1.12.3.2	ScalarautodeleteEnable	read-write	mandatory	1/2 off/on autodelete for CBB and Xmodem
1.3.6.1.4.1.3052.1.12.3.3	ScalarreleaseCompressed	read-write	mandatory	1-compressed 2-decompressed
1.3.6.1.4.1.3052.1.12.4	NodeotherControls
1.3.6.1.4.1.3052.1.12.4.1	ScalarwaitMode	read-write	mandatory	1/2 off/on wait for 02 after 01 on rlmodes
1.3.6.1.4.1.3052.1.12.4.2	ScalartagMode	read-write	mandatory	1/2 off/on Line/Block tag enabled
1.3.6.1.4.1.3052.1.12.4.3	ScalarcrcMode	read-write	mandatory	1/2 off/on add CRC to ascii releases
1.3.6.1.4.1.3052.1.12.4.4	ScalardleMode	read-write	mandatory	1/2 off/on use DLE stuffing on CBB
1.3.6.1.4.1.3052.1.12.4.5	ScalarcbbRetransmits	read-write	mandatory	# times a block retransmitted in CBB mode
1.3.6.1.4.1.3052.1.12.4.6	ScalarcbbTimeout	read-write	mandatory	# seconds to wait for an ack before retransmit in CBB mode
1.3.6.1.4.1.3052.1.12.5	ScalaractiveDatabase	read-write	mandatory	selects a file. ports 2001-2006 auto select this variable
1.3.6.1.4.1.3052.1.13	Nodealarmhistory
1.3.6.1.4.1.3052.1.13.1	NodeactionQueue
1.3.6.1.4.1.3052.1.13.1.1	ScalaractionCount	read-only	mandatory	number of active items in action table, 0-nn
1.3.6.1.4.1.3052.1.13.1.2	TableactionTable	not-accessible	mandatory	action queue table
1.3.6.1.4.1.3052.1.13.1.2.1	RowactionTableEntry	not-accessible	mandatory	action queue entry
1.3.6.1.4.1.3052.1.13.1.2.1.1	ColumnactionTableIndex	read-only	mandatory	action table entry
1.3.6.1.4.1.3052.1.13.1.2.1.2	ColumnactionAcked	read-write	mandatory	reads 0, any set removes (acks) this action
1.3.6.1.4.1.3052.1.13.1.2.1.3	ColumnactionReason	read-only	mandatory	code reason for action
1.3.6.1.4.1.3052.1.13.1.2.1.4	ColumnactionReasonID	read-only	mandatory	which of the (reasons) e.g, alarm 3 vs. alarm 4
1.3.6.1.4.1.3052.1.13.1.2.1.5	ColumnactionReasonLevel	read-only	mandatory	which of the levels for alarms which have 1-3 levels
1.3.6.1.4.1.3052.1.13.1.2.1.6	ColumnactionType	read-only	mandatory	type of action being taken (page, callout, etc.)
1.3.6.1.4.1.3052.1.13.1.2.1.7	ColumnactionTypeID	read-only	mandatory	which of the actions e.g, pager 3 vs. pager 4
1.3.6.1.4.1.3052.1.13.1.2.1.8	ColumnactionRepeatTime	read-only	mandatory	#minutes between repeats of attempts of this action
1.3.6.1.4.1.3052.1.13.1.2.1.9	ColumnactionAttempts	read-only	mandatory	# of attempts to try this action so far
1.3.6.1.4.1.3052.1.13.1.2.1.10	ColumnactionNextAttempt	read-only	mandatory	# minutes until the next attempt of this action
1.3.6.1.4.1.3052.1.13.1.2.1.11	ColumnactionTimeStamp	read-only	mandatory	date and time string: 02/34 12:34, or text message if no items
1.3.6.1.4.1.3052.1.13.2	NodeactionHistory
1.3.6.1.4.1.3052.1.13.2.1	ScalarhistoryCount	read-only	mandatory	number of history items in history table, 0-nn
1.3.6.1.4.1.3052.1.13.2.2	TablehistoryTable	not-accessible	mandatory	action history table
1.3.6.1.4.1.3052.1.13.2.2.1	RowhistoryTableEntry	not-accessible	mandatory	history queue entry
1.3.6.1.4.1.3052.1.13.2.2.1.1	ColumnhistoryTableIndex	read-only	mandatory	history table entry
1.3.6.1.4.1.3052.1.13.2.2.1.2	ColumnhistoryEntryType	read-write	mandatory	type of entry (e.g., modem fail, pager pass, etc.)
1.3.6.1.4.1.3052.1.13.2.2.1.3	ColumnhistoryReason	read-only	mandatory	code reason for history
1.3.6.1.4.1.3052.1.13.2.2.1.4	ColumnhistoryReasonID	read-only	mandatory	which of the (reasons) e.g, alarm 3 vs. alarm 4
1.3.6.1.4.1.3052.1.13.2.2.1.5	ColumnhistoryReasonLevel	read-only	mandatory	which of the levels for alarms which have 1-3 levels
1.3.6.1.4.1.3052.1.13.2.2.1.6	ColumnhistoryType	read-only	mandatory	type of history being taken (page, callout, etc.)
1.3.6.1.4.1.3052.1.13.2.2.1.7	ColumnhistoryTypeID	read-only	mandatory	which of the historys e.g, pager 3 vs. pager 4
1.3.6.1.4.1.3052.1.13.2.2.1.8	ColumnhistoryTimeStamp	read-only	mandatory	date and time string: 02/34 12:34, or text message if no items
1.3.6.1.4.1.3052.1.13.2.2.1.9	ColumnhistoryClearLog	read-write	mandatory	reads 0, any set clears all history log items
1.3.6.1.4.1.3052.1.13.3	ScalarlastCalloutPageReason	read-only	mandatory	the reason string for the last callout or page, or NONE if never used
1.3.6.1.4.1.3052.1.14	Noderealtimesocket
1.3.6.1.4.1.3052.1.14.1	ScalarrtsShowAnswer	read-write	deprecated	0-no 1-yes, show answer string on connection (deprecated)
1.3.6.1.4.1.3052.1.14.2	ScalarrtsNeedPassword	read-only	deprecated	0-no 1-yes, need password on RTS connection (deprecated)
1.3.6.1.4.1.3052.1.14.3	ScalarrtsWaitXon	read-write	deprecated	0-no 1-yes, wait for Xon after connection before sending data (deprecated)
1.3.6.1.4.1.3052.1.14.4	ScalarrtsIdleTimeout	read-write	deprecated	0-255, 0-none, 1-255 #idle minutes no data = shutdown socket (deprecated)
1.3.6.1.4.1.3052.1.14.5	ScalarrtsEmptyClose	read-write	deprecated	0->no, 1-> yes, when file empty close socket (polling, not rt data) (deprecated)
1.3.6.1.4.1.3052.1.14.6	TablertsTable	not-accessible	mandatory	real time socket table
1.3.6.1.4.1.3052.1.14.6.1	RowrtsTableEntry	not-accessible	mandatory	rts table entry
1.3.6.1.4.1.3052.1.14.6.1.1	ColumnrtsTableIndex	read-only	mandatory	rts table entry index
1.3.6.1.4.1.3052.1.14.6.1.2	ColumnrtsNoStore	read-write	mandatory	0-allow storage, 1-don't store data when RTS socket not connected
1.3.6.1.4.1.3052.1.14.6.1.3	ColumnrtsDenied	read-write	mandatory	0-don't allow, 1=yes allow this rts socket to connect
1.3.6.1.4.1.3052.1.14.6.1.4	ColumnrtsSocketState	read-only	mandatory	0-closed, 1-wait for pass, 2-wait for xon, 3=open for data
1.3.6.1.4.1.3052.1.14.6.1.5	ColumnrtsPortShowAnswer	read-write	mandatory	0-no 1-yes, show answer string on connection
1.3.6.1.4.1.3052.1.14.6.1.6	ColumnrtsPortNeedPassword	read-only	mandatory	0-no 1-yes, need password on RTS connection
1.3.6.1.4.1.3052.1.14.6.1.7	ColumnrtsPortWaitXon	read-write	mandatory	0-no 1-yes, wait for Xon after connection before sending data
1.3.6.1.4.1.3052.1.14.6.1.8	ColumnrtsPortIdleTimeout	read-write	mandatory	0-255, 0-none, 1-255 #idle minutes no data = shutdown socket
1.3.6.1.4.1.3052.1.14.6.1.9	ColumnrtsPortEmptyClose	read-write	mandatory	0->no, 1-> yes, when file empty close socket (polling, not rt data)
1.3.6.1.4.1.3052.1.15	Nodeiprestrictions
1.3.6.1.4.1.3052.1.15.1	TableiprestrictTable	not-accessible	mandatory	ip restrictions table
1.3.6.1.4.1.3052.1.15.1.1	RowiprestrictTableEntry	not-accessible	mandatory	ip restriction table entry
1.3.6.1.4.1.3052.1.15.1.1.1	ColumniprestrictTableIndex	read-only	mandatory	ip restrict table entry index
1.3.6.1.4.1.3052.1.15.1.1.2	ColumniprestrictIpAddress	read-only	mandatory	an ip address which forces a restriction or allowance for an ip range
1.3.6.1.4.1.3052.1.15.2	ScalarsuspendIPRestrictions	read-write	mandatory	read returns 0, writing requires the private community name. default is 0 set to 1 to suspend IP restrictions while loading the list set back to 0 to allow the…
1.3.6.1.4.1.3052.1.15.3	ScalarkillIPRestrictions	read-write	mandatory	read returns 0, writing requires the private community name. any set removes all entries from the IP restrcition list.
1.3.6.1.4.1.3052.1.15.4	ScalaraddIPRestrictions	read-write	mandatory	read returns 0, writing requires the private community name. any set adds an entry to the IP restriction list note that list is no re-sorted, so must add in or…
1.3.6.1.4.1.3052.1.16	Nodeipsetup
1.3.6.1.4.1.3052.1.16.1	NodeipCurrent
1.3.6.1.4.1.3052.1.16.1.1	ScalaripCurrentStatic	read-only	mandatory	1=static, 0=dynamic
1.3.6.1.4.1.3052.1.16.1.2	ScalaripCurrentAddress	read-only	mandatory	current IP address
1.3.6.1.4.1.3052.1.16.1.3	ScalaripCurrentSubnetMask	read-only	mandatory	current subnet mask
1.3.6.1.4.1.3052.1.16.1.4	ScalaripCurrentDefaultRouter	read-only	mandatory	current default router
1.3.6.1.4.1.3052.1.16.2	NodeipNew
1.3.6.1.4.1.3052.1.16.2.1	ScalaripNewStatic	read-write	mandatory	1=static, 0=dynamic. write requires private community name.
1.3.6.1.4.1.3052.1.16.2.2	ScalaripNewAddress	read-write	mandatory	read=current new address, write requires private community name.
1.3.6.1.4.1.3052.1.16.2.3	ScalaripNewSubnetMask	read-write	mandatory	read=current new subnet mask, write requires private community name.
1.3.6.1.4.1.3052.1.16.2.4	ScalaripNewDefaultRouter	read-write	mandatory	read=current new default router, write requires private community name.
1.3.6.1.4.1.3052.1.16.2.5	ScalaripNewSetup	read-write	mandatory	read=0. write requires private community name. any write causes the current object values for ipNewStatic, ipNewAddress, ipNewSubnetMask and ipNewDefaultRouter…
1.3.6.1.4.1.3052.1.17	Nodepppsetup
1.3.6.1.4.1.3052.1.17.1	NodepppIdentification
1.3.6.1.4.1.3052.1.17.1.1	ScalarpppIDString	read-write	mandatory	sent in ppp up trap to provide host identification string
1.3.6.1.4.1.3052.1.17.1.2	ScalarpppIPAddress	read-only	mandatory	sent in ppp up trap to provide host identification by IP address
1.3.6.1.4.1.3052.1.18	Nodeccode
1.3.6.1.4.1.3052.1.18.1	ScalarccodeLoaded	read-only	mandatory	0/1, no/yes, is ccode loaded
1.3.6.1.4.1.3052.1.18.2	ScalarccodeRunning	read-only	mandatory	0/1, no/yes, is ccode running
1.3.6.1.4.1.3052.1.18.3	ScalarccodeStackMainWas	read-only	mandatory	# of bytes of stack used by main app, last time run
1.3.6.1.4.1.3052.1.18.4	ScalarccodeStackMainNow	read-only	mandatory	# of bytes of stack used by main app, this time run
1.3.6.1.4.1.3052.1.18.5	ScalarccodeStackT2Was	read-only	mandatory	# of bytes of stack used by 2nd task of app, last time run
1.3.6.1.4.1.3052.1.18.6	ScalarccodeStackT2Was2	read-only	mandatory	# of bytes of stack used by 2nd task of app, this time run
1.3.6.1.4.1.3052.1.99	Nodetechsupport
1.3.6.1.4.1.3052.1.99.1	ScalartechsupportInt1	read-write	mandatory	a debugging integer for technical support use only. Do not use
1.3.6.1.4.1.3052.1.99.2	ScalartechsupportInt2	read-write	mandatory	a debugging integer for technical support use only. Do not use
1.3.6.1.4.1.3052.1.99.3	ScalartechsupportInt3	read-write	mandatory	a debugging integer for technical support use only. Do not use
1.3.6.1.4.1.3052.1.99.4	ScalartechsupportInt4	read-write	mandatory	a debugging integer for technical support use only. Do not use
1.3.6.1.4.1.3052.1.99.5	ScalartechsupportInt5	read-write	mandatory	a debugging integer for technical support use only. Do not use
1.3.6.1.4.1.3052.501	NodedatalinkDbasePfullTrap			The datalinkDbasePfullTrap is issued when the database reaches a pre-determined threshold level, which causes a trap.
1.3.6.1.4.1.3052.502	NodedatalinkFilePfullTrap			The datalinkFilePfullTrap is issued when one of the data files reaches a pre-determined threshold level, which causes a trap.
1.3.6.1.4.1.3052.503	NodedatalinkDataAlarmTrap			The datalinkDataAlarmTrap is issued when one of the data alarms reaches a pre-determined threshold level, which causes a trap.
1.3.6.1.4.1.3052.504	NodedatalinkSensorAlarmTrap			The datalinkSensorAlarmTrap is issued when one of the External Sensors is triggered for a pre-determined threshold amount of time, which causes a trap.
1.3.6.1.4.1.3052.505	NodedatalinkNoDataAlarmTrap			The datalinkNoDataAlarmTrap is issued when one of the ports receives no input data for a pre-determined threshold amount of time, which causes a trap.
1.3.6.1.4.1.3052.506	NodedatalinkSchedTrap			The datalinkSchedTrap is issued when a scheduled event causes a trap.
1.3.6.1.4.1.3052.507	NodedatalinkImmediateTrap			The datalinkImmediateTrap is issued when the dotrap command is used to issue a test trap to all snmp managers
1.3.6.1.4.1.3052.509	NodedatalinkPPPupTrap			The datalinkPPPupTrap is issued when the PPP interface is brought up and the ppp connection has been established

MIB Viewer

What's a MIB?

What's SNMP?

What's an OID?

SNMP Fundamentals

Using net-snmp

Configuring SNMP on Cisco devices

Configuring SNMP on Fortinet devices

Understanding MIBs

Troubleshooting SNMP

Searching OIDs

Modem/MTA bootfiles

DOCSIS Monitoring

Linux snmpd passthrough

DATALINK-MIB

Bulk Translate

Search Vendor MIBs

Search Vendor Traps