DATASMART-MIB
413 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises Gauge IpAddress TimeTicks |
| RFC1213-MIB | -- DisplayString -- -- ifIndex ifDescr -- |
| RFC1406-MIB | -- dsx1LineStatus dsx1CurrentESs dsx1CurrentUASs -- |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.181.2.2 | Nodedatasmart | |||
| 1.3.6.1.4.1.181.2.2.1 | NodedsSs | |||
| 1.3.6.1.4.1.181.2.2.1.1 | ScalardsSsAlarmSource | read-only | mandatory | If the alarm is occuring on a port, this object states which port. |
| 1.3.6.1.4.1.181.2.2.1.2 | ScalardsSsAlarmState | read-only | mandatory | The alarm state the system is currently in. |
| 1.3.6.1.4.1.181.2.2.1.3 | ScalardsSsLoopback | read-only | mandatory | The loopback the system is currently performing. |
| 1.3.6.1.4.1.181.2.2.1.4 | ScalardsSsPowerStatus | read-only | mandatory | The status of the A and B power inputs on the universal shelf. The possible values are: VALUE DESCRIPTION ssBothOff(1) A off, B off ssAOnBOff(2) A on, B off ss… |
| 1.3.6.1.4.1.181.2.2.2 | NodedsRp | |||
| 1.3.6.1.4.1.181.2.2.2.1 | NodedsRpUsr | |||
| 1.3.6.1.4.1.181.2.2.2.1.1 | TabledsRpUsrTmCntTable | not-accessible | mandatory | The User Time Counts Table. This table contains information about the number of seconds in the current 15-minute interval, the number of complete 15-minute int… |
| 1.3.6.1.4.1.181.2.2.2.1.1.1 | RowdsRpUsrTmCntEntry | not-accessible | mandatory | An entry in the User Time Counts Table. |
| 1.3.6.1.4.1.181.2.2.2.1.1.1.1 | ColumndsRpUsrTmCntIndex | read-only | mandatory | The index to the User Time Counts Table. The valid indices are: VALUE DESCRIPTION 1 Network Interface 2 Terminal Interface 3 Far End Network Interface |
| 1.3.6.1.4.1.181.2.2.2.1.1.1.2 | ColumndsRpUsrTmCntSecs | read-only | mandatory | The number of seconds in the current 15-minute interval. |
| 1.3.6.1.4.1.181.2.2.2.1.1.1.3 | ColumndsRpUsrTmCnt15Mins | read-only | mandatory | The number of completed 15-minute intervals in the Interval Table. |
| 1.3.6.1.4.1.181.2.2.2.1.1.1.4 | ColumndsRpUsrTmCntDays | read-only | mandatory | The number of completed days in the Day Table. |
| 1.3.6.1.4.1.181.2.2.2.1.2 | TabledsRpUsrCurTable | not-accessible | mandatory | The User Current Table. This table contains performance information from the current 15-minute interval for the Network, Terminal, and Far End Network Interfac… |
| 1.3.6.1.4.1.181.2.2.2.1.2.1 | RowdsRpUsrCurEntry | not-accessible | mandatory | An entry in the User Current Table. |
| 1.3.6.1.4.1.181.2.2.2.1.2.1.1 | ColumndsRpUsrCurIndex | read-only | mandatory | The index for the User Current Table. The valid values for this index are: VALUE DESCRIPTION 1 Network Interface 2 Terminal Interface 3 Far End Network Interfa… |
| 1.3.6.1.4.1.181.2.2.2.1.2.1.2 | ColumndsRpUsrCurEE | read-only | mandatory | The number of Event Errors encountered by a DS1/E1 interface in the current 15-minute interval. |
| 1.3.6.1.4.1.181.2.2.2.1.2.1.3 | ColumndsRpUsrCurES | read-only | mandatory | The number of Errored Seconds encountered by a DS1/E1 interface in the current 15-minute interval. |
| 1.3.6.1.4.1.181.2.2.2.1.2.1.4 | ColumndsRpUsrCurBES | read-only | mandatory | The number of Bursty Errored Seconds encountered by a DS1/E1 interface in the current 15-minute interval. |
| 1.3.6.1.4.1.181.2.2.2.1.2.1.5 | ColumndsRpUsrCurSES | read-only | mandatory | The number of Severely Srrored Seconds encountered by a DS1/E1 intervace in the current 15-minute interval. |
| 1.3.6.1.4.1.181.2.2.2.1.2.1.6 | ColumndsRpUsrCurUAS | read-only | mandatory | The number of Unavailable Seconds encountered by a DS1/E1 interface in the current 15-minute interval. |
| 1.3.6.1.4.1.181.2.2.2.1.2.1.7 | ColumndsRpUsrCurCSS | read-only | mandatory | The number of Controlled Slip Seconds encountered by a DS1/E1 interface in the current 15-minute interval. |
| 1.3.6.1.4.1.181.2.2.2.1.2.1.8 | ColumndsRpUsrCurDM | read-only | mandatory | The number of Degraded Minutes encountered by a DS1/E1 interface in the current 15-minute interval. |
| 1.3.6.1.4.1.181.2.2.2.1.2.1.9 | ColumndsRpUsrCurStatus | read-only | mandatory | The error conditions encountered by a DS1/E1 interface in the current 15-minute interval. The error conditions are signified by a single character. The possibl… |
| 1.3.6.1.4.1.181.2.2.2.1.3 | TabledsRpUsrIntvlTable | not-accessible | mandatory | The User Interval Table. This table contains performance information for the past 24 hours, broken down by 15-minute intervals for the Network, Terminal, and F… |
| 1.3.6.1.4.1.181.2.2.2.1.3.1 | RowdsRpUsrIntvlEntry | not-accessible | mandatory | An entry in the User Interval Table. |
| 1.3.6.1.4.1.181.2.2.2.1.3.1.1 | ColumndsRpUsrIntvlIndex | read-only | mandatory | The index for the User Interval Table. The valid values for this index are: VALUE DESCRIPTION 1 Network Interface 2 Terminal Interface 3 Far End Network Interf… |
| 1.3.6.1.4.1.181.2.2.2.1.3.1.2 | ColumndsRpUsrIntvlNum | read-only | mandatory | This is the interval number of the User Interval Table. It will be the number of completed 15-minute intervals since the unit has been powered up. After 24 hou… |
| 1.3.6.1.4.1.181.2.2.2.1.3.1.3 | ColumndsRpUsrIntvlEE | read-only | mandatory | The number of Event Errors encountered by a DS1/E1 interface in one of the previous 96 15-minute intervals. |
| 1.3.6.1.4.1.181.2.2.2.1.3.1.4 | ColumndsRpUsrIntvlES | read-only | mandatory | The number of Errored Seconds encountered by a DS1/E1 interface in one of the previous 96 15-minute intervals. |
| 1.3.6.1.4.1.181.2.2.2.1.3.1.5 | ColumndsRpUsrIntvlBES | read-only | mandatory | The number of Bursty Errored Seconds encountered by a DS1/E1 interface in one of the pervious 96 15-minute intervals. |
| 1.3.6.1.4.1.181.2.2.2.1.3.1.6 | ColumndsRpUsrIntvlSES | read-only | mandatory | The number of Severely Errored Seconds encountered by a DS1/E1 interface in one of the previous 96 15-minute intervals. |
| 1.3.6.1.4.1.181.2.2.2.1.3.1.7 | ColumndsRpUsrIntvlUAS | read-only | mandatory | The number of Unavailable Seconds encountered by a DS1/E1 interface in one of the previous 96 15-minute intervals. |
| 1.3.6.1.4.1.181.2.2.2.1.3.1.8 | ColumndsRpUsrIntvlCSS | read-only | mandatory | The number of Controlled Slip Seconds encountered by a DS1/E1 interface in one of the previous 96 15-minute intervals. |
| 1.3.6.1.4.1.181.2.2.2.1.3.1.9 | ColumndsRpUsrIntvlDM | read-only | mandatory | The number of Degraded Minutes encountered by a DS1/E1 interface in one of the previous 96 15-minute intervals. |
| 1.3.6.1.4.1.181.2.2.2.1.3.1.10 | ColumndsRpUsrIntvlStatus | read-only | mandatory | The error conditions encountered by a DS1/E1 interface in one of the pervious 96 15-minute intervals. The error conditions are signified by a single character.… |
| 1.3.6.1.4.1.181.2.2.2.1.4 | TabledsRpUsrTotalTable | not-accessible | mandatory | The User Total Table. This table contains performance information for the past 24-hours, for the Network, Terminal, and Far End Network Interfaces. This is a r… |
| 1.3.6.1.4.1.181.2.2.2.1.4.1 | RowdsRpUsrTotalEntry | not-accessible | mandatory | An entry in the User Total Table. |
| 1.3.6.1.4.1.181.2.2.2.1.4.1.1 | ColumndsRpUsrTotalIndex | read-only | mandatory | The index for the User Total Table. The valid indices are: VALUE DESCRIPTION 1 Network Interface 2 Terminal Interface 3 Far End Network Interface |
| 1.3.6.1.4.1.181.2.2.2.1.4.1.2 | ColumndsRpUsrTotalEE | read-only | mandatory | The number of Event Errors encountered by a DS1/E1 interface in the past 24-hours. |
| 1.3.6.1.4.1.181.2.2.2.1.4.1.3 | ColumndsRpUsrTotalES | read-only | mandatory | The number of Errored Seconds encountered by a DS1/E1 interface in the past 24-hours. |
| 1.3.6.1.4.1.181.2.2.2.1.4.1.4 | ColumndsRpUsrTotalBES | read-only | mandatory | The number of Bursty Errored Seconds encountered by a DS1/E1 interface in the past 24-hours. |
| 1.3.6.1.4.1.181.2.2.2.1.4.1.5 | ColumndsRpUsrTotalSES | read-only | mandatory | The number of Severely Errored Seconds encountered by a DS1/E1 interface in the past 24-hours. |
| 1.3.6.1.4.1.181.2.2.2.1.4.1.6 | ColumndsRpUsrTotalUAS | read-only | mandatory | The number of Unavailable Seconds encountered by a DS1/E1 interface in the past 24-hours. |
| 1.3.6.1.4.1.181.2.2.2.1.4.1.7 | ColumndsRpUsrTotalCSS | read-only | mandatory | The number of Controlled Slip Seconds encountered by a DS1/E1 interface in the past 24-hours. |
| 1.3.6.1.4.1.181.2.2.2.1.4.1.8 | ColumndsRpUsrTotalDM | read-only | mandatory | The number of Degraded Minutes encountered by a DS1/E1 interface in the past 24-hours. |
| 1.3.6.1.4.1.181.2.2.2.1.4.1.9 | ColumndsRpUsrTotalStatus | read-only | mandatory | The error conditions encountered by a DS1/E1 interface in the past 24-hours. The error conditions are signified by a single character. The possible values are:… |
| 1.3.6.1.4.1.181.2.2.2.1.5 | TabledsRpUsrDayTable | not-accessible | mandatory | After the unit has been powered up for 24 hours, the values from the User Total Table are moved into the first slot in the User Day Table. There are seven entr… |
| 1.3.6.1.4.1.181.2.2.2.1.5.1 | RowdsRpUsrDayEntry | not-accessible | mandatory | This is an entry in the User Day Table. |
| 1.3.6.1.4.1.181.2.2.2.1.5.1.1 | ColumndsRpUsrDayIndex | read-only | mandatory | The User Day Table interface index. The valid indices are: VALUE DESCRIPTION 1 Network Interface 2 Terminal Interface 3 Far End Network Interface |
| 1.3.6.1.4.1.181.2.2.2.1.5.1.2 | ColumndsRpUsrDayNum | read-only | mandatory | The User Day Table day index. The valid values are 1 day to 7 days. |
| 1.3.6.1.4.1.181.2.2.2.1.5.1.3 | ColumndsRpUsrDayEE | read-only | mandatory | The number of Event Errors encountered by a DS1/E1 interface in one of the previous days. |
| 1.3.6.1.4.1.181.2.2.2.1.5.1.4 | ColumndsRpUsrDayES | read-only | mandatory | The number of Errored Seconds encountered by a DS1/E1 interface in one of the previous days. |
| 1.3.6.1.4.1.181.2.2.2.1.5.1.5 | ColumndsRpUsrDayBES | read-only | mandatory | The number of Bursty Errored Seconds encountered by a DS1/E1 interface in one of the previous days. |
| 1.3.6.1.4.1.181.2.2.2.1.5.1.6 | ColumndsRpUsrDaySES | read-only | mandatory | The number of Severely Errored Seconds encountered by a DS1/E1 interface in one of the previous days. |
| 1.3.6.1.4.1.181.2.2.2.1.5.1.7 | ColumndsRpUsrDayUAS | read-only | mandatory | The number of Unavailable Seconds encountered by a DS1/E1 interface in one of the previous days. |
| 1.3.6.1.4.1.181.2.2.2.1.5.1.8 | ColumndsRpUsrDayCSS | read-only | mandatory | The number of Controlled Slip Seconds encountered by a DS1/E1 interface in one of the previous days. |
| 1.3.6.1.4.1.181.2.2.2.1.5.1.9 | ColumndsRpUsrDayDM | read-only | mandatory | The number of Degraded Minutes encountered by a DS1/E1 interface in one of the previous days. |
| 1.3.6.1.4.1.181.2.2.2.1.5.1.10 | ColumndsRpUsrDayStatus | read-only | mandatory | The error conditions encountered by a DS1/E1 interface in one of the previous days. The error conditions are signified by a single character. The possible valu… |
| 1.3.6.1.4.1.181.2.2.2.2 | NodedsRpCar | |||
| 1.3.6.1.4.1.181.2.2.2.2.1 | ScalardsRpCarCntSecs | read-only | mandatory | The number of seconds that have elapsed in the current interval. |
| 1.3.6.1.4.1.181.2.2.2.2.2 | ScalardsRpCarCnt15Mins | read-only | mandatory | The number of 15-minute intervals that have elapsed in the current 24-hours. |
| 1.3.6.1.4.1.181.2.2.2.2.3 | NodedsRpCarCur | |||
| 1.3.6.1.4.1.181.2.2.2.2.3.1 | ScalardsRpCarCurEE | read-only | mandatory | The number of Event Errors encountered by the Network Interface in the current 15-minute interval. |
| 1.3.6.1.4.1.181.2.2.2.2.3.2 | ScalardsRpCarCurES | read-only | mandatory | The number of Errored Seconds encountered by the Network Interface in the current 15-minute interval. |
| 1.3.6.1.4.1.181.2.2.2.2.3.3 | ScalardsRpCarCurBES | read-only | mandatory | The number of Bursty Errored Seconds encountered by the Network Interface in the current 15-minute interval. |
| 1.3.6.1.4.1.181.2.2.2.2.3.4 | ScalardsRpCarCurSES | read-only | mandatory | The number of Severely Errored Seconds encountered by the Network Interface in the current 15-minute interval. |
| 1.3.6.1.4.1.181.2.2.2.2.3.5 | ScalardsRpCarCurUAS | read-only | mandatory | The number of Unavailable Seconds encountered by the Network Interface in the current 15-minute interval. |
| 1.3.6.1.4.1.181.2.2.2.2.3.6 | ScalardsRpCarCurCSS | read-only | mandatory | The number of Controlled Slip Seconds encountered by the Network Interface in the current 15-minute interval. |
| 1.3.6.1.4.1.181.2.2.2.2.3.7 | ScalardsRpCarCurLOFC | read-only | mandatory | The Loss of Frame Count for the Network Interface in the current 15-minute interval. |
| 1.3.6.1.4.1.181.2.2.2.2.4 | TabledsRpCarIntvlTable | not-accessible | mandatory | This is the Carrier Interval Table. This table contains performance information about the Network Interface. |
| 1.3.6.1.4.1.181.2.2.2.2.4.1 | RowdsRpCarIntvlEntry | not-accessible | mandatory | This is an entry in the Carrier Interval Table. |
| 1.3.6.1.4.1.181.2.2.2.2.4.1.1 | ColumndsRpCarIntvlNum | read-only | mandatory | The number of the 15-minute interval (1-96) from the previous 24-hour period. 1 is the most recent. |
| 1.3.6.1.4.1.181.2.2.2.2.4.1.2 | ColumndsRpCarIntvlEE | read-only | mandatory | The number of Event Errors encountered by the Network Interface in one of the previous 96 15-minute intervals. |
| 1.3.6.1.4.1.181.2.2.2.2.4.1.3 | ColumndsRpCarIntvlES | read-only | mandatory | The number of Errored Seconds encountered by the Network Interface in one of the previous 96 15-minute intervals. |
| 1.3.6.1.4.1.181.2.2.2.2.4.1.4 | ColumndsRpCarIntvlBES | read-only | mandatory | The number of Bursty Errored Seconds encountered by the Network Interface in one of the previous 96 15-minute intervals. |
| 1.3.6.1.4.1.181.2.2.2.2.4.1.5 | ColumndsRpCarIntvlSES | read-only | mandatory | The number of Severely Errored Seconds encountered by the Network Interface in one of the previous 96 15-minute intervals. |
| 1.3.6.1.4.1.181.2.2.2.2.4.1.6 | ColumndsRpCarIntvlUAS | read-only | mandatory | The number of Unavailable Seconds encountered by the Network Interface in one of the previous 96 15-minute intervals. |
| 1.3.6.1.4.1.181.2.2.2.2.4.1.7 | ColumndsRpCarIntvlCSS | read-only | mandatory | The number of Controlled Slip Seconds encountered by the Network Interface in one of the previous 96 15-minute intervals. |
| 1.3.6.1.4.1.181.2.2.2.2.4.1.8 | ColumndsRpCarIntvlLOFC | read-only | mandatory | The Loss of Frame Count fo the Network Interface for one of the previous 96 15-minute intervals. |
| 1.3.6.1.4.1.181.2.2.2.2.5 | NodedsRpCarTotal | |||
| 1.3.6.1.4.1.181.2.2.2.2.5.1 | ScalardsRpCarTotalEE | read-only | mandatory | The number of Errored Events encountered by the Network Interface in the past 24-hours. |
| 1.3.6.1.4.1.181.2.2.2.2.5.2 | ScalardsRpCarTotalES | read-only | mandatory | The number of Errored Seconds encountered by the Network Interface in the past 24-hours. |
| 1.3.6.1.4.1.181.2.2.2.2.5.3 | ScalardsRpCarTotalBES | read-only | mandatory | The number of Bursty Errored Seconds encountered by the Network Interface in the past 24-hours. |
| 1.3.6.1.4.1.181.2.2.2.2.5.4 | ScalardsRpCarTotalSES | read-only | mandatory | The number of Severely Errored Seconds encountered by the Network Interface in the past 24-hours. |
| 1.3.6.1.4.1.181.2.2.2.2.5.5 | ScalardsRpCarTotalUAS | read-only | mandatory | The number of Unavailable Seconds encountered by the Network Interface in the past 24-hours. |
| 1.3.6.1.4.1.181.2.2.2.2.5.6 | ScalardsRpCarTotalCSS | read-only | mandatory | The number of Controlled Slip Seconds encountered by the Network Interface in the past 24-hours. |
| 1.3.6.1.4.1.181.2.2.2.2.5.7 | ScalardsRpCarTotalLOFC | read-only | mandatory | The Loss of Frame Count for the Network Interface for one of the previous 96 15-minute intervals. |
| 1.3.6.1.4.1.181.2.2.2.3 | NodedsRpStat | |||
| 1.3.6.1.4.1.181.2.2.2.3.1 | TabledsRpStTable | not-accessible | mandatory | The Statistics Table. This table consists of statistical error counts of various DS1/E1 line conditions. These counts are maintained between power-cycles. |
| 1.3.6.1.4.1.181.2.2.2.3.1.1 | RowdsRpStEntry | not-accessible | mandatory | An entry in the Statistics Table. |
| 1.3.6.1.4.1.181.2.2.2.3.1.1.1 | ColumndsRpStIndex | read-only | mandatory | The index into the Statistics Table. The valid indices are: VALUE DESCRIPTION 1 Network Interface 2 Terminal Interface 3 Far End Network Interface |
| 1.3.6.1.4.1.181.2.2.2.3.1.1.2 | ColumndsRpStEsfErrors | read-only | mandatory | The total number of Error Free Seconds since the counters have last been cleared. |
| 1.3.6.1.4.1.181.2.2.2.3.1.1.3 | ColumndsRpStCrcErrors | read-only | mandatory | The total number of CRC errors since the counters have last been cleared. |
| 1.3.6.1.4.1.181.2.2.2.3.1.1.4 | ColumndsRpStOofErrors | read-only | mandatory | The total number of Out Of Frame errors since the counters have last been cleared. |
| 1.3.6.1.4.1.181.2.2.2.3.1.1.5 | ColumndsRpStFrameBitErrors | read-only | mandatory | The total number of Frame Bit errors since the counters have last been cleared. |
| 1.3.6.1.4.1.181.2.2.2.3.1.1.6 | ColumndsRpStBPVs | read-only | mandatory | The total number of Bipolar Violations since the counters have last been cleared. |
| 1.3.6.1.4.1.181.2.2.2.3.1.1.7 | ColumndsRpStControlledSlips | read-only | mandatory | The total number of Controlled Slips since the counters have last been cleared. |
| 1.3.6.1.4.1.181.2.2.2.3.1.1.8 | ColumndsRpStYellowEvents | read-only | mandatory | The total number of Yellow Events since the counters have last been cleared. |
| 1.3.6.1.4.1.181.2.2.2.3.1.1.9 | ColumndsRpStAISEvents | read-only | mandatory | The total number of Alarm Indication Siganl events since the counters have last been cleared. |
| 1.3.6.1.4.1.181.2.2.2.3.1.1.10 | ColumndsRpStLOFEvents | read-only | mandatory | The total number of Loss of Frame events since the counters have last been cleared. |
| 1.3.6.1.4.1.181.2.2.2.3.1.1.11 | ColumndsRpStLOSEvents | read-only | mandatory | The total number of Loss of Signal events since the counters have last been cleared. |
| 1.3.6.1.4.1.181.2.2.2.3.1.1.12 | ColumndsRpStFarEndBlkErrors | read-only | mandatory | The total number of Far End Block Errors since the counters were last cleared. |
| 1.3.6.1.4.1.181.2.2.2.3.1.1.13 | ColumndsRpStRemFrameAlmEvts | read-only | mandatory | The total number of Remote Frame Alarm events since the counters were last cleared. |
| 1.3.6.1.4.1.181.2.2.2.3.1.1.14 | ColumndsRpStRemMFrameAlmEvts | read-only | mandatory | The total number of Remote MultiFrame Alarm events since the counters were last cleared. |
| 1.3.6.1.4.1.181.2.2.2.3.1.1.15 | ColumndsRpStLOTS16MFrameEvts | read-only | mandatory | The total number of Loss of TS16MultiFrame events since the counters have been cleared. |
| 1.3.6.1.4.1.181.2.2.2.3.1.1.16 | ColumndsRpStZeroCounters | read-write | mandatory | This object will clear the Statistics Table counters when it is set to rpStZeroCounterStart(2). Once the counters have been cleraed, it will return to its norm… |
| 1.3.6.1.4.1.181.2.2.2.4 | NodedsRpPl | |||
| 1.3.6.1.4.1.181.2.2.2.4.1 | ScalardsPlBreak | read-write | mandatory | This object determines if the user interface uses page breaks or 'more' prompts when displaying information which is longer than the defined page length (e.g.,… |
| 1.3.6.1.4.1.181.2.2.2.4.2 | ScalardsPlLen | read-write | mandatory | The length of a 'page' of information. When the set number of lines have been displayed, a 'more' prompt or linefeed will be inserted (defined by dsPlBreak). A… |
| 1.3.6.1.4.1.181.2.2.2.5 | TabledsRpAhrTable | not-accessible | mandatory | This is the Alarm History Table. It contains the text messages of the last 20 alarms. |
| 1.3.6.1.4.1.181.2.2.2.5.1 | RowdsRpAhrEntry | not-accessible | mandatory | An entry in the Alarm History Table. |
| 1.3.6.1.4.1.181.2.2.2.5.1.1 | ColumndsRpAhrIndex | read-only | mandatory | The Alarm History Table index. Index 1 is the most recent alarm. |
| 1.3.6.1.4.1.181.2.2.2.5.1.2 | ColumndsRpAhrStr | read-only | mandatory | The alarm message in USER format. |
| 1.3.6.1.4.1.181.2.2.2.6 | TabledsRpShrTable | not-accessible | mandatory | This is the Security History Report table. It contains entries for events which are considered important from a security standpoint. Examples of such events ar… |
| 1.3.6.1.4.1.181.2.2.2.6.1 | RowdsRpShrEntry | not-accessible | mandatory | An entry in the Security History Report table. |
| 1.3.6.1.4.1.181.2.2.2.6.1.1 | ColumndsRpShrIndex | read-only | mandatory | The Security History Report table index. Events are in chronological order. This number ranges between 1 and the value of dsRpShrNumber. Index 1 is the most re… |
| 1.3.6.1.4.1.181.2.2.2.6.1.2 | ColumndsRpShrDateTime | read-only | mandatory | Display string showing date & time that the security related event occurred. |
| 1.3.6.1.4.1.181.2.2.2.6.1.3 | ColumndsRpShrEventType | read-only | mandatory | Shows what type of security related event occurred. VALUE DESCRIPTION rpShrTelnetPassword (1) - Incorrect Telnet password entered rpShrSrcIpAddressScreen (2) -… |
| 1.3.6.1.4.1.181.2.2.2.6.1.4 | ColumndsRpShrComments | read-only | mandatory | Display string showing additional information specific to the type of event. For example, for events of type rpShrTelnetPassword, the IP address of the remote … |
| 1.3.6.1.4.1.181.2.2.2.7 | ScalardsRpBes | read-write | mandatory | The error threshold for Bursty Errored Seconds. |
| 1.3.6.1.4.1.181.2.2.2.8 | ScalardsRpSes | read-write | mandatory | The threshold for Severely Errored Seconds. |
| 1.3.6.1.4.1.181.2.2.2.9 | ScalardsRpDm | read-write | mandatory | The threshold for Degraded Minutes. |
| 1.3.6.1.4.1.181.2.2.2.10 | NodedsRpFr | |||
| 1.3.6.1.4.1.181.2.2.2.10.1 | TabledsRpFrTmCntTable | not-accessible | mandatory | The FRIB Time Counts Table. This table contains information for the number of seconds in the current 2-hour interval, the number of complete 2-hour intervals i… |
| 1.3.6.1.4.1.181.2.2.2.10.1.1 | RowdsRpFrTmCntEntry | not-accessible | mandatory | An entry in the FRIB Time Counts Table. |
| 1.3.6.1.4.1.181.2.2.2.10.1.1.1 | ColumndsRpFrTmCntDir | read-only | mandatory | The direction index to the FRIB Time Counts Table. The valid indices are: VALUE DESCRIPTION 1 Transmit 2 Receive |
| 1.3.6.1.4.1.181.2.2.2.10.1.1.2 | ColumndsRpFrTmCntSecs | read-only | mandatory | The number of seconds in the current 2-hour interval. |
| 1.3.6.1.4.1.181.2.2.2.10.1.1.3 | ColumndsRpFrTmCnt2Hrs | read-only | mandatory | The number of completed 2-hour intervals in the Interval Table. |
| 1.3.6.1.4.1.181.2.2.2.10.1.1.4 | ColumndsRpFrTmCntDays | read-only | mandatory | The number of completed days in the Day Table. |
| 1.3.6.1.4.1.181.2.2.2.10.2 | TabledsRpFrPre15MTable | not-accessible | mandatory | The FRIB Previous 15 Min Table. This table contains performance information from the previous 15-minute interval for both the transmit and receive directions o… |
| 1.3.6.1.4.1.181.2.2.2.10.2.1 | RowdsRpFrPre15MEntry | not-accessible | mandatory | An entry in the FRIB Previous 15 Min Table. |
| 1.3.6.1.4.1.181.2.2.2.10.2.1.1 | ColumndsRpFrPre15MDir | read-only | mandatory | The direction index to the FRIB Previous 15 Min Table. VALUE DESCRIPTION 1 Transmit 2 Receive |
| 1.3.6.1.4.1.181.2.2.2.10.2.1.2 | ColumndsRpFrPre15MVcIndex | read-only | mandatory | The VC index to the FRIB Previous 15 Min Table. The table has 64 entries for indiviual VCs, a value of 1 through 64, and 1 entry for all other VCs, a value of … |
| 1.3.6.1.4.1.181.2.2.2.10.2.1.3 | ColumndsRpFrPre15MVc | read-only | mandatory | The VC for this entry in the FRIB Previous 15 Min Table. |
| 1.3.6.1.4.1.181.2.2.2.10.2.1.4 | ColumndsRpFrPre15MFrames | read-only | mandatory | The number of Frame Relay packets transmitted or received during the previous 15-minute interval. |
| 1.3.6.1.4.1.181.2.2.2.10.2.1.5 | ColumndsRpFrPre15MOctets | read-only | mandatory | The number of octets transmitted or received during the previous 15-minute interval. |
| 1.3.6.1.4.1.181.2.2.2.10.2.1.6 | ColumndsRpFrPre15MKbps | read-only | mandatory | The Kilobit/sec rate for data transmitted or received during the previous 15-minute interval. |
| 1.3.6.1.4.1.181.2.2.2.10.2.1.7 | ColumndsRpFrPre15MFpMax | read-only | mandatory | The maximum FPING roundtrip time (in msec) of all FPINGs on this VC during the previous 15-minute interval. |
| 1.3.6.1.4.1.181.2.2.2.10.2.1.8 | ColumndsRpFrPre15MFpAvg | read-only | mandatory | The average FPING roundtrip time (in msec) of all FPINGs on this VC during the previous 15-minute interval. |
| 1.3.6.1.4.1.181.2.2.2.10.2.1.9 | ColumndsRpFrPre15MFpLost | read-only | mandatory | The number of FPINGs responses that were not returned on this VC during the previous 15-minute interval. |
| 1.3.6.1.4.1.181.2.2.2.10.2.1.10 | ColumndsRpFrPre15MFpSent | read-only | mandatory | The number of FPINGs transmitted on this VC during the previous 15-minute interval. |
| 1.3.6.1.4.1.181.2.2.2.10.2.1.11 | ColumndsRpFrPre15MStatus | read-only | mandatory | The status summary of this VC during the previous 15-minute interval: VALUE DESCRIPTION U VC link is UP D VC link is DOWN B At least one frame had the BECN bit… |
| 1.3.6.1.4.1.181.2.2.2.10.3 | TabledsRpFrCur15MTable | not-accessible | mandatory | The FRIB Current 15 Min Table. This table contains performance information from the current 15-minute interval for both the transmit and receive directions of … |
| 1.3.6.1.4.1.181.2.2.2.10.3.1 | RowdsRpFrCur15MEntry | not-accessible | mandatory | An entry in the FRIB Current 15 Min Table. |
| 1.3.6.1.4.1.181.2.2.2.10.3.1.1 | ColumndsRpFrCur15MDir | read-only | mandatory | The direction index to the FRIB Current 15 Min Table. VALUE DESCRIPTION 1 Transmit 2 Receive |
| 1.3.6.1.4.1.181.2.2.2.10.3.1.2 | ColumndsRpFrCur15MVcIndex | read-only | mandatory | The VC index to the FRIB Current 15 Min Table. The table has 64 entries for indiviual VCs and the 65th entry for all other VCs including errored frames. |
| 1.3.6.1.4.1.181.2.2.2.10.3.1.3 | ColumndsRpFrCur15MVc | read-only | mandatory | The VC for this entry in the FRIB Current 15 Min Table. |
| 1.3.6.1.4.1.181.2.2.2.10.3.1.4 | ColumndsRpFrCur15MFrames | read-only | mandatory | The number of Frame Relay packets transmitted or received during the current 15-minute interval. |
| 1.3.6.1.4.1.181.2.2.2.10.3.1.5 | ColumndsRpFrCur15MOctets | read-only | mandatory | The number of octets transmitted or received during the current 15-minute interval. |
| 1.3.6.1.4.1.181.2.2.2.10.3.1.6 | ColumndsRpFrCur15MKbps | read-only | mandatory | The Kilobit/sec rate for data transmitted or received during the current 15-minute interval. |
| 1.3.6.1.4.1.181.2.2.2.10.3.1.7 | ColumndsRpFrCur15MFpMax | read-only | mandatory | The maximum FPING roundtrip time (in msec) of all FPINGs on this VC during the current 15-minute interval. |
| 1.3.6.1.4.1.181.2.2.2.10.3.1.8 | ColumndsRpFrCur15MFpAvg | read-only | mandatory | The average FPING roundtrip time (in msec) of all FPINGs on this VC during the current 15-minute interval. |
| 1.3.6.1.4.1.181.2.2.2.10.3.1.9 | ColumndsRpFrCur15MFpLost | read-only | mandatory | The number of FPINGs responses received on this VC during the current 15-minute interval. |
| 1.3.6.1.4.1.181.2.2.2.10.3.1.10 | ColumndsRpFrCur15MFpSent | read-only | mandatory | The number of FPINGs transmitted on this VC during the current 15-minute interval. |
| 1.3.6.1.4.1.181.2.2.2.10.3.1.11 | ColumndsRpFrCur15MFpRmtIp | read-only | mandatory | The IP Address of the unit at the remote end of the VC. |
| 1.3.6.1.4.1.181.2.2.2.10.3.1.12 | ColumndsRpFrCur15MFpRmtVc | read-only | mandatory | The VC number at the remote end of the VC. |
| 1.3.6.1.4.1.181.2.2.2.10.3.1.13 | ColumndsRpFrCur15MStatus | read-only | mandatory | The status summary of this VC during the current 15-minute interval: VALUE DESCRIPTION U VC link is UP D VC link is DOWN B At least one frame had the BECN bit … |
| 1.3.6.1.4.1.181.2.2.2.10.4 | TabledsRpFrCur2HTable | not-accessible | mandatory | The FRIB Current 2Hr Table. This table contains performance information from the current 2-hour interval for both the transmit and receive directions of each V… |
| 1.3.6.1.4.1.181.2.2.2.10.4.1 | RowdsRpFrCur2HEntry | not-accessible | mandatory | An entry in the FRIB Current 2Hr Table. |
| 1.3.6.1.4.1.181.2.2.2.10.4.1.1 | ColumndsRpFrCur2HDir | read-only | mandatory | The direction index to the FRIB Current 2Hr Table. VALUE DESCRIPTION 1 Transmit 2 Receive |
| 1.3.6.1.4.1.181.2.2.2.10.4.1.2 | ColumndsRpFrCur2HVcIndex | read-only | mandatory | The VC index to the FRIB Current 2Hr Table. The table has 64 entries for indiviual VCs and 1 entry for all other VCs. |
| 1.3.6.1.4.1.181.2.2.2.10.4.1.3 | ColumndsRpFrCur2HVc | read-only | mandatory | The VC for this entry in the FRIB Current 2Hr Table. |
| 1.3.6.1.4.1.181.2.2.2.10.4.1.4 | ColumndsRpFrCur2HFrames | read-only | mandatory | The number of Frame Relay packets transmitted or received during the current 2-hour interval. |
| 1.3.6.1.4.1.181.2.2.2.10.4.1.5 | ColumndsRpFrCur2HOctets | read-only | mandatory | The number of octets transmitted or received during the current 2-hour interval. |
| 1.3.6.1.4.1.181.2.2.2.10.4.1.6 | ColumndsRpFrCur2HKbps | read-only | mandatory | The Kilobit/sec rate for data transmitted or received during the current 2-hour interval. |
| 1.3.6.1.4.1.181.2.2.2.10.4.1.7 | ColumndsRpFrCur2HFpMax | read-only | mandatory | The maximum FPING roundtrip time (in msec) of all FPINGs on this VC during the current 2-hour interval. |
| 1.3.6.1.4.1.181.2.2.2.10.4.1.8 | ColumndsRpFrCur2HFpAvg | read-only | mandatory | The average FPING roundtrip time (in msec) of all FPINGs on this VC during the current 2-hour interval. |
| 1.3.6.1.4.1.181.2.2.2.10.4.1.9 | ColumndsRpFrCur2HFpLost | read-only | mandatory | The number of FPINGs responses received on this VC during the current 2-hour interval. |
| 1.3.6.1.4.1.181.2.2.2.10.4.1.10 | ColumndsRpFrCur2HFpSent | read-only | mandatory | The number of FPINGs transmitted on this VC during the current 2-hour interval. |
| 1.3.6.1.4.1.181.2.2.2.10.4.1.11 | ColumndsRpFrCur2HStatus | read-only | mandatory | The status summary of this VC during the current 2-hour interval: VALUE DESCRIPTION U VC link is UP D VC link is DOWN B At least one frame had the BECN bit set… |
| 1.3.6.1.4.1.181.2.2.2.10.5 | TabledsRpFrIntvl2HTable | not-accessible | mandatory | The User 2H Interval Table. This table contains performance information for the past 24 hours, broken down by 2-hour intervals. |
| 1.3.6.1.4.1.181.2.2.2.10.5.1 | RowdsRpFrIntvl2HEntry | not-accessible | mandatory | An entry in the FRIB 2H Interval Table. |
| 1.3.6.1.4.1.181.2.2.2.10.5.1.1 | ColumndsRpFrIntvl2HDir | read-only | mandatory | The direction index to the FRIB 2H Interval Table. VALUE DESCRIPTION 1 Transmit 2 Receive |
| 1.3.6.1.4.1.181.2.2.2.10.5.1.2 | ColumndsRpFrIntvl2HVcIndex | read-only | mandatory | The VC index to the FRIB 2H Interval Table. The table has 64 entries for indiviual VCs and 1 entry for all other VCs. |
| 1.3.6.1.4.1.181.2.2.2.10.5.1.3 | ColumndsRpFrIntvl2HNum | read-only | mandatory | This is the interval number of the FRIB 2H Interval Table. It will be the number of completed 2-hour intervals since the unit has been powered up. After 24 hou… |
| 1.3.6.1.4.1.181.2.2.2.10.5.1.4 | ColumndsRpFrIntvl2HVc | read-only | mandatory | The VC for this entry in the FRIB 2H Interval Table. |
| 1.3.6.1.4.1.181.2.2.2.10.5.1.5 | ColumndsRpFrIntvl2HFrames | read-only | mandatory | The number of Frame Relay packets transmitted or received during one of the previous 12 2-hour intervals. |
| 1.3.6.1.4.1.181.2.2.2.10.5.1.6 | ColumndsRpFrIntvl2HOctets | read-only | mandatory | The number of octets transmitted or received during one of the previous 12 2-hour intervals. |
| 1.3.6.1.4.1.181.2.2.2.10.5.1.7 | ColumndsRpFrIntvl2HKbps | read-only | mandatory | The Kilobit/sec rate for data transmitted or received during one of the previous 12 2-hour intervals. |
| 1.3.6.1.4.1.181.2.2.2.10.5.1.8 | ColumndsRpFrIntvl2HFpMax | read-only | mandatory | The maximum FPING roundtrip time (in msec) of all FPINGs on this VC during one of the previous 12 2-hour intervals. |
| 1.3.6.1.4.1.181.2.2.2.10.5.1.9 | ColumndsRpFrIntvl2HFpAvg | read-only | mandatory | The average FPING roundtrip time (in msec) of all FPINGs on this VC during one of the previous 12 2-hour intervals. |
| 1.3.6.1.4.1.181.2.2.2.10.5.1.10 | ColumndsRpFrIntvl2HFpLost | read-only | mandatory | The number of FPINGs responses received on this VC during one of the previous 12 2-hour intervals. |
| 1.3.6.1.4.1.181.2.2.2.10.5.1.11 | ColumndsRpFrIntvl2HFpSent | read-only | mandatory | The number of FPINGs transmitted on this VC during one of the previous 12 2-hour intervals. |
| 1.3.6.1.4.1.181.2.2.2.10.5.1.12 | ColumndsRpFrIntvl2HStatus | read-only | mandatory | The status summary of this VC during the one of the previous 12 2-hour intervals: VALUE DESCRIPTION U VC link is UP D VC link is DOWN B At least one frame had … |
| 1.3.6.1.4.1.181.2.2.2.10.6 | TabledsRpFrTotalTable | not-accessible | mandatory | The FRIB Total Table. This table contains performance information for the past 24-hours for Frame Relay data being passed throught the NI Interface. This is a … |
| 1.3.6.1.4.1.181.2.2.2.10.6.1 | RowdsRpFrTotalEntry | not-accessible | mandatory | An entry in the FRIB Total Table. |
| 1.3.6.1.4.1.181.2.2.2.10.6.1.1 | ColumndsRpFrTotalDir | read-only | mandatory | The direction index to the FRIB Total Table. VALUE DESCRIPTION 1 Transmit 2 Receive |
| 1.3.6.1.4.1.181.2.2.2.10.6.1.2 | ColumndsRpFrTotalVcIndex | read-only | mandatory | The VC index to the FRIB Total Table. The table has 64 entries for indiviual VCs and 1 entry for all other VCs. |
| 1.3.6.1.4.1.181.2.2.2.10.6.1.3 | ColumndsRpFrTotalVc | read-only | mandatory | The VC for this entry in the FRIB Total Table. |
| 1.3.6.1.4.1.181.2.2.2.10.6.1.4 | ColumndsRpFrTotalFrames | read-only | mandatory | The number of Frame Relay packets transmitted or received during the past 24 hours. |
| 1.3.6.1.4.1.181.2.2.2.10.6.1.5 | ColumndsRpFrTotalOctets | read-only | mandatory | The number of octets transmitted or received during the past 24 hours. |
| 1.3.6.1.4.1.181.2.2.2.10.6.1.6 | ColumndsRpFrTotalKbps | read-only | mandatory | The Kilobit/sec rate for data transmitted or received during the past 24 hours. |
| 1.3.6.1.4.1.181.2.2.2.10.6.1.7 | ColumndsRpFrTotalFpMax | read-only | mandatory | The maximum FPING roundtrip time (in msec) of all FPINGs on this VC during the past 24 hours. |
| 1.3.6.1.4.1.181.2.2.2.10.6.1.8 | ColumndsRpFrTotalFpAvg | read-only | mandatory | The average FPING roundtrip time (in msec) of all FPINGs on this VC during the past 24 hours. |
| 1.3.6.1.4.1.181.2.2.2.10.6.1.9 | ColumndsRpFrTotalFpLost | read-only | mandatory | The number of FPINGs responses received on this VC during the past 24 hours. |
| 1.3.6.1.4.1.181.2.2.2.10.6.1.10 | ColumndsRpFrTotalFpSent | read-only | mandatory | The number of FPINGs transmitted on this VC during the past 24 hours. |
| 1.3.6.1.4.1.181.2.2.2.10.6.1.11 | ColumndsRpFrTotalStatus | read-only | mandatory | The status summary of this VC during the past 24 hours: VALUE DESCRIPTION U VC link is UP D VC link is DOWN B At least one frame had the BECN bit set F At leas… |
| 1.3.6.1.4.1.181.2.2.2.10.7 | TabledsRpFrDayTable | not-accessible | mandatory | After the unit has been powered up for 24 hours, the values from the FRIB Total Table are moved into the first slot in the FRIB Day Table. There are seven entr… |
| 1.3.6.1.4.1.181.2.2.2.10.7.1 | RowdsRpFrDayEntry | not-accessible | mandatory | This is an entry in the FRIB Day Table. |
| 1.3.6.1.4.1.181.2.2.2.10.7.1.1 | ColumndsRpFrDayDir | read-only | mandatory | The direction index to the FRIB Day Table. VALUE DESCRIPTION 1 Transmit 2 Receive |
| 1.3.6.1.4.1.181.2.2.2.10.7.1.2 | ColumndsRpFrDayVcIndex | read-only | mandatory | The VC index to the FRIB Day Table. The table has 64 entries for indiviual VCs and 1 entry for all other VCs. |
| 1.3.6.1.4.1.181.2.2.2.10.7.1.3 | ColumndsRpFrDayNum | read-only | mandatory | The FRIB Day Table index. The valid values are 1 to 7 days. 1 is the most recent interval. |
| 1.3.6.1.4.1.181.2.2.2.10.7.1.4 | ColumndsRpFrDayVc | read-only | mandatory | The VC for this entry in the FRIB Day Table. |
| 1.3.6.1.4.1.181.2.2.2.10.7.1.5 | ColumndsRpFrDayFrames | read-only | mandatory | The number of Frame Relay packets transmitted or received during one of the previous days. |
| 1.3.6.1.4.1.181.2.2.2.10.7.1.6 | ColumndsRpFrDayOctets | read-only | mandatory | The number of octets transmitted or received during one of the previous days. |
| 1.3.6.1.4.1.181.2.2.2.10.7.1.7 | ColumndsRpFrDayKbps | read-only | mandatory | The Kilobit/sec rate for data transmitted or received during one of the previous days. |
| 1.3.6.1.4.1.181.2.2.2.10.7.1.8 | ColumndsRpFrDayFpMax | read-only | mandatory | The maximum FPING roundtrip time (in msec) of all FPINGs on this VC during one of the previous days. |
| 1.3.6.1.4.1.181.2.2.2.10.7.1.9 | ColumndsRpFrDayFpAvg | read-only | mandatory | The average FPING roundtrip time (in msec) of all FPINGs on this VC during one of the previous days. |
| 1.3.6.1.4.1.181.2.2.2.10.7.1.10 | ColumndsRpFrDayFpLost | read-only | mandatory | The number of FPINGs responses received on this VC during one of the previous days. |
| 1.3.6.1.4.1.181.2.2.2.10.7.1.11 | ColumndsRpFrDayFpSent | read-only | mandatory | The number of FPINGs transmitted on this VC during one of the previous days. |
| 1.3.6.1.4.1.181.2.2.2.10.7.1.12 | ColumndsRpFrDayStatus | read-only | mandatory | The status summary of this VC during the one of the previous days: VALUE DESCRIPTION U VC link is UP D VC link is DOWN B At least one frame had the BECN bit se… |
| 1.3.6.1.4.1.181.2.2.2.10.8 | TabledsRpFrUrTable | not-accessible | mandatory | This is a utilization report on non-flag octets that have been transmitted out the network interface for each VC. |
| 1.3.6.1.4.1.181.2.2.2.10.8.1 | RowdsRpFrUrEntry | not-accessible | mandatory | This is an entry in the FRIB Ur Table. |
| 1.3.6.1.4.1.181.2.2.2.10.8.1.1 | ColumndsRpFrUrDir | read-only | mandatory | The direction index to the FRIB Ur Table. Receive is currently not supported and will return a 0 for the Counter values. VALUE DESCRIPTION 1 Transmit 2 Receive |
| 1.3.6.1.4.1.181.2.2.2.10.8.1.2 | ColumndsRpFrUrVcIndex | read-only | mandatory | The VC index to the FRIB Ur Table. The table has 64 entries for indiviual VCs |
| 1.3.6.1.4.1.181.2.2.2.10.8.1.3 | ColumndsRpFrUrVc | read-only | mandatory | The VC for this entry in the FRIB Ur Table. |
| 1.3.6.1.4.1.181.2.2.2.10.8.1.4 | ColumndsRpFrUrCIRExceeded | read-only | mandatory | The number of times the CIR threshold was exceeded, but the EIR threshold was not crossed. |
| 1.3.6.1.4.1.181.2.2.2.10.8.1.5 | ColumndsRpFrUrCIRExceededOctets | read-only | mandatory | The number of octets that exceeded the CIR threshold, but were less then the EIR threshold. |
| 1.3.6.1.4.1.181.2.2.2.10.8.1.6 | ColumndsRpFrUrEIRExceeded | read-only | mandatory | The number of times the EIR threshold was exceeded. |
| 1.3.6.1.4.1.181.2.2.2.10.8.1.7 | ColumndsRpFrUrEIRExceededOctets | read-only | mandatory | The number of octets that exceeded the EIR threshold. |
| 1.3.6.1.4.1.181.2.2.2.11 | ScalardsRpDdsDuration | read-only | mandatory | . |
| 1.3.6.1.4.1.181.2.2.2.12 | TabledsRpDdsTable | not-accessible | mandatory | This is the table of DDS statistical data. |
| 1.3.6.1.4.1.181.2.2.2.12.1 | RowdsRpDdsEntry | not-accessible | mandatory | This is an entry in the DDS Table. |
| 1.3.6.1.4.1.181.2.2.2.12.1.1 | ColumndsRpDdsIfIndex | read-only | mandatory | The index into the table. This is mib-II's ifIndex. |
| 1.3.6.1.4.1.181.2.2.2.12.1.2 | ColumndsRpDdsAvailableSecs | read-only | mandatory | . |
| 1.3.6.1.4.1.181.2.2.2.12.1.3 | ColumndsRpDdsTotalSecs | read-only | mandatory | . |
| 1.3.6.1.4.1.181.2.2.2.12.1.4 | ColumndsRpDdsBPVs | read-only | mandatory | . |
| 1.3.6.1.4.1.181.2.2.3 | NodedsLm | |||
| 1.3.6.1.4.1.181.2.2.3.1 | ScalardsLmLoopback | read-write | mandatory | This is the type of loopback that is currently active. The values have the following meanings: VALUE DESCRIPTION lmLbkNone(1) No loopback is set lmLbkLine(2) L… |
| 1.3.6.1.4.1.181.2.2.3.2 | ScalardsLmSelfTestState | read-write | mandatory | This object will start a self test operation when set to lmSelfTestStart(2). At the completion of the test, it will return to its normal state of lmSelfTestIdl… |
| 1.3.6.1.4.1.181.2.2.3.3 | ScalardsLmSelfTestResults | read-only | mandatory | The results of the last self test operation. |
| 1.3.6.1.4.1.181.2.2.4 | NodedsRm | |||
| 1.3.6.1.4.1.181.2.2.4.1 | ScalardsRmLbkCode | read-write | mandatory | The type of remote loopback that is currently set. The possible values are: VALUE DESCRIPTION rmRNone(1) No loopback is set rmRst1(2) A remote loopback reset c… |
| 1.3.6.1.4.1.181.2.2.4.2 | ScalardsRmTestCode | read-write | mandatory | The type of remote test code that is currently being sent. The possible values are: VALUE DESCRIPTION rmTestNone(1) No test code is being sent rmTestQrs(2) QRS… |
| 1.3.6.1.4.1.181.2.2.4.3 | ScalardsRmBertState | read-only | mandatory | The current BERT state. The possible values are: VALUE DESCRIPTION rmBertIdle(1) No BERT test is active rmBertOtherStart(2) BERT was started from the control p… |
| 1.3.6.1.4.1.181.2.2.4.4 | ScalardsRmBertCode | read-write | mandatory | This object controls the activation of BERT tests. The possible values are: VALUE DESCRIPTION rmBertNone(1) No BERT test is active rmBertQrs(2) BERT for QRS rm… |
| 1.3.6.1.4.1.181.2.2.4.5 | ScalardsRmBertTestSecs | read-only | mandatory | The number of seconds the requested test code has been detected since the start of the BERT. |
| 1.3.6.1.4.1.181.2.2.4.6 | ScalardsRmBertBitErrors | read-only | mandatory | The number of bit errors detected since the start of the BERT. |
| 1.3.6.1.4.1.181.2.2.4.7 | ScalardsRmBertErrdSecs | read-only | mandatory | The number of errored seconds detected since the start of the BERT. |
| 1.3.6.1.4.1.181.2.2.4.8 | ScalardsRmBertTotalErrors | read-only | mandatory | The number of total errors detected since the start of the BERT. |
| 1.3.6.1.4.1.181.2.2.4.9 | ScalardsRmBertReSync | read-only | mandatory | The number of times BERT has lost and re-aquired the pattern. |
| 1.3.6.1.4.1.181.2.2.4.10 | NodedsRmFping | |||
| 1.3.6.1.4.1.181.2.2.4.10.1 | ScalardsRmFpingAction | read-write | mandatory | The control actions for the FPING test. Possible values are: VALUE DESCRIPTION rmFpingStart(1) Start sending FPINGs rmFpingStop(2) Stop sending FPINGs |
| 1.3.6.1.4.1.181.2.2.4.10.2 | ScalardsRmFpingState | read-only | mandatory | The current state of the FPING tester. Possible values are: VALUE DESCRIPTION rmFpingIdle(1) No FPINGs are being generated rmFpingOtherStart(2) FPINGs are bein… |
| 1.3.6.1.4.1.181.2.2.4.10.3 | ScalardsRmFpingVc | read-write | mandatory | The VC that FPINGs will be sent on. VC values range from (0..1023) if the Frame Relay address length is 2 octets and (0..8388607) if the address length is 4 oc… |
| 1.3.6.1.4.1.181.2.2.4.10.4 | ScalardsRmFpingFreq | read-write | mandatory | The frequency (in seconds) that FPING packets will be transmitted. The range is (5..255). Default is 5. |
| 1.3.6.1.4.1.181.2.2.4.10.5 | ScalardsRmFpingLen | read-write | mandatory | The length (in octets) of the payload portion of the FPING packets. The range is (0..1400). Default is 0. |
| 1.3.6.1.4.1.181.2.2.4.10.6 | ScalardsRmFpingCur | read-only | mandatory | The roundtrip time (in msec) of the last FPING sent. |
| 1.3.6.1.4.1.181.2.2.4.10.7 | ScalardsRmFpingMin | read-only | mandatory | The minimum roundtrip time (in msec) of all FPINGs sent during this test. |
| 1.3.6.1.4.1.181.2.2.4.10.8 | ScalardsRmFpingMax | read-only | mandatory | The maximum roundtrip time (in msec) of all FPINGs sent during this test. |
| 1.3.6.1.4.1.181.2.2.4.10.9 | ScalardsRmFpingAvg | read-only | mandatory | The average roundtrip time (in msec) of all FPINGs sent during this test. |
| 1.3.6.1.4.1.181.2.2.4.10.10 | ScalardsRmFpingLost | read-only | mandatory | The number of FPING packets lost during this test. |
| 1.3.6.1.4.1.181.2.2.4.10.11 | ScalardsRmFpingTotal | read-only | mandatory | The total number of FPING packets transmitted during this test. |
| 1.3.6.1.4.1.181.2.2.4.10.12 | ScalardsRmFpingRmtVc | read-only | mandatory | The VC used at the remote end of the circuit. |
| 1.3.6.1.4.1.181.2.2.4.10.13 | ScalardsRmFpingRmtIp | read-only | mandatory | The IP address of the unit responding to FPINGs. |
| 1.3.6.1.4.1.181.2.2.4.11 | ScalardsRmInsertBitError | read-write | mandatory | Possible values are: VALUE DESCRIPTION insertBitError(1) Start sending FPINGs noInsertBitError(2) Stop sending FPINGs |
| 1.3.6.1.4.1.181.2.2.5 | NodedsAc | |||
| 1.3.6.1.4.1.181.2.2.5.1 | ScalardsAcAlmMsg | read-write | mandatory | This object controls the displaying/sending of alarm messages. Alarm messages will be sent in the format determined by dsAcAlmFormat if dsAcAlmMsg is set to ac… |
| 1.3.6.1.4.1.181.2.2.5.2 | ScalardsAcYelAlm | read-write | mandatory | This object determines if incoming Yellow Alarm will cause an alarm message to be sent. Setting this object to acYelAlmEnable(1) causes an alarm to be sent whe… |
| 1.3.6.1.4.1.181.2.2.5.3 | ScalardsAcDeact | read-write | mandatory | This object controls the number of seconds an alarm condition must remain clear before the unit declares it cleared. The range is from 0 to 15 seconds. |
| 1.3.6.1.4.1.181.2.2.5.4 | ScalardsAcEst | read-write | mandatory | This object determines the threshold of errored seconds that triggers an Excessive Error Rate (EER) alarm. Setting this object to zero disables errored seconds… |
| 1.3.6.1.4.1.181.2.2.5.5 | ScalardsAcUst | read-write | mandatory | This object determines the threshold of uavailable seconds that triggers an Excessive Error Rate (EER) alarm. Setting this object to zero disables unavailable … |
| 1.3.6.1.4.1.181.2.2.5.6 | ScalardsAcSt | read-write | mandatory | This object determines the window used to calculate whether an Excessive Error Rate (EER) alarm should be generated from errored seconds or unavailable seconds… |
| 1.3.6.1.4.1.181.2.2.5.7 | ScalardsAcBerAlm | read-write | mandatory | This object controls the sending of a Bit Error Rate (BER) alarm. The possible values are: VALUE DESCRIPTION acBerAlmEnable(1) Enable sending BER alarms acBerA… |
| 1.3.6.1.4.1.181.2.2.5.8 | ScalardsAcRfaAlm | read-write | mandatory | This object controls the sending of a Remote Frame Alarm (RFA). The possible values are: VALUE DESCRIPTION acRfaAlmEnable(1) Enable sending RFA alarms acRfaAlm… |
| 1.3.6.1.4.1.181.2.2.5.9 | ScalardsAcAisAlm | read-write | mandatory | This object controls the sending of Alarm Indication Signal (AIS) alarms. The possible values are: VALUE DESCRIPTION acAisAlmEnable(1) Enable sending AIS alarm… |
| 1.3.6.1.4.1.181.2.2.6 | NodedsCc | |||
| 1.3.6.1.4.1.181.2.2.6.1 | ScalardsCcEcho | read-write | mandatory | This object controls character echo on the control port. The possible values are: VALUE DESCRIPTION ccEchoEnable(1) Enable control port echo ccEchoDisable(2) D… |
| 1.3.6.1.4.1.181.2.2.6.2 | ScalardsCcControlPort | read-write | mandatory | This object determines whether the control port is the DCE or DTE port. The possible values are: VALUE DESCRIPTION ccDce(1) The control port is the DCE port cc… |
| 1.3.6.1.4.1.181.2.2.6.3 | ScalardsCcBaud | read-only | mandatory | The baud rate of the control port. The possible values are: VALUE DESCRIPTION cc2400(1) 2400 baud cc9600(2) 9600 baud cc19200(3) 19200 baud cc38400(4) 38400 ba… |
| 1.3.6.1.4.1.181.2.2.6.4 | ScalardsCcParity | read-only | mandatory | The parity of the control port. The possible values are: VALUE DESCRIPTION ccNone(1) No parity ccEven(2) Even parity ccOdd(3) Odd parity |
| 1.3.6.1.4.1.181.2.2.6.5 | ScalardsCcDataBits | read-only | mandatory | The number of data bits for the control port. The possible values are: VALUES DESCRIPTION cc7Bit(1) 7 data bits cc8Bit(2) 8 data bits |
| 1.3.6.1.4.1.181.2.2.6.6 | ScalardsCcStopBits | read-only | mandatory | The number of stop bits for the control port. The possible values are: VALUE DESCRIPTION cc1Bit(1) 1 stop bit cc2Bit(2) 2 stop bits |
| 1.3.6.1.4.1.181.2.2.6.7 | ScalardsCcDceIn | read-only | mandatory | The input status of the DCE signals RTS and DTR. The possible valuesa re: VALUE DESCRIPTION ccBothOff(1) RTS off, DTR off ccRtsOnDtrOff(2) RTS on, DTR off ccRt… |
| 1.3.6.1.4.1.181.2.2.6.8 | ScalardsCcDteIn | read-only | mandatory | The input status of the DTE signals CTS and DCD. The possible values are: VALUE DESCRIPTION ccBothOff(1) CTS off, DCD off ccCtsOnDcdOff(2) CTS on, DCD off ccCT… |
| 1.3.6.1.4.1.181.2.2.7 | NodedsDc | |||
| 1.3.6.1.4.1.181.2.2.7.1 | TabledsDcTable | not-accessible | mandatory | The Data Port Configuration Table. This table contains information on the configuration of each of the unit's data ports. |
| 1.3.6.1.4.1.181.2.2.7.1.1 | RowdsDcEntry | not-accessible | mandatory | An entry in the Data Port Configuration Table. |
| 1.3.6.1.4.1.181.2.2.7.1.1.1 | ColumndsDcIndex | read-only | mandatory | The index to the Data Port Configuration Table. The possible values are 1 through 2. |
| 1.3.6.1.4.1.181.2.2.7.1.1.2 | ColumndsDcDataInvert | read-write | mandatory | The data inversion of the data port. The possible values are: VALUE DESCRIPTION dcDataInvertEnable(1) Invert the data port signal dcDataInvertDisable(2) Don't … |
| 1.3.6.1.4.1.181.2.2.7.1.1.3 | ColumndsDcInterface | read-write | mandatory | The type of electrical interface the data port is using. The possible values are: VALUE DESCRIPTION dcV35Interface(1) V.35 dcEia530Interface(2) EIA-530 dcV35DS… |
| 1.3.6.1.4.1.181.2.2.7.1.1.4 | ColumndsDcClockSource | read-write | mandatory | The clock source for the data port. The possible values are: VALUE DESCRIPTION dcInternalClock(1) Use the internal clock dcExternalClock(2) Use the external cl… |
| 1.3.6.1.4.1.181.2.2.7.1.1.5 | ColumndsDcXmtClkInvert | read-write | mandatory | The inversion status of the transmit clock signal for the data port. The possible values are: VALUE DESCRIPTION dcXClkInvertEnable(1) Invert the transmit clock… |
| 1.3.6.1.4.1.181.2.2.7.1.1.6 | ColumndsDcRcvClkInvert | read-write | mandatory | The inversion status of the received clock signal for the data port. The possible values are: VALUE DESCRIPTION dcRClkInvertEnable(1) Invert the received clock… |
| 1.3.6.1.4.1.181.2.2.7.1.1.7 | ColumndsDcIdleChar | read-write | mandatory | The idle character to use for the data port. The possible values are: VALUE DESCRIPTION dc7eIdleChar(1) The idle character is hex 7E dc7fIdleChar(1) The idle c… |
| 1.3.6.1.4.1.181.2.2.7.1.1.8 | ColumndsDcLOSInput | read-write | mandatory | The combination of RTS and DTR that will cause a data port Loss of Signal alarm. The possible values are: VALUE DESCRIPTION dcLosNone(1) Data port LOS is disab… |
| 1.3.6.1.4.1.181.2.2.8 | NodedsFc | |||
| 1.3.6.1.4.1.181.2.2.8.1 | ScalardsFcLoadXcute | read-write | mandatory | The Fractional Table that is active. The possible values are: VALUE DESCRIPTION fcLoadXcuteIdle(1) The normal state fcLoadXcuteStartA(2) Load and execute table… |
| 1.3.6.1.4.1.181.2.2.8.2 | TabledsFcTable | not-accessible | mandatory | This is the DS1/E1 Fractional Table. This table consists of configuration information about DS1/E1 fractional services. |
| 1.3.6.1.4.1.181.2.2.8.2.1 | RowdsFcEntry | not-accessible | mandatory | This is an entry in the Fractional Table. |
| 1.3.6.1.4.1.181.2.2.8.2.1.1 | ColumndsFcTableIndex | read-only | mandatory | This is the index into the Fractional Table. The possible values are: VALUE DESCRIPTION 1 Stored configuration A 2 Stored configuration B 3 Currently executing… |
| 1.3.6.1.4.1.181.2.2.8.2.1.2 | ColumndsFcChanIndex | read-only | mandatory | This is the index of the fractional channel. DS1 has 24 channels and E1 has 32. |
| 1.3.6.1.4.1.181.2.2.8.2.1.3 | ColumndsFcChanMap | read-write | mandatory | The destination and data rate of the channel. The possible values are: VALUE DESCRIPTION fcChanIdle(1) The channel is idle fcChanTiData(2) The channel carries … |
| 1.3.6.1.4.1.181.2.2.8.3 | ScalardsFcMap16 | read-write | mandatory | This object determines if channel 16 is available for user payload data. This is only possible if the unit is configured for Common Channel Signalling. The pos… |
| 1.3.6.1.4.1.181.2.2.9 | NodedsFmc | |||
| 1.3.6.1.4.1.181.2.2.9.1 | ScalardsFmcFrameType | read-write | mandatory | The frame type for packets being transmitted and received for IP connectivity. The possible values are: VALUE DESCRIPTION fmcFrNlpid(1) Frame Relay NLPID encap… |
| 1.3.6.1.4.1.181.2.2.9.2 | ScalardsFmcAddrOctets | read-write | mandatory | The length in octets of the Frame Relay address. The possible values are: VALUE DESCRIPTION fmc2Octets(1) The address is 2 octets long fmc4Octets(1) The addres… |
| 1.3.6.1.4.1.181.2.2.9.3 | ScalardsFmcFcsBits | read-write | mandatory | The length in bits of the Frame Relay FCS. The possible values are: VALUE DESCRIPTION fmc16Bits(1) The FCS field is 16 bits long fmc32Bits(2) The FCS field is … |
| 1.3.6.1.4.1.181.2.2.9.4 | ScalardsFmcUpperBW | read-write | mandatory | The percent of bandwidth utilization threshold. If the threshold is exceeded, an event will be recorded in the performance data and a trap (if configured) will… |
| 1.3.6.1.4.1.181.2.2.9.5 | ScalardsFmcFpingOper | read-write | mandatory | The enabling and disabling of FPING operation. Valid values are Enable and Disable. |
| 1.3.6.1.4.1.181.2.2.9.6 | ScalardsFmcFpingGen | read-write | mandatory | The number of distinct VC to be received on the NI before FPINGs are automatically sent out. |
| 1.3.6.1.4.1.181.2.2.9.7 | ScalardsFmcFpingThres | read-write | mandatory | The maximum roundtrip time of a FPING packet in milliseconds. If the threshold is exceeded, an event will be recorded in the performance data and a trap (if co… |
| 1.3.6.1.4.1.181.2.2.9.8 | ScalardsFmcFpingRst | read-write | mandatory | Reset the specified VC to an initial state where FPING connectivity is check for. Valid values are 0-1023 for a 2 octet address field and 0-8388607 for a 4 oct… |
| 1.3.6.1.4.1.181.2.2.9.9 | ScalardsFmcAddVc | read-write | mandatory | Add a VC to the list of monitored VCs |
| 1.3.6.1.4.1.181.2.2.9.10 | ScalardsFmcDelVc | read-write | mandatory | Del a VC from the list of monitored VCs. Any statistics related to this VC will be moved to the 'other' category. |
| 1.3.6.1.4.1.181.2.2.10 | NodedsMc | |||
| 1.3.6.1.4.1.181.2.2.10.1 | ScalardsMcNetif | read-write | mandatory | The management access port(s) for Telnet and SNMP. The possible values are: VALUE DESCRIPTION mcNetNone(1) No ip interface paths are active mcNetEthernet(2) Th… |
| 1.3.6.1.4.1.181.2.2.10.2 | ScalardsMcT1DLPath | read-write | mandatory | The T1 DataLink value. This configuration is used if the NETIF has a DataLink component. The possible values are: VALUE DESCRIPTION mcDLPathFdl(1) The DataLink… |
| 1.3.6.1.4.1.181.2.2.10.3 | ScalardsMcDefRoute | read-write | mandatory | The unit's default IP router. |
| 1.3.6.1.4.1.181.2.2.10.4 | ScalardsMcCIpAddr | read-write | mandatory | The IP address for the unit's Control Port. |
| 1.3.6.1.4.1.181.2.2.10.5 | ScalardsMcDIpAddr | read-write | mandatory | The IP address for the unit's Data Link. |
| 1.3.6.1.4.1.181.2.2.10.6 | ScalardsMcCDIpMask | read-write | mandatory | The IP subnet mask for the unit's Control Port and Data Link. |
| 1.3.6.1.4.1.181.2.2.10.7 | ScalardsMcEIpAddr | read-write | mandatory | The IP address for the unit's Ethernet Port. |
| 1.3.6.1.4.1.181.2.2.10.8 | ScalardsMcEIpMask | read-write | mandatory | The IP subnet mask for the unit's Ethernet Port. |
| 1.3.6.1.4.1.181.2.2.10.9 | ScalardsMcIIpAddr | read-write | mandatory | The IP address for the unit's In-Band Interface. |
| 1.3.6.1.4.1.181.2.2.10.10 | ScalardsMcIIpMask | read-write | mandatory | The IP subnet mask for the unit's In-Band Interface. |
| 1.3.6.1.4.1.181.2.2.10.11 | NodedsAmc | |||
| 1.3.6.1.4.1.181.2.2.10.11.1 | ScalardsAmcAgent | read-write | mandatory | The operational status of the SMMP agent. The possible values are: VALUE DESCRIPTION. amcEnabled(1) The SNMP agent is enabled amcDisabled(2) The SNMP agent is … |
| 1.3.6.1.4.1.181.2.2.10.11.2 | ScalardsAmcSourceScreen | read-write | mandatory | The status of the IP source address screening security. The possible values are: VALUE DESCRIPTION mcIpScreen(1) The screening security is enabled mcNoScreen(2… |
| 1.3.6.1.4.1.181.2.2.10.11.3 | TabledsAmcTrapTable | not-accessible | mandatory | The SNMP Trap Table. This table lists the different types of traps and allows each type to be individually enabled/disabled. Currently, the types of traps are:… |
| 1.3.6.1.4.1.181.2.2.10.11.3.1 | RowdsAmcTrapEntry | not-accessible | mandatory | An entry in the SNMP Trap Table. |
| 1.3.6.1.4.1.181.2.2.10.11.3.1.1 | ColumndsAmcTrapType | read-only | mandatory | The type of trap. There is one row in dsAmcTrapTable for each type of trap. The possible values are: VALUE DESCRIPTION amcStartTraps(1) Cold-Start and Warm-Sta… |
| 1.3.6.1.4.1.181.2.2.10.11.3.1.2 | ColumndsAmcTrapStatus | read-write | mandatory | Indicates whether the particular type of trap is enabled or disabled. The possible values are: VALUE DESCRIPTION amcEnabled(1) These types of traps are enabled… |
| 1.3.6.1.4.1.181.2.2.10.11.4 | TabledsAmcScrnTable | not-accessible | mandatory | The Source Address Screening Table. The entries in this table are the IP addresses which are allowed to access this unit. |
| 1.3.6.1.4.1.181.2.2.10.11.4.1 | RowdsAmcScrnEntry | not-accessible | mandatory | An entry in the Source Address Screening Table. |
| 1.3.6.1.4.1.181.2.2.10.11.4.1.1 | ColumndsAmcScrnIndex | read-only | mandatory | The index to the Source Address Screening Table. Ten entries are possible. |
| 1.3.6.1.4.1.181.2.2.10.11.4.1.2 | ColumndsAmcScrnIpAddr | read-write | mandatory | An IP Address(es) which will be permitted to access this unit. This object is combined with dsAmcScrnIpMask to allow a single entry to permit access by an enti… |
| 1.3.6.1.4.1.181.2.2.10.11.4.1.3 | ColumndsAmcScrnIpMask | read-write | mandatory | An IP subnet mask that indicates which portion of dsAmcScrnIpAddr must be matched to permit access. This allows a single entry to provide access by an entire I… |
| 1.3.6.1.4.1.181.2.2.10.11.5 | TabledsAmcTrapDestTable | not-accessible | mandatory | The SNMP Trap Destinations Table. This table lists up to 10 addresses to send SNMP traps to when alarm conditions occur. |
| 1.3.6.1.4.1.181.2.2.10.11.5.1 | RowdsAmcTrapDestEntry | not-accessible | mandatory | An entry in the SNMP Trap Destinations Table. |
| 1.3.6.1.4.1.181.2.2.10.11.5.1.1 | ColumndsAmcTrapDestIndex | read-only | mandatory | The index to the SNMP Trap Destinations Table. |
| 1.3.6.1.4.1.181.2.2.10.11.5.1.2 | ColumndsAmcTrapDestIpAddr | read-write | mandatory | The IP address portion of a Trap Destination Entry, used when sending SNMP traps. |
| 1.3.6.1.4.1.181.2.2.10.11.5.1.3 | ColumndsAmcTrapDestVc | read-write | mandatory | The VC portion of a Trap Destination Entry, used when sending SNMP traps. |
| 1.3.6.1.4.1.181.2.2.10.11.5.1.4 | ColumndsAmcTrapDestPort | read-write | mandatory | The Port portion of a Trap Destination Entry, used when sending SNMP traps. |
| 1.3.6.1.4.1.181.2.2.10.12 | ScalardsMcIVc | read-write | mandatory | fill in later. |
| 1.3.6.1.4.1.181.2.2.10.13 | ScalardsMcIPort | read-write | mandatory | fill in later The possible values are: VALUE DESCRIPTION amcNiPort(1) Communicate over NI amcDPPort(2) communicate over DP |
| 1.3.6.1.4.1.181.2.2.11 | NodedsNc | |||
| 1.3.6.1.4.1.181.2.2.11.1 | ScalardsNcFraming | read-write | mandatory | The type of framing being used on the Network Interface. The possible values are: VALUE DESCRIPTION ncSF(1) SF (D4) framing ncESF(2) ESF framing ncEricsson(3) … |
| 1.3.6.1.4.1.181.2.2.11.2 | ScalardsNcCoding | read-write | mandatory | The type of line coding being used on the Network Interface. The possible values are: VALUE DESCRIPTION ncAmi(1) AMI line coding ncB8zs(2) B8ZS line coding. |
| 1.3.6.1.4.1.181.2.2.11.3 | ScalardsNcT1403 | read-write | mandatory | This object enables/disables the sending of T1.403 PRM messages. The possible values are: VALUE DESCRIPTION ncT1403Enable(1) Enable T1.403 messages ncT1403Disa… |
| 1.3.6.1.4.1.181.2.2.11.4 | ScalardsNcYellow | read-write | mandatory | This object enables/disables sending Yellow alarm out the Network Interface upon receipt of an alarm on the Network Interface. The possible values are: VALUE D… |
| 1.3.6.1.4.1.181.2.2.11.5 | ScalardsNcAddr54 | read-write | mandatory | If 54016 addressing is enabled, this object determines what type of addressing the unit responds to. The possible values are: VALUE DESCRIPTION ncAddrCsu(1) CS… |
| 1.3.6.1.4.1.181.2.2.11.6 | ScalardsNc54016 | read-write | mandatory | This object determines whether the unit responds to 54016 addressing modes. The possible values are: VALUE DESCRIPTION nc54016Enable(1) Enabled 54016 addressin… |
| 1.3.6.1.4.1.181.2.2.11.7 | ScalardsNcLbo | read-write | mandatory | The Network Interface Line Build Out setting. The possible values are: VALUE DESCRIPTION ncLbo0(1) 0.0dB line attenuation ncLbo1(2) 7.5dB line attenuation ncLb… |
| 1.3.6.1.4.1.181.2.2.11.8 | ScalardsNcMF16 | read-write | mandatory | The E1 network interface Time Slot 16 MultiFrame alignment signal setting. The possible values are: VALUE DESCRIPTION ncMF16Enable(1) Enable the Time Slot 16 M… |
| 1.3.6.1.4.1.181.2.2.11.9 | ScalardsNcCRC | read-write | mandatory | The E1 network interface CRC generation/checking setting. The possible values are: VALUE DESCRIPTION ncCrcEnable(1) Enable CRC generation/checking ncCrcDisable… |
| 1.3.6.1.4.1.181.2.2.11.10 | ScalardsNcFasAlign | read-write | mandatory | The E1 network interface Time Slot 0 NOT-FAS Word setting. The possible values are: VALUE DESCRIPTION ncFasWord(1) Use the NOT-FAS word ncNonFasWord(2) Do not … |
| 1.3.6.1.4.1.181.2.2.11.11 | ScalardsNcE1DLPath | read-write | mandatory | The E1 network interface Sa bit usage. If Sa bits are being used for data link communications, both the near and far end units must agree on which Sa bit to us… |
| 1.3.6.1.4.1.181.2.2.11.12 | ScalardsNcKA | read-write | mandatory | The status of sending E1 remote Frame Alarm into the NI during alarms. The Possible values are: VALUE DESCRIPTION ncFramedKeepAlive(1) Enable Framed Keep Alive… |
| 1.3.6.1.4.1.181.2.2.11.13 | ScalardsNcGenRfa | read-write | mandatory | The status of sending E1 remote Frame Alarm into the NI during alarms. The Possible values are: VALUE DESCRIPTION ncGenRfaEnable(1) Enable RFA insertion ncGenR… |
| 1.3.6.1.4.1.181.2.2.11.14 | ScalardsNcPassTiRfa | read-write | mandatory | The status of sending the RFA received on the network interface out the terminal interface. This function is not possible on a DSU only, it must be an add/drop… |
| 1.3.6.1.4.1.181.2.2.11.15 | ScalardsNcIdle | read-write | mandatory | The idle code to be transmited in the idle NI and TI channels. This code is also sent in all TI channels when the TI is experiencing an OOF. |
| 1.3.6.1.4.1.181.2.2.11.16 | ScalardsNcDdsType | read-write | mandatory | The Possible values are: VALUE DESCRIPTION scDds56K(1) Set unit to 56K Operation scDds64K(2) Set unit to 56K Operation |
| 1.3.6.1.4.1.181.2.2.12 | NodedsSc | |||
| 1.3.6.1.4.1.181.2.2.12.1 | ScalardsScMonth | read-write | mandatory | The calendar number of the current month. 1 is January. |
| 1.3.6.1.4.1.181.2.2.12.2 | ScalardsScDay | read-write | mandatory | The number of the current day. |
| 1.3.6.1.4.1.181.2.2.12.3 | ScalardsScYear | read-write | mandatory | The number of the current year. 95 is 1995. |
| 1.3.6.1.4.1.181.2.2.12.4 | ScalardsScHour | read-write | mandatory | The number of the current hour. 0 is 12:00am. |
| 1.3.6.1.4.1.181.2.2.12.5 | ScalardsScMinutes | read-write | mandatory | The number of the current minute. |
| 1.3.6.1.4.1.181.2.2.12.6 | ScalardsScName | read-write | mandatory | The Site Name of the unit. |
| 1.3.6.1.4.1.181.2.2.12.7 | ScalardsScSlotAddr | read-write | mandatory | The Kentrox-specific slot address. The 01 in the address 01:02:003. |
| 1.3.6.1.4.1.181.2.2.12.8 | ScalardsScShelfAddr | read-write | mandatory | The Kentrox-specific shelf address. The 02 in the address 01:02:003. |
| 1.3.6.1.4.1.181.2.2.12.9 | ScalardsScGroupAddr | read-write | mandatory | The Kentrox-specific group address. The 003 in the address 01:02:003. |
| 1.3.6.1.4.1.181.2.2.12.10 | ScalardsScFrontPanel | read-write | mandatory | The status of the front panel buttons. The possible values are: VALUE DESCRIPTION scFpEnable(1) Enable the front panel buttons scFpDisable(2) Disable the front… |
| 1.3.6.1.4.1.181.2.2.12.11 | ScalardsScDSCompatible | read-write | mandatory | The status of the datasmart compatibility function. This should be set to scDSEnabled(1) when the far end unit is a eariler model datasmart, not a datasmart. T… |
| 1.3.6.1.4.1.181.2.2.12.12 | ScalardsScClockSource | read-write | mandatory | The source of the timing clock. The various options are: VALUE DESCRIPTION scTerminalTiming(1) Use the clock coming in on the Terminal Interface scThroughTimin… |
| 1.3.6.1.4.1.181.2.2.12.13 | ScalardsScAutologout | read-write | mandatory | The time (in minutes) to wait for a keypress before logging the current user out. If this object is set to 0, autologout is disabled. |
| 1.3.6.1.4.1.181.2.2.12.14 | ScalardsScZeroPerData | read-write | mandatory | This object will zero all performance report counters if it is set to scZallStart(2). |
| 1.3.6.1.4.1.181.2.2.12.15 | ScalardsScWyv | read-only | mandatory | The string returned by the user interface command WYV, What's Your Version. |
| 1.3.6.1.4.1.181.2.2.12.16 | ScalardsScAutoCfg | read-write | mandatory | This object enables/disables the Auto-Configuration feature, which allows units in a daisy chain to be automatically configured by the Daisy Chain Controller. … |
| 1.3.6.1.4.1.181.2.2.12.17 | ScalardsScTftpSwdl | read-write | mandatory | A text string used to initiate or check the status of a TFTP file transfer operation for doing a software download. To initiate a TFTP software download, set t… |
| 1.3.6.1.4.1.181.2.2.12.18 | ScalardsScBoot | read-write | mandatory | This variable is used to force a system reboot: scBootIdle Does nothing. scBootActive Reboots from the executing FLASH ROM bank. scBootInactive Reboots from th… |
| 1.3.6.1.4.1.181.2.2.12.19 | ScalardsScOperMode | read-write | mandatory | fill in later. scTransparentMode Unit doesn't monitor FR traffic scMonitorMode Unit monitors FR traffic |
| 1.3.6.1.4.1.181.2.2.12.20 | ScalardsScYearExtention | read-write | mandatory | . |
| 1.3.6.1.4.1.181.2.2.12.21 | ScalardsScMonthExtention | read-write | mandatory | . |
| 1.3.6.1.4.1.181.2.2.12.22 | ScalardsScDayExtention | read-write | mandatory | . |
| 1.3.6.1.4.1.181.2.2.12.23 | ScalardsScHourExtention | read-write | mandatory | . |
| 1.3.6.1.4.1.181.2.2.12.24 | ScalardsScMinExtention | read-write | mandatory | . |
| 1.3.6.1.4.1.181.2.2.12.25 | ScalardsScSecExtention | read-only | mandatory | . |
| 1.3.6.1.4.1.181.2.2.12.26 | ScalardsScPinK | read-write | mandatory | . |
| 1.3.6.1.4.1.181.2.2.13 | NodedsTc | |||
| 1.3.6.1.4.1.181.2.2.13.1 | ScalardsTcFraming | read-write | mandatory | The line framing for the Terminal Interface. The possible values are: VALUE DESCRIPTION tcSF(1) SF (D4) framing tcESF(2) ESF framing tcEricsson(3) Ericsson fra… |
| 1.3.6.1.4.1.181.2.2.13.2 | ScalardsTcCoding | read-write | mandatory | The line coding for the Terminal Interface. The possible values are: VALUE DESCRIPTION tcAmi(1) AMI line coding tcB8zs(2) B8ZS line coding |
| 1.3.6.1.4.1.181.2.2.13.3 | ScalardsTcIdle | read-write | mandatory | The code that is sent out the idle DS0 channels of the terminal interface. |
| 1.3.6.1.4.1.181.2.2.13.4 | ScalardsTcEqual | read-write | mandatory | The line equalization for the Terminal Interface. The possible values are: VALUE DESCRIPTION tcTe0(1) 0-133 feet tcTe1(2) 133-266 feet tcTe2(3) 266-399 feet tc… |
| 1.3.6.1.4.1.181.2.2.13.5 | ScalardsTcMF16 | read-write | mandatory | The E1 terminal interface Time Slot 16 MultiFrame alignment signal setting. The possible values are: VALUE DESCRIPTION tcMF16Enable(1) Enable the Time Slot 16 … |
| 1.3.6.1.4.1.181.2.2.13.6 | ScalardsTcCRC | read-write | mandatory | The E1 terminal interface CRC generation/checking setting. The possible values are: VALUE DESCRIPTION tcCrcEnable(1) Enable CRC generation/checking tcCrcDisabl… |
| 1.3.6.1.4.1.181.2.2.13.7 | ScalardsTcFasAlign | read-write | mandatory | The E1 terminal interface Time Slot 0 NOT-FAS Word setting. The possible values are: VALUE DESCRIPTION tcFasWord(1) Use the NOT-FAS word tcNonFasWord(2) Do not… |
| 1.3.6.1.4.1.181.2.2.13.8 | ScalardsTcAis | read-write | mandatory | This object controls the sending of Alarm Indication Signal (AIS) alarms. The possible values are: VALUE DESCRIPTION tcAisEnable(1) Enable sending AIS alarms t… |
| 1.3.6.1.4.1.181.2.2.13.9 | ScalardsTcGenRfa | read-write | mandatory | The status of sending E1 remote Frame Alarm into the TI during alarms. The Possible values are: VALUE DESCRIPTION tcGenRfaEnable(1) Enable RFA insertion tcGenR… |
| 1.3.6.1.4.1.181.2.2.13.10 | ScalardsTcPassTiRfa | read-write | mandatory | The status of sending the RFA received on the terminal interface out the network interface. This function is not possible on a DSU only, it must be an add/drop… |
| 1.3.6.1.4.1.181.2.2.14 | NodedsFp | |||
| 1.3.6.1.4.1.181.2.2.14.1 | NodedsFpFr56 | |||
| 1.3.6.1.4.1.181.2.2.14.1.1 | ScalardsFpFr56PwrLed | read-only | mandatory | The current state of the FP PWR LED. The Possible values are: VALUE DESCRIPTION fpLedIndeterminate (1) LED is not present on unit fpLedOff (2) LED is OFF fpLed… |
| 1.3.6.1.4.1.181.2.2.14.1.2 | ScalardsFpFr56DnldFailLed | read-only | mandatory | The current state of the FP DNLD/FAIL LED. The Possible values are: VALUE DESCRIPTION fpLedIndeterminate (1) LED is not present on unit fpLedOff (2) LED is OFF… |
| 1.3.6.1.4.1.181.2.2.14.1.3 | ScalardsFpFr56NiAlarmLed | read-only | mandatory | The current state of the FP NI ALARM LED. The Possible values are: VALUE DESCRIPTION fpLedIndeterminate (1) LED is not present on unit fpLedOff (2) LED is OFF … |
| 1.3.6.1.4.1.181.2.2.14.1.4 | ScalardsFpFr56NiDataLed | read-only | mandatory | The current state of the FP NI DATA LED. The Possible values are: VALUE DESCRIPTION fpLedIndeterminate (1) LED is not present on unit fpLedOff (2) LED is OFF f… |
| 1.3.6.1.4.1.181.2.2.14.1.5 | ScalardsFpFr56TestLed | read-only | mandatory | The current state of the FP TEST LED. The Possible values are: VALUE DESCRIPTION fpLedIndeterminate (1) LED is not present on unit fpLedOff (2) LED is OFF fpLe… |
| 1.3.6.1.4.1.181.2.2.14.1.6 | ScalardsFpFr56DpCtsTxLed | read-only | mandatory | The current state of the FP DP CTS TX LED. The Possible values are: VALUE DESCRIPTION fpLedIndeterminate (1) LED is not present on unit fpLedOff (2) LED is OFF… |
| 1.3.6.1.4.1.181.2.2.14.1.7 | ScalardsFpFr56DpRtsRxLed | read-only | mandatory | The current state of the FP DP RTS RX LED. The Possible values are: VALUE DESCRIPTION fpLedIndeterminate (1) LED is not present on unit fpLedOff (2) LED is OFF… |
| 1.3.6.1.4.1.181.2.2.14.1.8 | ScalardsFpFr56FrLinkLed | read-only | mandatory | The current state of the FP FRAME RELAY LINK LED. The Possible values are: VALUE DESCRIPTION fpLedIndeterminate (1) LED is not present on unit fpLedOff (2) LED… |
| 1.3.6.1.4.1.181.2.2.5005 | NodedsAcOnPowerTransition | A/B On Power Transition on DataSMART 558 and MPATH 538 | ||
| 1.3.6.1.4.1.181.2.2.5006 | NodedsAcOffPowerTransition | A/B Off Power Transition on DataSMART 558 and MPATH 538 | ||
| 1.3.6.1.4.1.181.2.2.9001 | NodedsFmcSetNiRcvUpperBwThresh | The total traffic through the unit has exceeded the configured threshold for NI Receive. | ||
| 1.3.6.1.4.1.181.2.2.9002 | NodedsFmcClrNiRcvUpperBwThresh | The total traffic through the unit has crossed back under 20 percent below the configured threshold after exceeding the threshold for NI Receive. | ||
| 1.3.6.1.4.1.181.2.2.9003 | NodedsFmcSetNiXmtUpperBwThresh | The total traffic through the unit has exceeded the configured threshold for NI Transmit. | ||
| 1.3.6.1.4.1.181.2.2.9004 | NodedsFmcClrNiXmtUpperBwThresh | The total traffic through the unit has crossed back under 20 percent below the configured threshold after exceeding the threshold NI Transmit. | ||
| 1.3.6.1.4.1.181.2.2.9005 | NodedsFmcFpingLinkDown | A VC has transitioned to a link down since FPINGs are not being returned | ||
| 1.3.6.1.4.1.181.2.2.9006 | NodedsFmcFpingLinkUp | A VC has transitioned to a link up since an FPING was just returned |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DisplayString | OCTET STRING | ||
| DLCI | INTEGER (1..1023) |