DC-OPT-MIB
54 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter enterprises Gauge |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.449 | Nodecodex | |||
| 1.3.6.1.4.1.449.2 | NodecdxProductSpecific | |||
| 1.3.6.1.4.1.449.2.1 | Nodecdx6500 | |||
| 1.3.6.1.4.1.449.2.1.3 | Nodecdx6500Statistics | |||
| 1.3.6.1.4.1.449.2.1.3.2 | Nodecdx6500StatOtherStatsGroup | |||
| 1.3.6.1.4.1.449.2.1.3.2.10 | Nodecdx6500DCStatTable | |||
| 1.3.6.1.4.1.449.2.1.3.2.10.1 | Nodecdx6500DCGenStatTable | |||
| 1.3.6.1.4.1.449.2.1.3.2.10.1.1 | Nodecdx6500DCGenStatTableEntry | |||
| 1.3.6.1.4.1.449.2.1.3.2.10.1.1.1 | Scalarcdx6500DCGenStatDSPStatus | read-only | mandatory | This parameter specifies the current status/existence of the DC SIMM/DSP on the motherboard. up - DC SIMM/DSP is installed and operational. down - DC SIMM/DSP … |
| 1.3.6.1.4.1.449.2.1.3.2.10.1.1.2 | Scalarcdx6500DCGenStatHndlrSWRev | read-only | mandatory | This parameter displays the DC Handler Software Revision Number. |
| 1.3.6.1.4.1.449.2.1.3.2.10.1.1.3 | Scalarcdx6500DCGenStatFnctnSWRev | read-only | mandatory | DC Function Revision number. For example, revision number of DSP firmware. |
| 1.3.6.1.4.1.449.2.1.3.2.10.1.1.4 | Scalarcdx6500DCGenStatMaxChannels | read-only | mandatory | Number of DC Channels supported. |
| 1.3.6.1.4.1.449.2.1.3.2.10.1.1.5 | Scalarcdx6500DCGenStatChanInUse | read-only | mandatory | Number of DC Channels in use. |
| 1.3.6.1.4.1.449.2.1.3.2.10.1.1.6 | Scalarcdx6500DCGenStatMaxSmltChanUse | read-only | mandatory | Maximum number of DC Channels in use simultaneously since the last stats reset. |
| 1.3.6.1.4.1.449.2.1.3.2.10.1.1.7 | Scalarcdx6500DCGenStatRejectConn | read-only | mandatory | Number of call requests rejected due to the unavailability of DC channels. |
| 1.3.6.1.4.1.449.2.1.3.2.10.1.1.8 | Scalarcdx6500DCGenStatAggCRatio | read-only | mandatory | Ratio of total number of incoming charactersfor all DC channels to total number of outgoing characters for all channels, for the past minute. |
| 1.3.6.1.4.1.449.2.1.3.2.10.1.1.9 | Scalarcdx6500DCGenStatCurrEncQDepth | read-only | mandatory | Current number of frames in the encoder queue, waiting to be compressed. |
| 1.3.6.1.4.1.449.2.1.3.2.10.1.1.10 | Scalarcdx6500DCGenStatMaxEncQDepth | read-only | mandatory | Maximum number of frames that were on the encoder queue since the last stats reset. |
| 1.3.6.1.4.1.449.2.1.3.2.10.1.1.11 | Scalarcdx6500DCGenStatTmOfMaxEncQDepth | read-only | mandatory | Time when the maximum Encoder Queue Depth is reached. |
| 1.3.6.1.4.1.449.2.1.3.2.10.1.1.12 | Scalarcdx6500DCGenStatCurrDecQDepth | read-only | mandatory | Current number of frames in the decoder queue, waiting to be decompressed. |
| 1.3.6.1.4.1.449.2.1.3.2.10.1.1.13 | Scalarcdx6500DCGenStatMaxDecQDepth | read-only | mandatory | Maximum number of frames that were on the decoder queue waiting to be decompressed. |
| 1.3.6.1.4.1.449.2.1.3.2.10.1.1.14 | Scalarcdx6500DCGenStatTmOfMaxDecQDepth | read-only | mandatory | Time when the maximum Decoder Queue Depth is reached. |
| 1.3.6.1.4.1.449.2.1.3.2.10.2 | Tablecdx6500DCChanStatTable | not-accessible | mandatory | The Data Compression Channel Statistics Table. |
| 1.3.6.1.4.1.449.2.1.3.2.10.2.1 | Rowcdx6500DCChanStatTableEntry | not-accessible | mandatory | Each entry in this table pertains to the Data Compression Channel statistics. |
| 1.3.6.1.4.1.449.2.1.3.2.10.2.1.1 | Columncdx6500DCChanStatChanNum | read-only | mandatory | Channel number whose statistics were requested. |
| 1.3.6.1.4.1.449.2.1.3.2.10.2.1.2 | Columncdx6500DCChanStatTmOfLastStatRst | read-only | mandatory | Time when the node restarted or the stats reset by CTP/SNMP Manager command. |
| 1.3.6.1.4.1.449.2.1.3.2.10.2.1.3 | Columncdx6500DCChanStatChanState | read-only | mandatory | Activity state of the DC channel. dspDown - DSP is down. idle - DSP is ready to be assigned to a connection. negotiating - Source has accepted the Call Request… |
| 1.3.6.1.4.1.449.2.1.3.2.10.2.1.4 | Columncdx6500DCChanStatSourceChan | read-only | mandatory | Access Protocol's identity string. |
| 1.3.6.1.4.1.449.2.1.3.2.10.2.1.5 | Columncdx6500DCChanStatDestChan | read-only | mandatory | Network Protocol's identity string. |
| 1.3.6.1.4.1.449.2.1.3.2.10.2.1.6 | Columncdx6500DCChanStatXmitCRatio | read-only | mandatory | Actual compression ratio for outgoing data. This is a 60 second snapshot. Range is 1 - 9.2 |
| 1.3.6.1.4.1.449.2.1.3.2.10.2.1.7 | Columncdx6500DCChanStatNumOfEncFrames | read-only | mandatory | Number of frames received from the Access Protocol to be compressed. |
| 1.3.6.1.4.1.449.2.1.3.2.10.2.1.8 | Columncdx6500DCChanStatNumOfCharInToEnc | read-only | mandatory | Number of bytes pushed into the encoder to be compressed. |
| 1.3.6.1.4.1.449.2.1.3.2.10.2.1.9 | Columncdx6500DCChanStatNumOfCharOutOfEnc | read-only | mandatory | Number of compressed bytes produced by the encoder. |
| 1.3.6.1.4.1.449.2.1.3.2.10.2.1.10 | Columncdx6500DCChanStatNumOfDecFrames | read-only | mandatory | Number of frames received from the Network Protocol to be decompressed. |
| 1.3.6.1.4.1.449.2.1.3.2.10.2.1.11 | Columncdx6500DCChanStatNumOfCharInToDec | read-only | mandatory | Number of bytes pushed into the decoder to be decompressed. |
| 1.3.6.1.4.1.449.2.1.3.2.10.2.1.12 | Columncdx6500DCChanStatNumOfCharOutOfDec | read-only | mandatory | Number of decompressed bytes produced by the decoder. |
| 1.3.6.1.4.1.449.2.1.3.2.10.2.1.13 | Columncdx6500DCChanStatEncAETrnstnCnt | read-only | mandatory | Number of times the encoder switched from compressed mode to anti-expansion mode. |
| 1.3.6.1.4.1.449.2.1.3.2.10.2.1.14 | Columncdx6500DCChanStatEncAEFrameCnt | read-only | mandatory | Number of anti-expansion frames sent by the encoder. |
| 1.3.6.1.4.1.449.2.1.3.2.10.2.1.15 | Columncdx6500DCChanStatEncAEModeStatus | read-only | mandatory | Anti Expansion mode Status for Encoder : on - Data Compression is in the anti expansion mode. off - Data Compression is out of the anti expansion mode. |
| 1.3.6.1.4.1.449.2.1.3.2.10.2.1.16 | Columncdx6500DCChanStatDecAETrnstnCnt | read-only | mandatory | Number of times the decoder switched from compressed mode to anti-expansion mode. |
| 1.3.6.1.4.1.449.2.1.3.2.10.2.1.17 | Columncdx6500DCChanStatDecAEFrameCnt | read-only | mandatory | Number of anti-expansion frames received by the decoder. |
| 1.3.6.1.4.1.449.2.1.3.2.10.2.1.18 | Columncdx6500DCChanStatDecAEModeStatus | read-only | mandatory | Anti Expansion mode Status for Decoder : on - Data Compression is in the anti expansion mode. off - Data Compression is out of the anti expansion mode. |
| 1.3.6.1.4.1.449.2.1.3.2.10.2.1.19 | Columncdx6500DCChanStatDSWithBadFrames | read-only | mandatory | Number of decoded frames detected by the decoder to have been corrupted. This includes frames with bad headers. |
| 1.3.6.1.4.1.449.2.1.3.2.10.2.1.20 | Columncdx6500DCChanStatDSWithBadHeaders | read-only | mandatory | Number of decoded frames detected by the decoder to have a bad header. |
| 1.3.6.1.4.1.449.2.1.3.2.10.2.1.21 | Columncdx6500DCChanStatDSDueToRstOrCng | read-only | mandatory | Number of packets discarded while processing a X.25 reset or during node congestion. |
| 1.3.6.1.4.1.449.2.1.4 | Nodecdx6500Controls | |||
| 1.3.6.1.4.1.449.2.1.4.9 | Nodecdx6500ContDC | |||
| 1.3.6.1.4.1.449.2.1.4.9.1 | Scalarcdx6500ContResetAllDCStats | write-only | mandatory | Reset the DC Statistics for all channels. |
| 1.3.6.1.4.1.449.2.1.4.9.2 | Tablecdx6500ContDCTable | not-accessible | mandatory | These resets require the channel number as the index. |
| 1.3.6.1.4.1.449.2.1.4.9.2.1 | Rowcdx6500ContDCTableEntry | not-accessible | mandatory | Each entry represents a control parameter used to reset Channel Statistics or Channel Vocabulary. |
| 1.3.6.1.4.1.449.2.1.4.9.2.1.1 | Columncdx6500ContDCChanNum | read-only | mandatory | Channel number used as the index. |
| 1.3.6.1.4.1.449.2.1.4.9.2.1.2 | Columncdx6500ContResetDCChanStats | write-only | mandatory | Reset the DC Statistics for this channel. |
| 1.3.6.1.4.1.449.2.1.4.9.2.1.3 | Columncdx6500ContResetDCChanVocab | write-only | mandatory | Reset the vocabulary/history buffer for this channel if this channel number is active. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DisplayString | OCTET STRING |