MIB Viewer

DCP-LINKVIEW-MIB

28 objects
This is the enterprise specific DCP LINKVIEW MIB for Smartoptics
Imported Objects
DCP-MIBdcpGeneric
SNMPv2-CONFMODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMIGauge32 Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32
SNMPv2-TCDisplayString TEXTUAL-CONVENTION
SO-TC-MIBInterfaceStatus OpticalPower1Decimal
OIDNameAccessStatusDescription
1.3.6.1.4.1.30826.2.2.3IdentitydcpLinkviewThis is the enterprise specific DCP LINKVIEW MIB for Smartoptics
1.3.6.1.4.1.30826.2.2.3.1NodedcpLinkviewObjects
1.3.6.1.4.1.30826.2.2.3.1.1TabledcpLinkviewTablenot-accessiblecurrentDescription.
1.3.6.1.4.1.30826.2.2.3.1.1.1RowdcpLinkviewEntrynot-accessiblecurrentDescription.
1.3.6.1.4.1.30826.2.2.3.1.1.1.1ColumndcpLinkviewIndexnot-accessiblecurrentInterface Index in the following format: csiixy where c: chassis. s: slot number. ii: Interface number. x: 1 = line, 2 = client. y: 0 = tx+rx port, 1 = tx port…
1.3.6.1.4.1.30826.2.2.3.1.1.1.2ColumndcpLinkviewLocalHostnameread-onlycurrentThe hostname of the local system.
1.3.6.1.4.1.30826.2.2.3.1.1.1.3ColumndcpLinkviewLocalNameread-onlycurrentThe local interface name. If no interface this value is empty. if-c/channelid-direction where c = chassis and direction = rx or tx.
1.3.6.1.4.1.30826.2.2.3.1.1.1.4ColumndcpLinkviewLocalStatusread-onlycurrentThe operational state of the local port. idle - The port is not activated. down - The port traffic is lost. up - There is traffic on the port.
1.3.6.1.4.1.30826.2.2.3.1.1.1.5ColumndcpLinkviewLocalPowerread-onlycurrentThe optical power present at the line interface, all wavelengths combined in units of 0.1 dBm.
1.3.6.1.4.1.30826.2.2.3.1.1.1.6ColumndcpLinkviewFiberLossread-onlycurrentThe fiber loss in units of 0.1 dB.
1.3.6.1.4.1.30826.2.2.3.1.1.1.7ColumndcpLinkviewFiberAttenuationread-onlycurrentThe fiber attenuation in units of 0.01 dB/km.
1.3.6.1.4.1.30826.2.2.3.1.1.1.8ColumndcpLinkviewFiberLengthread-onlycurrentThe fiber length in units of 0.1 km.
1.3.6.1.4.1.30826.2.2.3.1.1.1.9ColumndcpLinkviewFiberDispersionread-onlycurrentThe calculated dispersion based on the measured fiber length in units of 1 ps/nm.
1.3.6.1.4.1.30826.2.2.3.1.1.1.10ColumndcpLinkviewFiberTyperead-onlycurrentThe fiber type configured, currently only G.652 is supported.
1.3.6.1.4.1.30826.2.2.3.1.1.1.11ColumndcpLinkviewFiberDispCompread-onlycurrentThe compensated dispersion value by the system in units of 1 ps/nm.
1.3.6.1.4.1.30826.2.2.3.1.1.1.12ColumndcpLinkviewFiberDispFinalread-onlycurrentResidiual(remaning) dispersion in units of 1 ps/nm.
1.3.6.1.4.1.30826.2.2.3.1.1.1.13ColumndcpLinkviewFiberUtilizationread-onlycurrentWavelength utilization of the system in units of %.
1.3.6.1.4.1.30826.2.2.3.1.1.1.14ColumndcpLinkviewRemotePowerread-onlycurrentThe optical power of the remote interface in units of 0.1 dBm.
1.3.6.1.4.1.30826.2.2.3.1.1.1.15ColumndcpLinkviewRemoteNameread-onlycurrentThe remote interface name. If no interface this value is empty. if-c/channelid-direction where c = chassis and direction = rx or tx.
1.3.6.1.4.1.30826.2.2.3.1.1.1.16ColumndcpLinkviewRemoteHostnameread-onlycurrentThe hostname of the remote system.
1.3.6.1.4.1.30826.2.2.3.2NodedcpLinkviewMIBCompliance
1.3.6.1.4.1.30826.2.2.3.2.1NodedcpLinkviewMIBGroups
1.3.6.1.4.1.30826.2.2.3.2.1.1GroupdcpLinkviewTableGroupV1currentThe interface table objects V1.
1.3.6.1.4.1.30826.2.2.3.2.2NodedcpLinkviewMIBCompliances
1.3.6.1.4.1.30826.2.2.3.2.2.1CompliancedcpLinkviewBasicComplV1currentBasic implementation requirements for the DCP-INTERFACE-MIB V1.
Type Definitions
NameSyntaxStatusDescription
DcpFiberAttenuationUnsigned32 (0..10)currentThe fiber attenuation per km with 2 decimals.
DcpFiberLengthUnsigned32 (0..500)currentThe fiber length in km with 1 decimal.
DcpFiberLossUnsigned32 (0..1000)currentThe fiber loss in dB with 1 decimal.