DCP-OCH-MIB
31 objects
This is the enterprise specific DCP OCH MIB for Smartoptics
Imported Objects
| DCP-MIB | dcpGeneric |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Gauge32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString |
| SO-TC-MIB | DcpHundreds DcpTenths InterfaceStatus ItuPerceivedSeverity OchPortMode OpticalPower1Decimal |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.30826.2.2.4 | IdentitydcpOch | This is the enterprise specific DCP OCH MIB for Smartoptics | ||
| 1.3.6.1.4.1.30826.2.2.4.1 | NodedcpOchGeneral | |||
| 1.3.6.1.4.1.30826.2.2.4.1.1 | TabledcpOchGeneralTable | not-accessible | current | A table with general information about the och port. |
| 1.3.6.1.4.1.30826.2.2.4.1.1.1 | RowdcpOchGeneralEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.30826.2.2.4.1.1.1.1 | ColumndcpOchGeneralIndex | not-accessible | current | Port Index in the following format: ccspp where cc: chassis. s: slot number. pp: port number. |
| 1.3.6.1.4.1.30826.2.2.4.1.1.1.2 | ColumndcpOchGeneralPortName | read-only | current | The port name in the following format: och-c/s/port where c = chassis, s = slot, port = port name or ocm-c/s where c = chassis, s = slot |
| 1.3.6.1.4.1.30826.2.2.4.1.1.1.3 | ColumndcpOchGeneralSpacing | read-only | current | The channel spacing used in units of 0.01 GHz. |
| 1.3.6.1.4.1.30826.2.2.4.1.1.1.4 | ColumndcpOchGeneralMaxChannels | read-only | current | The number of channels that is used for the optical power channel plan for the EDFA. |
| 1.3.6.1.4.1.30826.2.2.4.1.1.1.5 | ColumndcpOchGeneralActiveChannels | read-only | current | The number of active channels currently in regulation. |
| 1.3.6.1.4.1.30826.2.2.4.1.1.1.6 | ColumndcpOchGeneralUtilization | read-only | current | The number of channels used in the system in units of %. |
| 1.3.6.1.4.1.30826.2.2.4.1.1.1.7 | ColumndcpOchGeneralConfiguredChannels | read-only | current | The number of channels that are enabled. |
| 1.3.6.1.4.1.30826.2.2.4.2 | NodedcpOchObjects | |||
| 1.3.6.1.4.1.30826.2.2.4.2.1 | TabledcpOchTable | not-accessible | current | A table with all optical channels of the system. |
| 1.3.6.1.4.1.30826.2.2.4.2.1.1 | RowdcpOchEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.30826.2.2.4.2.1.1.1 | ColumndcpOchIndex | not-accessible | current | Och Index in the following format: cspoooy where c: chassis. s: slot number. p: port number. ooo: Och number. y: 0 = tx+rx port, 1 = tx port, 2 = rx port. Same… |
| 1.3.6.1.4.1.30826.2.2.4.2.1.1.2 | ColumndcpOchChannelId | read-only | current | The optical channel id name in the following format: och-c/s/p/och where c = chassis. s = slot number. port = edfa or eq. och = optical channel. |
| 1.3.6.1.4.1.30826.2.2.4.2.1.1.3 | ColumndcpOchRxPower | read-only | current | The optical input power for the optical channel in units of 0.1 dBm. |
| 1.3.6.1.4.1.30826.2.2.4.2.1.1.4 | ColumndcpOchTxPower | read-only | current | The optical output power for the optical channel in units of 0.1 dBm. |
| 1.3.6.1.4.1.30826.2.2.4.2.1.1.5 | ColumndcpOchWssAttenuation | read-only | current | The WSS attenuation for the optical channel in units of 0.1 dB. |
| 1.3.6.1.4.1.30826.2.2.4.2.1.1.6 | ColumndcpOchWssInsertionLoss | read-only | current | The calibration value of WSS insertion loss in units of 0.1 dBm. |
| 1.3.6.1.4.1.30826.2.2.4.2.1.1.7 | ColumndcpOchWantedOutputPower | read-only | current | The wanted optical output power for the optical channel in units of 0.1 dBm. |
| 1.3.6.1.4.1.30826.2.2.4.2.1.1.8 | ColumndcpOchPortMode | read-only | current | The port mode for the channel. Port mode can be on or off. off - The channel is disabled. on - The channel is enabled. edfa - The channel is enabled and connec… |
| 1.3.6.1.4.1.30826.2.2.4.2.1.1.9 | ColumndcpOchStatus | read-only | current | The operational state for a channel. idle - The optical channel is not activated. down - The optical channel traffic is lost. up - There is traffic on the opti… |
| 1.3.6.1.4.1.30826.2.2.4.2.1.1.10 | ColumndcpOchDescription | read-only | current | User configurable description string for the optical channel. |
| 1.3.6.1.4.1.30826.2.2.4.2.1.1.11 | ColumndcpOchAlarm | read-only | current | The highest alarm severity of the optical channel. |
| 1.3.6.1.4.1.30826.2.2.4.3 | NodedcpOchMIBCompliance | |||
| 1.3.6.1.4.1.30826.2.2.4.3.1 | NodedcpOchMIBGroups | |||
| 1.3.6.1.4.1.30826.2.2.4.3.1.1 | GroupdcpOchGeneralTableGroupV1 | current | The och general table objects V1. | |
| 1.3.6.1.4.1.30826.2.2.4.3.1.2 | GroupdcpOchTableGroupV1 | current | The och table objects V1. | |
| 1.3.6.1.4.1.30826.2.2.4.3.2 | NodedcpOchMIBCompliances | |||
| 1.3.6.1.4.1.30826.2.2.4.3.2.1 | CompliancedcpOchBasicComplV1 | current | Basic implementation requirements for the DCP-OCH-MIB V1. |