DDS-MIB
39 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.498.8 | Nodedsu | |||
| 1.3.6.1.4.1.498.8.1 | Nodedds | |||
| 1.3.6.1.4.1.498.8.1.1 | ScalarddsMIBversion | read-only | mandatory | Identifies the version of the MIB. The format of the version is x.yzT, where 'x' identifies the major revision number, 'y'identifies the minor revision number,… |
| 1.3.6.1.4.1.498.8.1.2 | TableddsLineCfgTable | not-accessible | mandatory | The GDC DDS Line Configuration table. Information in the entries of this table defines the configuration of DDS Line. |
| 1.3.6.1.4.1.498.8.1.2.1 | RowddsLineCfgEntry | not-accessible | mandatory | The GDC DDS Line Configuration Table Entry. The information in this entry defines the configuration for the Line of the associated DDS equipment. |
| 1.3.6.1.4.1.498.8.1.2.1.1 | ColumnddsLineCfgIndex | read-only | mandatory | The index value that uniquely identifies the line interface to which this entry is applicable. This has the form of a SCinstance that defines the slot, line, d… |
| 1.3.6.1.4.1.498.8.1.2.1.2 | ColumnddsLineType | read-write | mandatory | Identifies the type of line. The value dds1(1) defines the line type as a conventional DDS. The value ddsSc(2) defines the line type as a DDS line with seconda… |
| 1.3.6.1.4.1.498.8.1.2.1.3 | ColumnddsAutoDataRateDetect | read-only | mandatory | The value autoAsync(11) and autoSync(12) indicates that automatic data rate detection for async or sync communications is in progress. Once the data rate has b… |
| 1.3.6.1.4.1.498.8.1.2.1.4 | ColumnddsDataRate | read-write | mandatory | The DSU data rate option. This object is used to choose the operational data rate of the DSU. The two choices autoAsync(11) and autoSync(12) allow the DSU to a… |
| 1.3.6.1.4.1.498.8.1.2.1.5 | ColumnddsTxClockSource | read-write | mandatory | The DSU transmit clock source option. This is the selection for the transmitter timing clock source. If connecting to a DDS circuit the value of receive(1) mus… |
| 1.3.6.1.4.1.498.8.1.2.1.6 | ColumnddsZeroEncodingCfg | read-write | mandatory | The DSU zero encoding option. This option, for point to point 56k DDS secondary channel circuits, allows the DTE equipment to transmit all '0' octets without v… |
| 1.3.6.1.4.1.498.8.1.2.1.7 | ColumnddsDefaultConfig | read-write | mandatory | The DSU default config option. When the value defaultCfg(2), is selected, the memory of the dataset will be erased, and the DSU configuration will be returned … |
| 1.3.6.1.4.1.498.8.1.3 | TableddsDteCfgTable | not-accessible | mandatory | The DDS DTE Configuration Table. Entries in this table pertain to the DTE interface, regardless of the operating mode (sync/async). |
| 1.3.6.1.4.1.498.8.1.3.1 | RowddsDteCfgEntry | not-accessible | mandatory | The GDC DTE Configuration Table Entry. The information in this entry defines the configuration for the associated DTE. |
| 1.3.6.1.4.1.498.8.1.3.1.1 | ColumnddsDteCfgIndex | read-only | mandatory | An entry in the GDC DDS DTE Configuration Table. |
| 1.3.6.1.4.1.498.8.1.3.1.2 | ColumnddsDteExtBuffClk | read-write | mandatory | The DSU transmit buffer option. An optional elastic transmit buffer is inserted into the data path when a value of external(2) is selected. This elastic buffer… |
| 1.3.6.1.4.1.498.8.1.3.1.3 | ColumnddsDteCfgTxCarrier | read-write | mandatory | The Transmit Carrier option. This is feature allows the DTE equipment to directly control the transmitter carrier via signals on the RTS circuit. Typically, it… |
| 1.3.6.1.4.1.498.8.1.3.1.4 | ColumnddsDteCfgRxCarrier | read-write | mandatory | The Receive Carrier option. This option controls the operation of DCD. It is set to constant for multipoint remote and point to point applications. Switched(2)… |
| 1.3.6.1.4.1.498.8.1.3.1.5 | ColumnddsDteCfgCtsDelay | read-write | mandatory | The CTS delay option. Cts delay option of ctsOn(1) forces both RTS and CTS On regardless of the state of the attached business equipment. The CTS delay option … |
| 1.3.6.1.4.1.498.8.1.3.1.6 | ColumnddsDteCfgLocalDSR | read-write | mandatory | The DSR option. This option controls the operation of DSR. When forceOn(2) is selected, DSR is normally on, if set for followsDTR(1) then DSR is on only when D… |
| 1.3.6.1.4.1.498.8.1.3.1.7 | ColumnddsDteCfgAnaloopDSR | read-write | mandatory | The DSR in Line Loopback (Analoop) option. This option controls DSR during a Line Loopback test. When Line Loopback is active and the ddsDteCfgAnaloopDSR objec… |
| 1.3.6.1.4.1.498.8.1.3.1.8 | ColumnddsDteCfgAasStatus | read-write | mandatory | The Auto-anti Streaming option. A value of enable(1) means that the primary channel DSU transmitter is forced OFF (idle) if the business equipment's (DTE) RTS … |
| 1.3.6.1.4.1.498.8.1.3.1.9 | ColumnddsDteCfgAasTimer | read-write | mandatory | The Auto Anti-Streaming Timer monitor RTS. If RTS remains On for more then the selected time and ddsDteCfgAasStatus is selected for enable(1), the DSU forces O… |
| 1.3.6.1.4.1.498.8.1.3.1.10 | ColumnddsDteCfgCircuitAssurance | read-write | mandatory | The Circuit Assurance option. The enable(2) configures the DSU to clamp CTS upon receiving the following Network codes: 1. IDLE(no DCD) 2. Out of Service Code … |
| 1.3.6.1.4.1.498.8.1.3.1.11 | ColumnddsDteCfgSystemStatus | read-write | mandatory | The System Status option enable(2) configures the DSU to clamp DSR upon receiving the following Network codes: 1. Out of Service Code (OOS) 2. Abnormal Station… |
| 1.3.6.1.4.1.498.8.1.3.1.12 | ColumnddsDteCfgTermaloop | read-write | mandatory | The Loopback Termination Mode. The enable(1) object stops the DSU from looping the DDS network interface while a local loopback is in progress. When the value … |
| 1.3.6.1.4.1.498.8.1.4 | TableddsDteAsyncCfgTable | not-accessible | mandatory | The Asynchronous Configuration table. Information in the entries of this table define the configuration of the DTE interface associated with the DDS device. Th… |
| 1.3.6.1.4.1.498.8.1.4.1 | RowddsDteAsyncCfgEntry | not-accessible | mandatory | The Asynchronous Configuration Table Entry. The information in this entry defines the configuration of the DTE interface. |
| 1.3.6.1.4.1.498.8.1.4.1.1 | ColumnddsDteAsyncCfgIndex | read-only | mandatory | The index value which uniquely identifies the DTE interface to which this entry is applicable. Values for this object have the form of an SCinstance which defi… |
| 1.3.6.1.4.1.498.8.1.4.1.2 | ColumnddsDteAsyncRateAdapt | read-write | mandatory | The Async rate adaption object. The speed relationship between DDS circuit and DTE interface when configured for async communication is defined here. The none(… |
| 1.3.6.1.4.1.498.8.1.4.1.3 | ColumnddsDteAsyncRxDelay | read-write | mandatory | When long(2) is selected, a 40 bit buffer in the receive data path is inserted. This buffer is used to filter out EOT. If ddsDteAsyncTxEOTcfg, and ddsDteAsyncR… |
| 1.3.6.1.4.1.498.8.1.4.1.4 | ColumnddsDteAsyncTxEOTcfg | read-write | mandatory | The configuration of the Transmit End-of-Text. The value enable(1) means that End-of-Text (EOT) will be transmitted. The value disable(2) inhibits EOT transmis… |
| 1.3.6.1.4.1.498.8.1.4.1.5 | ColumnddsDteAsyncRxEOTcfg | read-write | mandatory | The configuration of the Receive End-of-Text. The value enable(1) means that the unit will expect End-of-Text (EOT) and remove it from the data stream. The val… |
| 1.3.6.1.4.1.498.8.1.4.1.6 | ColumnddsDteAsyncOverSpeed | read-write | mandatory | This option is used to determine the amount of asynchronous overspeed the DSU tolerates. The overSpeed1 indicates that the DSU will accept incomming async data… |
| 1.3.6.1.4.1.498.8.1.4.1.7 | ColumnddsDteAsyncCharacterSize | read-write | mandatory | This option selects the Asynchronous word size. The available settings are: 1) 8 bits/character. 2) 9 bits/character. 3) 10 bits/character. 4) 11 bits/characte… |
| 1.3.6.1.4.1.498.8.1.6 | TableddsDteStatusTable | not-accessible | mandatory | The DDS DTE Configuration Table. This entry pertains to the DTE interface. |
| 1.3.6.1.4.1.498.8.1.6.1 | RowddsDteStatusEntry | not-accessible | mandatory | The GDC DTE Configuration Table Entry. This entry defines the configuration for the associated DTE. |
| 1.3.6.1.4.1.498.8.1.6.1.1 | ColumnddsDteStatusIndex | read-only | mandatory | An entry in the GDC DDS DTE Configuration Table. |
| 1.3.6.1.4.1.498.8.1.6.1.2 | ColumnddsDteStatus | read-only | mandatory | Returns a bitwise snapshot of the DTE signals. Octet 1 bit 7 - not used bit 6 - CTS (1:ON; 0:OFF) bit 5 - RTS (1:ON; 0:OFF) bit 4 - DTR (1:ON; 0:OFF) bit 3 - D… |