DEC-ATM-CHASSIS-MIB
94 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.36 | Nodedec | |||
| 1.3.6.1.4.1.36.2 | Nodeema | |||
| 1.3.6.1.4.1.36.2.18 | NodedecMIBextension | |||
| 1.3.6.1.4.1.36.2.18.30 | NodedecAtmChassisMIB | |||
| 1.3.6.1.4.1.36.2.18.30.1 | NodedecAtmChassisMIBObjects | |||
| 1.3.6.1.4.1.36.2.18.30.1.1 | NodedecAtmSysGroup | |||
| 1.3.6.1.4.1.36.2.18.30.1.1.1 | ScalardecAtmSysType | read-only | mandatory | Indicates the overall type of chassis. |
| 1.3.6.1.4.1.36.2.18.30.1.1.2 | ScalardecAtmKeyswitchPosition | read-only | mandatory | Indicates the position of the keyswitch. The keyswitch position determines the type of access allowed to network management and to out-of-band management. For … |
| 1.3.6.1.4.1.36.2.18.30.1.2 | NodedecAtmSlot | |||
| 1.3.6.1.4.1.36.2.18.30.1.2.1 | ScalardecAtmSlotNumber | read-only | mandatory | The number of slots in the box. |
| 1.3.6.1.4.1.36.2.18.30.1.2.2 | ScalardecAtmMasterLinecardSlot | read-only | mandatory | Identifies the slot that the master line card occupies. A value of 0 will be returned if a master has not been chosen, or if the concept of a master line card … |
| 1.3.6.1.4.1.36.2.18.30.1.2.3 | ScalardecAtmStandbyLinecardSlot | read-only | mandatory | Identifies the slot which the standby master occupies. A value of 0 will be returned if a standby master has not been chosen, or if the concept of a standby ma… |
| 1.3.6.1.4.1.36.2.18.30.1.2.4 | TabledecAtmSlotTable | not-accessible | mandatory | Describes the current configuration of the box. |
| 1.3.6.1.4.1.36.2.18.30.1.2.4.1 | RowdecAtmSlotEntry | not-accessible | mandatory | Each entry contains the description and status of one linecard. |
| 1.3.6.1.4.1.36.2.18.30.1.2.4.1.1 | ColumndecAtmSlotIndex | read-only | mandatory | The slot number. Varies from 1 to decAtmSlotNumber. |
| 1.3.6.1.4.1.36.2.18.30.1.2.4.1.2 | ColumndecAtmCardStatus | read-write | mandatory | The status of the card. If the value is read as 'notPresent(1)', then the entire entry should be considered invalid. Writing a value of 'powerDown(2)' will cau… |
| 1.3.6.1.4.1.36.2.18.30.1.2.4.1.3 | ColumndecAtmCardType | read-only | mandatory | The type of the card. |
| 1.3.6.1.4.1.36.2.18.30.1.2.4.1.4 | ColumndecAtmCardHasModPhys | read-only | mandatory | Indicates whether the linecard has modular physical connectors. |
| 1.3.6.1.4.1.36.2.18.30.1.2.4.1.5 | ColumndecAtmCardHwRev | read-only | mandatory | The hardware revision of the card. |
| 1.3.6.1.4.1.36.2.18.30.1.2.4.1.6 | ColumndecAtmCardFwRev | read-only | mandatory | The firmware revision of the card. |
| 1.3.6.1.4.1.36.2.18.30.1.2.4.1.7 | ColumndecAtmCardFault | read-only | mandatory | Contains a diagnostic code which may aid in troubleshooting faulty cards. Meaningless if decAtmCardStatus is not equal to 'fault'. |
| 1.3.6.1.4.1.36.2.18.30.1.3 | NodedecAtmPort | |||
| 1.3.6.1.4.1.36.2.18.30.1.3.1 | TabledecAtmPortTable | not-accessible | mandatory | Describes the current configuration of the box. |
| 1.3.6.1.4.1.36.2.18.30.1.3.1.1 | RowdecAtmPortEntry | not-accessible | mandatory | Each entry describes one physical port. |
| 1.3.6.1.4.1.36.2.18.30.1.3.1.1.1 | ColumndecAtmPortIndex | read-only | mandatory | The port number. Varies from 1 to the number of ATM ports on the linecard. |
| 1.3.6.1.4.1.36.2.18.30.1.3.1.1.2 | ColumndecAtmPortConnector | read-only | mandatory | The type of physical layer hardware currently in use by this ATM port. |
| 1.3.6.1.4.1.36.2.18.30.1.4 | NodedecAtmLed | |||
| 1.3.6.1.4.1.36.2.18.30.1.4.1 | TabledecAtmSlotLedTable | not-accessible | mandatory | A list of LED entries, one for each module LED. |
| 1.3.6.1.4.1.36.2.18.30.1.4.1.1 | RowdecAtmSlotLedEntry | not-accessible | mandatory | Each entry describes the state of one module LED. |
| 1.3.6.1.4.1.36.2.18.30.1.4.1.1.1 | ColumndecAtmSlotLedIndex | read-only | mandatory | Secondary index which allows us to model cards with more than one module LED. The mapping between 'decAtmSlotLedIndex' and physical LEDs will be consistent for… |
| 1.3.6.1.4.1.36.2.18.30.1.4.1.1.2 | ColumndecAtmSlotLedDescr | read-only | mandatory | A textual description of the information which the LED is meant to convey. i.e.: +5 Volt Power, DC Okay ATM port activity. Diagnostic status. |
| 1.3.6.1.4.1.36.2.18.30.1.4.1.1.3 | ColumndecAtmSlotLedProgram | read-only | mandatory | The decAtmSlotLedProgram string is a sequence of instructions for the LED state. The LED constantly repeats the program. Each LED state is represented by a two… |
| 1.3.6.1.4.1.36.2.18.30.1.4.2 | TabledecAtmPortLedTable | not-accessible | mandatory | A list of LED entries, one for each port LED. |
| 1.3.6.1.4.1.36.2.18.30.1.4.2.1 | RowdecAtmPortLedEntry | not-accessible | mandatory | Each entry describes the state of one port LED. |
| 1.3.6.1.4.1.36.2.18.30.1.4.2.1.1 | ColumndecAtmPortLedIndex | read-only | mandatory | Secondary index which lets us model ports with multiple LEDs. |
| 1.3.6.1.4.1.36.2.18.30.1.4.2.1.2 | ColumndecAtmPortLedDescr | read-only | mandatory | A textual description of the information which the LED is meant to convey. i.e.: +5 Volt Power, DC Okay ATM port activity. Diagnostic status. |
| 1.3.6.1.4.1.36.2.18.30.1.4.2.1.3 | ColumndecAtmPortLedProgram | read-only | mandatory | The decAtmLedProgram string is a sequence of instructions for the LED state. The LED constantly repeats the program. Each LED state is represented by a two oct… |
| 1.3.6.1.4.1.36.2.18.30.1.4.3 | ScalardecAtmLedInterestingChanges | read-only | mandatory | This counter may be polled to determine if any interesting changes in the decAtmSlotLedTable or decAtmPortLedTable have occurred. |
| 1.3.6.1.4.1.36.2.18.30.1.5 | NodedecAtmClockCard | |||
| 1.3.6.1.4.1.36.2.18.30.1.5.1 | ScalardecAtmMgmtMemoryAvail | read-only | mandatory | The number of unused bytes of management memory available on the clock card. The management memory is used for storing management parameters. |
| 1.3.6.1.4.1.36.2.18.30.1.5.2 | ScalardecAtmMgmtMemoryAction | read-write | mandatory | This object, when read, returns a value of other(1) unless the switch is in the middle of rewriting management memory. At such times, it will return rewriting(… |
| 1.3.6.1.4.1.36.2.18.30.1.5.3 | ScalardecGigaAtmIntEthPktsSent | read-only | mandatory | The number of packets which the clock card has transmitted over the internal Ethernet. |
| 1.3.6.1.4.1.36.2.18.30.1.5.4 | ScalardecGigaAtmIntEthPktsRcvd | read-only | mandatory | The number of packets which the clock card has received from the internal Ethernet. |
| 1.3.6.1.4.1.36.2.18.30.1.5.5 | ScalardecGigaAtmExtEthPktsSent | read-only | mandatory | The number of packets which the clock card has transmitted over the external Ethernet. |
| 1.3.6.1.4.1.36.2.18.30.1.5.6 | ScalardecGigaAtmExtEthPktsRcvd | read-only | mandatory | The number of packets which the clock card has received from the external Ethernet. |
| 1.3.6.1.4.1.36.2.18.30.1.6 | NodedecAtmPsc | |||
| 1.3.6.1.4.1.36.2.18.30.1.6.1 | ScalardecAtmPscStatus | read-only | mandatory | The status of the Power System Controller (PSC). |
| 1.3.6.1.4.1.36.2.18.30.1.6.2 | ScalardecAtmPscFwRev | read-only | mandatory | The firmware revision of the Power System Controller (PSC). This is only meaningful if the PSC is present. |
| 1.3.6.1.4.1.36.2.18.30.1.6.3 | ScalardecAtmPscHwRev | read-only | mandatory | The hardware revision of the Power System Controller (PSC). This is only meaningful if the PSC is present. |
| 1.3.6.1.4.1.36.2.18.30.1.6.4 | ScalardecAtmPscFwImageStatus | read-only | mandatory | The status of the PSC firmware image. If the value of this object is downloadRequired(2), the manager should download a new firmware image to the PSC. This can… |
| 1.3.6.1.4.1.36.2.18.30.1.6.5 | ScalardecAtmPscBackplaneStatus | read-only | mandatory | The status of the GIGAswitch backplane. |
| 1.3.6.1.4.1.36.2.18.30.1.6.6 | ScalardecAtmPscFaultLedProgram | read-only | mandatory | The decAtmPscFaultLedProgram string is a sequence of instructions for the power supply controller fault LED state. The coding rules are as described for decAtm… |
| 1.3.6.1.4.1.36.2.18.30.1.7 | NodedecAtmPowerSupply | |||
| 1.3.6.1.4.1.36.2.18.30.1.7.1 | TabledecAtmPowerSupplyTable | not-accessible | mandatory | A table describing all of the power supplies for this chassis. |
| 1.3.6.1.4.1.36.2.18.30.1.7.1.1 | RowdecAtmPowerSupplyEntry | not-accessible | mandatory | Each table entry describes one power supply. |
| 1.3.6.1.4.1.36.2.18.30.1.7.1.1.1 | ColumndecAtmPowerIndex | read-only | mandatory | A unique index identifying each power supply. For a GIGAswitch/ATM chassis, the left power supply unit always has index 1, and the right power supply unit alwa… |
| 1.3.6.1.4.1.36.2.18.30.1.7.1.1.2 | ColumndecAtmPowerStatus | read-only | mandatory | The status of the power supply unit. |
| 1.3.6.1.4.1.36.2.18.30.1.7.1.1.3 | ColumndecAtmPowerInputSource | read-only | mandatory | The input source of the power supply. A value of acLine(1) is returned if the power supply is connected to an AC line. A value of dc48V(2) is returned if the p… |
| 1.3.6.1.4.1.36.2.18.30.1.7.1.1.4 | ColumndecAtmPowerVoltage | read-only | mandatory | Voltage of power supply. |
| 1.3.6.1.4.1.36.2.18.30.1.7.1.1.5 | ColumndecAtmPowerOutputInWatts | read-write | mandatory | Output power of power supply, in watts. This is normally read-only. However, the full-sized GIGAswitch/ATM accepts both 15 and 20 amp supplies - and has no way… |
| 1.3.6.1.4.1.36.2.18.30.1.7.1.1.6 | ColumndecAtmPowerFaultLedProgram | read-only | mandatory | The decAtmPowerFaultLedProgram string is a sequence of instructions for the power supply fault LED state. The coding rules are as described for decAtmSlotLedPr… |
| 1.3.6.1.4.1.36.2.18.30.1.7.1.1.7 | ColumndecAtmPowerOkLedProgram | read-only | mandatory | The decAtmPowerOkLedProgram string is a sequence of instructions for the power supply OK LED state. The coding rules are as described for decAtmSlotLedProgram.… |
| 1.3.6.1.4.1.36.2.18.30.1.8 | NodedecAtmBattery | |||
| 1.3.6.1.4.1.36.2.18.30.1.8.1 | ScalardecAtmBatteryStatus | read-only | mandatory | The status of the backup battery. |
| 1.3.6.1.4.1.36.2.18.30.1.8.2 | ScalardecAtmBatteryUsing | read-only | mandatory | The source of power being used for the box. The value batteryPower(2) indicates that the backup battery unit is being used to power the switch. The external po… |
| 1.3.6.1.4.1.36.2.18.30.1.8.3 | ScalardecAtmBatteryCharge | read-only | mandatory | The charge-level of the backup battery. Meaningful only if the battery is present. |
| 1.3.6.1.4.1.36.2.18.30.1.8.4 | ScalardecAtmBatteryTest | read-write | mandatory | This shows the result of the last battery test performed. Testing the battery is risky switched to run off the battery, so if the battery backup subsystem is n… |
| 1.3.6.1.4.1.36.2.18.30.1.9 | NodedecAtmTemperature | |||
| 1.3.6.1.4.1.36.2.18.30.1.9.1 | ScalardecAtmCabinetTemperature | read-only | mandatory | The cabinet temperature. Chassis types which do not have temperature sensors will always return 'noSensor(6)'. |
| 1.3.6.1.4.1.36.2.18.30.1.9.2 | ScalardecAtmTemperatureWarning | read-write | mandatory | The value of this variable determines how the switch will respond to a condition of too high or too low cabinet temperature, or a condition of all fans being i… |
| 1.3.6.1.4.1.36.2.18.30.1.9.3 | ScalardecAtmTemperatureLedProgram | read-only | mandatory | The decAtmTemperatureLedProgram string is a sequence of instructions for the temperature LED state. The coding rules are as described for decAtmSlotLedProgram.… |
| 1.3.6.1.4.1.36.2.18.30.1.10 | NodedecAtmFan | |||
| 1.3.6.1.4.1.36.2.18.30.1.10.1 | ScalardecAtmFanSpeed | read-write | mandatory | The speed of the fans. Set this variable to 'maximum(1)' for maximum cooling where noise does not matter. Set this variable to normal(2) to cause fan speeds to… |
| 1.3.6.1.4.1.36.2.18.30.1.10.2 | TabledecAtmFanTable | not-accessible | mandatory | A table describing all of the fans for this chassis. |
| 1.3.6.1.4.1.36.2.18.30.1.10.2.1 | RowdecAtmFanEntry | not-accessible | mandatory | Each table entry describes one fan. |
| 1.3.6.1.4.1.36.2.18.30.1.10.2.1.1 | ColumndecAtmFanIndex | read-only | mandatory | A unique index identifying each fan. For a GIGAswitch/ATM chassis, the left fan tray always has an index of 1, while the right fan tray always has an index of … |
| 1.3.6.1.4.1.36.2.18.30.1.10.2.1.2 | ColumndecAtmFanStatus | read-only | mandatory | The status of the fan. |
| 1.3.6.1.4.1.36.2.18.30.1.10.2.1.3 | ColumndecAtmFanFaultLedProgram | read-only | mandatory | The decAtmFanFaultLedProgram string is a sequence of instructions for the fan tray fault LED state. The coding rules are as described for decAtmSlotLedProgram.… |
| 1.3.6.1.4.1.36.2.18.30.1.11 | TabledecAtmFppnTable | not-accessible | mandatory | A list of front panel port number to MIB-II interface number mappings. |
| 1.3.6.1.4.1.36.2.18.30.1.11.1 | RowdecAtmFppnEntry | not-accessible | mandatory | Assigns the MIB-II interface ifIndex for a physical datalink (cable) connection to the box. |
| 1.3.6.1.4.1.36.2.18.30.1.11.1.1 | ColumndecAtmFppnSlotNumber | read-only | mandatory | The 1-based slot number of the module. |
| 1.3.6.1.4.1.36.2.18.30.1.11.1.2 | ColumndecAtmFppnPortOfThatSlot | read-only | mandatory | The 1-based media connection to the module. |
| 1.3.6.1.4.1.36.2.18.30.1.11.1.3 | ColumndecAtmFppnIfIndex | read-only | mandatory | The assigned MIB-II ifIndex. For an ATM port, this is the ifIndex of the 'atm' interface, as opposed to the index of the AAL5 entity or the physical (SONET, DS… |
| 1.3.6.1.4.1.36.2.18.30.1.12 | NodedecAtmUpgradeSoftware | |||
| 1.3.6.1.4.1.36.2.18.30.1.12.1 | NodedecAtmLoad | |||
| 1.3.6.1.4.1.36.2.18.30.1.12.1.1 | ScalardecAtmLoadAdminStatus | read-write | mandatory | This object is used to control the program load process of a device. When read, the value other(1) is returned. When set to start-reboot (2) the device reloads… |
| 1.3.6.1.4.1.36.2.18.30.1.12.1.2 | ScalardecAtmLoadOperStatus | read-only | mandatory | The final state of the last load attempt. none(1) indicates that no load has been attempted, ever. This object is non-volatile. It's default value is none(1). |
| 1.3.6.1.4.1.36.2.18.30.1.12.1.3 | ScalardecAtmLoadFilename | read-write | mandatory | The name of the file in which to load. When the device is reading, this is the name of the file to be read. If the device can not check the file name then this… |
| 1.3.6.1.4.1.36.2.18.30.1.12.1.4 | ScalardecAtmLoadIpHostAddr | read-write | mandatory | The IP address of the host from which to load. When the device is reading, this is the IP address of the host in which the read will be directed. When the devi… |
| 1.3.6.1.4.1.36.2.18.30.1.12.1.5 | ScalardecAtmLoadDevSpecific | read-only | mandatory | A device specific parameter which may be used to indicate detailed error information about the last attempted load. This object is non-volatile. |
| 1.3.6.1.4.1.36.2.18.30.1.12.1.6 | ScalardecAtmConfigIpHostAddr | read-write | mandatory | The IP address of the host from which to load. When the device is reading, this is the IP address of the host in which the read will be directed. When the devi… |
| 1.3.6.1.4.1.36.2.18.30.1.12.1.7 | ScalardecAtmConfigDefaultGateway | read-write | mandatory | IP address of default gateway (router) to use if file IP address is off LAN. If this value is NOT set, no default will be used. this object is non-volatile. Th… |
| 1.3.6.1.4.1.36.2.18.30.1.12.1.8 | ScalardecAtmConfigFilename | read-write | mandatory | The name of the file to read or write. When the device is reading, this is the name of the file to be read. When the device is being written, this is the only … |
| 1.3.6.1.4.1.36.2.18.30.1.12.1.9 | ScalardecAtmConfigStatus | read-write | mandatory | This object is used to control the reading and writing of Nvram. When read, the value (1) is returned if no decAtmConfigStatus action has been initiated since … |