DEC-ATM-SIGNALLING-MIB
100 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.36.2.18.34 | NodedecAtmSignallingMIB | |||
| 1.3.6.1.4.1.36.2.18.34.1 | NodedecAtmSignallingMIBObjects | |||
| 1.3.6.1.4.1.36.2.18.34.1.1 | NodedecSignallingGroup | |||
| 1.3.6.1.4.1.36.2.18.34.1.1.1 | TabledecSignallingConfigTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.36.2.18.34.1.1.1.1 | RowdecSignallingConfigEntry | not-accessible | mandatory | Each entry describes one UNI / NNI. Note that the table is indexed by 'atm' interfaces, rather than 'aal5' entities. |
| 1.3.6.1.4.1.36.2.18.34.1.1.1.1.1 | ColumndecAtmSignallingIndex | read-only | mandatory | An arbitrary integer index that can be used to distinguish among multiple signalling entities for the same (physical) interface. |
| 1.3.6.1.4.1.36.2.18.34.1.1.1.1.2 | ColumndecAtmSignallingMode | read-write | mandatory | Indicates the mode in which the port is configured to run. |
| 1.3.6.1.4.1.36.2.18.34.1.2 | NodedecQ2931Group | |||
| 1.3.6.1.4.1.36.2.18.34.1.2.1 | TabledecQ2931MsgTable | not-accessible | mandatory | Describes the number of call/connection processing messages sent and received on each UNI or NNI. |
| 1.3.6.1.4.1.36.2.18.34.1.2.1.1 | RowdecQ2931MsgEntry | not-accessible | mandatory | Each entry contains signalling statistics for one UNI / NNI. Note that the table is indexed by ATM ports (ifType = 'atm') as opposed to AAL5 entities (ifType =… |
| 1.3.6.1.4.1.36.2.18.34.1.2.1.1.1 | ColumncallProceedingTx | read-only | mandatory | The number of CALL PROCEEDING messages transmitted on this interface. |
| 1.3.6.1.4.1.36.2.18.34.1.2.1.1.2 | ColumncallProceedingRx | read-only | mandatory | The number of CALL PROCEEDING messages received on this interface. |
| 1.3.6.1.4.1.36.2.18.34.1.2.1.1.3 | ColumnconnectTx | read-only | mandatory | The number of CONNECT messages transmitted on this interface. |
| 1.3.6.1.4.1.36.2.18.34.1.2.1.1.4 | ColumnconnectRx | read-only | mandatory | The number of CONNECT messages received on this interface. |
| 1.3.6.1.4.1.36.2.18.34.1.2.1.1.5 | ColumnconnectAcknowledgeTx | read-only | mandatory | The number of CONNECT ACKNOWLEDGE messages transmitted on this interface. |
| 1.3.6.1.4.1.36.2.18.34.1.2.1.1.6 | ColumnconnectAcknowledgeRx | read-only | mandatory | The number of CONNECT ACKNOWLEDGE messages received on this interface. |
| 1.3.6.1.4.1.36.2.18.34.1.2.1.1.7 | ColumnsetupTx | read-only | mandatory | The number of SETUP messages transmitted on this interface. |
| 1.3.6.1.4.1.36.2.18.34.1.2.1.1.8 | ColumnsetupRx | read-only | mandatory | The number of SETUP messages received on this interface. |
| 1.3.6.1.4.1.36.2.18.34.1.2.1.1.9 | ColumnreleaseTx | read-only | mandatory | The number of RELEASE messages transmitted on this interface. |
| 1.3.6.1.4.1.36.2.18.34.1.2.1.1.10 | ColumnreleaseRx | read-only | mandatory | The number of RELEASE messages received on this interface. |
| 1.3.6.1.4.1.36.2.18.34.1.2.1.1.11 | ColumnreleaseCompleteTx | read-only | mandatory | The number of RELEASE COMPLETE messages transmitted on this interface. |
| 1.3.6.1.4.1.36.2.18.34.1.2.1.1.12 | ColumnreleaseCompleteRx | read-only | mandatory | The number of RELEASE COMPLETE messages received on this interface. |
| 1.3.6.1.4.1.36.2.18.34.1.2.1.1.13 | ColumnrestartTx | read-only | mandatory | The number of RESTART messages transmitted on this interface. |
| 1.3.6.1.4.1.36.2.18.34.1.2.1.1.14 | ColumnrestartRx | read-only | mandatory | The number of RESTART messages received on this interface. |
| 1.3.6.1.4.1.36.2.18.34.1.2.1.1.15 | ColumnrestartAcknowledgeTx | read-only | mandatory | The number of RESTART ACKNOWLEDGE messages transmitted on this interface. |
| 1.3.6.1.4.1.36.2.18.34.1.2.1.1.16 | ColumnrestartAcknowledgeRx | read-only | mandatory | The number of RESTART ACKNOWLEDGE messages received on this interface. |
| 1.3.6.1.4.1.36.2.18.34.1.2.1.1.17 | ColumnstatusTx | read-only | mandatory | The number of STATUS messages transmitted on this interface. |
| 1.3.6.1.4.1.36.2.18.34.1.2.1.1.18 | ColumnstatusRx | read-only | mandatory | The number of STATUS messages received on this interface. |
| 1.3.6.1.4.1.36.2.18.34.1.2.1.1.19 | ColumnstatusEnquiryTx | read-only | mandatory | The number of STATUS ENQUIRY messages transmitted on this interface. |
| 1.3.6.1.4.1.36.2.18.34.1.2.1.1.20 | ColumnstatusEnquiryRx | read-only | mandatory | The number of STATUS ENQUIRY messages received on this interface. |
| 1.3.6.1.4.1.36.2.18.34.1.2.1.1.21 | ColumnaddPartyTx | read-only | mandatory | The number of ADD PARTY messages transmitted on this interface. |
| 1.3.6.1.4.1.36.2.18.34.1.2.1.1.22 | ColumnaddPartyRx | read-only | mandatory | The number of ADD PARTY messages received on this interface. |
| 1.3.6.1.4.1.36.2.18.34.1.2.1.1.23 | ColumnaddPartyAcknowledgeTx | read-only | mandatory | The number of ADD PARTY ACKNOWLEDGE messages transmitted on this interface. |
| 1.3.6.1.4.1.36.2.18.34.1.2.1.1.24 | ColumnaddPartyAcknowledgeRx | read-only | mandatory | The number of ADD PARTY ACKNOWLEDGE messages received on this interface. |
| 1.3.6.1.4.1.36.2.18.34.1.2.1.1.25 | ColumnaddPartyRejectTx | read-only | mandatory | The number of ADD PARTY REJECT messages transmitted on this interface. |
| 1.3.6.1.4.1.36.2.18.34.1.2.1.1.26 | ColumnaddPartyRejectRx | read-only | mandatory | The number of ADD PARTY REJECT messages received on this interface. |
| 1.3.6.1.4.1.36.2.18.34.1.2.1.1.27 | ColumndropPartyTx | read-only | mandatory | The number of DROP PARTY messages transmitted on this interface. |
| 1.3.6.1.4.1.36.2.18.34.1.2.1.1.28 | ColumndropPartyRx | read-only | mandatory | The number of DROP PARTY messages received on this interface. |
| 1.3.6.1.4.1.36.2.18.34.1.2.1.1.29 | ColumndropPartyAcknowledgeTx | read-only | mandatory | The number of DROP PARTY ACKNOWLEDGE messages transmitted on this interface. |
| 1.3.6.1.4.1.36.2.18.34.1.2.1.1.30 | ColumndropPartyAcknowledgeRx | read-only | mandatory | The number of DROP PARTY ACKNOWLEDGE messages received on this interface. |
| 1.3.6.1.4.1.36.2.18.34.1.2.2 | TabledecQ2931StatusTable | not-accessible | mandatory | Contains additional Q2931 signalling statistics. |
| 1.3.6.1.4.1.36.2.18.34.1.2.2.1 | RowdecQ2931StatusEntry | not-accessible | mandatory | Each entry contains signalling statistics for one UNI / NNI. Note that the table is indexed by ATM ports (ifType = 'atm') as opposed to AAL5 entities (ifType =… |
| 1.3.6.1.4.1.36.2.18.34.1.2.2.1.1 | ColumntotalConns | read-only | mandatory | The total number of connections established so far. |
| 1.3.6.1.4.1.36.2.18.34.1.2.2.1.2 | ColumnactiveConns | read-only | mandatory | The number of currently-active connections. |
| 1.3.6.1.4.1.36.2.18.34.1.2.2.1.3 | ColumnlastTxCause | read-only | mandatory | The most recently transmitted cause code. |
| 1.3.6.1.4.1.36.2.18.34.1.2.2.1.4 | ColumnlastTxDiagnostic | read-only | mandatory | The most recently transmitted diagnostic code. |
| 1.3.6.1.4.1.36.2.18.34.1.2.2.1.5 | ColumnlastRxCause | read-only | mandatory | The most recently received cause code. |
| 1.3.6.1.4.1.36.2.18.34.1.2.2.1.6 | ColumnlastRxDiagnostic | read-only | mandatory | The most recently received diagnostic code. |
| 1.3.6.1.4.1.36.2.18.34.1.2.3 | TabledecQ2931TimerTable | not-accessible | mandatory | Allows network managers to examine and configure the timers used for Q.2931 call processing. |
| 1.3.6.1.4.1.36.2.18.34.1.2.3.1 | RowdecQ2931TimerEntry | not-accessible | mandatory | Each entry contains timers for one UNI / NNI. Note that the table is indexed by ATM ports (ifType = 'atm') as opposed to AAL5 entities (ifType = 'aal5'). Sorry… |
| 1.3.6.1.4.1.36.2.18.34.1.2.3.1.1 | Columnt303 | read-only | mandatory | SETUP message timeout, in seconds. |
| 1.3.6.1.4.1.36.2.18.34.1.2.3.1.2 | Columnt308 | read-only | mandatory | RELEASE message timeout, in seconds. |
| 1.3.6.1.4.1.36.2.18.34.1.2.3.1.3 | Columnt309 | read-only | mandatory | SAAL disconnection timeout, in seconds. |
| 1.3.6.1.4.1.36.2.18.34.1.2.3.1.4 | Columnt310 | read-only | mandatory | CALL PROCEEDING timeout, in seconds. |
| 1.3.6.1.4.1.36.2.18.34.1.2.3.1.5 | Columnt313 | read-only | mandatory | CONNECT timeout, in seconds. This timer is only used on the User side of a UNI. |
| 1.3.6.1.4.1.36.2.18.34.1.2.3.1.6 | Columnt316 | read-only | mandatory | RESTART timeout, in seconds. |
| 1.3.6.1.4.1.36.2.18.34.1.2.3.1.7 | Columnt317 | read-only | mandatory | RESTART reply timeout, in seconds. This should be less than the value for timer 't316'. |
| 1.3.6.1.4.1.36.2.18.34.1.2.3.1.8 | Columnt322 | read-only | mandatory | STATUS ENQUIRY timeout, in seconds. |
| 1.3.6.1.4.1.36.2.18.34.1.2.3.1.9 | Columnt398 | read-only | mandatory | DROP PARTY timeout, in seconds. |
| 1.3.6.1.4.1.36.2.18.34.1.2.3.1.10 | Columnt399 | read-only | mandatory | ADD PARTY timeout, in seconds. |
| 1.3.6.1.4.1.36.2.18.34.1.3 | NodedecQSaalGroup | |||
| 1.3.6.1.4.1.36.2.18.34.1.3.1 | TabledecQSaalMsgTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.36.2.18.34.1.3.1.1 | RowdecQSaalMsgEntry | not-accessible | mandatory | Each entry contains signalling statistics for one UNI / NNI. Note that the table is indexed by ATM ports (ifType = 'atm') as opposed to AAL5 entities (ifType =… |
| 1.3.6.1.4.1.36.2.18.34.1.3.1.1.1 | ColumntxDiscardedSdus | read-only | mandatory | The number of outgoing SDUs which were discarded. |
| 1.3.6.1.4.1.36.2.18.34.1.3.1.1.2 | ColumnrxErrorPdus | read-only | mandatory | The number of incoming PDUs which could not be received due to errors. |
| 1.3.6.1.4.1.36.2.18.34.1.3.1.1.3 | ColumntxErrorPdus | read-only | mandatory | The number of transmission errors for outgoing PDUs. |
| 1.3.6.1.4.1.36.2.18.34.1.3.1.1.4 | ColumnrxDiscardedPdus | read-only | mandatory | The number of incoming PDUs which were discarded. |
| 1.3.6.1.4.1.36.2.18.34.1.3.1.1.5 | ColumntxDiscardedPdus | read-only | mandatory | The number of outgoing PDUs which were discarded. |
| 1.3.6.1.4.1.36.2.18.34.1.3.1.1.6 | ColumnbgnTx | read-only | mandatory | The number of BGN (Request Initialization) messages transmitted over the interface. |
| 1.3.6.1.4.1.36.2.18.34.1.3.1.1.7 | ColumnbgnRx | read-only | mandatory | The number of BGN (Request Initialization) messages received over the interface. |
| 1.3.6.1.4.1.36.2.18.34.1.3.1.1.8 | ColumnbgakTx | read-only | mandatory | The number of BGAK (Request Acknowledgement) messages transmitted over the interface. |
| 1.3.6.1.4.1.36.2.18.34.1.3.1.1.9 | ColumnbgakRx | read-only | mandatory | The number of BGAK (Request Acknowledgement) messages received over the interface. |
| 1.3.6.1.4.1.36.2.18.34.1.3.1.1.10 | ColumnendTx | read-only | mandatory | The number of END (Disconnect Command) messages transmitted over the interface. |
| 1.3.6.1.4.1.36.2.18.34.1.3.1.1.11 | ColumnendRx | read-only | mandatory | The number of END (Disconnect Command) messages received over the interface. |
| 1.3.6.1.4.1.36.2.18.34.1.3.1.1.12 | ColumnendakTx | read-only | mandatory | The number of ENDAK (Disconnect Acknowledgement) messages transmitted over the interface. |
| 1.3.6.1.4.1.36.2.18.34.1.3.1.1.13 | ColumnendakRx | read-only | mandatory | The number of ENDAK (Disconnect Acknowledgement) messages received over the interface. |
| 1.3.6.1.4.1.36.2.18.34.1.3.1.1.14 | ColumnrsTx | read-only | mandatory | The number of RS (Resynchronization Command) messages transmitted over the interface. |
| 1.3.6.1.4.1.36.2.18.34.1.3.1.1.15 | ColumnrsRx | read-only | mandatory | The number of RS (Resynchronization Command) messages received over the interface. |
| 1.3.6.1.4.1.36.2.18.34.1.3.1.1.16 | ColumnrsakTx | read-only | mandatory | The number of RSAK (Resynchronization Acknowledgement) messages transmitted over the interface. |
| 1.3.6.1.4.1.36.2.18.34.1.3.1.1.17 | ColumnrsakRx | read-only | mandatory | The number of RSAK (Resynchronization Acknowledgement) messages received over the interface. |
| 1.3.6.1.4.1.36.2.18.34.1.3.1.1.18 | ColumnbgrejTx | read-only | mandatory | The number of BGREJ (Connection Reject) messages transmitted over the interface. |
| 1.3.6.1.4.1.36.2.18.34.1.3.1.1.19 | ColumnbgrejRx | read-only | mandatory | The number of BGREJ (Connection Reject) messages received over the interface. |
| 1.3.6.1.4.1.36.2.18.34.1.3.1.1.20 | ColumnsdTx | read-only | mandatory | The number of SD (Sequenced Connection-Mode Data) messages transmitted over the interface. |
| 1.3.6.1.4.1.36.2.18.34.1.3.1.1.21 | ColumnsdRx | read-only | mandatory | The number of SD (Sequenced Connection-Mode Data) messages received over the interface. |
| 1.3.6.1.4.1.36.2.18.34.1.3.1.1.22 | ColumnsdpTx | read-only | mandatory | The number of SDP (Sequenced Connection-Mode Data with request for Receive State Information) messages transmitted over the interface. This object only applies… |
| 1.3.6.1.4.1.36.2.18.34.1.3.1.1.23 | ColumnsdpRx | read-only | mandatory | The number of SDP (Sequenced Connection-Mode Data with request for Receive State Information) messages received over the interface. This object only applies to… |
| 1.3.6.1.4.1.36.2.18.34.1.3.1.1.24 | ColumnerTx | read-only | mandatory | The number of ER (Recovery Command) messages transmitted over the interface. This object is not applicable to UNI 3.0. |
| 1.3.6.1.4.1.36.2.18.34.1.3.1.1.25 | ColumnerRx | read-only | mandatory | The number of ER (Recovery Command) messages received over the interface. This object is not applicable to UNI 3.0. |
| 1.3.6.1.4.1.36.2.18.34.1.3.1.1.26 | ColumnpollTx | read-only | mandatory | The number of POLL (Transmitter State Information with request for Receive State Information) messages transmitted over the interface. |
| 1.3.6.1.4.1.36.2.18.34.1.3.1.1.27 | ColumnpollRx | read-only | mandatory | The number of POLL (Transmitter State Information with request for Receive State Information) messages received over the interface. |
| 1.3.6.1.4.1.36.2.18.34.1.3.1.1.28 | ColumnstatTx | read-only | mandatory | The number of STAT (Solicited Receiver State Information) messages transmitted over the interface. |
| 1.3.6.1.4.1.36.2.18.34.1.3.1.1.29 | ColumnstatRx | read-only | mandatory | The number of STAT (Solicited Receiver State Information) messages received over the interface. |
| 1.3.6.1.4.1.36.2.18.34.1.3.1.1.30 | ColumnustatTx | read-only | mandatory | The number of USTAT (Unsolicited Receiver State Info) messages transmitted over the interface. |
| 1.3.6.1.4.1.36.2.18.34.1.3.1.1.31 | ColumnustatRx | read-only | mandatory | The number of USTAT (Unsolicited Receiver State Info) messages received over the interface. |
| 1.3.6.1.4.1.36.2.18.34.1.3.1.1.32 | ColumnudTx | read-only | mandatory | The number of UD (Unnumbered User Data) messages transmitted over the interface. |
| 1.3.6.1.4.1.36.2.18.34.1.3.1.1.33 | ColumnudRx | read-only | mandatory | The number of UD (Unnumbered User Data) messages received over the interface. |
| 1.3.6.1.4.1.36.2.18.34.1.3.1.1.34 | ColumnmdTx | read-only | mandatory | The number of MD (Unnumbered Management Data) messages transmitted over the interface. |
| 1.3.6.1.4.1.36.2.18.34.1.3.1.1.35 | ColumnmdRx | read-only | mandatory | The number of MD (Unnumbered Management Data) messages received over the interface. |
| 1.3.6.1.4.1.36.2.18.34.1.3.1.1.36 | ColumnerakTx | read-only | mandatory | The number of ERAK (Recovery Acknowledgement) messages transmitted over the interface. This object is not applicable to UNI 3.0. |
| 1.3.6.1.4.1.36.2.18.34.1.3.1.1.37 | ColumnerakRx | read-only | mandatory | The number of ERAK (Recovery Acknowledgement) messages received over the interface. This object is not applicable to UNI 3.0. |