DECHUB900-COMMON-MIB-V3-0
137 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.36 | Nodedec | |||
| 1.3.6.1.4.1.36.2 | Nodeema | |||
| 1.3.6.1.4.1.36.2.18 | NodedecMIBextension | |||
| 1.3.6.1.4.1.36.2.18.11 | NodedecHub900 | |||
| 1.3.6.1.4.1.36.2.18.11.2 | NodepubCommon | |||
| 1.3.6.1.4.1.36.2.18.11.2.1 | NodepcomSlot | |||
| 1.3.6.1.4.1.36.2.18.11.2.1.1 | ScalarpcomOperStatus | read-only | mandatory | Describes the current operational state of the device. Operational status may be expressed as one of the following: enabled(1) - indicates that the device in o… |
| 1.3.6.1.4.1.36.2.18.11.2.1.2 | ScalarpcomAdminStatus | read-write | mandatory | enabled(1) - setting this object to enabled causes the device to begin it's power up sequence and attempt to enter its operational state. If the value of this … |
| 1.3.6.1.4.1.36.2.18.11.2.1.3 | ScalarpcomDiagFailure | read-only | mandatory | This object contains the results of power-on self test. When zero, the unit passed self test okay. When non-zero and pcomOperStatus indicates a failure the val… |
| 1.3.6.1.4.1.36.2.18.11.2.1.4 | ScalarpcomSerialNumber | read-write | mandatory | Serial number for the module. This variable is set to a zero length string initially. Users may store a serial number for the module. The value of this object … |
| 1.3.6.1.4.1.36.2.18.11.2.1.5 | ScalarpcomSlotNumber | read-only | mandatory | Number of the slot in which module is inserted, as indicated by pins on the backplane connector. If module is not inserted in a hub the value of this object is… |
| 1.3.6.1.4.1.36.2.18.11.2.1.6 | ScalarpcomEsn | read-only | mandatory | Extended Slot Number assigned to module. An ESN is a 32-bit integer which has a decimal representation that indicates the physical connectivity of both local a… |
| 1.3.6.1.4.1.36.2.18.11.2.2 | NodepcomHub | |||
| 1.3.6.1.4.1.36.2.18.11.2.2.1 | ScalarpcomHubId | read-only | deprecated | A 6-byte unique identifier. The HubId is assigned to the component by hub manager when the new component is recognized. The initial HubId is zero. The componen… |
| 1.3.6.1.4.1.36.2.18.11.2.2.2 | ScalarpcomHubIpAddress | read-only | mandatory | The IP address used to reach to Hub Manager via the MAC implemented by the component. This is initialized to all zeros (0.0.0.0) at reset. There is an internal… |
| 1.3.6.1.4.1.36.2.18.11.2.2.3 | ScalarpcomHubCommunity | read-only | mandatory | The public read-only SNMP community string used by the Hub Manager. This value is initialized to the null (zero-length) string at reset. There is an internal r… |
| 1.3.6.1.4.1.36.2.18.11.2.3 | NodepcomLed | |||
| 1.3.6.1.4.1.36.2.18.11.2.3.1 | TablepcomLedTable | not-accessible | mandatory | A list of led entries, one for led on the device. |
| 1.3.6.1.4.1.36.2.18.11.2.3.1.1 | RowpcomLedEntry | not-accessible | mandatory | Values for a led. |
| 1.3.6.1.4.1.36.2.18.11.2.3.1.1.1 | ColumnpcomLedIndex | read-only | mandatory | Index into the table. |
| 1.3.6.1.4.1.36.2.18.11.2.3.1.1.2 | ColumnpcomLedDescr | read-only | mandatory | A textual description of the information which the LED is meant to convey. i.e.: +5 Volt Power, DC Okay Ethernet segment activity. Diagnostic status. |
| 1.3.6.1.4.1.36.2.18.11.2.3.1.1.3 | ColumnpcomLedProgram | read-only | mandatory | The pcomLedProgram string is a sequence of instructions for the LED state. The LED constantly repeats the program. Each LED state is represented by a two octet… |
| 1.3.6.1.4.1.36.2.18.11.2.3.2 | ScalarpcomLedInterestingChanges | read-only | mandatory | This counter may be polled to determine if any 'interesting changes' in the pcomLedTable have occurred. Changes that meet the criteria of 'interesting' are def… |
| 1.3.6.1.4.1.36.2.18.11.2.4 | NodepcomLoad | |||
| 1.3.6.1.4.1.36.2.18.11.2.4.1 | ScalarpcomLoadAdminStatus | read-write | mandatory | This object is used to control the program load process of a device. When read, the value other(1) is returned. When set to start-read(2) the device initiates … |
| 1.3.6.1.4.1.36.2.18.11.2.4.2 | ScalarpcomLoadOperStatus | read-only | mandatory | The final state of the last load attempt. none(1) indicates that no load has been attempted, ever. This object is non-volatile. It's default value is none(1). |
| 1.3.6.1.4.1.36.2.18.11.2.4.3 | ScalarpcomLoadFilename | read-write | mandatory | The name of the file in which to load. When the device is reading, this is the name of the file to be read. When the device is being written, this is the only … |
| 1.3.6.1.4.1.36.2.18.11.2.4.4 | ScalarpcomLoadIpHostAddr | read-write | mandatory | The IP address of the host from which to load. When the device is reading, this is the IP address of the host in which the read will be directed. When the devi… |
| 1.3.6.1.4.1.36.2.18.11.2.4.5 | ScalarpcomLoadDevSpecific | read-only | mandatory | A device specific parameter which may be used to indicate detailed error information about the last attempted load. A value of zero indicates that no load has … |
| 1.3.6.1.4.1.36.2.18.11.2.4.6 | ScalarpcomLoadTftpDirection | read-only | mandatory | This device-specific object represents the TFTP capability of the device, in relation to its Management Agent Module (MAM). The TFTP protocol allows initiation… |
| 1.3.6.1.4.1.36.2.18.11.2.5 | NodepcomSnmpAuth | |||
| 1.3.6.1.4.1.36.2.18.11.2.5.1 | NodepcomSnmpAuthTrap | |||
| 1.3.6.1.4.1.36.2.18.11.2.5.1.1 | ScalarpcomSnmpAuthTrapCommunity | read-write | mandatory | The community string used in SNMP Trap PDUs. This value is initially 'public'. |
| 1.3.6.1.4.1.36.2.18.11.2.5.1.2 | TablepcomSnmpAuthTrapUserTable | not-accessible | mandatory | A list of IP addresses to which traps will be sent and an associated row creation/deletion object. |
| 1.3.6.1.4.1.36.2.18.11.2.5.1.2.1 | RowpcomSnmpAuthTrapUserEntry | not-accessible | mandatory | Objects containing information for a given trap address. Rows are created when pcomSnmpAuthTrapAddr is set, and deleted when pcomSnmpAuthTrapUserStatus is set … |
| 1.3.6.1.4.1.36.2.18.11.2.5.1.2.1.1 | ColumnpcomSnmpAuthTrapUserAddr | read-write | mandatory | An IP Address to which all SNMP Trap messages will be sent. |
| 1.3.6.1.4.1.36.2.18.11.2.5.1.2.1.2 | ColumnpcomSnmpAuthTrapUserStatus | read-write | mandatory | Writing invalid(2) to this object removes the corresponding entry. When read, this object always returns a value of other(1). |
| 1.3.6.1.4.1.36.2.18.11.2.5.2 | NodepcomSnmpAuthReadOnly | |||
| 1.3.6.1.4.1.36.2.18.11.2.5.2.1 | ScalarpcomSnmpAuthReadOnlyCommunity | read-write | mandatory | The community string used to identify an SNMP community with access rights of read-only. This value is initially 'public'. |
| 1.3.6.1.4.1.36.2.18.11.2.5.2.2 | TablepcomSnmpAuthReadOnlyUserTable | not-accessible | mandatory | A list of Read-only users and associated information. |
| 1.3.6.1.4.1.36.2.18.11.2.5.2.2.1 | RowpcomSnmpAuthReadOnlyUserEntry | not-accessible | mandatory | Objects containing information for a given Read-only user. Rows are created when pcomSnmpAuthReadOnlyUserAddr is set, and deleted when pcomSnmpAuthReadOnlyUser… |
| 1.3.6.1.4.1.36.2.18.11.2.5.2.2.1.1 | ColumnpcomSnmpAuthReadOnlyUserAddr | read-write | mandatory | An IP Address, or a set of IP addresses, which has Read-only SNMP access to this agent. If this object is used as a wildcard, bits corresponding to the zero bi… |
| 1.3.6.1.4.1.36.2.18.11.2.5.2.2.1.2 | ColumnpcomSnmpAuthReadOnlyUserMask | read-write | mandatory | UserMask is used to provide 'wildcard' authorized users. It is a 32-bit mask which is applied to (ANDed with) the source IP address of an incoming SNMP message… |
| 1.3.6.1.4.1.36.2.18.11.2.5.2.2.1.3 | ColumnpcomSnmpAuthReadOnlyUserStatus | read-write | mandatory | Writing invalid(2) to this object removes the corresponding entry. When read, this object always returns a value of other(1). |
| 1.3.6.1.4.1.36.2.18.11.2.5.3 | NodepcomSnmpAuthReadWrite | |||
| 1.3.6.1.4.1.36.2.18.11.2.5.3.1 | ScalarpcomSnmpAuthReadWriteCommunity | read-write | mandatory | The community string used to identify an SNMP community with access rights of Read-Write. Note, this object may only be read or written using the read-write co… |
| 1.3.6.1.4.1.36.2.18.11.2.5.3.2 | TablepcomSnmpAuthReadWriteUserTable | not-accessible | mandatory | A list of Read-Write users and associated information. |
| 1.3.6.1.4.1.36.2.18.11.2.5.3.2.1 | RowpcomSnmpAuthReadWriteUserEntry | not-accessible | mandatory | Objects containing information for a given Read-Write user. Rows are created when pcomSnmpAuthReadWriteUserAddr is set, and deleted when pcomSnmpAuthReadWriteU… |
| 1.3.6.1.4.1.36.2.18.11.2.5.3.2.1.1 | ColumnpcomSnmpAuthReadWriteUserAddr | read-write | mandatory | An IP Address, or a set of IP addresses, which has Read-Write SNMP access to this agent. If this object is used as a wildcard, bits corresponding to the zero b… |
| 1.3.6.1.4.1.36.2.18.11.2.5.3.2.1.2 | ColumnpcomSnmpAuthReadWriteUserMask | read-write | mandatory | UserMask is used to provide 'wildcard' authorized users. It is a 32-bit mask which is applied to (ANDed with) the source IP address of an incoming SNMP message… |
| 1.3.6.1.4.1.36.2.18.11.2.5.3.2.1.3 | ColumnpcomSnmpAuthReadWriteUserStatus | read-write | mandatory | Writing invalid(2) to this object removes the corresponding entry. When read, this object always returns a value of other(1). Note, this object may only be rea… |
| 1.3.6.1.4.1.36.2.18.11.2.5.4 | NodepcomSnmpAuthUnauth | |||
| 1.3.6.1.4.1.36.2.18.11.2.5.4.1 | TablepcomSnmpAuthUnauthTable | not-accessible | mandatory | A list of unauthorized user entries. |
| 1.3.6.1.4.1.36.2.18.11.2.5.4.1.1 | RowpcomSnmpAuthUnauthEntry | not-accessible | mandatory | An unauthorized user entry containing information common to a single case where an snmp management message for not authorized. |
| 1.3.6.1.4.1.36.2.18.11.2.5.4.1.1.1 | ColumnpcomSnmpAuthUnauthIndex | read-only | mandatory | A unique integer used to index this table. |
| 1.3.6.1.4.1.36.2.18.11.2.5.4.1.1.2 | ColumnpcomSnmpAuthUnauthTimeStamp | read-only | mandatory | The value of sysUpTime when the message was unauthenticated. |
| 1.3.6.1.4.1.36.2.18.11.2.5.4.1.1.3 | ColumnpcomSnmpAuthUnauthIpAddress | read-only | mandatory | The IP address upon which the unauthenticated message arrived. |
| 1.3.6.1.4.1.36.2.18.11.2.5.4.1.1.4 | ColumnpcomSnmpAuthUnauthUdpPort | read-only | mandatory | The UDP port number upon which the unauthenticated message arrived. |
| 1.3.6.1.4.1.36.2.18.11.2.5.4.1.1.5 | ColumnpcomSnmpAuthUnauthCommunity | read-only | mandatory | The community string present in the unauthenticated message. Only the only the first 32 octets of the community string are kept. |
| 1.3.6.1.4.1.36.2.18.11.2.5.4.1.1.6 | ColumnpcomSnmpAuthUnauthOperation | read-only | mandatory | The attempted operation. |
| 1.3.6.1.4.1.36.2.18.11.2.5.4.1.1.7 | ColumnpcomSnmpAuthUnauthReason | read-only | mandatory | The reason for failing to authenticate the message. A value of badComName(1) indicates that the community string in the failed message does not match a communi… |
| 1.3.6.1.4.1.36.2.18.11.2.6 | NodepcomErrLog | |||
| 1.3.6.1.4.1.36.2.18.11.2.6.1 | ScalarpcomErrLogNumEntries | read-only | mandatory | The number of entries in the pcomErrLogTable. The value of this object is initially zero. It is incremented as pcomErrLogEntries are added, to a maximum value.… |
| 1.3.6.1.4.1.36.2.18.11.2.6.2 | TablepcomErrLogTable | not-accessible | mandatory | A table which describes errors encountered by the system. |
| 1.3.6.1.4.1.36.2.18.11.2.6.2.1 | RowpcomErrLogEntry | not-accessible | mandatory | A list of errors logged by the system. |
| 1.3.6.1.4.1.36.2.18.11.2.6.2.1.1 | ColumnpcomErrLogIndex | read-only | mandatory | The value of this object uniquely identifies an entry in the pcomErrLogTable. |
| 1.3.6.1.4.1.36.2.18.11.2.6.2.1.2 | ColumnpcomErrLogTimeStamp | read-only | mandatory | The value of sysUpTime at the time in which the error is logged. |
| 1.3.6.1.4.1.36.2.18.11.2.6.2.1.3 | ColumnpcomErrLogResetNumber | read-only | mandatory | The number of resets which have occurred at the time in which the error is logged. (This is the sum of pcomEsysPowerups, pcomEsysMgmtResets, and pcomEsysUnsoli… |
| 1.3.6.1.4.1.36.2.18.11.2.6.2.1.4 | ColumnpcomErrLogInfo | read-only | mandatory | A textual description of the error being logged. |
| 1.3.6.1.4.1.36.2.18.11.2.6.2.1.5 | ColumnpcomErrLogFwVersion | read-only | mandatory | The firmware version at the time in which the error is logged. |
| 1.3.6.1.4.1.36.2.18.11.2.7 | NodepcomEsys | |||
| 1.3.6.1.4.1.36.2.18.11.2.7.1 | ScalarpcomEsysPowerups | read-only | mandatory | The number of times this device was powered on. Power Ups, Management Resets and Unsolicited Resets are all mutually exclusive. |
| 1.3.6.1.4.1.36.2.18.11.2.7.2 | ScalarpcomEsysMgmtResets | read-only | mandatory | The number of times the device was initialized with a management command. Power Ups, Management Resets and Unsolicited Resets are all mutually exclusive. |
| 1.3.6.1.4.1.36.2.18.11.2.7.3 | ScalarpcomEsysUnsolicitedResets | read-only | mandatory | Number of times the device initialized itself after encountering a fatal error. Power Ups, Management Resets and Unsolicited Resets are all mutually exclusive. |
| 1.3.6.1.4.1.36.2.18.11.2.7.4 | ScalarpcomEsysNVRAMfailedFlag | read-only | mandatory | When true(1), this flag indicates that the device's non-volatile memory store has failed. Devices whose non-volatile memory store have failed still accept SNMP… |
| 1.3.6.1.4.1.36.2.18.11.2.7.5 | ScalarpcomEsysNVRAMsize | read-only | mandatory | The size of the non-volatile store. Note that this is the unformated size, and as such may not reflects the number usable octets provided by the store. |
| 1.3.6.1.4.1.36.2.18.11.2.7.6 | ScalarpcomEsysNVRAMavailableOctets | read-only | mandatory | The number of octets currently available in the non-volatile store. Note that this may not provide a one-to-one mapping of user data to availableOctets. For ex… |
| 1.3.6.1.4.1.36.2.18.11.2.7.7 | ScalarpcomEsysHubVersion | read-only | mandatory | The version number of the hub citizenship code that is being used in this device. |
| 1.3.6.1.4.1.36.2.18.11.2.8 | NodepcomEif | |||
| 1.3.6.1.4.1.36.2.18.11.2.8.1 | TablepcomEifTable | not-accessible | mandatory | A table which describes extensions for the mib-2 interface group. |
| 1.3.6.1.4.1.36.2.18.11.2.8.1.1 | RowpcomEifEntry | not-accessible | mandatory | A list of interface information. For each instance of MIB-2 interface group ifIndex there exists a corresponding instance of pcomEifIndex. |
| 1.3.6.1.4.1.36.2.18.11.2.8.1.1.1 | ColumnpcomEifIndex | read-only | mandatory | The value of this object uniquely identifies an entry in the pcomEifTable. Each pcomEifTable corresponds to an instance of ifIndex in the MIB-2 interface group. |
| 1.3.6.1.4.1.36.2.18.11.2.8.1.1.2 | ColumnpcomEifInBroadcastPkts | read-only | mandatory | Interfaces which support broadcasting (e.g. ethernet-csmacd ports - ifType 6) return the number of broadcast packets delivered to a higher-layer protocol. Inte… |
| 1.3.6.1.4.1.36.2.18.11.2.9 | NodepcomLigo | |||
| 1.3.6.1.4.1.36.2.18.11.2.9.1 | ScalarpcomLigoNumEntries | read-only | mandatory | The number of entries in the LIGO table. |
| 1.3.6.1.4.1.36.2.18.11.2.9.2 | TablepcomLigoTable | not-accessible | mandatory | A list of LIGOs (building blocks). |
| 1.3.6.1.4.1.36.2.18.11.2.9.2.1 | RowpcomLigoEntry | not-accessible | mandatory | A LIGO entry containing objects which describe the building block. |
| 1.3.6.1.4.1.36.2.18.11.2.9.2.1.1 | ColumnpcomLigoIndex | read-only | mandatory | A unique value for each LIGO. The value of this object ranges between 1 and n where n is the total number of building blocks supported by the device. |
| 1.3.6.1.4.1.36.2.18.11.2.9.2.1.2 | ColumnpcomLigoType | read-only | mandatory | A building block's type. |
| 1.3.6.1.4.1.36.2.18.11.2.9.2.1.3 | ColumnpcomLigoSubtypeSelect | read-write | mandatory | The pcomLigoSubtypeIndex into the pcomLigoSubtypeTable describes the specific LIGO type is supported. The value of this object must be a valid index in the pco… |
| 1.3.6.1.4.1.36.2.18.11.2.9.3 | ScalarpcomLigoSubtypeNumEntries | read-only | mandatory | The number of entries in the pcomLigoSubtypeTable. |
| 1.3.6.1.4.1.36.2.18.11.2.9.4 | TablepcomLigoSubtypeTable | not-accessible | mandatory | A list of LIGO (building blocks) subtypes. |
| 1.3.6.1.4.1.36.2.18.11.2.9.4.1 | RowpcomLigoSubtypeEntry | not-accessible | mandatory | An entry containing objects which describe the building block's specific type. |
| 1.3.6.1.4.1.36.2.18.11.2.9.4.1.1 | ColumnpcomLigoSubtypeIndex | read-only | mandatory | A unique value for each LIGO subtype. |
| 1.3.6.1.4.1.36.2.18.11.2.9.4.1.2 | ColumnpcomLigoSubtypeLigoIndex | read-only | mandatory | The value of the LigoIndex in the pcomLigoTable that can use this subtype. |
| 1.3.6.1.4.1.36.2.18.11.2.9.4.1.3 | ColumnpcomLigoSubtypeLabelIndexMask | read-only | mandatory | This object specifies the labels that are used by this LigoSubtype. It is a bit map of if indexes from the pcomLigoLabelTable with bit 0 corresponding to if in… |
| 1.3.6.1.4.1.36.2.18.11.2.9.4.1.4 | ColumnpcomLigoSubtypeFlavor | read-only | mandatory | A building block's type. |
| 1.3.6.1.4.1.36.2.18.11.2.9.5 | ScalarpcomLigoLabelNumEntries | read-only | mandatory | The number of entries in the pcomLigo label table. |
| 1.3.6.1.4.1.36.2.18.11.2.9.6 | TablepcomLigoLabelTable | not-accessible | mandatory | A list of Labels (for ports). |
| 1.3.6.1.4.1.36.2.18.11.2.9.6.1 | RowpcomLigoLabelEntry | not-accessible | mandatory | An entry containing objects which describe the label of the port affected by the LIGO this module supports. |
| 1.3.6.1.4.1.36.2.18.11.2.9.6.1.1 | ColumnpcomLigoLabelIndex | read-only | mandatory | A unique value for each Label. The value of this object ranges between 1 and n where n is the total number of Labels supported by the device. |
| 1.3.6.1.4.1.36.2.18.11.2.9.6.1.2 | ColumnpcomLigoLabelString | read-only | mandatory | A textual description of the port number associated with a LIGO. If the device is bridge then bridge port numbers are used. If the device is a wiring concentra… |
| 1.3.6.1.4.1.36.2.18.11.2.10 | NodepcomCon | |||
| 1.3.6.1.4.1.36.2.18.11.2.10.1 | ScalarpcomConTotalConfigChanges | read-only | mandatory | The total number of configuration changes since power up. |
| 1.3.6.1.4.1.36.2.18.11.2.10.2 | ScalarpcomConNumEntries | read-only | mandatory | The number of entries in the Connector table. |
| 1.3.6.1.4.1.36.2.18.11.2.10.3 | TablepcomConTable | not-accessible | mandatory | A list of front bezel and docking station connectors, internal thinwires, and MACs on a line card. |
| 1.3.6.1.4.1.36.2.18.11.2.10.3.1 | RowpcomConEntry | not-accessible | mandatory | A connector entry contains objects which describe a front bezel connector, docking station connector, internal thinwire, or MAC. |
| 1.3.6.1.4.1.36.2.18.11.2.10.3.1.1 | ColumnpcomConIndex | read-only | mandatory | A unique value for each front bezel connector, docking station connector, internal thinwire, or MAC. The value of this object ranges between 1 and n where n is… |
| 1.3.6.1.4.1.36.2.18.11.2.10.3.1.2 | ColumnpcomConTech | read-only | mandatory | A front bezel connector, docking station connector, internal thinwire, or MAC technology type. |
| 1.3.6.1.4.1.36.2.18.11.2.10.3.1.3 | ColumnpcomConClass | read-only | mandatory | An entry's class. This indicates whether a entry is a front bezel connector, docking station connector, internal thinwire, or MAC. |
| 1.3.6.1.4.1.36.2.18.11.2.10.3.1.4 | ColumnpcomConGroupId | read-write | mandatory | The identifier of a connector, internal thinwire, and/or MAC group that are only assignable together to an internal LAN. In other words if you assign one of th… |
| 1.3.6.1.4.1.36.2.18.11.2.10.3.1.5 | ColumnpcomConGroupSet | read-only | mandatory | This object specifies the group Ids that a connector, internal thinwire, or MAC can join. It is a bit map of pcomConTable Group Ids with bit 1 corresponding to… |
| 1.3.6.1.4.1.36.2.18.11.2.10.3.1.6 | ColumnpcomConLabel | read-only | mandatory | Text that contains the connector label on either the front bezel or docking station. If it is an internal thinwire or MAC this text describes the function. Thi… |
| 1.3.6.1.4.1.36.2.18.11.2.10.3.1.7 | ColumnpcomConSubtypeSelect | read-write | mandatory | The pcomConSubtypeIndex points into the pcomConSubtypeTable which describes the specific media type a connector, internal thinwire, or MAC that is selected to … |
| 1.3.6.1.4.1.36.2.18.11.2.10.4 | ScalarpcomConSubtypeNumEntries | read-only | mandatory | The number of entries in the connector subtype table. |
| 1.3.6.1.4.1.36.2.18.11.2.10.5 | TablepcomConSubtypeTable | not-accessible | mandatory | A list of connector, internal thinwire, and MAC subtypes supported by a line card. |
| 1.3.6.1.4.1.36.2.18.11.2.10.5.1 | RowpcomConSubtypeEntry | not-accessible | mandatory | A backplane subtype entry containing objects which describe the subtypes supported by connectors. |
| 1.3.6.1.4.1.36.2.18.11.2.10.5.1.1 | ColumnpcomConSubtypeIndex | read-only | mandatory | A unique value for each Flavor supported by a the set of connectors indicated in pcomConSubtypeConSet. The value of this object ranges between 1 and n, where n… |
| 1.3.6.1.4.1.36.2.18.11.2.10.5.1.2 | ColumnpcomConSubtypeConSet | read-only | mandatory | This object specifies the connect indices, in the pcomConTable, which can support the specified pcomConSubtypeFlavor. |
| 1.3.6.1.4.1.36.2.18.11.2.10.5.1.3 | ColumnpcomConSubtypeFlavor | read-only | mandatory | The specific media type a connector supports. |
| 1.3.6.1.4.1.36.2.18.11.2.10.6 | ScalarpcomConIntLanNumEntries | read-only | mandatory | The number of entries in the internal LAN table. |
| 1.3.6.1.4.1.36.2.18.11.2.10.7 | TablepcomConIntLanTable | not-accessible | mandatory | A list of internal LANs in a line card. Each line card has a pcomConIntLanTable containing one entry for each of its internal LANs. |
| 1.3.6.1.4.1.36.2.18.11.2.10.7.1 | RowpcomConIntLanEntry | not-accessible | mandatory | An internal LAN entry containing objects which describe a internal LAN. |
| 1.3.6.1.4.1.36.2.18.11.2.10.7.1.1 | ColumnpcomConIntLanIndex | read-only | mandatory | A unique value for each internal LAN. |
| 1.3.6.1.4.1.36.2.18.11.2.10.7.1.2 | ColumnpcomConIntLanGroupIdMask | read-only | mandatory | This object specifies the group Ids of connectors, internal thinwire, and MACs that can be connected to this internal LAN. It is a bit map of pcomConTable Grou… |
| 1.3.6.1.4.1.36.2.18.11.2.10.7.1.3 | ColumnpcomConIntLanName | read-write | mandatory | Text that contains a name given to an internal LAN. The default value is a zero length string. |
| 1.3.6.1.4.1.36.2.18.11.2.10.8 | ScalarpcomConAssignNumEntries | read-only | mandatory | The number of entries in the connector assignment table. |
| 1.3.6.1.4.1.36.2.18.11.2.10.9 | TablepcomConAssignTable | not-accessible | mandatory | A list of connector, internal tw, and MAC groups to internal LAN assignments of a line card. The creation of a table entry, creates a connection of a front con… |
| 1.3.6.1.4.1.36.2.18.11.2.10.9.1 | RowpcomConAssignEntry | not-accessible | mandatory | A connector group assignment entry contains objects which describe a line card's connections of connectors, internal thinwires, and MACs to internal LANs. |
| 1.3.6.1.4.1.36.2.18.11.2.10.9.1.1 | ColumnpcomConAssignIndex | read-write | mandatory | A unique value for each connector group assignment. This object in non-volatile. |
| 1.3.6.1.4.1.36.2.18.11.2.10.9.1.2 | ColumnpcomConAssignConGroup | read-write | mandatory | Specifies the id of the connector group in the pcomConTable for which the assignment applies. Together with pcomConAssignIntLan, this defines a group of connec… |
| 1.3.6.1.4.1.36.2.18.11.2.10.9.1.3 | ColumnpcomConAssignIntLan | read-write | mandatory | Specifies the index of the internal LAN described in the pcomConIntLanTable for which the assignment applies. Together with pcomConAssignConGroup, this defines… |
| 1.3.6.1.4.1.36.2.18.11.2.10.9.1.4 | ColumnpcomConAssignEntryStatus | read-write | mandatory | The status of a table entry. This object in non-volatile. |
| 1.3.6.1.4.1.36.2.18.11.2.11 | Nodepcom90mgt | |||
| 1.3.6.1.4.1.36.2.18.11.2.11.1 | Scalarpcom90mgtBackplaneHubMaster | read-write | mandatory | The desired state of the DEChub 90 manager's hub mastership (i.e. it's ability to directly manage repeaters, terminal servers and bridges and discover other mo… |
| 1.3.6.1.4.1.36.2.18.11.2.11.2 | Scalarpcom90mgtBackplaneHubMasterState | read-only | mandatory | Indicates whether the DEChub 90 manager is managing the hub (i.e. capable of directly managing repeaters, terminal servers and bridges and discovering other mo… |
| 1.3.6.1.4.1.36.2.18.11.2.11.3 | Scalarpcom90mgtBackplaneConfig | read-write | mandatory | Indicates whether the DEChub 90 manager is managing the a single DEChub 90, a pair of DEChub 90's, a DECstack 90 or is just stand alone. If this is notConfigur… |