DECHUB900-ERPTR-MIB-V3-0
132 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.36 | Nodedec | |||
| 1.3.6.1.4.1.36.2 | Nodeema | |||
| 1.3.6.1.4.1.36.2.18 | NodedecMIBextension | |||
| 1.3.6.1.4.1.36.2.18.11 | NodedecHub900 | |||
| 1.3.6.1.4.1.36.2.18.11.5 | Noderepeater | |||
| 1.3.6.1.4.1.36.2.18.11.5.1 | NoderptrVersion1 | |||
| 1.3.6.1.4.1.36.2.18.11.5.1.1 | NoderptrExtensions | |||
| 1.3.6.1.4.1.36.2.18.11.5.1.1.1 | NodeerptrBasicPackage | |||
| 1.3.6.1.4.1.36.2.18.11.5.1.1.1.1 | NodeerptrRptrInfo | |||
| 1.3.6.1.4.1.36.2.18.11.5.1.1.1.1.1 | ScalarerptrAutoPartitionAlg | read-write | mandatory | The auto-partition algorithm protects the network from certain fault conditions which can halt all LAN communications. A media short or break, a faulty connect… |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.1.1.2 | ScalarerptrAutoPartitionReconnectAlg | read-write | mandatory | The auto-partition reconnection algorithm defines the criteria for determining that a malfunction on an auto-partitioned port has been cleared. The auto-partit… |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.1.1.3 | ScalarerptrJamBits | read-write | mandatory | When a repeater detects a collision on any of the ports to which it is transmitting, it transmits a jam signal to all of the ports to which it is connected. Th… |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.1.1.4 | ScalarerptrHealthTextChanges | read-only | mandatory | This counter increments each time the rptrHealthText object defined in RFC 1516 is modified. |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.1.1.5 | ScalarerptrTotalPortEvents | read-only | mandatory | The total number of times any port in the repeater became not operational or auto-partitioned, or the media for any ports' MAUs became unavailable. This object… |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.1.1.6 | ScalarerptrTotalRptrErrors | read-only | mandatory | The total number of errors which have occured on all the groups in a repeater. This object is a summation of the values of the rptMonitorGroupTotalErrors as de… |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.1.1.7 | ScalarerptrJabberProtectionAdminStatus | read-write | mandatory | The jabber protection function automatically disables a port whenever it detects a very long input event (or jabber) on that port. Once disabled, the port will… |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.1.1.8 | ScalarerptrTotalPorts | read-only | mandatory | The total number of front panel ports in the repeater. This object is summation of rptrPortCapacity as defined in RFC1516 for each group. This does not include… |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.1.1.9 | ScalarerptrPMDCarrierCardType | read-only | mandatory | The value unknown(1) indicates card that connects to MOD-PMDs are not present. The value type10Base (2) indicates card that connects to MOD-PMDs are present an… |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.1.2 | NodeerptrGroupInfo | |||
| 1.3.6.1.4.1.36.2.18.11.5.1.1.1.2.1 | TableerptrGroupTable | not-accessible | mandatory | Table of descriptive and status information about the groups of ports. |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.1.2.1.1 | RowerptrGroupEntry | not-accessible | mandatory | An entry in the table containing information about a single group of ports. |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.1.2.1.1.1 | ColumnerptrGroupIndex | read-only | mandatory | This object identifies the group within the repeater for which this entry contains information. This value is never greater than the rptrGroupCapacity object d… |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.1.2.1.1.2 | ColumnerptrGroupTransmitCollisions | read-only | mandatory | This counter increments every time the port-group's repeater state machine enters the TRANSMIT COLLISION state from any state other than ONE PORT LEFT. See Fig… |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.1.2.1.1.3 | ColumnerptrGroupReset | read-write | mandatory | Setting this object to reset(2) causes the port-group's repeater unit state machine to transition to the START state of Fig 9-2 in section 9 [3]. Setting this … |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.1.2.1.1.4 | ColumnerptrGroupLanTotalOctets | read-only | mandatory | This object counts the total number of octets contained in non-collision packets transmitted by all the ports in this group. This counter increments by the sam… |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.1.3 | NodeerptrPortInfo | |||
| 1.3.6.1.4.1.36.2.18.11.5.1.1.1.3.1 | TableerptrPortTable | not-accessible | mandatory | Table of descriptive and status information about the ports. |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.1.3.1.1 | RowerptrPortEntry | not-accessible | mandatory | An entry in the table, containing information about a single port. |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.1.3.1.1.1 | ColumnerptrPortGroupIndex | read-only | mandatory | This object identifies the group containing the port for which this entry contains information. This value is never greater than the rptrGroupCapacity object d… |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.1.3.1.1.2 | ColumnerptrPortIndex | read-only | mandatory | This object identifies the port within the group for which this entry contains information. This value is never greater than the rptrGroupPortCapacity object d… |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.1.3.1.1.3 | ColumnerptrPortName | read-write | mandatory | An administratively-assigned name for this repeater port. Note: The state of this object is preserved when the repeater undergoes a power-up reset. |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.1.3.1.1.4 | ColumnerptrPortPartitions | read-only | mandatory | This counter increments by one each time the repeater auto-partitions this port or the port becomes disabled or otherwise not operational. |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.1.3.1.1.5 | ColumnerptrPortPartitionReason | read-only | mandatory | This object describes the reason why a port is currently auto-partitioned or otherwise disabled. A value of unknown(1) indicates that the port currently has a … |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.1.3.1.1.6 | ColumnerptrPortMAUType | read-only | mandatory | This object indicates the type of Medium Attachment Unit (MAU) associated with this port. unknown(1) - cannot determine MAU type. typeAUI(2) - no internal MAU,… |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.1.3.1.1.7 | ColumnerptrPortSQETestError | read-only | mandatory | This object indicates whether or not a port has detected SQE Test messages from its attached MAU. The value of this object persists between packets. This objec… |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.2 | NodeerptrAddrDBPackage | |||
| 1.3.6.1.4.1.36.2.18.11.5.1.1.2.1 | NodeerptrAddrDBRptrInfo | |||
| 1.3.6.1.4.1.36.2.18.11.5.1.1.2.1.1 | ScalarerptrAddrDBTableCapacity | read-only | mandatory | This object specifies the maximum number of MAC addresses which can be stored in erptrAddrDBPortAddrTable. |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.2.2 | NodeerptrAddrDBGroupInfo | |||
| 1.3.6.1.4.1.36.2.18.11.5.1.1.2.3 | NodeerptrAddrDBPortInfo | |||
| 1.3.6.1.4.1.36.2.18.11.5.1.1.2.3.1 | TableerptrAddrDBPortAddrTable | not-accessible | mandatory | A table of port-mapping information about MAC addresses detected by the repeater. |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.2.3.1.1 | RowerptrAddrDBPortAddrEntry | not-accessible | mandatory | An entry in the table containing port-mapping information about a single MAC address. |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.2.3.1.1.1 | ColumnerptrAddrDBPortPhyAddr | read-only | mandatory | This object identifies the source address of a readable frame received from a port in the agents port table. |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.2.3.1.1.2 | ColumnerptrAddrDBPortGroupIndex | read-only | mandatory | This object identifies the group containing the port on which this entry's MAC address was seen. |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.2.3.1.1.3 | ColumnerptrAddrDBPortIndex | read-only | mandatory | This object identifies the port within the group on which this entry's MAC address was seen. |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.3 | NodeerptrDprPackage | |||
| 1.3.6.1.4.1.36.2.18.11.5.1.1.3.1 | NodeerptrDprRptrInfo | |||
| 1.3.6.1.4.1.36.2.18.11.5.1.1.3.1.1 | ScalarerptrDprTotalStateChanges | read-only | mandatory | This counter increments whenever the erptrDprLinkStateChanges counter for any entry in erptrDprLinkTable increments. This object is not necessarily the sum of … |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.3.2 | NodeerptrDprGroupInfo | |||
| 1.3.6.1.4.1.36.2.18.11.5.1.1.3.3 | NodeerptrDprPortInfo | |||
| 1.3.6.1.4.1.36.2.18.11.5.1.1.3.3.1 | TableerptrDprLinkTable | not-accessible | mandatory | Table of redundant link configuration and status information. |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.3.3.1.1 | RowerptrDprLinkEntry | not-accessible | mandatory | An entry in the table containing information describing a single redundant link's configuration and status. |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.3.3.1.1.1 | ColumnerptrDprLinkGroupIndex | read-only | mandatory | This object identifies the group containing the port which is a member of the dual-redundant link for which this entry contains information. This value is neve… |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.3.3.1.1.2 | ColumnerptrDprLinkPortIndex | read-only | mandatory | This object identifies the port within the group which is a member of the dual-redundant link for which this entry contains information. If erptrDprLinkType is… |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.3.3.1.1.3 | ColumnerptrDprLinkType | read-write | mandatory | Setting this object to redundantMaster(1) causes the repeater to configure the port specified by erptrDprLinkGroupIndex and erptrDprLinkPortIndex as a Master p… |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.3.3.1.1.4 | ColumnerptrDprLinkToggle | read-write | mandatory | If erptrDprLinkType equals redundantMaster, setting this object to toggle(2) causes a redundant link specified by this table entry to undergo a state change. T… |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.3.3.1.1.5 | ColumnerptrDprLinkOperStatus | read-only | mandatory | This object reports the operational status of either the redundant master primary port or the redundant responder port associated with this entry (as specified… |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.3.3.1.1.6 | ColumnerptrDprSecondaryGroupIndex | read-write | mandatory | This object identifies the group containing the master redundant port on the secondary segment of the redundant link associated with this entry. This secondary… |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.3.3.1.1.7 | ColumnerptrDprSecondaryPortIndex | read-write | mandatory | This object identifies the master redundant port (within the group) on the secondary segment of the redundant link associated with this entry. This secondary r… |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.3.3.1.1.8 | ColumnerptrDprSecondaryOperStatus | read-only | mandatory | This object reports the operational status of the master redundant secondary port associated with this entry (as specified by erptrDprSecondaryGroupIndex and e… |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.3.3.1.1.9 | ColumnerptrDprLinkName | read-write | mandatory | An administratively-assigned name for this dual-redundant link. The default value for this object is a zero-length string. Note: The state of this object is pr… |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.3.3.1.1.10 | ColumnerptrDprLinkStateChanges | read-only | mandatory | This counter increments by one whenever the value of erptrDprLinkOperStatus or erptrDprSecondaryOperStatus changes. |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.3.3.1.1.11 | ColumnerptrDprLinkEntryStatus | read-write | mandatory | The status of this table entry. Setting this object to createRequest(2) adds a new entry in this table. Immediately after completing the create operation, the … |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.4 | NodeerptrSecurityPackage | |||
| 1.3.6.1.4.1.36.2.18.11.5.1.1.4.1 | NodeerptrSecurityRptrInfo | |||
| 1.3.6.1.4.1.36.2.18.11.5.1.1.4.1.1 | ScalarerptrSecurityRptrSecurityViolations | read-only | mandatory | This counter increments by one each time the repeater detects an intrusion security violation on any repeater port. This counter is the summation of the erptrS… |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.4.1.2 | TableerptrSecurityRptrLogTable | not-accessible | mandatory | A table of intrusion security violations. The maximum number of entries saved in the log table is implementation-specific. |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.4.1.2.1 | RowerptrSecurityRptrLogEntry | not-accessible | mandatory | An entry in the table containing information describing a single intrusion security violation. |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.4.1.2.1.1 | ColumnerptrSecurityRptrLogIndex | read-only | mandatory | An index that uniquely identifies an entry in the log table. |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.4.1.2.1.2 | ColumnerptrSecurityRptrLogGroupIndex | read-only | mandatory | This object identifies the group containing the port on which the intrusion security violation occurred. |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.4.1.2.1.3 | ColumnerptrSecurityRptrLogPortIndex | read-only | mandatory | This object identifies the port within the group on which this intrusion security violation occurred. |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.4.1.2.1.4 | ColumnerptrSecurityRptrLogTime | read-only | mandatory | This object identifies the value of sysUpTime at the time the repeater detected the intrusion security violation. |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.4.1.2.1.5 | ColumnerptrSecurityRptrLogPhysAddress | read-only | mandatory | An intrusion security violation occurs when a repeater port receives a data packet with a source address not found in that port's authorized address list. This… |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.4.1.3 | ScalarerptrSecurityRptrLogCapacity | read-only | mandatory | This object specifies the maximum number of intrusion security violation log entries which can appear in erptrSecurityRptrLogTable at any one time. |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.4.2 | NodeerptrSecurityGroupInfo | |||
| 1.3.6.1.4.1.36.2.18.11.5.1.1.4.3 | NodeerptrSecurityPortInfo | |||
| 1.3.6.1.4.1.36.2.18.11.5.1.1.4.3.1 | TableerptrSecurityPortCtrlTable | not-accessible | mandatory | A table of security configuration, control and status information. |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.4.3.1.1 | RowerptrSecurityPortCtrlEntry | not-accessible | mandatory | An entry in the table containing information describing the security configuration and status of a single port. |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.4.3.1.1.1 | ColumnerptrSecurityPortCtrlGroupIndex | read-only | mandatory | This object identifies the group containing the port for which this entry contains information. This value is never greater than rptrGroupCapacity. |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.4.3.1.1.2 | ColumnerptrSecurityPortCtrlPortIndex | read-only | mandatory | This object identifies the port within the group for which this entry contains information. This value is never greater than rptrGroupPortCapacity for the asso… |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.4.3.1.1.3 | ColumnerptrSecurityPortCtrlEavesdropMode | read-write | mandatory | Setting this object to enabled (1) enables eavesdrop prevention on this port. When eavesdrop prevention is active, the repeater compares unicast destination ad… |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.4.3.1.1.4 | ColumnerptrSecurityPortCtrlIntrusionMode | read-write | mandatory | To detect intrusion security violations, the repeater compares source addresses of packets received from this port with the addresses in the port's authorized … |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.4.3.1.1.5 | ColumnerptrSecurityPortCtrlOperStatus | read-only | mandatory | The value securityOperational(1) indicates that eavesdrop prevention and/or intrusion detection/protection are enabled and actively functioning on this port. T… |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.4.3.1.1.6 | ColumnerptrSecurityPortCtrlViolations | read-only | mandatory | A count of the number intrusion security violations detected on this port. |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.4.3.2 | TableerptrSecurityPortAddrTable | not-accessible | mandatory | A table of authorized MAC addresses mapped to repeater ports. The repeater uses these addresses to enforce security. |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.4.3.2.1 | RowerptrSecurityPortAddrEntry | not-accessible | mandatory | An entry in the table containing information to assign a single authorized MAC address to a single repeater port. |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.4.3.2.1.1 | ColumnerptrSecurityPortAddrGroupIndex | read-write | mandatory | This object identifies the group containing the port for which this entry contains information. This value is never greater than rptrGroupCapacity. Note: The s… |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.4.3.2.1.2 | ColumnerptrSecurityPortAddrPortIndex | read-write | mandatory | This object identifies the port within the group for which this entry contains information. This value can never be greater than rptrGroupPortCapacity for the … |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.4.3.2.1.3 | ColumnerptrSecurityPortAddrPhysAddress | read-write | mandatory | This object identifies an authorized MAC address assigned to this repeater port for use in enforcing eavesdrop prevention and intrusion detection/protection. N… |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.4.3.2.1.4 | ColumnerptrSecurityPortAddrStatus | read-write | mandatory | The status of this table entry. Setting this object to createRequest(2) adds a new entry in this table mapping the authorized MAC address specified by this ent… |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.5 | NodeerptrMauPackage | |||
| 1.3.6.1.4.1.36.2.18.11.5.1.1.5.1 | NodeerptrMauRptrInfo | |||
| 1.3.6.1.4.1.36.2.18.11.5.1.1.5.1.1 | ScalarerptrMauTotalMediaUnavailable | read-only | mandatory | This object returns the total number of MAUs in the repeater whose erptrMauMediaAvailable objects are equal to notAvailable(4), remoteFault(5), or invalidSigna… |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.5.2 | NodeerptrMauGroupInfo | |||
| 1.3.6.1.4.1.36.2.18.11.5.1.1.5.3 | NodeerptrMauPortInfo | |||
| 1.3.6.1.4.1.36.2.18.11.5.1.1.5.3.1 | TableerptrMauTable | not-accessible | mandatory | Table of descriptive and status information about MAU(s) attached to the ports of a repeater. |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.5.3.1.1 | RowerptrMauEntry | not-accessible | mandatory | An entry in the table containing information about a single MAU. |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.5.3.1.1.1 | ColumnerptrMauGroupIndex | read-only | mandatory | This object identifies the group containing the port to which the MAU described by this entry is connected. |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.5.3.1.1.2 | ColumnerptrMauPortIndex | read-only | mandatory | This object identifies the port within group to which the MAU described by this entry is connected. |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.5.3.1.1.3 | ColumnerptrMauIndex | read-only | mandatory | The object uniquely identifies a MAU connected to a port within the group that is described by this entry. |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.5.3.1.1.4 | ColumnerptrMauLinkTestAdminStatus | read-write | mandatory | Link test functions detect certain types of media faults on point-to-point link segments connecting pairs of link-type MAUs (e.g. 10BASE-T, 10BASE-F, FOIRL). T… |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.5.3.1.1.5 | ColumnerptrMauMediaPolarityStatus | read-only | mandatory | A value of polarityNotReversed(1) indicates that the MAU senses that received data packet waveform polarity is correct. A value of polarityReversed(2) indicate… |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.5.3.1.1.6 | ColumnerptrMauMediaAvailable | read-only | mandatory | If the MAU is link-type (FOIRL, 10BASE-T, 10BASE-F) then this object is equivalent to the link test fail state/low light function. For an AUI or a coax MAU thi… |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.5.3.1.1.7 | ColumnerptrMauMediaAvailableChanges | read-only | mandatory | A count of the number of times that erptrMauMediaAvailable for this MAU instance leaves the state available(3). |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.5.3.1.1.8 | ColumnerptrMauMaxLinkLength | read-write | mandatory | Link-type MAU (e.g. 10BASE-T, 10BASE-FL, FOIRL) standards define the maximum length of any one point-to-point link segment. Some MAUs may support a mode of ope… |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.6 | NodeerptrAddrLearnPackage | |||
| 1.3.6.1.4.1.36.2.18.11.5.1.1.6.1 | NodeerptrAddrLearnRptrInfo | |||
| 1.3.6.1.4.1.36.2.18.11.5.1.1.6.2 | NodeerptrAddrLearnGroupInfo | |||
| 1.3.6.1.4.1.36.2.18.11.5.1.1.6.3 | NodeerptrAddrLearnPortInfo | |||
| 1.3.6.1.4.1.36.2.18.11.5.1.1.6.3.1 | TableerptrAddrLearnPortCtrlTable | not-accessible | mandatory | A table of configuration, control and status information to manage the learning of the first N distinct MAC source addresses seen per port. |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.6.3.1.1 | RowerptrAddrLearnPortCtrlEntry | not-accessible | mandatory | An entry in the table containing information describing the control and status first N distinct MAC source address learning of a single port. |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.6.3.1.1.1 | ColumnerptrAddrLearnPortCtrlGroupIndex | read-only | mandatory | This object identifies the group containing the port for which this entry contains information. This value is never greater than rptrGroupCapacity. |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.6.3.1.1.2 | ColumnerptrAddrLearnPortCtrlPortIndex | read-only | mandatory | This object identifies the port within the group for which this entry contains information. This value is never greater than rptrGroupPortCapacity for the asso… |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.6.3.1.1.3 | ColumnerptrAddrLearnPortCtrlCapacity | read-only | mandatory | This object specifies the maximum number of distinct MAC source addresses the repeater can learn and save on this port. |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.6.3.1.1.4 | ColumnerptrAddrLearnPortCtrlAdminStatus | read-write | mandatory | Setting this object to enableLearning(2) causes the agent to learn MAC source addresses from readable frames received on this port. The agent records distinct … |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.6.3.1.1.5 | ColumnerptrAddrLearnPortCtrlOperStatus | read-only | mandatory | A value of learningEnabledAndActive(1) indicates that the agent is actively learning MAC source addresses from readable frames received on this port and record… |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.6.3.2 | TableerptrAddrLearnPortAddressTable | not-accessible | mandatory | This table records the first N distinct MAC source addresses detected on readable frames received on each of the repeater's ports since address learning was la… |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.6.3.2.1 | RowerptrAddrLearnPortAddressEntry | not-accessible | mandatory | An entry in the table containing information regarding a single MAC address learned on one repeater port. |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.6.3.2.1.1 | ColumnerptrAddrLearnPortAddressGroupIndex | read-only | mandatory | This object identifies the group containing the port for which this entry contains information. This value is never greater than rptrGroupCapacity. |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.6.3.2.1.2 | ColumnerptrAddrLearnPortAddressPortIndex | read-only | mandatory | This object identifies the port within the group for which this entry contains information. This value can never be greater than rptrGroupPortCapacity for the … |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.6.3.2.1.3 | ColumnerptrAddrLearnPortAddressIndex | read-only | mandatory | This object identifies an index corresponding to a distinct MAC source address for which this entry contains information. This value can never be greater than … |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.6.3.2.1.4 | ColumnerptrAddrLearnPortAddress | read-only | mandatory | This object identifies a distinct MAC source address of a readable frame received on the port associated with this entry. |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.7 | NodeerptrMonitorPackage | |||
| 1.3.6.1.4.1.36.2.18.11.5.1.1.7.1 | NodeerptrMonitorRptrInfo | |||
| 1.3.6.1.4.1.36.2.18.11.5.1.1.7.2 | NodeerptrMonitorGroupInfo | |||
| 1.3.6.1.4.1.36.2.18.11.5.1.1.7.3 | NodeerptrMonitorPortInfo | |||
| 1.3.6.1.4.1.36.2.18.11.5.1.1.7.3.1 | TableerptrMonitorPortTable | not-accessible | mandatory | A table of extended performance and error statistics for the ports. |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.7.3.1.1 | RowerptrMonitorPortEntry | not-accessible | mandatory | An entry in the table containing extended performance and error statistics for a single port. |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.7.3.1.1.1 | ColumnerptrMonitorPortGroupIndex | read-only | mandatory | This object identifies the group containing the port for which this entry contains information. This value is never greater than rptrGroupCapacity. |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.7.3.1.1.2 | ColumnerptrMonitorPortIndex | read-only | mandatory | This object identifies the port within the group for which this entry contains information. This value is never greater than rptrGroupPortCapacity for the asso… |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.7.3.1.1.3 | ColumnerptrMonitorPortMulticastFrames | read-only | mandatory | This object is the number of valid multicast frames that have been received on this port. This counter is incremented by one for each frame received on this po… |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.7.3.1.1.4 | ColumnerptrMonitorPortBroadcastFrames | read-only | mandatory | This object is the number of valid broadcast frames that have been received on this port. This counter is incremented by one for each frame received on this po… |