DECHUB900-HRIP-MIB-V3-0
27 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | enterprises Gauge |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.36 | Nodedec | |||
| 1.3.6.1.4.1.36.2 | Nodeema | |||
| 1.3.6.1.4.1.36.2.18 | NodedecMIBextension | |||
| 1.3.6.1.4.1.36.2.18.11 | NodedecHub900 | |||
| 1.3.6.1.4.1.36.2.18.11.1 | NodemgmtAgent | |||
| 1.3.6.1.4.1.36.2.18.11.1.1 | NodemgmtAgentVersion1 | |||
| 1.3.6.1.4.1.36.2.18.11.1.1.2 | Nodehrip | |||
| 1.3.6.1.4.1.36.2.18.11.1.1.2.1 | TablehripPubRingCfgTable | not-accessible | mandatory | Defines a table for ring speeds. The table has 2 rows. Row 1 defines ring speed for ring A and row 2 defines the ring speed for ring B. |
| 1.3.6.1.4.1.36.2.18.11.1.1.2.1.1 | RowhripPubRingCfgEntry | not-accessible | mandatory | An entry in the hripPubRingCfgTable. |
| 1.3.6.1.4.1.36.2.18.11.1.1.2.1.1.1 | ColumnhripRingCfgIndex | read-only | mandatory | Identifies the ring being accessed ie the row of the table being referred to. |
| 1.3.6.1.4.1.36.2.18.11.1.1.2.1.1.2 | ColumnhripRingCfgSpeed | read-write | mandatory | The speed of each of the token rings on the backplane. speed4(1) indicates a speed of 4 Mbits per second while speed16(2) indicates 16 Mbits per second. The va… |
| 1.3.6.1.4.1.36.2.18.11.1.1.2.2 | TablehripPubSlotCfgTable | not-accessible | mandatory | Defines a table for Slot Configurations. Each row in the table corresponds to a backplane slot (hripSlotIndex). |
| 1.3.6.1.4.1.36.2.18.11.1.1.2.2.1 | RowhripPubSlotCfgEntry | not-accessible | mandatory | An entry in the hripPubSlotCfgTable. |
| 1.3.6.1.4.1.36.2.18.11.1.1.2.2.1.1 | ColumnhripSlotCfgIndex | read-only | mandatory | Index into the table of slot configurations. |
| 1.3.6.1.4.1.36.2.18.11.1.1.2.2.1.2 | ColumnhripSlotCfgDisable | read-write | mandatory | Locks out the corresponding backplane port in that slot. -2 is used for linecards like the MIPPY that have multiple physical token ring backplane ports. The de… |
| 1.3.6.1.4.1.36.2.18.11.1.1.2.2.1.3 | ColumnhripSlotCfgForce | read-write | mandatory | Describes a slot/ring pairing. -2 is used for linecards like the MIPPY that have multiple physical token ring backplane ports. The value of this object is main… |
| 1.3.6.1.4.1.36.2.18.11.1.1.2.3 | TablehripPubRingStatTable | not-accessible | mandatory | A table describing the number of modules on each ring. |
| 1.3.6.1.4.1.36.2.18.11.1.1.2.3.1 | RowhripPubRingStatEntry | not-accessible | mandatory | An entry describing the number of modules on each ring. |
| 1.3.6.1.4.1.36.2.18.11.1.1.2.3.1.1 | ColumnhripRingStatIndex | read-only | mandatory | An index into the hripPubRingStatTable. |
| 1.3.6.1.4.1.36.2.18.11.1.1.2.3.1.2 | ColumnhripRingStatNumModInserted | read-only | mandatory | The number of modules inserted onto the ring. |
| 1.3.6.1.4.1.36.2.18.11.1.1.2.4 | TablehripPubSlotStatTable | not-accessible | mandatory | The status of modules inserted on each slot of backplane. |
| 1.3.6.1.4.1.36.2.18.11.1.1.2.4.1 | RowhripPubSlotStatEntry | not-accessible | mandatory | An entry in the hripPubSlotStatTable. |
| 1.3.6.1.4.1.36.2.18.11.1.1.2.4.1.1 | ColumnhripSlotStatIndex | read-only | mandatory | The index into slot status table. |
| 1.3.6.1.4.1.36.2.18.11.1.1.2.4.1.2 | ColumnhripSlotStatRingAInsertCount | read-only | mandatory | The number of times that the module has transitioned between inserted/wrapped states on backplane ring A, since the module was last reset/power-cycled. |
| 1.3.6.1.4.1.36.2.18.11.1.1.2.4.1.3 | ColumnhripSlotStatRingBInsertCount | read-only | mandatory | The number of times that the module has transitioned between inserted/wrapped states on backplane ring B, since the module was last reset/power-cycled. |
| 1.3.6.1.4.1.36.2.18.11.1.1.2.4.1.4 | ColumnhripSlotStatTcuA | read-only | mandatory | Status of the TCU on ring A. If there is a non Token Ring linecard plugged into the hub, the value reported should be nonTR(3). For a Token Ring line-card the … |
| 1.3.6.1.4.1.36.2.18.11.1.1.2.4.1.5 | ColumnhripSlotStatTcuB | read-only | mandatory | Status of the TCU on ring B. If there is a non Token Ring linecard plugged into the hub, the value reported should be nonTR(3). For a Token Ring line-card the … |