DECHUB900-PTRM-MIB-V3-0
45 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | enterprises |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.36 | Nodedec | |||
| 1.3.6.1.4.1.36.2 | Nodeema | |||
| 1.3.6.1.4.1.36.2.18 | NodedecMIBextension | |||
| 1.3.6.1.4.1.36.2.18.11 | NodedecHub900 | |||
| 1.3.6.1.4.1.36.2.18.11.3 | Nodeptrm | |||
| 1.3.6.1.4.1.36.2.18.11.3.1 | NodeptrmBase | |||
| 1.3.6.1.4.1.36.2.18.11.3.1.2 | ScalarptrmBaseForceSpeed | read-write | mandatory | This object selects the speed at which to token ring linecard operates. When set to notForced(1), the linecard will not be forced. Based on the line-card its s… |
| 1.3.6.1.4.1.36.2.18.11.3.1.3 | ScalarptrmBaseSpeed | read-only | mandatory | Indicates the speed at which the linecard is operating. Devices like the DECmau 900TL autobaud when they are not forced via ptrmBaseForceSpeed and if there are… |
| 1.3.6.1.4.1.36.2.18.11.3.1.4 | ScalarptrmBaseNumLobes | read-only | mandatory | The number of end station lobes supported by this module. This is the number of rows in the ptrmLobeTable. This variable is zero for repeaters. |
| 1.3.6.1.4.1.36.2.18.11.3.2 | TableptrmTrunkTable | not-accessible | mandatory | Defines a table with rows for each token ring connection not otherwise associated with an end-user 'lobe' port. The following rows are implemented: ptrmTrunkTy… |
| 1.3.6.1.4.1.36.2.18.11.3.2.1 | RowptrmTrunkEntry | not-accessible | mandatory | A collection of trunk objects. |
| 1.3.6.1.4.1.36.2.18.11.3.2.1.1 | ColumnptrmTrunkType | read-only | mandatory | Identifies a trunk (i.e. non-lobe) port. All token ring modules implement all four rows defined by the ptrmTrunkType values. If a module's configuration does n… |
| 1.3.6.1.4.1.36.2.18.11.3.2.1.2 | ColumnptrmTrunkOperStatus | read-only | mandatory | Indicates whether the trunk port is wrapped or inserted into the linecard's internal ring. If the trunk port is not implemented in the linecard's current confi… |
| 1.3.6.1.4.1.36.2.18.11.3.2.1.3 | ColumnptrmTrunkAdminStatus | read-write | mandatory | Used to disable the trunk port of the linecard during operation. When disabled, the trunk port is forced to wrap. The value of this object is maintained across… |
| 1.3.6.1.4.1.36.2.18.11.3.2.1.4 | ColumnptrmTrunkMedia | read-only | mandatory | The media type of the trunk port. Different module types have different trunk connectors. If a module implements an STP/UTP switch, this variable indicates the… |
| 1.3.6.1.4.1.36.2.18.11.3.2.1.5 | ColumnptrmTrunkAutoWrapEnable | read-write | mandatory | The value of the physical Auto Wrap Enable (AWE) switch for the trunk port. AWE is provided only for RingIn and RingOut trunks. AWE should be set ON for connec… |
| 1.3.6.1.4.1.36.2.18.11.3.2.1.6 | ColumnptrmTrunkAutoPartitionStatus | read-only | mandatory | Indicates whether the trunk port has been auto-partitioned. When autopartitioned(2) a trunk is automatically wrapped. |
| 1.3.6.1.4.1.36.2.18.11.3.2.1.7 | ColumnptrmTrunkDetectedSpeed | read-only | mandatory | Indicates the speed detected on the incoming data pair. invalid(1) indicates that a valid token ring speed was not detected. notApplicable(4) indicates that th… |
| 1.3.6.1.4.1.36.2.18.11.3.2.1.8 | ColumnptrmTrunkPhantomDrive | read-only | mandatory | Indicates the state of the RingIn port's phantom current drive and return detect circuits. It is notApplicable(1) on all other trunk types. The noDrive(2) stat… |
| 1.3.6.1.4.1.36.2.18.11.3.2.1.9 | ColumnptrmTrunkPhantomDetect | read-only | mandatory | Indicates the state of the incoming phantom current detect circuit for the RingIn/RingOut Trunk. It is notApplicable(1) to all other trunk types. |
| 1.3.6.1.4.1.36.2.18.11.3.3 | TableptrmLobeTable | not-accessible | mandatory | A table with entries to manage individual end station lobe ports of the linecard. |
| 1.3.6.1.4.1.36.2.18.11.3.3.1 | RowptrmLobeEntry | not-accessible | mandatory | A lobe entry. |
| 1.3.6.1.4.1.36.2.18.11.3.3.1.1 | ColumnptrmLobeIndex | read-only | mandatory | Port number for the lobe, as it appears externally to the user, i.e. 1 for the port labeled '1'. |
| 1.3.6.1.4.1.36.2.18.11.3.3.1.2 | ColumnptrmLobeOperStatus | read-only | mandatory | Indicates whether the lobe port is wrapped or inserted into the linecard's internal ring. If the lobe port is not implemented in the linecard's current configu… |
| 1.3.6.1.4.1.36.2.18.11.3.3.1.3 | ColumnptrmLobeAdminStatus | read-write | mandatory | Used to disable the lobe port during network troubleshooting. If set to disabled(2), the lobe port is forced to wrap. This object must be set to enabled(1) for… |
| 1.3.6.1.4.1.36.2.18.11.3.3.1.4 | ColumnptrmLobeMedia | read-only | mandatory | The media type of the lobe port. Different module types have different lobe connectors. If a module implements an STP/UTP switch for lobes, this variable indic… |
| 1.3.6.1.4.1.36.2.18.11.3.3.1.5 | ColumnptrmLobeAutoWrapEnable | read-write | mandatory | Software configuration variable set by network management. Auto Wrap Enabled (AWE) should be set on(1) for connection to end stations and the RingIn ports of D… |
| 1.3.6.1.4.1.36.2.18.11.3.3.1.6 | ColumnptrmLobeAutoPartitionStatus | read-only | mandatory | Indicates whether the lobe port has been auto-partitioned. When autoPartitioned(2), a lobe is automatically wrapped. |
| 1.3.6.1.4.1.36.2.18.11.3.3.1.7 | ColumnptrmLobeDetectedSpeed | read-only | mandatory | Indicates the speed detected on the incoming data pair. If invalid(1) a valid token ring speed was not detected. If notApplicable(4), the lobe port does not im… |
| 1.3.6.1.4.1.36.2.18.11.3.3.1.8 | ColumnptrmLobePhantomDrive | read-only | mandatory | This variable is not applicable to lobe ports, and is defined only as a place holder for the corresponding trunk variable. |
| 1.3.6.1.4.1.36.2.18.11.3.3.1.9 | ColumnptrmLobePhantomDetect | read-only | mandatory | Indicates the state of the incoming phantom current detect circuit for the lobe port. Lobe ports are required to implement phantom detect circuitry; the notApp… |
| 1.3.6.1.4.1.36.2.18.11.3.4 | TableptrmMacTable | not-accessible | mandatory | A table with entries. The table has 1 entry per MAC chip it contains. |
| 1.3.6.1.4.1.36.2.18.11.3.4.1 | RowptrmMacEntry | not-accessible | mandatory | An entry for the Mac . |
| 1.3.6.1.4.1.36.2.18.11.3.4.1.1 | ColumnptrmMacIndex | read-only | mandatory | An index into the table. There is 1 entry in the table per MAC chip |
| 1.3.6.1.4.1.36.2.18.11.3.4.1.2 | ColumnptrmMacRingInterface | read-only | mandatory | Indicates the Ring Interface number corresponding to this MAC. Typically single-ring devices will have only 1 Ring Interface. Devices like the Active Retimed c… |
| 1.3.6.1.4.1.36.2.18.11.3.4.1.3 | ColumnptrmMacAddress | read-only | mandatory | The Mac address in MSB form for this interface. |
| 1.3.6.1.4.1.36.2.18.11.3.4.1.4 | ColumnptrmMacPosition | read-only | mandatory | This is the position of the Mac Chip. For modules like the DTMXM, the position of the MAC is settable via software. It can be either before port 1 (MacForward)… |
| 1.3.6.1.4.1.36.2.18.11.3.5 | NodeptrmMultiBp | |||
| 1.3.6.1.4.1.36.2.18.11.3.5.1 | ScalarptrmNumBackplanePorts | read-only | mandatory | Number of physical TokenRing backplane ports. |
| 1.3.6.1.4.1.36.2.18.11.3.5.2 | ScalarptrmNumLobePorts | read-only | mandatory | Number of lobe ports the linecard has |
| 1.3.6.1.4.1.36.2.18.11.3.5.3 | TableptrmMultiBpPortTable | not-accessible | mandatory | This table MUST be supported by TR linecards like the MIPPY, which support multiple physical Token Ring backplane ports. The number of rows in ptrmMultiBpPortT… |
| 1.3.6.1.4.1.36.2.18.11.3.5.3.1 | RowptrmMultiBpPortEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.36.2.18.11.3.5.3.1.1 | ColumnptrmMultiBpPortIndex | read-only | mandatory | Index into the table. Corresponds to backplane port number. |
| 1.3.6.1.4.1.36.2.18.11.3.5.3.1.2 | ColumnptrmMultiBpPortSpeed | read-only | mandatory | Indicates the speed at which the backplane port is operating. The port MUST have a default speed of 4Mbps or 16Mbps to support plug and play operation |
| 1.3.6.1.4.1.36.2.18.11.3.5.3.1.3 | ColumnptrmMultiBpPortForceSpeed | read-write | mandatory | This is used only for STANDALONE operation. This object selects the speed at which to token ring port operates. The value of this object is maintained across p… |