DH90-MIB
165 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter enterprises Gauge IpAddress NetworkAddress TimeTicks |
| RFC1213-MIB | DisplayString PhysAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 0.0 | Scalardh90SlotPrimarySpecific | read-only | mandatory | |
| 0.0 | Scalardh90SlotSecondarySpecific | read-only | mandatory | |
| 0.0 | NodenullSpecific | |||
| 1.3.6.1.4.1.36 | Nodedec | |||
| 1.3.6.1.4.1.36.2 | Nodeema | |||
| 1.3.6.1.4.1.36.2.18 | NodedecMIBextension | |||
| 1.3.6.1.4.1.36.2.18.3 | NodedecExp | |||
| 1.3.6.1.4.1.36.2.18.3.1 | Nodedh90 | |||
| 1.3.6.1.4.1.36.2.18.3.1.1 | Scalardh90Type | read-write | mandatory | Identifies the type of Hub defined and identifies standalone configurations managed by DECagent 90 modules. Setting this variable to invalid deletes the commun… |
| 1.3.6.1.4.1.36.2.18.3.1.2 | Scalardh90Backplane | read-only | mandatory | Media on backplane of hub. |
| 1.3.6.1.4.1.36.2.18.3.1.3 | Scalardh90LastChange | read-only | mandatory | The value of the sysUpTime at the time this hub added or removed a module. |
| 1.3.6.1.4.1.36.2.18.3.1.4 | Scalardh90NumberSlots | read-write | mandatory | Number of slots in backplane. Setting this variable to values of 1, 8 or 16 defines the size of a hub in a particular community. |
| 1.3.6.1.4.1.36.2.18.3.1.5 | Tabledh90SlotTable | not-accessible | mandatory | A list of modules installed in the DEChub 90. The number of entries is given in dh90SlotNumber. To create a new row (module) in the slot table, set a EMPTY dh9… |
| 1.3.6.1.4.1.36.2.18.3.1.5.1 | Rowdh90SlotEntry | not-accessible | mandatory | Contains objects defining characteristics of modules in the DEChub 90 |
| 1.3.6.1.4.1.36.2.18.3.1.5.1.1 | Columndh90SlotIndex | read-write | mandatory | The slot number containing the module |
| 1.3.6.1.4.1.36.2.18.3.1.5.1.2 | Columndh90SlotModuleType | read-write | mandatory | The type of the module in a slot. If the slot is known to be empty, a value of empty is used. If the slot is occupied by a module of unknown type, a value of u… |
| 1.3.6.1.4.1.36.2.18.3.1.5.1.3 | Columndh90SlotModuleName | read-write | mandatory | A textual description of the module |
| 1.3.6.1.4.1.36.2.18.3.1.5.1.4 | Columndh90SlotModuleVersion | read-only | mandatory | A textual description of the version level of the hardware and firmware of the module |
| 1.3.6.1.4.1.36.2.18.3.1.5.1.5 | Columndh90SlotCounterTime | read-only | mandatory | Time since the counters of this module were zeroed |
| 1.3.6.1.4.1.36.2.18.3.1.5.1.6 | Columndh90SlotIfBase | read-only | mandatory | An index into the ifTable for the first interface on this module. Add one to this value to reference the ifTable entry which corresponds to the second interfac… |
| 1.3.6.1.4.1.36.2.18.3.1.5.1.7 | Columndh90SlotIfNumber | read-only | mandatory | Number of interfaces on this module. |
| 1.3.6.1.4.1.36.2.18.3.1.5.1.8 | Columndh90SlotPhysicalAddress | read-write | mandatory | A read-write variable for the physical address to allow devices to be added to the hub remotely. Writing this variable as part of a remote add device routine w… |
| 1.3.6.1.4.1.36.2.18.3.1.5.1.9 | Columndh90SlotNumberOfPorts | read-only | mandatory | The number of ports on this module. Returns 8 for DECserver90L and DECrepeater90T, 6 for DECrepeater90C. |
| 1.3.6.1.4.1.36.2.18.3.1.5.1.10 | Columndh90SlotPassword | read-write | mandatory | Password used to enable privileged operations on the DECserver90L and access to the bridge. Reads to this variable will return a null string. |
| 1.3.6.1.4.1.36.2.18.3.1.5.1.11 | Columndh90SlotNewPassword | read-write | mandatory | Setting this variable causes the agent to set a new password on the terminal server using the TSNewPassword value as the new password and TSPassword as the old… |
| 1.3.6.1.4.1.36.2.18.3.1.5.1.12 | Columndh90SlotPolling | read-write | mandatory | The current polling status of the module. If the DECagent 90 is polling this device, a get of this variable will return 'on', otherwise 'off' is returned. Sett… |
| 1.3.6.1.4.1.36.2.18.3.1.6 | Tabledh90TrapAddressTable | not-accessible | mandatory | A table of IP Addresses to which this device will send traps. |
| 1.3.6.1.4.1.36.2.18.3.1.6.1 | Rowdh90TrapEntry | not-accessible | mandatory | Each entry contains an IP Address to which all SNMP Traps will be sent by this community. |
| 1.3.6.1.4.1.36.2.18.3.1.6.1.1 | Columndh90TrapAddress | read-write | mandatory | An IP Address to which all SNMP traps generated by this device will be sent. Setting a instance to a value of zero will delete the row in the table. |
| 1.3.6.1.4.1.36.2.18.3.2 | Nodeda90 | |||
| 1.3.6.1.4.1.36.2.18.3.2.1 | Scalarda90FlashErasures | read-only | mandatory | The number of times the flash memory on this DECagent 90 has been erased. This number is the total of erasures for all segments of flash. |
| 1.3.6.1.4.1.36.2.18.3.2.2 | Scalarda90Maintenance | read-write | mandatory | A control variable to reset the counters on a DECagent 90. In response to a get-request or a get-next-request, the agent always returns 'ready'. Setting the va… |
| 1.3.6.1.4.1.36.2.18.3.2.3 | Scalarda90CommunityNumber | read-only | mandatory | Number of community string-pair entries in da90HubCommStrsTable. |
| 1.3.6.1.4.1.36.2.18.3.2.4 | Tableda90CommunityTable | not-accessible | mandatory | A table of community string pairs for client hubs. |
| 1.3.6.1.4.1.36.2.18.3.2.4.1 | Rowda90CommunityEntry | not-accessible | mandatory | Contains a pair of community strings, one specifying a read-only profile, the other a read-write profile. |
| 1.3.6.1.4.1.36.2.18.3.2.4.1.1 | Columnda90CommunityIndex | read-write | mandatory | Index into hub community string pair table, identifies the community being accessed |
| 1.3.6.1.4.1.36.2.18.3.2.4.1.2 | Columnda90CommunityType | read-write | mandatory | Identifies whether the current community information in the DENMA is active for this row in the community table. Setting to invalid frees the NVRAM used to sto… |
| 1.3.6.1.4.1.36.2.18.3.2.4.1.3 | Columnda90CommunityROString | read-write | mandatory | Community string, with a read-only profile, used to access a da90's client Hub. All community strings in the read-only set must be unique. Setting such a commu… |
| 1.3.6.1.4.1.36.2.18.3.2.4.1.4 | Columnda90CommunityRWString | read-write | mandatory | Community string, with a read-write profile, used to access a da90's client Hub. All community strings in the read-only set must be unique. Setting such a comm… |
| 1.3.6.1.4.1.36.2.18.3.2.4.1.5 | Columnda90CommunityTrapString | read-write | mandatory | Community string sent with traps generated due to events caused by this community. The trap community strings do not have to be unique. This variable is read u… |
| 1.3.6.1.4.1.36.2.18.3.3 | Nodeds90L | |||
| 1.3.6.1.4.1.36.2.18.3.3.1 | Scalards90LNumberModules | read-only | mandatory | Number of DECserver 90L Modules represented in the ds90LModuleTable. |
| 1.3.6.1.4.1.36.2.18.3.3.2 | Tableds90LModuleTable | not-accessible | mandatory | A table of DECserver 90L modules installed in the group. The number of entries is given in ds90LModuleNumber. |
| 1.3.6.1.4.1.36.2.18.3.3.2.1 | Rowds90LModuleEntry | not-accessible | mandatory | Contains objects defining characteristics of DECserver 90L modules in the group |
| 1.3.6.1.4.1.36.2.18.3.3.2.1.1 | Columnds90LSlotIndex | read-only | mandatory | The slot index value which addresses the dh90SlotTable for this module. |
| 1.3.6.1.4.1.36.2.18.3.3.2.1.2 | Columnds90LDot3StatsDeferredTransmissions | read-only | mandatory | A count of frames for which the first transmission attempt on a particular interface is delayed because the medium is busy. The count represented by an instanc… |
| 1.3.6.1.4.1.36.2.18.3.3.2.1.3 | Columnds90LDot3StatsSingleCollisionFrames | read-only | mandatory | A count of successfully transmitted frames on a particular interface for which transmission is inhibited by exactly one collision. (If DS90L is implementing th… |
| 1.3.6.1.4.1.36.2.18.3.3.2.1.4 | Columnds90LDot3StatsMultipleCollsionFrames | read-only | mandatory | A count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one collision. (If DS90L is implementing … |
| 1.3.6.1.4.1.36.2.18.3.3.2.1.5 | Columnds90LEnetDataOverruns | read-only | mandatory | A count of the number of frames arriving at the DS90L lost due to data overrun since it last reinitialized or zeroed counters. |
| 1.3.6.1.4.1.36.2.18.3.3.2.1.6 | Columnds90LLatCircMsgsIns | read-only | mandatory | A count of the number of LAT circuit messages received by this DS90L since it last reinitialized or zeroed counters. |
| 1.3.6.1.4.1.36.2.18.3.3.2.1.7 | Columnds90LLatCircMsgsOuts | read-only | mandatory | A count of the number of LAT circuit messages transmitted by this DS90L since it last reinitialized or zeroed counters. |
| 1.3.6.1.4.1.36.2.18.3.3.2.1.8 | Columnds90LLatSessSolicitAccepts | read-only | mandatory | A count of the number of LAT Solicits accepted by this DS90L since it last reinitialized or zeroed counters. |
| 1.3.6.1.4.1.36.2.18.3.3.2.1.9 | Columnds90LLatSessSolicitRejects | read-only | mandatory | A count of the number of LAT Solicits rejected by this DS90L since it last reinitialized or zeroed counters. |
| 1.3.6.1.4.1.36.2.18.3.3.2.1.10 | Columnds90LLatCircDuplsMsgs | read-only | mandatory | A count of the number of duplicate LAT messages the DS90L LAT implementation has discarded since it last reinitialized or zeroed counters. |
| 1.3.6.1.4.1.36.2.18.3.3.2.1.11 | Columnds90LLatCircMsgRetransmits | read-only | mandatory | A count of the total number of LAT circuit messages this DS90L has retransmitted since it last reinitialized or zeroed counters. |
| 1.3.6.1.4.1.36.2.18.3.3.2.1.12 | Columnds90LLatSessIllegalSlots | read-only | mandatory | A count of the number of illegal LAT slots the DS90L has received on all LAT sessions since it last reinitialized or zeroed counters. |
| 1.3.6.1.4.1.36.2.18.3.3.2.1.13 | Columnds90LIllegalMulticastRcvs | read-only | mandatory | This counts the number of illegal multicast LAT messages received on this DECserver 90L since it last reinitialized or zeroed counters. |
| 1.3.6.1.4.1.36.2.18.3.3.2.1.14 | Columnds90LLatCircKeepAlive | read-only | mandatory | This defines the number of seconds the LAT circuits provider waits between transmitting LAT circuit layer keep-alive messages. Writing to this object is equiva… |
| 1.3.6.1.4.1.36.2.18.3.3.2.1.15 | Columnds90LLatCircRetransmitLimit | read-only | mandatory | This object defines the maximum number of LAT circuit message retransmissions the server will attempt before declaring the circuit failed. Writing to this obje… |
| 1.3.6.1.4.1.36.2.18.3.3.2.1.16 | Columnds90LLatCircInvalidMsgs | read-only | mandatory | This counts the number of invalid LAT messages received on its entry's LAT circuit since the DECserver90L last reinitialized or zeroed counters. |
| 1.3.6.1.4.1.36.2.18.3.3.2.1.17 | Columnds90LAuthorizeMode | read-write | mandatory | Setting this value to enable causes the SET A,password command to be sent to the DECserver 90. The module will enter authorized mode IF the power is cycled on … |
| 1.3.6.1.4.1.36.2.18.3.3.2.1.18 | Columnds90LMaintenance | read-write | mandatory | A control variable to reset the counters on a DECserver 90L. In response to a get-request or a get-next-request, the agent always returns 'ready'. Setting the … |
| 1.3.6.1.4.1.36.2.18.3.3.2.1.19 | Columnds90LPrompt | read-write | mandatory | A DECserver 90L+ (PLUS) variable. Contains the prompt displayed when a session is local to the PLUS version of the terminal server. The default value is '->'. … |
| 1.3.6.1.4.1.36.2.18.3.3.3 | Tableds90LPortTable | not-accessible | mandatory | Table of port specific variables on this DECserver90L. |
| 1.3.6.1.4.1.36.2.18.3.3.3.1 | Rowds90LPortEntry | not-accessible | mandatory | A single LAT session instance this DS90L currently provides. |
| 1.3.6.1.4.1.36.2.18.3.3.3.1.1 | Columnds90LPortIndex | read-only | mandatory | The value of charPortIndex for this port. |
| 1.3.6.1.4.1.36.2.18.3.3.3.1.2 | Columnds90LPortRemoteModification | read-write | mandatory | Enables and disables remote modification of of the port by the host system. |
| 1.3.6.1.4.1.36.2.18.3.3.3.1.3 | Columnds90LPortType | read-write | mandatory | Selects the type of device connected to the port. |
| 1.3.6.1.4.1.36.2.18.3.3.3.1.4 | Columnds90LPortBreak | read-write | mandatory | Determines if the port responds to local or remote break. |
| 1.3.6.1.4.1.36.2.18.3.3.3.1.5 | Columnds90LPortTest | read-write | mandatory | Setting this variable to enable places the port into loopback mode. Loopback mode can be used to verify that a port is receiving and sending characters. |
| 1.3.6.1.4.1.36.2.18.3.3.3.1.6 | Columnds90LPortAutoConfigure | read-write | mandatory | A DECserver 90L+ (PLUS) variable. Enables or disables the Autoconfiguration of the port, the ability of the port to autobaud. Disabling autoconfiguration also … |
| 1.3.6.1.4.1.36.2.18.3.3.3.1.7 | Columnds90LPortOnDemandLoading | read-write | mandatory | A DECserver 90L+ (PLUS) variable. Enables or disables on demand loading of fonts. The variable is not present if the server is a DECserver 90L. |
| 1.3.6.1.4.1.36.2.18.3.3.4 | Tableds90LSessionTable | not-accessible | mandatory | The list of all LAT sessions active on this DECserver90L. |
| 1.3.6.1.4.1.36.2.18.3.3.4.1 | Rowds90LSessionEntry | not-accessible | mandatory | A single LAT session instance this DS90L currently provides. |
| 1.3.6.1.4.1.36.2.18.3.3.4.1.1 | Columnds90LSessionPort | read-only | mandatory | The value of charPortIndex for the port to which this session belongs. |
| 1.3.6.1.4.1.36.2.18.3.3.4.1.2 | Columnds90LSessionIndex | read-only | mandatory | The session index in the context of the port, a non-zero positive integer. Will be 1 for the DECserver90L, 4 for DECserver 90L+. |
| 1.3.6.1.4.1.36.2.18.3.3.4.1.3 | Columnds90LSessionRemoteNode | read-only | mandatory | The name of the remote node providing the service for this session. |
| 1.3.6.1.4.1.36.2.18.3.3.4.1.4 | Columnds90LSessionService | read-only | mandatory | The service to which this session is connected. |
| 1.3.6.1.4.1.36.2.18.3.3.4.1.5 | Columnds90LSessionRemotePortId | read-only | mandatory | The name of the port at the remote node providing the connection, for instance LAT121. |
| 1.3.6.1.4.1.36.2.18.3.4 | Nodedrpt90 | |||
| 1.3.6.1.4.1.36.2.18.3.4.1 | Tabledrpt90PortTable | not-accessible | mandatory | A list of port entries. The index for a repeater port is given by (slot number*100) + port number The number of ports is given by dh90SlotTable.dh90SlotEntry. … |
| 1.3.6.1.4.1.36.2.18.3.4.1.1 | Rowdrpt90PortEntry | not-accessible | mandatory | A collection of objects containing information for a given interface. |
| 1.3.6.1.4.1.36.2.18.3.4.1.1.1 | Columndrpt90PortIndex | read-only | mandatory | Identifies the module and port. The value of this object is given by: (slot number*100) + port number |
| 1.3.6.1.4.1.36.2.18.3.4.1.1.2 | Columndrpt90PortName | read-write | mandatory | The text description of the port given by management |
| 1.3.6.1.4.1.36.2.18.3.4.1.1.3 | Columndrpt90PortAdminStatus | read-write | mandatory | The desired state of the port. |
| 1.3.6.1.4.1.36.2.18.3.4.1.1.4 | Columndrpt90PortState | read-only | mandatory | The state of the port. Unknown(1) is returned when the port state cannot be determined. AutoPartitioned(2) indicates that the repeater has disabled the port au… |
| 1.3.6.1.4.1.36.2.18.3.4.1.1.5 | Columndrpt90PortType | read-only | mandatory | The Physical Medium type of the port |
| 1.3.6.1.4.1.36.2.18.3.4.1.1.6 | Columndrpt90PortPartitionCount | read-only | mandatory | The number of times this port has partitioned. This value is only significant if drpt90PortStatus is not unknown(1). |
| 1.3.6.1.4.1.36.2.18.3.4.1.1.7 | Columndrpt90PortAutoPartitionReason | read-only | mandatory | Errors currently detected on the port. |
| 1.3.6.1.4.1.36.2.18.3.4.1.1.8 | Columndrpt90PortJamBits | read-only | mandatory | The number of jam bits being used on the port segment. |
| 1.3.6.1.4.1.36.2.18.3.4.2 | Tabledrpt90PortAddrTable | not-accessible | mandatory | A list of MAC addresses paired with the repeater port on which they have been seen. |
| 1.3.6.1.4.1.36.2.18.3.4.2.1 | Rowdrpt90PortAddrEntry | not-accessible | mandatory | A MAC addresses and the repeater port on which it resides. |
| 1.3.6.1.4.1.36.2.18.3.4.2.1.1 | Columndrpt90PortPhyAddr | read-only | mandatory | A MAC address seen on this port |
| 1.3.6.1.4.1.36.2.18.3.4.2.1.2 | Columndrpt90PortAddrIndex | read-only | mandatory | Identifies the module and port. The value of this object the same as drpt90PortIndex and is given by: (slot number*100) + port number |
| 1.3.6.1.4.1.36.2.18.3.5 | Nodedb90ext | |||
| 1.3.6.1.4.1.36.2.18.3.5.1 | Nodedb90system | |||
| 1.3.6.1.4.1.36.2.18.3.5.1.1 | NodedbSysChar | |||
| 1.3.6.1.4.1.36.2.18.3.5.1.1.1 | ScalardbSysRomVersion | read-only | mandatory | The version number of the software stored in ROM. |
| 1.3.6.1.4.1.36.2.18.3.5.1.1.2 | ScalardbSysInitSwitch | read-write | mandatory | This object allows the management action of initializing a device and forcing it to run selftest. It can also be used to reset all information added to the dev… |
| 1.3.6.1.4.1.36.2.18.3.5.1.2 | NodedbSysStatus | |||
| 1.3.6.1.4.1.36.2.18.3.5.1.2.1 | ScalardbSysDeviceState | read-only | mandatory | The operational state of the device. |
| 1.3.6.1.4.1.36.2.18.3.5.1.2.2 | ScalardbSysNvramFailed | read-only | mandatory | A flag, that, when set to True, indicates that the NVRAM failed selftest following the last initialization of the device. Values set to variables maintained on… |
| 1.3.6.1.4.1.36.2.18.3.5.2 | Nodedb90interfaces | |||
| 1.3.6.1.4.1.36.2.18.3.5.2.1 | TabledbIfTable | not-accessible | mandatory | A list of interface entries. The number of entries is given by ifNumber, defined in [2]. |
| 1.3.6.1.4.1.36.2.18.3.5.2.1.1 | RowdbIfEntry | not-accessible | mandatory | A collection of objects containing information for a given interface. |
| 1.3.6.1.4.1.36.2.18.3.5.2.1.1.1 | ColumndbIfIndex | read-only | mandatory | Identifies the Interface. The value of this the same object is as the ifIndex, defined in [2], for this interface. |
| 1.3.6.1.4.1.36.2.18.3.5.2.1.1.2 | ColumndbIfBadFramesReceived | read-only | mandatory | Number of frames received with a bad frame check sequence or the device received a frame loss indication from the hardware on the interface. |
| 1.3.6.1.4.1.36.2.18.3.5.2.1.1.3 | ColumndbIfTransmitFramesError | read-only | mandatory | Number of frames that were transmitted with an error on the line. |
| 1.3.6.1.4.1.36.2.18.3.5.3 | Nodedb90bridge | |||
| 1.3.6.1.4.1.36.2.18.3.5.3.1 | Nodedb90Char | |||
| 1.3.6.1.4.1.36.2.18.3.5.3.1.1 | Scalardb90LB100SpanningTreeVer | read-only | mandatory | The version number of the Spanning Tree algorithm used by the bridge when in the LAN Bridge 100 Spanning Tree mode. |
| 1.3.6.1.4.1.36.2.18.3.5.3.1.2 | Scalardb90802SpanningTreeVer | read-only | mandatory | The version number of the Spanning Tree algorithm used by the bridge when in the 802.1d Spanning Tree mode. |
| 1.3.6.1.4.1.36.2.18.3.5.3.1.3 | Scalardb90MaxForwardingDBEntries | read-only | mandatory | The maximum number of address entries that the bridge can store in its volatile memory. |
| 1.3.6.1.4.1.36.2.18.3.5.3.1.4 | Scalardb90MaxNVForwardingDBEntries | read-only | mandatory | The maximum number of permanent address entries that the bridge can store in its NVRAM. |
| 1.3.6.1.4.1.36.2.18.3.5.3.1.5 | Scalardb90MaxProtocolDBEntries | read-only | mandatory | The maximum number of protocol entries that the bridge can store in its protocol database. These entries control the handling of frames based on their Ethernet… |
| 1.3.6.1.4.1.36.2.18.3.5.3.1.6 | Scalardb90MaxNVProtocolDBEntries | read-only | mandatory | The maximum number of protocol entries that the bridge can store in its nonvolatile memory. These are retained after a power-down. |
| 1.3.6.1.4.1.36.2.18.3.5.3.2 | Nodedb90Stat | |||
| 1.3.6.1.4.1.36.2.18.3.5.3.2.1 | Scalardb90CurrProtocolDBEntries | read-only | mandatory | The number of protocol entries that are stored in the bridge's protocol database. These control the handling of frames based on their Ethernet protocol type, I… |
| 1.3.6.1.4.1.36.2.18.3.5.3.2.2 | Scalardb90CurrNVProtocolDBEntries | read-only | mandatory | The number of protocol entries in the bridge's NVRAM. These are retained after a power loss. |
| 1.3.6.1.4.1.36.2.18.3.5.3.2.3 | Scalardb90MgmtHeardPort | read-only | mandatory | The port on which this command was received. |
| 1.3.6.1.4.1.36.2.18.3.5.3.2.4 | Scalardb90LB100BeingPolled | read-only | mandatory | The address of the LAN Bridge 100 mode bridge that sent this bridge into the LAN Bridge 100 Spanning Tree mode. If this bridge is the Root, this object indicat… |
| 1.3.6.1.4.1.36.2.18.3.5.3.2.5 | Scalardb90TimeSinceLastHello | read-only | mandatory | The number of seconds since the bridge last sent a Hello message. |
| 1.3.6.1.4.1.36.2.18.3.5.3.2.6 | Scalardb90HubManagement | read-write | mandatory | Indicates whether the bridge is managing the hub (i.e., is capable of managing repeaters inserted in the hub). |
| 1.3.6.1.4.1.36.2.18.3.5.3.2.7 | Scalardb90CurrFdbEntries | read-only | mandatory | The number of entries currently active in the DECbridge 90 forwarding data base, or one more than the value of db90MaxForwardingDBEntries if the bridge has exc… |
| 1.3.6.1.4.1.36.2.18.3.5.3.3 | Nodedb90Coun | |||
| 1.3.6.1.4.1.36.2.18.3.5.3.3.1 | Scalardb90SpanningTreeModeChanges | read-only | mandatory | The number of times that the bridge switched from the 802.1d Spanning Tree mode to the LB100 Spanning Tree mode. |
| 1.3.6.1.4.1.36.2.18.3.5.3.4 | Nodedb90Span | |||
| 1.3.6.1.4.1.36.2.18.3.5.3.4.1 | Scalardb90BestRootAge | read-only | mandatory | The age, in hundredths of seconds, of the Hello message that established the best root. |
| 1.3.6.1.4.1.36.2.18.3.5.3.4.2 | Scalardb90TopologyChangeFlag | read-only | mandatory | A flag that indicates whether a Topology Change is currently in effect on the extended LAN. |
| 1.3.6.1.4.1.36.2.18.3.5.3.4.3 | Scalardb90TellParentFlag | read-only | mandatory | A flag that indicates if the bridge is attempting to propagate a topology change towards the Root. |
| 1.3.6.1.4.1.36.2.18.3.5.3.4.4 | Scalardb90ForwardingDBShortAgingTime | read-only | mandatory | The number of seconds that the bridge keeps learned entries active while a topology change is in effect. |
| 1.3.6.1.4.1.36.2.18.3.5.3.4.5 | Scalardb90BadHelloLimit | read-only | mandatory | The number of hello intervals during which the bridge receives one or more bad hellos on a line, before the bridge performs a test on the link. A bad Hello mes… |
| 1.3.6.1.4.1.36.2.18.3.5.3.4.6 | Scalardb90BadHelloResetTimer | read-write | mandatory | The number of Hello intervals without bad Hellos that the bridge will wait before it resets its bad Hello count to zero. |
| 1.3.6.1.4.1.36.2.18.3.5.3.4.7 | Scalardb90NoFrameInterval | read-only | mandatory | The The number of seconds of inactivity on a line that will cause the bridge to run a test on that line. The bridge considers a line to be inactive if it does … |
| 1.3.6.1.4.1.36.2.18.3.5.3.4.8 | Scalardb90LB100PollTime | read-only | mandatory | The number of seconds that a Root bridge in LAN Bridge 100 mode waits between polling the LAN Bridge 100 that is keeping it in this mode. This polling is done … |
| 1.3.6.1.4.1.36.2.18.3.5.3.4.9 | Scalardb90LB100ResponseTimeout | read-only | mandatory | The number of seconds that a Root in LAN Bridge 100 Spanning Tree mode will wait for a response from the LAN Bridge 100 which is keeping it in this mode, befor… |
| 1.3.6.1.4.1.36.2.18.3.5.3.4.10 | Scalardb90LB100SpanningTreeCompat | read-only | mandatory | A switch that controls the Spanning Tree mode used by the bridge. If in Auto-Select mode, the bridge will go into 802 Spanning Tree mode by default, but will s… |
| 1.3.6.1.4.1.36.2.18.3.5.3.5 | Nodedb90PortInterfaces | |||
| 1.3.6.1.4.1.36.2.18.3.5.3.5.1 | Tabledb90IfTable | not-accessible | mandatory | A list of interface entries. The number of entries is given by ifNumber, defined in [2]. |
| 1.3.6.1.4.1.36.2.18.3.5.3.5.1.1 | Rowdb90IfEntry | not-accessible | mandatory | A collection of objects containing information for a given interface. |
| 1.3.6.1.4.1.36.2.18.3.5.3.5.1.1.1 | Columndb90IfIndex | read-only | mandatory | Identifies the Interface. The value of this object is the same as the ifIndex, defined in [2], for this interface. |
| 1.3.6.1.4.1.36.2.18.3.5.3.5.1.1.2 | Columndb90IfDeviceFramesReceived | read-only | mandatory | The number of frames addressed to the bridge itself that were received on this line. |
| 1.3.6.1.4.1.36.2.18.3.5.3.5.1.1.3 | Columndb90IfBadHelloLimitExceeded | read-only | mandatory | The number of times that the Bad Hellos on the line exceeded the Bad Hello limit. |
| 1.3.6.1.4.1.36.2.18.3.5.3.5.2 | Tabledb90IfEtherTable | not-accessible | optional | A list of interface entries for an Ethernet port. |
| 1.3.6.1.4.1.36.2.18.3.5.3.5.2.1 | Rowdb90IfEtherEntry | not-accessible | mandatory | A collection of objects containing information for a given interface. |
| 1.3.6.1.4.1.36.2.18.3.5.3.5.2.1.1 | Columndb90IfEthIndex | read-only | mandatory | Identifies the Interface. The value of this object is the same as the ifIndex, defined in [2], for this interface. |
| 1.3.6.1.4.1.36.2.18.3.5.3.5.2.1.2 | Columndb90IfEthFramingError | read-only | mandatory | The number of times that a frame received on the line contained both a noninteger multiple of 8 bits and a CRC error. |
| 1.3.6.1.4.1.36.2.18.3.5.3.5.2.1.3 | Columndb90IfEthCarrierLoss | read-only | mandatory | The number of times that the bridge detected a loss of the carrier signal while transmitting a frame on the line. |
| 1.3.6.1.4.1.36.2.18.3.5.3.5.2.1.4 | Columndb90IfEthCollisionLimitExceeded | read-only | mandatory | The number of times that the bridge failed to transmit a frame on this line after 16 attempts, the collision limit. |
| 1.3.6.1.4.1.36.2.18.3.5.3.5.3 | Tabledb90IfSpanTable | not-accessible | mandatory | A list of interface entries for a port. |
| 1.3.6.1.4.1.36.2.18.3.5.3.5.3.1 | Rowdb90IfSpanEntry | not-accessible | mandatory | A collection of objects containing information for a given interface. |
| 1.3.6.1.4.1.36.2.18.3.5.3.5.3.1.1 | Columndb90IfSpIndex | read-only | mandatory | Identifies the Interface. The value of this object is the same as the ifIndex, defined in [2], for this interface. |
| 1.3.6.1.4.1.36.2.18.3.5.3.5.3.1.2 | Columndb90IfSpDesigRootAge | read-only | mandatory | The age, in hundreths of seconds, of the last Hello message received from the designated bridge on the line. |
| 1.3.6.1.4.1.36.2.18.3.5.3.5.3.1.3 | Columndb90IfSpForwardDelayTimer | read-only | mandatory | The time remaining, in hundreths of seconds, before the bridge will leave the Learning State of Preforwarding, and enter the Forwarding State. |
| 1.3.6.1.4.1.36.2.18.3.5.3.5.3.1.4 | Columndb90IfSpBadHelloCount | read-only | mandatory | The number of Hello intervals during which at least one Bad Hello was received. |
| 1.3.6.1.4.1.36.2.18.3.5.3.5.3.1.5 | Columndb90IfSpTopologyChangeAckFlag | read-only | mandatory | A flag that indicates whether a topology change notification received on a link that we are designated on needs to be acknowledged. |
| 1.3.6.1.4.1.36.2.18.3.5.3.6 | Nodedb90ProtoFilt | |||
| 1.3.6.1.4.1.36.2.18.3.5.3.6.1 | Scalardb90ProtoFilterOther | read-only | mandatory | Action taken by the bridge on Ethernet protocol types or the 5-byte SNAP PIDs other than those specified in the db90ProtoTable. This value defaults to forward(… |
| 1.3.6.1.4.1.36.2.18.3.5.3.6.2 | Tabledb90ProtoFilterTable | not-accessible | mandatory | A table that contains filtering information about Ethernet protocol types and 5 byte SNAP PIDs for the DECbridge 90. |
| 1.3.6.1.4.1.36.2.18.3.5.3.6.2.1 | Rowdb90ProtoFilterEntry | not-accessible | mandatory | A table that contains filtering characteristics for Ethernet protocol types and 5 byte SNAP PIDs for the DECbridge 90. |
| 1.3.6.1.4.1.36.2.18.3.5.3.6.2.1.1 | Columndb90ProtoFilterProtocol | read-write | mandatory | The protocol type or SNAP PID in a frame to which this entry's filtering information applies. The length is 2 for Ethernet protocol types and 5 for SNAP PID. |
| 1.3.6.1.4.1.36.2.18.3.5.3.6.2.1.2 | Columndb90ProtoFilterType | read-write | mandatory | The type of this entry. unknown(1) specifies that this protocol filter is unused. invalid(2) deletes the filter. ethernet(3) or snap-sap(4) defines the size of… |
| 1.3.6.1.4.1.36.2.18.3.5.3.6.2.1.3 | Columndb90ProtoFilterStatus | read-write | mandatory | Action taken by bridge when it sees this ethernet protocol type or SNAP PID in a received frame. Note that this value must be identical to db90ProtoFilterOther… |
| 1.3.6.1.4.1.36.2.18.3.5.3.6.2.1.4 | Columndb90ProtoFilterMulticastFlag | read-write | mandatory | Identifies whether or not filtering is based on the multicast bit in the MAC destination address. If allFrames(1), then filtering is performed as per db90Proto… |
| 1.3.6.1.4.1.36.2.18.3.5.3.6.2.1.5 | Columndb90ProtoFilterPortMask | read-write | mandatory | Must be allPorts(3) unless db90ProtoFilterMulticastFlag is multicastOnly, in which case any specification is valid. |