MIB Viewer

DLGHWINF-MIB

62 objects
No module-level DESCRIPTION found.
OIDNameAccessStatusDescription
1.3.6.1.4.1.3028.1.1.1NodedlgHiMibRev
1.3.6.1.4.1.3028.1.1.1.1ScalardlgHiMibRevMajorread-onlymandatoryThe Major Revision level. A change in the major revision level represents a major change in the architecture of the MIB. A change in the major revision level m…
1.3.6.1.4.1.3028.1.1.1.2ScalardlgHiMibRevMinorread-onlymandatoryThe Minor Revision level. A change in the minor revision level may represent some minor additional support. no changes to any pre-existing information has occu…
1.3.6.1.4.1.3028.1.1.1.3ScalardlgHiMibConditionread-onlymandatoryThe overall condition. This object represents the overall status of the Dialogic Hardware Information system represented by this MIB. Other - The status of the…
1.3.6.1.4.1.3028.1.1.2NodedlgHiComponent
1.3.6.1.4.1.3028.1.1.2.1NodedlgHiInterface
1.3.6.1.4.1.3028.1.1.2.1.1NodedlgHiOsCommon
1.3.6.1.4.1.3028.1.1.2.1.1.1ScalardlgHiOsCommonPollFreqread-writemandatoryThe Agent's polling frequency in seconds. The frequency, in seconds, at which the Agent updates the operational status of the individual devices within the dev…
1.3.6.1.4.1.3028.1.1.2.1.1.2ScalardlgHiOsCommonNumberOfModulesread-onlymandatoryThe number of modules in the OS Common Module table.
1.3.6.1.4.1.3028.1.1.2.1.1.3TabledlgHiOsCommonModuleTablenot-accessiblemandatoryA table of software modules that provide an interface to the devicethis MIB describes.
1.3.6.1.4.1.3028.1.1.2.1.1.3.1RowdlgHiOsCommonModuleEntrynot-accessiblemandatoryA description of a software module that provides an interface to the device this MIB describes.
1.3.6.1.4.1.3028.1.1.2.1.1.3.1.1ColumndlgHiOsCommonModuleIndexread-onlymandatoryA unique index for this module description.
1.3.6.1.4.1.3028.1.1.2.1.1.3.1.2ColumndlgHiOsCommonModuleNameread-onlymandatoryThe module name.
1.3.6.1.4.1.3028.1.1.2.1.1.3.1.3ColumndlgHiOsCommonModuleVersionread-onlymandatoryVersion of the module.
1.3.6.1.4.1.3028.1.1.2.1.1.3.1.4ColumndlgHiOsCommonModuleDateread-onlymandatoryThe module date. field octets contents range ===== ====== ======= ===== 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minute 0..59 6 7 s…
1.3.6.1.4.1.3028.1.1.2.1.1.3.1.5ColumndlgHiOsCommonModulePurposeread-onlymandatoryThe purpose of the module described in this entry.
1.3.6.1.4.1.3028.1.1.2.1.1.4ScalardlgHiOsLogEnableread-writemandatoryThe Agent's log enable bit 0 - disabled Setting this variable to this value will disable the trap logging 1 - enabled Setting this variable to this value will …
1.3.6.1.4.1.3028.1.1.2.1.1.5ScalardlgHiOsTestTrapEnableread-writemandatoryEvery time this bit is set, test trap is sent from the agent
1.3.6.1.4.1.3028.1.1.2.1.1.6ScalardlgHiIdentSystemServicesNameForTrapread-onlymandatory
1.3.6.1.4.1.3028.1.1.2.1.1.7ScalardlgHiIdentSystemServicesStatusForTrapread-onlymandatory
1.3.6.1.4.1.3028.1.1.2.1.1.8ScalardlgHiIdentIndexForTrapread-onlymandatoryAn index that uniquely specifies each device. This value is not necessarily contiguous
1.3.6.1.4.1.3028.1.1.2.1.1.9ScalardlgHiIdentModelForTrapread-onlymandatoryDialogic board Model. This is the Dialogic board's model name and can be used for identification purposes.
1.3.6.1.4.1.3028.1.1.2.1.1.10ScalardlgHiIdentOperStatusForTrapread-onlymandatoryDialogic board Operational Status. This is the overall condition of the Dialogic board. The following values are defined other(1) The board does not support bo…
1.3.6.1.4.1.3028.1.1.2.1.1.11ScalardlgHiIdentAdminStatusForTrapread-onlymandatoryDialogic board Admin Status. This is the Administrative Status of the Dialogic board. The following values are defined other(1) The board's admin status in una…
1.3.6.1.4.1.3028.1.1.2.1.1.12ScalardlgHiIdentSerNumForTrapread-onlymandatoryDialogic board Serial Number. This is the Dialogic board serial number and can be used for identification purposes. On many boards the serial number appears on…
1.3.6.1.4.1.3028.1.1.2.1.1.13ScalardlgHiIdentErrorMessageForTrapread-onlymandatoryDialogic board Error Message. This value represents the error message associated with a failing Dialogic board.
1.3.6.1.4.1.3028.1.1.2.2NodedlgHiIdent
1.3.6.1.4.1.3028.1.1.2.2.1TabledlgHiIdentTablenot-accessiblemandatoryDialogic board Identification Table.
1.3.6.1.4.1.3028.1.1.2.2.1.1RowdlgHiIdentEntrynot-accessiblemandatoryDialogic board Identification Table Entry.
1.3.6.1.4.1.3028.1.1.2.2.1.1.1ColumndlgHiIdentIndexread-onlymandatoryAn index that uniquely specifies each device. This value is not necessarily contiguous
1.3.6.1.4.1.3028.1.1.2.2.1.1.2ColumndlgHiIdentModelread-onlymandatoryDialogic board Model. This is the Dialogic board's model name and can be used for identification purposes.
1.3.6.1.4.1.3028.1.1.2.2.1.1.3ColumndlgHiIdentTyperead-onlymandatory
1.3.6.1.4.1.3028.1.1.2.2.1.1.4ColumndlgHiIdentFuncDescrread-onlymandatoryDialogic board Function Description. This provides a description of the functionality provided by the Dialogic board. If the functional description of the boar…
1.3.6.1.4.1.3028.1.1.2.2.1.1.5ColumndlgHiIdentSerNumread-onlymandatoryDialogic board Serial Number. This is the Dialogic board serial number and can be used for identification purposes. On many boards the serial number appears on…
1.3.6.1.4.1.3028.1.1.2.2.1.1.6ColumndlgHiIdentFWNameread-onlymandatoryDialogic Firmware Name. This is the name of the firmware downloaded to this Dialogic board. If multiple different firmwares are loaded the filenames will be se…
1.3.6.1.4.1.3028.1.1.2.2.1.1.7ColumndlgHiIdentFWVersread-onlymandatoryDialogic Firmware Version. This is the version of the firmware downloaded to this Dialogic board. If multiple different firmwares are loaded then each firmware…
1.3.6.1.4.1.3028.1.1.2.2.1.1.8ColumndlgHiIdentMemBaseAddrread-onlymandatoryDialogic board Base Memory Address. This is the Memory address where the Dialogic board has been installed on the system. If the Dialogic board does not use sy…
1.3.6.1.4.1.3028.1.1.2.2.1.1.9ColumndlgHiIdentIOBaseAddrread-onlymandatoryDialogic board Base I/O Port Address. This is the I/O Port address where the Dialogic board has been installed on the system. If the Dialogic board does not us…
1.3.6.1.4.1.3028.1.1.2.2.1.1.10ColumndlgHiIdentIrqread-onlymandatoryDialogic board IRQ (Interrupt) Level. This is the Interrupt Level used by the Dialogic board installed on the system. If the Dialogic board does not use an Int…
1.3.6.1.4.1.3028.1.1.2.2.1.1.11ColumndlgHiIdentBoardIDread-onlymandatoryDialogic board Board Locator ID. This is the Unique Board Locator ID set by the thumbwheel on certain Dialogic boards. This may be used for identification purp…
1.3.6.1.4.1.3028.1.1.2.2.1.1.12ColumndlgHiIdentPCISlotIDread-onlymandatoryDialogic board PCI Slot ID. This is a PCI slot identifier where the Dialogic board is installed. This may be used for identification purposes. If the Dialogic …
1.3.6.1.4.1.3028.1.1.2.2.1.1.13ColumndlgHiIdentOperStatusread-onlymandatoryDialogic board Operational Status. This is the overall condition of the Dialogic board. The following values are defined other(1) The board does not support bo…
1.3.6.1.4.1.3028.1.1.2.2.1.1.14ColumndlgHiIdentAdminStatusread-writemandatoryDialogic board Admin Status. This is the Administrative Status of the Dialogic board. The following values are defined other(1) The board's admin status in una…
1.3.6.1.4.1.3028.1.1.2.2.1.1.15ColumndlgHiIdentErrorMessageread-onlymandatoryDialogic board Error Message. This value represents the error message associated with a failing Dialogic board.
1.3.6.1.4.1.3028.1.1.2.2.1.1.16ColumndlgHiIdentDeviceChangeDateread-onlymandatoryThe date and time the boards operational status last changed. field octets contents range ===== ====== ======= ===== 1 1-2 year 0..65536 2 3 month 1..12 3 4 da…
1.3.6.1.4.1.3028.1.1.2.2.1.1.17ColumndlgHiIdentSpecificread-onlymandatoryA reference to MIB definitions specific to the particular board type specified in the row of the table If this information is not present, its value should be …
1.3.6.1.4.1.3028.1.1.2.2.1.1.18ColumndlgHiIdentPCIBusIDread-onlymandatoryDialogic board PCI Bus ID. This is a PCI Bus identifier where the Dialogic board is installed. This may be used for identification purposes. If the Dialogic bo…
1.3.6.1.4.1.3028.1.1.2.2.2ScalardlgHiIdentNumberOfDevicesread-onlymandatoryNumber of Dialogic device in the system. A device may be a physical board, a channel on a board or an embedded component on a board
1.3.6.1.4.1.3028.1.1.2.2.3ScalardlgHiIdentServiceStatusread-writemandatoryDialogic Service Status This is the overall status of the Dialogic system service. The following values are defined: other(1) The service status is unknown. st…
1.3.6.1.4.1.3028.1.1.2.2.4ScalardlgHiIdentServiceChangeDateread-onlymandatoryThe date and time the service was last started or stopped. field octets contents range ===== ====== ======= ===== 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1…
1.3.6.1.4.1.3028.1.1.2.2.5ScalardlgHiIdentTrapMaskread-writemandatoryTrap Enable mask. This variable is a bit mask which can be used to enable or disable certain enterprise specific traps. A '1' is used to enable the trap, a '0'…
1.3.6.1.4.1.3028.1.1.2.2.6TabledlgHiIdentSystemServicesTablenot-accessiblemandatoryDialogic-Related system services table.
1.3.6.1.4.1.3028.1.1.2.2.6.1RowdlgHiIdentSystemServicesEntrynot-accessiblemandatoryDialogic-Related system services table entry.
1.3.6.1.4.1.3028.1.1.2.2.6.1.1ColumndlgHiIdentSystemServicesIndexread-onlymandatoryAn index that uniquely specifies each system service. This value is not necessarily contiguous
1.3.6.1.4.1.3028.1.1.2.2.6.1.2ColumndlgHiIdentSystemServicesNameread-onlymandatorySystem Service Name. This is the name of the system service used for Identification Purposes.
1.3.6.1.4.1.3028.1.1.2.2.6.1.3ColumndlgHiIdentSystemServicesScmNameread-onlymandatorySCM System Service Name. This is the name of the system service that is given to SCM (Service Control Manager) and is used by SCM to identify the service.
1.3.6.1.4.1.3028.1.1.2.2.6.1.4ColumndlgHiIdentSystemServicesStatusread-writemandatoryService Status This is the overall status of the Dialogic system service. The following values are defined: other(1) The service status is unknown. started(2) …
1.3.6.1.4.1.3028.1.1.2.2.6.1.5ColumndlgHiIdentSystemServicesChangeDateread-onlymandatoryThe date and time the service was last started or stopped. field octets contents range ===== ====== ======= ===== 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1…
1.3.6.1.4.1.3028.1001NodedlgHiServiceChangedThe Dialogic service condition has been changed Description: The dlgHiIdentServiceChanged trap indicates that the Dialogic service has transitioned to either t…
1.3.6.1.4.1.3028.1002NodedlgHiboardStatusChangedThe condition of a Dialogic board has changed to failed or ok Description: The dlgHiIdentboardStatusChanged trap indicates that a device in the device table ha…
1.3.6.1.4.1.3028.1003NodedlgHiNonDlgcServiceChangedA Dialogic-Related service condition has been changed Description: The dlgHiNonDlgcServiceChanged trap indicates that a Dialogic-Related service (any UNIX Serv…
1.3.6.1.4.1.3028.1004NodedlgHiTestTrapThis trap is to test if the trap sending mechanism is acting properly Description: A managed node will request from the hardware agent to send this trap with t…