DOCS-IETF-RFI-MIB
238 objects
This is the MIB Module for DOCSIS 2.0 compliant Radio Frequency (RF) interfaces in Cable Modems (CM) and Cable Modem Termination Systems (CMTS).
Imported Objects
| IANAifType-MIB | IANAifType |
| IF-MIB | ifIndex InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | -- do not import BITS Counter32 Counter64 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE TimeTicks transmission Unsigned32 |
| SNMPv2-TC | MacAddress RowStatus TEXTUAL-CONVENTION TimeInterval TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.127 | IdentitydocsIfMib | This is the MIB Module for DOCSIS 2.0 compliant Radio Frequency (RF) interfaces in Cable Modems (CM) and Cable Modem Termination Systems (CMTS). | ||
| 1.3.6.1.2.1.10.127.1 | NodedocsIfMibObjects | |||
| 1.3.6.1.2.1.10.127.1.1 | NodedocsIfBaseObjects | |||
| 1.3.6.1.2.1.10.127.1.1.1 | TabledocsIfDownstreamChannelTable | not-accessible | current | This table describes the attributes of downstream channels (frequency bands). |
| 1.3.6.1.2.1.10.127.1.1.1.1 | RowdocsIfDownstreamChannelEntry | not-accessible | current | An entry provides a list of attributes for a single Downstream channel. An entry in this table exists for each ifEntry with an ifType of docsCableDownstream(12… |
| 1.3.6.1.2.1.10.127.1.1.1.1.1 | ColumndocsIfDownChannelId | read-only | current | The Cable Modem Termination System (CMTS) identification of the downstream channel within this particular MAC interface. If the interface is down, the object r… |
| 1.3.6.1.2.1.10.127.1.1.1.1.2 | ColumndocsIfDownChannelFrequency | read-write | current | The center of the downstream frequency associated with this channel. This object will return the current tuner frequency. If a CMTS provides IF output, this ob… |
| 1.3.6.1.2.1.10.127.1.1.1.1.3 | ColumndocsIfDownChannelWidth | read-write | current | The bandwidth of this downstream channel. Most implementations are expected to support a channel width of 6 MHz (North America) and/or 8 MHz (Europe). See the … |
| 1.3.6.1.2.1.10.127.1.1.1.1.4 | ColumndocsIfDownChannelModulation | read-write | current | The modulation type associated with this downstream channel. If the interface is down, this object either returns the configured value (CMTS), the most current… |
| 1.3.6.1.2.1.10.127.1.1.1.1.5 | ColumndocsIfDownChannelInterleave | read-write | current | The Forward Error Correction (FEC) interleaving used for this downstream channel. Values are defined as follows: taps8Increment16(3): protection 5.9/4.1 usec, … |
| 1.3.6.1.2.1.10.127.1.1.1.1.6 | ColumndocsIfDownChannelPower | read-write | current | At the CMTS, the operational transmit power. At the CM, the received power level. If the interface is down, this object either returns the configured value (CM… |
| 1.3.6.1.2.1.10.127.1.1.1.1.7 | ColumndocsIfDownChannelAnnex | read-only | current | The value of this object indicates the conformance of the implementation to important regional cable standards. annexA : Annex A from ITU-J83 is used. annexB :… |
| 1.3.6.1.2.1.10.127.1.1.2 | TabledocsIfUpstreamChannelTable | not-accessible | current | This table describes the attributes of attached upstream channels. |
| 1.3.6.1.2.1.10.127.1.1.2.1 | RowdocsIfUpstreamChannelEntry | not-accessible | current | List of attributes for a single upstream channel. For Docsis 2.0 CMTSs, an entry in this table exists for each ifEntry with an ifType of docsCableUpstreamChann… |
| 1.3.6.1.2.1.10.127.1.1.2.1.1 | ColumndocsIfUpChannelId | read-only | current | The CMTS identification of the upstream channel. |
| 1.3.6.1.2.1.10.127.1.1.2.1.2 | ColumndocsIfUpChannelFrequency | read-create | current | The center of the frequency band associated with this upstream interface. This object returns 0 if the frequency is undefined or unknown. Minimum permitted ups… |
| 1.3.6.1.2.1.10.127.1.1.2.1.3 | ColumndocsIfUpChannelWidth | read-create | current | The bandwidth of this upstream interface. This object returns 0 if the interface width is undefined or unknown. Minimum permitted interface width is 200,000 Hz… |
| 1.3.6.1.2.1.10.127.1.1.2.1.4 | ColumndocsIfUpChannelModulationProfile | read-create | current | An entry identical to the docsIfModIndex in the docsIfCmtsModulationTable that describes this channel. This channel is further instantiated there by a grouping… |
| 1.3.6.1.2.1.10.127.1.1.2.1.5 | ColumndocsIfUpChannelSlotSize | read-create | current | Applicable to TDMA and ATDMA channel types only. The number of 6.25 microsecond ticks in each upstream mini-slot. Returns zero if the value is undefined, unkno… |
| 1.3.6.1.2.1.10.127.1.1.2.1.6 | ColumndocsIfUpChannelTxTimingOffset | read-only | current | At the CM, a measure of the current round trip time obtained from the ranging offset (initial ranging offset + ranging offset adjustments). At the CMTS, the ma… |
| 1.3.6.1.2.1.10.127.1.1.2.1.7 | ColumndocsIfUpChannelRangingBackoffStart | read-create | current | The initial random backoff window to use when retrying Ranging Requests. Expressed as a power of 2. A value of 16 at the CMTS indicates that a proprietary adap… |
| 1.3.6.1.2.1.10.127.1.1.2.1.8 | ColumndocsIfUpChannelRangingBackoffEnd | read-create | current | The final random backoff window to use when retrying Ranging Requests. Expressed as a power of 2. A value of 16 at the CMTS indicates that a proprietary adapti… |
| 1.3.6.1.2.1.10.127.1.1.2.1.9 | ColumndocsIfUpChannelTxBackoffStart | read-create | current | The initial random backoff window to use when retrying transmissions. Expressed as a power of 2. A value of 16 at the CMTS indicates that a proprietary adaptiv… |
| 1.3.6.1.2.1.10.127.1.1.2.1.10 | ColumndocsIfUpChannelTxBackoffEnd | read-create | current | The final random backoff window to use when retrying transmissions. Expressed as a power of 2. A value of 16 at the CMTS indicates that a proprietary adaptive … |
| 1.3.6.1.2.1.10.127.1.1.2.1.11 | ColumndocsIfUpChannelScdmaActiveCodes | read-create | current | Applicable for SCDMA channel types only. Number of active codes. Returns zero for Non-SCDMA channel types. Note that legal values from 64..128 MUST be non-prim… |
| 1.3.6.1.2.1.10.127.1.1.2.1.12 | ColumndocsIfUpChannelScdmaCodesPerSlot | read-create | current | Applicable for SCDMA channel types only. The number of SCDMA codes per mini-slot. Returns zero if the value is undefined, unknown or in case of a TDMA or ATDMA… |
| 1.3.6.1.2.1.10.127.1.1.2.1.13 | ColumndocsIfUpChannelScdmaFrameSize | read-create | current | Applicable for SCDMA channel types only. SCDMA Frame size in units of spreading intervals. This value returns zero for non SCDMA Profiles. |
| 1.3.6.1.2.1.10.127.1.1.2.1.14 | ColumndocsIfUpChannelScdmaHoppingSeed | read-create | current | Applicable for SCDMA channel types only. 15 bit seed used for code hopping sequence initialization. Returns zero for non-SCDMA channel types. |
| 1.3.6.1.2.1.10.127.1.1.2.1.15 | ColumndocsIfUpChannelType | read-create | current | Defines the Upstream channel type. Given the channel type, other channel attributes can be checked for value validity at the time of entry creation and update. |
| 1.3.6.1.2.1.10.127.1.1.2.1.16 | ColumndocsIfUpChannelCloneFrom | read-create | current | Intended for use when a temporary inactive upstream table row is created for the purpose of manipulating SCDMA parameters for an active row. Refer to the descr… |
| 1.3.6.1.2.1.10.127.1.1.2.1.17 | ColumndocsIfUpChannelUpdate | read-create | current | Used to perform the transfer of adjusted SCDMA parameters from the temporary upstream row to the active upstream row indicated by the docsIfUpChannelCloneFrom … |
| 1.3.6.1.2.1.10.127.1.1.2.1.18 | ColumndocsIfUpChannelStatus | read-create | current | This object is generally intended to be used for the creation of a temporary inactive upstream row for the purpose of adjusting the SCDMA channel parameters of… |
| 1.3.6.1.2.1.10.127.1.1.2.1.19 | ColumndocsIfUpChannelPreEqEnable | read-create | current | At the CMTS, used to enable or disable pre-equalization on the upstream channel represented by this table instance. At the CM, this object is read-only and ref… |
| 1.3.6.1.2.1.10.127.1.1.3 | TabledocsIfQosProfileTable | not-accessible | current | Describes the attributes for each class of service. |
| 1.3.6.1.2.1.10.127.1.1.3.1 | RowdocsIfQosProfileEntry | not-accessible | current | Describes the attributes for a single class of service. If implemented as read-create in the Cable Modem Termination System, creation of entries in this table … |
| 1.3.6.1.2.1.10.127.1.1.3.1.1 | ColumndocsIfQosProfIndex | not-accessible | current | The index value that uniquely identifies an entry in the docsIfQosProfileTable. |
| 1.3.6.1.2.1.10.127.1.1.3.1.2 | ColumndocsIfQosProfPriority | read-create | current | A relative priority assigned to this service when allocating bandwidth. Zero indicates lowest priority and seven indicates highest priority. Interpretation of … |
| 1.3.6.1.2.1.10.127.1.1.3.1.3 | ColumndocsIfQosProfMaxUpBandwidth | read-create | current | The maximum upstream bandwidth, in bits per second, allowed for a service with this service class. Zero if there is no restriction of upstream bandwidth. MUST … |
| 1.3.6.1.2.1.10.127.1.1.3.1.4 | ColumndocsIfQosProfGuarUpBandwidth | read-create | current | Minimum guaranteed upstream bandwidth, in bits per second, allowed for a service with this service class. MUST NOT be changed while this row is active. |
| 1.3.6.1.2.1.10.127.1.1.3.1.5 | ColumndocsIfQosProfMaxDownBandwidth | read-create | current | The maximum downstream bandwidth, in bits per second, allowed for a service with this service class. Zero if there is no restriction of downstream bandwidth. M… |
| 1.3.6.1.2.1.10.127.1.1.3.1.6 | ColumndocsIfQosProfMaxTxBurst | read-create | deprecated | The maximum number of mini-slots that may be requested for a single upstream transmission. A value of zero means there is no limit. MUST NOT be changed while t… |
| 1.3.6.1.2.1.10.127.1.1.3.1.7 | ColumndocsIfQosProfBaselinePrivacy | read-create | current | Indicates whether Baseline Privacy is enabled for this service class. MUST NOT be changed while this row is active. |
| 1.3.6.1.2.1.10.127.1.1.3.1.8 | ColumndocsIfQosProfStatus | read-create | current | This is object is to used to create or delete rows in this table. This object MUST NOT be changed from active while the row is referenced by the any entry in e… |
| 1.3.6.1.2.1.10.127.1.1.3.1.9 | ColumndocsIfQosProfMaxTransmitBurst | read-create | current | The maximum number of bytes that may be requested for a single upstream transmission. A value of zero means there is no limit. Note: This value does not includ… |
| 1.3.6.1.2.1.10.127.1.1.4 | TabledocsIfSignalQualityTable | not-accessible | current | At the CM, describes the PHY signal quality of downstream channels. At the CMTS, describes the PHY signal quality of upstream channels. At the CMTS, this table… |
| 1.3.6.1.2.1.10.127.1.1.4.1 | RowdocsIfSignalQualityEntry | not-accessible | current | At the CM, describes the PHY characteristics of a downstream channel. At the CMTS, describes the PHY signal quality of an upstream channel. An entry in this ta… |
| 1.3.6.1.2.1.10.127.1.1.4.1.1 | ColumndocsIfSigQIncludesContention | read-only | current | true(1) if this CMTS includes contention intervals in the counters in this table. Always false(2) for CMs. |
| 1.3.6.1.2.1.10.127.1.1.4.1.2 | ColumndocsIfSigQUnerroreds | read-only | current | Codewords received on this channel without error. This includes all codewords, whether or not they were part of frames destined for this device. |
| 1.3.6.1.2.1.10.127.1.1.4.1.3 | ColumndocsIfSigQCorrecteds | read-only | current | Codewords received on this channel with correctable errors. This includes all codewords, whether or not they were part of frames destined for this device. |
| 1.3.6.1.2.1.10.127.1.1.4.1.4 | ColumndocsIfSigQUncorrectables | read-only | current | Codewords received on this channel with uncorrectable errors. This includes all codewords, whether or not they were part of frames destined for this device. |
| 1.3.6.1.2.1.10.127.1.1.4.1.5 | ColumndocsIfSigQSignalNoise | read-only | current | Signal/Noise ratio as perceived for this channel. At the CM, describes the Signal/Noise of the downstream channel. At the CMTS, describes the average Signal/No… |
| 1.3.6.1.2.1.10.127.1.1.4.1.6 | ColumndocsIfSigQMicroreflections | read-only | current | Total microreflections including in-channel response as perceived on this interface, measured in dBc below the signal level. This object is not assumed to retu… |
| 1.3.6.1.2.1.10.127.1.1.4.1.7 | ColumndocsIfSigQEqualizationData | read-only | current | At the CM, returns the equalization data for the downstream channel. At the CMTS, returns the average equalization data for the upstream channel. Returns an em… |
| 1.3.6.1.2.1.10.127.1.1.4.1.8 | ColumndocsIfSigQExtUnerroreds | read-only | current | Codewords received on this channel without error. This includes all codewords, whether or not they were part of frames destined for this device. This is the 64… |
| 1.3.6.1.2.1.10.127.1.1.4.1.9 | ColumndocsIfSigQExtCorrecteds | read-only | current | Codewords received on this channel with correctable errors. This includes all codewords, whether or not they were part of frames destined for this device. This… |
| 1.3.6.1.2.1.10.127.1.1.4.1.10 | ColumndocsIfSigQExtUncorrectables | read-only | current | Codewords received on this channel with uncorrectable errors. This includes all codewords, whether or not they were part of frames destined for this device. Th… |
| 1.3.6.1.2.1.10.127.1.1.5 | ScalardocsIfDocsisBaseCapability | read-only | current | Indication of the DOCSIS capability of the device. This object mirrors docsIfDocsisCapability from the DocsIfExt mib. |
| 1.3.6.1.2.1.10.127.1.2 | NodedocsIfCmObjects | |||
| 1.3.6.1.2.1.10.127.1.2.1 | TabledocsIfCmMacTable | not-accessible | current | Describes the attributes of each CM MAC interface, extending the information available from ifEntry. |
| 1.3.6.1.2.1.10.127.1.2.1.1 | RowdocsIfCmMacEntry | not-accessible | current | An entry containing objects describing attributes of each MAC entry, extending the information in ifEntry. An entry in this table exists for each ifEntry with … |
| 1.3.6.1.2.1.10.127.1.2.1.1.1 | ColumndocsIfCmCmtsAddress | read-only | current | Identifies the CMTS that is believed to control this MAC domain. At the CM, this will be the source address from SYNC, MAP, and other MAC-layer messages. If th… |
| 1.3.6.1.2.1.10.127.1.2.1.1.2 | ColumndocsIfCmCapabilities | read-only | current | Identifies the capabilities of the MAC implementation at this interface. Note that packet transmission is always supported. Therefore, there is no specific bit… |
| 1.3.6.1.2.1.10.127.1.2.1.1.3 | ColumndocsIfCmRangingRespTimeout | read-write | obsolete | Waiting time for a Ranging Response packet. |
| 1.3.6.1.2.1.10.127.1.2.1.1.4 | ColumndocsIfCmRangingTimeout | read-write | current | Waiting time for a Ranging Response packet. |
| 1.3.6.1.2.1.10.127.1.2.2 | TabledocsIfCmStatusTable | not-accessible | current | This table maintains a number of status objects and counters for Cable Modems. |
| 1.3.6.1.2.1.10.127.1.2.2.1 | RowdocsIfCmStatusEntry | not-accessible | current | A set of status objects and counters for a single MAC layer instance in a Cable Modem. An entry in this table exists for each ifEntry with an ifType of docsCab… |
| 1.3.6.1.2.1.10.127.1.2.2.1.1 | ColumndocsIfCmStatusValue | read-only | current | Current Cable Modem connectivity state, as specified in the RF Interface Specification. Interpretations for state values 1-12 are clearly outlined in the SP-RF… |
| 1.3.6.1.2.1.10.127.1.2.2.1.2 | ColumndocsIfCmStatusCode | read-only | current | Status code for this Cable Modem as defined in the OSSI Specification. The status code consists of a single character indicating error groups, followed by a tw… |
| 1.3.6.1.2.1.10.127.1.2.2.1.3 | ColumndocsIfCmStatusTxPower | read-only | current | The operational transmit power for the attached upstream channel. |
| 1.3.6.1.2.1.10.127.1.2.2.1.4 | ColumndocsIfCmStatusResets | read-only | current | Number of times the CM reset or initialized this interface. |
| 1.3.6.1.2.1.10.127.1.2.2.1.5 | ColumndocsIfCmStatusLostSyncs | read-only | current | Number of times the CM lost synchronization with the downstream channel. |
| 1.3.6.1.2.1.10.127.1.2.2.1.6 | ColumndocsIfCmStatusInvalidMaps | read-only | current | Number of times the CM received invalid MAP messages. |
| 1.3.6.1.2.1.10.127.1.2.2.1.7 | ColumndocsIfCmStatusInvalidUcds | read-only | current | Number of times the CM received invalid UCD messages. |
| 1.3.6.1.2.1.10.127.1.2.2.1.8 | ColumndocsIfCmStatusInvalidRangingResponses | read-only | current | Number of times the CM received invalid ranging response messages. |
| 1.3.6.1.2.1.10.127.1.2.2.1.9 | ColumndocsIfCmStatusInvalidRegistrationResponses | read-only | current | Number of times the CM received invalid registration response messages. |
| 1.3.6.1.2.1.10.127.1.2.2.1.10 | ColumndocsIfCmStatusT1Timeouts | read-only | current | Number of times counter T1 expired in the CM. |
| 1.3.6.1.2.1.10.127.1.2.2.1.11 | ColumndocsIfCmStatusT2Timeouts | read-only | current | Number of times counter T2 expired in the CM. |
| 1.3.6.1.2.1.10.127.1.2.2.1.12 | ColumndocsIfCmStatusT3Timeouts | read-only | current | Number of times counter T3 expired in the CM. |
| 1.3.6.1.2.1.10.127.1.2.2.1.13 | ColumndocsIfCmStatusT4Timeouts | read-only | current | Number of times counter T4 expired in the CM. |
| 1.3.6.1.2.1.10.127.1.2.2.1.14 | ColumndocsIfCmStatusRangingAborteds | read-only | current | Number of times the ranging process was aborted by the CMTS. |
| 1.3.6.1.2.1.10.127.1.2.2.1.15 | ColumndocsIfCmStatusDocsisOperMode | read-only | current | Indication whether the device has registered using 1.0 Class of Service or 1.1 Quality of Service. An unregistered CM should indicate 1.1 QOS for a docsIfDocsi… |
| 1.3.6.1.2.1.10.127.1.2.2.1.16 | ColumndocsIfCmStatusModulationType | read-only | current | Indicates modulation type status currently used by the CM. Since this object specifically identifies PHY mode, the shared upstream channel type is not permitte… |
| 1.3.6.1.2.1.10.127.1.2.2.1.17 | ColumndocsIfCmStatusEqualizationData | read-only | current | Pre-equalization data for this CM after convolution with data indicated in the RNG-RSP. Returns an empty string if the value is unknown or if there is no equal… |
| 1.3.6.1.2.1.10.127.1.2.3 | TabledocsIfCmServiceTable | not-accessible | current | Describes the attributes of each upstream service queue on a CM. |
| 1.3.6.1.2.1.10.127.1.2.3.1 | RowdocsIfCmServiceEntry | not-accessible | current | Describes the attributes of an upstream bandwidth service queue. An entry in this table exists for each Service ID. The primary index is an ifIndex with an ifT… |
| 1.3.6.1.2.1.10.127.1.2.3.1.1 | ColumndocsIfCmServiceId | not-accessible | current | Identifies a service queue for upstream bandwidth. The attributes of this service queue are shared between the CM and the CMTS. The CMTS allocates upstream ban… |
| 1.3.6.1.2.1.10.127.1.2.3.1.2 | ColumndocsIfCmServiceQosProfile | read-only | current | The index in docsIfQosProfileTable describing the quality of service attributes associated with this particular service. If no associated entry in docsIfQosPro… |
| 1.3.6.1.2.1.10.127.1.2.3.1.3 | ColumndocsIfCmServiceTxSlotsImmed | read-only | current | The number of upstream mini-slots which have been used to transmit data PDUs in immediate (contention) mode. This includes only those PDUs that are presumed to… |
| 1.3.6.1.2.1.10.127.1.2.3.1.4 | ColumndocsIfCmServiceTxSlotsDed | read-only | current | The number of upstream mini-slots which have been used to transmit data PDUs in dedicated mode (i.e., as a result of a unicast Data Grant). |
| 1.3.6.1.2.1.10.127.1.2.3.1.5 | ColumndocsIfCmServiceTxRetries | read-only | current | The number of attempts to transmit data PDUs containing requests for acknowledgment that did not result in acknowledgment. |
| 1.3.6.1.2.1.10.127.1.2.3.1.6 | ColumndocsIfCmServiceTxExceededs | read-only | current | The number of data PDUs transmission failures due to excessive retries without acknowledgment. |
| 1.3.6.1.2.1.10.127.1.2.3.1.7 | ColumndocsIfCmServiceRqRetries | read-only | current | The number of attempts to transmit bandwidth requests which did not result in acknowledgment. |
| 1.3.6.1.2.1.10.127.1.2.3.1.8 | ColumndocsIfCmServiceRqExceededs | read-only | current | The number of requests for bandwidth which failed due to excessive retries without acknowledgment. |
| 1.3.6.1.2.1.10.127.1.2.3.1.9 | ColumndocsIfCmServiceExtTxSlotsImmed | read-only | current | The number of upstream mini-slots which have been used to transmit data PDUs in immediate (contention) mode. This includes only those PDUs that are presumed to… |
| 1.3.6.1.2.1.10.127.1.2.3.1.10 | ColumndocsIfCmServiceExtTxSlotsDed | read-only | current | The number of upstream mini-slots which have been used to transmit data PDUs in dedicated mode (i.e., as a result of a unicast Data Grant). |
| 1.3.6.1.2.1.10.127.1.3 | NodedocsIfCmtsObjects | |||
| 1.3.6.1.2.1.10.127.1.3.1 | TabledocsIfCmtsMacTable | not-accessible | current | Describes the attributes of each CMTS MAC interface, extending the information available from ifEntry. Mandatory for all CMTS devices. |
| 1.3.6.1.2.1.10.127.1.3.1.1 | RowdocsIfCmtsMacEntry | not-accessible | current | An entry containing objects describing attributes of each MAC entry, extending the information in ifEntry. An entry in this table exists for each ifEntry with … |
| 1.3.6.1.2.1.10.127.1.3.1.1.1 | ColumndocsIfCmtsCapabilities | read-only | current | Identifies the capabilities of the CMTS MAC implementation at this interface. Note that packet transmission is always supported. Therefore, there is no specifi… |
| 1.3.6.1.2.1.10.127.1.3.1.1.2 | ColumndocsIfCmtsSyncInterval | read-write | current | The interval between CMTS transmission of successive SYNC messages at this interface. |
| 1.3.6.1.2.1.10.127.1.3.1.1.3 | ColumndocsIfCmtsUcdInterval | read-write | current | The interval between CMTS transmission of successive Upstream Channel Descriptor messages for each upstream channel at this interface. |
| 1.3.6.1.2.1.10.127.1.3.1.1.4 | ColumndocsIfCmtsMaxServiceIds | read-only | current | The maximum number of service IDs that may be simultaneously active. |
| 1.3.6.1.2.1.10.127.1.3.1.1.5 | ColumndocsIfCmtsInsertionInterval | read-write | obsolete | The amount of time to elapse between each broadcast station maintenance grant. Broadcast station maintenance grants are used to allow new cable modems to join … |
| 1.3.6.1.2.1.10.127.1.3.1.1.6 | ColumndocsIfCmtsInvitedRangingAttempts | read-write | current | The maximum number of attempts to make on invitations for ranging requests. A value of zero means the system should attempt to range forever. |
| 1.3.6.1.2.1.10.127.1.3.1.1.7 | ColumndocsIfCmtsInsertInterval | read-write | current | The amount of time to elapse between each broadcast station maintenance grant. Broadcast station maintenance grants are used to allow new cable modems to join … |
| 1.3.6.1.2.1.10.127.1.3.2 | TabledocsIfCmtsStatusTable | not-accessible | current | For the MAC layer, this group maintains a number of status objects and counters. |
| 1.3.6.1.2.1.10.127.1.3.2.1 | RowdocsIfCmtsStatusEntry | not-accessible | current | Status entry for a single MAC layer. An entry in this table exists for each ifEntry with an ifType of docsCableMaclayer(127). |
| 1.3.6.1.2.1.10.127.1.3.2.1.1 | ColumndocsIfCmtsStatusInvalidRangeReqs | read-only | current | This object counts invalid RNG-REQ messages received on this interface. |
| 1.3.6.1.2.1.10.127.1.3.2.1.2 | ColumndocsIfCmtsStatusRangingAborteds | read-only | current | This object counts ranging attempts that were explicitly aborted by the CMTS. |
| 1.3.6.1.2.1.10.127.1.3.2.1.3 | ColumndocsIfCmtsStatusInvalidRegReqs | read-only | current | This object counts invalid REG-REQ messages received on this interface. That is, syntax, out of range parameters, or erroneous requests. |
| 1.3.6.1.2.1.10.127.1.3.2.1.4 | ColumndocsIfCmtsStatusFailedRegReqs | read-only | current | This object counts failed registration attempts. Included are docsIfCmtsStatusInvalidRegReqs, authentication and class of service failures. |
| 1.3.6.1.2.1.10.127.1.3.2.1.5 | ColumndocsIfCmtsStatusInvalidDataReqs | read-only | current | This object counts invalid data request messages received on this interface. |
| 1.3.6.1.2.1.10.127.1.3.2.1.6 | ColumndocsIfCmtsStatusT5Timeouts | read-only | current | This object counts the number of times counter T5 expired on this interface. |
| 1.3.6.1.2.1.10.127.1.3.3 | TabledocsIfCmtsCmStatusTable | not-accessible | current | A set of objects in the CMTS, maintained for each Cable Modem connected to this CMTS. |
| 1.3.6.1.2.1.10.127.1.3.3.1 | RowdocsIfCmtsCmStatusEntry | not-accessible | current | Status information for a single Cable Modem. An entry in this table exists for each Cable Modem that is connected to the CMTS implementing this table. |
| 1.3.6.1.2.1.10.127.1.3.3.1.1 | ColumndocsIfCmtsCmStatusIndex | not-accessible | current | Index value to uniquely identify an entry in this table. For an individual Cable Modem, this index value should not change during CMTS uptime. |
| 1.3.6.1.2.1.10.127.1.3.3.1.2 | ColumndocsIfCmtsCmStatusMacAddress | read-only | current | MAC address of this Cable Modem. If the Cable Modem has multiple MAC addresses, this is the MAC address associated with the Cable interface. |
| 1.3.6.1.2.1.10.127.1.3.3.1.3 | ColumndocsIfCmtsCmStatusIpAddress | read-only | deprecated | IP address of this Cable Modem. If the Cable Modem has no IP address assigned, or the IP address is unknown, this object returns a value of 0.0.0.0. If the Cab… |
| 1.3.6.1.2.1.10.127.1.3.3.1.4 | ColumndocsIfCmtsCmStatusDownChannelIfIndex | read-only | current | IfIndex of the downstream channel this CM is connected to. If the downstream channel is unknown, this object returns a value of zero. |
| 1.3.6.1.2.1.10.127.1.3.3.1.5 | ColumndocsIfCmtsCmStatusUpChannelIfIndex | read-only | current | IfIndex of the upstream channel this CM is connected to. If the upstream channel is unknown, this object returns a value of zero. |
| 1.3.6.1.2.1.10.127.1.3.3.1.6 | ColumndocsIfCmtsCmStatusRxPower | read-only | current | The receive power as perceived for upstream data from this Cable Modem. If the receive power is unknown, this object returns a value of zero. |
| 1.3.6.1.2.1.10.127.1.3.3.1.7 | ColumndocsIfCmtsCmStatusTimingOffset | read-only | current | A measure of the current round trip time for this CM. Used for timing of CM upstream transmissions to ensure synchronized arrivals at the CMTS. Units are in te… |
| 1.3.6.1.2.1.10.127.1.3.3.1.8 | ColumndocsIfCmtsCmStatusEqualizationData | read-only | current | Equalization data for this CM. Returns an empty string if the value is unknown or if there is no equalization data available or defined. |
| 1.3.6.1.2.1.10.127.1.3.3.1.9 | ColumndocsIfCmtsCmStatusValue | read-only | current | Current Cable Modem connectivity state, as specified in the RF Interface Specification. Returned status information is the CM status as assumed by the CMTS, an… |
| 1.3.6.1.2.1.10.127.1.3.3.1.10 | ColumndocsIfCmtsCmStatusUnerroreds | read-only | current | Codewords received without error from this Cable Modem. |
| 1.3.6.1.2.1.10.127.1.3.3.1.11 | ColumndocsIfCmtsCmStatusCorrecteds | read-only | current | Codewords received with correctable errors from this Cable Modem. |
| 1.3.6.1.2.1.10.127.1.3.3.1.12 | ColumndocsIfCmtsCmStatusUncorrectables | read-only | current | Codewords received with uncorrectable errors from this Cable Modem. |
| 1.3.6.1.2.1.10.127.1.3.3.1.13 | ColumndocsIfCmtsCmStatusSignalNoise | read-only | current | Signal/Noise ratio as perceived for upstream data from this Cable Modem. If the Signal/Noise is unknown, this object returns a value of zero. |
| 1.3.6.1.2.1.10.127.1.3.3.1.14 | ColumndocsIfCmtsCmStatusMicroreflections | read-only | current | Total microreflections including in-channel response as perceived on this interface, measured in dBc below the signal level. This object is not assumed to retu… |
| 1.3.6.1.2.1.10.127.1.3.3.1.15 | ColumndocsIfCmtsCmStatusExtUnerroreds | read-only | current | Codewords received without error from this Cable Modem. |
| 1.3.6.1.2.1.10.127.1.3.3.1.16 | ColumndocsIfCmtsCmStatusExtCorrecteds | read-only | current | Codewords received with correctable errors from this Cable Modem. |
| 1.3.6.1.2.1.10.127.1.3.3.1.17 | ColumndocsIfCmtsCmStatusExtUncorrectables | read-only | current | Codewords received with uncorrectable errors from this Cable Modem. |
| 1.3.6.1.2.1.10.127.1.3.3.1.18 | ColumndocsIfCmtsCmStatusDocsisRegMode | read-only | current | Indication whether the CM has registered using 1.0 Class of Service or 1.1 Quality of Service. This object mirrors docsIfCmtsCmStatusDocsisMode from the docsIf… |
| 1.3.6.1.2.1.10.127.1.3.3.1.19 | ColumndocsIfCmtsCmStatusModulationType | read-only | current | Indicates modulation type currently used by the CM. Since this object specifically identifies PHY mode, the shared type is not permitted. If the upstream chann… |
| 1.3.6.1.2.1.10.127.1.3.3.1.20 | ColumndocsIfCmtsCmStatusInetAddressType | read-only | current | The type of internet address of docsIfCmtsCmStatusInetAddress. If the cable modem Internet address is unassigned or unknown, then the value of this object is u… |
| 1.3.6.1.2.1.10.127.1.3.3.1.21 | ColumndocsIfCmtsCmStatusInetAddress | read-only | current | Internet address of this Cable Modem. If the Cable Modem has no Internet address assigned, or the Internet address is unknown, the value of this object is the … |
| 1.3.6.1.2.1.10.127.1.3.4 | TabledocsIfCmtsServiceTable | not-accessible | current | Describes the attributes of upstream service queues in a Cable Modem Termination System. |
| 1.3.6.1.2.1.10.127.1.3.4.1 | RowdocsIfCmtsServiceEntry | not-accessible | current | Describes the attributes of a single upstream bandwidth service queue. Entries in this table exist for each ifEntry with an ifType of docsCableMaclayer(127), a… |
| 1.3.6.1.2.1.10.127.1.3.4.1.1 | ColumndocsIfCmtsServiceId | not-accessible | current | Identifies a service queue for upstream bandwidth. The attributes of this service queue are shared between the Cable Modem and the Cable Modem Termination Syst… |
| 1.3.6.1.2.1.10.127.1.3.4.1.2 | ColumndocsIfCmtsServiceCmStatusIndex | read-only | deprecated | Pointer to an entry in docsIfCmtsCmStatusTable identifying the Cable Modem using this Service Queue. If multiple Cable Modems are using this Service Queue, the… |
| 1.3.6.1.2.1.10.127.1.3.4.1.3 | ColumndocsIfCmtsServiceAdminStatus | read-write | current | Allows a service class for a particular modem to be suppressed, (re-)enabled, or deleted altogether. |
| 1.3.6.1.2.1.10.127.1.3.4.1.4 | ColumndocsIfCmtsServiceQosProfile | read-only | current | The index in docsIfQosProfileTable describing the quality of service attributes associated with this particular service. If no associated docsIfQosProfileTable… |
| 1.3.6.1.2.1.10.127.1.3.4.1.5 | ColumndocsIfCmtsServiceCreateTime | read-only | current | The value of sysUpTime when this entry was created. |
| 1.3.6.1.2.1.10.127.1.3.4.1.6 | ColumndocsIfCmtsServiceInOctets | read-only | current | The cumulative number of Packet Data octets received on this Service ID. The count does not include the size of the Cable MAC header |
| 1.3.6.1.2.1.10.127.1.3.4.1.7 | ColumndocsIfCmtsServiceInPackets | read-only | current | The cumulative number of Packet Data packets received on this Service ID. |
| 1.3.6.1.2.1.10.127.1.3.4.1.8 | ColumndocsIfCmtsServiceNewCmStatusIndex | read-only | current | Pointer (via docsIfCmtsCmStatusIndex) to an entry in docsIfCmtsCmStatusTable identifying the Cable Modem using this Service Queue. If multiple Cable Modems are… |
| 1.3.6.1.2.1.10.127.1.3.5 | TabledocsIfCmtsModulationTable | not-accessible | current | Describes a modulation profile associated with one or more upstream channels. |
| 1.3.6.1.2.1.10.127.1.3.5.1 | RowdocsIfCmtsModulationEntry | not-accessible | current | Describes a modulation profile for an Interval Usage Code for one or more upstream channels. Entries in this table are created by the operator. Initial default… |
| 1.3.6.1.2.1.10.127.1.3.5.1.1 | ColumndocsIfCmtsModIndex | not-accessible | current | An index into the Channel Modulation table representing a group of Interval Usage Codes, all associated with the same channel. |
| 1.3.6.1.2.1.10.127.1.3.5.1.2 | ColumndocsIfCmtsModIntervalUsageCode | not-accessible | current | An index into the Channel Modulation table which, when grouped with other Interval Usage Codes, fully instantiate all modulation sets for a given upstream chan… |
| 1.3.6.1.2.1.10.127.1.3.5.1.3 | ColumndocsIfCmtsModControl | read-create | current | Controls and reflects the status of rows in this table. |
| 1.3.6.1.2.1.10.127.1.3.5.1.4 | ColumndocsIfCmtsModType | read-create | current | The modulation type used on this channel. Returns other(1) if the modulation type is neither qpsk, qam16, qam8, qam32, qam64 or qam128. Type qam128 is used for… |
| 1.3.6.1.2.1.10.127.1.3.5.1.5 | ColumndocsIfCmtsModPreambleLen | read-create | current | The preamble length for this modulation profile in bits. Default value is the minimum needed by the implementation at the CMTS for the given modulation profile. |
| 1.3.6.1.2.1.10.127.1.3.5.1.6 | ColumndocsIfCmtsModDifferentialEncoding | read-create | current | Specifies whether or not differential encoding is used on this channel. |
| 1.3.6.1.2.1.10.127.1.3.5.1.7 | ColumndocsIfCmtsModFECErrorCorrection | read-create | current | The number of correctable errored bytes (t) used in forward error correction code. The value of 0 indicates no correction is employed. The number of check byte… |
| 1.3.6.1.2.1.10.127.1.3.5.1.8 | ColumndocsIfCmtsModFECCodewordLength | read-create | current | The number of data bytes (k) in the forward error correction codeword. This object is not used if docsIfCmtsModFECErrorCorrection is zero. |
| 1.3.6.1.2.1.10.127.1.3.5.1.9 | ColumndocsIfCmtsModScramblerSeed | read-create | current | The 15 bit seed value for the scrambler polynomial. |
| 1.3.6.1.2.1.10.127.1.3.5.1.10 | ColumndocsIfCmtsModMaxBurstSize | read-create | current | The maximum number of mini-slots that can be transmitted during this channel's burst time. Returns zero if the burst length is bounded by the allocation MAP ra… |
| 1.3.6.1.2.1.10.127.1.3.5.1.11 | ColumndocsIfCmtsModGuardTimeSize | read-only | current | The number of symbol-times which must follow the end of this channel's burst. Default value is the minimum time needed by the implementation for this modulatio… |
| 1.3.6.1.2.1.10.127.1.3.5.1.12 | ColumndocsIfCmtsModLastCodewordShortened | read-create | current | Indicates if the last FEC codeword is truncated. |
| 1.3.6.1.2.1.10.127.1.3.5.1.13 | ColumndocsIfCmtsModScrambler | read-create | current | Indicates if the scrambler is employed. |
| 1.3.6.1.2.1.10.127.1.3.5.1.14 | ColumndocsIfCmtsModByteInterleaverDepth | read-create | current | ATDMA Byte Interleaver Depth (Ir). This object returns 1 for non ATDMA profiles. |
| 1.3.6.1.2.1.10.127.1.3.5.1.15 | ColumndocsIfCmtsModByteInterleaverBlockSize | read-create | current | ATDMA Byte Interleaver Block size (Br). This object returns zero for non ATDMA profiles |
| 1.3.6.1.2.1.10.127.1.3.5.1.16 | ColumndocsIfCmtsModPreambleType | read-create | current | Preamble type for DOCSIS 2.0 bursts |
| 1.3.6.1.2.1.10.127.1.3.5.1.17 | ColumndocsIfCmtsModTcmErrorCorrectionOn | read-create | current | Trellis Code Modulation (TCM) On/Off. This value returns false for non S-CDMA profiles. |
| 1.3.6.1.2.1.10.127.1.3.5.1.18 | ColumndocsIfCmtsModScdmaInterleaverStepSize | read-create | current | S-CDMA Interleaver step size. This value returns zero for non S-CDMA profiles. |
| 1.3.6.1.2.1.10.127.1.3.5.1.19 | ColumndocsIfCmtsModScdmaSpreaderEnable | read-create | current | S-CDMA spreader. This value returns false for non S-CDMA profiles. Default value for IUC 3 and 4 is OFF, for all other IUCs it is ON. |
| 1.3.6.1.2.1.10.127.1.3.5.1.20 | ColumndocsIfCmtsModScdmaSubframeCodes | read-create | current | S-CDMA sub-frame size. This value returns zero for non S-CDMA profiles. |
| 1.3.6.1.2.1.10.127.1.3.5.1.21 | ColumndocsIfCmtsModChannelType | read-create | current | Describes the modulation channel type for this modulation entry. |
| 1.3.6.1.2.1.10.127.1.3.6 | ScalardocsIfCmtsQosProfilePermissions | read-write | current | This object specifies permitted methods of creating entries in docsIfQosProfileTable. CreateByManagement(0) is set if entries can be created using SNMP. Update… |
| 1.3.6.1.2.1.10.127.1.3.7 | TabledocsIfCmtsMacToCmTable | not-accessible | current | This is a table to provide a quick access index into the docsIfCmtsCmStatusTable. There is exactly one row in this table for each row in the docsIfCmtsCmStatus… |
| 1.3.6.1.2.1.10.127.1.3.7.1 | RowdocsIfCmtsMacToCmEntry | not-accessible | current | A row in the docsIfCmtsMacToCmTable. An entry in this table exists for each Cable Modem that is connected to the CMTS implementing this table. |
| 1.3.6.1.2.1.10.127.1.3.7.1.1 | ColumndocsIfCmtsCmMac | not-accessible | current | The RF side MAC address for the referenced CM. (E.g. the interface on the CM that has docsCableMacLayer(127) as its ifType. |
| 1.3.6.1.2.1.10.127.1.3.7.1.2 | ColumndocsIfCmtsCmPtr | read-only | current | An row index into docsIfCmtsCmStatusTable. When queried with the correct instance value (e.g. a CM's MAC address), returns the index in docsIfCmtsCmStatusTable… |
| 1.3.6.1.2.1.10.127.1.3.8 | ScalardocsIfCmtsChannelUtilizationInterval | read-write | current | The time interval in seconds over which the channel utilization index is calculated. All upstream/downstream channels use the same docsIfCmtsChannelUtilization… |
| 1.3.6.1.2.1.10.127.1.3.9 | TabledocsIfCmtsChannelUtilizationTable | not-accessible | current | Reports utilization statistics for attached upstream and downstream physical channels. |
| 1.3.6.1.2.1.10.127.1.3.9.1 | RowdocsIfCmtsChannelUtilizationEntry | not-accessible | current | Utilization statistics for a single upstream or downstream physical channel. An entry exists in this table for each ifEntry with an ifType equal to docsCableDo… |
| 1.3.6.1.2.1.10.127.1.3.9.1.1 | ColumndocsIfCmtsChannelUtIfType | not-accessible | current | The secondary index into this table. Indicates the IANA interface type associated with this physical channel. Only docsCableDownstreamInterface (128) and docsC… |
| 1.3.6.1.2.1.10.127.1.3.9.1.2 | ColumndocsIfCmtsChannelUtId | not-accessible | current | The tertiary index into this table. Indicates the CMTS identifier for this physical channel. |
| 1.3.6.1.2.1.10.127.1.3.9.1.3 | ColumndocsIfCmtsChannelUtUtilization | read-only | current | The calculated and truncated utilization index for this physical upstream or downstream channel, accurate as of the most recent docsIfCmtsChannelUtilizationInt… |
| 1.3.6.1.2.1.10.127.1.3.10 | TabledocsIfCmtsDownChannelCounterTable | not-accessible | current | This table is implemented at the CMTS to collect downstream channel statistics for utilization calculations. |
| 1.3.6.1.2.1.10.127.1.3.10.1 | RowdocsIfCmtsDownChannelCounterEntry | not-accessible | current | An entry provides a list of traffic counters for a single downstream channel. An entry in this table exists for each ifEntry with an ifType of docsCableDownstr… |
| 1.3.6.1.2.1.10.127.1.3.10.1.1 | ColumndocsIfCmtsDownChnlCtrId | read-only | current | The Cable Modem Termination System (CMTS) identification of the downstream channel within this particular MAC interface. If the interface is down, the object r… |
| 1.3.6.1.2.1.10.127.1.3.10.1.2 | ColumndocsIfCmtsDownChnlCtrTotalBytes | read-only | current | At the CMTS, the total number of bytes in the Payload portion of MPEG Packets (ie. not including MPEG header or pointer_field) transported by this downstream c… |
| 1.3.6.1.2.1.10.127.1.3.10.1.3 | ColumndocsIfCmtsDownChnlCtrUsedBytes | read-only | current | At the CMTS, the total number of DOCSIS data bytes transported by this downstream channel since CMTS initialization. The number of data bytes is defined as the… |
| 1.3.6.1.2.1.10.127.1.3.10.1.4 | ColumndocsIfCmtsDownChnlCtrExtTotalBytes | read-only | current | At the CMTS, the total number of bytes in the Payload portion of MPEG Packets (ie. not including MPEG header or pointer_field) transported by this downstream c… |
| 1.3.6.1.2.1.10.127.1.3.10.1.5 | ColumndocsIfCmtsDownChnlCtrExtUsedBytes | read-only | current | At the CMTS, the total number of DOCSIS data bytes transported by this downstream channel since CMTS initialization. The number of data bytes is defined as the… |
| 1.3.6.1.2.1.10.127.1.3.11 | TabledocsIfCmtsUpChannelCounterTable | not-accessible | current | This table is implemented at the CMTS to provide upstream channel statistics appropriate for channel utilization calculations. |
| 1.3.6.1.2.1.10.127.1.3.11.1 | RowdocsIfCmtsUpChannelCounterEntry | not-accessible | current | List of traffic statistics for a single upstream channel. For Docsis 2.0 CMTSs, an entry in this table exists for each ifEntry with an ifType of docsCableUpstr… |
| 1.3.6.1.2.1.10.127.1.3.11.1.1 | ColumndocsIfCmtsUpChnlCtrId | read-only | current | The CMTS identification of the upstream channel. |
| 1.3.6.1.2.1.10.127.1.3.11.1.2 | ColumndocsIfCmtsUpChnlCtrTotalMslots | read-only | current | Current count, from CMTS initialization, of all minislots defined for this upstream logical channel. This count includes all IUCs and SIDs, even those allocate… |
| 1.3.6.1.2.1.10.127.1.3.11.1.3 | ColumndocsIfCmtsUpChnlCtrUcastGrantedMslots | read-only | current | Current count, from CMTS initialization, of unicast granted minislots on the upstream logical channel, regardless of burst type. Unicast granted minislots are … |
| 1.3.6.1.2.1.10.127.1.3.11.1.4 | ColumndocsIfCmtsUpChnlCtrTotalCntnMslots | read-only | current | Current count, from CMTS initialization, of contention minislots defined for this upstream logical channel. This count includes all minislots assigned to a bro… |
| 1.3.6.1.2.1.10.127.1.3.11.1.5 | ColumndocsIfCmtsUpChnlCtrUsedCntnMslots | read-only | current | Current count, from CMTS initialization, of contention minislots utilized on the upstream logical channel. For contention regions, utilized minislots are those… |
| 1.3.6.1.2.1.10.127.1.3.11.1.6 | ColumndocsIfCmtsUpChnlCtrExtTotalMslots | read-only | current | Current count, from CMTS initialization, of all minislots defined for this upstream logical channel. This count includes all IUCs and SIDs, even those allocate… |
| 1.3.6.1.2.1.10.127.1.3.11.1.7 | ColumndocsIfCmtsUpChnlCtrExtUcastGrantedMslots | read-only | current | Current count, from CMTS initialization, of unicast granted minislots on the upstream logical channel, regardless of burst type. Unicast granted minislots are … |
| 1.3.6.1.2.1.10.127.1.3.11.1.8 | ColumndocsIfCmtsUpChnlCtrExtTotalCntnMslots | read-only | current | Current count, from CMTS initialization, of contention minislots defined for this upstream logical channel. This count includes all minislots assigned to a bro… |
| 1.3.6.1.2.1.10.127.1.3.11.1.9 | ColumndocsIfCmtsUpChnlCtrExtUsedCntnMslots | read-only | current | Current count, from CMTS initialization, of contention minislots utilized on the upstream logical channel. For contention regions, utilized minislots are those… |
| 1.3.6.1.2.1.10.127.1.3.11.1.10 | ColumndocsIfCmtsUpChnlCtrCollCntnMslots | read-only | current | Current count, from CMTS initialization, of contention minislots subjected to collisions on the upstream logical channel. For contention regions, these are the… |
| 1.3.6.1.2.1.10.127.1.3.11.1.11 | ColumndocsIfCmtsUpChnlCtrTotalCntnReqMslots | read-only | current | Current count, from CMTS initialization, of contention request minislots defined for this upstream logical channel. This count includes all minislots for IUC1 … |
| 1.3.6.1.2.1.10.127.1.3.11.1.12 | ColumndocsIfCmtsUpChnlCtrUsedCntnReqMslots | read-only | current | Current count, from CMTS initialization, of contention request minislots utilized on this upstream logical channel. This count includes all contention minislot… |
| 1.3.6.1.2.1.10.127.1.3.11.1.13 | ColumndocsIfCmtsUpChnlCtrCollCntnReqMslots | read-only | current | Current count, from CMTS initialization, of contention request minislots subjected to collisions on this upstream logical channel. This includes all contention… |
| 1.3.6.1.2.1.10.127.1.3.11.1.14 | ColumndocsIfCmtsUpChnlCtrTotalCntnReqDataMslots | read-only | current | Current count, from CMTS initialization, of contention request data minislots defined for this upstream logical channel. This count includes all minislots for … |
| 1.3.6.1.2.1.10.127.1.3.11.1.15 | ColumndocsIfCmtsUpChnlCtrUsedCntnReqDataMslots | read-only | current | Current count, from CMTS initialization, of contention request data minislots utilized on this upstream logical channel. This includes all contention minislots… |
| 1.3.6.1.2.1.10.127.1.3.11.1.16 | ColumndocsIfCmtsUpChnlCtrCollCntnReqDataMslots | read-only | current | Current count, from CMTS initialization, of contention request data minislots subjected to collisions on this upstream logical channel. This includes all conte… |
| 1.3.6.1.2.1.10.127.1.3.11.1.17 | ColumndocsIfCmtsUpChnlCtrTotalCntnInitMaintMslots | read-only | current | Current count, from CMTS initialization, of contention initial maintenance minislots defined for this upstream logical channel. This includes all minislots for… |
| 1.3.6.1.2.1.10.127.1.3.11.1.18 | ColumndocsIfCmtsUpChnlCtrUsedCntnInitMaintMslots | read-only | current | Current count, from CMTS initialization, of contention initial maintenance minislots utilized on this upstream logical channel. This includes all contention mi… |
| 1.3.6.1.2.1.10.127.1.3.11.1.19 | ColumndocsIfCmtsUpChnlCtrCollCntnInitMaintMslots | read-only | current | Current count, from CMTS initialization, of contention initial maintenance minislots subjected to collisions on this upstream logical channel. This includes al… |
| 1.3.6.1.2.1.10.127.1.3.11.1.20 | ColumndocsIfCmtsUpChnlCtrExtCollCntnMslots | read-only | current | Current count, from CMTS initialization, of collision contention minislots on the upstream logical channel. For contention regions, these are the minislots app… |
| 1.3.6.1.2.1.10.127.1.3.11.1.21 | ColumndocsIfCmtsUpChnlCtrExtTotalCntnReqMslots | read-only | current | Current count, from CMTS initialization, of contention request minislots defined for this upstream logical channel. This count includes all minislots for IUC1 … |
| 1.3.6.1.2.1.10.127.1.3.11.1.22 | ColumndocsIfCmtsUpChnlCtrExtUsedCntnReqMslots | read-only | current | Current count, from CMTS initialization, of contention request minislots utilized on this upstream logical channel. This count includes all contention minislot… |
| 1.3.6.1.2.1.10.127.1.3.11.1.23 | ColumndocsIfCmtsUpChnlCtrExtCollCntnReqMslots | read-only | current | Current count, from CMTS initialization, of contention request minislots subjected to collisions on this upstream logical channel. This includes all contention… |
| 1.3.6.1.2.1.10.127.1.3.11.1.24 | ColumndocsIfCmtsUpChnlCtrExtTotalCntnReqDataMslots | read-only | current | Current count, from CMTS initialization, of contention request data minislots defined for this upstream logical channel. This count includes all minislots for … |
| 1.3.6.1.2.1.10.127.1.3.11.1.25 | ColumndocsIfCmtsUpChnlCtrExtUsedCntnReqDataMslots | read-only | current | Current count, from CMTS initialization, of contention request data minislots utilized on this upstream logical channel. This includes all contention minislots… |
| 1.3.6.1.2.1.10.127.1.3.11.1.26 | ColumndocsIfCmtsUpChnlCtrExtCollCntnReqDataMslots | read-only | current | Current count, from CMTS initialization, of contention request data minislots subjected to collisions on this upstream logical channel. This includes all conte… |
| 1.3.6.1.2.1.10.127.1.3.11.1.27 | ColumndocsIfCmtsUpChnlCtrExtTotalCntnInitMaintMslots | read-only | current | Current count, from CMTS initialization, of initial maintenance minislots defined for this upstream logical channel. This count includes all minislots for IUC3… |
| 1.3.6.1.2.1.10.127.1.3.11.1.28 | ColumndocsIfCmtsUpChnlCtrExtUsedCntnInitMaintMslots | read-only | current | Current count, from CMTS initialization, of initial maintenance minislots utilized on this upstream logical channel. This includes all contention minislots for… |
| 1.3.6.1.2.1.10.127.1.3.11.1.29 | ColumndocsIfCmtsUpChnlCtrExtCollCntnInitMaintMslots | read-only | current | Current count, from CMTS initialization, of contention initial maintenance minislots subjected to collisions on this upstream logical channel. This includes al… |
| 1.3.6.1.2.1.10.127.2 | NodedocsIfNotification | |||
| 1.3.6.1.2.1.10.127.3 | NodedocsIfConformance | |||
| 1.3.6.1.2.1.10.127.3.1 | NodedocsIfCompliances | |||
| 1.3.6.1.2.1.10.127.3.1.1 | CompliancedocsIfBasicCompliance | read-only | current | The compliance statement for devices that implement MCNS/DOCSIS compliant Radio Frequency Interfaces. |
| 1.3.6.1.2.1.10.127.3.2 | NodedocsIfGroups | |||
| 1.3.6.1.2.1.10.127.3.2.1 | GroupdocsIfBasicGroup | current | Group of objects implemented in both Cable Modems and Cable Modem Termination Systems. | |
| 1.3.6.1.2.1.10.127.3.2.2 | GroupdocsIfCmGroup | current | Group of objects implemented in Cable Modems. | |
| 1.3.6.1.2.1.10.127.3.2.3 | GroupdocsIfCmtsGroup | current | Group of objects implemented in Cable Modem Termination Systems. | |
| 1.3.6.1.2.1.10.127.3.3 | NodedocsIfCompliancesV2 | |||
| 1.3.6.1.2.1.10.127.3.3.1 | CompliancedocsIfBasicComplianceV2 | read-only | current | The compliance statement for devices that implement MCNS/DOCSIS compliant Radio Frequency Interfaces. |
| 1.3.6.1.2.1.10.127.3.4 | NodedocsIfGroupsV2 | |||
| 1.3.6.1.2.1.10.127.3.4.1 | GroupdocsIfBasicGroupV2 | current | Group of objects implemented in both Cable Modems and Cable Modem Termination Systems. | |
| 1.3.6.1.2.1.10.127.3.4.2 | GroupdocsIfCmGroupV2 | current | Group of objects implemented in Cable Modems. | |
| 1.3.6.1.2.1.10.127.3.4.3 | GroupdocsIfCmtsGroupV2 | current | Group of objects implemented in Cable Modem Termination Systems. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DocsisQosVersion | INTEGER { docsis10 (1), docsis11 (2) } | current | Indicates the quality of service level. |
| DocsisUpstreamType | INTEGER { unknown (0), tdma (1), atdma (2), scdma (3), tdmaAndAtdma (4) } | current | Indicates the DOCSIS Upstream Channel Type. |
| DocsisUpstreamTypeStatus | INTEGER { unknown (0), tdma (1), atdma (2), scdma (3) } | current | Indicates the DOCSIS Upstream Channel Type Status. The shared channel indicator type is not valid, since this type is used to specifically identify PHY mode. |
| DocsisVersion | INTEGER { docsis10 (1), docsis11 (2), docsis20 (3) } | current | Indicates the DOCSIS version number. |
| TenthdB | Integer32 | current | This data type represents power levels that are normally expressed in dB. Units are in tenths of a dB; for example, 5.1 dB will be represented as 51. |
| TenthdBmV | Integer32 | current | This data type represents power levels that are normally expressed in dBmV. Units are in tenths of a dBmV; for example, 5.1 dBmV will be represented as 51. |