DOCS-PNM-MIB
384 objects
This MIB module contains management objects for the management of DOCSIS 3.1 Proactive Network Maintenance. Copyright 2015-2023 Cable Television Laboratories, Inc. All rights reserved.
Imported Objects
| CLAB-DEF-MIB | clabProjDocsis |
| DOCS-IF-MIB | -- RFC 4001 TenthdB |
| DOCS-IF3-MIB | docsIf3CmSpectrumAnalysisCtrlCmd |
| DOCS-IF31-MIB | -- RFC 4546 DsOfdmModulationType |
| IF-MIB | -- RFC 3411 ifIndex InterfaceIndex InterfaceIndexOrZero |
| INET-ADDRESS-MIB | -- RFC 1517 InetAddressType InetAddress |
| SNMP-FRAMEWORK-MIB | -- RFC 2580 SnmpAdminString |
| SNMPv2-CONF | -- RFC 2579 OBJECT-GROUP MODULE-COMPLIANCE |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | -- RFC 2578 TEXTUAL-CONVENTION DateAndTime MacAddress RowStatus TimeStamp TruthValue |
| URI-TC-MIB | -- RFC 2863 Uri |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4491.2.1.20.1.34.10 | ScalardocsIf3CmSpectrumAnalysisCtrlCmdFileEnable | read-write | current | This attribute, when set to 'true', causes the CM to begin a Spectrum Analysis measurement with the parameters defined by the docsIf3CmSpectrumAnalysisCtrlCmd … |
| 1.3.6.1.4.1.4491.2.1.20.1.34.11 | ScalardocsIf3CmSpectrumAnalysisCtrlCmdMeasStatus | read-only | current | This attribute is used to determine the status of the measurement. An application server will query this value to determine when the file is ready for transfer. |
| 1.3.6.1.4.1.4491.2.1.20.1.34.12 | ScalardocsIf3CmSpectrumAnalysisCtrlCmdFileName | read-write | current | This attribute is the name of the file containing the spectrum analysis data. This value can only be changed while a test is not in progress. An attempt to set… |
| 1.3.6.1.4.1.4491.2.1.27 | IdentitydocsPnmMIB | This MIB module contains management objects for the management of DOCSIS 3.1 Proactive Network Maintenance. Copyright 2015-2023 Cable Television Laboratories, … | ||
| 1.3.6.1.4.1.4491.2.1.27.0 | NodedocsPnmNotifications | |||
| 1.3.6.1.4.1.4491.2.1.27.1 | NodedocsPnmMibObjects | |||
| 1.3.6.1.4.1.4491.2.1.27.1.1 | NodedocsPnmBulkData | |||
| 1.3.6.1.4.1.4491.2.1.27.1.1.1 | NodedocsPnmBulkCtl | |||
| 1.3.6.1.4.1.4491.2.1.27.1.1.1.1 | ScalardocsPnmBulkDestIpAddrType | read-write | current | This object represents the IP address type of the 'docsPnmBulkDestIpAddr' object. This value is of type InetAddressType which is defined by RFC4001. Allowed va… |
| 1.3.6.1.4.1.4491.2.1.27.1.1.1.2 | ScalardocsPnmBulkDestIpAddr | read-write | current | This object represents the IP address of the server to which the bulk data file is to be sent. This attribute is further defined by the 'docsPnmBulkDestIpAddrT… |
| 1.3.6.1.4.1.4491.2.1.27.1.1.1.3 | ScalardocsPnmBulkDestPath | read-write | current | This object represents the path, excluding the filename, at the server to which the captured data file is to be sent. The CM must NOT allow the value of docsPn… |
| 1.3.6.1.4.1.4491.2.1.27.1.1.1.4 | ScalardocsPnmBulkUploadControl | read-write | current | This attribute controls the action taken by the device when a new bulk data file is generated. The possible values are defined below. noAutoUpload - Bulk Data … |
| 1.3.6.1.4.1.4491.2.1.27.1.1.1.5 | TabledocsPnmCcapBulkDataControlTable | not-accessible | deprecated | This table provides the configuration attributes needed for the device to upload Bulk Data files to a Server. |
| 1.3.6.1.4.1.4491.2.1.27.1.1.1.5.1 | RowdocsPnmCcapBulkDataControlEntry | not-accessible | deprecated | The conceptual row of the 'docsPnmCcapBulkDataControlTable'. |
| 1.3.6.1.4.1.4491.2.1.27.1.1.1.5.1.1 | ColumndocsPnmCcapBulkDataControlServerIndex | not-accessible | deprecated | This attribute is the index for the table. |
| 1.3.6.1.4.1.4491.2.1.27.1.1.1.5.1.2 | ColumndocsPnmCcapBulkDataControlDestIpAddrType | read-write | deprecated | This attribute represents the IP address type of the 'docsPnmCcapBulkDataControlDestIpAddr'attribute. This value is of type InetAddressType which is defined by… |
| 1.3.6.1.4.1.4491.2.1.27.1.1.1.5.1.3 | ColumndocsPnmCcapBulkDataControlDestIpAddr | read-write | deprecated | This attribute represents the IP address of the PNM server to which the bulk data file is to be sent. This attribute is further defined by the docsPnmCcapBulkD… |
| 1.3.6.1.4.1.4491.2.1.27.1.1.1.5.1.4 | ColumndocsPnmCcapBulkDataControlDestPath | read-write | deprecated | This attribute represents the path, excluding the filename, at the PNM server to which the captured data file is to be sent. By default, the value of this attr… |
| 1.3.6.1.4.1.4491.2.1.27.1.1.1.5.1.5 | ColumndocsPnmCcapBulkDataControlUploadControl | read-write | deprecated | This attribute controls the action taken by the device when a new bulk data file is generated. The possible values are defined below. noAutoUpload - Bulk Data … |
| 1.3.6.1.4.1.4491.2.1.27.1.1.1.5.1.6 | ColumndocsPnmCcapBulkDataControlPnmTestSelector | read-write | deprecated | This attribute permits to associate a group of PNM tests to the selected PNM server. The CCAP should reject configuration that associates more than one PNM ser… |
| 1.3.6.1.4.1.4491.2.1.27.1.1.2 | TabledocsPnmBulkFileTable | not-accessible | current | This table provides the objects needed for the device to upload a bulk data file to the Server. This object is a table with a row for each file that is availab… |
| 1.3.6.1.4.1.4491.2.1.27.1.1.2.1 | RowdocsPnmBulkFileEntry | not-accessible | current | The conceptual row of the 'docsPnmBulkFileTable'. An instance is dynamically created and exists for each file that is available for upload. The device must cre… |
| 1.3.6.1.4.1.4491.2.1.27.1.1.2.1.1 | ColumndocsPnmBulkFileIndex | not-accessible | current | This object is the index for the table. |
| 1.3.6.1.4.1.4491.2.1.27.1.1.2.1.2 | ColumndocsPnmBulkFileName | read-only | current | This object contains the name of the bulk data file stored in the device, that is available to be uploaded to the server. Filenames are defined by the applicat… |
| 1.3.6.1.4.1.4491.2.1.27.1.1.2.1.3 | ColumndocsPnmBulkFileControl | read-write | current | This object controls the action taken by the device regarding the file specified by the 'docsPnmBulkFileName' object. When a value is written to this object fo… |
| 1.3.6.1.4.1.4491.2.1.27.1.1.2.1.4 | ColumndocsPnmBulkFileUploadStatus | read-only | current | This attribute reflects the status of the bulk data file. The possible values are listed below. other(1) - Any condition not covered by the other defined value… |
| 1.3.6.1.4.1.4491.2.1.27.1.1.3 | NodedocsPnmBulkFileTransfer | |||
| 1.3.6.1.4.1.4491.2.1.27.1.1.3.1 | TabledocsPnmBulkDataTransferCfgTable | not-accessible | current | This table defines the configuration of destinations for Telemetry data, such as PNM test result measurements. The CCAP MUST support creation and deletion of m… |
| 1.3.6.1.4.1.4491.2.1.27.1.1.3.1.1 | RowdocsPnmBulkDataTransferCfgEntry | not-accessible | current | The conceptual row of the 'docsPnmBulkDataTransferCfgTable'. An instance is created and exists for each destination where PNM test result measurements are to b… |
| 1.3.6.1.4.1.4491.2.1.27.1.1.3.1.1.1 | ColumndocsPnmBulkDataTransferCfgDestIndex | not-accessible | current | This key uniquely identifies a destination for PNM test result measurements. |
| 1.3.6.1.4.1.4491.2.1.27.1.1.3.1.1.2 | ColumndocsPnmBulkDataTransferCfgDestHostname | read-create | current | This attribute contains the IP address or a fully qualified domain name (FQDN) assigned to the destination host for PNM test result measurements. |
| 1.3.6.1.4.1.4491.2.1.27.1.1.3.1.1.3 | ColumndocsPnmBulkDataTransferCfgDestHostIpAddrType | read-create | current | This attribute indicates the type of the Internet address for the destination host. If the user configures IpAddrType and IpAddress, they need not configure Ho… |
| 1.3.6.1.4.1.4491.2.1.27.1.1.3.1.1.4 | ColumndocsPnmBulkDataTransferCfgDestHostIpAddress | read-create | current | This attribute indicates the destination host IP address. If specified, it must be preceeded by the IpAddrType. If the user configures IpAddrType and IpAddress… |
| 1.3.6.1.4.1.4491.2.1.27.1.1.3.1.1.5 | ColumndocsPnmBulkDataTransferCfgDestPort | read-create | current | This attribute identifies a destination port number for PNM test result measurements. If the value of LocalStore is 'false', the attributes for DestHostname or… |
| 1.3.6.1.4.1.4491.2.1.27.1.1.3.1.1.6 | ColumndocsPnmBulkDataTransferCfgDestBaseUri | read-create | current | This attribute identifies a destination base Uniform Resource Identifier for PNM test result measurements. This attribute does not contain the actual filename.… |
| 1.3.6.1.4.1.4491.2.1.27.1.1.3.1.1.7 | ColumndocsPnmBulkDataTransferCfgProtocol | read-write | current | This attribute identifies the data transfer protocol for the PNM test result measurements. If the value of LocalStore is 'false', this object must be configure… |
| 1.3.6.1.4.1.4491.2.1.27.1.1.3.1.1.8 | ColumndocsPnmBulkDataTransferCfgLocalStore | read-create | current | This attribute identifies whether the device stores PNM test result measurements locally. If the valueIf the value of LocalStore is 'false', the attributes for… |
| 1.3.6.1.4.1.4491.2.1.27.1.1.3.1.1.9 | ColumndocsPnmBulkDataTransferCfgRowStatus | read-create | current | The conceptual row status for this table. |
| 1.3.6.1.4.1.4491.2.1.27.1.1.3.2 | TabledocsPnmBulkFileStatusTable | not-accessible | current | This table reports the status attributes for each Telemetry data file stored locally on the target device. |
| 1.3.6.1.4.1.4491.2.1.27.1.1.3.2.1 | RowdocsPnmBulkFileStatusEntry | not-accessible | current | The conceptual row of the 'docsPnmBulkFileStatusTable'. An instance is dynamically created and exists for each file that is available for upload. The device mu… |
| 1.3.6.1.4.1.4491.2.1.27.1.1.3.2.1.1 | ColumndocsPnmBulkFileStatusIndex | not-accessible | current | This key attribute is the index for the table. |
| 1.3.6.1.4.1.4491.2.1.27.1.1.3.2.1.2 | ColumndocsPnmBulkFileStatusLocalFilename | read-only | current | This attribute contains the name of the bulk data file stored in the device, that is available to be uploaded to the server. Filenames are defined by the appli… |
| 1.3.6.1.4.1.4491.2.1.27.1.1.3.2.1.3 | ColumndocsPnmBulkFileStatusFileStatus | read-only | current | This attribute reflects the status of the bulk data file. The possible values are listed below. other(1) - Any condition not covered by the other defined value… |
| 1.3.6.1.4.1.4491.2.1.27.1.1.3.2.1.4 | ColumndocsPnmBulkFileStatusDateCreated | read-only | current | The date when the file was written. |
| 1.3.6.1.4.1.4491.2.1.27.1.1.3.3 | TabledocsPnmBulkFileMgmtTable | not-accessible | current | This table represents actions to be taken to manage files on a target device. |
| 1.3.6.1.4.1.4491.2.1.27.1.1.3.3.1 | RowdocsPnmBulkFileMgmtEntry | not-accessible | current | The conceptual row of the 'docsPnmBulkFileMgmtTable'. Entries are created in this table based on an index in the BulkFileStatusTable. |
| 1.3.6.1.4.1.4491.2.1.27.1.1.3.3.1.1 | ColumndocsPnmBulkFileMgmtControl | read-create | current | The operator management operation on the file. The actions are as follows: abortFileUpload(1) - This operations aborts, or cancels, a pending file upload or an… |
| 1.3.6.1.4.1.4491.2.1.27.1.1.3.3.1.2 | ColumndocsPnmBulkFileMgmtDestIndex | read-write | current | The destination index of the corresponding entry in the docsPnmBulkDataTransferCfgTable. This is only applicable to an uploadFile request. |
| 1.3.6.1.4.1.4491.2.1.27.1.1.3.3.1.3 | ColumndocsPnmBulkFileMgmtDeleteFile | read-write | current | This parameter is a Boolean flag indicating whether the target device is to retain the file in local storage. If set to 'true', the target device will delete t… |
| 1.3.6.1.4.1.4491.2.1.27.1.2 | NodedocsPnmCmObjects | |||
| 1.3.6.1.4.1.4491.2.1.27.1.2.1 | NodedocsPnmCmControlObjects | |||
| 1.3.6.1.4.1.4491.2.1.27.1.2.1.1 | ScalardocsPnmCmCtlTest | read-only | current | This attribute represents the current PNM test. The value could represent the current test in-progress or if no test is running, the last test that was attempt… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.1.2 | ScalardocsPnmCmCtlTestDuration | read-only | current | This attribute represents the number of seconds that the test specified in 'PnmCmCtlTest' spent with a 'PnmCmCtlStatus' of 'testInProgress'. This serves to pro… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.1.3 | ScalardocsPnmCmCtlStatus | read-only | current | This attribute represents the overall status of the PNM test platform. Individual tests, within the PNM test suite, have their own specific objects to start an… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.2 | TabledocsPnmCmDsOfdmSymCapTable | not-accessible | current | The purpose of downstream symbol capture is to provide partial functionality of a network analyzer to analyze the response of the cable plant from the CM's per… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.2.1 | RowdocsPnmCmDsOfdmSymCapEntry | not-accessible | current | The conceptual row of the docsPnmCmDsOfdmSymCapTable. An instance is dynamically created and exists for an associated ifIndex of the physical downstream channe… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.2.1.1 | ColumndocsPnmCmDsOfdmSymTrigEnable | read-write | current | If this attribute is set to a value of 'true' the CM must begin looking for the presence of the Trigger Message Block in the PLC with a Group ID matching the C… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.2.1.2 | ColumndocsPnmCmDsOfdmSymTrigEnableTimeout | read-write | current | This attribute is used to disable the TrigEnable if no PLC containing a Group ID matching the CM's TrigGroupId in a Trigger Message Block is received within th… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.2.1.3 | ColumndocsPnmCmDsOfdmSymTrigGroupId | read-write | current | This attribute is used to associate a CM with a group of CMs expected to perform Symbol Capture measurements for the designated symbol. This value can only be … |
| 1.3.6.1.4.1.4491.2.1.27.1.2.2.1.4 | ColumndocsPnmCmDsOfdmSymRxWindowing | read-only | current | This attribute is a flag indicating if vendor proprietary receiver windowing was enabled during the capture. |
| 1.3.6.1.4.1.4491.2.1.27.1.2.2.1.5 | ColumndocsPnmCmDsOfdmSymTransactionId | read-only | current | This attribute is the Transaction ID sent by the CMTS in the Trigger Message Block. The CMTS increments this field by one on each trigger message that is sent,… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.2.1.6 | ColumndocsPnmCmDsOfdmSymSampleRate | read-only | current | This attribute is the FFT sample rate in use by the CM for the channel. Typically the sample rate for the downstream channel will be 204.8MHz. |
| 1.3.6.1.4.1.4491.2.1.27.1.2.2.1.7 | ColumndocsPnmCmDsOfdmSymFftLength | read-only | current | This attribute is the FFT length in use by the CM for the channel; typically this value is 4096 or 8192 for the Downstream Channel. |
| 1.3.6.1.4.1.4491.2.1.27.1.2.2.1.8 | ColumndocsPnmCmDsOfdmSymMeasStatus | read-only | current | This attribute is used to determine the status of the measurement. The PNM server will query this value to determine when the file is ready for transfer. |
| 1.3.6.1.4.1.4491.2.1.27.1.2.2.1.9 | ColumndocsPnmCmDsOfdmSymCaptFileName | read-write | current | This attribute is the name of the file, at the CM and containing captured symbol data, which is to be downloaded by the PNM server. This value can only be chan… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.3 | TabledocsPnmCmOfdmChanEstCoefTable | not-accessible | current | The purpose of this table is for the CM to report its estimate of the downstream channel response. The reciprocals of the channel response coefficients are typ… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.3.1 | RowdocsPnmCmOfdmChanEstCoefEntry | not-accessible | current | The conceptual row of the docsPnmCmOfdmChanEstCoefTable. An instance is dynamically created and exists for an associated ifIndex of the physical downstream cha… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.3.1.1 | ColumndocsPnmCmOfdmChEstCoefTrigEnable | read-write | current | Setting this object to a value of 'true' instructs the CM to begin collection and storing the channel estimate coefficients into the file specified by the 'doc… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.3.1.2 | ColumndocsPnmCmOfdmChEstCoefAmpRipplePkToPk | read-only | current | This attribute represents the value of the peak to peak ripple in the magnitude of the equalizer coefficients [PHYv3.1]. The slope component calculated for the… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.3.1.3 | ColumndocsPnmCmOfdmChEstCoefAmpRippleRms | read-only | current | This attribute represents the value of the RMS ripple in the magnitude of the equalizer coefficients. The slope component calculated for the AmplitudeSlope is … |
| 1.3.6.1.4.1.4491.2.1.27.1.2.3.1.4 | ColumndocsPnmCmOfdmChEstCoefAmpSlope | read-only | current | This attribute represents the slope in 0.001 dB per MHz in the magnitude of the equalizer coefficients. The slope is calculated as the slope of a linear least … |
| 1.3.6.1.4.1.4491.2.1.27.1.2.3.1.5 | ColumndocsPnmCmOfdmChEstCoefGrpDelayRipplePkToPk | read-only | current | This attribute represents the peak-to-peak group delay ripple expressed in units of 0.001 nsec. This attribute represents the group delay variation across the … |
| 1.3.6.1.4.1.4491.2.1.27.1.2.3.1.6 | ColumndocsPnmCmOfdmChEstCoefGrpDelayRippleRms | read-only | current | This attribute represents the RMS value of the group delay ripple expressed in units of 0.001 nsec. This attribute represents the group delay variation across … |
| 1.3.6.1.4.1.4491.2.1.27.1.2.3.1.7 | ColumndocsPnmCmOfdmChEstCoefMeasStatus | read-only | current | This attribute is used to determine the status of the measurement. The PNM server will query this value to determine when the file is ready for transfer. |
| 1.3.6.1.4.1.4491.2.1.27.1.2.3.1.8 | ColumndocsPnmCmOfdmChEstCoefFileName | read-write | current | This attribute is the name of the file at the CM which is to be transferred to the PNM server. The data is stored as 16 bit integers for the I and Q data. This… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.3.1.9 | ColumndocsPnmCmOfdmChEstCoefAmpMean | read-only | current | This attribute represents the mean, in 0.001 dB, of the magnitude of the equilizer coefficients. |
| 1.3.6.1.4.1.4491.2.1.27.1.2.3.1.10 | ColumndocsPnmCmOfdmChEstCoefGrpDelaySlope | read-only | current | This attribute represents the slope in 0.001 nsec per MHz in the group delay of the equalizer coefficients. This attribute represents the slope across the enti… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.3.1.11 | ColumndocsPnmCmOfdmChEstCoefGrpDelayMean | read-only | current | This attribute represents the mean of the group delay, in units of 0.001 nsec. |
| 1.3.6.1.4.1.4491.2.1.27.1.2.4 | TabledocsPnmCmDsConstDispMeasTable | not-accessible | current | The downstream constellation display provides received QAM constellation points for display. Equalized soft decisions (I and Q) at the slicer input are collect… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.4.1 | RowdocsPnmCmDsConstDispMeasEntry | not-accessible | current | The conceptual row of the docsPnmCmDsConstDispMeasTable. An instance is dynamically created and exists for an associated ifIndex upon which the test defined by… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.4.1.1 | ColumndocsPnmCmDsConstDispTrigEnable | read-write | current | Setting this object to a value of 'true' instructs the CM to begin collection and storing the constellation points into the file specified by the 'docsPnmCmDsC… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.4.1.2 | ColumndocsPnmCmDsConstDispModOrderOffset | read-write | current | This attribute specifies an offset from the lowest order modulation for the data subcarriers in any of the profiles in the downstream channel. If the lowest or… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.4.1.3 | ColumndocsPnmCmDsConstDispNumSampleSymb | read-write | current | This attribute tells the CM how many soft decision samples of OFDM subcarriers with the specified modulation order are captured. This value can only be changed… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.4.1.4 | ColumndocsPnmCmDsConstDispSelModOrder | read-only | current | This object provides the actual Modulation Order that will be used for the Constellation display based on the selected ModulationOrderOffset. |
| 1.3.6.1.4.1.4491.2.1.27.1.2.4.1.5 | ColumndocsPnmCmDsConstDispMeasStatus | read-only | current | This attribute is used to determine the status of the measurement. The PNM server will query this value to determine when the file is ready for transfer. |
| 1.3.6.1.4.1.4491.2.1.27.1.2.4.1.6 | ColumndocsPnmCmDsConstDispFileName | read-write | current | This attribute is the name of the file at the CM which is to be transferred to the PNM server. The data is stored as 16 bit integers for the I and Q data. This… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.5 | TabledocsPnmCmDsOfdmRxMerTable | not-accessible | current | This table provides measurements of the receive modulation error ratio (RxMER) for each subcarrier. Each subcarrier RxMER value consists of one byte which repr… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.5.1 | RowdocsPnmCmDsOfdmRxMerEntry | not-accessible | current | The conceptual row of the docsPnmCmDsOfdmRxMerTable. An instance is dynamically created and exists for an associated ifIndex upon which the test defined by thi… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.5.1.1 | ColumndocsPnmCmDsOfdmRxMerFileEnable | read-write | current | This attribute causes the CM to begin the RxMer measurement for the purpose of creating a file of RxMer data. When the measurement is complete the FileEnable a… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.5.1.2 | ColumndocsPnmCmDsOfdmRxMerPercentile | read-write | current | This attribute specifies the percentile (such as 2nd percentile or 5th percentile) of all active subcarriers in an OFDM channel at which the ThresholdRxMerValu… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.5.1.3 | ColumndocsPnmCmDsOfdmRxMerMean | read-only | current | This attribute is the mean of the dB values of the RxMER measurements of all active subcarriers. The mean is computed directly on the dB values as follows: Mea… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.5.1.4 | ColumndocsPnmCmDsOfdmRxMerStdDev | read-only | current | This attribute is the standard deviation of the dB values of the RxMER measurements of all active subcarriers. The standard deviation is computed directly on t… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.5.1.5 | ColumndocsPnmCmDsOfdmRxMerThrVal | read-only | current | This attribute is the RxMER value corresponding to the specified Percentile value. The CM sorts the subcarriers in ascending order of RxMER, resulting in a pos… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.5.1.6 | ColumndocsPnmCmDsOfdmRxMerThrHighestFreq | read-only | current | This attribute is the frequency in Hz of the highest-frequency subcarrier having RxMER = ThresholdRxMerValue. |
| 1.3.6.1.4.1.4491.2.1.27.1.2.5.1.7 | ColumndocsPnmCmDsOfdmRxMerMeasStatus | read-only | current | This attribute is used to determine the status of the measurement. The PNM server will query this value to determine when the file is ready for transfer. |
| 1.3.6.1.4.1.4491.2.1.27.1.2.5.1.8 | ColumndocsPnmCmDsOfdmRxMerFileName | read-write | current | This attribute is the name of the file at the CM which is to be downloaded by the PNM server. This value can only be changed while a test is not in progress. A… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.6 | TabledocsPnmCmDsOfdmMerMarTable | not-accessible | current | The purpose of this item is to provide an estimate of the MER margin available on the downstream data channel with respect to a modulation profile. The profile… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.6.1 | RowdocsPnmCmDsOfdmMerMarEntry | not-accessible | current | The conceptual row of the docsPnmCmDsOfdmMerMarTable. An instance is dynamically created and exists for an associated ifIndex upon which the test defined by th… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.6.1.1 | ColumndocsPnmCmDsOfdmMerMarProfileId | read-write | current | This attribute represents the Downstream Profile ID of the Profile. The profile may be a profile that the modem has already been assigned or a candidate profil… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.6.1.2 | ColumndocsPnmCmDsOfdmMerMarThrshldOffset | read-write | current | This attribute represents the number of dB below the RequiredDsOfdmQamMer value for a given modulation order that is likely to cause uncorrectable errors. Meas… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.6.1.3 | ColumndocsPnmCmDsOfdmMerMarMeasEnable | read-write | current | This attribute causes the CM to begin the measurement. When the measurement is complete the MeasEnable attribute is set internally to 'false' by the CM. Settin… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.6.1.4 | ColumndocsPnmCmDsOfdmMerMarNumSymPerSubCarToAvg | read-write | current | This attribute represents the number of symbols that will be used in the calculation of the average MER per subcarrier. This value can only be changed while a … |
| 1.3.6.1.4.1.4491.2.1.27.1.2.6.1.5 | ColumndocsPnmCmDsOfdmMerMarReqAvgMer | read-write | current | This attribute represents the minimum required average MER. This value can either be computed by the entity requesting the test or be computed by the test when… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.6.1.6 | ColumndocsPnmCmDsOfdmMerMarNumSubCarBelowThrshld | read-only | current | This object represents the count of the number of subcarriers which were below the docsPnmCmDsOfdmMerMarReqAvgMer for the 'docsPnmCmDsOfdmMerMarThrshldOffset' … |
| 1.3.6.1.4.1.4491.2.1.27.1.2.6.1.7 | ColumndocsPnmCmDsOfdmMerMarMeasuredAvgMer | read-only | current | This attribute is the arithmetic mean of all MER dB values measured over all of the subcarriers in the encompassed spectrum. That is, the average is taken of a… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.6.1.8 | ColumndocsPnmCmDsOfdmMerMarAvgMerMargin | read-only | current | This attribute represents the difference between the 'docsPnmCmDsOfdmMerMarMeasuredAvgMer' and the 'docsPnmCmDsOfdmMerMarReqAvgMer'. |
| 1.3.6.1.4.1.4491.2.1.27.1.2.6.1.9 | ColumndocsPnmCmDsOfdmMerMarMeasStatus | read-only | current | This attribute is used to determine the status of the measurement. The PNM server will query this value to determine when the data is ready for evaluation. |
| 1.3.6.1.4.1.4491.2.1.27.1.2.7 | TabledocsPnmCmDsOfdmFecTable | not-accessible | current | The purpose of the table is to provide a series of codword error rate measurements on a per profle basis over a set period of time. This table will have a row … |
| 1.3.6.1.4.1.4491.2.1.27.1.2.7.1 | RowdocsPnmCmDsOfdmFecEntry | not-accessible | current | The conceptual row of the docsPnmCmDsOfdmFecTable. An instance is dynamically created and exists for an associated ifIndex upon which the test defined by this … |
| 1.3.6.1.4.1.4491.2.1.27.1.2.7.1.1 | ColumndocsPnmCmDsOfdmFecSumType | read-write | current | This attribute is the type of summary test to be performed. If set to 'interval10min(2)', when enabled the CM must perform a test of 10 minutes in duration rec… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.7.1.2 | ColumndocsPnmCmDsOfdmFecFileEnable | read-write | current | When this attribute is set to 'true' the CM must begin the SummaryType codeword error summary test. While the test is in progress, the CM must return a MeasSta… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.7.1.3 | ColumndocsPnmCmDsOfdmFecMeasStatus | read-only | current | This attribute is used to determine the status of the measurement. The PNM server will query this value to determine when the file is ready for transfer. |
| 1.3.6.1.4.1.4491.2.1.27.1.2.7.1.4 | ColumndocsPnmCmDsOfdmFecFileName | read-write | current | This attribute is the name of the file at the CM which is to be transferred to the PNM server. This value can only be changed while a test is not in progress. … |
| 1.3.6.1.4.1.4491.2.1.27.1.2.8 | NodedocsPnmCmDsOfdmReqMERObjects | |||
| 1.3.6.1.4.1.4491.2.1.27.1.2.8.1 | ScalardocsPnmCmDsOfdmReqMerQam16 | read-write | current | This attribute represents the minimum required MER value for this Modulation Order. It is used in determining the SNR Margin for the Candidate Downstream Profi… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.8.2 | ScalardocsPnmCmDsOfdmReqMerQam64 | read-write | current | This attribute represents the minimum required MER value for this Modulation Order. It is used in determining the SNR Margin for the Candidate Downstream Profi… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.8.3 | ScalardocsPnmCmDsOfdmReqMerQam128 | read-write | current | This attribute represents the minimum required MER value for this Modulation Order. It is used in determining the SNR Margin for the Candidate Downstream Profi… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.8.4 | ScalardocsPnmCmDsOfdmReqMerQam256 | read-write | current | This attribute represents the minimum required MER value for this Modulation Order. It is used in determining the SNR Margin for the Candidate Downstream Profi… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.8.5 | ScalardocsPnmCmDsOfdmReqMerQam512 | read-write | current | This attribute represents the minimum required MER value for this Modulation Order. It is used in determining the SNR Margin for the Candidate Downstream Profi… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.8.6 | ScalardocsPnmCmDsOfdmReqMerQam1024 | read-write | current | This attribute represents the minimum required MER value for this Modulation Order. It is used in determining the SNR Margin for the Candidate Downstream Profi… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.8.7 | ScalardocsPnmCmDsOfdmReqMerQam2048 | read-write | current | This attribute represents the minimum required MER value for this Modulation Order. It is used in determining the SNR Margin for the Candidate Downstream Profi… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.8.8 | ScalardocsPnmCmDsOfdmReqMerQam4096 | read-write | current | This attribute represents the minimum required MER value for this Modulation Order. It is used in determining the SNR Margin for the Candidate Downstream Profi… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.8.9 | ScalardocsPnmCmDsOfdmReqMerQam8192 | read-write | current | This attribute represents the minimum required MER value for this Modulation Order. It is used in determining the SNR Margin for the Candidate Downstream Profi… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.8.10 | ScalardocsPnmCmDsOfdmReqMerQam16384 | read-write | current | This attribute represents the minimum required MER value for this Modulation Order. It is used in determining the SNR Margin for the Candidate Downstream Profi… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.9 | TabledocsPnmCmDsHistTable | not-accessible | current | The purpose of the downstream histogram is to provide a measurement of nonlinear effects in the channel such as amplifier compression and laser clipping. For e… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.9.1 | RowdocsPnmCmDsHistEntry | not-accessible | current | The conceptual row of the docsPnmCmDsHistTable. An instance is dynamically created and exists for an associated ifIndex of the RF MAC interface upon which the … |
| 1.3.6.1.4.1.4491.2.1.27.1.2.9.1.1 | ColumndocsPnmCmDsHistEnable | read-write | current | Setting this object to a value of 'true' instructs the CM to begin collection of histogram data and when enabled, the CM continues producing new data at its ow… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.9.1.2 | ColumndocsPnmCmDsHistTimeOut | read-write | current | This object sets a seconds time-out timer for capturing histogram data. This attribute is used to automatically clear the Enable attribute when the timeout exp… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.9.1.3 | ColumndocsPnmCmDsHistMeasStatus | read-only | current | This attribute is used to determine the status of the measurement. The PNM server will query this value to determine when the file is ready for transfer. |
| 1.3.6.1.4.1.4491.2.1.27.1.2.9.1.4 | ColumndocsPnmCmDsHistFileName | read-write | current | This object is the name of the file at the CM which is to be transferred to the PNM server. The data is stored as 32 bit integers for the hit and dwell count v… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.10 | TabledocsPnmCmUsPreEqTable | not-accessible | current | This object provides access to CM upstream pre-equalizer coefficients. The CM pre-equalizer coefficients and the CMTS upstream adaptive equalizer coefficient u… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.10.1 | RowdocsPnmCmUsPreEqEntry | not-accessible | current | The conceptual row of the docsPnmCmUsPreEqTable. An instance is dynamically created and exists for an associated ifIndex upon which the test defined by this ta… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.10.1.1 | ColumndocsPnmCmUsPreEqFileEnable | read-write | current | This object causes the files defined by the 'docsPnmCmUsPreEqFileName' and the 'docsPnmCmUsPreEqlastUpdateFileName' objects to be created. The files, once crea… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.10.1.2 | ColumndocsPnmCmUsPreEqAmpRipplePkToPk | read-only | current | This attribute represents the value of the peak to peak ripple in the magnitude of the equalizer coefficients. This attribute represents the ripple across the … |
| 1.3.6.1.4.1.4491.2.1.27.1.2.10.1.3 | ColumndocsPnmCmUsPreEqAmpRippleRms | read-only | current | This attribute represents the value of the RMS ripple in the magnitude of the equalizer coefficients. This attribute represents the ripple across the entire OF… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.10.1.4 | ColumndocsPnmCmUsPreEqAmpSlope | read-only | current | This attribute represents the slope in 0.001 dB per MHz in the magnitude of the equalizer coefficients. This attribute represents the slope across the entire O… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.10.1.5 | ColumndocsPnmCmUsPreEqGrpDelayRipplePkToPk | read-only | current | This attribute represents the peak-to-peak Group Delay Ripple expressed in units of 0.001 nsec. This attribute represents the group delay variation across the … |
| 1.3.6.1.4.1.4491.2.1.27.1.2.10.1.6 | ColumndocsPnmCmUsPreEqGrpDelayRippleRms | read-only | current | This attribute represents the RMS value of the Group Delay Ripple expressed in units of 0.001 nsec. This attribute represents the group delay variation across … |
| 1.3.6.1.4.1.4491.2.1.27.1.2.10.1.7 | ColumndocsPnmCmUsPreEqPreEqCoAdjStatus | read-only | current | This object represents whether the last set of Pre-Equalization coefficient adjustments that were fully applied or were only partially applied due to excessive… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.10.1.8 | ColumndocsPnmCmUsPreEqMeasStatus | read-only | current | This attribute is used to determine the status of the measurement. The PNM server will query this value to determine when the file is ready for transfer. Summa… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.10.1.9 | ColumndocsPnmCmUsPreEqLastUpdateFileName | read-write | current | This attribute is the name of the file at the CM which is to be transferred to the PNM server. The data represents the values sent to the CM by the CMTS in the… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.10.1.10 | ColumndocsPnmCmUsPreEqFileName | read-write | current | This attribute is the name of the file at the CM which is to be transferred to the PNM server. The data represents the current value of the Pre-Equalization va… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.10.1.11 | ColumndocsPnmCmUsPreEqAmpMean | read-only | current | This attribute represents the mean in 0.001 dB, of the magnitude of the equalizer coefficients. Note: An algorithm for calculating the ripple and slope for the… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.10.1.12 | ColumndocsPnmCmUsPreEqGrpDelaySlope | read-only | current | This attribute represents the slope in 0.001 nsec per MHz in the group delay of the equalizer coefficients. This attribute represents the slope across the enti… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.10.1.13 | ColumndocsPnmCmUsPreEqGrpDelayMean | read-only | current | This attribute represents the mean of the group delay in units of 0.001 nsec. |
| 1.3.6.1.4.1.4491.2.1.27.1.2.11 | TabledocsPnmCmDsOfdmModProfTable | not-accessible | current | The purpose of the table is to provide the per subcarrier bit load of the modulation profiles. This table will have a row for each ifIndex for the modem. |
| 1.3.6.1.4.1.4491.2.1.27.1.2.11.1 | RowdocsPnmCmDsOfdmModProfEntry | not-accessible | current | The conceptual row of the docsPnmCmDsOfdmModProfTable. An instance is dynamically created and exists for an associated ifIndex upon which the test defined by t… |
| 1.3.6.1.4.1.4491.2.1.27.1.2.11.1.1 | ColumndocsPnmCmDsOfdmModProfFileEnable | read-write | current | When this attribute is set to 'true' the CM must begin the Modulation Profile Summary report. While the report is in progress, the CM must return a MeasStatus … |
| 1.3.6.1.4.1.4491.2.1.27.1.2.11.1.2 | ColumndocsPnmCmDsOfdmModProfMeasStatus | read-only | current | This attribute is used to determine the status of the measurement. The PNM server will query this value to determine when the file is ready for transfer. |
| 1.3.6.1.4.1.4491.2.1.27.1.2.11.1.3 | ColumndocsPnmCmDsOfdmModProfFileName | read-write | current | This attribute is the name of the file at the CM which is to be transferred to the PNM server. This value can only be changed while a test is not in progress. … |
| 1.3.6.1.4.1.4491.2.1.27.1.3 | NodedocsPnmCmtsObjects | |||
| 1.3.6.1.4.1.4491.2.1.27.1.3.1 | TabledocsPnmCmtsDsOfdmSymCapTable | not-accessible | current | Downstream OFDM Symbol Capture is a PNM Test described in [PHYv3.1] Downstream Symbol Capture section. The CmtsDsOfdmSymCapTable defines the management interfa… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.1.1 | RowdocsPnmCmtsDsOfdmSymCapEntry | not-accessible | current | The conceptual row of the 'docsPnmCmtsDsOfdmSymCapTable'. An instance is dynamically created and exists for an associated ifIndex of the physical downstream ch… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.1.1.1 | ColumndocsPnmCmtsDsOfdmSymTrigEnable | read-write | current | Setting this object to a value of 'true' instructs the CMTS to insert a Trigger Message Block in the PLC with a Group ID matching the CM's TriggerGroupID. The … |
| 1.3.6.1.4.1.4491.2.1.27.1.3.1.1.2 | ColumndocsPnmCmtsDsOfdmSymTrigGroupId | read-write | current | This attribute is used by the CMTS to be inserted in the PLC Trigger Message Block to identify a CM or a group of CMs expected to perform Symbol Capture measur… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.1.1.3 | ColumndocsPnmCmtsDsOfdmSymFirstActSubCarIdx | read-only | current | This object is used to denote the subcarrier index of the lowest frequency of the Encompassed Spectrum for the OFDM channel. |
| 1.3.6.1.4.1.4491.2.1.27.1.3.1.1.4 | ColumndocsPnmCmtsDsOfdmSymLastActSubCarIdx | read-only | current | This object is used to denote the subcarrier index of the highest frequency of the Encompassed Spectrum for the OFDM channel. |
| 1.3.6.1.4.1.4491.2.1.27.1.3.1.1.5 | ColumndocsPnmCmtsDsOfdmSymRxWindowing | read-only | current | This attribute is a flag indicating if vendor proprietary windowing was enabled during the capture. |
| 1.3.6.1.4.1.4491.2.1.27.1.3.1.1.6 | ColumndocsPnmCmtsDsOfdmSymTransactionId | read-only | current | This attribute is the Transaction ID sent by the CMTS in the Trigger Message Block. Prior to completion of a measurement this attribute has no meaning. |
| 1.3.6.1.4.1.4491.2.1.27.1.3.1.1.7 | ColumndocsPnmCmtsDsOfdmSymSampleRate | read-only | current | This attribute is the FFT sample rate in use by the CM for the channel; typically the sample rate for the downstream channel will be 204.8MHz. |
| 1.3.6.1.4.1.4491.2.1.27.1.3.1.1.8 | ColumndocsPnmCmtsDsOfdmSymFftLength | read-only | current | This attribute is the FFT length in use by the CM for the channel; typically this value is 4096 or 8192 for the Downstream Channel. |
| 1.3.6.1.4.1.4491.2.1.27.1.3.1.1.9 | ColumndocsPnmCmtsDsOfdmSymMeasStatus | read-only | current | This attribute is used to determine the status of the measurement. The PNM server will query this value to determine when the measurement is complete. |
| 1.3.6.1.4.1.4491.2.1.27.1.3.1.1.10 | ColumndocsPnmCmtsDsOfdmSymCaptFileName | read-write | current | This attribute is the name of the file with the captured symbol data at the CMTS that is to be downloaded using TFTP by the PNM server. This value can only be … |
| 1.3.6.1.4.1.4491.2.1.27.1.3.1.1.11 | ColumndocsPnmCmtsDsOfdmSymDestinationIndex | read-write | current | This attribute allows the operator to optionally define a destination for the result file or files to be sent when they are available. If this attribute is lef… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.2 | TabledocsPnmCmtsDsOfdmNoisePwrRatioTable | not-accessible | current | Downstream OFDM Noise Power Ratio is a PNM Test described in [PHYv3.1] Downstream Noise Power Ratio (NPR) Measurement section. The CmtsDsOfdmNoisePwrRatioTable… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.2.1 | RowdocsPnmCmtsDsOfdmNoisePwrRatioEntry | not-accessible | current | The conceptual row of the 'docsPnmCmtsDsOfdmNoisePwrRatioTable'. An instance is dynamically created and exists for an associated ifIndex of the physical downst… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.2.1.1 | ColumndocsPnmCmtsDsOfdmNprStartSubcar | read-write | current | This attribute is the Subcarrier index corresponding to the frequency at the start of the spectral notch. This value can only be changed while the value of 'do… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.2.1.2 | ColumndocsPnmCmtsDsOfdmNprStopSubcar | read-write | current | This object is the Subcarrier index corresponding to the frequency at the upper end of the spectral notch. This value can only be changed while the value of 'd… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.2.1.3 | ColumndocsPnmCmtsDsOfdmNprEnable | read-write | current | This attribute is used to enable the CCAP to create the spectral notch. The CCAP may require the interface to have an ifAdminStatus of 'down' before allowing t… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.2.1.4 | ColumndocsPnmCmtsDsOfdmNprDuration | read-write | current | This object indicates the length of time in seconds that the spectral notch is to be maintained. The CMTS may make the excluded subcarriers active after the ex… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.3 | TabledocsPnmCmtsUsOfdmaAQProbeTable | not-accessible | current | Upstream OFDMA Active and Quiet Probe is a PNM Test described in [PHYv3.1] Upstream Capture for Active and Quiet Probe section. The CmtsUsOfdmaAQProbeTable def… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.3.1 | RowdocsPnmCmtsUsOfdmaAQProbeEntry | not-accessible | current | The conceptual row of the 'docsPnmCmtsUsOfdmaAQProbeTable'. An instance is dynamically created and exists for an associated ifIndex of the physical upstream ch… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.3.1.1 | ColumndocsPnmCmtsUsOfdmaAQProbeCmMacAddr | read-write | current | This attribute represents the MAC address of the CM transmitting the probe to be measured. This object cannot be changed while a capture is in progress. It wil… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.3.1.2 | ColumndocsPnmCmtsUsOfdmaAQProbeUseIdleSid | read-write | current | This attribute, when enabled, causes the CMTS to measure the channel during a quiet period when no CM is transmitting. This object cannot be changed while a ca… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.3.1.3 | ColumndocsPnmCmtsUsOfdmaAQProbePreEqOn | read-write | current | This attribute, when enabled, causes the CMTS to enable pre-equalization in the Probe Information Element for the CM transmitting the probe to be measured. Thi… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.3.1.4 | ColumndocsPnmCmtsUsOfdmaAQProbeEnable | read-write | current | When set to true, this attribute causes the CCAP to begin a test of a probe for the CM whose MAC address is specified in the CmMacAddress attribute or for a qu… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.3.1.5 | ColumndocsPnmCmtsUsOfdmaAQProbeTimeout | read-write | current | This attribute provides a timeout for the measurement if the CMTS is unable to perform the measurement for some reason. A value of zero for the Timeout attribu… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.3.1.6 | ColumndocsPnmCmtsUsOfdmaAQProbeNumSymToCapt | read-write | current | This object represents the number of symbols the CMTS is to capture for the modem whose probe is being measured or the number of symbol times to measure for th… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.3.1.7 | ColumndocsPnmCmtsUsOfdmaAQProbeMaxCaptSymbols | read-only | current | This attribute represents the number of symbols the CCAP can capture for one measurement and is reported based on the channel's configuration. Typically, for 5… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.3.1.8 | ColumndocsPnmCmtsUsOfdmaAQProbeNumSamples | read-only | current | For FrequencyDomainSamples set to True, this attribute represents the number of FFT samples present in the probe capture data. This corresponds to the Encompas… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.3.1.9 | ColumndocsPnmCmtsUsOfdmaAQProbeTimeStamp | read-only | current | This object represents the timestamp corresponding to the time when the measurement was performed. In the case in which the Primary Downstream is an OFDM chann… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.3.1.10 | ColumndocsPnmCmtsUsOfdmaAQProbeMeasStatus | read-only | current | This attribute is used to determine the status of the measurement. When the Status = 'SampleReady', the CCAP has completed the measurement and the Enable attri… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.3.1.11 | ColumndocsPnmCmtsUsOfdmaAQProbeFileName | read-write | current | This attribute is the name of the file, with the captured probe data, at the CMTS that is to be downloaded using TFTP to the PNM server. This value can only be… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.3.1.12 | ColumndocsPnmCmtsUsOfdmaAQProbeFreqDomainSamples | read-write | current | This attribute configures the collection of output samples in the time domain or the frequency domain. 'True' means the values are in the frequency domain. 'Fa… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.3.1.13 | ColumndocsPnmCmtsUsOfdmaAQProbeDestinationIndex | read-write | current | This attribute allows the operator to optionally define a destination for the result file or files to be sent when they are available. If this attribute is lef… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.4 | TabledocsPnmCmtsUsImpNoiseTable | not-accessible | current | Upstream Impulse Noise is a PNM Test described in [PHYv3.1] Upstream Impulse Noise Statistics section. Additional information is available in PNM Current Metho… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.4.1 | RowdocsPnmCmtsUsImpNoiseEntry | not-accessible | current | The conceptual row of the docsPnmCmtsUsImpNoiseTable. An instance is dynamically created and exists for an associated ifIndex of the physical upstream channel … |
| 1.3.6.1.4.1.4491.2.1.27.1.3.4.1.1 | ColumndocsPnmCmtsUsImpNoiseEnable | read-write | current | This attribute causes the CCAP to begin the collection of the configured Impulse Noise events. If the FreeRunDuration is set to a value greater than zero, the … |
| 1.3.6.1.4.1.4491.2.1.27.1.3.4.1.2 | ColumndocsPnmCmtsUsImpNoiseFreeRunDuration | read-write | current | This attribute, when configured with a nonzero value, provides length of time to perform the Upstream Impulse Noise measurement when the Enable attribute is se… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.4.1.3 | ColumndocsPnmCmtsUsImpNoiseStTrigLvl | read-write | current | This attribute, when configured with a nonzero value, is the burst noise threshold which, when exceeded after the Enable attribute is set to true and FreeRunDu… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.4.1.4 | ColumndocsPnmCmtsUsImpNoiseEndTrigLvl | read-write | current | This attribute, when configured with a nonzero value, is the lower burst noise threshold for the Upstream Impulse Noise measurement which terminates the measur… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.4.1.5 | ColumndocsPnmCmtsUsImpNoiseCenterFrq | read-write | current | This attribute defines the center frequency for the noise power measurement. This object cannot be changed while a capture is in progress. It will return a val… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.4.1.6 | ColumndocsPnmCmtsUsImpNoiseMeasBw | read-write | current | This attribute defines the bandwidth for the noise power measurement. The MeasurementBw is the -3 dB bandwidth; the occupied bandwidth is typically 1.25 times … |
| 1.3.6.1.4.1.4491.2.1.27.1.3.4.1.7 | ColumndocsPnmCmtsUsImpNoiseNumEvtsCnted | read-only | current | This attribute is used to indicate how many impulse noise events have been recorded since the enable was set to true. This value will be 1024 in steady state, … |
| 1.3.6.1.4.1.4491.2.1.27.1.3.4.1.8 | ColumndocsPnmCmtsUsImpNoiseLastEvtTimeStamp | read-only | current | This attribute provides represents the timestamp corresponding to the start of the last recorded event. The measurement is time-stamped using the 64-bit extend… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.4.1.9 | ColumndocsPnmCmtsUsImpNoiseLastEvtDuration | read-only | current | This attribute provides represents the time corresponding to the duration of the last recorded event. The EventDuration is expressed in ns. |
| 1.3.6.1.4.1.4491.2.1.27.1.3.4.1.10 | ColumndocsPnmCmtsUsImpNoiseLastEvtAvgPwr | read-only | current | This attribute represents the average power measured during the last recorded event. The LastEventAveragePower is expressed in units of dBmV with 32-bit fixed … |
| 1.3.6.1.4.1.4491.2.1.27.1.3.4.1.11 | ColumndocsPnmCmtsUsImpNoiseMeasStatus | read-only | current | This attribute is used to determine the status of the command. When the Status is sampleReady, the CCAP has completed the measurement and the Enable attribute … |
| 1.3.6.1.4.1.4491.2.1.27.1.3.4.1.12 | ColumndocsPnmCmtsUsImpNoiseFileName | read-write | current | This attribute is the name of the file with the captured impulse noise data at the CMTS that is to be downloaded using TFTP to the PNM server. This value can o… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.4.1.13 | ColumndocsPnmCmtsUsImpNoiseDestinationIndex | read-write | current | This attribute allows the operator to optionally define a destination for the result file or files to be sent when they are available. If this attribute is lef… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.5 | TabledocsPnmCmtsUsHistTable | not-accessible | current | Upstream Histogram is a PNM Test described in [PHYv3.1] Upstream Histogram section. The CmtsUsHistTable defines the management interface for the operator to co… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.5.1 | RowdocsPnmCmtsUsHistEntry | not-accessible | current | The conceptual row of the docsPnmCmtsUsHistTable. An instance is dynamically created and exists for an associated ifIndex of an upstream RF port upon which the… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.5.1.1 | ColumndocsPnmCmtsUsHistEnable | read-write | current | Setting this object to a value of 'true' instructs the CCAP to begin collection of histogram data and when enabled, the CCAP continues producing new data at it… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.5.1.2 | ColumndocsPnmCmtsUsHistTimeOut | read-write | current | This column in the table sets a seconds time-out timer for capturing histogram data. It is used to automatically clear the CmtsUsHistEnable when the timeout ex… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.5.1.3 | ColumndocsPnmCmtsUsHistMeasStatus | read-only | current | This attribute is used to determine the status of the command. When the Status is 'sampleReady', the CCAP is ready for the Histogram data to be read. |
| 1.3.6.1.4.1.4491.2.1.27.1.3.5.1.4 | ColumndocsPnmCmtsUsHistFileName | read-write | current | This attribute is the name of the file at the CCAP which is to be transferred to the PNM server. The data is stored as 32 bit integers for the hit and dwell co… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.5.1.5 | ColumndocsPnmCmtsUsHistDestinationIndex | read-write | current | This attribute allows the operator to optionally define a destination for the result file or files to be sent when they are available. If this attribute is lef… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.6 | TabledocsPnmCmtsUsOfdmaRxPwrTable | not-accessible | current | Upstream OFDMA Receive Power is a PNM Test described in [PHYv3.1] Upstream Channel Power section. The CmtsUsOfdmaRxPwrTable defines the management interface fo… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.6.1 | RowdocsPnmCmtsUsOfdmaRxPwrEntry | not-accessible | current | The conceptual row of the docsPnmCmtsUsOfdmaRxPwrTable. An instance is dynamically created and exists for an associated ifIndex upon which the test defined by … |
| 1.3.6.1.4.1.4491.2.1.27.1.3.6.1.1 | ColumndocsPnmCmtsUsOfdmaRxPwrEnable | read-write | current | When set to true, this attribute causes the CCAP to begin a test of the received upstream channel power for the CM whose MAC address was specified in the CmMac… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.6.1.2 | ColumndocsPnmCmtsUsOfdmaRxPwrCmMac | not-accessible | current | This attribute represents the MAC address of the CM whose Received upstream channel power is being measured. This object cannot be changed while a capture is i… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.6.1.3 | ColumndocsPnmCmtsUsOfdmaRxPwrPreEq | read-write | current | This attribute is used by the CMTS to enable or disable pre-equalization of the probe. The pre-equalization is controlled by a bit in the Probe Information Ele… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.6.1.4 | ColumndocsPnmCmtsUsOfdmaRxPwrNumAvgs | read-write | current | This column configures the number of measurements over which the CCAP averages Upstream OFDMA Receive Power. The average is simply the sum of the CmtsUsOfdmaRx… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.6.1.5 | ColumndocsPnmCmtsUsOfdmaRxPwrOnePtSixPsd | read-only | current | This attribute represents the average power of the probe measured by the CCAP, reported as the Power Spectral Density in an equivalent 1.6 MHz spectrum, for th… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.6.1.6 | ColumndocsPnmCmtsUsOfdmaRxPwrMeasStatus | read-only | current | This attribute is used to determine the status of the measurement. When the Status = SampleReady, the CCAP is ready for the Upstream Power data to be read. |
| 1.3.6.1.4.1.4491.2.1.27.1.3.7 | TabledocsPnmCmtsUsOfdmaRxMerTable | not-accessible | current | Upstream OFDMA Receive MER per Subcarrier is a PNM Test described in [PHYv3.1] Upstream Receive Modulation Error Ratio (RxMER) Per Subcarrier section. The Cmts… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.7.1 | RowdocsPnmCmtsUsOfdmaRxMerEntry | not-accessible | current | The conceptual row of the docsPnmCmtsUsOfdmaRxMerTable. An instance is dynamically created and exists for an associated ifIndex upon which the test defined by … |
| 1.3.6.1.4.1.4491.2.1.27.1.3.7.1.1 | ColumndocsPnmCmtsUsOfdmaRxMerEnable | read-write | current | When set to true, this attribute causes the CCAP to begin a test of the received MER per subcarrier for the CM whose MAC address was specified in the CmMac att… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.7.1.2 | ColumndocsPnmCmtsUsOfdmaRxMerCmMac | read-write | current | This attribute represents the MAC address of the CM whose Rx MER is being measured. This object cannot be changed while a capture is in progress. It will retur… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.7.1.3 | ColumndocsPnmCmtsUsOfdmaRxMerPreEq | read-write | current | This attribute is used by the CMTS to enable or disable Pre Equalization of the probe. The Pre Equalization is controlled by a bit in the Probe Information Ele… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.7.1.4 | ColumndocsPnmCmtsUsOfdmaRxMerNumAvgs | read-write | current | This attribute controls the number of probes the CCAP will use to calculate the Rx MER per subcarrier. The average will be computed using the 'leaky integrator… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.7.1.5 | ColumndocsPnmCmtsUsOfdmaRxMerMeasStatus | read-only | current | This attribute is used to determine the status of the measurement. When the MeasStatus = SampleReady, the CMTS is ready for the RxMER data to be read. |
| 1.3.6.1.4.1.4491.2.1.27.1.3.7.1.6 | ColumndocsPnmCmtsUsOfdmaRxMerFileName | read-write | current | This attribute is the name of the file with the RxMER data for a specified CM at the CMTS that is to be downloaded using TFTP to the PNM server. This value can… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.7.1.7 | ColumndocsPnmCmtsUsOfdmaRxMerDestinationIndex | read-write | current | This attribute allows the operator to optionally define a destination for the result file or files to be sent when they are available. If this attribute is lef… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.8 | TabledocsPnmCmtsUsSpecAnTable | not-accessible | deprecated | The upstream triggered spectrum analysis measurement provides a wideband spectrum analyzer function in the CMTS which can be triggered to examine desired upstr… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.8.1 | RowdocsPnmCmtsUsSpecAnEntry | not-accessible | deprecated | The conceptual row of the docsPnmCmtsUsSpecAnTable. An instance is dynamically created and exists for an associated ifIndex of an OFDMA upstream RF Port upon w… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.8.1.1 | ColumndocsPnmCmtsUsSpecAnEnable | read-write | deprecated | This attribute causes the CMTS to begin the measurement of a probe for the selected CM or for a quiet period if the UseIdleSid attribute is enabled. The Enable… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.8.1.2 | ColumndocsPnmCmtsUsSpecAnTrigMode | read-write | deprecated | This attribute is used to control the trigger mode for the Spectrum Analysis capture. This object cannot be changed while a capture is in progress. It will ret… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.8.1.3 | ColumndocsPnmCmtsUsSpecAnMiniSlotCnt | read-write | deprecated | This attribute controls the numbe rof minislots the CMTS capturs during the Spectrum Analysis capture. This object cannot be changed while a capture is in prog… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.8.1.4 | ColumndocsPnmCmtsUsSpecAnSid | read-write | deprecated | This attribute is the SID corresponding to the CM which is granted a burst opportunity for the purpose of Spectrum Analysis. Typically the CMTS will schedule a… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.8.1.5 | ColumndocsPnmCmtsUsSpecAnMiniSlotNum | read-write | deprecated | This attribute provides a mechanism by which the CMTS can begin the Spectrum Analysis at a subcarrier frequency corresponding to the MiniSlotNumber. This attri… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.8.1.6 | ColumndocsPnmCmtsUsSpecAnCmMac | read-write | deprecated | This attribute is used by the CCAP to trigger on a grant for any SID assigned to the CM and to perform the Spectrum Analysis Capture when the burst correspondi… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.8.1.7 | ColumndocsPnmCmtsUsSpecAnCenterFreq | read-write | deprecated | This attribute determines the center frequency of the Spectrum Analysis capture if the trigger mode is FreeRunning. If the trigger mode is not FreeRunning, the… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.8.1.8 | ColumndocsPnmCmtsUsSpecAnSpan | read-write | deprecated | This attribute determines the frequency span of the Spectrum Analysis capture if the trigger mode is FreeRunning. If the trigger mode is not FreeRunning, the C… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.8.1.9 | ColumndocsPnmCmtsUsSpecAnNumberOfBins | read-write | deprecated | This attribute determines the number of bins for the Spectrum Analysis capture if the trigger mode is FreeRunning. If the trigger mode is not FreeRunning, the … |
| 1.3.6.1.4.1.4491.2.1.27.1.3.8.1.10 | ColumndocsPnmCmtsUsSpecAnMeasStatus | read-only | deprecated | This attribute is used to determine the status of the measurement. The PNM server will query this value to determine when the file is ready for transfer. |
| 1.3.6.1.4.1.4491.2.1.27.1.3.8.1.11 | ColumndocsPnmCmtsUsSpecAnFileName | read-write | deprecated | This attribute is the name of the file with the Spectrum Analysis data at the CMTS that is to be downloaded using TFTP to the PNM server. This value can only b… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.9 | NodedocsPnmCmtsOptObjects | |||
| 1.3.6.1.4.1.4491.2.1.27.1.3.9.1 | TabledocsPnmCmtsOptReqTable | not-accessible | current | This table is used to initiate the OPT-REQ message for a given OFDM DS channel. The message and resulting tests and requirements are defined in the OPT-REQ TLV… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.9.1.1 | RowdocsPnmCmtsOptReqEntry | not-accessible | current | The conceptual row of the docsPnmCmtsOptReqTable. The conceptual rows do not persist across device resets. |
| 1.3.6.1.4.1.4491.2.1.27.1.3.9.1.1.1 | ColumndocsPnmCmtsOptReqCmMacAddr | not-accessible | current | This attribute is a key which represents the MAC address for the referenced CM. |
| 1.3.6.1.4.1.4491.2.1.27.1.3.9.1.1.2 | ColumndocsPnmCmtsOptReqDsOfdmChanCfgIndex | not-accessible | current | This key is the ifIndex of a Downstream OFDM channel assigned to the modem. |
| 1.3.6.1.4.1.4491.2.1.27.1.3.9.1.1.3 | ColumndocsPnmCmtsOptReqDsOfdmProfCfgId | not-accessible | current | This attribute is a key that is the targeted profile being tested with OPT for the instance of DsOfdmProfileCfg. For Data Profile testing the ID of the profile… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.9.1.1.4 | ColumndocsPnmCmtsOptReqOpCode | read-create | current | This attribute controls the testing to be performed by the CM receiving the OPT-REQ message. Defined values are listed below: other(1) - OPT-REQ OpCode type ot… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.9.1.1.5 | ColumndocsPnmCmtsOptReqProfileTest | read-create | current | This attribute defines which of the OPT tests are to be run by the CM. The tests are encoded as individual bits: rxMerSubCarrierStats(0) RxMER Statistics per S… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.9.1.1.6 | ColumndocsPnmCmtsOptReqMaxDuration | read-create | current | This attribute allows the tester to determine how long a test may run before returning results or aborting. MULPI requires this value to be not greater than 3 … |
| 1.3.6.1.4.1.4491.2.1.27.1.3.9.1.1.7 | ColumndocsPnmCmtsOptReqMaxCodewords | read-create | current | This attribute defines the maximum number of codewords that the CM should examine before the test is complete. When either Nc or more codewords have been recei… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.9.1.1.8 | ColumndocsPnmCmtsOptReqMaxUncorrectableCws | read-create | current | This attribute defines the max num of uncorrectable codewords the CM should examine before the test is complete. When either Nc or more codewords have been rec… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.9.1.1.9 | ColumndocsPnmCmtsOptReqCwTaggingEnabled | read-create | current | This attribute indicates whether Codeword Tagging is in use for this test. This attribute is defined as a Boolean with the value 'false' meaning that codeword … |
| 1.3.6.1.4.1.4491.2.1.27.1.3.9.1.1.10 | ColumndocsPnmCmtsOptReqNcpFields | read-create | current | This attribute defines the maximum number of NCP fields to be examined during the test. When the CM has examined this number or more NCP fields, it returns the… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.9.1.1.11 | ColumndocsPnmCmtsOptReqMaxNcpCrcFails | read-create | current | This attribute defines the maximum number of NCP fields that are allowed to fail the NCP CRC checks to be examined during the test. When the CM has examined th… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.9.1.1.12 | ColumndocsPnmCmtsOptReqStatus | read-create | current | The row status of this instance. |
| 1.3.6.1.4.1.4491.2.1.27.1.3.9.1.1.13 | ColumndocsPnmCmtsOptReqMerThreshTemplateIndex | read-create | current | This attribute defines the TemplateIndex of the OptMerThresholdTemplate objects for tests requiring MER thresholds. Zero means no template is assigned for the … |
| 1.3.6.1.4.1.4491.2.1.27.1.3.9.2 | TabledocsPnmCmtsOptMerThreshCfgTable | not-accessible | deprecated | This table is used to configure parameters for RxMER tests defined in docsPnmCmtsOptReqTable that require Pass/Fail criteria. It is necessary to define the par… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.9.2.1 | RowdocsPnmCmtsOptMerThreshCfgEntry | not-accessible | deprecated | The conceptual row of the docsPnmCmtsOptMerThreshCfgTable. The conceptual rows do not persist across device resets. |
| 1.3.6.1.4.1.4491.2.1.27.1.3.9.2.1.1 | ColumndocsPnmCmtsOptMerThreshCfgModOrder | not-accessible | deprecated | This attribute is a key which represents the modulation types supported by the CCAP modulator. The value of zeroBitLoaded means that the subcarrier is BPSK mod… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.9.2.1.2 | ColumndocsPnmCmtsOptMerThreshCfgRxMerVsBitloadingTarget | read-create | deprecated | This attribute is the required value for the profile RxMER (refer to OPT-RSP) in units of 0.25dB (0xFF is 63.75dB). This is the required RxMER value that the C… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.9.2.1.3 | ColumndocsPnmCmtsOptMerThreshCfgRxMerMargin | read-create | deprecated | The CM reports the number of subcarriers with a measured RxMER value that is at least this value below the target RxMER for the bitloading of the given subcarr… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.9.2.1.4 | ColumndocsPnmCmtsOptMerThreshCfgStatus | read-create | deprecated | The status of this instance. |
| 1.3.6.1.4.1.4491.2.1.27.1.3.9.3 | TabledocsPnmCmtsOptProfChgCfgTable | not-accessible | current | This table allows the Operator to force changes in the assigned profiles on a given registered CM. The intent of this object is to replace the current set of D… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.9.3.1 | RowdocsPnmCmtsOptProfChgCfgEntry | not-accessible | current | The conceptual row of the docsPnmCmtsOptProfChgCfgTable. The conceptual rows do not persist across device resets. |
| 1.3.6.1.4.1.4491.2.1.27.1.3.9.3.1.1 | ColumndocsPnmCmtsOptProfChgCfgIfIndex | not-accessible | current | This attribute is the ifIndex of the DS OFDM channel that the CMTS will instruct the CM to adjust it's profiles for. |
| 1.3.6.1.4.1.4491.2.1.27.1.3.9.3.1.2 | ColumndocsPnmCmtsOptProfChgCfgDsProfList | read-create | current | This attribute is a list of N 1-byte downstream OFDM profile IDs assigned for the OFDM channel. |
| 1.3.6.1.4.1.4491.2.1.27.1.3.9.3.1.3 | ColumndocsPnmCmtsOptProfChgCfgStatus | read-create | current | The row status of this instance. |
| 1.3.6.1.4.1.4491.2.1.27.1.3.9.4 | TabledocsPnmCmtsOptRespTable | not-accessible | current | This table is used to read the OPT-RSP message for a given OFDM DS channel. One of the main issues for the modeling for OPT-RSP is that all OPT responses will … |
| 1.3.6.1.4.1.4491.2.1.27.1.3.9.4.1 | RowdocsPnmCmtsOptRespEntry | not-accessible | current | The conceptual row of the docsPnmCmtsOptRespTable. The conceptual rows do not persist across device resets. |
| 1.3.6.1.4.1.4491.2.1.27.1.3.9.4.1.1 | ColumndocsPnmCmtsOptRespStatus | read-only | current | This attribute allows the CCAP to return the status of a specific OPT test request. The value of this attribute is found in the status portion of the OPT-RSP h… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.9.4.1.2 | ColumndocsPnmCmtsOptRespFirstActiveSubcarrierNum | read-only | current | This attribute is the subcarrier index of the lowest subcarrier in the Occupied Bandwidth of the channel. |
| 1.3.6.1.4.1.4491.2.1.27.1.3.9.4.1.3 | ColumndocsPnmCmtsOptRespMerData | read-only | current | This attribute contains the MER data for the active subcarriers in the instance of the DsOfdmChannelCfg object. The data represents Integer modulation error ra… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.9.4.1.4 | ColumndocsPnmCmtsOptRespMerPassFailData | read-only | current | This attribute contains a Pass/Fail indication for each subcarrier's RxMER (1 bit for each subcarrier). A value of 1 indicates that the measured MER is greater… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.9.4.1.5 | ColumndocsPnmCmtsOptRespNumSubcarriersBelowThresh | read-only | current | This attribute indicates the number of subcarriers (less then or equal to 7680) whose RxMER is greater then or equal to the RxMER Margin below the RxMER target… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.9.4.1.6 | ColumndocsPnmCmtsOptRespSnrMarginData | read-only | current | This attribute indicates the SNR margin of the candidate data profile (signed integer), in units of 0.25dB, calculation is as defined in the PHY4.0 Spec. |
| 1.3.6.1.4.1.4491.2.1.27.1.3.9.4.1.7 | ColumndocsPnmCmtsOptRespCodewordCt | read-only | current | This attribute is a count of the measured number of codewords that the CM has successfully received during the testing interval for the profile being tested. U… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.9.4.1.8 | ColumndocsPnmCmtsOptRespCorrectedCodewordCt | read-only | current | This attribute is a count of the measured number of codewords that the CM has successfully received and was able to correct during the testing interval for the… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.9.4.1.9 | ColumndocsPnmCmtsOptRespUncorrectableCodewordCt | read-only | current | This attribute is a count of the measured num of uncorrectable codewords that the CM has received during the testing interval for the profile being tested. Uns… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.9.4.1.10 | ColumndocsPnmCmtsOptRespNcpFieldCt | read-only | current | This attribute records the number of NCP fields that were examined by the CM during the test interval. |
| 1.3.6.1.4.1.4491.2.1.27.1.3.9.4.1.11 | ColumndocsPnmCmtsOptRespNcpCrcFailCt | read-only | current | This attribute records the number of NCP fields that failed the NCP CRC check. |
| 1.3.6.1.4.1.4491.2.1.27.1.3.9.5 | TabledocsPnmCmtsOptMerThreshTemplateTable | not-accessible | current | For MER tests that require Pass or Fail criteria, it is necessary to define the parameters in a separate fashion as the OPT-REQ message needs these values on a… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.9.5.1 | RowdocsPnmCmtsOptMerThreshTemplateEntry | not-accessible | current | The conceptual row of the docsPnmCmtsOptMerThreshTemplateTable. The conceptual rows do not persist across device resets. |
| 1.3.6.1.4.1.4491.2.1.27.1.3.9.5.1.1 | ColumndocsPnmCmtsOptMerThreshTemplateIndex | not-accessible | current | This key represents the template index for all the modulations in a single template. Zero is reserved to mean no template in the OptReq object. |
| 1.3.6.1.4.1.4491.2.1.27.1.3.9.5.1.2 | ColumndocsPnmCmtsOptMerThreshTemplateModOrder | not-accessible | current | This key specifies the modulation types supported by the CCAP modulator. The modulation zeroValued(2) is not valid for MER threshold margin calculations. This … |
| 1.3.6.1.4.1.4491.2.1.27.1.3.9.5.1.3 | ColumndocsPnmCmtsOptMerThreshTemplateRxMerVsBitloadingTarget | read-create | current | This attribute is the required value for the profile RxMER (refer to OPT-RSP) in units of 0.25dB (0xFF is 63.75dB). This is the required RxMER value that the C… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.9.5.1.4 | ColumndocsPnmCmtsOptMerThreshTemplateRxMerMargin | read-create | current | The CM reports the number of subcarriers with a measured RxMER value that is at least this value below the target RxMER in units of 0.25dB (0xFF is 63.75dB) fo… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.9.5.1.5 | ColumndocsPnmCmtsOptMerThreshTemplateStatus | read-create | current | The row status of this instance. |
| 1.3.6.1.4.1.4491.2.1.27.1.3.10 | NodedocsPnmCmtsUtscObjects | |||
| 1.3.6.1.4.1.4491.2.1.27.1.3.10.1 | TabledocsPnmCmtsUtscCapabTable | not-accessible | current | This table exposes capabilities supported by the CCAP for Upstream Triggered Spectrum Capture trigger modes, data output formats, and windowing function used w… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.10.1.1 | RowdocsPnmCmtsUtscCapabEntry | not-accessible | current | The conceptual row of the docsPnmCmtsUtscCapabTable. The conceptual rows persist across device resets. A separate entry exists for every Upstream RF Port which… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.10.1.1.1 | ColumndocsPnmCmtsUtscCapabTriggerMode | read-only | current | This attribute indicates which of the upstream triggered spectrum capture function trigger modes is supported by the CCAP. The attribute is reported in BITS fo… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.10.1.1.2 | ColumndocsPnmCmtsUtscCapabOutputFormat | read-only | current | This attribute indicates which of the upstream triggered spectrum capture function data output formats are supported by the CCAP. This attribute is reported in… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.10.1.1.3 | ColumndocsPnmCmtsUtscCapabWindow | read-only | current | This attribute indicates which of the upstream triggered spectrum capture function window formats are supported by the CCAP. This attribute is reported in BITS… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.10.1.1.4 | ColumndocsPnmCmtsUtscCapabDescription | read-only | current | This attribute reports a textual description of a CCAPs upstream triggered spectrum capture capabilities. The format is vendor-specific. Example content can in… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.10.2 | TabledocsPnmCmtsUtscCfgTable | not-accessible | current | This table provides configuration functionality for the Upstream Triggered Spectrum Capture function. The CCAP is not required to persist instances of this obj… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.10.2.1 | RowdocsPnmCmtsUtscCfgEntry | not-accessible | current | The conceptual row of the docsPnmCmtsUtscCfgTable. The conceptual rows do not persist across device resets. A separate entry exists for every Upstream RF Port … |
| 1.3.6.1.4.1.4491.2.1.27.1.3.10.2.1.1 | ColumndocsPnmCmtsUtscCfgIndex | not-accessible | current | This key attribute is a unique identifier for a particular set of configuration settings. If the CCAP does not support multiple Upstream Triggered Spectrum Sam… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.10.2.1.2 | ColumndocsPnmCmtsUtscCfgLogicalChIfIndex | read-create | current | For SC-QAM upstream channels, this attribute is the interface index of the logical upstream channel (ifIndex 205) to which the sample capture trigger applies, … |
| 1.3.6.1.4.1.4491.2.1.27.1.3.10.2.1.3 | ColumndocsPnmCmtsUtscCfgTriggerMode | read-create | current | This attribute is used to control the trigger mode for the Upstream Triggered Spectrum Analysis sample capture. Values allowed for this attribute are listed an… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.10.2.1.4 | ColumndocsPnmCmtsUtscCfgMinislotCount | read-create | current | This attribute specifies the minislot number at the beginning of which the CCAP starts the upstream spectrum sample capture. This attribute is applicable only … |
| 1.3.6.1.4.1.4491.2.1.27.1.3.10.2.1.5 | ColumndocsPnmCmtsUtscCfgSid | read-create | current | This attribute specifies the SID corresponding to the CM which is granted a burst opportunity for the purpose of Upstream Triggered Spectrum Analysis. This att… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.10.2.1.6 | ColumndocsPnmCmtsUtscCfgCmMacAddr | read-create | current | This attribute specifies from which cable modem the CCAP will capture upstream transmissions. The CCAP triggers upstream spectrum sample capture on a grant for… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.10.2.1.7 | ColumndocsPnmCmtsUtscCfgTimestamp | read-create | current | This attribute specifies the specific time in the future when upstream spectrum sample capture is required to be initiated. If the FreeRunDuration and RepeatPe… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.10.2.1.8 | ColumndocsPnmCmtsUtscCfgCenterFreq | read-create | current | This attribute specifies the center frequency of the upstream spectrum to be sampled for analysis. When this attribute is read, it provides the actual center f… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.10.2.1.9 | ColumndocsPnmCmtsUtscCfgSpan | read-create | current | This attribute determines the frequency span of the upstream spectrum sample capture. When this attribute is read, it provides the actual span, which may be di… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.10.2.1.10 | ColumndocsPnmCmtsUtscCfgNumBins | read-create | current | This attribute determines the number of frequency bins or samples per span when sampling the upstream spectrum. When this attribute is read, it provides the ac… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.10.2.1.11 | ColumndocsPnmCmtsUtscCfgAveraging | read-create | current | This attribute specifies whether the CCAP is to average spectral frequency domain sample power to remove spurious spectral peaks and troughs, and the number of… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.10.2.1.12 | ColumndocsPnmCmtsUtscCfgFilename | read-create | current | This attribute specifies the name of the file with the upstream triggered spectrum capture data at the CCAP that is to be transferred from the CCAP using TFTP … |
| 1.3.6.1.4.1.4491.2.1.27.1.3.10.2.1.13 | ColumndocsPnmCmtsUtscCfgQualifyCenterFreq | read-create | current | This attribute specifies the center frequency of a band that is used to qualify a spectrum for upload. The average of the FFT linear power values in this band … |
| 1.3.6.1.4.1.4491.2.1.27.1.3.10.2.1.14 | ColumndocsPnmCmtsUtscCfgQualifyBw | read-create | current | This attribute specifies the bandwidth of a band that is used to qualify a spectrum for upload. The average of the FFT linear power values in this band is comp… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.10.2.1.15 | ColumndocsPnmCmtsUtscCfgQualifyThrshld | read-create | current | This attribute specifies the threshold applied to qualify a spectrum for upload. The average of the FFT linear power values in the specified band is computed a… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.10.2.1.16 | ColumndocsPnmCmtsUtscCfgWindow | read-create | current | This attribute specifies the windowing function that will be used when performing the discrete Fourier transform for the upstream spectrum analysis. Use of 'mo… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.10.2.1.17 | ColumndocsPnmCmtsUtscCfgOutputFormat | read-create | current | This attribute specifies the format of the data returned in the upstream spectrum sample capture file and in the Output attribute of the Results table. The CCA… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.10.2.1.18 | ColumndocsPnmCmtsUtscCfgRepeatPeriod | read-create | current | This attribute specifies the interval in microseconds between consecutive triggers for FFT sample capture. The CCAP is permitted to trigger at larger intervals… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.10.2.1.19 | ColumndocsPnmCmtsUtscCfgFreeRunDuration | read-create | current | This attribute specifies the length of time in milliseconds for which the CCAP continues to capture and return FFT results when in free running mode. Sample ca… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.10.2.1.20 | ColumndocsPnmCmtsUtscCfgTriggerCount | read-create | current | This attribute determines the number of times to trigger upstream spectrum sample capture when InitiateTest is set to true and configured trigger conditions ar… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.10.2.1.21 | ColumndocsPnmCmtsUtscCfgStatus | read-create | current | The status of this conceptual table row entry. |
| 1.3.6.1.4.1.4491.2.1.27.1.3.10.2.1.22 | ColumndocsPnmCmtsUtscCfgBurstIuc | read-create | current | This attribute configures the desired BurstIuc when the TriggerMode attribute is configured for burstIuc(8). IUCs that can be used include any request, station… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.10.2.1.23 | ColumndocsPnmCmtsUtscCfgMaxResultsPerFile | read-create | current | This attribute configures the maximum number of capture result sets that the CCAP is allowed to store in a capture file. When this attribute is set to a non-ze… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.10.2.1.24 | ColumndocsPnmCmtsUtscCfgDestinationIndex | read-write | current | This attribute allows the operator to optionally define a destination for the result file or files to be sent when they are available. If this attribute is lef… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.10.3 | TabledocsPnmCmtsUtscCtrlTable | not-accessible | current | The Upstream Triggered Spectrum Capture Control table provides command and control functionality for the Upstream Triggered Spectrum Capture function. This tab… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.10.3.1 | RowdocsPnmCmtsUtscCtrlEntry | not-accessible | current | The conceptual row of the docsPnmCmtsUtscCtrlTable. The conceptual rows do not persist across device resets. A separate entry exists for every Upstream RF Port… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.10.3.1.1 | ColumndocsPnmCmtsUtscCtrlInitiateTest | read-write | current | This attribute is used to trigger an Upstream Triggered Spectrum Capture. Setting this attribute to true applies all configured upstream triggered spectrum sam… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.10.4 | TabledocsPnmCmtsUtscStatusTable | not-accessible | current | The Upstream Triggered Spectrum Capture Status table provides functionality for monitoring and reporting status of the Upstream Triggered Spectrum Capture func… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.10.4.1 | RowdocsPnmCmtsUtscStatusEntry | not-accessible | current | The conceptual row of the docsPnmCmtsUtscStatusTable. A separate entry exists for every Upstream RF Port which supports the capability. |
| 1.3.6.1.4.1.4491.2.1.27.1.3.10.4.1.1 | ColumndocsPnmCmtsUtscStatusMeasStatus | read-only | current | This attribute is used to report the status of the Upstream Triggered Spectrum Capture. When the value is sampleReady, the CCAP has completed capturing and rec… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.10.4.1.2 | ColumndocsPnmCmtsUtscStatusCalibrationConstantK | read-only | current | This attribute is used to report the current value of CalibrationConstantK for the given upstream RF Port. The Calibration Constant may be affected by configur… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.10.5 | TabledocsPnmCmtsUtscResultTable | not-accessible | current | The Upstream Triggered Spectrum Capture Result table provides functionality for reporting results of the Upstream Triggered Spectrum Capture function. This tab… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.10.5.1 | RowdocsPnmCmtsUtscResultEntry | not-accessible | current | The conceptual row of the docsPnmCmtsUtscResultTable. The conceptual rows do not persist across device resets. A separate entry exists for every Upstream RF Po… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.10.5.1.1 | ColumndocsPnmCmtsUtscResultSampleRate | read-only | current | This attribute reports the FFT sample rate used by the CCAP when sampling the upstream spectrum. |
| 1.3.6.1.4.1.4491.2.1.27.1.3.10.5.1.2 | ColumndocsPnmCmtsUtscResultUsSampleSize | read-only | current | This attribute reports the number of samples collected for FFT. The FFT payload size will be the number of samples multiplied by the number of bytes per sample… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.10.5.1.3 | ColumndocsPnmCmtsUtscResultSampleTimestamp | read-only | current | This attribute reports the date and time when the FFT sample was recorded. |
| 1.3.6.1.4.1.4491.2.1.27.1.3.10.5.1.4 | ColumndocsPnmCmtsUtscResultResolutionBw | read-only | current | This attribute reports the resolution bandwidth used when samples were collected. The resolution bandwidth is the same as the bin spacing for rectangular windo… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.10.5.1.5 | ColumndocsPnmCmtsUtscResultOutput | read-only | current | This attribute returns the upstream spectrum sample capture data in hexadecimal format according to the output format configured in attribute OutputFormat. Ref… |
| 1.3.6.1.4.1.4491.2.1.27.1.3.10.5.1.6 | ColumndocsPnmCmtsUtscResultCalibrationConstantK | read-only | current | This attribute returns the calibration constant 'K' applied to all bins in an upstream spectrum capture, to allow the PNM server to obtain the upstream spectru… |
| 1.3.6.1.4.1.4491.2.1.27.1.4 | NodedocsLatencyObjects | |||
| 1.3.6.1.4.1.4491.2.1.27.1.4.1 | TabledocsCmLatencyRptCfgTable | not-accessible | current | This table provides configuration of the CM upstream latency reporting. This enables the creation of latency report files which consist of a series of latency … |
| 1.3.6.1.4.1.4491.2.1.27.1.4.1.1 | RowdocsCmLatencyRptCfgEntry | not-accessible | current | The conceptual row of the docsPnmCmLatencyRptCfgTable. An instance is dynamically created and exists for an associated ifIndex upon which the test defined by t… |
| 1.3.6.1.4.1.4491.2.1.27.1.4.1.1.1 | ColumndocsCmLatencyRptCfgSnapshotDuration | read-write | current | This attribute represents the measurement duration of service flow latency estimates. One row of statistics per service flow is captured during this interval. |
| 1.3.6.1.4.1.4491.2.1.27.1.4.1.1.2 | ColumndocsCmLatencyRptCfgNumSnapshots | read-write | current | This attribute represents the number of Snapshots batched into a file. The total duration represented by the file is the product of the SnapshotDuration and Nu… |
| 1.3.6.1.4.1.4491.2.1.27.1.4.1.1.3 | ColumndocsCmLatencyRptCfgNumFiles | read-write | current | This attribute represents the number of file uploads to be performed as defined below: 0 File Generation Disabled 1 .. 254 Number of files to generate. Counts … |
| 1.3.6.1.4.1.4491.2.1.27.1.4.1.1.4 | ColumndocsCmLatencyRptCfgMeasStatus | read-only | current | This attribute is used to determine the status of the measurement. The enumerated value, 'sampleReady', is not applicable. |
| 1.3.6.1.4.1.4491.2.1.27.1.4.1.1.5 | ColumndocsCmLatencyRptCfgFileName | read-write | current | This attribute is the prefix for the name of the file which the CM creates to store latency histogram snapshots. This value can only be changed while a test is… |
| 1.3.6.1.4.1.4491.2.1.27.1.4.2 | TabledocsCmtsLatencyRptCfgTable | not-accessible | current | This table reports configuration of the CMTS downstream latency reporting, configures parameters for downstream queue latency estimate data collection and repo… |
| 1.3.6.1.4.1.4491.2.1.27.1.4.2.1 | RowdocsCmtsLatencyRptCfgEntry | not-accessible | current | The conceptual row of the docsCmtsLatencyRptCfgTable. An instance is dynamically created and exists for an associated ifIndex upon which the test defined by th… |
| 1.3.6.1.4.1.4491.2.1.27.1.4.2.1.1 | ColumndocsCmtsLatencyRptCfgCmMac | not-accessible | current | This key attribute specifies the MAC address of the CM for which the CMTS will generate downstream QueueLatency Report(s). |
| 1.3.6.1.4.1.4491.2.1.27.1.4.2.1.2 | ColumndocsCmtsLatencyRptCfgSnapshotDuration | read-create | current | This attribute represents the measurement duration of service flow latency estimates. One row of statistics per service flow is captured during this interval. |
| 1.3.6.1.4.1.4491.2.1.27.1.4.2.1.3 | ColumndocsCmtsLatencyRptCfgNumSnapshots | read-create | current | This attribute represents the number of Snapshots batched into a file. The total duration represented by the file is the product of the SnapshotDuration and Nu… |
| 1.3.6.1.4.1.4491.2.1.27.1.4.2.1.4 | ColumndocsCmtsLatencyRptCfgNumFiles | read-create | current | This attribute represents the number of file uploads to be performed. The CMTS generates a latency report file when this value is set to a non-zero value. The … |
| 1.3.6.1.4.1.4491.2.1.27.1.4.2.1.5 | ColumndocsCmtsLatencyRptCfgMeasStatus | read-only | current | This attribute is used to determine the status of the measurement. |
| 1.3.6.1.4.1.4491.2.1.27.1.4.2.1.6 | ColumndocsCmtsLatencyRptCfgFileName | read-create | current | This attribute contains the name of the file which the CMTS creates to store latency histogram snapshots. This value can only be changed while a test is not in… |
| 1.3.6.1.4.1.4491.2.1.27.1.4.2.1.7 | ColumndocsCmtsLatencyRptCfgDestinationIndex | read-create | current | This attribute is the index of the configured destination for the file upload. |
| 1.3.6.1.4.1.4491.2.1.27.1.4.2.1.8 | ColumndocsCmtsLatencyRptRowStatus | read-create | current | The conceptual row status for this table. |
| 1.3.6.1.4.1.4491.2.1.27.1.4.3 | TabledocsDsSfLatencyCfgMetaDataTable | not-accessible | current | This table reports the per-service flow downstream queue latency estimates calculation settings and provides the interface to modify snapshot settings. A delay… |
| 1.3.6.1.4.1.4491.2.1.27.1.4.3.1 | RowdocsDsSfLatencyCfgMetaDataEntry | not-accessible | current | The conceptual row of the docsDsSfLatencyCfgMetaDataTable. |
| 1.3.6.1.4.1.4491.2.1.27.1.4.3.1.1 | ColumndocsDsSfLatencyCfgMetaDataSfId | not-accessible | current | This index is the service flow identifier specifying the service flow for which downstream queue latency estimates were measured and reported in the docsCmtsLa… |
| 1.3.6.1.4.1.4491.2.1.27.1.4.3.1.2 | ColumndocsDsSfLatencyCfgMetaDataSfLabel | read-only | current | This attribute represents the Service Class Name or Label (configured by the operator) to be used in Service Flow Latency Performance Reporting. The Operator c… |
| 1.3.6.1.4.1.4491.2.1.27.1.4.3.1.3 | ColumndocsDsSfLatencyCfgMetaDataNumBinEdges | read-only | current | This attribute reports the number of packet queue latency estimate histogram bin edges defined for the latency histogram for measurement on this service flow. … |
| 1.3.6.1.4.1.4491.2.1.27.1.4.3.1.4 | ColumndocsDsSfLatencyCfgMetaDataBinEdgeDefinitionsArray | read-only | current | This attribute reports the time values in tens of microseconds, for the edges or boundaries between downstream service flow queue latency estimates histogram b… |
| 1.3.6.1.4.1.4491.2.1.27.1.4.3.1.5 | ColumndocsDsSfLatencyCfgMetaDataFirstSnapshotStartTimestamp | read-only | current | This attribute reports the start time for the first Snapshot entry for this instance. The value of this attribute is the number of seconds that have elapsed si… |
| 1.3.6.1.4.1.4491.2.1.27.1.4.4 | TabledocsDsSfSnapshotDataTable | not-accessible | current | This object reports downstream queue latency estimates summary data and histogram bin data for a service flow during a Snapshot Interval. A Snapshot Interval i… |
| 1.3.6.1.4.1.4491.2.1.27.1.4.4.1 | RowdocsDsSfSnapshotDataEntry | not-accessible | current | The conceptual row of the docsDsSfSnapshotDataTable. |
| 1.3.6.1.4.1.4491.2.1.27.1.4.4.1.1 | ColumndocsDsSfSnapshotDataSnapshotEndTimestamp | read-only | current | This attribute reports the time, expressed in the number of seconds that have elapsed since midnight Coordinated Universal Time (UTC) Thursday, January 1, 1970… |
| 1.3.6.1.4.1.4491.2.1.27.1.4.4.1.2 | ColumndocsDsSfSnapshotDataBinCountsArray | read-only | current | This attribute reports the count of queue latency estimates for this service flow, for each configured histogram bin, during the snapshot interval. This attrib… |
| 1.3.6.1.4.1.4491.2.1.27.1.4.4.1.3 | ColumndocsDsSfSnapshotDataMaxLatency | read-only | current | This attribute reports the maximum of all queue latency estimates measured by the CMTS for this service flow during the Snapshot Interval. |
| 1.3.6.1.4.1.4491.2.1.27.1.4.4.1.4 | ColumndocsDsSfSnapshotDataNumHistogramUpdates | read-only | current | This attribute reports the sum of downstream service flow queue latency estimates recorded as bin counts, in the service flow queue latency estimates histogram… |
| 1.3.6.1.4.1.4491.2.1.27.1.4.4.1.5 | ColumndocsDsSfSnapshotDataSanctionedPkts | read-only | current | This attribute reports the count of packets redirected from a Downstream Low Latency Service Flow to the Classic Service Flow in the CCAP during the Snapshot I… |
| 1.3.6.1.4.1.4491.2.1.27.1.4.4.1.6 | ColumndocsDsSfSnapshotDataDroppedPkts | read-only | current | The attribute reports the count of dropped packets on the specified service flow during the Snapshot Interval. |
| 1.3.6.1.4.1.4491.2.1.27.1.4.4.1.7 | ColumndocsDsSfSnapshotDataTotalEct0Pkts | read-only | current | This attribute reports the count of packets on the specified service flow that arrived marked as ECT0 during the Snapshot Interval. |
| 1.3.6.1.4.1.4491.2.1.27.1.4.4.1.8 | ColumndocsDsSfSnapshotDataTotalEct1Pkts | read-only | current | This attribute reports the count of packets on the specified service flow that arrived marked as ECT1 during the Snapshot Interval. |
| 1.3.6.1.4.1.4491.2.1.27.1.4.4.1.9 | ColumndocsDsSfSnapshotDataCeMarkedEct1Pkts | read-only | current | This attribute reports the count of packets that arrived on the specified Downstream Low Latency Service Flow marked as ECT1 and as Congestion Experienced (CE)… |
| 1.3.6.1.4.1.4491.2.1.27.2 | NodedocsPnmMibConformance | |||
| 1.3.6.1.4.1.4491.2.1.27.2.1 | NodedocsPnmMibCompliances | |||
| 1.3.6.1.4.1.4491.2.1.27.2.1.1 | CompliancedocsPnmCmtsCompliance | current | The compliance statement for the CMTS. | |
| 1.3.6.1.4.1.4491.2.1.27.2.1.2 | CompliancedocsPnmCmCompliance | current | The compliance statement for the CM. | |
| 1.3.6.1.4.1.4491.2.1.27.2.1.3 | CompliancedocsPnmCmtsDeprecatedCompliance | deprecated | The compliance statement for deprecated objects. | |
| 1.3.6.1.4.1.4491.2.1.27.2.2 | NodedocsPnmMibGroups | |||
| 1.3.6.1.4.1.4491.2.1.27.2.2.1 | GroupdocsPnmBulkDataGroup | current | Group of objects implemented for CM Bulk-Data support | |
| 1.3.6.1.4.1.4491.2.1.27.2.2.2 | GroupdocsPnmCmtsGroup | current | Group of objects implemented in the CMTS | |
| 1.3.6.1.4.1.4491.2.1.27.2.2.3 | GroupdocsPnmCmGroup | current | Group of objects implemented in the CM | |
| 1.3.6.1.4.1.4491.2.1.27.2.2.4 | GroupdocsPnmCmtsDeprecatedGroup | deprecated | Deprecated Objects implemented in the CMTS | |
| 1.3.6.1.4.1.4491.2.1.27.2.2.5 | GroupdocsPnmCcapBulkDataGroup | deprecated | Group of objects implemented for CCAP Bulk-Data support | |
| 1.3.6.1.4.1.4491.2.1.27.2.2.6 | GroupdocsLatencyGroup | current | Group of objects implemented for CM and CCAP Latency Reports | |
| 1.3.6.1.4.1.4491.2.1.27.2.2.7 | GroupdocsCcapFileTransferGroup | current | Group of objects implemented for CCAP Bulk File Transfer |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| MeasStatusType | INTEGER {other(1), inactive(2), busy(3), sampleReady(4), error(5), resourceUnavailable(6), sampleTruncated(7), interfaceModification(8) } | current | This data type is used to determine the state of a measurement. The enumerated values associated with MeasStatusType are: 'other' Indicates any state not described below. 'inactive' Indicates that a test is not started … |
| ThousandthdB | Integer32 | current | This data type represents power levels that are normally expressed in dB. Units are in thousands of a dB; for example, 5.175 dB will be represented as 5175. |
| UsOfdmaWindowingSizeType | Unsigned32 (0 | 32 | 64 | 96 | 128 | 160 | 192 | 224) | current | This data type is defined to specify the eight possible values for the upstream windowing roll-off period samples. The Roll-Off Period Samples (NRP) are given in number of samples using the sample rate of 102.4 Msamples… |