MIB Viewer

DPNSS-MIB

53 objects
The MIB module to describe the management of DPNSS interfaces.
Imported Objects
IANAifType-MIBIANAifType
IF-MIBifIndex InterfaceIndex
SNMPv2-CONFMODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMICounter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE transmission
SNMPv2-TCDisplayString TimeStamp
OIDNameAccessStatusDescription
1.3.6.1.2.1.10.999IdentitydpnssMibThe MIB module to describe the management of DPNSS interfaces.
1.3.6.1.2.1.10.999.1TabledpnssSigTablenot-accessiblecurrentDPNSS Signaling Table containing configuration and statistical parameters for all DPNSS signaling channel interfaces on this managed device.
1.3.6.1.2.1.10.999.1.1RowdpnssSigEntrynot-accessiblecurrentAn entry in the DPNSS Signaling Channel Table.
1.3.6.1.2.1.10.999.1.1.1ColumndpnssSigIndexnot-accessiblecurrentThe index value which uniquely identifies an entry in the dpnssSigTable.
1.3.6.1.2.1.10.999.1.1.2ColumndpnssSigIfIndexread-onlycurrentThe ifIndex value of the interface associated with this signaling channel.
1.3.6.1.2.1.10.999.1.1.3ColumndpnssSigTrkCountread-onlycurrentThe total number of DPNSS Trunks(bearer channels) managed by this signaling channel. For E1 this will be 30 and for T1 it will be 24.
1.3.6.1.2.1.10.999.1.1.4ColumndpnssSigInfoTrapEnableread-writecurrentIndicates whether dpnssMibCallInformation traps should be generated for calls on this signaling channel.
1.3.6.1.2.1.10.999.1.1.5ColumndpnssSigEndPtTyperead-writecurrentThis object shall be used such that the two PBXs at each end of the transmission link shall be designated A & B by arrangement at configuration as specified in…
1.3.6.1.2.1.10.999.1.1.6ColumndpnssSigL2ReTxnsread-writecurrentThis is the minimum retransmission count limit designated as 'NL' in BTNR 188. This is the minimum number of retransmissions of a command frame, which must tak…
1.3.6.1.2.1.10.999.1.1.7ColumndpnssSigL2ReTxnTimeoutread-writecurrent
1.3.6.1.2.1.10.999.1.1.8ColumndpnssSigL2ReTxnAckTimeoutread-writecurrentThis is the minimum post retransmission acknowledgment delay designated as 'NT2' in BTNR 188. This is the minimum period of time after the expiry of NL and NT1…
1.3.6.1.2.1.10.999.1.1.9ColumndpnssSigLinkOperStatusread-writecurrentParameter specifying the different DPNSS Signaling channel states. The maintenance states - bsy, inb and offline does not directly correspond to a DLC state in…
1.3.6.1.2.1.10.999.1.1.10ColumndpnssSigL2InCallsConnread-onlycurrentThe number of peer SABMR frames successfully received on this interface. This is the number of peer-initiated new connections on this interface. This does not …
1.3.6.1.2.1.10.999.1.1.11ColumndpnssSigL3InCallsConnread-onlycurrentThe number of incoming calls on this interface which were actually connected.
1.3.6.1.2.1.10.999.1.1.12ColumndpnssSigL2OutCallsConnread-onlycurrentThe number of SABMR frames sent from this interface. This is the number of new connections initiated from this interface.
1.3.6.1.2.1.10.999.1.1.13ColumndpnssSigL3OutCallsConnread-onlycurrentThe number of outgoing calls on this interface which were actually connected.
1.3.6.1.2.1.10.999.1.1.14ColumndpnssSigL2AttemptedConnsread-onlycurrentThe number of peer SABMR frames received on this interface. This is the number of peer-initiated new connections on this interface. This also includes the SABM…
1.3.6.1.2.1.10.999.1.1.15ColumndpnssSigUnprocessedUIsread-onlycurrentThe number of peer UI frames received on this interface but could not be processed successfully (e.g. due to layer 2 overload). This count gives the unsuccessf…
1.3.6.1.2.1.10.999.2TabledpnssDLCTablenot-accessiblecurrentDPNSS DLC table containing configuration and DLC characteristic parameters for all DPNSS DLCs on this managed device. One Entry for each Lap (total of 60 Entri…
1.3.6.1.2.1.10.999.2.1RowdpnssDLCEntrynot-accessiblecurrentAn entry in the DPNSS DLC Table.
1.3.6.1.2.1.10.999.2.1.1ColumndpnssDLCSigIfIndexread-onlycurrentThe ifIndex value corresponding to the DPNSS signaling channel that is responsible for this DLC. It is important to note that this is also the index for the dp…
1.3.6.1.2.1.10.999.2.1.2ColumndpnssDLCNumread-onlycurrentThe identifier being used by the signaling protocol to identify this DLC, also referred to as 'Link Access Protocol (LAP) Number'.
1.3.6.1.2.1.10.999.2.1.3ColumndpnssDLCInfoTrapEnableread-writecurrentIndicates whether dpnssMibCallInformation traps should be generated for calls on this DLC.
1.3.6.1.2.1.10.999.2.1.4ColumndpnssDLCReTxnsread-writecurrentThis is the minimum retransmission count limit designated as 'NL' in BTNR 188. This is the minimum number of retransmissions of a command frame which must take…
1.3.6.1.2.1.10.999.2.1.5ColumndpnssDLCReTxnTimeoutread-writecurrentThis is the minimum retransmission period designated as 'NT1' in BTNR 188. This is the minimum period of time for which a command frame must be retransmitted i…
1.3.6.1.2.1.10.999.2.1.6ColumndpnssDLCReTxnAckTimeoutread-writecurrentThis is the minimum post retransmission acknowledgment delay designated as 'NT2' in BTNR 188. This is the minimum period of time after the expiry of NL and NT1…
1.3.6.1.2.1.10.999.2.1.7ColumndpnssDLCOperStatusread-writecurrentParameter specifying the different DPNSS Layer 2 DLC states. oos - Out Of Service This State can be entered immediately following power up or due to a maintena…
1.3.6.1.2.1.10.999.2.1.8ColumndpnssDLCTyperead-onlycurrentIndicates whether it is a real or virtual DLC.
1.3.6.1.2.1.10.999.2.1.9ColumndpnssDLCFrmErrsread-onlycurrentNumber of L2 Framing Errors.
1.3.6.1.2.1.10.999.2.1.10ColumndpnssDLCUnprocessedUIsread-onlycurrentThe number of peer UI frames received on this interface but could not be processed successfully (e.g. due to layer 2 overload). This count gives the unsuccessf…
1.3.6.1.2.1.10.999.3TabledpnssTrkTablenot-accessiblecurrentThis table defines port specific operational, statistics and active call data for DPNSS Trunks. Each entry in this table describes one DPNSS Trunk channel.
1.3.6.1.2.1.10.999.3.1RowdpnssTrkEntrynot-accessiblecurrentOperational and statistics information relating to one port. A port is a single DPNSS (Trunk).
1.3.6.1.2.1.10.999.3.1.1ColumndpnssTrkIfIndexread-onlycurrentThe index value which uniquely identifies an entry in the dpnssTrkTable.
1.3.6.1.2.1.10.999.3.1.2ColumndpnssTrkSigIfIndexread-onlycurrentThe ifIndex value corresponding to the DPNSS signaling channel that serves as the signaling channel for this trunk.
1.3.6.1.2.1.10.999.3.1.3ColumndpnssTrkNumread-onlycurrentThe identifier being used by a signaling protocol to identify this trunk, also referred to as trunk number. If the Agent also supports the DS0 MIB, the values …
1.3.6.1.2.1.10.999.3.1.4ColumndpnssTrkInfoTrapEnableread-writecurrentIndicates whether dpnssMibCallInformation traps should be generated for calls over this Trunk.
1.3.6.1.2.1.10.999.3.1.5ColumndpnssTrkOperStatusread-writecurrent
1.3.6.1.2.1.10.999.3.1.6ColumndpnssTrkOpulseTyperead-writecurrentIndicates the type of digit outpulsing that will be done for a call-setup over this trunk.
1.3.6.1.2.1.10.999.3.1.7ColumndpnssTrkDirread-writecurrentThe direction of the trunk call that will be supported over this trunk. ic - Allow only Incoming calls over this trunk og - Allow only Outgoing calls over this…
1.3.6.1.2.1.10.999.3.1.8ColumndpnssTrkIfAddressread-writecurrentInterface address if any, in IA5 format of the DPNSS trunk Interface
1.3.6.1.2.1.10.999.3.1.9ColumndpnssTrkCallSetupTimeread-onlycurrentThe value of sysUpTime when the DPNSS setup message [DPNSS Initial Service Request Message (ISRM)] for the current or last call was sent or received. If since …
1.3.6.1.2.1.10.999.3.1.10ColumndpnssTrkCallConnectTimeread-onlycurrentThe value of sysUpTime when the DPNSS connect message [DPNSS Call Connect Message (CCM)] for the current or last call was sent or received. If since system sta…
1.3.6.1.2.1.10.999.4TabledpnssTrkMappingTablenot-accessiblecurrentThe dpnssTrkMappingTable is used for quick look-up to associate a dpnss trunk with the corresponding dpnss signaling channel.
1.3.6.1.2.1.10.999.4.1RowdpnssTrkMappingEntrynot-accessiblecurrentThis is an entry in the DPNSS Trunk Mapping table. There is a entry in this table corresponding to each DPNSS trunk ifEntry. This table is intended to facilita…
1.3.6.1.2.1.10.999.4.1.1ColumndpnssTrkMappingIfIndexread-onlycurrentThis object indicates the ifIndex value assigned by the agent for the individual dpnss trunk ifEntry that corresponds to the given dpnss trunk number (specifie…
1.3.6.1.2.1.10.999.5NodedpnssMibTraps
1.3.6.1.2.1.10.999.5.0.1NotificationdpnssMibLinkInformationcurrentThis trap/information is sent to the manager under the following conditions: - The dpnssSigLinkOperStatus goes to one of oos, resetAttempted, overload, recvOve…
1.3.6.1.2.1.10.999.5.0.2NotificationdpnssMibDLCSigInformationcurrentThis trap/information is sent to the manager under the following conditions: - the dpnssDLCOperStatus goes to one of overload, recvOverrun, babbling, or crptMs…
1.3.6.1.2.1.10.999.5.0.3NotificationdpnssMibTrkInformationcurrentThis trap/information is sent to the manager under the following conditions: - the dpnssTrkOperStatus goes to one of lockout, inb or offLine.
1.3.6.1.2.1.10.999.6NodedpnssMibConformance
1.3.6.1.2.1.10.999.6.2NodedpnssMibGroups
1.3.6.1.2.1.10.999.6.2.1GroupdpnssMibSigGroupcurrentA collection of objects providing configuration and statistical information applicable to all DPNSS signaling channel interfaces.
1.3.6.1.2.1.10.999.6.2.2GroupdpnssMibTrkGroupcurrentA collection of objects providing configuration, statistical & signaling channel - trunk mapping information applicable to all DPNSS trunk interfaces.