MIB Viewer

DPT-SCSI-MIB

215 objects
No module-level DESCRIPTION found.
Imported Objects
RFC-1212OBJECT-TYPE
RFC-1215TRAP-TYPE
RFC1155-SMICounter enterprises Gauge TimeTicks
OIDNameAccessStatusDescription
1.3.6.1.4.1.1597Nodedpt
1.3.6.1.4.1.1597.1NodedptScsi
1.3.6.1.4.1.1597.1.1NodedptScsiSys
1.3.6.1.4.1.1597.1.1.1ScalardptScsiSysRevLevelread-onlymandatoryDPT SCSI system SNMP agent revision information.
1.3.6.1.4.1.1597.1.1.2ScalardptScsiSysEngineSignatureread-onlymandatoryDPT signature for the DPT engine. This contains information on engine version and creation date/time.
1.3.6.1.4.1.1597.1.1.3ScalardptScsiSysDriverSignatureread-onlymandatoryDPT signature for the driver currently in use by the SNMP agent. This contains information on driver version and creation date/time.
1.3.6.1.4.1.1597.1.1.4ScalardptScsiSysEventLoggerSignatureread-onlymandatoryDPT signature for the event logger/broadcaster currently in use by the SNMP agent. This contains information on event logger/broadcaster version and creation d…
1.3.6.1.4.1.1597.1.1.5ScalardptScsiSysMibRevMajorread-onlymandatoryThe Major Revision level. A change in the major revision level represents a major change in the architecture of the MIB. A change in the major revision level m…
1.3.6.1.4.1.1597.1.1.6ScalardptScsiSysMibRevMinorread-onlymandatoryThe Minor Revision level. A change in the minor revision level may represent some minor additional support; no changes to any pre-existing information has occu…
1.3.6.1.4.1.1597.1.2NodedptScsiHba
1.3.6.1.4.1.1597.1.2.1TabledptScsiHbaTablenot-accessiblemandatoryA list of RAID controllers managed by the DPT SCSI system.
1.3.6.1.4.1.1597.1.2.1.1RowdptScsiHbaEntrynot-accessiblemandatoryA set of parameters that describe/control a DPT RAID controller. See 'SmartRAID User's Manual' for detailed explanation of the parameters.
1.3.6.1.4.1.1597.1.2.1.1.1ColumndptScsiHbaNumberread-onlymandatoryAn index that uniquely identifies a row in dptHbaTable that pertains to a particular controller. The value of this object is the logical device identifier for …
1.3.6.1.4.1.1597.1.2.1.1.2ColumndptScsiHbaVendorread-onlymandatoryThe name of the vendor of the controller.
1.3.6.1.4.1.1597.1.2.1.1.3ColumndptScsiHbaModelread-onlymandatoryThe controller model identifier.
1.3.6.1.4.1.1597.1.2.1.1.4ColumndptScsiHbaFirmwareread-onlymandatoryThe controller firmware version.
1.3.6.1.4.1.1597.1.2.1.1.5ColumndptScsiHbaSerialNumberread-onlymandatoryThe controller serial number.
1.3.6.1.4.1.1597.1.2.1.1.6ColumndptScsiHbaAddressread-onlymandatoryThe controller Address (normally displayed in hex.) It is a 32-bit value representing the memory address used by the controller
1.3.6.1.4.1.1597.1.2.1.1.7ColumndptScsiHbaHostBusTyperead-onlymandatoryThe type of host computer system bus this controller is attached to.
1.3.6.1.4.1.1597.1.2.1.1.8ColumndptScsiHbaHostBusMaxTransferRateread-onlymandatoryThe maximum possible transfer rate on the host bus in MB/s.
1.3.6.1.4.1.1597.1.2.1.1.9ColumndptScsiHbaIrqread-onlymandatoryThe controller interrupt level.
1.3.6.1.4.1.1597.1.2.1.1.10ColumndptScsiHbaIrqTyperead-onlymandatoryThe controller interrupt type (Edge or Level).
1.3.6.1.4.1.1597.1.2.1.1.11ColumndptScsiHbaDrqread-onlydeprecatedThe controller DMA channel. This object is only applicable for ISA controllers. Its value is 'notApplicable' for the other types of controllers.
1.3.6.1.4.1.1597.1.2.1.1.12ColumndptScsiHbaRaidModuleread-onlymandatoryController RAID module type: SmartRAID Millennium controllers support all RAID levels without the addition of a RAID Module. These controllers will show 'Embed…
1.3.6.1.4.1.1597.1.2.1.1.13ColumndptScsiHbaCachingModuleread-onlydeprecatedThe controller caching module. 'Embedded' means that the disk array function is built inside the controller (SmartRAID products.)
1.3.6.1.4.1.1597.1.2.1.1.14ColumndptScsiHbaAudibleAlarmOnread-onlymandatoryThis returns the current status of the controller alarm.
1.3.6.1.4.1.1597.1.2.1.1.15ColumndptScsiHbaUpTimeread-onlymandatoryTime elapsed (in hundredths of a second) since the controller was last booted.
1.3.6.1.4.1.1597.1.2.1.1.16ColumndptScsiHbaEccEnabledread-onlymandatoryThis indicates whether or not the controller is using DPT ECC memory. 'Yes' means that the installed memory is DPT ECC memory and full ECC protection is active.
1.3.6.1.4.1.1597.1.2.1.1.17ColumndptScsiHbaBackgroundTaskPriorityread-onlymandatoryThis object controls the priority of array background tasks such as Build, Rebuild and Verify for this controller. The values range from 1 to 10. A value of 1 …
1.3.6.1.4.1.1597.1.2.1.1.18ColumndptScsiHbaExclusionPeriodEnabledread-onlydeprecatedController exclution period is the time span during which it devotes 100% of its time fulfilling requests for data reads/writes and zero percent on background …
1.3.6.1.4.1.1597.1.2.1.1.19ColumndptScsiHbaExclusionPeriodStartread-onlydeprecatedHour of beginning of the exclusion period. For example, a value of 0 means that the exclusion starts at 12 a.m. The maximum duration of an exclusion period can…
1.3.6.1.4.1.1597.1.2.1.1.20ColumndptScsiHbaExclusionPeriodEndread-onlydeprecatedHour when exclusion period ends. For example, a value of 23 means that the exclusion ends at 11 p.m. The maximum duration of an exclusion period can be 24 hour…
1.3.6.1.4.1.1597.1.2.1.1.21ColumndptScsiHbaMaxReadAheadPercentageread-onlydeprecatedMax percentage of contoller cache RAM devoted to read-ahead pages. This value is not applicable to SmartRAID V and later controllers. For these controllers, th…
1.3.6.1.4.1.1597.1.2.1.1.22ColumndptScsiHbaMaxDirtyPagesPercentageread-onlydeprecatedMax percentage of controller cache RAM that may contain dirty pages. This value is not applicable to SmartRAID V and later controllers. For these controllers, …
1.3.6.1.4.1.1597.1.2.1.1.23ColumndptScsiHbaWriteBackDelayread-onlydeprecatedWrite-back delay in milliseconds. This value is not applicable to SmartRAID V and later controllers. For these controllers, this value will be set to 250.
1.3.6.1.4.1.1597.1.2.1.1.24ColumndptScsiHbaTemperatureread-onlymandatoryTemperature status reported by the controller.
1.3.6.1.4.1.1597.1.2.1.1.25ColumndptScsiHbaVoltageread-onlymandatory5V voltage status reported by the controller.
1.3.6.1.4.1.1597.1.2.1.1.26ColumndptScsiHbaBadMemoryAddressread-onlymandatoryIf the controller detects a cache RAM error, the address of the most recent error is stored here. Otherwise it indicates that no errors have been detected. Val…
1.3.6.1.4.1.1597.1.2.1.1.27ColumndptScsiHbaBatteryModuleread-onlymandatoryThe Battery Backup Module preserves all controller cache and local memory contents in the event of power loss to the system
1.3.6.1.4.1.1597.1.2.1.1.28ColumndptScsiHbaBatteryStatusread-onlymandatoryBattery status reported by the controller.
1.3.6.1.4.1.1597.1.2.1.1.29ColumndptScsiHbaHighestBusWithDevicesread-onlymandatoryThe bus number of the highest numbered bus on this controller which has devices currently attached to it.
1.3.6.1.4.1.1597.1.2.1.1.30ColumndptScsiHbaGeneralStatusread-onlymandatoryGeneral controller status. The following are the possible values: ok - the controller and all components attached to it, such as disks and arrays, are OK. fail…
1.3.6.1.4.1.1597.1.2.1.1.31ColumndptScsiHbaSmorSignatureread-onlymandatoryThe controller S.M.O.R. revision information. Not available for SmartRAID IV and earlier controllers.
1.3.6.1.4.1.1597.1.2.1.1.32ColumndptScsiHbaBiosSignatureread-onlymandatoryThe controller B.I.O.S. revision information. Not available for SmartRAID IV and earlier controllers.
1.3.6.1.4.1.1597.1.2.1.1.33ColumndptScsiHbaNvramLayoutread-onlymandatoryThe controller NVRAM layout revision.
1.3.6.1.4.1.1597.1.2.2TabledptScsiHbaCacheSocketTablenot-accessiblemandatoryA list of the cache memory module sockets on the controller.
1.3.6.1.4.1.1597.1.2.2.1RowdptScsiHbaCacheSocketEntrynot-accessiblemandatoryThese parameters describe the cache memory module sockets on a controller.
1.3.6.1.4.1.1597.1.2.2.1.1ColumndptScsiHbaCacheSocketNumberread-onlymandatoryA controller can have up to 4 cache sockets. This is the index in the table of cache memory module sockets.
1.3.6.1.4.1.1597.1.2.2.1.2ColumndptScsiHbaCacheModuleTyperead-onlymandatoryType of a cache memory module.
1.3.6.1.4.1.1597.1.2.2.1.3ColumndptScsiHbaCacheModuleSizeread-onlymandatorySize of a cache memory module.
1.3.6.1.4.1.1597.1.3NodedptScsiBus
1.3.6.1.4.1.1597.1.3.1TabledptScsiBusTablenot-accessiblemandatoryA list of the SCSI buses on a system.
1.3.6.1.4.1.1597.1.3.1.1RowdptScsiBusEntrynot-accessiblemandatoryThese parameters describe/control a SCSI Bus. The entry is indexed by dptScsiHbaNumber and dptScsiBusNumber. dptScsiHbaNumber determines to which controller th…
1.3.6.1.4.1.1597.1.3.1.1.1ColumndptScsiBusNumberread-onlymandatoryAn index that, along with dptScsHbaNumber uniquely, identifies an entry in the dptScsiBusTable for a particular SCSI Bus.
1.3.6.1.4.1.1597.1.3.1.1.2ColumndptScsiBusWidthread-onlymandatoryThe SCSI Bus width.
1.3.6.1.4.1.1597.1.3.1.1.3ColumndptScsiBusTyperead-onlymandatoryThe SCSI Bus transceiver type.
1.3.6.1.4.1.1597.1.3.1.1.4ColumndptScsiBusMaxTransferRateread-onlymandatoryThe SCSI Bus maximum transfer rate in MB/s. Valid values are 4, 5, 8, 10, 20, 40, 80, 100, 160, etc., depending on the SCSI technology used.
1.3.6.1.4.1.1597.1.3.1.1.5ColumndptScsiBusHbaScsiIdread-onlymandatoryThe SCSI ID of the controller on this SCSI Bus.
1.3.6.1.4.1.1597.1.3.1.1.6ColumndptScsiBusHbaTermPowerread-onlymandatoryIndicates the SCSI term-power setting (on/off) for this bus.
1.3.6.1.4.1.1597.1.3.1.1.7ColumndptScsiBusHbaTerminationread-onlymandatoryIndicates the SCSI termination setting for this bus.
1.3.6.1.4.1.1597.1.4NodedptScsiDev
1.3.6.1.4.1.1597.1.4.1TabledptScsiDevTablenot-accessiblemandatoryA list of SCSI devices managed by the SNMP agent.
1.3.6.1.4.1.1597.1.4.1.1RowdptScsiDevEntrynot-accessiblemandatoryThese parameters describe/control a particular SCSI Device. The index for this entry is the logical device address of the SCSI device. The logical device addre…
1.3.6.1.4.1.1597.1.4.1.1.1ColumndptScsiDevIdread-onlymandatoryThe SCSI ID of the device.
1.3.6.1.4.1.1597.1.4.1.1.2ColumndptScsiDevLunread-onlymandatoryThe SCSI LUN (logical unit number) of the device.
1.3.6.1.4.1.1597.1.4.1.1.3ColumndptScsiDevLevelread-onlymandatoryIndicates the Level of the device. Level 0 indicates physical devices, while level 1 and 2 indicate logical devices. It also gives its level in the containment…
1.3.6.1.4.1.1597.1.4.1.1.4ColumndptScsiDevVendorread-onlymandatoryThe name of the vendor of the device.
1.3.6.1.4.1.1597.1.4.1.1.5ColumndptScsiDevModelread-onlymandatoryThe model name of the device.
1.3.6.1.4.1.1597.1.4.1.1.6ColumndptScsiDevRevisionread-onlymandatoryThe revision level of the device.
1.3.6.1.4.1.1597.1.4.1.1.7ColumndptScsiDevSerialNumberread-onlymandatoryThe serial number of the device.
1.3.6.1.4.1.1597.1.4.1.1.8ColumndptScsiDevStatusread-onlymandatoryThe administrative state of the device. The following are all the possible values: invalid - current value is invalid. optimal - device is fully functional and…
1.3.6.1.4.1.1597.1.4.1.1.9ColumndptScsiDevBusWidthread-onlymandatoryThe data width of the SCSI device (not applicable to logical devices).
1.3.6.1.4.1.1597.1.4.1.1.10ColumndptScsiDevCapacityread-onlymandatoryThe storage capacity of the device in MB.
1.3.6.1.4.1.1597.1.4.1.1.11ColumndptScsiDevLogicalBlockSizeread-onlymandatoryLogical block size of the device in bytes.
1.3.6.1.4.1.1597.1.4.1.1.12ColumndptScsiDevPhysicalBlockSizeread-onlymandatoryPhysical block size of the device in bytes. Not applicable for logical devices and will be the logical block size.
1.3.6.1.4.1.1597.1.4.1.1.13ColumndptScsiDevNegTransferRateread-onlymandatoryThe negotiated transfer rate of the device in MB/s. For logical devices, this value is not applicable and will return 0.
1.3.6.1.4.1.1597.1.4.1.1.14ColumndptScsiDevRemovableread-onlymandatoryIndicates whether or not the device is removable.
1.3.6.1.4.1.1597.1.4.1.1.15ColumndptScsiDevEccEnabledread-onlydeprecatedIndicates whether the device has ECC enabled or disabled.
1.3.6.1.4.1.1597.1.4.1.1.16ColumndptScsiDevScsiVersionread-onlymandatoryIndicates the SCSI specification version of the device.
1.3.6.1.4.1.1597.1.4.1.1.17ColumndptScsiDevSoftResetread-onlymandatoryIndicates whether the device supports soft reset.
1.3.6.1.4.1.1597.1.4.1.1.18ColumndptScsiDevCmdQueuingread-onlymandatoryIndicates whether the device is supports command queuing.
1.3.6.1.4.1.1597.1.4.1.1.19ColumndptScsiDevLinkedCmdsread-onlymandatoryIndicates whether the device support linked commands (not applicable to logical devices).
1.3.6.1.4.1.1597.1.4.1.1.20ColumndptScsiDevSynchronousread-onlymandatoryIndicates whether the device supports synchronous data transfers.
1.3.6.1.4.1.1597.1.4.1.1.21ColumndptScsiDevRelAddrread-onlymandatoryIndicates whether the device supports relative addressing (not applicable to logical devices).
1.3.6.1.4.1.1597.1.4.1.1.22ColumndptScsiDevSMARTread-onlymandatoryIndicates whether the device supports SMART specifications (not applicable to logical devices).
1.3.6.1.4.1.1597.1.4.1.1.23ColumndptScsiDevSCAMread-onlydeprecatedIndicates whether the device supports SCAM.
1.3.6.1.4.1.1597.1.4.1.1.24ColumndptScsiDevBadBlockNumberread-onlymandatoryIf bad blocks have been detected on the device, this is the address of the most recent one. Otherwise it will contain 0 (no error). The first valid block start…
1.3.6.1.4.1.1597.1.4.1.1.25ColumndptScsiDevBadBlockCountread-onlymandatoryThis represents the total number of the bad blocks encountered most recently on the device starting at the block number dptScsiDevBadBlockNumber. This object i…
1.3.6.1.4.1.1597.1.4.1.1.26ColumndptScsiDevErrorsAboveThresholdread-onlydeprecatedIndicates whether or not the error count of the device has reached the threshold. This value is no longer supported.
1.3.6.1.4.1.1597.1.4.1.1.27ColumndptScsiDevDriveLockingOnread-onlydeprecatedIndicates whether or not the drive is locked. This value is no longer supported.
1.3.6.1.4.1.1597.1.4.1.1.28ColumndptScsiDevLastReqSenseInforead-onlymandatoryDevice Request Sense information. It is used in the definition of one or more traps.
1.3.6.1.4.1.1597.1.4.1.1.29ColumndptScsiDevReadCachingOnread-onlydeprecatedIndicates whether or not read caching is on. This value is not applicable to SmartRAID V and later controllers.
1.3.6.1.4.1.1597.1.4.1.1.30ColumndptScsiDevReadCacheMaxRecordread-onlydeprecatedMaximum record size for read caching. This value is not applicable to SmartRAID V and later controllers. For these controllers, this value will be 0.
1.3.6.1.4.1.1597.1.4.1.1.31ColumndptScsiDevWriteCachingOnread-onlydeprecatedIndicates whether or not write caching is on. This value is not applicable to SmartRAID V and later controllers.
1.3.6.1.4.1.1597.1.4.1.1.32ColumndptScsiDevWriteCacheMaxRecordread-onlydeprecatedMaximum record size for write caching. This value is not applicable to SmartRAID V and later controllers. For these controllers, this value will be 0.
1.3.6.1.4.1.1597.1.4.1.1.33ColumndptScsiDevWriteModeread-onlymandatoryThe write modes are Write-back and Write-through, with write-back being the default. In write-back mode the controller will cache the data and return completio…
1.3.6.1.4.1.1597.1.4.1.1.34ColumndptScsiDevSmartStatusOkread-onlymandatoryIndicates whether the device has reported a SMART error not (not applicable to logical devices).
1.3.6.1.4.1.1597.1.4.1.1.35ColumndptScsiDevTyperead-onlymandatoryType of device reported.
1.3.6.1.4.1.1597.1.5NodedptScsiArr
1.3.6.1.4.1.1597.1.5.1TabledptScsiArrTablenot-accessiblemandatoryA list of RAID array groups.
1.3.6.1.4.1.1597.1.5.1.1RowdptScsiArrEntrynot-accessiblemandatoryThese parameters describe/control a RAID array group.
1.3.6.1.4.1.1597.1.5.1.1.1ColumndptScsiArrTyperead-onlymandatoryThe RAID type for the Logical Drive. RAID Disk-fault No.of Level Tolerant Drives RAID-0 No 2 or more RAID-1 Yes Even number RAID-5 Yes 3 or more Hot Spare - on…
1.3.6.1.4.1.1597.1.5.1.1.2ColumndptScsiArrOwnerread-onlymandatorysoftware entity that created this logical device.
1.3.6.1.4.1.1597.1.5.1.1.3ColumndptScsiArrNameread-onlymandatoryName of the RAID array group.
1.3.6.1.4.1.1597.1.5.1.1.4ColumndptScsiArrBackgroundProgressread-onlymandatoryPercentage of completion of an outstanding background operation, e.g., array Build, Rebuild or Verify. If there is no current background process, the value is …
1.3.6.1.4.1.1597.1.5.1.1.5ColumndptScsiArrEntryStatusread-onlymandatory- 'active': indicates that the table row is available for use by the managed device; - 'notInService': indicates that the table row exists in the agent, but is…
1.3.6.1.4.1.1597.1.5.2TabledptScsiArrMemberTablenot-accessiblemandatoryA list of mappings between an array device and its components.
1.3.6.1.4.1.1597.1.5.2.1RowdptScsiArrMemberEntrynot-accessiblemandatoryThese parameters describe/control the mappings between an array and its components. In the index clause, the first set of indices from dptScsiHbaNumber to dptS…
1.3.6.1.4.1.1597.1.5.2.1.1ColumndptScsiArrMemberStripeSizeread-onlymandatoryThe stripe size used by the array (in KB). A stripe is a contiguous region for data storage on a disk. Data is distributed evenly across component drives in an…
1.3.6.1.4.1.1597.1.5.2.1.2ColumndptScsiArrMemberEntryStatusread-onlymandatoryTo create a new row, manager sets this object to createAndWait. After successful creation of a row in the agent, it is set to notInService until the parent arr…
1.3.6.1.4.1.1597.1.6NodedptScsiStats
1.3.6.1.4.1.1597.1.6.1TabledptScsiStatsHbaTablenot-accessiblemandatoryA list of controller statistics.
1.3.6.1.4.1.1597.1.6.1.1RowdptScsiStatsHbaEntrynot-accessiblemandatoryThese parameters describe the statistics of an controller.
1.3.6.1.4.1.1597.1.6.1.1.1ColumndptScsiStatsHbaCacheTotalPagesread-onlymandatoryIndicates the maximum number of data pages that can be cached on the controller. A page is the smallest region of cache that can be allocated to store data. Ea…
1.3.6.1.4.1.1597.1.6.1.1.2ColumndptScsiStatsHbaCacheUsedPagesread-onlymandatoryIndicates the number of data pages residing in the cache memory. This has the same value as dptHbaCacheTotalPages when the cache is full.
1.3.6.1.4.1.1597.1.6.1.1.3ColumndptScsiStatsHbaCacheDirtyPagesread-onlymandatoryIndicates the number of cache pages that contain dirty data. Dirty data is the data which has been written to the adapter by the computer but has not yet been …
1.3.6.1.4.1.1597.1.6.1.1.4ColumndptScsiStatsHbaCacheReadAheadPagesread-onlymandatoryIndicates the number of cache pages that contain read-ahead data. Read-ahead data is read from the drives in anticipation of a future access.
1.3.6.1.4.1.1597.1.6.1.1.5ColumndptScsiStatsHbaCacheLockedPagesread-onlymandatoryIndicates the number of data pages residing in the cache memory that are presently locked. These data pages do not get paged out until the locks are released.
1.3.6.1.4.1.1597.1.6.1.1.6ColumndptScsiStatsHbaCacheEccFaultPagesread-onlymandatoryThe number of cache pages that have had Error Correcting Code (ECC) fault and had been reassigned since power up. ECC is a method of generating redundant infor…
1.3.6.1.4.1.1597.1.6.1.1.7ColumndptScsiStatsHbaCommandsread-onlymandatoryThe number of commands received by the controller since power up.
1.3.6.1.4.1.1597.1.6.1.1.8ColumndptScsiStatsHbaMisAlignedTransfersread-onlymandatoryThe number of misaligned data transfers handled by the controller since power up. In a misaligned data transfer, data is accessed on odd byte boundary. These t…
1.3.6.1.4.1.1597.1.6.1.1.9ColumndptScsiStatsHbaScsiResetsread-onlymandatoryThe number of SCSI reset commands received by the adapter since power up.
1.3.6.1.4.1.1597.1.6.2TabledptScsiStatsDevTablenot-accessiblemandatoryA list of Device statistics.
1.3.6.1.4.1.1597.1.6.2.1RowdptScsiStatsDevEntrynot-accessiblemandatoryThese parameters describe the statistics of a device. The index of this entry is the logical device address of the device. The logical device address consists …
1.3.6.1.4.1.1597.1.6.2.1.1ColumndptScsiStatsDevReadTotalSectorsread-onlymandatoryThe number of sectors read from the device since power up.
1.3.6.1.4.1.1597.1.6.2.1.2ColumndptScsiStatsDevReadCacheHitsread-onlymandatoryThe number of data accesses since power up in which the requested data was found in the cache.
1.3.6.1.4.1.1597.1.6.2.1.3ColumndptScsiStatsDevReadAheadHitsread-onlymandatoryThe number of data accesses since power up in which the requested data was found in the read ahead buffer.
1.3.6.1.4.1.1597.1.6.2.1.4ColumndptScsiStatsDevWriteTotalSectorsread-onlymandatoryThe number of sectors written to the device since power up.
1.3.6.1.4.1.1597.1.6.2.1.5ColumndptScsiStatsDevWriteCacheHitsread-onlymandatoryThe number of data writes, since power up, targeted to the device in which the data was written to the cache and not to the disk.
1.3.6.1.4.1.1597.1.6.2.1.6ColumndptScsiStatsDevWriteBacksread-onlymandatoryThe number of data writes to the device since power up in which the data was written from the cache to the disk at a time when the device would otherwise be id…
1.3.6.1.4.1.1597.1.6.2.1.7ColumndptScsiStatsDevStripesCrossedsread-onlymandatoryThe number of array group accesses that cross stripe boundaries since power up. Only applicable in case of array devices; in other cases, it contains zero.
1.3.6.1.4.1.1597.1.6.3TabledptScsiStatsDevRWCmdsTablenot-accessiblemandatoryA statistical breakdown of read and write commands.
1.3.6.1.4.1.1597.1.6.3.1RowdptScsiStatsDevRWCmdsEntrynot-accessiblemandatoryThese parameters describe the statistics of a device. The index is the logical device address of the device. The logical device address consists of: contoller …
1.3.6.1.4.1.1597.1.6.3.1.1ColumndptScsiStatsDevRWCmdsTyperead-onlymandatoryIndicates whether this row represents statistics related to the commands sent by the O/S of the host computer or the SCSI commands sent by the controller to th…
1.3.6.1.4.1.1597.1.6.3.1.2ColumndptScsiStatsDevRead1Ksread-onlymandatoryThe number of ScsiDev Group read operations of length <= 1K.
1.3.6.1.4.1.1597.1.6.3.1.3ColumndptScsiStatsDevRead2Ksread-onlymandatoryThe number of ScsiDev Group read operations of length > 1K & <= 2K.
1.3.6.1.4.1.1597.1.6.3.1.4ColumndptScsiStatsDevRead4Ksread-onlymandatoryThe number of ScsiDev Group read operations of length > 2K & <= 4K.
1.3.6.1.4.1.1597.1.6.3.1.5ColumndptScsiStatsDevRead8Ksread-onlymandatoryThe number of ScsiDev Group read operations of length > 4K & <= 8K.
1.3.6.1.4.1.1597.1.6.3.1.6ColumndptScsiStatsDevRead16Ksread-onlymandatoryThe number of ScsiDev Group read operations of length > 8K <= 16K.
1.3.6.1.4.1.1597.1.6.3.1.7ColumndptScsiStatsDevRead32Ksread-onlymandatoryThe number of ScsiDev Group read operations of length > 16K & <= 32K.
1.3.6.1.4.1.1597.1.6.3.1.8ColumndptScsiStatsDevRead64Ksread-onlymandatoryThe number of ScsiDev Group read operations of length > 32K & <= 64k.
1.3.6.1.4.1.1597.1.6.3.1.9ColumndptScsiStatsDevRead128Ksread-onlymandatoryThe number of ScsiDev Group read operations of length > 64K & <= 128K.
1.3.6.1.4.1.1597.1.6.3.1.10ColumndptScsiStatsDevRead256Ksread-onlymandatoryThe number of ScsiDev Group read operations of length > 128K & <= 256K.
1.3.6.1.4.1.1597.1.6.3.1.11ColumndptScsiStatsDevRead512Ksread-onlymandatoryThe number of ScsiDev Group read operations of length > 256K & <= 512K.
1.3.6.1.4.1.1597.1.6.3.1.12ColumndptScsiStatsDevRead1MBsread-onlymandatoryThe number of ScsiDev Group read operations of length > 512K & <= 1M.
1.3.6.1.4.1.1597.1.6.3.1.13ColumndptScsiStatsDevReadGreater1MBsread-onlymandatoryThe number of ScsiDev Group read operations of length > 1M.
1.3.6.1.4.1.1597.1.6.3.1.14ColumndptScsiStatsDevWrite1Ksread-onlymandatoryThe number of ScsiDev Group write operations of length <= 1K.
1.3.6.1.4.1.1597.1.6.3.1.15ColumndptScsiStatsDevWrite2Ksread-onlymandatoryThe number of ScsiDev Group write operations of length > 1K & <= 2K.
1.3.6.1.4.1.1597.1.6.3.1.16ColumndptScsiStatsDevWrite4Ksread-onlymandatoryThe number of ScsiDev Group write operations of length > 2K & <= 4K.
1.3.6.1.4.1.1597.1.6.3.1.17ColumndptScsiStatsDevWrite8Ksread-onlymandatoryThe number of ScsiDev Group write operations of length > 4k & <= 8K.
1.3.6.1.4.1.1597.1.6.3.1.18ColumndptScsiStatsDevWrite16Ksread-onlymandatoryThe number of ScsiDev Group write operations of length > 8K & <= 16K.
1.3.6.1.4.1.1597.1.6.3.1.19ColumndptScsiStatsDevWrite32Ksread-onlymandatoryThe number of ScsiDev Group write operations of length > 16K & <= 32K.
1.3.6.1.4.1.1597.1.6.3.1.20ColumndptScsiStatsDevWrite64Ksread-onlymandatoryThe number of ScsiDev Group write operations of length > 32K & <= 64K.
1.3.6.1.4.1.1597.1.6.3.1.21ColumndptScsiStatsDevWrite128Ksread-onlymandatoryThe number of ScsiDev Group write operations of length > 64K & <= 128K.
1.3.6.1.4.1.1597.1.6.3.1.22ColumndptScsiStatsDevWrite256Ksread-onlymandatoryThe number of ScsiDev Group write operations of length > 128K & <= 256K.
1.3.6.1.4.1.1597.1.6.3.1.23ColumndptScsiStatsDevWrite512Ksread-onlymandatoryThe number of ScsiDev Group write operations of length > 256K & <= 512K.
1.3.6.1.4.1.1597.1.6.3.1.24ColumndptScsiStatsDevWrite1MBsread-onlymandatoryThe number of ScsiDev Group write operations of length > 512K & <= 1M.
1.3.6.1.4.1.1597.1.6.3.1.25ColumndptScsiStatsDevWriteGreater1MBsread-onlymandatoryThe number of ScsiDev Group write operations of length > 1M.
1.3.6.1.4.1.1597.1.7NodedptScsiEvent
1.3.6.1.4.1.1597.1.7.1ScalardptScsiEventInforead-onlymandatoryRepresents information in a human readable form (English string) for generic DPT SCSI system traps.
1.3.6.1.4.1.1597.1.7.2ScalardptScsiEventAuxVoltagenot-accessiblemandatoryAuxiliary voltage status reported by the controller.
1.3.6.1.4.1.1597.1.8NodedptScsiDummy
1.3.6.1.4.1.1597.1.8.1ScalardptScsiHbaNumberMembernot-accessiblemandatoryAn index that uniquely identifies a row in the dptHbaTable table that pertain to a particular HBA. The value of this object is the logical device identifier fo…
1.3.6.1.4.1.1597.1.8.2ScalardptScsiBusNumberMembernot-accessiblemandatoryAn index that, along with dptScsHbaNumber uniquely, identifies an entry in the dptScsiBusTable for a particular SCSI Bus.
1.3.6.1.4.1.1597.1.8.3ScalardptScsiDevIdMembernot-accessiblemandatoryThe SCSI Id of the device.
1.3.6.1.4.1.1597.1.8.4ScalardptScsiDevLunMembernot-accessiblemandatoryThe SCSI logical unit number of the device.
1.3.6.1.4.1.1597.1.8.5ScalardptScsiDevLevelMembernot-accessiblemandatoryIndicates whether the device is a physical device (level 0) or a logical device (level 1, level 2, etc). It also gives its level in the containment hierarchy o…
1.3.6.1.4.1.1597.14NodedptOtherTrapController event generated with a value dptScsiEventInfo.
1.3.6.1.4.1.1597.100NodedptHbaVoltageNormalTrap5V Voltage has returned to the normal range.
1.3.6.1.4.1.1597.101NodedptHbaTemperatureNormalTrapTemperature on controller has returned to normal range.
1.3.6.1.4.1.1597.102NodedptHbaEccRAMErrorNotFoundTrapController detected an ECC RAM Error but an ECC error was not found when correction was attempted.
1.3.6.1.4.1.1597.103NodedptDevStatusChangedTrapStatus of the device changed.
1.3.6.1.4.1.1597.104NodedptDevReqSenseTrapRequest sense information received from controller.
1.3.6.1.4.1.1597.105NodedptArrayChangeTrapThe software has asked the FW to do an array change.
1.3.6.1.4.1.1597.106NodedptBatteryChangeTrapThe status of the recharchable battery has changed.
1.3.6.1.4.1.1597.107NodedptHbaAuxVoltageNormalTrapAn auxiliary voltage has returned to the normal range.
1.3.6.1.4.1.1597.200NodedptHbaEccRAMErrorCorrectedTrapThe controller detected and corrected an ECC RAM error. dptScsiHbaBadMemoryAddress contains the RAM address.
1.3.6.1.4.1.1597.201NodedptDevBlockReassignedTrapController reassigned a block. dptScsiDevBadBlockNumber contains the reassigned block number.
1.3.6.1.4.1.1597.202NodedptDevReqSenseErrorTrapWarning: request sense information from controller.
1.3.6.1.4.1.1597.300NodedptHbaVoltageChangeTrapController detected 5V voltage is outside of the normal range.
1.3.6.1.4.1.1597.301NodedptHbaTemperatureHighTrapHigh temperature detected on controller.
1.3.6.1.4.1.1597.302NodedptHbaEccRAMErrorUncorrectableTrapThe controller detected and uncorrectable ECC RAM error. dptScsiHbaBadMemoryAddress contains the RAM address.
1.3.6.1.4.1.1597.303NodedptArrayStatusChangeDegradedTrapArray Degraded due to drive failure.
1.3.6.1.4.1.1597.304NodedptDevReqSenseSeriousErrorTrapSerious: request sense information from controller.
1.3.6.1.4.1.1597.305NodedptDevArrayDataInconsistencyTrapArray Data consistency error detected on controller.
1.3.6.1.4.1.1597.306NodedptHbaErrorTrapThe controller has detected a non-SCSI related error, as defined in the I2O spec.
1.3.6.1.4.1.1597.307NodedptDevFailedTrapAn unprotected drive has failed (visible to the OS).
1.3.6.1.4.1.1597.308NodedptDevSmartFailedTrapA drive has reported a SMART failure.
1.3.6.1.4.1.1597.309NodedptHbaAuxVoltageChangeTrapController detected an auxiliary voltage is outside of the normal range.
1.3.6.1.4.1.1597.400NodedptHbaTemperatureVeryHighTrapVery high temperature detected on controller.
1.3.6.1.4.1.1597.401NodedptArrayStatusChangeFailedTrapArray Failed due to multiple drive failures.
Type Definitions
NameSyntaxStatusDescription
BatteryBackupModuleINTEGER { invalid(1), notApplicable(2), none(3), embedded(4), bb4050(5), bb4060(6) }
BatteryStatusINTEGER { invalid(1), notApplicable(2), none(3), trickleCharge(4), fastCharge(5), discharge(6), bad(7), full(8), initCharge(9), initDischarge(10), initRecharge(11), maintenanceDischarge(12), maintenanceCharge(13) }
BusTerminationTypeINTEGER { invalid(1), on(2), off(3), highOnly(4), auto(5) }
BusWidthINTEGER { invalid(1), serial(2), narrow(3), wide(4), wide32(5), notApplicable(6) }
CachingModuleINTEGER { invalid(1), notApplicable(2), none(3), cm4000(4), rc4040(5), rc4041(6), embedded(7), ra4050(8), ra4060(9) }
CommandTypeINTEGER { hostCmd(1), scsiCmd(2) }
DeviceStatusINTEGER { invalid(1), optimal(2), verifying(3), failed(4), warning(5), formatting(6), formatCertifying(7), missing(8), notCreated(9), degraded(10), building(11), rebuilding(12), verifyFixing(13), abortActivity(14) }
DeviceTypeINTEGER { disk(1), tape(2), printer(3), processor(4), writeOnce(5), cdRom(6), scanner(7), optical(8), jukebox(9), commDev(10), graphicsType10(11), graphicsType11(12), scc(13), ses(14), saf-te(97), host(98), unknown(99) }
DeviceWriteModeINTEGER { invalid(1), notApplicable(2), writeBack(3), writeThrough(4), noCache(5) }
DisplayStringOCTET STRING
DrqNumberINTEGER { invalid(1), notApplicable(2), zero(3), five(4), six(5), seven(6) }
HbaGenStatusINTEGER { invalid(1), notSupported(2), ok(3), fail(4), error(5) }
HostBusTypeINTEGER { invalid(1), isa(2), eisa(3), pci-32(4), pci-64(5) }
IrqTypeINTEGER { invalid(1), level(2), edge(3) }
LowHighStatusINTEGER { invalid(1), notApplicable(2), notSupported(3), low(4), normal(5), high(6), veryHigh(7) }
MemoryBankSizeINTEGER { invalid(1), notApplicable(2), empty(3), oneMB(4), fourMB(5), sixteenMB(6), thirtytwoMB(7), sixtyfourMB(8), hundredtwentyeightMB(9), twohundredfiftysixMB(10), fivehundredtwelveMB(11), thousandtwentyfourMB(12) }
MemoryBankTypeINTEGER { invalid(1), notApplicable(2), empty(3), standard-SIMM(4), standard-DIMM(5), sm4000DPT-ECC-SIMM(6), sm4041DPT-ECC-DIMM(7), sm4050DPT-ECC-EDO-SIMM(8), dm4050DPT-ECC-EDO-SO-DIMM(9), dm4070DPT-ECC-SD-DIMM(10) }
RaidModuleINTEGER { invalid(1), notApplicable(2), none(3), dm4000(4), rc4040(5), rc4041(6), embedded(7), ra4050(8), ra4060(9) }
RaidTypeINTEGER { invalid(1), notAssigned(2), raid-0(3), raid-1(4), raid-5(5), redirected(6), hotSpare(7) }
RowStatusINTEGER { invalid(1), active(2), notInService(3), notReady(4), createAndGo(5), createAndWait(6), destroy(7) }
ScsiBusTypeINTEGER { invalid(1), singleEnded(2), differential(3), lvd(4), fibreChannel(5) }
ScsiVersionINTEGER { invalid(1), scsi-I(2), scsi-II(3), scsi-III(4) }
SoftwareTypeINTEGER { firmware(1), driver(2), operatingSystem(3), application(4) }
YesNoStatusINTEGER { invalid(1), notApplicable(2), notSupported(3), yes(4), no(5) }