DT1-MIB
52 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.429 | Nodeusr | |||
| 1.3.6.1.4.1.429.1 | Nodenas | |||
| 1.3.6.1.4.1.429.1.3 | Nodedt1 | |||
| 1.3.6.1.4.1.429.1.3.1 | Nodedt1Id | |||
| 1.3.6.1.4.1.429.1.3.1.1 | Tabledt1IdTable | not-accessible | mandatory | A table that contains information that identifies the hardware and software that make up the specified dual T1 card. |
| 1.3.6.1.4.1.429.1.3.1.1.1 | Rowdt1IdEntry | not-accessible | mandatory | There is one entry in this table for every dual T1 card in the chassis. |
| 1.3.6.1.4.1.429.1.3.1.1.1.1 | Columndt1IdIndex | read-only | mandatory | An index that uniquely identifies the dual T1 card for which this row in the table pertains. The value of this index matches the value of the index for the cor… |
| 1.3.6.1.4.1.429.1.3.1.1.1.2 | Columndt1IdHardwareSerNum | read-only | mandatory | The dual T1 card's hardware serial number as stored in EEPROM. |
| 1.3.6.1.4.1.429.1.3.1.1.1.3 | Columndt1IdHardwareRev | read-only | mandatory | The hardware revision of the specified dual T1 card as stored in its EEPROM. |
| 1.3.6.1.4.1.429.1.3.1.1.1.4 | Columndt1IdSoftwareRev | read-only | mandatory | The revision of the software being executed in the specified dual T1 card. |
| 1.3.6.1.4.1.429.1.3.2 | Nodedt1Cfg | |||
| 1.3.6.1.4.1.429.1.3.2.1 | Tabledt1CfgTable | not-accessible | mandatory | The Dual T1 Card Configuration Table contains an entry for each of the manageable Dual T1 Cards in the chassis. It contains objects that reflect the current co… |
| 1.3.6.1.4.1.429.1.3.2.1.1 | Rowdt1CfgEntry | not-accessible | mandatory | There is one Dual T1 Card Configuration table entry per Dual T1 Card in the chassis. |
| 1.3.6.1.4.1.429.1.3.2.1.1.1 | Columndt1CfgIndex | read-only | mandatory | A unique value for each Dual T1 Card in the chassis. The value of dt1CfgIndex matches the value of the index for the corresponding Dual T1 Card entity in the e… |
| 1.3.6.1.4.1.429.1.3.2.1.1.2 | Columndt1CfgSpanATmgSrcPrio | read-write | mandatory | Identifies the priority at which the clock recovered from span line A is to be used as this Dual T1 Card's transmit timing source. |
| 1.3.6.1.4.1.429.1.3.2.1.1.3 | Columndt1CfgSpanBTmgSrcPrio | read-write | mandatory | Identifies the priority at which the clock recovered from span line B is to be used as this Dual T1 Card's transmit timing source. |
| 1.3.6.1.4.1.429.1.3.2.1.1.4 | Columndt1CfgInternTmgSrcPrio | read-write | mandatory | Identifies the priority at which this Dual T1 Card's internal clock is to be used as the transmit timing source. |
| 1.3.6.1.4.1.429.1.3.2.1.1.5 | Columndt1CfgTdmBusTmgSrcPrio | read-only | deprecated | Identifies the priority at which the clock currently on the TDM bus is to be used as this Dual T1 Card's transmit timing source. |
| 1.3.6.1.4.1.429.1.3.2.1.1.6 | Columndt1CfgIdleDiscPatt | read-write | mandatory | Idle disconnect pattern sent to the modems. Normal values: USA = 1, international = 84. Default = 1. Configure the modems identically. Consult the help screen,… |
| 1.3.6.1.4.1.429.1.3.2.1.1.7 | Columndt1CfgNumT1TypeNacs | read-write | mandatory | The number of T1 and/or T1/E1-PRI NACs in the chassis. Default=multiple(3). |
| 1.3.6.1.4.1.429.1.3.2.1.1.8 | Columndt1CfgCallEventFilter | read-write | mandatory | This objects provides a means to filter the types of call event traps generated. It specifies the class of calls to filter out. Default = filterOutSuccess(4). |
| 1.3.6.1.4.1.429.1.3.2.1.1.9 | Columndt1CfgSetDs0OutofService | read-write | mandatory | This object determines to put DS0s out of service upon removal Quad Modem NAC when fixed modem routing method is engaged. Default = disable(2). |
| 1.3.6.1.4.1.429.1.3.2.1.1.10 | Columndt1CfgWirelessMode | read-write | mandatory | This object will configure the wireless mode of operations of the T1 at power up. Default = normal(1). |
| 1.3.6.1.4.1.429.1.3.3 | Nodedt1Stat | |||
| 1.3.6.1.4.1.429.1.3.3.1 | Tabledt1StatTable | not-accessible | mandatory | The Dual T1 Card Status table contains an entry for each of the manageable Dual T1 Cards in the chassis. It contains objects that reflect the current card spec… |
| 1.3.6.1.4.1.429.1.3.3.1.1 | Rowdt1StatEntry | not-accessible | mandatory | There is one Dual T1 Card Status entry per Dual T1 Card in the chassis. |
| 1.3.6.1.4.1.429.1.3.3.1.1.1 | Columndt1StatIndex | read-only | mandatory | A unique value for each Dual T1 Card in the chassis. The value of dt1StatusIndex matches the value of the index for the corresponding Dual T1 Card's entry in t… |
| 1.3.6.1.4.1.429.1.3.3.1.1.2 | Columndt1StatCurrentTmgSrc | read-only | mandatory | Based on the availability of the various timing sources and the current settings of the priorities at which they are to be used, the Dual T1 Card will select t… |
| 1.3.6.1.4.1.429.1.3.3.1.1.3 | Columndt1StatSelfTest | read-only | mandatory | This object contains the result of the last self test command requested from the command table. It includes both destructive and non destructive results. |
| 1.3.6.1.4.1.429.1.3.3.1.1.4 | Columndt1StatUpTime | read-only | mandatory | This object contains the uptime of the NAC |
| 1.3.6.1.4.1.429.1.3.3.1.1.5 | Columndt1StatCallEventCode | read-only | mandatory | This object contains the definition of the call event codes sent in the call event trap. |
| 1.3.6.1.4.1.429.1.3.3.1.1.6 | Columndt1StatCallEventQ931Value | read-only | mandatory | This object contains the Q931 Call Reference Value sent in the call event trap. |
| 1.3.6.1.4.1.429.1.3.4 | Nodedt1Cmd | |||
| 1.3.6.1.4.1.429.1.3.4.1 | Tabledt1CmdTable | not-accessible | mandatory | The Dual T1 Card Command table contains an entry for each of the manageable Dual T1 Cards in the chassis. It provides a means through which to take specific ac… |
| 1.3.6.1.4.1.429.1.3.4.1.1 | Rowdt1CmdEntry | not-accessible | mandatory | There is one Dual T1 Card Command entry per Dual T1 Card in the chassis. |
| 1.3.6.1.4.1.429.1.3.4.1.1.1 | Columndt1CmdIndex | read-only | mandatory | A unique value for each Dual T1 Card in the chassis. The value of this object matches the value of the index of the corresponding Dual T1 Card's entry in the e… |
| 1.3.6.1.4.1.429.1.3.4.1.1.2 | Columndt1CmdMgtStationId | read-write | mandatory | This object is a generic read-write variable that a Management Station (MS) can use to guarantee that the results from a given command are the results of a com… |
| 1.3.6.1.4.1.429.1.3.4.1.1.3 | Columndt1CmdReqId | read-only | mandatory | This object contains the value of the request-id field in the SNMP PDU which invoked the current or most recent command or test on this Dual T1 Card. If the re… |
| 1.3.6.1.4.1.429.1.3.4.1.1.4 | Columndt1CmdFunction | read-write | mandatory | This object contains a value which describes the command which is being invoked. |
| 1.3.6.1.4.1.429.1.3.4.1.1.5 | Columndt1CmdForce | read-write | mandatory | In some cases, the Dual T1 Card may be in a state such that certain commands could adversely affect connections. In such cases, a command request with this obj… |
| 1.3.6.1.4.1.429.1.3.4.1.1.6 | Columndt1CmdParam | read-write | mandatory | This object contains parameters that are specific to the particular command being issued. In some cases, there will be no aditional parameters required. |
| 1.3.6.1.4.1.429.1.3.4.1.1.7 | Columndt1CmdResult | read-only | mandatory | This object contains the result of the most recently requested command or test, or the value none(1) if no commands have been requested since the last reset. |
| 1.3.6.1.4.1.429.1.3.4.1.1.8 | Columndt1CmdCode | read-only | mandatory | The value of this object upon command completion indicates a further description of what went wrong if the command was unsuccessful. In the case of tests, a bi… |
| 1.3.6.1.4.1.429.1.3.5 | Tabledt1TrapEnaTable | not-accessible | mandatory | Table containing objects to enable traps on the Dual T1 Cards in the chassis. |
| 1.3.6.1.4.1.429.1.3.5.1 | Rowdt1TrapEnaEntry | not-accessible | mandatory | There is one entry for each Dual T1 Card in the chassis. |
| 1.3.6.1.4.1.429.1.3.5.1.1 | Columndt1TrapEnaIndex | read-only | mandatory | A unique index identifying the Dual T1 Card to which the trap enable objects pertain. |
| 1.3.6.1.4.1.429.1.3.5.1.2 | Columndt1TrapEnaTxTmgSrcSwitch | read-write | mandatory | An object which enables the SNMP proxy agent to generate a trap upon detection of the Dual T1 Card switching to an alternate transmit timing source. Default = … |
| 1.3.6.1.4.1.429.1.3.5.1.3 | Columndt1TrapEnaCallEvent | read-write | mandatory | This object enables the generation of an SNMP trap to track calls entering and exiting the NAC. Default = disableAll(2). |
| 1.3.6.1.4.1.429.1.3.5.1.4 | Columndt1TrapEnaCallArriveEvent | read-write | mandatory | This object enables the generation of an SNMP trap to track call arrivals the NAC. Default = disableAll(2). |
| 1.3.6.1.4.1.429.1.3.5.1.5 | Columndt1TrapEnaCallConnEvent | read-write | mandatory | This object enables the generation of an SNMP trap to track call connects. Default = disableAll(2). |
| 1.3.6.1.4.1.429.1.3.5.1.6 | Columndt1TrapEnaCallTermEvent | read-write | mandatory | This object enables the generation of an SNMP trap to track normal call terminations. Default = disableAll(2). |
| 1.3.6.1.4.1.429.1.3.5.1.7 | Columndt1TrapEnaCallFailEvent | read-write | mandatory | This object enables the generation of an SNMP trap to track failed call terminations. Default = disableAll(2). |