DVB-CABLE-NIU-MIB
152 objects
The MIB modules for NIUs that conform to the EuroModem specification. This MIB assumes the NIU implements MIB-II RFC 1213
Imported Objects
| IF-MIB | ifIndex InterfaceIndex InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 experimental Integer32 OBJECT-TYPE Unsigned32 Valentine Expires August 2001 9 DVB Cable Network Interface Unit MIB February 2001 MODULE-IDENTITY |
| SNMPv2-TC | DateAndTime RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.3.110 | NodedvbDevice | |||
| 1.3.6.1.3.110.1 | IdentitydvbNiu | The MIB modules for NIUs that conform to the EuroModem specification. This MIB assumes the NIU implements MIB-II RFC 1213 | ||
| 1.3.6.1.3.110.1.1 | NodedvbNiuMIBobjects | |||
| 1.3.6.1.3.110.1.1.1 | NodedvbNiuSystem | |||
| 1.3.6.1.3.110.1.1.1.1 | ScalardvbNiuMibVersion | read-only | current | The MIB version number. |
| 1.3.6.1.3.110.1.1.1.2 | ScalardvbNiuSerialNum | read-only | current | This is the serial number of the equipment. It should identify the manufacturer, model and revsion of the equiment |
| 1.3.6.1.3.110.1.1.1.3 | ScalardvbNiuResetNow | read-write | current | When this object is set to resetNow it will cause a hardware reset followed by sign on. When read this object returns ready. |
| 1.3.6.1.3.110.1.1.1.4 | ScalardvbNiuResetCounts | read-only | current | This counts the number of system resets since last power on. |
| 1.3.6.1.3.110.1.1.1.5 | ScalardvbNiuDateAndTime | read-write | current | The date and time. See RFC1903 |
| 1.3.6.1.3.110.1.1.1.6 | ScalardvbNiuOperStatus | read-only | current | The operational status of the NIU. provisioning - The NIU is currently provisioning. running - The NIU has at least one operating connection. stopped - The NIU… |
| 1.3.6.1.3.110.1.1.1.7 | ScalardvbNiuModemtype | read-only | current | The EuroModem class to which the NIU belongs as specified in ECCA EuroModem Specification version 1.0 |
| 1.3.6.1.3.110.1.1.1.8 | TabledvbNiuStaticIpTable | not-accessible | current | This table is used to assign static IP addresses to NIU interfaces. It needs to be used with care! DHCP/BOOTP assigned addresses overide entries in this table.… |
| 1.3.6.1.3.110.1.1.1.8.1 | RowdvbNiuStaticIpEntry | not-accessible | current | A row can only be created if there is a corresponding row in ifTable. The IP address to be assigned must be unique within the NIU for the address type. The int… |
| 1.3.6.1.3.110.1.1.1.8.1.1 | ColumndvbNiuStaticIpAddrType | not-accessible | current | The type of IP address assigned to the interface. |
| 1.3.6.1.3.110.1.1.1.8.1.2 | ColumndvbNiuStaticIpAddr | not-accessible | current | The IP address assigned to the interface. |
| 1.3.6.1.3.110.1.1.1.8.1.3 | ColumndvbNiuStaticIpMaskType | read-create | current | The type of IP address expressed by the mask. |
| 1.3.6.1.3.110.1.1.1.8.1.4 | ColumndvbNiuStaticIpMask | read-create | current | The IP subnet mask for the interface. |
| 1.3.6.1.3.110.1.1.1.8.1.5 | ColumndvbNiuStaticIpStatus | read-create | current | This controls and reflects the status of the row. Valentine Expires August 2001 15 DVB Cable Network Interface Unit MIB February 2001 Rows can be created by us… |
| 1.3.6.1.3.110.1.1.1.10 | ScalardvbNiuConfigSet | read-write | current | This object is used to manage the configuration of the NIU. The following can be used to set the object. storeConfig - stores the current configuration to non … |
| 1.3.6.1.3.110.1.1.1.11 | ScalardvbNiuEuroloader | read-only | current | Enables and disables the EuroLoader. |
| 1.3.6.1.3.110.1.1.1.12 | ScalardvbNiuImplSet | read-only | current | This object when read identifies which optional groups have been implemented. Implemented groups have their bit set. The bits represent the following: dhcp - d… |
| 1.3.6.1.3.110.1.1.1.13 | ScalardvbNiuMulticast | read-write | current | This object is used to restrict the level of multicast support provided by the NIU. disabled - No IGMP or multicast packets are forwarded through the NIU in ei… |
| 1.3.6.1.3.110.1.1.2 | NodedvbNiuSoftware | |||
| 1.3.6.1.3.110.1.1.2.1 | TabledvbNiuSwVerTable | not-accessible | current | This table is used to check the versions of software stored in the NIU. It is also used to configure which/when versions of software is executed. |
| 1.3.6.1.3.110.1.1.2.1.1 | RowdvbNiuSwVerEntry | not-accessible | current | |
| 1.3.6.1.3.110.1.1.2.1.1.1 | ColumndvbNiuSwSlot | not-accessible | current | The slot number the software image is held in. Slot 0 is reserved for RAM, it is used to identify an image directly loaded into RAM e.g. for debug purposes. Th… |
| 1.3.6.1.3.110.1.1.2.1.1.2 | ColumndvbNiuSwVersion | read-only | current | The version of the software located in the slot. This is a manufacturer dependant string. |
| 1.3.6.1.3.110.1.1.2.1.1.3 | ColumndvbNiuSwState | read-only | current | The execution state of the software in the slot. If the s/w is currently executing the state will be executing(1). If the s/w tried to execute but failed it wi… |
| 1.3.6.1.3.110.1.1.2.1.1.4 | ColumndvbNiuSwAction | read-write | current | When the NIU is initialising, this identifies which s/w image should be used. boot - identifies that this s/w should be used at initialisation. There must be o… |
| 1.3.6.1.3.110.1.1.2.1.1.5 | ColumndvbNiuSwDateTime | read-only | current | The date and time the image was downloaded to the slot. |
| 1.3.6.1.3.110.1.1.2.2 | ScalardvbNiuSwServerAddrType | read-write | current | The type of address used for the TFTP server. |
| 1.3.6.1.3.110.1.1.2.3 | ScalardvbNiuSwServer | read-write | current | This is the IP address of the TFTP server used for s/w updates |
| 1.3.6.1.3.110.1.1.2.4 | ScalardvbNiuSwFilename | read-write | current | This is the filename including the path for the software image that is to be downloaded. |
| 1.3.6.1.3.110.1.1.2.5 | ScalardvbNiuSwDownloadSlot | read-write | current | This identifies the image slot which the software is to be downloaded into. The operator can manually select the slot to download into. Slot 0 is a special cas… |
| 1.3.6.1.3.110.1.1.2.6 | ScalardvbNiuSwAdminStatus | read-write | current | This will administer the software upgrade and provide status of its progress. InitiateUpgrade - This is the only admin selectable value and initiates the upgra… |
| 1.3.6.1.3.110.1.1.3 | NodedvbNiuDhcp | |||
| 1.3.6.1.3.110.1.1.3.1 | TabledvbNiuDhcpTable | not-accessible | current | This table is used to manage the DHCP/BOOTP functionality on a per interface basis. All DHCP/BOOTP requests will be via the HFC interface. |
| 1.3.6.1.3.110.1.1.3.1.1 | RowdvbNiuDhcpEntry | not-accessible | current | There will be a row for every interface within the equipment. For the HFC interface which is identified by 3 interfaces, the dvbRccMacLayer I/F shall be used t… |
| 1.3.6.1.3.110.1.1.3.1.1.1 | ColumndvbNiuDhcpIndex | not-accessible | current | Index used to order the application of backup entries. |
| 1.3.6.1.3.110.1.1.3.1.1.2 | ColumndvbNiuDhcpServerAddrType | read-create | current | The type of IP address for the DHCP server. |
| 1.3.6.1.3.110.1.1.3.1.1.3 | ColumndvbNiuDhcpServer | read-create | current | The IP address of the DHCP / BOOTP server to be used for DHCP/BOOTP requests for the / received by the interface. This server MUST be accessible through the HF… |
| 1.3.6.1.3.110.1.1.3.1.1.4 | ColumndvbNiuDhcpRelay | read-create | current | This is used to select whether the NIU will relay DHCP/BootP requests received from this interface to the HFC interface. This option is ignored for the HFC int… |
| 1.3.6.1.3.110.1.1.3.1.1.5 | ColumndvbNiuDhcpReqIf | read-create | current | This is used to select whether the NIU will request an IP address by DHCP/BootP for this interface via the HFC interface. If this is disabled then there must b… |
| 1.3.6.1.3.110.1.1.3.1.1.6 | ColumndvbNiuDhcpSerType | read-create | current | This is used to identify whether the specified server for the interface is the primary server or backup. In the event that the primary server does not respond,… |
| 1.3.6.1.3.110.1.1.3.1.1.7 | ColumndvbNiuDhcpState | read-only | current | This is the status for DHCP for this interface. idle - No DHCP request has been made waitingForDHCPoffer - Waiting for DHCP offer waitingForDHCPack - Waiting f… |
| 1.3.6.1.3.110.1.1.3.1.1.8 | ColumndvbNiuDhcpStatus | read-create | current | Controls and reflects the status of rows in this table. Rows in this table may be created by either the create-and-go or create-and-wait paradigms. There is no… |
| 1.3.6.1.3.110.1.1.4 | NodedvbNiuEvent | |||
| 1.3.6.1.3.110.1.1.4.1 | ScalardvbNiuEventPolicy | read-write | current | This defines event log policy. wrap When full the log wraps stop Stop event logging when full oneHour Clear the log at the start of every hour clearNow Clears … |
| 1.3.6.1.3.110.1.1.4.2 | TabledvbNiuEventControlTable | not-accessible | current | This table defines the action to be taken for the defined event priorities. A row will exist for each priority: Emergency, Alert, Critical, Error, Warning, Not… |
| 1.3.6.1.3.110.1.1.4.2.1 | RowdvbNiuEventControlEntry | not-accessible | current | There is a row per event and are recorded in chronological order. |
| 1.3.6.1.3.110.1.1.4.2.1.1 | ColumndvbNiuEventControlPriority | not-accessible | current | The priority level that is controlled by this entry. These are ordered from most (emergency) to least (debug) critical. Each event with a NIU has a particular … |
| 1.3.6.1.3.110.1.1.4.2.1.2 | ColumndvbNiuEventControlAction | read-write | current | This defines the actions to perform when an event happens of this priority. local causes the event to be written to the local event log. trap causes a trap to … |
| 1.3.6.1.3.110.1.1.4.3 | ScalardvbNiuEventTableMaxSize | read-only | current | The maximum number of entries the event log may hold |
| 1.3.6.1.3.110.1.1.4.4 | TabledvbNiuEventTable | not-accessible | current | Contains a log of network and device events that may be of interest in fault isolation and trouble shooting. |
| 1.3.6.1.3.110.1.1.4.4.1 | RowdvbNiuEventEntry | not-accessible | current | Entries are created when an event occurrs. dvbNiuEventPolicy can be used to clear the table in addition individual events can be deleted. |
| 1.3.6.1.3.110.1.1.4.4.1.1 | ColumndvbNiuEventIndex | not-accessible | current | This provides relative ordering of the objects in the event log. This object will always increase except when (a) the log is reset via dvbNiuEventPolicy, (b) t… |
| 1.3.6.1.3.110.1.1.4.4.1.2 | ColumndvbNiuEventType | read-only | current | This is the priority of the event. |
| 1.3.6.1.3.110.1.1.4.4.1.3 | ColumndvbNiuEventDateTime | read-only | current | This is the date and time the event occurred. |
| 1.3.6.1.3.110.1.1.4.4.1.4 | ColumndvbNiuEventDescription | read-only | current | This is a vendor specific textual description of the event. |
| 1.3.6.1.3.110.1.1.4.4.1.5 | ColumndvbNiuEventCode | read-only | current | This is the event code which uniquely identifies the event. The event codes should be in the form tppxxxxx where:- t - identifies who allocated the event ident… |
| 1.3.6.1.3.110.1.1.4.4.1.6 | ColumndvbNiuEventStatus | read-write | current | This is used to delete individual events. The only valid management operation is destroy, which causes the event to be deleted. When read this object should al… |
| 1.3.6.1.3.110.1.1.4.5 | ScalardvbNiuEvThrottleAdminStatus | read-write | current | Controls the transmission of traps with respect to the trap pacing threshold. Valentine Expires August 2001 28 DVB Cable Network Interface Unit MIB February 20… |
| 1.3.6.1.3.110.1.1.4.6 | ScalardvbNiuEvThrottleInhibited | read-only | current | If true(1), trap is currently inhibited due to thresholds and/or the current setting of dvbNiuEvThrottleAdminStatus. In addition, this is set to true(1) if tra… |
| 1.3.6.1.3.110.1.1.4.7 | ScalardvbNiuEvThrottleThreshold | read-write | current | Number of trap events per DvbNiuEvThrottleInterval to be transmitted before throttling. At initial startup, this object returns 0. |
| 1.3.6.1.3.110.1.1.4.8 | ScalardvbNiuEvThrottleInterval | read-write | current | The interval over which the trap threshold applies. At initial startup, this object has a value of 1. |
| 1.3.6.1.3.110.1.1.5 | NodedvbNiuIpFilter | |||
| 1.3.6.1.3.110.1.1.5.1 | ScalardvbNiuIpFilterEnable | read-write | current | This controls the IP filter table. enable - Enables the IP filter table. countHits - This option is used to debug the filter table. It allows packets to be che… |
| 1.3.6.1.3.110.1.1.5.2 | TabledvbNiuIpFilterTable | not-accessible | current | An ordered list of filters or classifiers to apply to IP traffic. Filter application is ordered by the filter index, rather than by a best match algorithm (Not… |
| 1.3.6.1.3.110.1.1.5.2.1 | RowdvbNiuIpFilterEntry | not-accessible | current | Describes a filter to apply to IP traffic received on a specified interface. All identity objects in this table (e.g. source and destination address/mask, prot… |
| 1.3.6.1.3.110.1.1.5.2.1.1 | ColumndvbNiuIpFilterIndex | not-accessible | current | |
| 1.3.6.1.3.110.1.1.5.2.1.2 | ColumndvbNiuIpFilterStatus | read-create | current | Controls and reflects the status of rows in this table. Specifying only this object (with the appropriate index) on a NIU is sufficient to create a filter row … |
| 1.3.6.1.3.110.1.1.5.2.1.4 | ColumndvbNiuIpFilterIfIndex | read-create | current | The entry interface to which this filter applies. The value corresponds to ifIndex for either a CATV MAC or another network interface. If the value is zero, th… |
| 1.3.6.1.3.110.1.1.5.2.1.5 | ColumndvbNiuIpFilterDirection | read-create | current | Determines whether the filter is applied to inbound(1) traffic, outbound(2) traffic, or traffic in both(3) directions. |
| 1.3.6.1.3.110.1.1.5.2.1.6 | ColumndvbNiuIpFilterTos | read-create | current | This is the value to be matched to the packet's TOS (Type of Service) value (after the TOS value is AND'd with dvbNiuIpFilterTosMask). A value for this object … |
| 1.3.6.1.3.110.1.1.5.2.1.7 | ColumndvbNiuIpFilterTosMask | read-create | current | The mask to be applied to the packet's TOS value before matching. |
| 1.3.6.1.3.110.1.1.5.2.1.8 | ColumndvbNiuIpFilterSrcAddrType | read-create | current | The type of IP address for the source address. |
| 1.3.6.1.3.110.1.1.5.2.1.9 | ColumndvbNiuIpFilterSrcAddr | read-create | current | The source IP address, or portion thereof, that is to be matched for this filter. The source address is first masked (and'ed) against dvbNiuIpFilterSrcMask bef… |
| 1.3.6.1.3.110.1.1.5.2.1.10 | ColumndvbNiuIpFilterSrcMaskType | read-create | current | The type of IP address for the source address mask. |
| 1.3.6.1.3.110.1.1.5.2.1.11 | ColumndvbNiuIpFilterSrcMask | read-create | current | |
| 1.3.6.1.3.110.1.1.5.2.1.12 | ColumndvbNiuIpFilterDstAddrType | read-create | current | The type of IP address for the destination address. |
| 1.3.6.1.3.110.1.1.5.2.1.13 | ColumndvbNiuIpFilterDstAddr | read-create | current | The destination IP address, or portion thereof, that is to be matched for this filter. The destination address is first masked (and'ed) against dvbNiuIpFilterD… |
| 1.3.6.1.3.110.1.1.5.2.1.14 | ColumndvbNiuIpFilterDstMaskType | read-create | current | The type of IP address for the destination address mask. |
| 1.3.6.1.3.110.1.1.5.2.1.15 | ColumndvbNiuIpFilterDstMask | read-create | current | A bit mask that is to be applied to the destination address prior to matching. This mask is not necessarily the same as a subnet mask, but 1's bits must be lef… |
| 1.3.6.1.3.110.1.1.5.2.1.16 | ColumndvbNiuIpFilterProtocol | read-create | current | The IP protocol value that is to be matched. For example: icmp is 1, tcp is 6, udp is 17. A value of 256 matches ANY protocol. |
| 1.3.6.1.3.110.1.1.5.2.1.17 | ColumndvbNiuIpFilterSrcPortLow | read-create | current | If dvbNiuIpFilterProtocol is udp or tcp, this is the inclusive lower bound of the transport-layer source port range that is to be matched, otherwise it is igno… |
| 1.3.6.1.3.110.1.1.5.2.1.18 | ColumndvbNiuIpFilterSrcPortHigh | read-create | current | If dvbNiuIpFilterProtocol is udp or tcp, this is the inclusive upper bound of the transport-layer source port range that is to be matched, otherwise it is igno… |
| 1.3.6.1.3.110.1.1.5.2.1.19 | ColumndvbNiuIpFilterDstPortLow | read-create | current | If dvbNiuIpFilterProtocol is udp or tcp, this is the inclusive lower bound of the transport-layer destination port range that is to be matched, otherwise it is… |
| 1.3.6.1.3.110.1.1.5.2.1.20 | ColumndvbNiuIpFilterDstPortHigh | read-create | current | If dvbNiuIpFilterProtocol is udp or tcp, this is the inclusive upper bound of the transport-layer destination port range that is to be matched, otherwise it is… |
| 1.3.6.1.3.110.1.1.5.2.1.21 | ColumndvbNiuIpFilterAction | read-create | current | This is the action to be performed if there is a match against this filter. Possible actions are: discard - Discard the packet. accept - Accept the packet for … |
| 1.3.6.1.3.110.1.1.5.2.1.22 | ColumndvbNiuIpFilterMatches | read-only | current | Counts the number of times this filter was matched. This object is initialized to 0 at boot, or at row creation, and is reset only upon reboot. |
| 1.3.6.1.3.110.1.1.5.2.1.23 | ColumndvbNiuIpFilterContinue | read-create | current | If this value is set to true and dvbNiuIpFilterAction is not discard, continue scanning and applying matching filter actions. |
| 1.3.6.1.3.110.1.1.5.2.1.24 | ColumndvbNiuIpFilterActionPtr | read-create | current | This object identifies the dvbNiuIpTosMapPolicyId Valentine Expires August 2001 36 DVB Cable Network Interface Unit MIB February 2001 in dvbNiuIpTOSMapTable th… |
| 1.3.6.1.3.110.1.1.5.3 | TabledvbNiuIpTOSMapTable | not-accessible | current | A Table which maps between a policy id (dvbNiuIpTosMapPolicyId) and a policy to be applied. This table applies only to the TOS within the IP header. Policy ID … |
| 1.3.6.1.3.110.1.1.5.3.1 | RowdvbNiuIpTOSMapEntry | not-accessible | current | Table used to describe Type of Service (TOS) bits processing. This table is an adjunct to the dvbNiuIpFilterTable. Entries in the latter table can point to spe… |
| 1.3.6.1.3.110.1.1.5.3.1.1 | ColumndvbNiuIpTosMapIndex | not-accessible | current | The unique index for this row. There are no ordering requirements for this table and any valid index may be specified. |
| 1.3.6.1.3.110.1.1.5.3.1.2 | ColumndvbNiuIpTosMapPolicyId | read-only | current | The unique index for this row. There are no ordering requirements for this table and any valid index may be specified. This index is used by dvbNiuIpFilterPoli… |
| 1.3.6.1.3.110.1.1.5.3.1.3 | ColumndvbNiuIpTosMapStatus | read-create | current | The object used to create and delete entries in this table. A row created by specifying just this object results in a row which specifies no change to the TOS … |
| 1.3.6.1.3.110.1.1.5.3.1.4 | ColumndvbNiuIpTosMapAndMask | read-create | current | This value is bitwise AND'd with the matched packet's TOS bits. |
| 1.3.6.1.3.110.1.1.5.3.1.5 | ColumndvbNiuIpTosMapOrMask | read-create | current | After bitwise AND'ing with the above bits, the packet's Valentine Expires August 2001 38 DVB Cable Network Interface Unit MIB February 2001 TOS bits are bitwis… |
| 1.3.6.1.3.110.1.1.6 | NodedvbNiuNat | |||
| 1.3.6.1.3.110.1.1.6.1 | TabledvbNiuNatTable | not-accessible | current | This table is used to list external IP addresses available for assignment to internal IP addresses. The filter table is used to identify internal addresses tha… |
| 1.3.6.1.3.110.1.1.6.1.1 | RowdvbNiuNatEntry | not-accessible | current | A row should be created for each external IP address available for translation. When an internal address is assignened to an external address, dvbNiuNatIntIp w… |
| 1.3.6.1.3.110.1.1.6.1.1.1 | ColumndvbNiuNatExtIpType | not-accessible | current | The type of the external IP address available for NAT assignment |
| 1.3.6.1.3.110.1.1.6.1.1.2 | ColumndvbNiuNatExtIp | not-accessible | current | An external IP address available for NAT assignment |
| 1.3.6.1.3.110.1.1.6.1.1.3 | ColumndvbNiuNatIntIpType | read-only | current | The type of the internal IP address assigned for NAT. |
| 1.3.6.1.3.110.1.1.6.1.1.4 | ColumndvbNiuNatIntIp | read-only | current | The internal IP address assigned to the external IP address. If no address is assigned this will be all 0's. |
| 1.3.6.1.3.110.1.1.6.1.1.5 | ColumndvbNiuNatStatus | read-create | current | This controls and reflects the status of the row. Rows can be created by using both createAndGo and createAndWait. Rows can be modified/deleted ONLY if the dvb… |
| 1.3.6.1.3.110.1.1.7 | NodedvbNiuNapt | |||
| 1.3.6.1.3.110.1.1.7.1 | ScalardvbNiuNaptAddrType | read-write | current | The type of external IP address to be used for NAPT. |
| 1.3.6.1.3.110.1.1.7.2 | ScalardvbNiuNaptAddr | read-write | current | The external IP address to be used for NAPT. The filter table is used to identify internal addresses that require NAPT before entering the external domain (ups… |
| 1.3.6.1.3.110.1.1.7.3 | TabledvbNiuNaptTable | not-accessible | current | This table lists the current internal/external port assignments. The NAPT assignment algorithims used for port assignments are vendor dependant. |
| 1.3.6.1.3.110.1.1.7.3.1 | RowdvbNiuNaptEntry | not-accessible | current | A row should be created for each internal to external port mapping. Each row contains the internal and external ports used in the mapping, and the internal IP … |
| 1.3.6.1.3.110.1.1.7.3.1.1 | ColumndvbNiuNaptExtPort | not-accessible | current | The external port assigned to the internal port/IP Address. |
| 1.3.6.1.3.110.1.1.7.3.1.2 | ColumndvbNiuNaptIntPort | read-only | current | The internal port that required mapping to the external port. |
| 1.3.6.1.3.110.1.1.7.3.1.3 | ColumndvbNiuNaptIntIpType | read-only | current | The internal IP address type. |
| 1.3.6.1.3.110.1.1.7.3.1.4 | ColumndvbNiuNaptIntIp | read-only | current | The internal IP address of the host to which the port mapping is being applied. |
| 1.3.6.1.3.110.1.1.8 | NodedvdNiuEthFilter | |||
| 1.3.6.1.3.110.1.1.8.1 | ScalardvbNiuEthernetFilterEnable | read-write | current | This controls the Ethernet filter table. enable - Enables the Ethernet filter table. countHits - This option is used to debug the filter table. It allows frame… |
| 1.3.6.1.3.110.1.1.8.2 | TabledvbNiuEthernetFilterTable | not-accessible | current | A list of filters to apply to Ethernet type frames to control the types of upper layer protocols that can be transported. The EtherType/LLC field is examined a… |
| 1.3.6.1.3.110.1.1.8.2.1 | RowdvbNiuEthernetFilterEntry | not-accessible | current | Describes a filter to apply to Ethernet frame received on a specified interface. The dvbNiuEthernetFilterProtocol in this table must match its respective field… |
| 1.3.6.1.3.110.1.1.8.2.1.1 | ColumndvbNiuEthernetFilterIndex | not-accessible | current | The unique index for this row. There are no ordering requirements for this table and any valid index may be specified. |
| 1.3.6.1.3.110.1.1.8.2.1.2 | ColumndvbNiuEthernetFilterStatus | read-create | current | Controls and reflects the status of rows in this table. Creation of the rows may be done via either create-and-wait or create-and-go, but the filter is not app… |
| 1.3.6.1.3.110.1.1.8.2.1.3 | ColumndvbNiuEthernetFilterIfIndex | read-create | current | The entry interface to which this filter applies. The value corresponds to ifIndex for either a CATV MAC or another network interface. If the value is zero, th… |
| 1.3.6.1.3.110.1.1.8.2.1.4 | ColumndvbNiuEthernetFilterEtherType | read-create | current | The format of the etherent frame. This can be Ethernet2, 802.2 SNAP or 802.2 LLC. This is used to correctly locate the field identifying the protocol being tra… |
| 1.3.6.1.3.110.1.1.8.2.1.4 | ColumndvbNiuEthernetFilterProtocol | read-create | current | The protocol to filter on. For Ethernet2 and 802.2 SNAP the value in the EtherType field is checked. For 802.2 LLC the valus in the SAP field is checked. |
| 1.3.6.1.3.110.1.1.8.2.1.5 | ColumndvbNiuEthernetFilterAction | read-create | current | The action to be taken when there is a filter match. If it is accept, the frame will be forwarded otherwise the frame will be discarded. |
| 1.3.6.1.3.110.1.1.8.2.1.6 | ColumndvbNiuEthernetFilterMatches | read-create | current | Counts the number of times this filter was matched. This object is initialized to 0 at boot, or at row creation, and is reset only upon reboot. |
| 1.3.6.1.3.110.1.1.9 | NodedvbNiuCpe | |||
| 1.3.6.1.3.110.1.1.9.1 | ScalardvbNiuCpeEnroll | read-write | current | This object controls the population of dvbNiuCpeTable. If set to none, the filters must be set manually. If set to any, the NIU sniffs the packets originating … |
| 1.3.6.1.3.110.1.1.9.2 | ScalardvbNiuCpeIpMax | read-write | current | This object controls the maximum number of CPEs allowed to connect behind this device. If set to zero, any number of CPEs may connect up to the maximum permitt… |
| 1.3.6.1.3.110.1.1.9.3 | TabledvbNiuCpeTable | not-accessible | current | This table lists the IP addresses seen (or permitted) as source addresses in packets originating from the customer interface on this device. In addition, this … |
| 1.3.6.1.3.110.1.1.9.3.1 | RowdvbNiuCpeEntry | not-accessible | current | An entry in the dvbNiuCpeTable. There is one entry for each IP CPE seen or provisioned. If dvbNiuCpeIpMax is set to -1, this table is ignored, otherwise: Upon … |
| 1.3.6.1.3.110.1.1.9.3.1.1 | ColumndvbNiuCpeIpType | not-accessible | current | The type of IP address used for the identified CPE. |
| 1.3.6.1.3.110.1.1.9.3.1.2 | ColumndvbNiuCpeIp | not-accessible | current | The IP address to which this entry applies. |
| 1.3.6.1.3.110.1.1.9.3.1.3 | ColumndvbNiuCpeMaskType | read-create | current | The type of IP address for the CPE address mask. |
| 1.3.6.1.3.110.1.1.9.3.1.4 | ColumndvbNiuCpeMask | read-create | current | |
| 1.3.6.1.3.110.1.1.9.3.1.5 | ColumndvbNiuCpeSource | read-only | current | This object describes how this entry was created. If the value is manual(2), this row was created by a network management action (either configuration, or SNMP… |
| 1.3.6.1.3.110.1.1.9.3.1.6 | ColumndvbNiuCpeStatus | read-create | current | Controls and reflects the status of rows in this table. Creation of the rows may be done via either create-and-wait or create-and-go. There is no restriction i… |
| 1.3.6.1.3.110.1.2 | NodedvbNiuMIBConform | |||
| 1.3.6.1.3.110.1.2.1 | NodedvbNiuCompliances | |||
| 1.3.6.1.3.110.1.2.1.1 | CompliancedvbNiuCompliance | current | The compliance statement for EuroModem NIUs which implement the DVB-CABLE-NIU-MIB MIB. An implmentation only has to support IPv4 addresses to be compliant. | |
| 1.3.6.1.3.110.1.2.2 | NodedvbNiuGroups | |||
| 1.3.6.1.3.110.1.2.2.1 | GroupdvbNiuSystemGroup | current | A collection of objects providing basic system level control and instrumentation of the EuroModem. | |
| 1.3.6.1.3.110.1.2.2.2 | GroupdvbNiuSoftwareGroup | current | A collection of objects providing control and instrumentation of the EuroModem's software. | |
| 1.3.6.1.3.110.1.2.2.3 | GroupdvbNiuDhcpGroup | current | A collection of objects providing control over the EuroModem's DHCP/Bootp functionality. | |
| 1.3.6.1.3.110.1.2.2.4 | GroupdvbNiuEventGroup | current | ||
| 1.3.6.1.3.110.1.2.2.5 | GroupdvbNiuIpFilterGroup | current | A collection of objects providing a filtering capability at the IP layer. | |
| 1.3.6.1.3.110.1.2.2.6 | GroupdvbNiuEthFilterGroup | current | A collection of objects providing a filtering capability at the Ethernet layer. | |
| 1.3.6.1.3.110.1.2.2.7 | GroupdvbNiuNatGroup | current | A collection of objects providing address translation at either the address level | |
| 1.3.6.1.3.110.1.2.2.8 | GroupdvbNiuNaptGroup | current | A collection of objects providing address translation at either the port level | |
| 1.3.6.1.3.110.1.2.2.9 | GroupdvbNiuCpeGroup | current | A collection of objects providing anti spoofing / CPE address management |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DvbEventPriority | INTEGER { emergency(1), alert(2), critical(3), error(4), warning(5), notice(6), information(7), debug(8) } Valentine Expires August 2001 12 DVB Cable Network Interface Unit MIB February 2001 | current | This represents possible event priorities. These are ordered from most (emergency) critical to least (debug)critical. |