ECS4610-24F-MIB
1673 objects
The MIB module for ECS4610-24F.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.259 | Nodeaccton | |||
| 1.3.6.1.4.1.259.10 | Nodeedgecorenetworks | |||
| 1.3.6.1.4.1.259.10.1 | NodeedgeCoreNetworksMgt | |||
| 1.3.6.1.4.1.259.10.1.5 | Identityecs4610-24fMIB | The MIB module for ECS4610-24F. | ||
| 1.3.6.1.4.1.259.10.1.5.1 | Nodeecs4610-24fMIBObjects | |||
| 1.3.6.1.4.1.259.10.1.5.1.1 | NodeswitchMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.1.2 | ScalarswitchNumber | read-only | current | The total number of switches present on this system. |
| 1.3.6.1.4.1.259.10.1.5.1.1.3 | TableswitchInfoTable | not-accessible | current | Table of descriptive and status information about the switch units in this system. |
| 1.3.6.1.4.1.259.10.1.5.1.1.3.1 | RowswitchInfoEntry | not-accessible | current | Table providing descriptions and status information for switch units. |
| 1.3.6.1.4.1.259.10.1.5.1.1.3.1.1 | ColumnswUnitIndex | not-accessible | current | This object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber. |
| 1.3.6.1.4.1.259.10.1.5.1.1.3.1.2 | ColumnswHardwareVer | read-only | current | Hardware version of the main board. |
| 1.3.6.1.4.1.259.10.1.5.1.1.3.1.3 | ColumnswMicrocodeVer | read-only | current | Microcode version of the main board. |
| 1.3.6.1.4.1.259.10.1.5.1.1.3.1.4 | ColumnswLoaderVer | read-only | current | Loader version of the main board. |
| 1.3.6.1.4.1.259.10.1.5.1.1.3.1.5 | ColumnswBootRomVer | read-only | current | Boot ROM code version of the main board. |
| 1.3.6.1.4.1.259.10.1.5.1.1.3.1.6 | ColumnswOpCodeVer | read-only | current | Operation code version of the main board. |
| 1.3.6.1.4.1.259.10.1.5.1.1.3.1.7 | ColumnswPortNumber | read-only | current | The number of ports on this switch. |
| 1.3.6.1.4.1.259.10.1.5.1.1.3.1.8 | ColumnswPowerStatus | read-only | current | Indicates the switch using internalPower(1), redundantPower(2) or both(3) |
| 1.3.6.1.4.1.259.10.1.5.1.1.3.1.9 | ColumnswRoleInSystem | read-only | current | Indicates the switch is master(1), backupMaster(2) or slave(3) in this system. |
| 1.3.6.1.4.1.259.10.1.5.1.1.3.1.10 | ColumnswSerialNumber | read-only | current | Serial number of the switch. |
| 1.3.6.1.4.1.259.10.1.5.1.1.3.1.11 | ColumnswExpansionSlot1 | read-only | current | Type of expansion module in this switch slot 1. |
| 1.3.6.1.4.1.259.10.1.5.1.1.3.1.12 | ColumnswExpansionSlot2 | read-only | current | Type of expansion module in this switch slot 2. |
| 1.3.6.1.4.1.259.10.1.5.1.1.3.1.13 | ColumnswServiceTag | read-only | current | Service tag serial-number of the switch. |
| 1.3.6.1.4.1.259.10.1.5.1.1.3.1.14 | ColumnswModelNumber | read-only | current | Model number of the switch. |
| 1.3.6.1.4.1.259.10.1.5.1.1.3.1.15 | ColumnswEpldVer | read-only | current | The EPLD version of the switch. |
| 1.3.6.1.4.1.259.10.1.5.1.1.3.1.16 | ColumnswExpectedModuleOpCodeVer | read-only | current | The module opcode version reside in the switch, note that this variable represent the desired version of the module which might plug in. For version validation… |
| 1.3.6.1.4.1.259.10.1.5.1.1.4 | ScalarswitchOperState | read-only | current | Global operation state of the switch. |
| 1.3.6.1.4.1.259.10.1.5.1.1.5 | NodeswitchProductId | |||
| 1.3.6.1.4.1.259.10.1.5.1.1.5.1 | ScalarswProdName | read-only | current | The product name of this switch. |
| 1.3.6.1.4.1.259.10.1.5.1.1.5.2 | ScalarswProdManufacturer | read-only | current | The product manufacturer of this switch. |
| 1.3.6.1.4.1.259.10.1.5.1.1.5.3 | ScalarswProdDescription | read-only | current | The product description of this switch. |
| 1.3.6.1.4.1.259.10.1.5.1.1.5.4 | ScalarswProdVersion | read-only | current | The runtime code version of this switch. |
| 1.3.6.1.4.1.259.10.1.5.1.1.5.5 | ScalarswProdUrl | read-only | current | The URL of this switch, which we can connect through a web browser. |
| 1.3.6.1.4.1.259.10.1.5.1.1.5.6 | ScalarswIdentifier | read-only | current | A unique identifier of which switch in the chassis is currently being looked at. |
| 1.3.6.1.4.1.259.10.1.5.1.1.5.7 | ScalarswChassisServiceTag | read-only | current | The service tag of the chassis this switch resides in. |
| 1.3.6.1.4.1.259.10.1.5.1.1.6 | TableswitchIndivPowerTable | not-accessible | current | Table about the status of individual powers. |
| 1.3.6.1.4.1.259.10.1.5.1.1.6.1 | RowswitchIndivPowerEntry | not-accessible | current | Table about the status of individual power. |
| 1.3.6.1.4.1.259.10.1.5.1.1.6.1.1 | ColumnswIndivPowerUnitIndex | accessible-for-notify | current | This is defined as swUnitIndex. |
| 1.3.6.1.4.1.259.10.1.5.1.1.6.1.2 | ColumnswIndivPowerIndex | accessible-for-notify | current | 1 means internal power, 2 means external power. |
| 1.3.6.1.4.1.259.10.1.5.1.1.6.1.3 | ColumnswIndivPowerStatus | read-only | current | notPresent(1) means not present, green(2) means up, red(3) means down. |
| 1.3.6.1.4.1.259.10.1.5.1.1.7 | ScalarswitchJumboFrameStatus | read-write | current | enable(1) means the Jumbo Frame has enabled, disabled(2) means the Jumbo Frame has disabled. |
| 1.3.6.1.4.1.259.10.1.5.1.1.8 | NodeamtrMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.1.8.3 | ScalaramtrMacAddrAgingStatus | read-write | current | If this is enabled(1), the MAC address table will age out according to its timer. If this is disabled(2), the MAC address table will not age out. |
| 1.3.6.1.4.1.259.10.1.5.1.1.14 | ScalarswitchRenumberUnitID | read-write | current | The value renumber will automatically assign an ID to units in the stack; all UNIT IDs will be contiguous. The system configurations are not changed but the sy… |
| 1.3.6.1.4.1.259.10.1.5.1.1.18 | ScalarswitchSystemJumboMtu | read-write | current | System jumbo frame size (MTU). |
| 1.3.6.1.4.1.259.10.1.5.1.2 | NodeportMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.2.1 | TableportTable | not-accessible | current | Table of descriptive and status information describing the configuration of each switch port. This table also contains information about each trunk. |
| 1.3.6.1.4.1.259.10.1.5.1.2.1.1 | RowportEntry | not-accessible | current | An entry in the table, describing the configuration of one switch port or trunk. |
| 1.3.6.1.4.1.259.10.1.5.1.2.1.1.1 | ColumnportIndex | not-accessible | current | The port and the trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface… |
| 1.3.6.1.4.1.259.10.1.5.1.2.1.1.2 | ColumnportName | read-write | current | The name of the port or trunk. This is the same as ifAlias in the IF-MIB (RFC2863 or later). |
| 1.3.6.1.4.1.259.10.1.5.1.2.1.1.3 | ColumnportType | read-only | current | Indicates the port type of the configuration of the switch. |
| 1.3.6.1.4.1.259.10.1.5.1.2.1.1.4 | ColumnportSpeedDpxCfg | read-write | current | Configures the speed and duplex mode for a port or trunk, according to: halfDuplex10(2) - 10Mbps and half duplex mode fullDuplex10(3) - 10Mbps and full duplex … |
| 1.3.6.1.4.1.259.10.1.5.1.2.1.1.5 | ColumnportFlowCtrlCfg | read-write | current | (1) Flow control mechanism is enabled with tx and rx pause mechansim. If the port type is hundredBaseTX or thousandBaseSX: When the port is operating in halfDu… |
| 1.3.6.1.4.1.259.10.1.5.1.2.1.1.6 | ColumnportCapabilities | read-write | current | Port or trunk capabilities. |
| 1.3.6.1.4.1.259.10.1.5.1.2.1.1.7 | ColumnportAutonegotiation | read-write | current | Whether auto-negotiation is enabled. |
| 1.3.6.1.4.1.259.10.1.5.1.2.1.1.8 | ColumnportSpeedDpxStatus | read-only | current | The operating speed and duplex mode of the switched port or trunk. If the entry represents a trunk, the speed is that of its individual members unless the memb… |
| 1.3.6.1.4.1.259.10.1.5.1.2.1.1.9 | ColumnportFlowCtrlStatus | read-only | current | (2) BackPressure flow control mechanism is used. (3) IEEE 802.3 flow control mechanism is used. (4) Flow control mechanism is disabled. If the entry represents… |
| 1.3.6.1.4.1.259.10.1.5.1.2.1.1.10 | ColumnportTrunkIndex | read-only | current | The trunk to which this port belongs. A value of 0 means that this port does not belong to any trunk. A value greater than zero means that this port belongs to… |
| 1.3.6.1.4.1.259.10.1.5.1.2.1.1.12 | ColumnportComboForcedMode | read-write | current | This determines the running mode of a combo port. For a non-combo port, this variable has a value of none(1), and setting this variable to none(1) has no effec… |
| 1.3.6.1.4.1.259.10.1.5.1.2.1.1.16 | ColumnportMtu | read-write | current | Maximum frame size of port. If the size of the incoming packet is larger than this value, the packet will be discarded. |
| 1.3.6.1.4.1.259.10.1.5.1.2.1.1.17 | ColumnportMacAddrLearningStatus | read-write | current | Set this variable to enabled(1) to start to learn MAC addresses. Set this variable to disabled(2) to stop to learn MAC addresses. |
| 1.3.6.1.4.1.259.10.1.5.1.2.1.1.18 | ColumnportMacAddrLearningCount | read-only | current | The current number of learned MAC addresses. |
| 1.3.6.1.4.1.259.10.1.5.1.2.3 | NodecableDiagMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.2.3.1 | ScalarcableDiagCtlAction | read-write | current | To execute cable diagnostics on a port, assign cableDiagCtlAction to the value of ifIndex defined by the ifIndex in the IF-MIB. When read, this object always r… |
| 1.3.6.1.4.1.259.10.1.5.1.2.3.2 | TablecableDiagResultTable | not-accessible | current | Table for cable diagnostics result. |
| 1.3.6.1.4.1.259.10.1.5.1.2.3.2.1 | RowcableDiagResultEntry | not-accessible | current | Entry for cable diagnostics result. |
| 1.3.6.1.4.1.259.10.1.5.1.2.3.2.1.1 | ColumncableDiagResultIfIndex | not-accessible | current | This is defined as the ifIndex. |
| 1.3.6.1.4.1.259.10.1.5.1.2.3.2.1.2 | ColumncableDiagResultStatusPairA | read-only | current | The result of cable diagnostics. If there is no fault on the cable, the value is ok(2). Value notTestedYet(1) means the pair is not tested yet. Value ok(2) mea… |
| 1.3.6.1.4.1.259.10.1.5.1.2.3.2.1.3 | ColumncableDiagResultStatusPairB | read-only | current | The result of cable diagnostics. If there is no fault on the cable, the value is ok(2). Value notTestedYet(1) means the pair is not tested yet. Value ok(2) mea… |
| 1.3.6.1.4.1.259.10.1.5.1.2.3.2.1.4 | ColumncableDiagResultStatusPairC | read-only | current | The result of cable diagnostics. If there is no fault on the cable, the value is ok(2). Value notTestedYet(1) means the pair is not tested yet. Value ok(2) mea… |
| 1.3.6.1.4.1.259.10.1.5.1.2.3.2.1.5 | ColumncableDiagResultStatusPairD | read-only | current | The result of cable diagnostics. If there is no fault on the cable, the value is ok(2). Value notTestedYet(1) means the pair is not tested yet. Value ok(2) mea… |
| 1.3.6.1.4.1.259.10.1.5.1.2.3.2.1.6 | ColumncableDiagResultDistancePairA | read-only | current | Displays the fault distance of pair A of the cable in meters. |
| 1.3.6.1.4.1.259.10.1.5.1.2.3.2.1.7 | ColumncableDiagResultDistancePairB | read-only | current | Displays the fault distance of pair B of the cable in meters. |
| 1.3.6.1.4.1.259.10.1.5.1.2.3.2.1.8 | ColumncableDiagResultDistancePairC | read-only | current | Displays the fault distance of pair C of the cable in meters. If the port is 10/100 type, value of the node is zero. |
| 1.3.6.1.4.1.259.10.1.5.1.2.3.2.1.9 | ColumncableDiagResultDistancePairD | read-only | current | Displays the fault distance of pair D of the cable in meters. If the port is 10/100 type, value of the node is zero. |
| 1.3.6.1.4.1.259.10.1.5.1.2.3.2.1.10 | ColumncableDiagResultDistanceAccuracy | read-only | current | Displays the accuracy in meters of the cable testing. |
| 1.3.6.1.4.1.259.10.1.5.1.2.3.2.1.11 | ColumncableDiagResultTime | read-only | current | Displays the last time of cable diagnostics. For example, 'Jan 1 02:03:04 2002'. |
| 1.3.6.1.4.1.259.10.1.5.1.2.4 | NodeloopbackTestMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.2.4.1 | ScalarloopInternalCtlAction | read-write | current | To execute internal loopback test on a port, assign loopInternalCtlAction to the value of ifIndex defined by the ifIndex in the IF-MIB. When read, this object … |
| 1.3.6.1.4.1.259.10.1.5.1.2.4.2 | TableloopInternalResultTable | not-accessible | current | Table for internal loopback test result. |
| 1.3.6.1.4.1.259.10.1.5.1.2.4.2.1 | RowloopInternalResultEntry | not-accessible | current | Entry for internal loopback test result. |
| 1.3.6.1.4.1.259.10.1.5.1.2.4.2.1.1 | ColumnloopInternalResultIfIndex | not-accessible | current | This is defined as the ifIndex. |
| 1.3.6.1.4.1.259.10.1.5.1.2.4.2.1.2 | ColumnloopInternalResultStatus | read-only | current | The result of internal loopback. |
| 1.3.6.1.4.1.259.10.1.5.1.2.4.2.1.3 | ColumnloopInternalResultTime | read-only | current | Displays the last time of internal loopback. For example, 'Jan 1 02:03:04 2002'. |
| 1.3.6.1.4.1.259.10.1.5.1.2.6 | TableportUtilTable | not-accessible | current | Dispalys port utilization during recent 300 seconds. |
| 1.3.6.1.4.1.259.10.1.5.1.2.6.1 | RowportUtilEntry | not-accessible | current | Dispalys port utilization during recent 300 seconds. |
| 1.3.6.1.4.1.259.10.1.5.1.2.6.1.1 | ColumnportUtilIfIndex | not-accessible | current | The port and trunk interface of the portUtilTable. The interface identified by a particular value of this index is the same interface identified by the same va… |
| 1.3.6.1.4.1.259.10.1.5.1.2.6.1.2 | ColumnportInOctetRate | read-only | current | The input octet rate (kbits/sec) of the port. |
| 1.3.6.1.4.1.259.10.1.5.1.2.6.1.3 | ColumnportInPacketRate | read-only | current | The input packet rate (pkts/sec) of the port. |
| 1.3.6.1.4.1.259.10.1.5.1.2.6.1.4 | ColumnportInUtil | read-only | current | The input utilization of the port, in one per hundred. |
| 1.3.6.1.4.1.259.10.1.5.1.2.6.1.5 | ColumnportOutOctetRate | read-only | current | The output octet rate (kbits/sec) of the port. |
| 1.3.6.1.4.1.259.10.1.5.1.2.6.1.6 | ColumnportOutPacketRate | read-only | current | The output packet rate (pkts/sec) of the port. |
| 1.3.6.1.4.1.259.10.1.5.1.2.6.1.7 | ColumnportOutUtil | read-only | current | The output utilization of the port, in one per hundred. |
| 1.3.6.1.4.1.259.10.1.5.1.2.7 | TableportVlanTrunkingTable | not-accessible | current | Configures vlan trunking feature. |
| 1.3.6.1.4.1.259.10.1.5.1.2.7.1 | RowportVlanTrunkingEntry | not-accessible | current | Configures vlan trunking feature. |
| 1.3.6.1.4.1.259.10.1.5.1.2.7.1.1 | ColumnportVlanTrunkingIfIndex | not-accessible | current | The port and trunk interface of the portVlanTrunkingTable. The interface identified by a particular value of this index is the same interface identified by the… |
| 1.3.6.1.4.1.259.10.1.5.1.2.7.1.2 | ColumnportVlanTrunkingStatus | read-write | current | Whether vlan trunking is enabled(1) or disabled(2). |
| 1.3.6.1.4.1.259.10.1.5.1.3 | NodetrunkMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.3.1 | ScalartrunkMaxId | read-only | current | The maximum number for a trunk identifier. |
| 1.3.6.1.4.1.259.10.1.5.1.3.2 | ScalartrunkValidNumber | read-only | current | The number of valid trunks. |
| 1.3.6.1.4.1.259.10.1.5.1.3.3 | TabletrunkTable | not-accessible | current | Table describing the configuration and status of each trunk. |
| 1.3.6.1.4.1.259.10.1.5.1.3.3.1 | RowtrunkEntry | not-accessible | current | An entry describing the configuration and status of a particular trunk. |
| 1.3.6.1.4.1.259.10.1.5.1.3.3.1.1 | ColumntrunkIndex | not-accessible | current | Identifies the trunk within the switch that is described by the table entry. |
| 1.3.6.1.4.1.259.10.1.5.1.3.3.1.2 | ColumntrunkPorts | read-create | current | The complete set of ports currently associated with this trunk. |
| 1.3.6.1.4.1.259.10.1.5.1.3.3.1.3 | ColumntrunkCreation | read-only | current | A value of static(1) means a statically configured trunk. A value of lacp(2) means an LACP-configured trunk. |
| 1.3.6.1.4.1.259.10.1.5.1.3.3.1.4 | ColumntrunkStatus | read-create | current | Writing this to valid(1) creates an entry. Writing this to invalid(2) destroys an entry. A trunk created by LACP cannot be manually destroyed or (re)configured. |
| 1.3.6.1.4.1.259.10.1.5.1.4 | NodelacpMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.4.1 | TablelacpPortTable | not-accessible | current | Table for LACP port configuration. |
| 1.3.6.1.4.1.259.10.1.5.1.4.1.1 | RowlacpPortEntry | not-accessible | current | Entry for LACP port configuration. While an entry may exist for a particular port, the port may not support LACP and an attempt to enable LACP may result in fa… |
| 1.3.6.1.4.1.259.10.1.5.1.4.1.1.1 | ColumnlacpPortIndex | not-accessible | current | The port interface of the lacpPortTable. The interface identified by a particular value of this index is the same interface as identified by the same value of … |
| 1.3.6.1.4.1.259.10.1.5.1.4.1.1.2 | ColumnlacpPortStatus | read-write | current | Whether 802.3ad LACP is enabled. |
| 1.3.6.1.4.1.259.10.1.5.1.5 | NodestaMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.5.1 | ScalarstaSystemStatus | read-write | current | Global spanning tree status. (1) Spanning tree protocol is enabled. (2) Spanning tree protocol is disabled. |
| 1.3.6.1.4.1.259.10.1.5.1.5.2 | TablestaPortTable | not-accessible | current | The table manages port settings for Spanning Tree Protocol 802.1d, 802.1w or 802.1s depending on the value specified by staProtocolType. |
| 1.3.6.1.4.1.259.10.1.5.1.5.2.1 | RowstaPortEntry | not-accessible | current | The conceptual entry of staPortTable. |
| 1.3.6.1.4.1.259.10.1.5.1.5.2.1.3 | ColumnstaPortProtocolMigration | read-write | current | When operating in RSTP (version 2) mode, writing true(1) to this object forces this port to transmit RSTP BPDUs. Any other operation on this object has no effe… |
| 1.3.6.1.4.1.259.10.1.5.1.5.2.1.5 | ColumnstaPortOperEdgePort | read-only | current | The operational value of the edge port parameter. The object is initialized to the value of staPortAdminEdgePort and is set false when a BPDU is received. |
| 1.3.6.1.4.1.259.10.1.5.1.5.2.1.6 | ColumnstaPortAdminPointToPoint | read-write | current | The administrative point-to-point status of the LAN segment attached to this port. A value of forceTrue(0) indicates that this port should always be treated as… |
| 1.3.6.1.4.1.259.10.1.5.1.5.2.1.7 | ColumnstaPortOperPointToPoint | read-only | current | The operational point-to-point status of the LAN segment attached to this port. This indicates whether a port is considered to have a point-to-point connection… |
| 1.3.6.1.4.1.259.10.1.5.1.5.2.1.9 | ColumnstaPortSystemStatus | read-write | current | Per-port spanning tree status. (1) Spanning tree protocol is enabled. (2) Spanning tree protocol is disabled. |
| 1.3.6.1.4.1.259.10.1.5.1.5.2.1.10 | ColumnstaPortLongAdminPathCost | read-write | current | The admin value of the RSTP path cost or MST external pathcost. The contribution of this port to the path cost (in 32 bits value) of paths towards the spanning… |
| 1.3.6.1.4.1.259.10.1.5.1.5.2.1.11 | ColumnstaPortLongOperPathCost | read-only | current | The oper value of the RSTP path cost or MST external pathcost. The contribution of this port to the path cost (in 32 bits value) of paths towards the spanning … |
| 1.3.6.1.4.1.259.10.1.5.1.5.2.1.12 | ColumnstaPortBpduFlooding | read-write | current | This parameter is used to configure the capability of BPDUs flooding. |
| 1.3.6.1.4.1.259.10.1.5.1.5.2.1.15 | ColumnstaPortBpduGuard | read-write | current | A value of enabled(1) indicates that BPDU port guard feature is enabled for each port. A value of disabled(2) indicates that the feature is disabled. |
| 1.3.6.1.4.1.259.10.1.5.1.5.2.1.16 | ColumnstaPortAdminEdgePortWithAuto | read-write | current | The administrative value of the edge port parameter. A value of enable(1) indicates that this port should be assumed as an edge-port, a value of disable(2) ind… |
| 1.3.6.1.4.1.259.10.1.5.1.5.2.1.17 | ColumnstaPortBpduFilter | read-write | current | The administrative value of the BPDU filter parameter. A value of enabled(1) indicates that this port will avoid transmitting BPDUs on edge-port and the value … |
| 1.3.6.1.4.1.259.10.1.5.1.5.2.1.18 | ColumnstaPortRootGuardStatus | read-write | current | Specifies the desired status of the root guard. This variable configures the root guard feature to enforce the root bridge placement in the network. |
| 1.3.6.1.4.1.259.10.1.5.1.5.2.1.19 | ColumnstaPortBpduGuardAutoRecovery | read-write | current | A value of enabled(1) indicates that BPDU port guard auto recovery mechanism is enabled for this port. A value of disabled(2) indicates that the mechanism is d… |
| 1.3.6.1.4.1.259.10.1.5.1.5.2.1.20 | ColumnstaPortBpduGuardAutoRecoveryInterval | read-write | current | The interval in seconds used by BPDU guard auto recovery mechanism. |
| 1.3.6.1.4.1.259.10.1.5.1.5.3 | ScalarstaProtocolType | read-write | current | The version of Spanning Tree Protocol the bridge is currently running. The value 'stp(1)' indicates the Spanning Tree Protocol is as specified in IEEE 802.1D,'… |
| 1.3.6.1.4.1.259.10.1.5.1.5.4 | ScalarstaTxHoldCount | read-write | current | The value used by the Port Transmit state machine to limit the maximum transmission rate. |
| 1.3.6.1.4.1.259.10.1.5.1.5.5 | ScalarstaPathCostMethod | read-write | current | Indicates the type of spanning tree path cost mode configured on the switch. This mode applies to all instances of the spanning tree protocol running on the sw… |
| 1.3.6.1.4.1.259.10.1.5.1.5.6 | NodexstMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.5.6.1 | ScalarmstName | read-write | current | The name of the Multiple Spanning Tree region. |
| 1.3.6.1.4.1.259.10.1.5.1.5.6.2 | ScalarmstRevision | read-write | current | The Revision number of the Multiple Spanning Tree region. |
| 1.3.6.1.4.1.259.10.1.5.1.5.6.3 | ScalarmstMaxHops | read-write | current | The max hop number counts of the Multiple Spanning Tree region. |
| 1.3.6.1.4.1.259.10.1.5.1.5.6.4 | TablexstInstanceCfgTable | not-accessible | current | This table is used to configure the property of a specific instance in Multiple Spanning Tree or Rapid Spanning Tree. If Rapid Spanning Tree protocol is in use… |
| 1.3.6.1.4.1.259.10.1.5.1.5.6.4.1 | RowxstInstanceCfgEntry | not-accessible | current | A conceptual row containing the property of the RST or MST instance. |
| 1.3.6.1.4.1.259.10.1.5.1.5.6.4.1.1 | ColumnxstInstanceCfgIndex | not-accessible | current | An arbitrary integer within the range from 1 to the value of the maximum instance that uniquely identifies a spanning tree instance. |
| 1.3.6.1.4.1.259.10.1.5.1.5.6.4.1.2 | ColumnxstInstanceCfgPriority | read-write | current | The priority of a specific spanning tree instance. The value assigned should be in the range 0-61440 in steps of 4096. |
| 1.3.6.1.4.1.259.10.1.5.1.5.6.4.1.3 | ColumnxstInstanceCfgTimeSinceTopologyChange | read-only | current | The time (in hundredths of a second) since the last topology change detected by the bridge entity in RST or MST. |
| 1.3.6.1.4.1.259.10.1.5.1.5.6.4.1.4 | ColumnxstInstanceCfgTopChanges | read-only | current | The total number of topology changes detected by this bridge in RST or MST since the management entity was last reset or initialized. |
| 1.3.6.1.4.1.259.10.1.5.1.5.6.4.1.5 | ColumnxstInstanceCfgDesignatedRoot | read-only | current | The bridge identifier of the root of the spanning tree as determined by the Multiple Spanning Tree Protocol. (802.1s) or Rapid Spanning Tree Protocol (802.1w) … |
| 1.3.6.1.4.1.259.10.1.5.1.5.6.4.1.6 | ColumnxstInstanceCfgRootCost | read-only | current | The cost of the path to the root as seen from this bridge of the RST or MST. |
| 1.3.6.1.4.1.259.10.1.5.1.5.6.4.1.7 | ColumnxstInstanceCfgRootPort | read-only | current | The number of the port which offers the lowest cost path from this bridge to the root bridge of the RST or MST. |
| 1.3.6.1.4.1.259.10.1.5.1.5.6.4.1.8 | ColumnxstInstanceCfgMaxAge | read-only | current | The maximum age of Multiple Spanning Tree Protocol (802.1s) or Rapid Spanning Tree Protocol (802.1w) information learned from the network on any port before it… |
| 1.3.6.1.4.1.259.10.1.5.1.5.6.4.1.9 | ColumnxstInstanceCfgHelloTime | read-only | current | The amount of time between the transmission of configuration bridge PDUs by this node on any port when it is the root of the specific spanning tree or trying t… |
| 1.3.6.1.4.1.259.10.1.5.1.5.6.4.1.10 | ColumnxstInstanceCfgHoldTime | read-only | current | This time value determines the interval length during which no more than two configuration bridge PDUs shall be transmitted by this node, in units of hundredth… |
| 1.3.6.1.4.1.259.10.1.5.1.5.6.4.1.11 | ColumnxstInstanceCfgForwardDelay | read-only | current | For RST or MST protocol, this time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards … |
| 1.3.6.1.4.1.259.10.1.5.1.5.6.4.1.12 | ColumnxstInstanceCfgBridgeMaxAge | read-only | current | For RST or MST protocol, the time (in hundredths of second) that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 speci… |
| 1.3.6.1.4.1.259.10.1.5.1.5.6.4.1.13 | ColumnxstInstanceCfgBridgeHelloTime | read-only | current | For RST or MST protocol,the time (in hundredths of a second) that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this… |
| 1.3.6.1.4.1.259.10.1.5.1.5.6.4.1.14 | ColumnxstInstanceCfgBridgeForwardDelay | read-only | current | For RST or MST protocol, the time (in hundredths of a second) that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-19… |
| 1.3.6.1.4.1.259.10.1.5.1.5.6.4.1.15 | ColumnxstInstanceCfgTxHoldCount | read-only | current | For RST or MST protocol, the value used by the port transmit state machine to limit the maximum transmission rate. |
| 1.3.6.1.4.1.259.10.1.5.1.5.6.4.1.16 | ColumnxstInstanceCfgPathCostMethod | read-only | current | For RST or MST protocol, this indicates the type of spanning tree path cost mode used by the switch. The mode applies to all instances of the Spanning Tree pro… |
| 1.3.6.1.4.1.259.10.1.5.1.5.6.5 | TablexstInstancePortTable | not-accessible | current | The extension table for dot1dStpPortEntry to provide additional Spanning Tree information and configuration. |
| 1.3.6.1.4.1.259.10.1.5.1.5.6.5.1 | RowxstInstancePortEntry | not-accessible | current | The conceptual row for xstInstancePortTable. |
| 1.3.6.1.4.1.259.10.1.5.1.5.6.5.1.3 | ColumnxstInstancePortPriority | read-write | current | Defines the priority used for this port in the Spanning Tree Algorithm. If the path cost for all ports on a switch is the same, the port with the highest prior… |
| 1.3.6.1.4.1.259.10.1.5.1.5.6.5.1.4 | ColumnxstInstancePortState | read-only | current | The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame: discard… |
| 1.3.6.1.4.1.259.10.1.5.1.5.6.5.1.5 | ColumnxstInstancePortEnable | read-only | current | The enabled/disabled status of the port. |
| 1.3.6.1.4.1.259.10.1.5.1.5.6.5.1.7 | ColumnxstInstancePortDesignatedRoot | read-only | current | The unique bridge identifier of the bridge recorded as the root in the configuration BPDUs transmitted by the designated bridge for the segment to which the po… |
| 1.3.6.1.4.1.259.10.1.5.1.5.6.5.1.8 | ColumnxstInstancePortDesignatedCost | read-only | current | The path cost of the designated port of the segment connected to this port. This value is compared to the root path cost field in received bridge PDUs. |
| 1.3.6.1.4.1.259.10.1.5.1.5.6.5.1.9 | ColumnxstInstancePortDesignatedBridge | read-only | current | The bridge identifier of the bridge which this port considers to be the designated bridge for this port's segment. |
| 1.3.6.1.4.1.259.10.1.5.1.5.6.5.1.10 | ColumnxstInstancePortDesignatedPort | read-only | current | The port identifier of the port on the designated bridge for this port's segment. |
| 1.3.6.1.4.1.259.10.1.5.1.5.6.5.1.11 | ColumnxstInstancePortForwardTransitions | read-only | current | The number of times this port has transitioned from the learning state to the forwarding state. |
| 1.3.6.1.4.1.259.10.1.5.1.5.6.5.1.12 | ColumnxstInstancePortPortRole | read-only | current | The role of the port in the RST or MST protocol: (1) The port has no role within the spanning tree (2) The port is part of the active topology connecting the b… |
| 1.3.6.1.4.1.259.10.1.5.1.5.6.5.1.13 | ColumnxstInstancePortAdminPathCost | read-write | current | The admin value of the RST path cost or MST internal path cost, in the range of 1 to 200000000. 0 indicate the pathcost is dynamically determined by attribute … |
| 1.3.6.1.4.1.259.10.1.5.1.5.6.5.1.14 | ColumnxstInstancePortOperPathCost | read-only | current | The oper value of the RST pathcost or MST internal pathcost, in the range of 1 to 200000000. This parameter is used to determine the best path between devices.… |
| 1.3.6.1.4.1.259.10.1.5.1.5.6.6 | TablemstInstanceEditTable | not-accessible | current | The instance table for the Multiple Spanning Tree region |
| 1.3.6.1.4.1.259.10.1.5.1.5.6.6.1 | RowmstInstanceEditEntry | not-accessible | current | A conceptual row containing the status of the MSTP instance. |
| 1.3.6.1.4.1.259.10.1.5.1.5.6.6.1.1 | ColumnmstInstanceEditIndex | not-accessible | current | An arbitrary integer within the range from 1 to the value of the maximum instance that uniquely identifies a spanning tree instance. |
| 1.3.6.1.4.1.259.10.1.5.1.5.6.6.1.2 | ColumnmstInstanceEditVlansMap | read-create | current | A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with vlanIndex values of 0 through 7; the second octet to VLANs 8 through … |
| 1.3.6.1.4.1.259.10.1.5.1.5.6.6.1.3 | ColumnmstInstanceEditVlansMap2k | read-create | current | A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 1024 through 2047. The first octet corresponds to VLANs with vlanIndex values… |
| 1.3.6.1.4.1.259.10.1.5.1.5.6.6.1.4 | ColumnmstInstanceEditVlansMap3k | read-create | current | A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 2048 through 3071. The first octet corresponds to VLANs with vlanIndex values… |
| 1.3.6.1.4.1.259.10.1.5.1.5.6.6.1.5 | ColumnmstInstanceEditVlansMap4k | read-create | current | A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 3072 through 4095. The first octet corresponds to VLANs with vlanIndex values… |
| 1.3.6.1.4.1.259.10.1.5.1.5.6.6.1.6 | ColumnmstInstanceEditRemainingHops | read-only | current | The remaining hop count for this MST instance. |
| 1.3.6.1.4.1.259.10.1.5.1.5.6.7 | TablemstInstanceOperTable | not-accessible | current | The Multiple Spanning Tree region instance vlan mapped table. |
| 1.3.6.1.4.1.259.10.1.5.1.5.6.7.1 | RowmstInstanceOperEntry | not-accessible | current | A conceptual row containing the status of the MSTP instance. |
| 1.3.6.1.4.1.259.10.1.5.1.5.6.7.1.1 | ColumnmstInstanceOperIndex | not-accessible | current | An arbitrary integer within the range from 1 to the value of the maximum instance that uniquely identifies a spanning tree instance. |
| 1.3.6.1.4.1.259.10.1.5.1.5.6.7.1.2 | ColumnmstInstanceOperVlansMap | read-only | current | A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with vlanIndex values of 0 through 7; the second octet to VLANs 8 through … |
| 1.3.6.1.4.1.259.10.1.5.1.5.6.7.1.3 | ColumnmstInstanceOperVlansMap2k | read-only | current | A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 1024 through 2047. The first octet corresponds to VLANs with vlanIndex values… |
| 1.3.6.1.4.1.259.10.1.5.1.5.6.7.1.4 | ColumnmstInstanceOperVlansMap3k | read-only | current | A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 2048 through 3071. The first octet corresponds to VLANs with vlanIndex values… |
| 1.3.6.1.4.1.259.10.1.5.1.5.6.7.1.5 | ColumnmstInstanceOperVlansMap4k | read-only | current | A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 3072 through 4095. The first octet corresponds to VLANs with vlanIndex values… |
| 1.3.6.1.4.1.259.10.1.5.1.5.8 | TablestaLoopbackDetectionPortTable | not-accessible | current | A table provides the mechanism to configure the spanning tree loopback detection of each port or trunk |
| 1.3.6.1.4.1.259.10.1.5.1.5.8.1 | RowstaLoopbackDetectionPortEntry | not-accessible | current | A conceptual row of staLoopbackDetectionPortTable. |
| 1.3.6.1.4.1.259.10.1.5.1.5.8.1.1 | ColumnstaLoopbackDetectionPortIfIndex | not-accessible | current | The port and the trunk interfaces of the portTable. The interface identified by a particular value of this index is the same interface as identified by the sam… |
| 1.3.6.1.4.1.259.10.1.5.1.5.8.1.2 | ColumnstaLoopbackDetectionPortStatus | read-write | current | Status of the port on whether spanning tree loopback detection is enabled. |
| 1.3.6.1.4.1.259.10.1.5.1.5.8.1.3 | ColumnstaLoopbackDetectionPortTrapStatus | read-write | current | The parameter indicates whether the trap has to be sent when the loopback BPDUs have been detected. |
| 1.3.6.1.4.1.259.10.1.5.1.5.8.1.4 | ColumnstaLoopbackDetectionPortReleaseMode | read-write | current | Setting it to auto(1) indicates that this port can be released from discarding state automatically after loopback has occurred. Setting it to manual(2) indicat… |
| 1.3.6.1.4.1.259.10.1.5.1.5.8.1.5 | ColumnstaLoopbackDetectionPortRelease | read-write | current | Set this to release(2) to release the port from discarding state. noRelease(1) will always be obtained when reading this variable. |
| 1.3.6.1.4.1.259.10.1.5.1.5.9 | ScalarstaSystemBPDUFlooding | read-write | current | Global BPDU flooding behavior configuration. When BPDU is received on spanning tree disabled port. (1) BPDU is flooded to all other spanning tree disabled port… |
| 1.3.6.1.4.1.259.10.1.5.1.7 | NoderestartMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.7.1 | ScalarrestartOpCodeFile | read-write | current | Name of op-code file for start-up. |
| 1.3.6.1.4.1.259.10.1.5.1.7.2 | ScalarrestartConfigFile | read-write | current | Name of configuration file for start-up. |
| 1.3.6.1.4.1.259.10.1.5.1.7.3 | ScalarrestartControl | read-write | current | Setting this object to warmBoot(2) causes the device to reinitialize itself such that neither the agent configuration nor the protocol entity implementation is… |
| 1.3.6.1.4.1.259.10.1.5.1.8 | NodemirrorMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.8.1 | TablemirrorTable | not-accessible | current | Table for port mirroring, enabling a port to be mirrored to/from another port. Not all ports can be mirrored and limitations may apply as to which ports can be… |
| 1.3.6.1.4.1.259.10.1.5.1.8.1.1 | RowmirrorEntry | not-accessible | current | The conceptual row of mirrorTable. |
| 1.3.6.1.4.1.259.10.1.5.1.8.1.1.1 | ColumnmirrorDestinationPort | not-accessible | current | The destination port interface for mirrored packets. The interface identified by a particular value of this index is the same interface as identified by the sa… |
| 1.3.6.1.4.1.259.10.1.5.1.8.1.1.2 | ColumnmirrorSourcePort | not-accessible | current | The source port interface for mirrored packets. The interface identified by a particular value of this index is the same interface as identified by the same va… |
| 1.3.6.1.4.1.259.10.1.5.1.8.1.1.3 | ColumnmirrorType | read-create | current | If this value is rx(1), receive packets will be mirrored. If this value is tx(2), transmit packets will be mirrored. If this value is both(3), both receive and… |
| 1.3.6.1.4.1.259.10.1.5.1.8.1.1.4 | ColumnmirrorStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.259.10.1.5.1.9 | NodeigmpSnoopMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.9.1 | ScalarigmpSnoopStatus | read-write | current | Parameter to enable or disable IGMP snooping on the device. When enabled, the device will examine IGMP packets and set up filters for IGMP ports. |
| 1.3.6.1.4.1.259.10.1.5.1.9.2 | ScalarigmpSnoopQuerier | read-write | current | Enables (disables) whether the switch acts as an IGMP querier. |
| 1.3.6.1.4.1.259.10.1.5.1.9.6 | ScalarigmpSnoopRouterPortExpireTime | read-write | current | Sets the time (in seconds) the switch waits after the previous querier has stopped querying before the router port (which received query packets from previous … |
| 1.3.6.1.4.1.259.10.1.5.1.9.7 | ScalarigmpSnoopVersion | read-write | current | IGMP version snooped |
| 1.3.6.1.4.1.259.10.1.5.1.9.8 | TableigmpSnoopRouterCurrentTable | not-accessible | current | Table for current router ports. |
| 1.3.6.1.4.1.259.10.1.5.1.9.8.1 | RowigmpSnoopRouterCurrentEntry | not-accessible | current | Entry for current router ports. |
| 1.3.6.1.4.1.259.10.1.5.1.9.8.1.1 | ColumnigmpSnoopRouterCurrentVlanIndex | not-accessible | current | The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The e… |
| 1.3.6.1.4.1.259.10.1.5.1.9.8.1.2 | ColumnigmpSnoopRouterCurrentPorts | read-only | current | The set of ports which are current router ports, including static router ports. Please refer to igmpSnoopRouterStaticTable. |
| 1.3.6.1.4.1.259.10.1.5.1.9.8.1.3 | ColumnigmpSnoopRouterCurrentStatus | read-only | current | The set of ports which are static multicast router ports. |
| 1.3.6.1.4.1.259.10.1.5.1.9.9 | TableigmpSnoopRouterStaticTable | not-accessible | current | Table for static router ports. |
| 1.3.6.1.4.1.259.10.1.5.1.9.9.1 | RowigmpSnoopRouterStaticEntry | not-accessible | current | Entry for static router ports. |
| 1.3.6.1.4.1.259.10.1.5.1.9.9.1.1 | ColumnigmpSnoopRouterStaticVlanIndex | not-accessible | current | The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The e… |
| 1.3.6.1.4.1.259.10.1.5.1.9.9.1.2 | ColumnigmpSnoopRouterStaticPorts | read-create | current | The set of ports which are static router ports. |
| 1.3.6.1.4.1.259.10.1.5.1.9.9.1.3 | ColumnigmpSnoopRouterStaticStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.259.10.1.5.1.9.11 | TableigmpSnoopMulticastStaticTable | not-accessible | current | Table for static multicast addresses. |
| 1.3.6.1.4.1.259.10.1.5.1.9.11.1 | RowigmpSnoopMulticastStaticEntry | not-accessible | current | Entry for static multicast addresses. |
| 1.3.6.1.4.1.259.10.1.5.1.9.11.1.1 | ColumnigmpSnoopMulticastStaticVlanIndex | not-accessible | current | The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The e… |
| 1.3.6.1.4.1.259.10.1.5.1.9.11.1.2 | ColumnigmpSnoopMulticastStaticIpAddress | not-accessible | current | IP address of multicast group. |
| 1.3.6.1.4.1.259.10.1.5.1.9.11.1.3 | ColumnigmpSnoopMulticastStaticPorts | read-create | current | The set of ports which are members. |
| 1.3.6.1.4.1.259.10.1.5.1.9.11.1.4 | ColumnigmpSnoopMulticastStaticStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.259.10.1.5.1.9.14 | TableigmpSnoopCurrentVlanTable | not-accessible | current | Table for configuring IGMP snooping for each VLAN which exists in the device by (local or network) management, or dynamically created as a result of GVRP reque… |
| 1.3.6.1.4.1.259.10.1.5.1.9.14.1 | RowigmpSnoopCurrentVlanEntry | not-accessible | current | Entry for configuring IGMP snooping. |
| 1.3.6.1.4.1.259.10.1.5.1.9.14.1.1 | ColumnigmpSnoopCurrentVlanIndex | not-accessible | current | Same is dot1qVlanIndex in the Q-BRIDGE-MIB. This table has only one entry - the entry for the VLAN of the management interface. |
| 1.3.6.1.4.1.259.10.1.5.1.9.14.1.2 | ColumnigmpSnoopCurrentVlanStatus | read-write | current | Parameter to enable or disable IGMP snooping on this VLAN. When enabled, the device will examine IGMP packets and set up filters for IGMP ports. |
| 1.3.6.1.4.1.259.10.1.5.1.9.14.1.3 | ColumnigmpSnoopCurrentVlanImmediateLeave | read-write | current | The parameter to enable or disable the Immediate-Leave feature on this VLAN. |
| 1.3.6.1.4.1.259.10.1.5.1.9.14.1.4 | ColumnigmpSnoopCurrentVlanGeneralQuerySuppression | read-write | current | The parameter to enable or disable the general query suppresion on this VLAN. |
| 1.3.6.1.4.1.259.10.1.5.1.9.14.1.5 | ColumnigmpSnoopCurrentVlanLastMemQueryCount | read-write | current | Represents the number of queries sent by the switch before it assumes there are no local members. |
| 1.3.6.1.4.1.259.10.1.5.1.9.14.1.6 | ColumnigmpSnoopCurrentVlanLastMemQueryIntvl | read-write | current | The last member query interval is the max response time inserted into group-specific queries sent in response to leave group messages,and is also the the max r… |
| 1.3.6.1.4.1.259.10.1.5.1.9.14.1.7 | ColumnigmpSnoopCurrentVlanProxyAddress | read-write | current | Represents the address of queries sent by the switch. |
| 1.3.6.1.4.1.259.10.1.5.1.9.14.1.8 | ColumnigmpSnoopCurrentVlanQueryIntvl | read-write | current | Represents the query interval of queries sent by the switch. |
| 1.3.6.1.4.1.259.10.1.5.1.9.14.1.9 | ColumnigmpSnoopCurrentVlanQueryRespIntvl | read-write | current | Represents the query response interval of queries sent by the switch. |
| 1.3.6.1.4.1.259.10.1.5.1.9.14.1.10 | ColumnigmpSnoopCurrentVlanProxyReporting | read-write | current | Set this variable to enabled(1) to enable the feature. Set this variable to disabled(2) to disable the feature. Set this variable to default(3), the status of … |
| 1.3.6.1.4.1.259.10.1.5.1.9.14.1.11 | ColumnigmpSnoopCurrentVlanVersion | read-write | current | the version of igmp packets is supported by this vlan. |
| 1.3.6.1.4.1.259.10.1.5.1.9.14.1.12 | ColumnigmpSnoopCurrentVlanVersionExclusive | read-write | current | Enable/disable control of the IGMP Snooping exclusive supported version. |
| 1.3.6.1.4.1.259.10.1.5.1.9.15 | TableigmpSnoopMulticastGroupTable | not-accessible | current | Table for current multicast addresses. |
| 1.3.6.1.4.1.259.10.1.5.1.9.15.1 | RowigmpSnoopMulticastGroupEntry | not-accessible | current | Entry for Group multicast addresses. |
| 1.3.6.1.4.1.259.10.1.5.1.9.15.1.1 | ColumnigmpSnoopMulticastGroupVlanIndex | not-accessible | current | The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The e… |
| 1.3.6.1.4.1.259.10.1.5.1.9.15.1.2 | ColumnigmpSnoopMulticastGroupIpAddress | not-accessible | current | IP address of multicast group. |
| 1.3.6.1.4.1.259.10.1.5.1.9.15.1.3 | ColumnigmpSnoopMulticastGroupSourceIPAddress | not-accessible | current | Source IP address of source. |
| 1.3.6.1.4.1.259.10.1.5.1.9.15.1.4 | ColumnigmpSnoopMulticastGroupPorts | read-only | current | The set of ports which are members of a multicast group, including static members. Please refer to igmpSnoopMulticastStaticTable. |
| 1.3.6.1.4.1.259.10.1.5.1.9.15.1.5 | ColumnigmpSnoopMulticastGroupStatus | read-only | current | The set of ports which are static IGMP member ports. |
| 1.3.6.1.4.1.259.10.1.5.1.9.27 | TableigmpSnoopPortTable | not-accessible | current | Table of IGMP Snooping service per port. |
| 1.3.6.1.4.1.259.10.1.5.1.9.27.1 | RowigmpSnoopPortEntry | not-accessible | current | Entry of IGMP Snooping service per port. |
| 1.3.6.1.4.1.259.10.1.5.1.9.27.1.1 | ColumnigmpSnoopPortIndex | not-accessible | current | The port and the trunk (excluding trunk members) interface of the igmpSnoopPortTable. The interface identified by a particular value of this index is the same … |
| 1.3.6.1.4.1.259.10.1.5.1.9.27.1.3 | ColumnigmpSnoopQueryDrop | read-write | current | Parameter to enable or disable dropping IGMP Query packet. |
| 1.3.6.1.4.1.259.10.1.5.1.9.27.1.4 | ColumnigmpSnoopMulticastDataDrop | read-write | current | Parameter to enable or disable dropping IP multicast data |
| 1.3.6.1.4.1.259.10.1.5.1.9.28 | NodeigmpSnoopGlobalMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.9.28.1 | ScalarigmpSnoopProxyReporting | read-write | current | Parameter to enable or disable IGMP snooping proxy reporting on the device. |
| 1.3.6.1.4.1.259.10.1.5.1.9.28.2 | ScalarigmpSnoopRouterAlertOptionCheck | read-write | current | Parameter to enable or disable IGMP snooping router alert option check on the device. |
| 1.3.6.1.4.1.259.10.1.5.1.9.28.3 | ScalarigmpSnoopTcnFlood | read-write | current | Parameter to enable or disable IGMP snooping tcn flood on the device. |
| 1.3.6.1.4.1.259.10.1.5.1.9.28.4 | ScalarigmpSnoopTcnQuerySolicit | read-write | current | Parameter to enable or disable IGMP snooping tcn query solicit on the device. |
| 1.3.6.1.4.1.259.10.1.5.1.9.28.5 | ScalarigmpSnoopUnregisteredDataFlood | read-write | current | Parameter to enable or disable IGMP snooping Unregistered data flood solicit on the device. |
| 1.3.6.1.4.1.259.10.1.5.1.9.28.6 | ScalarigmpSnoopUnsolicitedReportInterval | read-write | current | Setting this value to specify how long (in seconds) the uplink ports should transmit unsolicited reports. |
| 1.3.6.1.4.1.259.10.1.5.1.9.28.7 | ScalarigmpSnoopVersionExclusive | read-write | current | Parameter to enable or disable IGMP snooping version exclusive on the device. |
| 1.3.6.1.4.1.259.10.1.5.1.10 | NodeipMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.10.2 | ScalarnetDefaultGateway | read-write | current | The IP Address of the default gateway. If this value is undefined or unknown, it shall have the value 0.0.0.0. |
| 1.3.6.1.4.1.259.10.1.5.1.10.3 | ScalaripHttpState | read-write | current | Whether HTTP is enabled. |
| 1.3.6.1.4.1.259.10.1.5.1.10.4 | ScalaripHttpPort | read-write | current | The port number for HTTP. |
| 1.3.6.1.4.1.259.10.1.5.1.10.5 | ScalaripDhcpRestart | read-write | current | When set to restart(1) the DHCP server will restart. When read, this value always returns noRestart(2). |
| 1.3.6.1.4.1.259.10.1.5.1.10.6 | ScalaripHttpsState | read-write | current | Whether HTTPS is enabled. |
| 1.3.6.1.4.1.259.10.1.5.1.10.7 | ScalaripHttpsPort | read-write | current | The port number for HTTPS. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11 | NodedhcpMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.10.11.1 | NodedhcpClient | |||
| 1.3.6.1.4.1.259.10.1.5.1.10.11.1.1 | NodedhcpcOptions | |||
| 1.3.6.1.4.1.259.10.1.5.1.10.11.1.1.1 | TabledhcpcInterfaceTable | not-accessible | current | Table for DHCP client information listed by interface. Depending on the nature of the product, this table may have only one entry(e.g. for the management VLAN)… |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.1.1.1.1 | RowdhcpcInterfaceEntry | not-accessible | current | Entry for DHCP client information listed by interface. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.1.1.1.1.1 | ColumndhcpcIfIndex | not-accessible | current | This is defined by ifIndex in the IF-MIB.(static vlan if index) |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.1.1.1.1.2 | ColumndhcpcIfClientIdMode | read-write | current | Whether the Client ID is in text mode or in Hex mode. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.1.1.1.1.3 | ColumndhcpcIfClientId | read-write | current | The value that the DHCP client sets in the client_id option of DHCPDISCOVER and DHCPREQUEST messages. This value may be used by DHCP servers to uniquely identi… |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.1.1.1.1.4 | ColumndhcpcIfVendorClassIdMode | read-write | current | Whether the vendor class ID is in text mode or in Hex mode. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.1.1.1.1.5 | ColumndhcpcIfVendorClassId | read-write | current | The value that the DHCP client sets in the vendor class_id option of DHCPDISCOVER and DHCPREQUEST messages. This value may be used by DHCP servers to identify … |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.2 | NodedhcpRelay | |||
| 1.3.6.1.4.1.259.10.1.5.1.10.11.2.2 | TabledhcpRelayServerAddrTable | not-accessible | current | The role of the DHCP relay agent is to forward requests and replies between server and client when they are not in the same subnet. To enable DHCP relay servic… |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.2.2.1 | RowdhcpRelayServerAddrEntry | not-accessible | current | A conceptual row of dhcpRelayServerAddrTable. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.2.2.1.1 | ColumndhcpRelayServerAddrIfIndex | not-accessible | current | The VLAN interface being used by this table entry. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.2.2.1.2 | ColumndhcpRelayServerAddrIndex | not-accessible | current | The index of the relay server IP address. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.2.2.1.3 | ColumndhcpRelayServerAddrServerIp | read-write | current | The IP address of the relay server. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.2.3 | ScalardhcpRelayRestart | read-write | current | Set this object to restart(1) to restart DCHP Relay. Always get noRestart(2) when you read this variable. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.2.4 | TabledhcpRelayServerInetAddrTable | not-accessible | current | The role of DHCP Relay Agent is to forward requests and replies between server and client when they are not in the same subnet. To enable DHCP Relay service us… |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.2.4.1 | RowdhcpRelayServerInetAddrEntry | not-accessible | current | A conceptual row of dhcpRelayServerAddrTable. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.2.4.1.1 | ColumndhcpRelayServerInetAddrIfIndex | not-accessible | current | The VLAN interface being used by this table entry. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.2.4.1.2 | ColumndhcpRelayServerInetAddrIndex | not-accessible | current | The Index of the Relay server IP address. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.2.4.1.3 | ColumndhcpRelayServerInetAddressType | read-write | current | The INET address type of the relay server. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.2.4.1.4 | ColumndhcpRelayServerInetAddress | read-write | current | The INET address of the relay server. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3 | NodedhcpServerMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.1 | TabledhcpPoolTable | not-accessible | current | A dhcp pool is a collection of user configuration such as option config-lease time or dns-server IPs, a network address for network pool, or a host IP plus a h… |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.1.1 | RowdhcpPoolEntry | not-accessible | current | A conceptual row of dhcpPoolTable. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.1.1.1 | ColumndhcpPoolPoolName | not-accessible | current | PoolName, simply specify a string which string size NO MORE THAN 8 |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.1.1.2 | ColumndhcpPoolPoolType | read-create | current | Pool Type: notSpecify(1); netWork(2);host(3) |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.1.1.3 | ColumndhcpPoolPoolAddress | read-create | current | Pool Address |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.1.1.4 | ColumndhcpPoolSubnetMask | read-create | current | Subnet Mask |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.1.1.5 | ColumndhcpPoolHardwareType | read-create | current | Hardware type: notSpecify(1); ethernet(2); ieee802(3); fddi(4) |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.1.1.6 | ColumndhcpPoolMacAddress | read-create | current | MAC address |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.1.1.7 | ColumndhcpPoolstatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.2 | TabledhcpPoolOptionTable | not-accessible | current | This is the Option table of the dhcpPoolTable, user can specify Options configuration in this table |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.2.1 | RowdhcpPoolOptionEntry | not-accessible | current | A conceptual row of dhcpPoolOptionTable. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.2.1.1 | ColumndhcpPoolOptionPoolName | not-accessible | current | PoolName, simply specify a string which string size NO MORE THAN 8 |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.2.1.2 | ColumndhcpPoolOptionNextServer | read-write | current | Specifies the IP address of the next server in the boot process, which is typically a Trivial File Transfer Protocol(TFTP) server. One IP address is required. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.2.1.3 | ColumndhcpPoolOptionNetbiosNodeType | read-write | current | Specifies the NetBIOS node type. Valid types are: none(1) b-node(2) - Broadcast p-node(3) - Peer-to-peer m-node(4) - Mixed h-node(5) - Hybrid. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.2.1.4 | ColumndhcpPoolOptionDomainName | read-write | current | Specifies the domain name string. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.2.1.5 | ColumndhcpPoolOptionBootFile | read-write | current | To specify the name of the default boot image. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.2.1.6 | ColumndhcpPoolOptionLeaseTime | read-write | current | To configure the duration of the lease, in seconds, of an IP address that is assigned from a DHCP Server to a DHCP client. Valid values are from 1 to 31536000 … |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.2.1.7 | ColumndhcpPoolOptionCidMode | read-write | current | Set this variable to text(2) of hex(3) to specify the mode of the Client Id, which is useful for CLI to determine the display way of the Client Id. You will ge… |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.2.1.8 | ColumndhcpPoolOptionCidBuffer | read-write | current | Content of Client Id. You MUST specify the dhcpPoolOptionCidMode before setting this variable. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.3 | TabledhcpPoolOptionDnsSerTable | not-accessible | current | To specify the DNS IP servers available to a DHCP client, you can specify up to two addresses for each DHCP pool. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.3.1 | RowdhcpPoolOptionDnsSerEntry | not-accessible | current | A conceptual row of dhcpPoolOptionDnsSerTable. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.3.1.1 | ColumndhcpPoolOptionDnsSerPoolName | not-accessible | current | PoolName, simply specify a string which string size NO MORE THAN 8 |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.3.1.2 | ColumndhcpPoolOptionDnsSerIndex | not-accessible | current | Index of the DNS server. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.3.1.3 | ColumndhcpPoolOptionDnsSerIpAddress | read-write | current | Ip address of the DNS server. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.4 | TabledhcpPoolOptDefaultRouterTable | not-accessible | current | Specifices the default router list for a DHCP Client, you can specify up to two addresses for each DHCP pool. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.4.1 | RowdhcpPoolOptDefaultRouterEntry | not-accessible | current | A conceptual row of dhcpPoolOptDefaultRouterTable. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.4.1.1 | ColumndhcpPoolOptDefaultRouterPoolName | not-accessible | current | PoolName, simply specify a string which string size NO MORE THAN 8 |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.4.1.2 | ColumndhcpPoolOptDefaultRouterIndex | not-accessible | current | Index of the default router. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.4.1.3 | ColumndhcpPoolOptDefaultRouterIpAddress | read-write | current | Specifies the IP address of a router. One IP address is required. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.5 | TabledhcpPoolOptNetbiosServerTable | not-accessible | current | To configure the NetBIOS WINS name servers that are available to DHCP clients. You can specify up to eight addressed for each DHCP pool. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.5.1 | RowdhcpPoolOptNetbiosServerEntry | not-accessible | current | A conceptual row of dhcpPoolOptNetbiosServerTable. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.5.1.1 | ColumndhcpPoolOptNetbiosServerPoolName | not-accessible | current | PoolName, simply specify a string which string size NO MORE THAN 8 |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.5.1.2 | ColumndhcpPoolOptNetbiosServerIndex | not-accessible | current | Index of the Netbios name Server. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.5.1.3 | ColumndhcpPoolOptNetbiosServerIpAddress | read-write | current | Specifies the IP address of the NetBIOS WINS name server. One IP address is required. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.6 | TabledhcpServerExcludedIpAddrTable | not-accessible | current | To specify IP addresses that a DHCP Server shuld not assign to DHCP clients. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.6.1 | RowdhcpServerExcludedIpAddrEntry | not-accessible | current | A conceptual row of dhcpServerExcludedIpAddrTable. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.6.1.1 | ColumndhcpServerExcludedIpAddrLowIp | not-accessible | current | The excluded IP address, or first IP address in an excluded address range. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.6.1.2 | ColumndhcpServerExcludedIpAddrHiIp | not-accessible | current | The last IP address in the excluded address range. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.6.1.3 | ColumndhcpServerExcludedIpAddrStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.7 | TabledhcpServerLeaseBindingTable | not-accessible | current | To configure the address bindings on the DHCP server. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.7.1 | RowdhcpServerLeaseBindingEntry | not-accessible | current | A conceptual row of dhcpServerLeaseBindingTable. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.7.1.1 | ColumndhcpServerLeaseBindingIp | not-accessible | current | The IP address of the host as recorded on the DHCP Server. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.7.1.2 | ColumndhcpServerLeaseBindingMac | read-only | current | The MAC address of the host as recorded on the DHCP Server. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.7.1.3 | ColumndhcpServerLeaseBindingLeaseTime | read-only | current | The lease expiration date of the IP address of the host. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.7.1.4 | ColumndhcpServerLeaseBindingStartTime | read-only | current | Show current system real time in sec. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.7.1.5 | ColumndhcpServerLeaseBindingStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.8 | ScalardhcpServerServiceStatus | read-write | current | Setting this to 1 to enable the dhcp server service. Setting this to 2 to disable the dhcp server service. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.9 | TabledhcpPoolInetTable | not-accessible | current | A DHCP pool is a collection of user configuration such as option config-lease time or DNS-server IPs, a network address for network pool, or a host IP plus a h… |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.9.1 | RowdhcpPoolInetEntry | not-accessible | current | A conceptual row of dhcpPoolInetTable. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.9.1.1 | ColumndhcpPoolInetPoolName | not-accessible | current | Pool name, simply specify a string with its length NO MORE THAN 8. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.9.1.2 | ColumndhcpPoolInetPoolType | read-create | current | Pool type: notSpecify(1), netWork(2), host(3). |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.9.1.3 | ColumndhcpPoolInetAddressType | read-create | current | Pool address type |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.9.1.4 | ColumndhcpPoolInetAddress | read-create | current | Pool address |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.9.1.5 | ColumndhcpPoolInetSubnetMaskType | read-create | current | subnet mask type |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.9.1.6 | ColumndhcpPoolInetSubnetMask | read-create | current | subnet mask |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.9.1.7 | ColumndhcpPoolInetHardwareType | read-create | current | Hardware type: notSpecify(1), ethernet(2), ieee802(3) ,fddi(4). |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.9.1.8 | ColumndhcpPoolInetMacAddress | read-create | current | MAC address. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.9.1.9 | ColumndhcpPoolInetStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.10 | TabledhcpPoolInetOptionTable | not-accessible | current | This is the Option table of the dhcpPoolTable, user can specify options configuration in this table. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.10.1 | RowdhcpPoolInetOptionEntry | not-accessible | current | A conceptual row of dhcpPoolOptionTable. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.10.1.1 | ColumndhcpPoolInetOptionPoolName | not-accessible | current | Pool name, simply specify a string with its length NO MORE THAN 8. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.10.1.2 | ColumndhcpPoolInetOptionNextServerAddrType | read-write | current | Specifies the INET address type of the next server in the boot process. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.10.1.3 | ColumndhcpPoolInetOptionNextServerAddr | read-write | current | Specifies the INET address of the next server in the boot process, which is typically a Trivial File Transfer Protocol(TFTP) server. One INET address is requir… |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.10.1.4 | ColumndhcpPoolInetOptionNetbiosNodeType | read-write | current | Specifies the NetBIOS node type. Valid types are: none(1) b-node(2) - Broadcast p-node(3) - Peer-to-peer m-node(4) - Mixed h-node(5) - Hybrid. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.10.1.5 | ColumndhcpPoolInetOptionDomainName | read-write | current | Specifies the domain name string. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.10.1.6 | ColumndhcpPoolInetOptionBootFile | read-write | current | To specify the name of the default boot image. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.10.1.7 | ColumndhcpPoolInetOptionLeaseTime | read-write | current | To configure the duration of the lease, in seconds, of an IP address that is assigned from a DHCP Server to a DHCP client. Valid values are from 1 to 31536000 … |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.10.1.8 | ColumndhcpPoolInetOptionCidMode | read-write | current | Set this variable to text(2) or hex(3) to specify the mode of the client ID, which is useful for CLI to determine the display format of the client ID. The orig… |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.10.1.9 | ColumndhcpPoolInetOptionCidBuffer | read-write | current | Content of Client Id. dhcpPoolOptionCidMode MUST be specified before setting this variable. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.11 | TabledhcpPoolInetOptionDnsSerTable | not-accessible | current | To specify the DNS IP servers available to a DHCP client, you can specify up to two addresses for each DHCP pool. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.11.1 | RowdhcpPoolInetOptionDnsSerEntry | not-accessible | current | A conceptual row of dhcpPoolOptionDnsSerTable. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.11.1.1 | ColumndhcpPoolInetOptionDnsSerPoolName | not-accessible | current | Pool name, simply specify a string with its length NO MORE THAN 8. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.11.1.2 | ColumndhcpPoolInetOptionDnsSerIndex | not-accessible | current | Index of the DNS server. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.11.1.3 | ColumndhcpPoolInetOptionDnsSerAddrType | read-write | current | INET address type of the DNS server. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.11.1.4 | ColumndhcpPoolInetOptionDnsSerAddr | read-write | current | INET address of the DNS server. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.12 | TabledhcpPoolOptInetDefaultRouterTable | not-accessible | current | Specifies the default router list for a DHCP Client, you can specify up to two addresses for each DHCP pool. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.12.1 | RowdhcpPoolOptInetDefaultRouterEntry | not-accessible | current | A conceptual row of dhcpPoolOptDefaultRouterTable. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.12.1.1 | ColumndhcpPoolOptInetDefaultRouterPoolName | not-accessible | current | Pool name, simply specify a string with its length NO MORE THAN 8. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.12.1.2 | ColumndhcpPoolOptInetDefaultRouterIndex | not-accessible | current | Index of the default router. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.12.1.3 | ColumndhcpPoolOptInetDefaultRouterAddrType | read-write | current | Specifies the INET address type of a router. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.12.1.4 | ColumndhcpPoolOptInetDefaultRouterAddr | read-write | current | Specifies the INET address of a router. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.13 | TabledhcpPoolOptInetNetbiosServerTable | not-accessible | current | To configure the NetBIOS WINS name servers that are available to DHCP clients. You can specify up to eight addressed for each DHCP pool. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.13.1 | RowdhcpPoolOptInetNetbiosServerEntry | not-accessible | current | A conceptual row of dhcpPoolOptNetbiosServerTable. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.13.1.1 | ColumndhcpPoolOptInetNetbiosServerPoolName | not-accessible | current | Pool name, simply specify a string with its length NO MORE THAN 8 |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.13.1.2 | ColumndhcpPoolOptInetNetbiosServerIndex | not-accessible | current | Index of the NetBIOS name Server. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.13.1.3 | ColumndhcpPoolOptInetNetbiosServerAddrType | read-write | current | Specifies the INET address type of the NetBIOS WINS name server. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.13.1.4 | ColumndhcpPoolOptInetNetbiosServerAddr | read-write | current | Specifies the INET address of the NetBIOS WINS name server. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.14 | TabledhcpServerExcludedInetAddrTable | not-accessible | current | To specify IP addresses that a DHCP Server should not assign to DHCP clients. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.14.1 | RowdhcpServerExcludedInetAddrEntry | not-accessible | current | A conceptual row of dhcpServerExcludedIpAddrTable. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.14.1.1 | ColumndhcpServerExcludedInetAddrLowAddrType | not-accessible | current | The excluded INET address type, or first INET address type in an excluded address range. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.14.1.2 | ColumndhcpServerExcludedInetAddrLowAddr | not-accessible | current | The excluded INET address, or first INET address in an excluded address range. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.14.1.3 | ColumndhcpServerExcludedInetAddrHighAddrType | not-accessible | current | The last INET address type in the excluded address range. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.14.1.4 | ColumndhcpServerExcludedInetAddrHighAddr | not-accessible | current | The last INET address in the excluded address range. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.14.1.5 | ColumndhcpServerExcludedInetAddrStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.15 | TabledhcpServerInetLeaseBindingTable | not-accessible | current | To configure the address bindings on the DHCP server. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.15.1 | RowdhcpServerInetLeaseBindingEntry | not-accessible | current | A conceptual row of dhcpServerLeaseBindingTable. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.15.1.1 | ColumndhcpServerInetLeaseBindingAddrType | not-accessible | current | The INET address type of the host as recorded on the DHCP server. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.15.1.2 | ColumndhcpServerInetLeaseBindingAddr | not-accessible | current | The INET address of the host as recorded on the DHCP server. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.15.1.3 | ColumndhcpServerInetLeaseBindingMac | read-only | current | The MAC address of the host as recorded on the DHCP Server. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.15.1.4 | ColumndhcpServerInetLeaseBindingLeaseTime | read-only | current | The lease expiration date of the INET address of the host. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.15.1.5 | ColumndhcpServerInetLeaseBindingStartTime | read-only | current | Show current system real time in sec. |
| 1.3.6.1.4.1.259.10.1.5.1.10.11.3.15.1.6 | ColumndhcpServerInetLeaseBindingStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.259.10.1.5.1.10.15 | NodepingMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.10.15.1 | ScalarpingIpAddress | read-write | current | Specifies the IP address of the device that is planned to ping. |
| 1.3.6.1.4.1.259.10.1.5.1.10.15.2 | ScalarpingPacketSize | read-write | current | Specifies the size of each data potion of ping packets in bytes. |
| 1.3.6.1.4.1.259.10.1.5.1.10.15.4 | ScalarpingCompleted | read-only | current | A value of true(1) will be read when this ping operation has been either responded to or changed to the time-out status. A value of false(2) will be read when … |
| 1.3.6.1.4.1.259.10.1.5.1.10.15.5 | ScalarpingAction | read-write | current | The action of the pingMgt operation. Sets these objects to pingStart(2) to begin the ping operation. Once the action is set to pingStart(2), the associated pin… |
| 1.3.6.1.4.1.259.10.1.5.1.10.15.6 | ScalarpingProbeCount | read-write | current | Specifies the number of times to perform a ping operation at a remote host. |
| 1.3.6.1.4.1.259.10.1.5.1.10.15.7 | ScalarpingSentPackets | read-only | current | The value of this object reflects the number of probes sent. The value of this object must be reported as 0 when no probes have been sent. |
| 1.3.6.1.4.1.259.10.1.5.1.10.15.8 | ScalarpingReceivedPackets | read-only | current | Number of responses received. The value of this object must be reported as 0 when no probe responses have been received. |
| 1.3.6.1.4.1.259.10.1.5.1.10.15.9 | ScalarpingPacketLossRate | read-only | current | Packet loss rate of this ping operation. This variable is calculated by pingReceivedPackets and pingSentPackets. The rate is expressed as a percentage. |
| 1.3.6.1.4.1.259.10.1.5.1.10.15.10 | TablepingHistoryTable | not-accessible | current | Contains the executive result information for the ping operation. |
| 1.3.6.1.4.1.259.10.1.5.1.10.15.10.1 | RowpingHistoryEntry | not-accessible | current | A conceptual row in the pingHistory table. |
| 1.3.6.1.4.1.259.10.1.5.1.10.15.10.1.1 | ColumnpingHistoryIndex | not-accessible | current | A new entry in this table is created when the result of a ping probe is determined. The old entries will be cleared when a new ping action is started. |
| 1.3.6.1.4.1.259.10.1.5.1.10.15.10.1.2 | ColumnpingHistoryResponse | read-only | current | This variable represents the round trip time and is measured in milliseconds. The variable is the difference between received time and sent time for a ping pro… |
| 1.3.6.1.4.1.259.10.1.5.1.10.16 | TableiPAddrTable | not-accessible | current | A table of iPAddrEntry. |
| 1.3.6.1.4.1.259.10.1.5.1.10.16.1 | RowiPAddrEntry | not-accessible | current | A set of configuration parameters for a particular network interface on this device. If the device has no network interface, this table is empty. The index is … |
| 1.3.6.1.4.1.259.10.1.5.1.10.16.1.1 | ColumniPAddrIfIndex | not-accessible | current | The VLAN interface being used by this table entry. Only the VLAN interfaces which have an IP configured will appear in the table. |
| 1.3.6.1.4.1.259.10.1.5.1.10.16.1.2 | ColumniPAddrIPAddress | not-accessible | current | The IP address of this Net interface. The default value for this object is 0.0.0.0. If either the IPAddrIPAddress or IPAddrSubnetMask is 0.0.0.0, then when the… |
| 1.3.6.1.4.1.259.10.1.5.1.10.16.1.3 | ColumniPAddrSubnetMask | not-accessible | current | The subnet mask of this Net interface. The default value for this object is 0.0.0.0. If either the IPAddrIPAddress or IPAddrSubnetMask are 0.0.0.0, then when t… |
| 1.3.6.1.4.1.259.10.1.5.1.10.16.1.4 | ColumniPAddrPrimaryInterface | read-create | current | Whether this is a primary interface. |
| 1.3.6.1.4.1.259.10.1.5.1.10.16.1.5 | ColumniPAddrUnnumbered | read-only | current | Whether this is an unnumbered interface. |
| 1.3.6.1.4.1.259.10.1.5.1.10.16.1.6 | ColumniPAddrStatus | read-create | current | The status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: -… |
| 1.3.6.1.4.1.259.10.1.5.1.12 | NodevlanMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.12.1 | TablevlanTable | not-accessible | current | Table for VLAN configuration. |
| 1.3.6.1.4.1.259.10.1.5.1.12.1.1 | RowvlanEntry | not-accessible | current | Entry for VLAN configuration. |
| 1.3.6.1.4.1.259.10.1.5.1.12.1.1.1 | ColumnvlanIndex | not-accessible | current | Based on dot1qVlanIndex in the Q-BRIDGE-MIB. This table has only one entry - the entry for the VLAN of the management interface. |
| 1.3.6.1.4.1.259.10.1.5.1.12.1.1.2 | ColumnvlanAddressMethod | read-write | current | Method to get the IP address. |
| 1.3.6.1.4.1.259.10.1.5.1.12.2 | TablevlanPortTable | not-accessible | current | Table for port configuration in VLAN. |
| 1.3.6.1.4.1.259.10.1.5.1.12.2.1 | RowvlanPortEntry | not-accessible | current | Entry for port configuration in VLAN. |
| 1.3.6.1.4.1.259.10.1.5.1.12.2.1.1 | ColumnvlanPortIndex | not-accessible | current | The port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface… |
| 1.3.6.1.4.1.259.10.1.5.1.12.2.1.2 | ColumnvlanPortMode | read-write | current | This variable sets the 802.1Q VLAN mode. Setting it to hybrid(1) sets a hybrid link. Setting it to dot1qTrunk(2) sets a trunk link. Setting it to access(3) set… |
| 1.3.6.1.4.1.259.10.1.5.1.12.2.1.3 | ColumnvlanPortPrivateVlanType | read-write | current | The port type defined for private VLAN. |
| 1.3.6.1.4.1.259.10.1.5.1.12.6 | NodevoiceVlanMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.12.6.1 | TablevoiceVlanOuiTable | not-accessible | current | A table containing the mac address which can be identified by voice vlan. |
| 1.3.6.1.4.1.259.10.1.5.1.12.6.1.1 | RowvoiceVlanOuiEntry | not-accessible | current | A table containing the mac address which can be identified by voice vlan. |
| 1.3.6.1.4.1.259.10.1.5.1.12.6.1.1.1 | ColumnvoiceVlanOuiAddress | read-only | current | MAC address can be identified by voice vlan. |
| 1.3.6.1.4.1.259.10.1.5.1.12.6.1.1.2 | ColumnvoiceVlanOuiMask | read-write | current | The mask of MAC address. |
| 1.3.6.1.4.1.259.10.1.5.1.12.6.1.1.3 | ColumnvoiceVlanOuiDescription | read-write | current | The description of oui. |
| 1.3.6.1.4.1.259.10.1.5.1.12.6.1.1.4 | ColumnvoiceVlanOuiStatus | read-create | current | Current operation status of the row. |
| 1.3.6.1.4.1.259.10.1.5.1.12.6.2 | ScalarvoiceVlanEnabledId | read-write | current | Voice vlan enable status: enabled (2..4094), disabled (-1). |
| 1.3.6.1.4.1.259.10.1.5.1.12.6.3 | ScalarvoiceVlanAgingTime | read-write | current | Voice vlan aging time, the unit of which is minute. |
| 1.3.6.1.4.1.259.10.1.5.1.12.6.7 | TablevoiceVlanPortTable | not-accessible | current | A list of voice vlan mode entries. |
| 1.3.6.1.4.1.259.10.1.5.1.12.6.7.1 | RowvoiceVlanPortEntry | not-accessible | current | An entry containing voice vlan mode information, which is applicable to a voice vlan enabled interface. |
| 1.3.6.1.4.1.259.10.1.5.1.12.6.7.1.1 | ColumnvoiceVlanPortIfIndex | not-accessible | current | The index of interface on which voice vlan function is enabled. |
| 1.3.6.1.4.1.259.10.1.5.1.12.6.7.1.2 | ColumnvoiceVlanPortMode | read-write | current | Voice vlan configuration mode status. |
| 1.3.6.1.4.1.259.10.1.5.1.12.6.7.1.3 | ColumnvoiceVlanPortSecurity | read-write | current | If the security is enabled, the port is only allow voice traffuc for the voice vlan. |
| 1.3.6.1.4.1.259.10.1.5.1.12.6.7.1.4 | ColumnvoiceVlanPortPriority | read-write | current | The priority of the voice vlan traffic in the port. |
| 1.3.6.1.4.1.259.10.1.5.1.12.6.7.1.5 | ColumnvoiceVlanPortRuleOui | read-write | current | The address of voice device is learned from Oui table. |
| 1.3.6.1.4.1.259.10.1.5.1.12.6.7.1.6 | ColumnvoiceVlanPortRuleLldp | read-write | current | The address of voice device is learned from LLDP discovery. |
| 1.3.6.1.4.1.259.10.1.5.1.12.8 | NodevlanDot1qTunnelGlobalConfig | |||
| 1.3.6.1.4.1.259.10.1.5.1.12.8.1 | ScalarvlanDot1qTunnelStatus | read-write | current | This parameter is used to globally enable/disable 802.1Q Tunneling on the device. |
| 1.3.6.1.4.1.259.10.1.5.1.12.9 | TablevlanDot1qTunnelPortTable | not-accessible | current | Table for port configuration in 802.1Q Tunneling. |
| 1.3.6.1.4.1.259.10.1.5.1.12.9.1 | RowvlanDot1qTunnelPortEntry | not-accessible | current | Entry for port configuration in 802.1Q Tunneling. |
| 1.3.6.1.4.1.259.10.1.5.1.12.9.1.1 | ColumnvlanDot1qTunnelPortIndex | not-accessible | current | The port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface… |
| 1.3.6.1.4.1.259.10.1.5.1.12.9.1.2 | ColumnvlanDot1qTunnelPortMode | read-write | current | This variable sets the 802.1Q Tunneling mode. Setting it to none(1) indicates no mode in this port. Setting it to access(2) sets as dot1q-tunnel mode port whic… |
| 1.3.6.1.4.1.259.10.1.5.1.12.9.1.3 | ColumnvlanDot1qTunnelPortEtherType | read-write | current | TPID for 802.1Q encapsulation. It's used to select a nonstandard (nondefault) 2-byte ethertype to identify 802.1Q tagged frames. |
| 1.3.6.1.4.1.259.10.1.5.1.12.11 | TablemacVlanTable | not-accessible | current | A table that contains the settings for MAC-based VLAN. |
| 1.3.6.1.4.1.259.10.1.5.1.12.11.1 | RowmacVlanEntry | not-accessible | current | A conceptual row in the macVlanTable. |
| 1.3.6.1.4.1.259.10.1.5.1.12.11.1.1 | ColumnmacVlanMacAddress | not-accessible | current | The MAC address that may specify an entry in the table which contains MAC-based VLAN information. |
| 1.3.6.1.4.1.259.10.1.5.1.12.11.1.2 | ColumnmacVlanId | read-create | current | Specifies the VLAN ID which the MAC address associates with. |
| 1.3.6.1.4.1.259.10.1.5.1.12.11.1.3 | ColumnmacVlanPriority | read-create | current | Specifies the priority whcich the MAC address associates with. |
| 1.3.6.1.4.1.259.10.1.5.1.12.11.1.4 | ColumnmacVlanStatus | read-create | current | Set this to valid(1) to create an entry. Set this to invalid(2) to destroy an entry. |
| 1.3.6.1.4.1.259.10.1.5.1.12.12 | ScalarmacVlanClearAction | read-write | current | Action for clearing macVlanTable. When this object is set to clear(2), all entries in macVlanTable will be cleared. When this object is read, the value of this… |
| 1.3.6.1.4.1.259.10.1.5.1.12.13 | TablesubnetVlanTable | not-accessible | current | A table that contains the settings for IP subnet-based VLAN. |
| 1.3.6.1.4.1.259.10.1.5.1.12.13.1 | RowsubnetVlanEntry | not-accessible | current | A conceptual row in the subnetVlanTable. |
| 1.3.6.1.4.1.259.10.1.5.1.12.13.1.1 | ColumnsubnetVlanIpAddress | not-accessible | current | The IPv4 address of a subnet. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of … |
| 1.3.6.1.4.1.259.10.1.5.1.12.13.1.2 | ColumnsubnetVlanMask | not-accessible | current | The netmask of a subnet. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x wit… |
| 1.3.6.1.4.1.259.10.1.5.1.12.13.1.3 | ColumnsubnetVlanId | read-create | current | Specifies the VLAN ID which the subnet associates with. |
| 1.3.6.1.4.1.259.10.1.5.1.12.13.1.4 | ColumnsubnetVlanPriority | read-create | current | Specifies the priority whcich the subnet associates with. |
| 1.3.6.1.4.1.259.10.1.5.1.12.13.1.5 | ColumnsubnetVlanStatus | read-create | current | Set this to valid(1) to create an entry. Set this to invalid(2) to destroy an entry. |
| 1.3.6.1.4.1.259.10.1.5.1.12.14 | ScalarsubnetVlanClearAction | read-write | current | Action for clearing subnetVlanTable. When this object is set to clear(2), all entries in subnetVlanTable will be cleared. When this object is read, the value o… |
| 1.3.6.1.4.1.259.10.1.5.1.12.17 | TablevlanStaticTable | not-accessible | current | Table for static VLAN configuration including VLAN aggregation support. |
| 1.3.6.1.4.1.259.10.1.5.1.12.17.1 | RowvlanStaticEntry | not-accessible | current | Static information for a VLAN configured on the device by (local or network) management. |
| 1.3.6.1.4.1.259.10.1.5.1.12.17.1.1 | ColumnvlanStaticIndex | not-accessible | current | The VLAN ID of the VLAN. |
| 1.3.6.1.4.1.259.10.1.5.1.12.17.1.2 | ColumnvlanStaticInterfaceType | read-create | current | The interface type of the VLAN (there is a subtype of IANAifType). l2vlan(135) refers to L2 interface and can't accept any L3 related configuration. l3ipvlan(1… |
| 1.3.6.1.4.1.259.10.1.5.1.12.18 | TablevlanDot1qTunnelSrvCvidPortTable | not-accessible | current | Table for port configuration to specify how to insert outer tag by matching customer VLAN ID. |
| 1.3.6.1.4.1.259.10.1.5.1.12.18.1 | RowvlanDot1qTunnelSrvCvidPortEntry | not-accessible | current | Entry for port configuration to specify how to insert outer tag by matching customer VLAN ID. |
| 1.3.6.1.4.1.259.10.1.5.1.12.18.1.1 | ColumnvlanDot1qTunnelSrvCvidPortIndex | not-accessible | current | The port interface of the vlanDot1qTunnelSrvCvidPortTable. The interface identified by a particular value of this index is the same interface as identified by … |
| 1.3.6.1.4.1.259.10.1.5.1.12.18.1.2 | ColumnvlanDot1qTunnelSrvCvidPortCvid | not-accessible | current | Specifies customer VLAN ID. |
| 1.3.6.1.4.1.259.10.1.5.1.12.18.1.3 | ColumnvlanDot1qTunnelSrvCvidPortSvid | read-create | current | Specifies service VLAN ID. |
| 1.3.6.1.4.1.259.10.1.5.1.12.18.1.5 | ColumnvlanDot1qTunnelSrvCvidPortStatus | read-create | current | Sets to valid(1) to create an entry. Sets to invalid(2) to destroy an entry. |
| 1.3.6.1.4.1.259.10.1.5.1.12.18.1.6 | ColumnvlanDot1qTunnelSrvCvidPortAction | read-create | current | Sets to assignSvid(2) to assign service VLAN ID. Sets to removeCtag(4) to remove customer VLAN tag. |
| 1.3.6.1.4.1.259.10.1.5.1.13 | NodepriorityMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.13.12 | TableprioWrrPortTable | not-accessible | current | Table for per port weighted round robin (WRR). |
| 1.3.6.1.4.1.259.10.1.5.1.13.12.1 | RowprioWrrPortEntry | not-accessible | current | Entry for per port weighted round robin (WRR). |
| 1.3.6.1.4.1.259.10.1.5.1.13.12.1.1 | ColumnprioWrrPortIfIndex | not-accessible | current | The port interface of the prioWrrPortEntry. The interface identified by a particular value of this index is the same interface as identified by the same value … |
| 1.3.6.1.4.1.259.10.1.5.1.13.12.1.2 | ColumnprioWrrPortTrafficClass | not-accessible | current | Traffic class for this entry, as defined in dot1dTrafficClass in the P-BRIDGE-MIB. The actual maximum depends on the hardware, and is equal to dot1dPortNumTraf… |
| 1.3.6.1.4.1.259.10.1.5.1.13.12.1.3 | ColumnprioWrrPortWeight | read-write | current | Weight for this entry. |
| 1.3.6.1.4.1.259.10.1.5.1.13.15 | TableprioSchedModePortTable | not-accessible | current | Table for per port scheduling mode. |
| 1.3.6.1.4.1.259.10.1.5.1.13.15.1 | RowprioSchedModePortEntry | not-accessible | current | Entry for per port scheduling mode. |
| 1.3.6.1.4.1.259.10.1.5.1.13.15.1.1 | ColumnprioSchedModePortIndex | not-accessible | current | The port interface of the prioSchedModePortEntry. |
| 1.3.6.1.4.1.259.10.1.5.1.13.15.1.2 | ColumnprioSchedModePort | read-write | current | The scheduling mode status of ethernet port. wrr(1), strict(2), strict-wrr(4) |
| 1.3.6.1.4.1.259.10.1.5.1.14 | NodetrapDestMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.14.1 | TabletrapDestTable | not-accessible | current | A list of trap destination entries. |
| 1.3.6.1.4.1.259.10.1.5.1.14.1.1 | RowtrapDestEntry | not-accessible | current | A destination entry describes the destination IP address, the community string, and SNMP version to use when sending a trap. |
| 1.3.6.1.4.1.259.10.1.5.1.14.1.1.1 | ColumntrapDestAddress | not-accessible | current | The address to send traps. |
| 1.3.6.1.4.1.259.10.1.5.1.14.1.1.2 | ColumntrapDestCommunity | read-create | current | A community to which this destination address belongs. |
| 1.3.6.1.4.1.259.10.1.5.1.14.1.1.3 | ColumntrapDestStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.259.10.1.5.1.14.1.1.4 | ColumntrapDestVersion | read-create | current | Determines the version of the trap that is to be sent to the trap receiver. If the value is 1, then an SNMP version 1 trap is sent and if the value is 2, an SN… |
| 1.3.6.1.4.1.259.10.1.5.1.14.1.1.5 | ColumntrapDestUdpPort | read-create | current | Determines the UDP port number that the trap will be sent to. |
| 1.3.6.1.4.1.259.10.1.5.1.14.2 | NodetrapVar | |||
| 1.3.6.1.4.1.259.10.1.5.1.14.2.6 | ScalartrapIpFilterRejectMode | accessible-for-notify | current | This variable is for trap var binding, indicated the ipfilter reject mode. web(1), snmp(2), telnet(3). |
| 1.3.6.1.4.1.259.10.1.5.1.14.2.7 | ScalartrapIpFilterRejectIp | accessible-for-notify | current | This variable is for trap var binding, indicating the IP address that rejected by the ipfilter. |
| 1.3.6.1.4.1.259.10.1.5.1.14.2.19 | ScalartrapLoginMode | accessible-for-notify | current | This variable is for trap var binding, indicated the login mode. console(1), telnet(2), web(3). |
| 1.3.6.1.4.1.259.10.1.5.1.14.2.20 | ScalartrapLoginUsername | accessible-for-notify | current | This variable is for trap var binding, indicating the login username. |
| 1.3.6.1.4.1.259.10.1.5.1.14.2.21 | ScalartrapLoginIp | accessible-for-notify | current | This variable is for trap var binding, indicating the login IP address. |
| 1.3.6.1.4.1.259.10.1.5.1.16 | NodeqosMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.16.1 | NoderateLimitMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.16.1.2 | TablerateLimitPortTable | not-accessible | current | Table for rate limit of each port. |
| 1.3.6.1.4.1.259.10.1.5.1.16.1.2.1 | RowrateLimitPortEntry | not-accessible | current | Entry for rate limit of each port. |
| 1.3.6.1.4.1.259.10.1.5.1.16.1.2.1.1 | ColumnrlPortIndex | not-accessible | current | The port and the trunk (including trunk member) interface of the portTable. The interface identified by a particular value of this index is the same interface … |
| 1.3.6.1.4.1.259.10.1.5.1.16.1.2.1.2 | ColumnrlPortInputLimit | read-write | current | Value of the input rate limit. Its unit is megabits per second. For a 100 Mbps port, the range is 1 to 100. For a 1000 Mbps port, the range is 1 to 1000. For a… |
| 1.3.6.1.4.1.259.10.1.5.1.16.1.2.1.3 | ColumnrlPortOutputLimit | read-write | current | Value of the output rate limit. Its unit is megabits per second. For a 100 Mbps port, the range is 1 to 100. For a 1000 Mbps port, the range is 1 to 1000. For … |
| 1.3.6.1.4.1.259.10.1.5.1.16.1.2.1.6 | ColumnrlPortInputStatus | read-write | current | Whether input rate limit is enabled for this port. |
| 1.3.6.1.4.1.259.10.1.5.1.16.1.2.1.7 | ColumnrlPortOutputStatus | read-write | current | Whether output rate limit is enabled for this port. |
| 1.3.6.1.4.1.259.10.1.5.1.16.3 | NodecosMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.16.3.1 | TableprioAclToCosMappingTable | not-accessible | current | Table for ACL to CoS Mapping. |
| 1.3.6.1.4.1.259.10.1.5.1.16.3.1.1 | RowprioAclToCosMappingEntry | not-accessible | current | Entry for ACL to CoS Mapping. |
| 1.3.6.1.4.1.259.10.1.5.1.16.3.1.1.1 | ColumnprioAclToCosMappingIfIndex | not-accessible | current | The port interface of the prioAclToCosMappingEntry. The interface identified by a particular value of this index is the same interface as identified by the sam… |
| 1.3.6.1.4.1.259.10.1.5.1.16.3.1.1.2 | ColumnprioAclToCosMappingAclName | not-accessible | current | The name of an IP ACL. Within a feature a unique name is used to identify the list to which the entry belongs in the device. |
| 1.3.6.1.4.1.259.10.1.5.1.16.3.1.1.3 | ColumnprioAclToCosMappingCosValue | read-create | current | CoS value of the prioAclToCosMappingTable. |
| 1.3.6.1.4.1.259.10.1.5.1.16.3.1.1.4 | ColumnprioAclToCosMappingStatus | read-create | current | The status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: -… |
| 1.3.6.1.4.1.259.10.1.5.1.16.3.2 | TableprioIfClassificationModeTable | not-accessible | current | Table for setting the interface Qos mapping classification mode. |
| 1.3.6.1.4.1.259.10.1.5.1.16.3.2.1 | RowprioIfClassificationModeEntry | not-accessible | current | Entry for setting the interface Qos mapping classification mode. |
| 1.3.6.1.4.1.259.10.1.5.1.16.3.2.1.1 | ColumnprioIfClassificationModeIf | not-accessible | current | The port or trunk interface of the device. The interface identified by a particular value of this index is the same interface as identified by the same value o… |
| 1.3.6.1.4.1.259.10.1.5.1.16.3.2.1.2 | ColumnprioIfClassificationModeStatus | read-write | current | The Qos mapping classification mode of the interface. cos mode means that the internal priority is mapped from priority field of packet's VLAN tag if a VLAN ta… |
| 1.3.6.1.4.1.259.10.1.5.1.16.3.3 | TableprioCosToDscpTable | not-accessible | current | Table for CoS/CFI to internal QoS label mapping. |
| 1.3.6.1.4.1.259.10.1.5.1.16.3.3.1 | RowprioCosToDscpEntry | not-accessible | current | Entry for CoS/CFI to internal QoS label mapping. |
| 1.3.6.1.4.1.259.10.1.5.1.16.3.3.1.1 | ColumnprioCosToDscpIfValue | not-accessible | current | The port or the trunk interface of the device. The interface identified by a particular value of this index is the same interface as identified by the same val… |
| 1.3.6.1.4.1.259.10.1.5.1.16.3.3.1.2 | ColumnprioCosToDscpCosValue | not-accessible | current | The CoS value (0~7) mapped to an internal QoS label value which is composed of PHB(3 bits) and drop precedence(2 bits). |
| 1.3.6.1.4.1.259.10.1.5.1.16.3.3.1.3 | ColumnprioCosToDscpCFIValue | not-accessible | current | The CFI value (0 or 1) mapped to an internal QoS label value which is composed of PHB(3 bits) and drop precedence(2 bits). |
| 1.3.6.1.4.1.259.10.1.5.1.16.3.3.1.4 | ColumnprioCosToDscpDscpValue | read-write | current | The DSCP value used to represent the internal QoS label (3 bits PHB+2 bits Drop precedence). The MSB 4 bits of DSCP is used to represent PHB value of QoS label… |
| 1.3.6.1.4.1.259.10.1.5.1.16.3.4 | TableprioPrecToDscpTable | not-accessible | current | Table for IP precedence to internal QoS label mapping. This table setting will take effect only when the interface QoS mapping classification mode is set to IP… |
| 1.3.6.1.4.1.259.10.1.5.1.16.3.4.1 | RowprioPrecToDscpEntry | not-accessible | current | Entry for IP precedence to internal QoS label mapping. |
| 1.3.6.1.4.1.259.10.1.5.1.16.3.4.1.1 | ColumnprioPrecToDscpIfValue | not-accessible | current | The port or trunk interface of the device. The interface identified by a particular value of this index is the same interface as identified by the same value o… |
| 1.3.6.1.4.1.259.10.1.5.1.16.3.4.1.2 | ColumnprioPrecToDscpPrecValue | not-accessible | current | The IP precedence value mapped to internal QoS label value which is composed of PHB (3 bits) and drop precedence (2 bits). |
| 1.3.6.1.4.1.259.10.1.5.1.16.3.4.1.3 | ColumnprioPrecToDscpDscpValue | read-write | current | The DSCP value used to represent internal QoS label (3 bits PHB + 2 bits Drop precedence). The MSB 4 bits of DSCP are used to represent PHB value of QoS label;… |
| 1.3.6.1.4.1.259.10.1.5.1.16.3.5 | TableprioDscpToDscpTable | not-accessible | current | Table for DSCP to internal QoS label mapping. This table setting will take effect only when the interface Qos mapping classification mode is set to DSCP mode. |
| 1.3.6.1.4.1.259.10.1.5.1.16.3.5.1 | RowprioDscpToDscpEntry | not-accessible | current | Entry for ingress DSCP to internal QoS label mapping. |
| 1.3.6.1.4.1.259.10.1.5.1.16.3.5.1.1 | ColumnprioDscpToDscpIfValue | not-accessible | current | The port or trunk interface of the device. The interface identified by a particular value of this index is the same interface as identified by the same value o… |
| 1.3.6.1.4.1.259.10.1.5.1.16.3.5.1.2 | ColumnprioDscpToDscpIngressDscpValue | not-accessible | current | The ingress DSCP value which will be mapped to internal QoS label value. |
| 1.3.6.1.4.1.259.10.1.5.1.16.3.5.1.3 | ColumnprioDscpToDscpDscpValue | read-write | current | The DSCP value used to represent internal QoS label (3 bits PHB + 2 bits Drop precedence). The MSB 4 bits of DSCP are used to represent PHB value of Qos label.… |
| 1.3.6.1.4.1.259.10.1.5.1.16.3.6 | TableprioDstPortToDscpTable | not-accessible | current | Table for TCP/UDP destination port number to internal Qos label mapping. This table setting will always take effect for TCP/UDP packets no matter of what inter… |
| 1.3.6.1.4.1.259.10.1.5.1.16.3.6.1 | RowprioDstPortToDscpEntry | not-accessible | current | Entry for TCP/UDP destination port to internal QoS label mapping. |
| 1.3.6.1.4.1.259.10.1.5.1.16.3.6.1.1 | ColumnprioDstPortToDscpIfValue | not-accessible | current | The port or the trunk interface of the device. The interface identified by a particular value of this index is the same interface as identified by the same val… |
| 1.3.6.1.4.1.259.10.1.5.1.16.3.6.1.2 | ColumnprioDstPortToDscpProtocolValue | not-accessible | current | The protocol value (TCP:6, UDP:17) which will be mapped to internal QoS label value. |
| 1.3.6.1.4.1.259.10.1.5.1.16.3.6.1.3 | ColumnprioDstPortToDscpDstPortValue | not-accessible | current | The destination port number value which will be mapped to internal QoS label value. |
| 1.3.6.1.4.1.259.10.1.5.1.16.3.6.1.4 | ColumnprioDstPortToDscpDscpValue | read-write | current | The DSCP value used to represent internal QoS label (3 bits PHB + 2 bits Drop precedence). The MSB 4 bits of DSCP is used to represent PHB value of QoS label. … |
| 1.3.6.1.4.1.259.10.1.5.1.16.3.7 | TableprioDscpToCosTable | not-accessible | current | Table for internal QoS label to CoS and CFI mapping. |
| 1.3.6.1.4.1.259.10.1.5.1.16.3.7.1 | RowprioDscpToCosEntry | not-accessible | current | Entry for internal QoS label to CoS and CFI mapping. |
| 1.3.6.1.4.1.259.10.1.5.1.16.3.7.1.1 | ColumnprioDscpToCosIfValue | not-accessible | current | The port or trunk interface of the device. The interface identified by a particular value of this index is the same interface as identified by the same value o… |
| 1.3.6.1.4.1.259.10.1.5.1.16.3.7.1.2 | ColumnprioDscpToCosPHBValue | not-accessible | current | The PHB value of internal QoS label. |
| 1.3.6.1.4.1.259.10.1.5.1.16.3.7.1.3 | ColumnprioDscpToCosDropPrecedenceValue | not-accessible | current | The drop precedence value of internal QoS label. Green(0), Yellow(3), Red(1). |
| 1.3.6.1.4.1.259.10.1.5.1.16.3.7.1.4 | ColumnprioDscpToCosCFICosValue | read-write | current | The remarked CFI and CoS value mapped from the internal Qos label value when the packet leaves the device. The egress remarked CFI value equals to (prioDscpToC… |
| 1.3.6.1.4.1.259.10.1.5.1.16.3.8 | TableprioPrioToDropPrecTable | not-accessible | current | Table for packet priority to drop precedence mapping. |
| 1.3.6.1.4.1.259.10.1.5.1.16.3.8.1 | RowprioPrioToDropPrecEntry | not-accessible | current | Entry for packet priority to drop precedence mapping. |
| 1.3.6.1.4.1.259.10.1.5.1.16.3.8.1.1 | ColumnprioPrioToDropPrecIfValue | not-accessible | current | The port or the trunk interface of the device. The interface identified by a particular value of this index is the same interface as identified by the same val… |
| 1.3.6.1.4.1.259.10.1.5.1.16.3.8.1.2 | ColumnprioPrioToDropPrecPriorityValue | not-accessible | current | The value of packet default priority. |
| 1.3.6.1.4.1.259.10.1.5.1.16.3.8.1.3 | ColumnprioPrioToDropPrecPrecValue | read-write | current | The drop precedence value of internal QoS label. Green(0),Yellow(3), Red(1). |
| 1.3.6.1.4.1.259.10.1.5.1.16.3.9 | TableprioDscpToQueueTable | not-accessible | current | Table for PHB to queue mapping. |
| 1.3.6.1.4.1.259.10.1.5.1.16.3.9.1 | RowprioDscpToQueueEntry | not-accessible | current | Entry for PHB to queue mapping. |
| 1.3.6.1.4.1.259.10.1.5.1.16.3.9.1.1 | ColumnprioDscpToQueueIfValue | not-accessible | current | The port or trunk interface of the device. The interface identified by a particular value of this index is the same interface as identified by the same value o… |
| 1.3.6.1.4.1.259.10.1.5.1.16.3.9.1.2 | ColumnprioDscpToQueuePHBValue | not-accessible | current | The PHB value of internal QoS label. |
| 1.3.6.1.4.1.259.10.1.5.1.16.3.9.1.3 | ColumnprioDscpToQueueQueueValue | read-write | current | The queue value which is mapped from the PHB value of QoS label. |
| 1.3.6.1.4.1.259.10.1.5.1.16.4 | NodediffServMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.16.4.9 | TablediffServPortTable | not-accessible | current | Table for differentiated services on each port. |
| 1.3.6.1.4.1.259.10.1.5.1.16.4.9.1 | RowdiffServPortEntry | not-accessible | current | Entry for differentiated services on each port. |
| 1.3.6.1.4.1.259.10.1.5.1.16.4.9.1.1 | ColumndiffServPortIfIndex | not-accessible | current | This object is the interface index of diffServPortEntry. The interface identified by a particular value of this index is the same interface as identified by th… |
| 1.3.6.1.4.1.259.10.1.5.1.16.4.9.1.2 | ColumndiffServPortPolicyMapIndex | read-write | current | Specifies the policy map binding to the interface. The policy map identified by a particular value of this index is associated with the same DiffServPolicyMapE… |
| 1.3.6.1.4.1.259.10.1.5.1.16.4.10 | TablediffServPolicyMapTable | not-accessible | current | Table for policy map. |
| 1.3.6.1.4.1.259.10.1.5.1.16.4.10.1 | RowdiffServPolicyMapEntry | not-accessible | current | Entry for policy map. |
| 1.3.6.1.4.1.259.10.1.5.1.16.4.10.1.1 | ColumndiffServPolicyMapIndex | not-accessible | current | An index that uniquely identifies an entry in this table. |
| 1.3.6.1.4.1.259.10.1.5.1.16.4.10.1.2 | ColumndiffServPolicyMapName | read-create | current | The name of this entry. |
| 1.3.6.1.4.1.259.10.1.5.1.16.4.10.1.3 | ColumndiffServPolicyMapDescription | read-create | current | The description of this entry. |
| 1.3.6.1.4.1.259.10.1.5.1.16.4.10.1.4 | ColumndiffServPolicyMapElementIndexList | read-only | current | The octet string containes the diffServPolicyMapElementEntry indexes. Two octets express one index and it is represented in network order. This index list indi… |
| 1.3.6.1.4.1.259.10.1.5.1.16.4.10.1.5 | ColumndiffServPolicyMapStatus | read-create | current | This object is used to create a new row, or modify or delete an existing row, in this table. The status column has six defined values: The status column has si… |
| 1.3.6.1.4.1.259.10.1.5.1.16.4.11 | NodediffServPolicyMapAttachCtl | |||
| 1.3.6.1.4.1.259.10.1.5.1.16.4.11.1 | ScalardiffServPolicyMapAttachCtlIndex | read-write | current | Index for attachment control. Specifies the policy map as the target to relate with the policy map element. The policy map identified by a particular value of … |
| 1.3.6.1.4.1.259.10.1.5.1.16.4.11.2 | ScalardiffServPolicyMapAttachCtlElementIndex | read-write | current | Element Index for attachment control.Specifies the policy map element to relate with the policy map. The policy map element identified by a particular value of… |
| 1.3.6.1.4.1.259.10.1.5.1.16.4.11.3 | ScalardiffServPolicyMapAttachCtlAction | read-write | current | Action for attachment control. When setting this object to attach(2) to begin the attaching operation, a particular policy map element is attached to a particu… |
| 1.3.6.1.4.1.259.10.1.5.1.16.4.12 | TablediffServPolicyMapElementTable | not-accessible | current | Table for policy map element. |
| 1.3.6.1.4.1.259.10.1.5.1.16.4.12.1 | RowdiffServPolicyMapElementEntry | not-accessible | current | Entry for policy map element. |
| 1.3.6.1.4.1.259.10.1.5.1.16.4.12.1.1 | ColumndiffServPolicyMapElementIndex | not-accessible | current | An index that uniquely identifies an entry in this table. |
| 1.3.6.1.4.1.259.10.1.5.1.16.4.12.1.2 | ColumndiffServPolicyMapElementClassMapIndex | read-create | current | Specifies the class map binding to this entry. The class map identified by a particular value of this index is associated with the same diffServClassMapEntry a… |
| 1.3.6.1.4.1.259.10.1.5.1.16.4.12.1.3 | ColumndiffServPolicyMapElementMeterIndex | read-create | current | Specifies the meter binding to this entry. The meter identified by a particular value of this index is associated with the same diffServMeterEntry as identifie… |
| 1.3.6.1.4.1.259.10.1.5.1.16.4.12.1.4 | ColumndiffServPolicyMapElementActionIndex | read-create | current | Specifies the action binding to this entry. The action identified by a particular value of this index is associated with the same diffServActionEntry as identi… |
| 1.3.6.1.4.1.259.10.1.5.1.16.4.12.1.5 | ColumndiffServPolicyMapElementStatus | read-create | current | This object is used to create a new row, or modify or delete an existing row, in this table. The status column has six defined values: The status column has si… |
| 1.3.6.1.4.1.259.10.1.5.1.16.4.13 | TablediffServClassMapTable | not-accessible | current | Table for class map. |
| 1.3.6.1.4.1.259.10.1.5.1.16.4.13.1 | RowdiffServClassMapEntry | not-accessible | current | Entry for class map. |
| 1.3.6.1.4.1.259.10.1.5.1.16.4.13.1.1 | ColumndiffServClassMapIndex | not-accessible | current | An index that uniquely identifies an entry in this table. |
| 1.3.6.1.4.1.259.10.1.5.1.16.4.13.1.2 | ColumndiffServClassMapName | read-create | current | The name of this entry. |
| 1.3.6.1.4.1.259.10.1.5.1.16.4.13.1.3 | ColumndiffServClassMapDescription | read-create | current | The description of this entry. |
| 1.3.6.1.4.1.259.10.1.5.1.16.4.13.1.4 | ColumndiffServClassMapMatchType | read-create | current | The map match type of this entry. |
| 1.3.6.1.4.1.259.10.1.5.1.16.4.13.1.5 | ColumndiffServClassMapElementIndexTypeList | read-only | current | The octet string containes the type of class map element indexes. Two octets which are represented in network order express one type of the class map element i… |
| 1.3.6.1.4.1.259.10.1.5.1.16.4.13.1.6 | ColumndiffServClassMapElementIndexList | read-only | current | The octet string containes the class map element indexes. Two octets express one index and it is represented in network order. This index list indicates the pa… |
| 1.3.6.1.4.1.259.10.1.5.1.16.4.13.1.7 | ColumndiffServClassMapStatus | read-create | current | This object is used to create a new row or modify or delete an existing row in this table.The status column has six defined values: The status column has six d… |
| 1.3.6.1.4.1.259.10.1.5.1.16.4.14 | NodediffServClassMapAttachCtl | |||
| 1.3.6.1.4.1.259.10.1.5.1.16.4.14.1 | ScalardiffServClassMapAttachCtlIndex | read-write | current | Index for attachment control. Specifies the class map as the target to relate with class map elements. The class map identified by a particular value of this i… |
| 1.3.6.1.4.1.259.10.1.5.1.16.4.14.2 | ScalardiffServClassMapAttachCtlElementIndexType | read-write | current | Element Index for attachment control. Specifies the type of class map element to relate with the class map. When type is macAce(1), the index of diffServClassM… |
| 1.3.6.1.4.1.259.10.1.5.1.16.4.14.3 | ScalardiffServClassMapAttachCtlElementIndex | read-write | current | Element Index for attachment control. Specifies the class map element related with the class map. The class map element uses type to indicate diffServAclEntry,… |
| 1.3.6.1.4.1.259.10.1.5.1.16.4.14.4 | ScalardiffServClassMapAttachCtlAction | read-write | current | Action for attachment control. When setting this object to attach(2) to begin the attaching operation, a particular class map element is attached to a particul… |
| 1.3.6.1.4.1.259.10.1.5.1.16.4.19 | TablediffServActionTable | not-accessible | current | Table for action. |
| 1.3.6.1.4.1.259.10.1.5.1.16.4.19.1 | RowdiffServActionEntry | not-accessible | current | Entry for action. |
| 1.3.6.1.4.1.259.10.1.5.1.16.4.19.1.1 | ColumndiffServActionIndex | not-accessible | current | An index that uniquely identifies an entry in the action table. |
| 1.3.6.1.4.1.259.10.1.5.1.16.4.19.1.2 | ColumndiffServActionList | read-create | current | The bitmap value used to identify which action capabilities are enabled on the entry. The actionPktNewPri and actionPktNewDscp can not be enabled at the same t… |
| 1.3.6.1.4.1.259.10.1.5.1.16.4.19.1.3 | ColumndiffServActionPktNewPri | read-create | current | Specifies the new priority value for the packet when the action is satisfied. If the actionPktNewPri bit of the diffServActionList is not enabled, this object … |
| 1.3.6.1.4.1.259.10.1.5.1.16.4.19.1.4 | ColumndiffServActionPktNewPhb | read-create | current | Specifies the inner priority value for the packet when the action is satisfied. If the actionPktNewPhb bit of the diffServActionList is not enabled, this objec… |
| 1.3.6.1.4.1.259.10.1.5.1.16.4.19.1.5 | ColumndiffServActionGreenPktTransmit | read-create | current | The actionGreenPktTransmit bit of the diffServActionList is for configuring this object. If the value of this object is enabled, the green marking packet will … |
| 1.3.6.1.4.1.259.10.1.5.1.16.4.19.1.6 | ColumndiffServActionGreenPktNewDscp | read-create | current | Specifies the new DSCP value for the packet when the action is satisfied. The value of this object is ignored whenever the value of diffServActionGreenPktNewDs… |
| 1.3.6.1.4.1.259.10.1.5.1.16.4.19.1.7 | ColumndiffServActionYellowPktNewDscp | read-create | current | Specifies the new DSCP value for the packet when the action is satisfied. The value of this object is ignored whenever the value of diffServActionYellowPktNewD… |
| 1.3.6.1.4.1.259.10.1.5.1.16.4.19.1.8 | ColumndiffServActionYellowPktDrop | read-create | current | The actionYellowPktDrop bit of the diffServActionList is for configuring this object. If the value of this object is enabled, the red marking packet will be dr… |
| 1.3.6.1.4.1.259.10.1.5.1.16.4.19.1.9 | ColumndiffServActionRedPktNewDscp | read-create | current | Specifies the new DSCP value for the red marking packet when the action is satisfied. The value of this object is ignored whenever the value of diffServActionR… |
| 1.3.6.1.4.1.259.10.1.5.1.16.4.19.1.10 | ColumndiffServActionRedPktDrop | read-create | current | The actionRedPktDrop bit of the diffServActionList is for configuring this object. If the value of this object is enabled, the red marking packet will be dropp… |
| 1.3.6.1.4.1.259.10.1.5.1.16.4.19.1.11 | ColumndiffServActionStatus | read-create | current | This object is used to create a new row, modify or delete an existing row in this table. The status column has six defined values: The status column has six de… |
| 1.3.6.1.4.1.259.10.1.5.1.16.4.19.1.12 | ColumndiffServActionPktNewIpPrec | read-create | current | Specifies the new precedence value for the packet when the action is satisfied. If the actionPktNewIpPrec bit of the diffServActionList is not enabled, this ob… |
| 1.3.6.1.4.1.259.10.1.5.1.16.4.19.1.13 | ColumndiffServActionPktNewDscp | read-create | current | Specifies the new DSCP value for the packet when the action is satisfied. If the actionPktNewDscp bit of the diffServActionList is not enabled, this object can… |
| 1.3.6.1.4.1.259.10.1.5.1.16.4.20 | TablediffServMeterTable | not-accessible | current | Table for meter. |
| 1.3.6.1.4.1.259.10.1.5.1.16.4.20.1 | RowdiffServMeterEntry | not-accessible | current | Entry for meter. |
| 1.3.6.1.4.1.259.10.1.5.1.16.4.20.1.1 | ColumndiffServMeterIndex | not-accessible | current | An entry that describes a single set of token bucket parameters. |
| 1.3.6.1.4.1.259.10.1.5.1.16.4.20.1.2 | ColumndiffServMeterModel | read-create | current | The Metering algorithm associated with the Token Bucket parameters. The zeroDotZero indicates this is unknown. |
| 1.3.6.1.4.1.259.10.1.5.1.16.4.20.1.3 | ColumndiffServMeterRate | read-create | current | The token-bucket rate, in kilobits per second (kbps). |
| 1.3.6.1.4.1.259.10.1.5.1.16.4.20.1.4 | ColumndiffServMeterBurstSize | read-create | current | The maximum number of bytes in a single transmission burst. |
| 1.3.6.1.4.1.259.10.1.5.1.16.4.20.1.6 | ColumndiffServMeterStatus | read-create | current | This object is used to create a new row or modify or delete an existing row in this table. The status column has six defined values: The status column has six … |
| 1.3.6.1.4.1.259.10.1.5.1.16.4.20.1.7 | ColumndiffServMeterPeakRate | read-create | current | The token-bucket rate, in kilobits per second (kbps). |
| 1.3.6.1.4.1.259.10.1.5.1.16.4.20.1.8 | ColumndiffServMeterPeakBurstSize | read-create | current | The maximum number of bytes in a double transmission burst. |
| 1.3.6.1.4.1.259.10.1.5.1.17 | NodesecurityMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.17.1 | NodeprivateVlanMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.17.1.1 | ScalarprivateVlanStatus | read-write | current | This controls whether private VLAN is enabled. |
| 1.3.6.1.4.1.259.10.1.5.1.17.1.2 | ScalarprivateVlanUplinkPorts | read-write | current | This is the list of uplink ports for private VLAN. They should not overlap with privateVlanDownlinkPorts. Only one port can be set, no multiple ports. 0 will b… |
| 1.3.6.1.4.1.259.10.1.5.1.17.1.3 | ScalarprivateVlanDownlinkPorts | read-write | current | This is the list of downlink ports for private VLAN. They should not overlap with privateVlanUplinkPorts. Multiple port setting is permitted. 0 will be display… |
| 1.3.6.1.4.1.259.10.1.5.1.17.1.4 | TableprivateVlanVlanTable | not-accessible | current | A table containing private VLAN information on the VLANs which currently exist. |
| 1.3.6.1.4.1.259.10.1.5.1.17.1.4.1 | RowprivateVlanVlanEntry | not-accessible | current | A conceptual row containing the private VLAN information on the VLANs for a particular management domain. |
| 1.3.6.1.4.1.259.10.1.5.1.17.1.4.1.1 | ColumnprivateVlanVlanIndex | not-accessible | current | The VLAN ID of this private VLAN. |
| 1.3.6.1.4.1.259.10.1.5.1.17.1.4.1.2 | ColumnprivateVlanVlanType | read-create | current | The VLAN type as defined for Private VLAN feature. Set the value to invalid(1) to destroy an entry. Set other values to create an entry. If an index already ex… |
| 1.3.6.1.4.1.259.10.1.5.1.17.1.4.1.3 | ColumnprivateVlanAssoicatedPrimaryVlan | read-create | current | The VLAN ID of the associated primary VLAN used for the private VLAN feature if privateVlanVlanType has the value of isolated(3), community(4). If privateVlanV… |
| 1.3.6.1.4.1.259.10.1.5.1.17.1.5 | TableprivateVlanPrivatePortTable | not-accessible | current | A table containing information on the configuration of secondary VLANs on the device ports. |
| 1.3.6.1.4.1.259.10.1.5.1.17.1.5.1 | RowprivateVlanPrivatePortEntry | not-accessible | current | A conceptual row containing information of the configuration of secondary VLANs for each port. An entry is created by the managed system for each interface whi… |
| 1.3.6.1.4.1.259.10.1.5.1.17.1.5.1.1 | ColumnprivateVlanPrivatePortIfIndex | not-accessible | current | This is defined as the ifIndex. |
| 1.3.6.1.4.1.259.10.1.5.1.17.1.5.1.2 | ColumnprivateVlanPrivatePortSecondaryVlan | read-write | current | The VLAN ID of the secondary VLAN configured on this private port. A private port is a port that allows ingress traffic of the secondary VLAN as well as egress… |
| 1.3.6.1.4.1.259.10.1.5.1.17.1.6 | TableprivateVlanPromPortTable | not-accessible | current | A table containing secondary VLAN to primary VLAN remapping information on ports of the device. |
| 1.3.6.1.4.1.259.10.1.5.1.17.1.6.1 | RowprivateVlanPromPortEntry | not-accessible | current | A conceptual row containing secondary VLAN to primary VLAN remapping information for each port. An entry is created by the managed system for each interface wh… |
| 1.3.6.1.4.1.259.10.1.5.1.17.1.6.1.1 | ColumnprivateVlanPromPortIfIndex | not-accessible | current | This is defined as ifIndex. |
| 1.3.6.1.4.1.259.10.1.5.1.17.1.6.1.2 | ColumnprivateVlanPromPortPrimaryVlanId | read-write | current | The primary VLAN ID of the promiscous port. |
| 1.3.6.1.4.1.259.10.1.5.1.17.1.6.1.3 | ColumnprivateVlanPromPortSecondaryRemap | read-only | current | A string of octets containing one bit per VLAN in the management domain on this port. The first octet corresponds to VLANs with VlanIndexOrZero values of 0 thr… |
| 1.3.6.1.4.1.259.10.1.5.1.17.1.6.1.4 | ColumnprivateVlanPromPortSecondaryRemap2k | read-only | current | A string of octets containing one bit per VLAN for VLANs with VlanIndexOrZero values of 1024 through 2047 in the management domain on this port. The first octe… |
| 1.3.6.1.4.1.259.10.1.5.1.17.1.6.1.5 | ColumnprivateVlanPromPortSecondaryRemap3k | read-only | current | A string of octets containing one bit per VLAN for VLANs with VlanIndexOrZero values of 2048 through 3071 in the management domain on this port. The first octe… |
| 1.3.6.1.4.1.259.10.1.5.1.17.1.6.1.6 | ColumnprivateVlanPromPortSecondaryRemap4k | read-only | current | A string of octets containing one bit per VLAN for VLANs with VlanIndexOrZero values of 3072 through 4095 in the management domain on this port. The first octe… |
| 1.3.6.1.4.1.259.10.1.5.1.17.1.10 | TableprivateVlanEdgePortTable | not-accessible | current | Contains the settings for Private VLAN Edge. |
| 1.3.6.1.4.1.259.10.1.5.1.17.1.10.1 | RowprivateVlanEdgePortEntry | not-accessible | current | A conceptual row in the privateVlanEdgePortTable. |
| 1.3.6.1.4.1.259.10.1.5.1.17.1.10.1.1 | ColumnpvePortIfIndex | not-accessible | current | The port interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIn… |
| 1.3.6.1.4.1.259.10.1.5.1.17.1.10.1.2 | ColumnpvePortStatus | read-write | current | This controls whether Private VLAN Edge is enabled. |
| 1.3.6.1.4.1.259.10.1.5.1.17.2 | NodeportSecurityMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.17.2.1 | TableportSecPortTable | not-accessible | current | The port security(MAC binding) Table. |
| 1.3.6.1.4.1.259.10.1.5.1.17.2.1.1 | RowportSecPortEntry | not-accessible | current | The entry of portSecPortTable. |
| 1.3.6.1.4.1.259.10.1.5.1.17.2.1.1.1 | ColumnportSecPortIndex | not-accessible | current | The port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface… |
| 1.3.6.1.4.1.259.10.1.5.1.17.2.1.1.2 | ColumnportSecPortStatus | read-write | current | Set enabled(1) to enable port security and set disabled(2) to disable port security. |
| 1.3.6.1.4.1.259.10.1.5.1.17.2.1.1.3 | ColumnportSecAction | read-write | current | The corresponding actions that will take place when a port is under intrusion, when this variable is set to none(1), no action will be performed, when this var… |
| 1.3.6.1.4.1.259.10.1.5.1.17.2.1.1.4 | ColumnportSecMaxMacCount | read-write | current | The maximun number of MAC addresses that will be learned and locked. When we change the value of this variable, if the portSecPortStatus is enabled, we will di… |
| 1.3.6.1.4.1.259.10.1.5.1.17.4 | NoderadiusMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.17.4.1 | ScalarradiusServerGlobalAuthPort | read-write | current | Aauthentication port number for RADIUS server. When specified radius server do not set aauthentication port number, this value is used. |
| 1.3.6.1.4.1.259.10.1.5.1.17.4.2 | ScalarradiusServerGlobalAcctPort | read-write | current | Accounting port number of RADIUS server. When specified radius server do not set accounting port number, this value is used. |
| 1.3.6.1.4.1.259.10.1.5.1.17.4.3 | ScalarradiusServerGlobalKey | read-write | current | Key for RADIUS. This variable can only be written. When this variable is read, it always returns a zero-length string. When specified radius server do not set … |
| 1.3.6.1.4.1.259.10.1.5.1.17.4.4 | ScalarradiusServerGlobalRetransmit | read-write | current | Maximum number of retransmissions for RADIUS. When specified radius server do not set maximum number of retransmissions, this value is used. |
| 1.3.6.1.4.1.259.10.1.5.1.17.4.5 | ScalarradiusServerGlobalTimeout | read-write | current | Timeout for RADIUS. When specified radius server do not set timeout, this value is used. |
| 1.3.6.1.4.1.259.10.1.5.1.17.4.7 | TableradiusServerTable | not-accessible | current | The table for RADIUS server. |
| 1.3.6.1.4.1.259.10.1.5.1.17.4.7.1 | RowradiusServerEntry | not-accessible | current | The conceptual row for radiusServerTable. |
| 1.3.6.1.4.1.259.10.1.5.1.17.4.7.1.1 | ColumnradiusServerIndex | not-accessible | current | The RADIUS server index in the table. |
| 1.3.6.1.4.1.259.10.1.5.1.17.4.7.1.2 | ColumnradiusServerAddress | read-create | current | IP address of a RADIUS server. |
| 1.3.6.1.4.1.259.10.1.5.1.17.4.7.1.3 | ColumnradiusServerAuthPortNumber | read-create | current | Authentication port number of RADIUS server. |
| 1.3.6.1.4.1.259.10.1.5.1.17.4.7.1.4 | ColumnradiusServerAcctPortNumber | read-create | current | Accounting port number of RADIUS server. |
| 1.3.6.1.4.1.259.10.1.5.1.17.4.7.1.5 | ColumnradiusServerKey | read-write | current | Key for RADIUS. This variable can only be written. When this variable is read, it always returns a zero-length string. |
| 1.3.6.1.4.1.259.10.1.5.1.17.4.7.1.6 | ColumnradiusServerRetransmit | read-write | current | Timeout for RADIUS. |
| 1.3.6.1.4.1.259.10.1.5.1.17.4.7.1.7 | ColumnradiusServerTimeout | read-write | current | Timeout for RADIUS. |
| 1.3.6.1.4.1.259.10.1.5.1.17.4.7.1.8 | ColumnradiusServerStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.259.10.1.5.1.17.5 | NodetacacsMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.17.5.2 | ScalartacacsPlusServerGlobalPortNumber | read-write | current | TCP port number of TACACS+ server. When specified TACACS+ server do not set TCP port number, this this value is used. |
| 1.3.6.1.4.1.259.10.1.5.1.17.5.3 | ScalartacacsPlusServerGlobalKey | read-write | current | The encryption key used to encrpt the traffic between client and TACACS+ server. Do not use blank spaces in the string. This variable can only be set. When thi… |
| 1.3.6.1.4.1.259.10.1.5.1.17.5.4 | TabletacacsPlusServerTable | not-accessible | current | The table for TACACS+ server. |
| 1.3.6.1.4.1.259.10.1.5.1.17.5.4.1 | RowtacacsPlusServerEntry | not-accessible | current | The conceptual row for tacacsPlusServerTable. |
| 1.3.6.1.4.1.259.10.1.5.1.17.5.4.1.1 | ColumntacacsPlusServerIndex | not-accessible | current | TACACS+ server index. |
| 1.3.6.1.4.1.259.10.1.5.1.17.5.4.1.2 | ColumntacacsPlusServerAddress | read-create | current | IP address of a TACACS+ server. |
| 1.3.6.1.4.1.259.10.1.5.1.17.5.4.1.3 | ColumntacacsPlusServerPortNumber | read-create | current | TCP port number of a TACACS+ server. |
| 1.3.6.1.4.1.259.10.1.5.1.17.5.4.1.4 | ColumntacacsPlusServerKey | read-create | current | The encryption key used to encrpt the traffic between client and TACACS+ server. Do not use blank spaces in the string. This variable can only be set. When thi… |
| 1.3.6.1.4.1.259.10.1.5.1.17.5.4.1.8 | ColumntacacsPlusServerStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.259.10.1.5.1.17.6 | NodesshMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.17.6.1 | ScalarsshServerStatus | read-write | current | The status of Secure Shell Server. Set this value to enabled(1) to enable SSH server, set this value to disabled(2) to disable the SSH server. |
| 1.3.6.1.4.1.259.10.1.5.1.17.6.2 | ScalarsshServerMajorVersion | read-only | current | The major version of the SSH Server. |
| 1.3.6.1.4.1.259.10.1.5.1.17.6.3 | ScalarsshServerMinorVersion | read-only | current | The minor version of the SSH Server. |
| 1.3.6.1.4.1.259.10.1.5.1.17.6.4 | ScalarsshTimeout | read-write | current | The time interval that the router waits for the SSH client to respond. The range is 1-120. |
| 1.3.6.1.4.1.259.10.1.5.1.17.6.5 | ScalarsshAuthRetries | read-write | current | The number of attempts after which the interface is reset. The range is 1-5. |
| 1.3.6.1.4.1.259.10.1.5.1.17.6.6 | TablesshConnInfoTable | not-accessible | current | The table for Secure Shell Connection. |
| 1.3.6.1.4.1.259.10.1.5.1.17.6.6.1 | RowsshConnInfoEntry | not-accessible | current | The conceptual row for sshConnInfoTable. |
| 1.3.6.1.4.1.259.10.1.5.1.17.6.6.1.1 | ColumnsshConnID | not-accessible | current | The connection ID of the Secure Shell Connection. |
| 1.3.6.1.4.1.259.10.1.5.1.17.6.6.1.2 | ColumnsshConnMajorVersion | read-only | current | The SSH major version. |
| 1.3.6.1.4.1.259.10.1.5.1.17.6.6.1.3 | ColumnsshConnMinorVersion | read-only | current | The SSH minor version. |
| 1.3.6.1.4.1.259.10.1.5.1.17.6.6.1.5 | ColumnsshConnStatus | read-only | current | The SSH connection State. negotiationStart(1) means the SSH is in its negotiation start state, authenticationStart(2) means the SSH is in authentication start … |
| 1.3.6.1.4.1.259.10.1.5.1.17.6.6.1.6 | ColumnsshConnUserName | read-only | current | The user name of the connection. |
| 1.3.6.1.4.1.259.10.1.5.1.17.6.6.1.7 | ColumnsshDisconnect | read-write | current | Set the variable to disconnect the connection, noDisconnect(1) will always be obtained when reading this variable. |
| 1.3.6.1.4.1.259.10.1.5.1.17.6.6.1.8 | ColumnsshConnEncryptionTypeStr | read-only | current | The encryption type of the SSH. |
| 1.3.6.1.4.1.259.10.1.5.1.17.6.7 | ScalarsshKeySize | read-write | current | The SSH server key size. |
| 1.3.6.1.4.1.259.10.1.5.1.17.6.8 | ScalarsshRsaHostKey1 | read-only | current | The RSA host key segment 1. |
| 1.3.6.1.4.1.259.10.1.5.1.17.6.9 | ScalarsshRsaHostKey2 | read-only | current | The RSA host key segment 2. |
| 1.3.6.1.4.1.259.10.1.5.1.17.6.10 | ScalarsshRsaHostKey3 | read-only | current | The RSA host key segment 3. |
| 1.3.6.1.4.1.259.10.1.5.1.17.6.11 | ScalarsshRsaHostKey4 | read-only | current | The RSA host key segment 4. |
| 1.3.6.1.4.1.259.10.1.5.1.17.6.12 | ScalarsshRsaHostKey5 | read-only | current | The RSA host key segment 5. |
| 1.3.6.1.4.1.259.10.1.5.1.17.6.13 | ScalarsshRsaHostKey6 | read-only | current | The RSA host key segment 6. |
| 1.3.6.1.4.1.259.10.1.5.1.17.6.14 | ScalarsshRsaHostKey7 | read-only | current | The RSA host key segment 7. |
| 1.3.6.1.4.1.259.10.1.5.1.17.6.15 | ScalarsshRsaHostKey8 | read-only | current | The RSA host key segment 8. |
| 1.3.6.1.4.1.259.10.1.5.1.17.6.16 | ScalarsshDsaHostKey1 | read-only | current | The DSA host key segment 1. |
| 1.3.6.1.4.1.259.10.1.5.1.17.6.17 | ScalarsshDsaHostKey2 | read-only | current | The DSA host key segment 2. |
| 1.3.6.1.4.1.259.10.1.5.1.17.6.18 | ScalarsshDsaHostKey3 | read-only | current | The DSA host key segment 3. |
| 1.3.6.1.4.1.259.10.1.5.1.17.6.19 | ScalarsshDsaHostKey4 | read-only | current | The DSA host key segment 4. |
| 1.3.6.1.4.1.259.10.1.5.1.17.6.20 | ScalarsshDsaHostKey5 | read-only | current | The DSA host key segment 5. |
| 1.3.6.1.4.1.259.10.1.5.1.17.6.21 | ScalarsshDsaHostKey6 | read-only | current | The DSA host key segment 6. |
| 1.3.6.1.4.1.259.10.1.5.1.17.6.22 | ScalarsshDsaHostKey7 | read-only | current | The DSA host key segment 7. |
| 1.3.6.1.4.1.259.10.1.5.1.17.6.23 | ScalarsshDsaHostKey8 | read-only | current | The DSA host key segment 8. |
| 1.3.6.1.4.1.259.10.1.5.1.17.6.24 | ScalarsshHostKeyGenAction | read-write | current | This variable is for host key generating. For the set behavior: Set it to genRsaKey(2) to generate the RSA host key, and to genDsaKey(3) to generate the DSA ho… |
| 1.3.6.1.4.1.259.10.1.5.1.17.6.25 | ScalarsshHostKeyGenStatus | read-only | current | The result of the last KeyGen status. if no key gen action has been performed. you will get unknown(1) status. |
| 1.3.6.1.4.1.259.10.1.5.1.17.6.26 | ScalarsshHostKeySaveAction | read-write | current | To save host key from memory to flash. For the set behavior: Set it to save(2) to perform the save operation. For the get behavior: You will get save(1) when t… |
| 1.3.6.1.4.1.259.10.1.5.1.17.6.27 | ScalarsshHostKeySaveStatus | read-only | current | The result of the last savekey status. If no save action has been performed, you will get unknown(1) status. |
| 1.3.6.1.4.1.259.10.1.5.1.17.6.28 | ScalarsshHostKeyDelAction | read-write | current | To delete the host key. For the set behavior: Set it to delRsaKey(2) to delete the RSA host key, to delDsaKey(3) to delete the DSA host key, or to delBothKeys(… |
| 1.3.6.1.4.1.259.10.1.5.1.17.6.29 | TablesshUserTable | not-accessible | current | The conceptual table of all of sshUserEntry. |
| 1.3.6.1.4.1.259.10.1.5.1.17.6.29.1 | RowsshUserEntry | not-accessible | current | The conceptual row for sshUserTable. |
| 1.3.6.1.4.1.259.10.1.5.1.17.6.29.1.1 | ColumnsshUserName | not-accessible | current | User Name. |
| 1.3.6.1.4.1.259.10.1.5.1.17.6.29.1.2 | ColumnsshUserRsaKey1 | read-only | current | The RSA user key segment 1. |
| 1.3.6.1.4.1.259.10.1.5.1.17.6.29.1.3 | ColumnsshUserRsaKey2 | read-only | current | The RSA user key segment 2. |
| 1.3.6.1.4.1.259.10.1.5.1.17.6.29.1.4 | ColumnsshUserRsaKey3 | read-only | current | The RSA user key segment 3. |
| 1.3.6.1.4.1.259.10.1.5.1.17.6.29.1.5 | ColumnsshUserRsaKey4 | read-only | current | The RSA user key segment 4. |
| 1.3.6.1.4.1.259.10.1.5.1.17.6.29.1.6 | ColumnsshUserRsaKey5 | read-only | current | The RSA user key segment 5. |
| 1.3.6.1.4.1.259.10.1.5.1.17.6.29.1.7 | ColumnsshUserRsaKey6 | read-only | current | The RSA user key segment 6. |
| 1.3.6.1.4.1.259.10.1.5.1.17.6.29.1.8 | ColumnsshUserRsaKey7 | read-only | current | The RSA user key segment 7. |
| 1.3.6.1.4.1.259.10.1.5.1.17.6.29.1.9 | ColumnsshUserRsaKey8 | read-only | current | The RSA user key segment 8. |
| 1.3.6.1.4.1.259.10.1.5.1.17.6.29.1.10 | ColumnsshUserDsaKey1 | read-only | current | The DSA user key segment 1. |
| 1.3.6.1.4.1.259.10.1.5.1.17.6.29.1.11 | ColumnsshUserDsaKey2 | read-only | current | The DSA user key segment 2. |
| 1.3.6.1.4.1.259.10.1.5.1.17.6.29.1.12 | ColumnsshUserDsaKey3 | read-only | current | The DSA user key segment 3. |
| 1.3.6.1.4.1.259.10.1.5.1.17.6.29.1.13 | ColumnsshUserDsaKey4 | read-only | current | The DSA user key segment 4. |
| 1.3.6.1.4.1.259.10.1.5.1.17.6.29.1.14 | ColumnsshUserDsaKey5 | read-only | current | The DSA user key segment 5. |
| 1.3.6.1.4.1.259.10.1.5.1.17.6.29.1.15 | ColumnsshUserDsaKey6 | read-only | current | The DSA user key segment 6. |
| 1.3.6.1.4.1.259.10.1.5.1.17.6.29.1.16 | ColumnsshUserDsaKey7 | read-only | current | The DSA user key segment 7. |
| 1.3.6.1.4.1.259.10.1.5.1.17.6.29.1.17 | ColumnsshUserDsaKey8 | read-only | current | The DSA user key segment 8. |
| 1.3.6.1.4.1.259.10.1.5.1.17.6.29.1.18 | ColumnsshUserKeyDelAction | read-write | current | To delete the user key. For the set behavior: Set it to delRsaKey(2) to delete the RSA user key, to delDsaKey(3) to delete the DSA user key, or to delBothKeys(… |
| 1.3.6.1.4.1.259.10.1.5.1.17.7 | NodeaclMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.17.7.1 | TableaclIpAceTable | not-accessible | current | The conceptual table of all of aclIpAceEntry. |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.1.1 | RowaclIpAceEntry | not-accessible | current | The conceptual row for aclIpAceTable. |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.1.1.1 | ColumnaclIpAceIndex | not-accessible | current | An index that uniquely identifies an entry in the IP ACE table. |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.1.1.2 | ColumnaclIpAceType | read-create | current | The specified IP ACE type. When the type of this entry is modified, then this entry will be auto-unbound from the aclEntry and the not supporting field of this… |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.1.1.3 | ColumnaclIpAceAccess | read-create | current | Indicates the action to be taken if a packet matches this ACE. This object cannot not be configured when the status of the entry, aclIpAceStatus, is active(1). |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.1.1.4 | ColumnaclIpAceSourceIpAddr | read-create | current | The specified source IP address. The packet's source address is AND-ed with the value of aclIpAceSourceIpAddrBitmask and then compared against the value of thi… |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.1.1.5 | ColumnaclIpAceSourceIpAddrBitmask | read-create | current | The specified source IP address mask. The packet's source address is AND-ed with the value of IpAceSourceIpAddr and then compared against the value of this obj… |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.1.1.6 | ColumnaclIpAceDestIpAddr | read-create | current | The specified destination IP address. The packet's destination address is AND-ed with the value of aclIpAceDestIpAddrBitmask and then compared against the valu… |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.1.1.7 | ColumnaclIpAceDestIpAddrBitmask | read-create | current | The specified destination IP address mask. This object may not be modified if the associated aclIpAceType object is equal to standard(1). |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.1.1.8 | ColumnaclIpAceProtocol | read-create | current | The protocol number field in the IP header used to indicate the higher layer protocol as specified in RFC 1700. A value of 0 matches every IP packet. The objec… |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.1.1.9 | ColumnaclIpAcePrec | read-create | current | Specifies the IP precedence value to match against. The value of this object is ignored whenever the value of aclIpAcePrec object is 8. This object may not be … |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.1.1.10 | ColumnaclIpAceTos | read-create | current | Specifies the IP ToS facility value to match against. The value of this object is ignored whenever the value of aclIpAcePrec object is 9. This object may not b… |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.1.1.11 | ColumnaclIpAceDscp | read-create | current | Specifies the DSCP value to match against. The value of this object is ignored whenever the value of aclIpAcePrec object is 64. This object may not be modified… |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.1.1.12 | ColumnaclIpAceSourcePortOp | read-create | current | Indicates how a packet's source TCP/UDP port number is to be compared. noOperator(1), which is the default value, means no comparison is to be made with the so… |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.1.1.13 | ColumnaclIpAceMinSourcePort | read-create | current | If the aclIpAceSourcePortOp is range(3), this indicates the lower bound of the TCP/UDP port number value range. This object may not be modified if the associat… |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.1.1.14 | ColumnaclIpAceMaxSourcePort | read-create | current | If the aclIpAceSourcePortOp is range(3), this indicates the upper bound of the TCP/UDP port number value range. |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.1.1.15 | ColumnaclIpAceSourcePortBitmask | read-create | current | If the aclIpAceSourcePortOp is equal(2), this indicates the bitmask of the aclIpAceMinSourcePort. This object may not be modified if the associated aclIpAceTyp… |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.1.1.16 | ColumnaclIpAceDestPortOp | read-create | current | Indicates how a packet's destination TCP/UDP port number is to be compared. noOperator(1), which is the default value, means that no comparison is to be made w… |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.1.1.17 | ColumnaclIpAceMinDestPort | read-create | current | If the aclIpAceDestPortOp is range(3), this indicates the lower bound of the TCP/UDP port number value range. This object may not be modified if the associated… |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.1.1.18 | ColumnaclIpAceMaxDestPort | read-create | current | If the aclIpAceDestPortOp is range(3), this indicates the upper bound of the TCP/UDP port number value range. |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.1.1.19 | ColumnaclIpAceDestPortBitmask | read-create | current | If the aclIpAceDestPortOp is equal(2), this indicates the bitmask of the aclIpAceMinDestPort. This object may not be modified if the associated aclIpAceType ob… |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.1.1.20 | ColumnaclIpAceControlCode | read-create | current | Indicates how the control flags of TCP packets are to be compared. aclIpAceControlCode is AND-ed with aclIpAceControlCodeBitmask. This object may not be modifi… |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.1.1.21 | ColumnaclIpAceControlCodeBitmask | read-create | current | Indicates how the control flags of TCP packets are to be compared. It can be used to check multiple flags of the FIN, SYN, RST, PSH, ACK, URG by the sum of FIN… |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.1.1.22 | ColumnaclIpAceStatus | read-create | current | The status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: -… |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.2 | TableaclMacAceTable | not-accessible | current | The conceptual table of all of aclMacAceEntry. |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.2.1 | RowaclMacAceEntry | not-accessible | current | The conceptual row for aclMacAceTable. |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.2.1.1 | ColumnaclMacAceIndex | not-accessible | current | An index that uniquely identifies an entry in the MAC ACE table. |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.2.1.2 | ColumnaclMacAceAccess | read-create | current | Indicates the action to be taken if a packet matches this ACE. This object cannot be configured when the status of the entry, aclMacAceStatus, is active(1). |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.2.1.3 | ColumnaclMacAcePktformat | read-create | current | Used to check the packet format of the packets. This object cannot be configured when the status of the entry, aclMacAceStatus, is active(1). |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.2.1.4 | ColumnaclMacAceSourceMacAddr | read-create | current | Indicates the 48-bit destination MAC address. The specified source MAC of the packet The packet's source MAC address is AND-ed with the value of aceMacSourceMa… |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.2.1.5 | ColumnaclMacAceSourceMacAddrBitmask | read-create | current | The specified source MAC address mask. This object cannot be configured when the status of the entry, aclMacAceStatus, is active(1). |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.2.1.6 | ColumnaclMacAceDestMacAddr | read-create | current | Indicates the 48-bit destination MAC address. The specified destination MAC of the packet. The packet's destination MAC address is AND-ed with the value of ace… |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.2.1.7 | ColumnaclMacAceDestMacAddrBitmask | read-create | current | The specified destination MAC address mask. This object cannot be configured when the status of the entry, aclMacAceStatus, is active(1). |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.2.1.8 | ColumnaclMacAceVidOp | read-create | current | Indicates how a packet's vid is to be compared. This object cannot be configured when the status of the entry, aclMacAceStatus, is active(1). |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.2.1.9 | ColumnaclMacAceMinVid | read-create | current | Indicates the lower bound of the vid value range if the aclMacAceVidOp is range(3). This object cannot be configured when the status of the entry, aclMacAceSta… |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.2.1.10 | ColumnaclMacAceVidBitmask | read-create | current | The bitmask of vid if the aclMacAceVidOp is equal, default value is 0xfff. |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.2.1.11 | ColumnaclMacAceMaxVid | read-create | current | Indicates the upper bound of the vid value range if the aclMacAceVidOp is range(3). This object cannot be configured when the status of the entry, aclMacAceSta… |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.2.1.12 | ColumnaclMacAceEtherTypeOp | read-create | current | Indicates how a packet's ethertype is to be compared. This object cannot be configured when the status of the entry, aclMacAceStatus, is active(1). |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.2.1.13 | ColumnaclMacAceEtherTypeBitmask | read-create | current | The bitmask of ether type if the aclMacAceVidOp is equal(2), default value is 0xFFFF. |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.2.1.14 | ColumnaclMacAceMinEtherType | read-create | current | Indicates the lower bound of the ether type value range if the aclMacAceEtherTypeOp is range(3). This object cannot be configured when the status of the entry,… |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.2.1.15 | ColumnaclMacAceMaxEtherType | read-create | current | Indicates the upper bound of the ether type value range if the aclMacAceEtherTypeOp is range(3). This object cannot be configured when the status of the entry,… |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.2.1.16 | ColumnaclMacAceStatus | read-create | current | The status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: -… |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.3 | TableaclAclGroupTable | not-accessible | current | The conceptual table of aclAclGroupEntry. |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.3.1 | RowaclAclGroupEntry | not-accessible | current | The conceptual row for aclAclGroupTable. |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.3.1.1 | ColumnaclAclGroupIfIndex | not-accessible | current | The interface number specifying the ACL binding to. |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.3.1.2 | ColumnaclAclGroupIngressIpAcl | read-write | current | Specifies the ingress IP ACL(standard or extended) binding to the interface. |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.3.1.3 | ColumnaclAclGroupEgressIpAcl | read-write | current | Specifies the egress IP ACL(standard or extended) binding to the interface. |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.3.1.4 | ColumnaclAclGroupIngressMacAcl | read-write | current | Specifies the ingress MAC ACL binding to the interface. |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.3.1.5 | ColumnaclAclGroupEgressMacAcl | read-write | current | Specifies the egress MAC ACL binding to the interface. |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.12 | TableaclIpv6AceTable | not-accessible | current | Table for IPv6 ACE. |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.12.1 | RowaclIpv6AceEntry | not-accessible | current | Entry fo IPv6 ACE. |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.12.1.1 | ColumnaclIpv6AceIndex | not-accessible | current | An index that uniquely identifies an entry in the IPv6 table. |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.12.1.2 | ColumnaclIpv6AceType | read-create | current | The specified IP v6 ACE type. When the type of this entry is modified, then this entry will be auto-unbound from the aclEntry and the not supporting field of t… |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.12.1.3 | ColumnaclIpv6AceAccess | read-create | current | Indicates the action to be taken if a packet matches this ACE. |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.12.1.4 | ColumnaclIpv6AceSourceIpAddr | read-create | current | Specifies the source IPv6 address. |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.12.1.5 | ColumnaclIpv6AceSourceIpAddrPrefixLen | read-create | current | The length (in bits) associated with the source IPv6 address prefix of this entry. |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.12.1.6 | ColumnaclIpv6AceDestIpAddr | read-create | current | Specifies the destination IPv6 address. This object may not be modified if the associated aclIpv6AceType object is equal to standard(1). |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.12.1.7 | ColumnaclIpv6AceDestIpAddrPrefixLen | read-create | current | The length (in bits) associated with the destination IPv6 address prefix of this entry. This object may not be modified if the associated aclIpv6AceType object… |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.12.1.9 | ColumnaclIpv6AceDscp | read-create | current | Specifies the DSCP value to match against. This object may not be modified if the associated aclIpv6AceType object is equal to standard(1). |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.12.1.11 | ColumnaclIpv6AceStatus | read-create | current | This object is used to create a new row or modify or delete an existing row in this table. The status column has six defined values: The status column has six … |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.13 | NodeaclAttachCtlMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.17.7.13.1 | ScalaraclAttachCtlIndex | read-write | current | Index for attachment control. Specifies the ACL as the target to relate with the IP ACE, the MAC ACE or IPv6 ACE. The ACL identified by a particular value of t… |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.13.2 | ScalaraclAttachCtlAceType | read-write | current | Type for attachment control. Specifies the type of aclAttachCtlAceIndex to relate with the aclAttachCtlIndex. When the type is macAce(1), the index of aclAceIn… |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.13.3 | ScalaraclAttachCtlAceIndex | read-write | current | Index for attachment control. Specifies the ACE to relate with the aclAttachCtlIndex. When aclAttachCtlAceType is macAce(1), the value of aclAttachCtlIndex is … |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.13.4 | ScalaraclAttachCtlAction | read-write | current | Action for attachment control. When setting this object to attach(2) to begin the attaching operation, a particular ACE is attached to a particular ACL. When s… |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.14 | TableaclTable | not-accessible | current | Table for ACL. |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.14.1 | RowaclEntry | not-accessible | current | Entry for ACL. |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.14.1.1 | ColumnaclIndex | not-accessible | current | An index that uniquely identifies an entry in the ACL table. |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.14.1.2 | ColumnaclName | read-create | current | The name of this entry. |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.14.1.3 | ColumnaclType | read-create | current | The type of this entry. When the value of ACL type is modified, then the ACEs in the aclAceIndexList of this entry will be auto-removed, and this entry will be… |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.14.1.4 | ColumnaclAceIndexList | read-only | current | The octet string containes the ACE indexes. Two octets express one index and it is represented in network order. This index list indicates the particular ACEs … |
| 1.3.6.1.4.1.259.10.1.5.1.17.7.14.1.5 | ColumnaclStatus | read-create | current | This object is used to create a new row or modify or delete an existing row in this table. The status column has six defined values: - 'active', which indicate… |
| 1.3.6.1.4.1.259.10.1.5.1.17.9 | NodeipFilterMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.17.9.12 | TableipFilterSnmpInetTable | not-accessible | current | A list of IP address entries. |
| 1.3.6.1.4.1.259.10.1.5.1.17.9.12.1 | RowipFilterSnmpInetEntry | not-accessible | current | This entry includes an IP address range which the system will allow to connect to this device through SNMP. |
| 1.3.6.1.4.1.259.10.1.5.1.17.9.12.1.1 | ColumnipFilterSnmpInetAddressType | not-accessible | current | The type of IP address filter. Only supports IPv4 and IPv6 address types. |
| 1.3.6.1.4.1.259.10.1.5.1.17.9.12.1.2 | ColumnipFilterSnmpInetAddressStart | not-accessible | current | The start IP address. |
| 1.3.6.1.4.1.259.10.1.5.1.17.9.12.1.3 | ColumnipFilterSnmpInetAddressEnd | read-create | current | The end IP address. |
| 1.3.6.1.4.1.259.10.1.5.1.17.9.12.1.4 | ColumnipFilterSnmpInetStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.259.10.1.5.1.17.9.13 | TableipFilterHttpInetTable | not-accessible | current | A list of IP address entries. |
| 1.3.6.1.4.1.259.10.1.5.1.17.9.13.1 | RowipFilterHttpInetEntry | not-accessible | current | This entry includes an IP address range which the system will allow to connect to this device through SNMP. |
| 1.3.6.1.4.1.259.10.1.5.1.17.9.13.1.1 | ColumnipFilterHttpInetAddressType | not-accessible | current | The type of IP address filter . Only supports IPv4 and IPv6 address types. |
| 1.3.6.1.4.1.259.10.1.5.1.17.9.13.1.2 | ColumnipFilterHttpInetAddressStart | not-accessible | current | The start IP address. |
| 1.3.6.1.4.1.259.10.1.5.1.17.9.13.1.3 | ColumnipFilterHttpInetAddressEnd | read-create | current | The end IP address. |
| 1.3.6.1.4.1.259.10.1.5.1.17.9.13.1.4 | ColumnipFilterHttpInetStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.259.10.1.5.1.17.9.14 | TableipFilterTelnetInetTable | not-accessible | current | A list of IP address entries. |
| 1.3.6.1.4.1.259.10.1.5.1.17.9.14.1 | RowipFilterTelnetInetEntry | not-accessible | current | This entry includes an IP address range which the system will allow them to connect to this device through SNMP. |
| 1.3.6.1.4.1.259.10.1.5.1.17.9.14.1.1 | ColumnipFilterTelnetInetAddressType | not-accessible | current | The type of IP address filter . Only supports IPv4 and IPv6 address types. |
| 1.3.6.1.4.1.259.10.1.5.1.17.9.14.1.2 | ColumnipFilterTelnetInetAddressStart | not-accessible | current | The start IP address. |
| 1.3.6.1.4.1.259.10.1.5.1.17.9.14.1.3 | ColumnipFilterTelnetInetAddressEnd | read-create | current | The end IP address. |
| 1.3.6.1.4.1.259.10.1.5.1.17.9.14.1.4 | ColumnipFilterTelnetInetStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.259.10.1.5.1.17.9.15 | NodeipFilterAllClientCtl | |||
| 1.3.6.1.4.1.259.10.1.5.1.17.9.15.1 | ScalaripFilterAllClientCtlInetAddressType | read-write | current | The type of IP address filter. Only supports IPv4 and IPv6 address types. |
| 1.3.6.1.4.1.259.10.1.5.1.17.9.15.2 | ScalaripFilterAllClientCtlInetAddressStart | read-write | current | The start IP address. |
| 1.3.6.1.4.1.259.10.1.5.1.17.9.15.3 | ScalaripFilterAllClientCtlInetAddressEnd | read-write | current | The end IP address. |
| 1.3.6.1.4.1.259.10.1.5.1.17.9.15.4 | ScalaripFilterAllClientCtlAction | read-write | current | Action for IP filter control. Set this object to create(2) to create entries in the ipFilterSnmpInetTable, ipFilterHttpInetTable and ipFilterTelnetInetTable. S… |
| 1.3.6.1.4.1.259.10.1.5.1.17.10 | NodeuserAuthMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.17.10.3 | ScalaruserAuthEnablePassword | read-write | current | Set enable password or delete enable password. NULL is used to delete the enable password. The password is starting with alphanumeric. |
| 1.3.6.1.4.1.259.10.1.5.1.17.10.4 | ScalaruserAuthMethod | read-write | current | Set user authencation method for system. |
| 1.3.6.1.4.1.259.10.1.5.1.17.10.5 | TableuserAuthTable | not-accessible | current | This table is for creating the new user. |
| 1.3.6.1.4.1.259.10.1.5.1.17.10.5.1 | RowuserAuthEntry | not-accessible | current | Entries in this table correspond to the users entries in system. |
| 1.3.6.1.4.1.259.10.1.5.1.17.10.5.1.1 | ColumnuserAuthUserName | not-accessible | current | The name of the user. The user name is starting with alphanumeric. |
| 1.3.6.1.4.1.259.10.1.5.1.17.10.5.1.2 | ColumnuserAuthPassword | read-create | current | Specifies the user password. zero length input will set the user enrty without password. If the user is not exist, it will create the user with the giving pass… |
| 1.3.6.1.4.1.259.10.1.5.1.17.10.5.1.3 | ColumnuserAuthPrivilege | read-create | current | Specifies the user level. If the user is not exist, it will create the user with the giving privilege with none password. Privilege 15 is maximum privilege tha… |
| 1.3.6.1.4.1.259.10.1.5.1.17.10.5.1.4 | ColumnuserAuthPublicKey | read-only | current | User public key, the value can be 'RSA' or 'DSA' or 'Both' or 'None'. |
| 1.3.6.1.4.1.259.10.1.5.1.17.10.5.1.5 | ColumnuserAuthStatus | read-create | current | This node is used to create the user entry by '1' and to delete one user entry by '0'. |
| 1.3.6.1.4.1.259.10.1.5.1.17.11 | Nodedot1xMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.17.11.1 | Tabledot1xAuthConfigExtTable | not-accessible | current | The extension table of dot1xAuthConfigTable. |
| 1.3.6.1.4.1.259.10.1.5.1.17.11.1.1 | Rowdot1xAuthConfigExtEntry | not-accessible | current | The entry of dot1xAuthConfigExtTable. |
| 1.3.6.1.4.1.259.10.1.5.1.17.11.1.1.1 | Columndot1xAuthConfigExtOperMode | read-write | current | The operation mode of dot1x port which allows host connection to 802.1x-authorized ports. |
| 1.3.6.1.4.1.259.10.1.5.1.17.11.1.1.2 | Columndot1xAuthConfigExtMultiHostMaxCnt | read-write | current | The maximum number of hosts when the dot1xAuthConfigExtOperMode is multiHost(2). When the operation Mode is singleHost(1), we can ignore this variables. |
| 1.3.6.1.4.1.259.10.1.5.1.17.11.1.1.3 | Columndot1xAuthConfigExtPortIntrusionAction | read-write | current | Responses to intrusion when the authentication is failed; block-traffic(1) means that to block traffic when the authentication is failed and guest-vlan(2) mean… |
| 1.3.6.1.4.1.259.10.1.5.1.17.11.3 | Scalardot1xEapolPassThrough | read-write | current | When this variable is enabled(1), EAPOL frames will be forwarded to all ports where the Spanning Tree status is forwarding. When this variable is disabled(2), … |
| 1.3.6.1.4.1.259.10.1.5.1.17.12 | NodeaaaMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.17.12.1 | TableaaaMethodTable | not-accessible | current | Contains the settings needed for accounting. |
| 1.3.6.1.4.1.259.10.1.5.1.17.12.1.1 | RowaaaMethodEntry | not-accessible | current | A conceptual row in the aaaMethodTable. |
| 1.3.6.1.4.1.259.10.1.5.1.17.12.1.1.1 | ColumnaaaMethodIndex | not-accessible | current | Specifies the index for the entry. |
| 1.3.6.1.4.1.259.10.1.5.1.17.12.1.1.2 | ColumnaaaMethodName | read-create | current | Name for the method. |
| 1.3.6.1.4.1.259.10.1.5.1.17.12.1.1.3 | ColumnaaaMethodGroupName | read-create | current | Name for the server to use, pointing to aaaRadiusGroupName or aaaTacacsPlusGroupName. |
| 1.3.6.1.4.1.259.10.1.5.1.17.12.1.1.4 | ColumnaaaMethodMode | read-create | current | start-stop(1),sends a 'start' accounting notice at the beginning of a process and a 'stop' accounting notice at the end of a process. The 'start' accounting re… |
| 1.3.6.1.4.1.259.10.1.5.1.17.12.1.1.5 | ColumnaaaMethodStatus | read-create | current | Set to 1 to initiate the aaaMethodTable, 2 to destroy the table. |
| 1.3.6.1.4.1.259.10.1.5.1.17.12.1.1.6 | ColumnaaaMethodClientType | read-create | current | dot1x(1): Provides accounting service for 802.1x activity; exec(2): Provides accounting service for EXEC connection such as Telnet, SSH or console. |
| 1.3.6.1.4.1.259.10.1.5.1.17.12.2 | TableaaaRadiusGroupTable | not-accessible | current | Uses a subset of RADIUS servers for accounting as defined by the server group |
| 1.3.6.1.4.1.259.10.1.5.1.17.12.2.1 | RowaaaRadiusGroupEntry | not-accessible | current | A conceptual row of aaaRadiusGroupEntry. |
| 1.3.6.1.4.1.259.10.1.5.1.17.12.2.1.1 | ColumnaaaRadiusGroupIndex | not-accessible | current | Specifies the index for the entry. |
| 1.3.6.1.4.1.259.10.1.5.1.17.12.2.1.2 | ColumnaaaRadiusGroupServerBitMap | read-create | current | Identifies which RADIUS sever to use, each bit points to each radius server. 80 (1000 0000) point to radius server 1, C0 (11000000) points to radius 1 and radi… |
| 1.3.6.1.4.1.259.10.1.5.1.17.12.2.1.3 | ColumnaaaRadiusGroupName | read-create | current | Uses a subset of servers for accounting as defined by the server group. The same name as aaaTacasPlusGroupName is not allowed. |
| 1.3.6.1.4.1.259.10.1.5.1.17.12.2.1.4 | ColumnaaaRadiusGroupStatus | read-create | current | Set to 1 to initiate the aaaRadiusGroupTable, 2 to destroy the table. |
| 1.3.6.1.4.1.259.10.1.5.1.17.12.3 | TableaaaTacacsPlusGroupTable | not-accessible | current | Uses a subset of TACACS+ servers for accounting as defined by the server group |
| 1.3.6.1.4.1.259.10.1.5.1.17.12.3.1 | RowaaaTacacsPlusGroupEntry | not-accessible | current | A conceptual row of aaaTacacsPlusGroupEntry. |
| 1.3.6.1.4.1.259.10.1.5.1.17.12.3.1.1 | ColumnaaaTacacsPlusGroupIndex | not-accessible | current | Specifies the index for the entry. |
| 1.3.6.1.4.1.259.10.1.5.1.17.12.3.1.2 | ColumnaaaTacacsPlusGroupServerBitMap | read-create | current | Identifies which TACACS+ sever to use. |
| 1.3.6.1.4.1.259.10.1.5.1.17.12.3.1.3 | ColumnaaaTacacsPlusGroupName | read-create | current | Uses a subset of servers for accounting as defined by the server group. We can't have the same name as aaaRadiusGroupName |
| 1.3.6.1.4.1.259.10.1.5.1.17.12.3.1.4 | ColumnaaaTacacsPlusGroupStatus | read-create | current | Set to 1 to initiate the aaaRadiusGroupTable, 2 to destroy the table. |
| 1.3.6.1.4.1.259.10.1.5.1.17.12.4 | ScalaraaaUpdate | read-write | current | Specifies the periodic interim accounting records to be sent to the accounting server and periodic intervals to send accounting update records(in minutes). |
| 1.3.6.1.4.1.259.10.1.5.1.17.12.5 | TableaaaAccountTable | not-accessible | current | Specifies an interface or a set of interfaces that the accounting method list will be applied to. |
| 1.3.6.1.4.1.259.10.1.5.1.17.12.5.1 | RowaaaAccountEntry | not-accessible | current | A conceptual row of aaaAccountTable. |
| 1.3.6.1.4.1.259.10.1.5.1.17.12.5.1.1 | ColumnaaaAccountIfIndex | not-accessible | current | Defined as the ifIndex |
| 1.3.6.1.4.1.259.10.1.5.1.17.12.5.1.2 | ColumnaaaAccountMethodName | read-create | current | Specifies the name of the list of accounting methods to use. If no method name is specified, the system uses the default. |
| 1.3.6.1.4.1.259.10.1.5.1.17.12.5.1.3 | ColumnaaaAccountProtocol | read-only | current | Get the protocol type of a list method to know which server (RADIUS or TACACS+) is in use. |
| 1.3.6.1.4.1.259.10.1.5.1.17.12.5.1.4 | ColumnaaaAccountStatus | read-create | current | Set to 1 to initiate the aaaRadiusGroupTable, 2 to destroy the table. |
| 1.3.6.1.4.1.259.10.1.5.1.17.12.9 | TableaaaAccExecTable | not-accessible | current | Specifies an interface or a set of interfaces that the accounting method list will be applied to. |
| 1.3.6.1.4.1.259.10.1.5.1.17.12.9.1 | RowaaaAccExecEntry | not-accessible | current | A conceptual row of aaaAccExecTable. |
| 1.3.6.1.4.1.259.10.1.5.1.17.12.9.1.1 | ColumnaaaAccExecIndex | not-accessible | current | The method of accessing CLI management. |
| 1.3.6.1.4.1.259.10.1.5.1.17.12.9.1.2 | ColumnaaaAccExecMethodName | read-create | current | Specifies the name of the list of accounting methods to use. If no method name is specified, the system uses the default. |
| 1.3.6.1.4.1.259.10.1.5.1.17.13 | NodenetworkAccessMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.17.13.2 | TablenetworkAccessPortTable | not-accessible | current | A table contains the information of network access about every port. |
| 1.3.6.1.4.1.259.10.1.5.1.17.13.2.1 | RownetworkAccessPortEntry | not-accessible | current | A conceptual row in the networkAccessPort table. |
| 1.3.6.1.4.1.259.10.1.5.1.17.13.2.1.1 | ColumnnetworkAccessPortPortIndex | not-accessible | current | The port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this port index is the same inte… |
| 1.3.6.1.4.1.259.10.1.5.1.17.13.2.1.2 | ColumnnetworkAccessPortDynamicVlan | read-write | current | Sets enabled(1) to enable dynamic VLAN assigment and sets disabled(2) to disable dynamic VLAN assigment. |
| 1.3.6.1.4.1.259.10.1.5.1.17.13.2.1.3 | ColumnnetworkAccessPortMaxMacCount | read-write | current | Specifies the maximum number of authenticated MAC address. |
| 1.3.6.1.4.1.259.10.1.5.1.17.13.2.1.4 | ColumnnetworkAccessPortMode | read-write | current | Specifies the secure port mode. enabled(1) means that Mac address authentication is used and disabled(2) means that the authentication is disabled. |
| 1.3.6.1.4.1.259.10.1.5.1.17.13.2.1.5 | ColumnnetworkAccessPortMacFilter | read-write | current | Specifies the MAC filter ID, Set this variable to zero to disable MAC filter. |
| 1.3.6.1.4.1.259.10.1.5.1.17.13.2.1.6 | ColumnnetworkAccessPortGuestVlan | read-write | current | Specifies the guest VLAN ID. To disable the VLAN, set the value to 0. |
| 1.3.6.1.4.1.259.10.1.5.1.17.13.2.1.7 | ColumnnetworkAccessPortLinkDetectionStatus | read-write | current | Set this object to enabled(1) to enable link detection. Set this object to disabled(2) to disable link detection. |
| 1.3.6.1.4.1.259.10.1.5.1.17.13.2.1.8 | ColumnnetworkAccessPortLinkDetectionMode | read-write | current | Specifies the detection event for a port. Set this object to linkUp(1) to detect a link-up event. Set this object to linkDown(2) to detect a link-down event. S… |
| 1.3.6.1.4.1.259.10.1.5.1.17.13.2.1.9 | ColumnnetworkAccessPortLinkDetectionAciton | read-write | current | Specifies the action to take when a networkAccessPortLinkDetection event is triggered. Set this object to trap(1) to send a trap when a networkAccessPortLinkDe… |
| 1.3.6.1.4.1.259.10.1.5.1.17.13.2.1.10 | ColumnnetworkAccessPortDynamicQos | read-write | current | Set this object to enabled(1) to enable Dynamic QoS. Set this object to disabled(2) to disable Dynamic QoS. |
| 1.3.6.1.4.1.259.10.1.5.1.17.13.3 | NodenetworkAccessClearMacAddressMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.17.13.3.1 | ScalarnetworkAccessClearMacAddressAttribute | read-write | current | Attribute for clearing Mac address. Specifies the certain attribute in Mac address table. all(1) indicates both reauthorized and learnt secure MAC address; sta… |
| 1.3.6.1.4.1.259.10.1.5.1.17.13.3.2 | ScalarnetworkAccessClearMacAddressMacAddress | read-write | current | Specifies MAC address in the MAC address table for clearing MAC address. '000000' represents that no MAC address is specified. |
| 1.3.6.1.4.1.259.10.1.5.1.17.13.3.3 | ScalarnetworkAccessClearMacAddressPort | read-write | current | The specifies port in the MAC address table for clearing MAC address. '0' represents that no port is specified. |
| 1.3.6.1.4.1.259.10.1.5.1.17.13.3.4 | ScalarnetworkAccessClearMacAddressAction | read-write | current | Action for clearing MAC address . When setting this object to clear(2) to begin the clearing MAC address operation, a particular MAC address is cleared from th… |
| 1.3.6.1.4.1.259.10.1.5.1.17.13.4 | TablenetworkAccessMacAddressTable | not-accessible | current | Contains the information of network access MAC addresses. |
| 1.3.6.1.4.1.259.10.1.5.1.17.13.4.1 | RownetworkAccessMacAddressEntry | not-accessible | current | A conceptual row in the networkAccessMacAddress table. |
| 1.3.6.1.4.1.259.10.1.5.1.17.13.4.1.1 | ColumnnetworkAccessMacAddressAddress | not-accessible | current | Specifies the authenticated MAC address. |
| 1.3.6.1.4.1.259.10.1.5.1.17.13.4.1.2 | ColumnnetworkAccessMacAddressPort | not-accessible | current | Specifies the port of authenticated MAC address. |
| 1.3.6.1.4.1.259.10.1.5.1.17.13.4.1.3 | ColumnnetworkAccessMacAddressInetAddressType | read-only | current | This object indicates the type of IP address denoted in networkAccessMacAddressRadiusServerInetAddress type. |
| 1.3.6.1.4.1.259.10.1.5.1.17.13.4.1.4 | ColumnnetworkAccessMacAddressRadiusServerInetAddress | read-only | current | Displays the IP address of radius server that authenticates the specified Mac address. |
| 1.3.6.1.4.1.259.10.1.5.1.17.13.4.1.5 | ColumnnetworkAccessMacAddressTime | read-only | current | Displays the authentication time of the authenticated MAC address. The following form is a text string; 'yyyy MMm DDd HHh MMm SSs'. 'yyyy' is a four-digit year… |
| 1.3.6.1.4.1.259.10.1.5.1.17.13.4.1.6 | ColumnnetworkAccessMacAddressAttribute | read-only | current | Displays the attribute of an authenticated MAC address. static(1) indicates resauthorized secure MAC address. dynamic(2) indicates learnt secure MAC address. |
| 1.3.6.1.4.1.259.10.1.5.1.17.13.5 | ScalarnetworkAccessAging | read-write | current | Set this object to enabled(1) to enable MAC address aging feature. Set this object to disabled(2) to disable MAC address aging feature. |
| 1.3.6.1.4.1.259.10.1.5.1.17.13.6 | TablenetworkAccessMacFilterWithMaskTable | not-accessible | current | Contains the settings for MAC filter. |
| 1.3.6.1.4.1.259.10.1.5.1.17.13.6.1 | RownetworkAccessMacFilterWithMaskEntry | not-accessible | current | A conceptual row in the networkAccessMacFilterWithMaskTable. |
| 1.3.6.1.4.1.259.10.1.5.1.17.13.6.1.1 | ColumnnetworkAccessMacFilterWithMaskID | not-accessible | current | Specifies the MAC filter ID. |
| 1.3.6.1.4.1.259.10.1.5.1.17.13.6.1.2 | ColumnnetworkAccessMacFilterWithMaskMacAddress | not-accessible | current | Specifies the MAC address to be filtered. |
| 1.3.6.1.4.1.259.10.1.5.1.17.13.6.1.3 | ColumnnetworkAccessMacFilterWithMaskMacAddressMask | not-accessible | current | Specifies the MAC mask to be filtered. |
| 1.3.6.1.4.1.259.10.1.5.1.17.13.6.1.4 | ColumnnetworkAccessMacFilterWithMaskStatus | read-create | current | Set this object to valid(1) to create an entry. Set this object to invalid(2) to destroy an entry. |
| 1.3.6.1.4.1.259.10.1.5.1.17.14 | NodemacAuthMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.17.14.1 | ScalarmacAuthReauthTime | read-write | current | Specifies the reauthentication time period. |
| 1.3.6.1.4.1.259.10.1.5.1.17.14.2 | TablemacAuthPortTable | not-accessible | current | Contains the settings for mac authentication of each port. |
| 1.3.6.1.4.1.259.10.1.5.1.17.14.2.1 | RowmacAuthPortEntry | not-accessible | current | A conceptual row in the macAuthPort table. |
| 1.3.6.1.4.1.259.10.1.5.1.17.14.2.1.1 | ColumnmacAuthPortIndex | not-accessible | current | The port and the trunk (including trunk members) interface of the port table. The interface identified by a particular value of this index is the same interfac… |
| 1.3.6.1.4.1.259.10.1.5.1.17.14.2.1.2 | ColumnmacAuthPortMaxMacCount | read-write | current | Specifies the maximum number of authenticated MAC addresses for MAC authentication. |
| 1.3.6.1.4.1.259.10.1.5.1.17.14.2.1.3 | ColumnmacAuthPortIntrusionAction | read-write | current | Responses to intrusion when the authentication is failed. block-traffic(1) : denies network access to an unauthorized client; pass-traffic(2) : allows unauthor… |
| 1.3.6.1.4.1.259.10.1.5.1.17.15 | NodewebAuthMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.17.15.1 | ScalarwebAuthSystemAuthControl | read-write | current | Sets enabled(1) to enable WebAuth feature and sets disabled(2) to disable WebAuth feature. |
| 1.3.6.1.4.1.259.10.1.5.1.17.15.5 | ScalarwebAuthSessionTimeout | read-write | current | For authenticated success users, they can use internet service during a certain period. Whenever this period expires, users need to be re-authenticated again. … |
| 1.3.6.1.4.1.259.10.1.5.1.17.15.6 | ScalarwebAuthQuietPeriod | read-write | current | Specifies the re-authentication interval when the authentication fail attempts reach the webAuthLoginAttempts value. Unauthenticated user won't be authenticate… |
| 1.3.6.1.4.1.259.10.1.5.1.17.15.7 | ScalarwebAuthLoginAttempts | read-write | current | Specifies the counter that configures the authentication fail times for a client. If authentication fail times reaches the specified value, the client are not … |
| 1.3.6.1.4.1.259.10.1.5.1.17.15.8 | NodewebAuthReauthenticateMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.17.15.8.1 | ScalarwebAuthReauthenticatePort | read-write | current | Specifies the port to re-authenticate for all of its authenticated hosts. |
| 1.3.6.1.4.1.259.10.1.5.1.17.15.8.2 | ScalarwebAuthReauthenticateInetAddressType | read-write | current | Specifies host type to re-authenticate. |
| 1.3.6.1.4.1.259.10.1.5.1.17.15.8.3 | ScalarwebAuthReauthenticateInetAddress | read-write | current | Specificies host to re-authenticate. |
| 1.3.6.1.4.1.259.10.1.5.1.17.15.8.4 | ScalarwebAuthReauthenticateAction | read-write | current | Action for WebAuth re-authenication. When setting this object to reauth(2) to begin the re-authenticated operation, a particular user is re-authenticated. When… |
| 1.3.6.1.4.1.259.10.1.5.1.17.15.9 | TablewebAuthPortConfigTable | not-accessible | current | Contains the settings for web authentication of each port. |
| 1.3.6.1.4.1.259.10.1.5.1.17.15.9.1 | RowwebAuthPortConfigEntry | not-accessible | current | A conceptual row in the webAuthPortConfigTable. |
| 1.3.6.1.4.1.259.10.1.5.1.17.15.9.1.1 | ColumnwebAuthPortConfigPortIndex | not-accessible | current | The port number of the port that may specify certain entry in the table which contains web authentication information. |
| 1.3.6.1.4.1.259.10.1.5.1.17.15.9.1.2 | ColumnwebAuthPortConfigStatus | read-write | current | Sets enabled(1) to enable web authentication feature for each port and sets disabled(2) to disable web authentication for each port. |
| 1.3.6.1.4.1.259.10.1.5.1.17.15.9.1.3 | ColumnwebAuthPortConfigAuthenticatedHostCount | read-only | current | Displays the authenticated host counts for each port |
| 1.3.6.1.4.1.259.10.1.5.1.17.15.10 | TablewebAuthPortInfoTable | not-accessible | current | Contains the information for web authentication of each port. |
| 1.3.6.1.4.1.259.10.1.5.1.17.15.10.1 | RowwebAuthPortInfoEntry | not-accessible | current | A conceptual row in the webAuthPortTable. |
| 1.3.6.1.4.1.259.10.1.5.1.17.15.10.1.1 | ColumnwebAuthPortInfoPortIndex | not-accessible | current | The port number for which this entry contains web authentication information. |
| 1.3.6.1.4.1.259.10.1.5.1.17.15.10.1.2 | ColumnwebAuthPortInfoPortAuthSuccessIndex | not-accessible | current | The authentication success number of port for which this entry contains web authentication information. |
| 1.3.6.1.4.1.259.10.1.5.1.17.15.10.1.3 | ColumnwebAuthPortInfoInetAddressType | read-only | current | This object indicates the type of IP address denoted in webAuthPortInfoIpAddress type. |
| 1.3.6.1.4.1.259.10.1.5.1.17.15.10.1.4 | ColumnwebAuthPortInfoInetAddress | read-only | current | The IP address which may specify the entry containing web authentication information. |
| 1.3.6.1.4.1.259.10.1.5.1.17.15.10.1.5 | ColumnwebAuthPortInfoRemainingSessiontime | read-only | current | The remaining session time for authenticated hosts. During this period, they may use internet resource. When the session time expires, they will need to re-aut… |
| 1.3.6.1.4.1.259.10.1.5.1.17.15.10.1.6 | ColumnwebAuthPortInfoStatus | read-only | current | Displays the web authentication status for each port. authenticated (1) means the user is authenticated. |
| 1.3.6.1.4.1.259.10.1.5.1.18 | Nodelayer3Mgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.18.1 | NodearpMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.18.1.1 | ScalararpCacheDeleteAll | read-write | current | To delete all dynamic entries in the ARP cache, write this variable to delete(1). Writing this variable to noDelete(2) has no effect on the device. When read, … |
| 1.3.6.1.4.1.259.10.1.5.1.18.1.2 | ScalararpCacheTimeout | read-write | current | Timeout is provided for entries in the ARP Cache. It is for dynamic mapping only. Static mapping by creating an entry that associates a logical address with a … |
| 1.3.6.1.4.1.259.10.1.5.1.18.1.3 | NodearpTrafficStatistics | |||
| 1.3.6.1.4.1.259.10.1.5.1.18.1.3.1 | ScalararpStatSendRequestPackets | read-only | current | The number of ARP Request packets sent by the ARP process. |
| 1.3.6.1.4.1.259.10.1.5.1.18.1.3.2 | ScalararpStatRcvRequestPackets | read-only | current | The number of ARP Request packets received by the ARP process. |
| 1.3.6.1.4.1.259.10.1.5.1.18.1.3.3 | ScalararpStatSendReplyPackets | read-only | current | The number of ARP Reply packets sent by the ARP process. |
| 1.3.6.1.4.1.259.10.1.5.1.18.1.3.4 | ScalararpStatRcvReplyPackets | read-only | current | The number of ARP Reply packets received by the ARP process. |
| 1.3.6.1.4.1.259.10.1.5.1.18.1.4 | TablearpProxyArpTable | not-accessible | current | A list of Proxy ARP status. This table has entries for all static VLANs. |
| 1.3.6.1.4.1.259.10.1.5.1.18.1.4.1 | RowarpProxyArpEntry | not-accessible | current | An entry in the table, containing information about Proxy ARP configuration. |
| 1.3.6.1.4.1.259.10.1.5.1.18.1.4.1.1 | ColumnarpProxyArpIfIndex | not-accessible | current | This is defined as a VLAN interface. A routing interface is a VLAN that binds an IP subnet. |
| 1.3.6.1.4.1.259.10.1.5.1.18.1.4.1.2 | ColumnarpProxyArpStatus | read-write | current | Enable or disable proxy ARP process on an interface. |
| 1.3.6.1.4.1.259.10.1.5.1.18.2 | NoderipMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.18.2.1 | NoderipBasicTimers | |||
| 1.3.6.1.4.1.259.10.1.5.1.18.2.1.1 | ScalarripUpdateBasicTimer | read-write | current | The update time in seconds controls the advertising of regular update messages. In the real implementation, the actual timer is this value offset by a random t… |
| 1.3.6.1.4.1.259.10.1.5.1.18.2.1.2 | ScalarripTimeoutBasicTimer | read-write | current | The timeout timer in seconds governs the validity of a route. It is initialized when a route is established, and any time an update message is received for the… |
| 1.3.6.1.4.1.259.10.1.5.1.18.2.1.3 | ScalarripGarbageCollectionBasicTimer | read-write | current | When the information about a route becomes invalid, the system does not immediately purge that route from its table. Instead, it continues to advertise the rou… |
| 1.3.6.1.4.1.259.10.1.5.1.18.2.2 | ScalarripRoutingProcessStatus | read-write | current | Enable or disable RIP routing process on a system. |
| 1.3.6.1.4.1.259.10.1.5.1.18.2.3 | ScalarripGlobalRouterVersion | read-write | current | To specify a RIP version used globally by the router. If interface version is configurated, router will use the interface configuration; and if version is not … |
| 1.3.6.1.4.1.259.10.1.5.1.18.2.4 | TableripInstabilityPreventingTable | not-accessible | current | A list of RIP instability preventing status. |
| 1.3.6.1.4.1.259.10.1.5.1.18.2.4.1 | RowripInstabilityPreventingEntry | not-accessible | current | An entry in the table, containing information about RIP instability preventing configuration. The ifIndex index is a VLAN's ifIndex. |
| 1.3.6.1.4.1.259.10.1.5.1.18.2.4.1.1 | ColumnripIfindex | not-accessible | current | This is defined as a VLAN interface. A routing interface is a VLAN and an IP subnet bound to it. |
| 1.3.6.1.4.1.259.10.1.5.1.18.2.4.1.2 | ColumnripSplitHorizonStatus | read-write | current | Enable or disable RIP poison reverse on an interface. |
| 1.3.6.1.4.1.259.10.1.5.1.18.2.5 | ScalarripStatisticsReset | read-write | current | Write it to reset(1), the following objects in RFC 1724 should be reset: 1. Global Counters: 'rip2GlobalRouteChanges', 'rip2GlobalQueries'. 2. Interface Status… |
| 1.3.6.1.4.1.259.10.1.5.1.18.2.6 | NoderipNetwork | |||
| 1.3.6.1.4.1.259.10.1.5.1.18.2.6.1 | TableripNetworkByInetAddrTable | not-accessible | current | The RIP network address table. |
| 1.3.6.1.4.1.259.10.1.5.1.18.2.6.1.1 | RowripNetworkByInetAddrEntry | not-accessible | current | A conceptual row of the ripNetworkByInetAddrTable. |
| 1.3.6.1.4.1.259.10.1.5.1.18.2.6.1.1.1 | ColumnripNetworkByInetAddrAddressType | not-accessible | current | The RIP Network address type. |
| 1.3.6.1.4.1.259.10.1.5.1.18.2.6.1.1.2 | ColumnripNetworkByInetAddrAddress | not-accessible | current | The RIP Network address. |
| 1.3.6.1.4.1.259.10.1.5.1.18.2.6.1.1.3 | ColumnripNetworkByInetAddrPfxLen | not-accessible | current | Network prefix length. |
| 1.3.6.1.4.1.259.10.1.5.1.18.2.6.1.1.4 | ColumnripNetworkByInetAddrStatus | read-create | current | Set this variable to create or destroy a RIP network address. |
| 1.3.6.1.4.1.259.10.1.5.1.18.2.6.2 | TableripNetworkByIfindexTable | not-accessible | current | The RIp network ifindex table. |
| 1.3.6.1.4.1.259.10.1.5.1.18.2.6.2.1 | RowripNetworkByIfindexEntry | not-accessible | current | A conceptual row of the ripNetworkByIfindexTable. |
| 1.3.6.1.4.1.259.10.1.5.1.18.2.6.2.1.1 | ColumnripNetworkIfindex | not-accessible | current | This is defined as a layer3 interface. |
| 1.3.6.1.4.1.259.10.1.5.1.18.2.6.2.1.2 | ColumnripNetworkByIfindexStatus | read-create | current | Set this variable to create or destroy a RIP network ifindex table. |
| 1.3.6.1.4.1.259.10.1.5.1.18.2.7 | TableripDistributeListTable | not-accessible | current | The RIP distribute list table. It's used to filter incoming or outgoing route updates using the access-list or prefix-list. |
| 1.3.6.1.4.1.259.10.1.5.1.18.2.7.1 | RowripDistributeListEntry | not-accessible | current | A conceptual row of the ripDistributelistTable. |
| 1.3.6.1.4.1.259.10.1.5.1.18.2.7.1.1 | ColumnripDistributeListInterfaceIndex | not-accessible | current | The index of the interface on which distribute-list is applied, If index is 0, the filter will be applied to all the interfaces. |
| 1.3.6.1.4.1.259.10.1.5.1.18.2.7.1.2 | ColumnripDistributeListType | not-accessible | current | Type of distribute-list applied: access-list or prefix-list. |
| 1.3.6.1.4.1.259.10.1.5.1.18.2.7.1.3 | ColumnripDistributeListIncomingRouteFilterName | read-create | current | Specifies access-list or prefix-list name to filter incoming routing updates. |
| 1.3.6.1.4.1.259.10.1.5.1.18.2.7.1.4 | ColumnripDistributeListOutgoingRouteFilterName | read-create | current | Specifies access-list or prefix-list name to filter outgoing routing updates. |
| 1.3.6.1.4.1.259.10.1.5.1.18.2.7.1.5 | ColumnripDistributeListStatus | read-create | current | Set this variable to create or destroy a distribute list. |
| 1.3.6.1.4.1.259.10.1.5.1.18.2.8 | TableripRedistributeTable | not-accessible | current | The RIP Redistribute table. Config rip redistribute type, metric. |
| 1.3.6.1.4.1.259.10.1.5.1.18.2.8.1 | RowripRedistributeEntry | not-accessible | current | A conceptual row of the ripRedistributeTable. |
| 1.3.6.1.4.1.259.10.1.5.1.18.2.8.1.1 | ColumnripRedistributeProtocol | not-accessible | current | |
| 1.3.6.1.4.1.259.10.1.5.1.18.2.8.1.2 | ColumnripRedistributeMetric | read-create | current | Metric value to be used in redistributing. |
| 1.3.6.1.4.1.259.10.1.5.1.18.2.8.1.3 | ColumnripRedistributeStatus | read-create | current | Set this variable to create or destroy redistribute information. |
| 1.3.6.1.4.1.259.10.1.5.1.18.2.9 | ScalarripDefaultMetric | read-write | current | A metric for redistribute routes. |
| 1.3.6.1.4.1.259.10.1.5.1.18.2.10 | TableripNeighborTable | not-accessible | current | The RIP neighbor table. |
| 1.3.6.1.4.1.259.10.1.5.1.18.2.10.1 | RowripNeighborEntry | not-accessible | current | A conceptual row of the ripNeighborTable. |
| 1.3.6.1.4.1.259.10.1.5.1.18.2.10.1.1 | ColumnripNeighborAddressType | not-accessible | current | The RIP Neighbor address type. |
| 1.3.6.1.4.1.259.10.1.5.1.18.2.10.1.2 | ColumnripNeighborAddress | not-accessible | current | The RIP Neighbor address. |
| 1.3.6.1.4.1.259.10.1.5.1.18.2.10.1.3 | ColumnripNeighborAddressStatus | read-create | current | Set this variable to create or destroy a RIP neighbor address. |
| 1.3.6.1.4.1.259.10.1.5.1.18.2.11 | TableripPassiveInterfaceTable | not-accessible | current | A list of RIP passive interface status. |
| 1.3.6.1.4.1.259.10.1.5.1.18.2.11.1 | RowripPassiveInterfaceEntry | not-accessible | current | An entry in the table, containing information about RIP passive interface(s) configuration. The index is a VLAN's ifIndex. |
| 1.3.6.1.4.1.259.10.1.5.1.18.2.11.1.1 | ColumnripInterfaceIndex | not-accessible | current | This is defined as a VLAN interface. A passive VLAN interface will suppress route updates on it. |
| 1.3.6.1.4.1.259.10.1.5.1.18.2.11.1.2 | ColumnripPassiveInterfaceStatus | read-create | current | Set this variable to create or destroy a RIP passive interface. |
| 1.3.6.1.4.1.259.10.1.5.1.18.2.12 | ScalarripMaxPrefix | read-write | current | Max number of RIP dynamic routes. |
| 1.3.6.1.4.1.259.10.1.5.1.18.2.13 | NoderipRouteClear | |||
| 1.3.6.1.4.1.259.10.1.5.1.18.2.13.1 | ScalarripRouteClearByType | read-write | current | Write this object value 2-6 to clear rip route by type, when read, this always return noClear(1). |
| 1.3.6.1.4.1.259.10.1.5.1.18.2.13.2 | TableripRouteClearByNetworkTable | not-accessible | current | Clear rip route by network address. |
| 1.3.6.1.4.1.259.10.1.5.1.18.2.13.2.1 | RowripRouteClearByNetworkEntry | not-accessible | current | Clear rip route by network address. |
| 1.3.6.1.4.1.259.10.1.5.1.18.2.13.2.1.1 | ColumnripRouteClearByNetworkInetAddrType | not-accessible | current | The RIP route network address type. |
| 1.3.6.1.4.1.259.10.1.5.1.18.2.13.2.1.2 | ColumnripRouteClearByNetworkInetAddr | not-accessible | current | The RIP route network address.Write this object to clear rip route by network address. |
| 1.3.6.1.4.1.259.10.1.5.1.18.2.13.2.1.3 | ColumnripRouteClearByNetworkPfxLen | not-accessible | current | The RIP route network prefix length. |
| 1.3.6.1.4.1.259.10.1.5.1.18.2.13.2.1.4 | ColumnripRouteClearByNetworkClearAction | read-write | current | Write this object value 2(clear) to clear rip route by spicify network address, when read, this always return noClear(1). |
| 1.3.6.1.4.1.259.10.1.5.1.18.2.14 | ScalarripDefaultInformationOriginate | read-write | current | Write this object value 2(originate) to originate default information, write this object value 1(noOriginate) to not originate default information. |
| 1.3.6.1.4.1.259.10.1.5.1.18.2.15 | NoderipDistance | |||
| 1.3.6.1.4.1.259.10.1.5.1.18.2.15.1 | ScalarripDefaultDistance | read-write | current | Default distance value. |
| 1.3.6.1.4.1.259.10.1.5.1.18.2.15.2 | TableripDistanceTable | not-accessible | current | Rip distance table |
| 1.3.6.1.4.1.259.10.1.5.1.18.2.15.2.1 | RowripDistanceEntry | not-accessible | current | Rip distance entry |
| 1.3.6.1.4.1.259.10.1.5.1.18.2.15.2.1.1 | ColumnripDistanceInetAddrType | not-accessible | current | The RIP distace table network address type. |
| 1.3.6.1.4.1.259.10.1.5.1.18.2.15.2.1.2 | ColumnripDistanceInetAddr | not-accessible | current | The RIP distance table network address. |
| 1.3.6.1.4.1.259.10.1.5.1.18.2.15.2.1.3 | ColumnripDistancePfxLen | not-accessible | current | The RIP distance table network prefix length. |
| 1.3.6.1.4.1.259.10.1.5.1.18.2.15.2.1.4 | ColumnripDistanceValue | read-write | current | The RIP distance table distance value. |
| 1.3.6.1.4.1.259.10.1.5.1.18.2.15.2.1.5 | ColumnripDistanceAlistName | read-create | current | The RIP distance table access list name. If delete the access list name ,set null string |
| 1.3.6.1.4.1.259.10.1.5.1.18.2.15.2.1.6 | ColumnripDistanceRowStatus | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3 | NodeospfMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.18.3.8 | TableospfMultiProcessSystemTable | not-accessible | current | A conceptually table for ospfMultiProcessSystemEntry. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.8.1 | RowospfMultiProcessSystemEntry | not-accessible | current | A conceptually row for ospfMultiProcessSystemTable. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.8.1.1 | ColumnospfMultiProcessProcessId | not-accessible | current | Process ID of an OSPF instance. You can create an OSPF instance from 0 to 65535 with its id. 0 is reserved for default process. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.8.1.2 | ColumnospfMultiProcessRouterIdType | read-only | current | Set router ID automatically or manually. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.8.1.3 | ColumnospfMultiProcessRfc1583CompatibleState | read-write | current | Enable or disable rfc1583 compatibility. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.8.1.4 | ColumnospfMultiProcessAutoCost | read-write | current | Set the reference bandwidth of auto cost, the unit is Mbps. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.8.1.5 | ColumnospfMultiProcessOriginateDefaultRoute | read-write | current | Enable or disable ASBR to generate a default external route into an OSPF domain if the default route already exists. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.8.1.6 | ColumnospfMultiProcessAdvertiseDefaultRoute | read-write | current | If 'always', always advertises default route regardless of whether the default route exists. Note that any operation on it will not take effect unless ospfMult… |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.8.1.7 | ColumnospfMultiProcessExternalMetricType | read-write | current | External link type associated with the default route advertised into the OSPF routing domain. Note that any operation on it will not take effect unless ospfMul… |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.8.1.8 | ColumnospfMultiProcessDefaultExternalMetric | read-write | current | Metric used for generating the default route. Note that any operation on it will not take effect unless ospfMultiProcessOriginateDefaultRoute has firstly been … |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.8.1.9 | ColumnospfMultiProcessSpfHoldTime | read-write | current | Sets the hold time between two consecutive SPF calculations. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.8.1.10 | ColumnospfMultiProcessAreaNumber | read-only | current | Records the OSPF area numbers. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.8.1.11 | ColumnospfMultiProcessAreaLimit | read-write | current | Max number of ospf area. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.8.1.17 | ColumnospfMultiProcessSystemStatus | read-create | current | The status of this conceptual row entry. This object is used to manage the creation and deletion of conceptual rows. Currently only support 4 status: 1. active… |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.8.1.18 | ColumnospfMultiProcessRouterId | read-write | current | A 32-bit integer uniquely identifying the router in the Autonomous System. By convention, to ensure uniqueness, this should default to the value of one of the … |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.8.1.19 | ColumnospfMultiProcessAdminStat | read-only | current | The administrative status of OSPF in the router. The value 'enabled' denotes that the OSPF Process is active on at least one interface; 'disabled' disables it … |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.8.1.20 | ColumnospfMultiProcessVersionNumber | read-only | current | The current version number of the OSPF protocol is 2. This is a private substitution for ospfVersionNumber of RFC1253. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.8.1.21 | ColumnospfMultiProcessAreaBdrRtrStatus | read-only | current | A flag to note whether this router is an Area Border Router. This is a private substitution for ospfAreaBdrRtrStatus of RFC1253. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.8.1.22 | ColumnospfMultiProcessASBdrRtrStatus | read-only | current | A flag to note whether this router is configured as an Autonomous System Border Router. This is a private substitution for ospfAreaBdrRtrStatus of RFC1253. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.8.1.23 | ColumnospfMultiProcessExternLsaCount | read-only | current | The number of external (LS type-5) link state advertisements in the link state database. This is a private substitution for ospfExternLsaCount of RFC1253. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.8.1.24 | ColumnospfMultiProcessExternLsaCksumSum | read-only | current | The 32-bit sum of the LS checksums of the external link state advertisements contained in the link state database. This sum can be used to determine if there h… |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.8.1.25 | ColumnospfMultiProcessOriginateNewLsas | read-only | current | The number of new link state advertisements that have been originated. This number is incremented each time the router originates a new LSA. Discontinuities in… |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.8.1.26 | ColumnospfMultiProcessRxNewLsas | read-only | current | The number of link state advertisements received that are determined to be new instantiations. This number does not include newer instantiations of self-origin… |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.8.1.30 | ColumnospfMultiProcessAsLsaCount | read-only | current | The number of AS-scope link state advertisements in the AS-scope link state database. This is a private substitution for ospfAsLsaCount of RFC4750. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.8.1.31 | ColumnospfMultiProcessSpfDelayTime | read-write | current | Sets the delay between receiving a change to SPF calculation. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.8.1.33 | ColumnospfMultiProcessDefaultMetric | read-write | current | The default metric for all redistributed routes. If the value is -1, then there is no default metric. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.9 | TableospfMultiProcessNssaTable | not-accessible | current | A conceptually table for ospfNssaEntry. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.9.1 | RowospfMultiProcessNssaEntry | not-accessible | current | A conceptually row for ospfNssaTable. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.9.1.1 | ColumnospfMultiProcessNssaAreaId | not-accessible | current | The 32-bit identifier for the NSSA. On creation, this can be derived from the instance. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.9.1.2 | ColumnospfMultiProcessNssaTranslatorRole | read-write | current | Specify NSSA-ABR translator-role. Candidate: Router may translate NSSA-LSA to Type-5 LSA if it is elected. Never: Router never translate NSSA-LSA. Always: Rout… |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.9.1.3 | ColumnospfMultiProcessNssaRedistributeStatus | read-create | current | Enabled or disabled to import routes only into the normal areas, but not into the NSSA area. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.9.1.4 | ColumnospfMultiProcessNssaOriginateDefaultInfoStatus | read-create | current | Enable or disable to generate a Type 7 default into the NSSA area. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.9.1.5 | ColumnospfMultiProcessNssaMetricType | read-write | current | Specify NSSA external metric type. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.9.1.6 | ColumnospfMultiProcessNssaMetric | read-write | current | Specify NSSA external metric value. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.9.1.7 | ColumnospfMultiProcessNssaStatus | read-create | current | The status of this conceptual row entry. This object is used to manage the creation and deletion of conceptual rows. Currently only support 4 status: 1. active… |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.9.1.8 | ColumnospfMultiProcessNssaTranslatorState | read-only | current | Indicates if and how an NSSA border router is performing NSSA translation of type-7 LSAs into type-5 LSAs. When this object is set to enabled, the NSSA Border … |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.10 | TableospfMultiProcessRedistributeTable | not-accessible | current | The conceptual table of all of ospfRedistributeEntry. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.10.1 | RowospfMultiProcessRedistributeEntry | not-accessible | current | The conceptual row for ospfRedistributeTable. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.10.1.1 | ColumnospfMultiProcessRedistributeProtocol | not-accessible | current | Protocol ID, type of the redistribute. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.10.1.2 | ColumnospfMultiProcessRedistributeMetricType | read-write | current | Metric type. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.10.1.3 | ColumnospfMultiProcessRedistributeMetric | read-write | current | Metric value. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.10.1.4 | ColumnospfMultiProcessRedistributeTag | read-write | current | The external route tag. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.10.1.5 | ColumnospfMultiProcessRedistributeFilterListName | read-write | current | List name of access filter which use in other routing protocols. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.10.1.6 | ColumnospfMultiProcessRedistributeStatus | read-create | current | The status of this conceptual row entry. This object is used to manage the creation and deletion of conceptual rows. Currently only support 4 status: 1. active… |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.10.1.7 | ColumnospfMultiProcessRedistributeRoutemapName | read-write | current | Name of the route map. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.11 | TableospfMultiProcessSummaryAddressTable | not-accessible | current | The conceptual table of all of ospfSummaryAddressEntry. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.11.1 | RowospfMultiProcessSummaryAddressEntry | not-accessible | current | The conceptual row for ospfSummaryAddressTable. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.11.1.1 | ColumnospfMultiProcessSummaryAddressType | not-accessible | current | Summary address type. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.11.1.2 | ColumnospfMultiProcessSummaryAddress | not-accessible | current | Summary address. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.11.1.3 | ColumnospfMultiProcessSummaryPfxLen | not-accessible | current | Summary address prefix length. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.11.1.4 | ColumnospfMultiProcessSummaryStatus | read-create | current | The status of this conceptual row entry. This object is used to manage the creation and deletion of conceptual rows. Currently only support 4 status: 1. active… |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.12 | TableospfMultiProcessNetworkAreaAddressTable | not-accessible | current | The conceptual table of all of ospfNetworkAreaAddressEntry. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.12.1 | RowospfMultiProcessNetworkAreaAddressEntry | not-accessible | current | The conceptual row for ospfNetworkAreaAddressTable. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.12.1.1 | ColumnospfMultiProcessNetworkAreaAddressType | not-accessible | current | NetworkArea address type. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.12.1.2 | ColumnospfMultiProcessNetworkAreaAddress | not-accessible | current | NetworkArea address. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.12.1.3 | ColumnospfMultiProcessNetworkAreaPfxLen | not-accessible | current | NetworkArea prefix length. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.12.1.4 | ColumnospfMultiProcessNetworkAreaAreaId | read-write | current | NetworkArea area ID. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.12.1.5 | ColumnospfMultiProcessNetworkAreaStatus | read-create | current | The status of this conceptual row entry. This object is used to manage the creation and deletion of conceptual rows. Currently only support 4 status: 1. active… |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.12.1.6 | ColumnospfMultiProcessNetworkAreaAreaId2 | read-write | current | NetworkArea area ID as IP address format. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.14 | TableospfMultiProcessIfTable | not-accessible | current | The OSPF Interface Table describes the interfaces from the viewpoint of OSPF. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.14.1 | RowospfMultiProcessIfEntry | not-accessible | current | The OSPF Interface Entry describes one interface from the viewpoint of OSPF. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.14.1.1 | ColumnospfMultiProcessIfIpAddressType | not-accessible | current | The IP address type of this OSPF interface. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.14.1.2 | ColumnospfMultiProcessIfIpAddress | not-accessible | current | The IP address of this OSPF interface. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.14.1.3 | ColumnospfMultiProcessIfCost | read-write | current | The output cost of this OSPF interface. Set 0 means unset the cost, thus the cost is dependent on ospfMultiProcessAutoCost. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.14.1.4 | ColumnospfMultiProcessIfMtu | read-write | current | The mtu of this OSPF interface. Set 0 to unset the mtu. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.14.1.5 | ColumnospfMultiProcessIfMtuIgnore | read-write | current | If check(0), OSPF will check the MTU size during DD (Database Description) exchange. If ignore(1), OSPF will not check the MTU size during DD exchange. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.14.1.6 | ColumnospfMultiProcessIfAreaId | read-only | current | A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone. This is a private substitution f… |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.14.1.7 | ColumnospfMultiProcessIfRtrPriority | read-write | current | The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the r… |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.14.1.8 | ColumnospfMultiProcessIfTransitDelay | read-write | current | The estimated number of seconds it takes to transmit a link state update packet over this interface. Note that the minimal value SHOULD be 1 second. This is a … |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.14.1.9 | ColumnospfMultiProcessIfRetransInterval | read-write | current | The number of seconds between link state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmittin… |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.14.1.10 | ColumnospfMultiProcessIfHelloInterval | read-write | current | The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a com… |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.14.1.11 | ColumnospfMultiProcessIfRtrDeadInterval | read-write | current | The number of seconds that a router's Hello packets have not been seen before its neighbors declare the router down. This should be some multiple of the Hello … |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.14.1.12 | ColumnospfMultiProcessIfState | read-only | current | The OSPF Interface State. This is a private substitution for ospfIfState of RFC1253. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.14.1.13 | ColumnospfMultiProcessIfDesignatedRouter | read-only | current | The IP address of the designated router. This is a private substitution for ospfIfDesignatedRouter of RFC1253. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.14.1.14 | ColumnospfMultiProcessIfBackupDesignatedRouter | read-only | current | The IP address of the backup designated router. This is a private substitution for ospfIfBackupDesignatedRouter of RFC1253. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.14.1.15 | ColumnospfMultiProcessIfEvents | read-only | current | The number of times this OSPF interface has changed its state or an error has occurred. Discontinuities in the value of this counter can occur at re-initializa… |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.14.1.16 | ColumnospfMultiProcessIfAuthKey | read-write | current | The cleartext password used as an OSPF authentication key when simplePassword security is enabled. This object does not access any OSPF cryptogaphic (e.g., MD5… |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.14.1.17 | ColumnospfMultiProcessIfStatus | read-only | current | This variable display the status of the ospf interface. Currently only active and notInService statues are supported. The value of this object has no effect on… |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.14.1.18 | ColumnospfMultiProcessIfAuthType | read-write | current | The authentication type specified for an interface. Note that this object can be used to engage in significant attacks against an OSPF router. This is a privat… |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.14.1.19 | ColumnospfMultiProcessIfDesignatedRouterId | read-only | current | The Router ID of the designated router. This is a private substitution for ospfIfDesignatedRouterId of RFC4750. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.14.1.20 | ColumnospfMultiProcessIfBackupDesignatedRouterId | read-only | current | The Router ID of the backup designated router. This is a private substitution for ospfIfBackupDesignatedRouterId of RFC4750. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.15 | TableospfMultiProcessAreaTable | not-accessible | current | Information describing the configured parameters and cumulative statistics of the router's attached areas. The interfaces and virtual links are configured as p… |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.15.1 | RowospfMultiProcessAreaEntry | not-accessible | current | Information describing the configured parameters and cumulative statistics of one of the router's attached areas. The interfaces and virtual links are configur… |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.15.1.1 | ColumnospfMultiProcessAreaId | not-accessible | current | A 32-bit integer uniquely identifying an area. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.15.1.2 | ColumnospfMultiProcessAuthType | read-create | obsolete | The authentication type specified for an area. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.15.1.3 | ColumnospfMultiProcessImportAsExtern | read-only | current | Indicates if an area is a stub area, NSSA, or standard area. Type-5 AS-external LSAs and type-11 Opaque LSAs are not imported into stub areas or NSSAs. NSSAs i… |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.15.1.4 | ColumnospfMultiProcessSpfRuns | read-only | current | The number of times that the intra-area route table has been calculated using this area's link state database. This is typically done using Dijkstra's algorith… |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.15.1.5 | ColumnospfMultiProcessAreaBdrRtrCount | read-only | current | The total number of Area Border Routers reachable within this area. This is initially zero and is calculated in each Shortest Path First (SPF) pass. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.15.1.6 | ColumnospfMultiProcessAsBdrRtrCount | read-only | current | The total number of Autonomous System Border Routers reachable within this area. This is initially zero and is calculated in each SPF pass. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.15.1.7 | ColumnospfMultiProcessAreaLsaCount | read-only | current | The total number of link state advertisements in this area's link state database, excluding AS-external LSAs. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.15.1.8 | ColumnospfMultiProcessAreaLsaCksumSum | read-only | current | The 32-bit sum of the link state advertisements' LS checksums contained in this area's link state database. This sum excludes external (LS type-5) link state a… |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.15.1.9 | ColumnospfMultiProcessAreaSummary | read-write | current | This variable controls the import of summary LSAs into stub and NSSA areas. It has no effect on other areas. If it is noAreaSummary, the router will not origin… |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.15.1.10 | ColumnospfMultiProcessAreaStatus | read-only | current | Row status of area. Note ospf area can't be created or destroyed solely in this table. Only read is permitted. The value of this object has no effect on whethe… |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.16 | TableospfMultiProcessStubAreaTable | not-accessible | current | The set of metrics that will be advertised by a default Area Border Router into a stub area. This is a private substitution for ospfStubAreaTable of RFC1253. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.16.1 | RowospfMultiProcessStubAreaEntry | not-accessible | current | The metric for a given Type of Service that will be advertised by a default Area Border Router into a stub area. Information in this table is persistent and wh… |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.16.1.1 | ColumnospfMultiProcessStubAreaId | not-accessible | current | The 32-bit identifier for the stub area. On creation, this can be derived from the instance. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.16.1.2 | ColumnospfMultiProcessStubTOS | not-accessible | current | The Type of Service associated with the metric. On creation, this can be derived from the instance. Currently only support TOS=0. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.16.1.3 | ColumnospfMultiProcessStubMetric | read-write | current | The metric value applied at the indicated Type of Service. By default, this equals the least metric at the Type of Service among the interfaces to other areas. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.16.1.4 | ColumnospfMultiProcessStubStatus | read-create | current | This object permits management of the table by facilitating actions such as row creation, construction, and destruction. Currently set only support 'createAndG… |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.17 | TableospfMultiProcessLsdbTable | not-accessible | current | The OSPF Process's link state database (LSDB). The LSDB contains the link state advertisements from throughout the areas that the device is attached to. This i… |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.17.1 | RowospfMultiProcessLsdbEntry | not-accessible | current | A single link state advertisement. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.17.1.1 | ColumnospfMultiProcessLsdbAreaId | not-accessible | current | The 32-bit identifier of the area from which the LSA was received. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.17.1.2 | ColumnospfMultiProcessLsdbType | not-accessible | current | The type of the link state advertisement. Each link state type has a separate advertisement format. Note: External link state advertisements are permitted for … |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.17.1.3 | ColumnospfMultiProcessLsdbLsid | not-accessible | current | The Link State ID is an LS Type Specific field containing either a Router ID or an IP address; It identifies the piece of the routing domain that is being desc… |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.17.1.4 | ColumnospfMultiProcessLsdbRouterId | not-accessible | current | The 32-bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.17.1.5 | ColumnospfMultiProcessLsdbSequence | read-only | current | The sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Thus, a typical … |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.17.1.6 | ColumnospfMultiProcessLsdbAge | read-only | current | This field is the age of the link state advertisement in seconds. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.17.1.7 | ColumnospfMultiProcessLsdbChecksum | read-only | current | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.17.1.8 | ColumnospfMultiProcessLsdbAdvertisement | read-only | current | The entire link state advertisement, including its header. Note that for variable length LSAs, SNMP agents may not be able to return the largest string size. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.20 | TableospfMultiProcessVirtIfTable | not-accessible | current | Information about this router's virtual interfaces that the OSPF Process is configured to carry on. This is a private substitution for ospfVirtIfTable of RFC12… |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.20.1 | RowospfMultiProcessVirtIfEntry | not-accessible | current | Information about a single virtual interface. Information in this table is persistent and when this object is written the entity SHOULD save the change to non-… |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.20.1.1 | ColumnospfMultiProcessVirtIfAreaId | not-accessible | current | The transit area that the virtual link traverses. By definition, this is not 0.0.0.0. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.20.1.2 | ColumnospfMultiProcessVirtIfNeighbor | not-accessible | current | The Router ID of the virtual neighbor. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.20.1.3 | ColumnospfMultiProcessVirtIfTransitDelay | read-write | current | The estimated number of seconds it takes to transmit a Link State update packet over this interface. Note that the minimal value SHOULD be 1 second. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.20.1.4 | ColumnospfMultiProcessVirtIfRetransInterval | read-write | current | The number of seconds between link state avertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting… |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.20.1.5 | ColumnospfMultiProcessVirtIfHelloInterval | read-write | current | The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for the virtual neighbor. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.20.1.6 | ColumnospfMultiProcessVirtIfRtrDeadInterval | read-write | current | The number of seconds that a router's Hello packets have not been seen before its neighbors declare the router down. This should be 4 multiple of the Hello int… |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.20.1.7 | ColumnospfMultiProcessVirtIfState | read-only | current | OSPF virtual interface states. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.20.1.8 | ColumnospfMultiProcessVirtIfEvents | read-only | current | The number of state changes or error events on this virtual link. Discontinuities in the value of this counter can occur at re-initialization of the management… |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.20.1.9 | ColumnospfMultiProcessVirtIfAuthKey | read-write | current | The cleartext password used as an OSPF authentication key when simplePassword security is enabled. This object does not access any OSPF cryptogaphic (e.g., MD5… |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.20.1.10 | ColumnospfMultiProcessVirtIfStatus | read-create | current | This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect… |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.20.1.11 | ColumnospfMultiProcessVirtIfAuthType | read-write | current | The authentication type specified for a virtual interface. Note that this object can be used to engage in significant attacks against an OSPF router. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.21 | TableospfMultiProcessNbrTable | not-accessible | current | A table describing all non-virtual neighbors in the locality of the OSPF router. This is a private substitution for ospfNbrTable of RFC1253. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.21.1 | RowospfMultiProcessNbrEntry | not-accessible | current | The information regarding a single neighbor. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.21.1.1 | ColumnospfMultiProcessNbrIpAddr | not-accessible | current | The IP address this neighbor is using in its IP source address. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.21.1.2 | ColumnospfMultiProcessNbrRtrId | not-accessible | current | A 32-bit integer (represented as a type IpAddress) uniquely identifying the neighboring router in the Autonomous System. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.21.1.3 | ColumnospfMultiProcessNbrOptions | read-only | current | A bit mask corresponding to the neighbor's options field. Bit 0, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If… |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.21.1.4 | ColumnospfMultiProcessNbrPriority | read-only | current | The priority of this neighbor in the designated router election algorithm. The value 0 signifies that the neighbor is not eligible to become the designated rou… |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.21.1.5 | ColumnospfMultiProcessNbrState | read-only | current | The state of the relationship with this neighbor. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.21.1.6 | ColumnospfMultiProcessNbrEvents | read-only | current | The number of times this neighbor relationship has changed state or an error has occurred. Discontinuities in the value of this counter can occur at re-initial… |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.21.1.7 | ColumnospfMultiProcessNbrLsRetransQLen | read-only | current | The current length of the retransmission queue. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.22 | TableospfMultiProcessVirtNbrTable | not-accessible | current | This table describes all virtual neighbors. Since virtual links are configured in the Virtual Interface Table, this table is read-only. This is a private subst… |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.22.1 | RowospfMultiProcessVirtNbrEntry | not-accessible | current | Virtual neighbor information. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.22.1.1 | ColumnospfMultiProcessVirtNbrArea | not-accessible | current | The Transit Area Identifier. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.22.1.2 | ColumnospfMultiProcessVirtNbrRtrId | not-accessible | current | A 32-bit integer uniquely identifying the neighboring router in the Autonomous System. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.22.1.3 | ColumnospfMultiProcessVirtNbrIpAddr | read-only | current | The IP address this virtual neighbor is using. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.22.1.4 | ColumnospfMultiProcessVirtNbrOptions | read-only | current | A bit mask corresponding to the neighbor's options field. Bit 1, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If… |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.22.1.5 | ColumnospfMultiProcessVirtNbrState | read-only | current | The state of the virtual neighbor relationship. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.22.1.6 | ColumnospfMultiProcessVirtNbrEvents | read-only | current | The number of times this virtual link has changed its state or an error has occurred. Discontinuities in the value of this counter can occur at re-initializati… |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.22.1.7 | ColumnospfMultiProcessVirtNbrLsRetransQLen | read-only | current | The current length of the retransmission queue. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.23 | TableospfMultiProcessExtLsdbTable | not-accessible | current | The OSPF Process's external LSA link state database. This table is identical to the OSPF LSDB Table in format, but contains only external link state advertisem… |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.23.1 | RowospfMultiProcessExtLsdbEntry | not-accessible | current | A single link state advertisement. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.23.1.1 | ColumnospfMultiProcessExtLsdbType | not-accessible | current | The type of the link state advertisement. Each link state type has a separate advertisement format. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.23.1.2 | ColumnospfMultiProcessExtLsdbLsid | not-accessible | current | The Link State ID is an LS Type Specific field containing either a Router ID or an IP address; it identifies the piece of the routing domain that is being desc… |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.23.1.3 | ColumnospfMultiProcessExtLsdbRouterId | not-accessible | current | The 32-bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.23.1.4 | ColumnospfMultiProcessExtLsdbSequence | read-only | current | The sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Thus, a typical … |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.23.1.5 | ColumnospfMultiProcessExtLsdbAge | read-only | current | This field is the age of the link state advertisement in seconds. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.23.1.6 | ColumnospfMultiProcessExtLsdbChecksum | read-only | current | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.23.1.7 | ColumnospfMultiProcessExtLsdbAdvertisement | read-only | current | The entire link state advertisement, including its header. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.24 | TableospfMultiProcessAreaAggregateTable | not-accessible | current | The Area Aggregate Table acts as an adjunct to the Area Table. It describes those address aggregates that are configured to be propagated from an area. Its pur… |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.24.1 | RowospfMultiProcessAreaAggregateEntry | not-accessible | current | A single area aggregate entry. Information in this table is persistent and when this object is written the entity SHOULD save the change to non-volatile storag… |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.24.1.1 | ColumnospfMultiProcessAreaAggregateAreaID | not-accessible | current | The area within which the address aggregate is to be found. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.24.1.2 | ColumnospfMultiProcessAreaAggregateLsdbType | not-accessible | current | The type of the address aggregate. This field specifies the Lsdb type that this address aggregate applies to. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.24.1.3 | ColumnospfMultiProcessAreaAggregateNet | not-accessible | current | The IP address of the net or subnet indicated by the range. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.24.1.4 | ColumnospfMultiProcessAreaAggregateMask | not-accessible | current | The subnet mask that pertains to the net or subnet. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.24.1.5 | ColumnospfMultiProcessAreaAggregateStatus | read-create | current | This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect… |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.24.1.6 | ColumnospfMultiProcessAreaAggregateEffect | read-write | current | Subnets subsumed by ranges either trigger the advertisement of the indicated aggregate (advertiseMatching) or result in the subnet's not being advertised at al… |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.27 | TableospfMultiProcessIfAuthMd5Table | not-accessible | current | The OSPF Interface Message Digest Authentication Table describes the interfaces from the viewpoint of OSPF. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.27.1 | RowospfMultiProcessIfAuthMd5Entry | not-accessible | current | The OSPF Interface Message Digest Authentication Entry describes one interface from the viewpoint of OSPF. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.27.1.1 | ColumnospfMultiProcessIfAuthMd5IpAddressType | not-accessible | current | The IP address type of this OSPF interface. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.27.1.2 | ColumnospfMultiProcessIfAuthMd5IpAddress | not-accessible | current | The IP address of this OSPF interface. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.27.1.3 | ColumnospfMultiProcessIfAuthMd5KeyId | not-accessible | current | The Message Digest Authentication key ID of this OSPF interface. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.27.1.4 | ColumnospfMultiProcessIfAuthMd5Key | read-write | current | The Message Digest Authentication key of this OSPF interface. When read, ospfIfAuthMd5Key always returns an octet string of length zero. Set zero-length string… |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.28 | TableospfMultiProcessVirtIfAuthMd5Table | not-accessible | current | The OSPF Virtual Interface Message Digest Authentication Table describes the interfaces from the viewpoint of OSPF. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.28.1 | RowospfMultiProcessVirtIfAuthMd5Entry | not-accessible | current | The OSPF Virtual Interface Message Digest Authentication Entry describes one interface from the viewpoint of OSPF. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.28.1.1 | ColumnospfMultiProcessVirtIfAuthMd5AreaId | not-accessible | current | The transit area that the virtual link traverses. By definition, this is not 0.0.0.0. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.28.1.2 | ColumnospfMultiProcessVirtIfAuthMd5Neighbor | not-accessible | current | The Router ID of the virtual neighbor. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.28.1.3 | ColumnospfMultiProcessVirtIfAuthMd5KeyId | not-accessible | current | The Message Digest Authentication key ID of this OSPF virtual interface. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.28.1.4 | ColumnospfMultiProcessVirtIfAuthMd5Key | read-write | current | The Message Digest Authentication key of this OSPF virtual interface. When read, ospfVirtIfAuthMd5Key always returns an octet string of length zero. Set zero-l… |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.31 | TableospfMultiProcessRouteTable | not-accessible | current | A conceptual table for ospfRouteEntry. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.31.1 | RowospfMultiProcessRouteEntry | not-accessible | current | A conceptually row for ospfRouteTable. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.31.1.1 | ColumnospfMultiProcessRouteDest | not-accessible | current | The destination IP address of this route. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.31.1.2 | ColumnospfMultiProcessRoutePfxLen | not-accessible | current | The prefix length of this route. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.31.1.3 | ColumnospfMultiProcessRouteNexthop | not-accessible | current | The nexthop IP address of this route. Note that, discard and directly connected routes have no nexthops. They are displayed as 0.0.0.0. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.31.1.4 | ColumnospfMultiProcessRouteInterface | read-only | current | The name of outgoing interface which links to nexthop. Return an octet string of length zero when it is discard route. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.31.1.5 | ColumnospfMultiProcessRouteCost | read-only | current | The cost of this route. Always return 4294967295 if it is a discard route. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.31.1.6 | ColumnospfMultiProcessRoutePathType | read-only | current | The path type of this route. unknown, unknown path type. connected, directly connected. discard, discard route. intra, intra-area route. inter, inter-area rout… |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.31.1.7 | ColumnospfMultiProcessRouteAreaId | read-only | current | Area ID of the path which links to nexthop. Note that, discard and external routes have no area option for the path. Always return 0.0.0.0. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.31.1.8 | ColumnospfMultiProcessRouteTransitArea | read-only | current | To display if the area is a transit area or not for the path. Note that, discard and external routes have no area option for the path. Always return normalArea… |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.37 | TableospfIfParamTable | not-accessible | current | The TOS metrics for a non-virtual interface identified by the interface index. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.37.1 | RowospfIfParamEntry | not-accessible | current | A particular TOS metric for a non-virtual in- terface identified by the interface index. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.37.1.1 | ColumnospfIfParamIfindex | not-accessible | current | The Ifindex of this OSPF interface. On row creation, this can be derived from the instance. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.37.1.2 | ColumnospfIfParamIpAddress | not-accessible | current | The IP address of this OSPF interface. On row creation, this can be derived from the in- stance. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.37.1.3 | ColumnospfIfParamTOS | not-accessible | current | The type of service metric being referenced. On row creation, this can be derived from the instance. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.37.1.4 | ColumnospfIfParamCost | read-write | current | The metric of using this type of service on this interface. The default value of the TOS 0 Metric is 10^8 / ifSpeed. |
| 1.3.6.1.4.1.259.10.1.5.1.18.3.37.1.5 | ColumnospfIfParamStatus | read-create | current | Writing this to valid(1) creates an entry. Writing this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.259.10.1.5.1.18.5 | NoderouteMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.18.5.3 | ScalarrouteMultipath | read-write | current | This object is the multipath numbers installed to FIB. The default value is 4. |
| 1.3.6.1.4.1.259.10.1.5.1.19 | NodesysLogMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.19.1 | ScalarsysLogStatus | read-write | current | Whether the system log is enabled. |
| 1.3.6.1.4.1.259.10.1.5.1.19.2 | ScalarsysLogHistoryFlashLevel | read-write | current | Severity level for logging to flash. |
| 1.3.6.1.4.1.259.10.1.5.1.19.3 | ScalarsysLogHistoryRamLevel | read-write | current | Severity level for logging to RAM. |
| 1.3.6.1.4.1.259.10.1.5.1.19.6 | NoderemoteLogMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.19.6.1 | ScalarremoteLogStatus | read-write | current | Whether the remote log system is enabled. |
| 1.3.6.1.4.1.259.10.1.5.1.19.6.2 | ScalarremoteLogLevel | read-write | current | Severity level for remote log. |
| 1.3.6.1.4.1.259.10.1.5.1.19.6.3 | ScalarremoteLogFacilityType | read-write | current | The facility type for remote log. |
| 1.3.6.1.4.1.259.10.1.5.1.19.6.7 | TableremoteLogServerInetTable | not-accessible | current | A table for storing the remote log server list. |
| 1.3.6.1.4.1.259.10.1.5.1.19.6.7.1 | RowremoteLogServerInetEntry | not-accessible | current | A conceptual row for remoteLogServerInetTable. |
| 1.3.6.1.4.1.259.10.1.5.1.19.6.7.1.1 | ColumnremoteLogServerInetAddressType | not-accessible | current | Indicates the type of address denoted in remoteLogServerInetAddress type. Only ipv4(1), ipv6(2) and ipv6z(4) types are supported. |
| 1.3.6.1.4.1.259.10.1.5.1.19.6.7.1.2 | ColumnremoteLogServerInetAddress | not-accessible | current | The IP address of the remote log Server. |
| 1.3.6.1.4.1.259.10.1.5.1.19.6.7.1.3 | ColumnremoteLogServerStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.259.10.1.5.1.19.7 | NodesmtpMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.19.7.1 | ScalarsmtpStatus | read-write | current | Set enabled(1) to enable the SMTP, set disabled(2) to disable the SMTP. |
| 1.3.6.1.4.1.259.10.1.5.1.19.7.2 | ScalarsmtpSeverityLevel | read-write | current | Specify the SMTP minimum severity level to send the event message. |
| 1.3.6.1.4.1.259.10.1.5.1.19.7.3 | ScalarsmtpSourceEMail | read-write | current | SMTP source email address, the sender's mail address that appears in the 'From' field of the mail. |
| 1.3.6.1.4.1.259.10.1.5.1.19.7.4 | TablesmtpServerIpTable | not-accessible | current | The SMTP server IP table. The maximum servers to be added is 3. |
| 1.3.6.1.4.1.259.10.1.5.1.19.7.4.1 | RowsmtpServerIpEntry | not-accessible | current | A conceptual row of the smtpServerIpTable. |
| 1.3.6.1.4.1.259.10.1.5.1.19.7.4.1.1 | ColumnsmtpServerIp | accessible-for-notify | current | SMTP mail server's IP address. |
| 1.3.6.1.4.1.259.10.1.5.1.19.7.4.1.2 | ColumnsmtpServerIpStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.259.10.1.5.1.19.7.5 | TablesmtpDestEMailTable | not-accessible | current | The table of the destination e-mail address. The maximum numbers of destination email address to be added is 5. |
| 1.3.6.1.4.1.259.10.1.5.1.19.7.5.1 | RowsmtpDestEMailEntry | not-accessible | current | A conceptual row of the smtpDestEMailTable. |
| 1.3.6.1.4.1.259.10.1.5.1.19.7.5.1.1 | ColumnsmtpDestEMail | not-accessible | current | SMTP destination e-mail address. |
| 1.3.6.1.4.1.259.10.1.5.1.19.7.5.1.2 | ColumnsmtpDestEMailStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.259.10.1.5.1.20 | NodelineMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.20.1 | NodeconsoleMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.20.1.1 | ScalarconsoleDataBits | read-write | current | Number of data bits. |
| 1.3.6.1.4.1.259.10.1.5.1.20.1.2 | ScalarconsoleParity | read-write | current | Defines the generation of a parity bit. |
| 1.3.6.1.4.1.259.10.1.5.1.20.1.3 | ScalarconsoleBaudRate | read-write | current | Baud rate: Valid values are 115200, 57600, 38400, 19200, and 9600. |
| 1.3.6.1.4.1.259.10.1.5.1.20.1.4 | ScalarconsoleStopBits | read-write | current | The console stop bits, valid values are stopbits1(1) or stopbits2(2) |
| 1.3.6.1.4.1.259.10.1.5.1.20.1.5 | ScalarconsoleExecTimeout | read-write | current | In a serial console, use the consoleExecTimeout variable to set the interval that the EXEC command interpreter waits until user input is detected; set the valu… |
| 1.3.6.1.4.1.259.10.1.5.1.20.1.6 | ScalarconsolePasswordThreshold | read-write | current | The number of failed console logon attempts that may be made before the system will not accept a further attempt in the time specified by consoleSilentTime. A … |
| 1.3.6.1.4.1.259.10.1.5.1.20.1.7 | ScalarconsoleSilentTime | read-write | current | The length of time that the management console is inaccessible after the number of failed logon attempts has reached consolePasswordThreshold. A value of 0 dis… |
| 1.3.6.1.4.1.259.10.1.5.1.20.1.10 | ScalarconsoleLoginResponseTimeout | read-write | current | Console login response timeout setting. Valid range is 0 to 300. Setting to 0 means disabled. |
| 1.3.6.1.4.1.259.10.1.5.1.20.2 | NodetelnetMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.20.2.4 | ScalartelnetStatus | read-write | current | To enable or disable the telnet function. Any new telnet request will be rejected and all current telnet sessions will be terminated if this status is set to d… |
| 1.3.6.1.4.1.259.10.1.5.1.20.2.5 | ScalartelnetPortNumber | read-write | current | The telnet session port number. |
| 1.3.6.1.4.1.259.10.1.5.1.20.3 | NodevtyMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.20.3.1 | ScalarvtyExecTimeout | read-write | current | Specifies the interval that the system waits for user input before terminating the current session. |
| 1.3.6.1.4.1.259.10.1.5.1.20.3.2 | ScalarvtyPasswordThreshold | read-write | current | The number of failed logon attempts that may be made before the system will not accept a further attempt to log on. |
| 1.3.6.1.4.1.259.10.1.5.1.20.3.3 | ScalarvtyLoginResponseTimeout | read-write | current | Login response timeout setting. Setting to 0 means disabled. |
| 1.3.6.1.4.1.259.10.1.5.1.20.3.4 | ScalarvtyMaxSession | read-write | current | The maximum number of allowed sessions. |
| 1.3.6.1.4.1.259.10.1.5.1.20.3.5 | ScalarvtySilentTime | read-write | current | The time the system waits before etablishing a new session after the number of failed logins reaches the specified limit. |
| 1.3.6.1.4.1.259.10.1.5.1.23 | NodesysTimeMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.23.1 | NodesntpMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.23.1.1 | ScalarsntpStatus | read-write | current | Set enabled(1) to enable the SNTP, set disabled(2) to disable the SNTP. |
| 1.3.6.1.4.1.259.10.1.5.1.23.1.2 | ScalarsntpServiceMode | read-only | current | Service mode. |
| 1.3.6.1.4.1.259.10.1.5.1.23.1.3 | ScalarsntpPollInterval | read-write | current | Polling interval. |
| 1.3.6.1.4.1.259.10.1.5.1.23.1.4 | TablesntpServerTable | not-accessible | current | Table for SNTP servers. IP addresses must occupy contiguous indexes, starting from 1. If a removed entry is not the last entry, the table will be shifted to co… |
| 1.3.6.1.4.1.259.10.1.5.1.23.1.4.1 | RowsntpServerEntry | not-accessible | current | Entry for SNTP servers. |
| 1.3.6.1.4.1.259.10.1.5.1.23.1.4.1.1 | ColumnsntpServerIndex | not-accessible | current | The index of a server. |
| 1.3.6.1.4.1.259.10.1.5.1.23.1.4.1.4 | ColumnsntpServerInetAddressType | read-write | current | Indicates the type of address denoted in sntpServerInetAddress type. Only ipv4(1), ipv6(2) and ipv6z(4) types are supported. |
| 1.3.6.1.4.1.259.10.1.5.1.23.1.4.1.5 | ColumnsntpServerInetAddress | read-write | current | The IP address of a time server. |
| 1.3.6.1.4.1.259.10.1.5.1.23.1.4.1.6 | ColumnsntpServerStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.259.10.1.5.1.23.2 | ScalarsysCurrentTime | read-write | current | This is a text string in the following form, based on Unix: 'Mmm _d hh:mm:ss yyyy'. 'Mmm' are the first three letters of the English name of the month. '_d' is… |
| 1.3.6.1.4.1.259.10.1.5.1.23.3 | ScalarsysTimeZone | read-write | current | This is a text string in the following form: '[s]hh:mm'. '[s]' is a plus-or-minus sign. For UTC, this is omitted. For a positive offset, this is '+'. For a neg… |
| 1.3.6.1.4.1.259.10.1.5.1.23.4 | ScalarsysTimeZoneName | read-write | current | The name of the time zone. |
| 1.3.6.1.4.1.259.10.1.5.1.24 | NodefileMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.24.1 | NodefileCopyMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.24.1.1 | ScalarfileCopySrcOperType | read-write | current | |
| 1.3.6.1.4.1.259.10.1.5.1.24.1.2 | ScalarfileCopySrcFileName | read-write | current | The source file name for fileCopyMgt when a copy operation is next requested via this MIB. This value is set to a zero length string when no file name has been… |
| 1.3.6.1.4.1.259.10.1.5.1.24.1.3 | ScalarfileCopyDestOperType | read-write | current | See the description for fileCopySrcOperType. |
| 1.3.6.1.4.1.259.10.1.5.1.24.1.4 | ScalarfileCopyDestFileName | read-write | current | The destination file name for fileCopyMgt when a copy operation is next requested via this MIB. This value is set to a zero length string when no file name has… |
| 1.3.6.1.4.1.259.10.1.5.1.24.1.5 | ScalarfileCopyFileType | read-write | current | Type of file to copy in fileCopyMgt. opcode(1) indicates operation code, config(2) indicates configuration file. |
| 1.3.6.1.4.1.259.10.1.5.1.24.1.7 | ScalarfileCopyUnitId | read-write | current | Specifies the switch unit for stackable devices. |
| 1.3.6.1.4.1.259.10.1.5.1.24.1.8 | ScalarfileCopyAction | read-write | current | Set this object to copy(2) to begin the copy operation. When the device is not copying, this object will have a value of notCopying(1). Setting this object to … |
| 1.3.6.1.4.1.259.10.1.5.1.24.1.9 | ScalarfileCopyStatus | read-only | current | The status of the last copy procedure, if any. This object will have a value of fileCopyUnknown(18) if no copy operation has been performed. |
| 1.3.6.1.4.1.259.10.1.5.1.24.1.20 | ScalarfileCopyServerInetAddressType | read-write | current | Internet address type of the remote server. Only ipv4(1) type is supported. |
| 1.3.6.1.4.1.259.10.1.5.1.24.1.21 | ScalarfileCopyServerInetAddress | read-write | current | Internet address of the remote server. |
| 1.3.6.1.4.1.259.10.1.5.1.24.1.22 | ScalarfileCopyServerUserName | read-write | current | Login user name for the remote server. When this variable is empty, the system will use 'anonymous' as user name to log in to the remote server. |
| 1.3.6.1.4.1.259.10.1.5.1.24.1.23 | ScalarfileCopyServerPassword | read-write | current | Login password for the remote server. This variable can only be written. When this variable is read, it always returns a zero-length string. |
| 1.3.6.1.4.1.259.10.1.5.1.24.2 | NodefileInfoMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.24.2.1 | TablefileInfoTable | not-accessible | current | This table contain the information of the file system; we can also perform the delete, set startup file operation. |
| 1.3.6.1.4.1.259.10.1.5.1.24.2.1.1 | RowfileInfoEntry | not-accessible | current | A conceptually row for fileInfoTable. |
| 1.3.6.1.4.1.259.10.1.5.1.24.2.1.1.1 | ColumnfileInfoUnitID | not-accessible | current | The switch unit in a stacking system, in a non-stacking system, this value is always 1. |
| 1.3.6.1.4.1.259.10.1.5.1.24.2.1.1.2 | ColumnfileInfoFileName | not-accessible | current | The file Name of the file System in the device. |
| 1.3.6.1.4.1.259.10.1.5.1.24.2.1.1.3 | ColumnfileInfoFileType | read-only | current | The file type of the file System in the device. |
| 1.3.6.1.4.1.259.10.1.5.1.24.2.1.1.4 | ColumnfileInfoIsStartUp | read-write | current | This flag indicate whether this file is a startup file. Set this object to true(1) to indicate that this is a startup file. Setting this object to false(2) is … |
| 1.3.6.1.4.1.259.10.1.5.1.24.2.1.1.5 | ColumnfileInfoFileSize | read-only | current | The sizes( in bytes) of the file. |
| 1.3.6.1.4.1.259.10.1.5.1.24.2.1.1.6 | ColumnfileInfoCreationTime | read-only | current | The creation time of the file, This is a text string in the following form, based on Unix: 'Mmm _d hh:mm:ss yyyy'. 'Mmm' are the first three letters of the Eng… |
| 1.3.6.1.4.1.259.10.1.5.1.24.2.1.1.7 | ColumnfileInfoDelete | read-write | current | Write this object to delete(2) to delete a file, when read, this always return noDelete(1). |
| 1.3.6.1.4.1.259.10.1.5.1.24.3 | TablefileAutoDownloadResultTable | not-accessible | current | This table contains file auto download result information. |
| 1.3.6.1.4.1.259.10.1.5.1.24.3.1 | RowfileAutoDownloadResultEntry | not-accessible | current | A conceptual row for fileAutoDownloadResultTable. |
| 1.3.6.1.4.1.259.10.1.5.1.24.3.1.1 | ColumnfileAutoDownloadResultUnitID | not-accessible | current | The switch unit in a stacking system, in a non-stacking system, this value is always 1. |
| 1.3.6.1.4.1.259.10.1.5.1.24.3.1.2 | ColumnfileAutoDownloadResultAction | read-only | current | The status of the auto download action. value copying(2) will be obtained if the auto download action is currently processing, or value notCopying(1) will be o… |
| 1.3.6.1.4.1.259.10.1.5.1.24.3.1.3 | ColumnfileAutoDownloadResultStatus | read-only | current | The last auto download result status. value fileCopyUnknown(18) will be obtained if no download action has been performed before. |
| 1.3.6.1.4.1.259.10.1.5.1.26 | NodednsMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.26.1 | ScalardnsDomainLookup | read-write | current | To enable the IP Domain Naming System (DNS)-based host name-to-address translation. |
| 1.3.6.1.4.1.259.10.1.5.1.26.2 | ScalardnsDomainName | read-write | current | To define a default domain name to complete unqualified host names (names without a dotted-decimal domain name). |
| 1.3.6.1.4.1.259.10.1.5.1.26.7 | TablednsCacheTable | not-accessible | current | To display the RRs in DNS cache. |
| 1.3.6.1.4.1.259.10.1.5.1.26.7.1 | RowdnsCacheEntry | not-accessible | current | A conceptual row for the dnsCacheTable. |
| 1.3.6.1.4.1.259.10.1.5.1.26.7.1.1 | ColumndnsCacheIndex | not-accessible | current | The entry sequence number. |
| 1.3.6.1.4.1.259.10.1.5.1.26.7.1.2 | ColumndnsCacheFlag | read-only | current | Always get 4, means this record is unreliable. |
| 1.3.6.1.4.1.259.10.1.5.1.26.7.1.3 | ColumndnsCacheType | read-only | current | Cache Type: address(1); cname(2). |
| 1.3.6.1.4.1.259.10.1.5.1.26.7.1.5 | ColumndnsCacheTtl | read-only | current | The DNS cache TTL. |
| 1.3.6.1.4.1.259.10.1.5.1.26.7.1.6 | ColumndnsCacheDomain | read-only | current | The DNS cache domain. |
| 1.3.6.1.4.1.259.10.1.5.1.26.7.1.7 | ColumndnsCacheInetAddressType | read-only | current | Indicates the type of address denoted in dnsHostAddrInetAddress type. Only ipv4(1) and ipv6(2) types are supported. |
| 1.3.6.1.4.1.259.10.1.5.1.26.7.1.8 | ColumndnsCacheInetAddress | read-only | current | IP address of DNS cache item. |
| 1.3.6.1.4.1.259.10.1.5.1.26.8 | TablednsHostTable | not-accessible | current | The conceptual table of dnsHostEntry. The dnsHostTable and dnsHostAddrTable are used to define static host name-to-address mapping. |
| 1.3.6.1.4.1.259.10.1.5.1.26.8.1 | RowdnsHostEntry | not-accessible | current | A conceptual row for the dnsHostTable. |
| 1.3.6.1.4.1.259.10.1.5.1.26.8.1.1 | ColumndnsHostIndex | not-accessible | current | The entry sequence number. |
| 1.3.6.1.4.1.259.10.1.5.1.26.8.1.2 | ColumndnsHostName | read-create | current | Host name. |
| 1.3.6.1.4.1.259.10.1.5.1.26.8.1.3 | ColumndnsHostStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.259.10.1.5.1.26.9 | TablednsHostAddrTable | not-accessible | current | The conceptual table of dnsHostAddrEntry. The dnsHostTable and dnsHostAddrTable are used to define static host name-to-address mapping. |
| 1.3.6.1.4.1.259.10.1.5.1.26.9.1 | RowdnsHostAddrEntry | not-accessible | current | A conceptual row for the dnsHostAddrTable. |
| 1.3.6.1.4.1.259.10.1.5.1.26.9.1.1 | ColumndnsHostAddrInetAddressType | not-accessible | current | Indicates the type of address denoted in dnsHostAddrInetAddress type. Only ipv4(1), ipv6(2) and ipv6z(4) type are supported. |
| 1.3.6.1.4.1.259.10.1.5.1.26.9.1.2 | ColumndnsHostAddrInetAddress | not-accessible | current | Specifies the address of the host. Adding one address to two different hosts is not allowed. |
| 1.3.6.1.4.1.259.10.1.5.1.26.9.1.3 | ColumndnsHostAddrStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.259.10.1.5.1.26.10 | TablednsDomainListTable | not-accessible | current | This table defines a list of default domain names to complete unqualified host names. |
| 1.3.6.1.4.1.259.10.1.5.1.26.10.1 | RowdnsDomainListEntry | not-accessible | current | A conceptual row for the dnsDomainListTable. |
| 1.3.6.1.4.1.259.10.1.5.1.26.10.1.1 | ColumndnsDomainListIndex | not-accessible | current | The entry sequence number. |
| 1.3.6.1.4.1.259.10.1.5.1.26.10.1.2 | ColumndnsDomainListName | read-create | current | Domain name. |
| 1.3.6.1.4.1.259.10.1.5.1.26.10.1.3 | ColumndnsDomainListStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.259.10.1.5.1.26.11 | TablednsNameServerInetTable | not-accessible | current | Specifies the address of one or more name servers to use for name and address resolution. |
| 1.3.6.1.4.1.259.10.1.5.1.26.11.1 | RowdnsNameServerInetEntry | not-accessible | current | A conceptual row for dnsNameServerInetTable. |
| 1.3.6.1.4.1.259.10.1.5.1.26.11.1.1 | ColumndnsNameServerInetAddressType | not-accessible | current | Type of address. Only ipv4(1), ipv6(2) and ipv6z(4) types are supported. |
| 1.3.6.1.4.1.259.10.1.5.1.26.11.1.2 | ColumndnsNameServerInetAddress | not-accessible | current | IP address of name server. |
| 1.3.6.1.4.1.259.10.1.5.1.26.11.1.3 | ColumndnsNameServerInetStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.259.10.1.5.1.33 | NodestormMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.33.1 | NodemcastStormMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.33.1.1 | TablemcastStormTable | not-accessible | current | Table to manage the control of multicast storms for ports. |
| 1.3.6.1.4.1.259.10.1.5.1.33.1.1.1 | RowmcastStormEntry | not-accessible | current | The conceptual row of multiStormTable. |
| 1.3.6.1.4.1.259.10.1.5.1.33.1.1.1.1 | ColumnmcastStormIfIndex | not-accessible | current | The port and the trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface… |
| 1.3.6.1.4.1.259.10.1.5.1.33.1.1.1.2 | ColumnmcastStormStatus | read-write | current | Whether multicast storm protection is enabled. |
| 1.3.6.1.4.1.259.10.1.5.1.33.1.1.1.4 | ColumnmcastStormPktRate | read-write | current | Multicast storm threshold as packets per second. If this entry is for a trunk, this is the value for each member port. The range is 500 to 262143. |
| 1.3.6.1.4.1.259.10.1.5.1.33.3 | NodebcastStormMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.33.3.1 | TablebcastStormTable | not-accessible | current | Table to manage the control of broadcast storms for ports. |
| 1.3.6.1.4.1.259.10.1.5.1.33.3.1.1 | RowbcastStormEntry | not-accessible | current | The conceptual row of bcastStormTable. |
| 1.3.6.1.4.1.259.10.1.5.1.33.3.1.1.1 | ColumnbcastStormIfIndex | not-accessible | current | The port and the trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface… |
| 1.3.6.1.4.1.259.10.1.5.1.33.3.1.1.2 | ColumnbcastStormStatus | read-write | current | Whether broadcast storm protection is enabled. |
| 1.3.6.1.4.1.259.10.1.5.1.33.3.1.1.4 | ColumnbcastStormPktRate | read-write | current | Broadcast storm threshold as packets per second. If this entry is for a trunk, this is the value for each member port. The range is 500 to 262143. |
| 1.3.6.1.4.1.259.10.1.5.1.33.4 | NodeunknownUcastStormMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.33.4.1 | TableunknownUcastStormTable | not-accessible | current | Table to manage the unknown unicast storm control. |
| 1.3.6.1.4.1.259.10.1.5.1.33.4.1.1 | RowunknownUcastStormEntry | not-accessible | current | The conceptual row of unknownUcastStormTable. |
| 1.3.6.1.4.1.259.10.1.5.1.33.4.1.1.1 | ColumnunknownUcastStormIfIndex | not-accessible | current | The port or trunk interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same valu… |
| 1.3.6.1.4.1.259.10.1.5.1.33.4.1.1.2 | ColumnunknownUcastStormStatus | read-write | current | The parameter indicates that the unknown unicast storm protection is enabled/disabled. |
| 1.3.6.1.4.1.259.10.1.5.1.33.4.1.1.4 | ColumnunknownUcastStormPktRate | read-write | current | The parameter indicates the packet rate(packet per second) of the storm protection. The range is 500 to 262143. |
| 1.3.6.1.4.1.259.10.1.5.1.33.5 | NodeatcMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.33.5.1 | ScalaratcBcastStormTcApplyTime | read-write | current | The parameter indicates the timing when the ATC (Auto Traffic Control) is activated after the broadcast traffic being detected as the storm. |
| 1.3.6.1.4.1.259.10.1.5.1.33.5.2 | ScalaratcBcastStormTcReleaseTime | read-write | current | The parameter indicates the timing when the ATC is released after the broadcast traffic being detected as no storm. |
| 1.3.6.1.4.1.259.10.1.5.1.33.5.3 | TableatcBcastStormTable | not-accessible | current | The table contains the Auto Traffic Control configuration and the status for broadcast traffic. |
| 1.3.6.1.4.1.259.10.1.5.1.33.5.3.1 | RowatcBcastStormEntry | not-accessible | current | The conceptual row of the table. |
| 1.3.6.1.4.1.259.10.1.5.1.33.5.3.1.1 | ColumnatcBcastStormIfIndex | accessible-for-notify | current | The specified port on which the ATC is applied. |
| 1.3.6.1.4.1.259.10.1.5.1.33.5.3.1.2 | ColumnatcBcastStormEnable | read-write | current | The parameter indicates whether the ATC of the broadcast traffic is applied. |
| 1.3.6.1.4.1.259.10.1.5.1.33.5.3.1.3 | ColumnatcBcastStormAutoRelease | read-write | current | The parameter indicates whether the Auto-Release feature of ATC is applied. |
| 1.3.6.1.4.1.259.10.1.5.1.33.5.3.1.4 | ColumnatcBcastStormSampleType | read-write | current | The parameter indicates the unit of traffic rate and threshold. |
| 1.3.6.1.4.1.259.10.1.5.1.33.5.3.1.5 | ColumnatcBcastStormCurrentTrafficRate | read-only | current | The parameter indicates the current broadcast traffic rate. |
| 1.3.6.1.4.1.259.10.1.5.1.33.5.3.1.6 | ColumnatcBcastStormAlarmFireThreshold | read-write | current | The parameter indicates that if the current broadcast traffic rate exceeds the specified threshold, it will be treated as the storm. |
| 1.3.6.1.4.1.259.10.1.5.1.33.5.3.1.7 | ColumnatcBcastStormAlarmClearThreshold | read-write | current | The parameter indicates that if the current broadcast traffic falls below the specified threshold it will be treated as the normal traffic. |
| 1.3.6.1.4.1.259.10.1.5.1.33.5.3.1.8 | ColumnatcBcastStormTcAction | read-write | current | The parameter indicates the protecting action which ATC will applied to the specified port. |
| 1.3.6.1.4.1.259.10.1.5.1.33.5.3.1.9 | ColumnatcBcastStormAlarmFireTrapStatus | read-write | current | The parameter indicates whether the trap has to be sent when the broadcast storm has been detected. |
| 1.3.6.1.4.1.259.10.1.5.1.33.5.3.1.10 | ColumnatcBcastStormAlarmClearTrapStatus | read-write | current | The parameter indicates whether the trap has to be sent when the broadcast storm has been detected as the normal traffic. |
| 1.3.6.1.4.1.259.10.1.5.1.33.5.3.1.11 | ColumnatcBcastStormTcApplyTrapStatus | read-write | current | The parameter indicates whether the trap has to be sent when the ATC is activated. |
| 1.3.6.1.4.1.259.10.1.5.1.33.5.3.1.12 | ColumnatcBcastStormTcReleaseTrapStatus | read-write | current | The parameter indicates whether the trap has to be sent when the ATC is released. |
| 1.3.6.1.4.1.259.10.1.5.1.33.5.4 | ScalaratcMcastStormTcApplyTime | read-write | current | The parameter indicates the timing when the ATC (Auto Traffic Control) is activated after the broadcast traffic being detected as the storm. |
| 1.3.6.1.4.1.259.10.1.5.1.33.5.5 | ScalaratcMcastStormTcReleaseTime | read-write | current | The parameter indicates the timing when the ATC is released after the broadcast traffic being detected as no storm. |
| 1.3.6.1.4.1.259.10.1.5.1.33.5.6 | TableatcMcastStormTable | not-accessible | current | The table contains the Auto Traffic Control configuration and the status for mulicast traffic. |
| 1.3.6.1.4.1.259.10.1.5.1.33.5.6.1 | RowatcMcastStormEntry | not-accessible | current | The conceptual row of the table. |
| 1.3.6.1.4.1.259.10.1.5.1.33.5.6.1.1 | ColumnatcMcastStormIfIndex | accessible-for-notify | current | The specified port on which the ATC is applied. |
| 1.3.6.1.4.1.259.10.1.5.1.33.5.6.1.2 | ColumnatcMcastStormEnable | read-write | current | The parameter indicates whether the ATC of the mulicast traffic is applied. |
| 1.3.6.1.4.1.259.10.1.5.1.33.5.6.1.3 | ColumnatcMcastStormAutoRelease | read-write | current | The parameter indicates whether the Auto-Release feature of ATC is applied. |
| 1.3.6.1.4.1.259.10.1.5.1.33.5.6.1.4 | ColumnatcMcastStormSampleType | read-write | current | The parameter indicates the unit of traffic rate and threshold. |
| 1.3.6.1.4.1.259.10.1.5.1.33.5.6.1.5 | ColumnatcMcastStormCurrentTrafficRate | read-only | current | The parameter indicates the current mulicast traffic rate. |
| 1.3.6.1.4.1.259.10.1.5.1.33.5.6.1.6 | ColumnatcMcastStormAlarmFireThreshold | read-write | current | The parameter indicates that if the current mulicast traffic rate exceeds the specified threshold, it will be treated as the storm. |
| 1.3.6.1.4.1.259.10.1.5.1.33.5.6.1.7 | ColumnatcMcastStormAlarmClearThreshold | read-write | current | The parameter indicates that if the current mulicast traffic falls below the specified threshold it will be treated as the normal traffic. |
| 1.3.6.1.4.1.259.10.1.5.1.33.5.6.1.8 | ColumnatcMcastStormTcAction | read-write | current | The parameter indicates the protecting action which ATC will applied to the specified port. |
| 1.3.6.1.4.1.259.10.1.5.1.33.5.6.1.9 | ColumnatcMcastStormAlarmFireTrapStatus | read-write | current | The parameter indicates whether the trap has to be sent when the mulicast storm has been detected. |
| 1.3.6.1.4.1.259.10.1.5.1.33.5.6.1.10 | ColumnatcMcastStormAlarmClearTrapStatus | read-write | current | The parameter indicates whether the trap has to be sent when the mulicast storm has been detected as the normal traffic. |
| 1.3.6.1.4.1.259.10.1.5.1.33.5.6.1.11 | ColumnatcMcastStormTcApplyTrapStatus | read-write | current | The parameter indicates whether the trap has to be sent when the ATC is activated. |
| 1.3.6.1.4.1.259.10.1.5.1.33.5.6.1.12 | ColumnatcMcastStormTcReleaseTrapStatus | read-write | current | The parameter indicates whether the trap has to be sent when the ATC is released. |
| 1.3.6.1.4.1.259.10.1.5.1.39 | NodesysResourceMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.39.2 | NodecpuStatus | |||
| 1.3.6.1.4.1.259.10.1.5.1.39.2.1 | ScalarcpuCurrentUti | read-only | current | The current CPU utilization in percent in the past 5 seconds. |
| 1.3.6.1.4.1.259.10.1.5.1.39.2.2 | ScalarcpuStatMaxUti | read-only | current | The maximum CPU utilization in percent in the past 60 seconds. |
| 1.3.6.1.4.1.259.10.1.5.1.39.2.3 | ScalarcpuStatAvgUti | read-only | current | The average CPU utilization in percent in the past 60 seconds. |
| 1.3.6.1.4.1.259.10.1.5.1.39.2.4 | ScalarcpuPeakTime | read-only | current | The time when the CPU utilization reaches cpuUtiRisingThreshold in the format of 'Mmm _d hh:mm:ss yyyy' as defined in sysCurrentTime of this MIB. |
| 1.3.6.1.4.1.259.10.1.5.1.39.2.5 | ScalarcpuPeakDuration | read-only | current | The duration from the CPU utilization reaches cpuUtiRisingThreshold to reaches cpuUtiFallingThreshold, in seconds. |
| 1.3.6.1.4.1.259.10.1.5.1.39.2.6 | ScalarcpuUtiRisingThreshold | read-write | current | The rising threshold of the cpu utilization. |
| 1.3.6.1.4.1.259.10.1.5.1.39.2.7 | ScalarcpuUtiFallingThreshold | read-write | current | The falling threshold of the cpu utilization. |
| 1.3.6.1.4.1.259.10.1.5.1.39.3 | NodememoryStatus | |||
| 1.3.6.1.4.1.259.10.1.5.1.39.3.1 | ScalarmemoryTotal | read-only | current | The total amount of the memory in kilobytes. |
| 1.3.6.1.4.1.259.10.1.5.1.39.3.2 | ScalarmemoryAllocated | read-only | current | The amount of the memory allocated in kilobytes. |
| 1.3.6.1.4.1.259.10.1.5.1.39.3.3 | ScalarmemoryFreed | read-only | current | The amount of the free memory in kilobytes. |
| 1.3.6.1.4.1.259.10.1.5.1.39.3.4 | ScalarmemoryFreedInPercent | read-only | current | the memory freed in proportion to the total memory. |
| 1.3.6.1.4.1.259.10.1.5.1.39.3.5 | ScalarmemoryUtiRisingThreshold | read-write | current | The rising threshold of the memory utilization. |
| 1.3.6.1.4.1.259.10.1.5.1.39.3.6 | ScalarmemoryUtiFallingThreshold | read-write | current | The falling threshold of the memory utilization. |
| 1.3.6.1.4.1.259.10.1.5.1.44 | NodemvrMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.44.20 | TablemvrDomainTable | not-accessible | current | The table for configuring the MVR port. |
| 1.3.6.1.4.1.259.10.1.5.1.44.20.1 | RowmvrDomainEntry | not-accessible | current | The entry for configuring the MVR Domain. |
| 1.3.6.1.4.1.259.10.1.5.1.44.20.1.1 | ColumnmvrDomainId | not-accessible | current | Speicfies which MVR domain to configure. |
| 1.3.6.1.4.1.259.10.1.5.1.44.20.1.2 | ColumnmvrDomainStatus | read-write | current | Parameter to enable or disable MVR(Multicast VLAN Registration) on the device. |
| 1.3.6.1.4.1.259.10.1.5.1.44.20.1.3 | ColumnmvrDomainRunningStatus | read-only | current | Describes the running status of MVR (Multicast VLAN Registration) to the switch. A value of active(1) indicates that all necessary conditions in the MVR enviro… |
| 1.3.6.1.4.1.259.10.1.5.1.44.20.1.4 | ColumnmvrDomainVlanId | read-write | current | To set VLAN for MVR.The VLAN identified by a particular value of this index is the same VLAN as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-… |
| 1.3.6.1.4.1.259.10.1.5.1.44.20.1.5 | ColumnmvrDomainUpstreamSourceIp | read-write | current | Set the source IP address which MVR will carry in IP header when send IGMP packet to upstream router through MVR source port. |
| 1.3.6.1.4.1.259.10.1.5.1.44.21 | TablemvrDomainPortTable | not-accessible | current | The table for configuring the MVR port. |
| 1.3.6.1.4.1.259.10.1.5.1.44.21.1 | RowmvrDomainPortEntry | not-accessible | current | The entry for configuring the MVR port. |
| 1.3.6.1.4.1.259.10.1.5.1.44.21.1.1 | ColumnmvrPortDomainId | not-accessible | current | Speicfies which MVR domain to configure. |
| 1.3.6.1.4.1.259.10.1.5.1.44.21.1.2 | ColumnmvrDomainIfIndex | not-accessible | current | The port interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIn… |
| 1.3.6.1.4.1.259.10.1.5.1.44.21.1.3 | ColumnmvrDomainPortType | read-write | current | For configuring the MVR port type. To disable the MVR port type, use the none(0). |
| 1.3.6.1.4.1.259.10.1.5.1.44.21.1.4 | ColumnmvrDomainPortImmediateLeave | read-write | current | To enable immediate leave on MVR port. |
| 1.3.6.1.4.1.259.10.1.5.1.44.21.1.5 | ColumnmvrDomainPortActive | read-only | current | To indicate if the port is associated with the MVR group. If the port is the MVR receiver port or the MVR source port in MVR vlan, the status is active(1); oth… |
| 1.3.6.1.4.1.259.10.1.5.1.44.22 | NodemvrProfileTable | |||
| 1.3.6.1.4.1.259.10.1.5.1.44.22.1 | TablemvrProfileCtlTable | not-accessible | current | The entry for configuring the MVR profile. |
| 1.3.6.1.4.1.259.10.1.5.1.44.22.1.1 | RowmvrProfileCtlEntry | not-accessible | current | The entry for configuring the MVR profile. |
| 1.3.6.1.4.1.259.10.1.5.1.44.22.1.1.1 | ColumnmvrProfileCtlId | not-accessible | current | Profile ID to index which MVR profile |
| 1.3.6.1.4.1.259.10.1.5.1.44.22.1.1.2 | ColumnmvrProfileName | read-write | current | MVR Profile name which identify a group range. NOTE: All mvrProfileCtlEntry use the same buffer to temply store the mvrProfileName before mvrProfileCtlAction r… |
| 1.3.6.1.4.1.259.10.1.5.1.44.22.1.1.5 | ColumnmvrProfileCtlAction | read-write | current | Set this object to create(2) to create profile. Set this object to destory(3) to delete profile. When the action is complete, this object becomes noAction(1). |
| 1.3.6.1.4.1.259.10.1.5.1.44.22.2 | TablemvrProfileGroupCtlTable | not-accessible | current | The entry for configuring the MVR group ranges for MVR profile. |
| 1.3.6.1.4.1.259.10.1.5.1.44.22.2.1 | RowmvrProfileGroupCtlEntry | not-accessible | current | The entry for configuring the group ranges on MVR profile. |
| 1.3.6.1.4.1.259.10.1.5.1.44.22.2.1.1 | ColumnmvrProfileGropuCtlProfileId | not-accessible | current | Profile ID to index which MVR profile |
| 1.3.6.1.4.1.259.10.1.5.1.44.22.2.1.2 | ColumnmvrProfileGroupCtlId | not-accessible | current | Profile ID to index which group range in MVR profile |
| 1.3.6.1.4.1.259.10.1.5.1.44.22.2.1.3 | ColumnmvrProfileGroupStartIPAddress | read-write | current | MVR Profile range start IP address. NOTE: All mvrProfileGroupCtlEntry use the same buffer to temply store the mvrProfileStartIPAddress before mvrProfileGroupCt… |
| 1.3.6.1.4.1.259.10.1.5.1.44.22.2.1.4 | ColumnmvrProfileGroupEndIPAddress | read-write | current | MVR Profile range end IP address. NOTE: All mvrProfileGroupCtlEntry use the same buffer to temply store the mvrProfileEndIPAddress before mvrProfileGroupCtlAct… |
| 1.3.6.1.4.1.259.10.1.5.1.44.22.2.1.5 | ColumnmvrProfileGroupCtlAction | read-write | current | Set this object to create(2) to create group range. Set this object to destory(3) to delete group range. When the action is complete, this object becomes noAct… |
| 1.3.6.1.4.1.259.10.1.5.1.44.23 | TablemvrDomainAssociatedProfileTable | not-accessible | current | Configure MVR domain associate which MVR profile |
| 1.3.6.1.4.1.259.10.1.5.1.44.23.1 | RowmvrDomainAssociatedProfileEntry | not-accessible | current | The entry for configuring MVR domain associate MVR profile. |
| 1.3.6.1.4.1.259.10.1.5.1.44.23.1.1 | ColumnmvrProfileDomainId | not-accessible | current | Profile ID to index which MVR profile |
| 1.3.6.1.4.1.259.10.1.5.1.44.23.1.2 | ColumnmvrProfileId | not-accessible | current | Profile ID to index which MVR profile |
| 1.3.6.1.4.1.259.10.1.5.1.44.23.1.3 | ColumnmvrProfileAction | read-write | current | Set this object to create(2) to associate profile. Set this object to destory(3) to deassociate profile. When the action is complete, this object becomes noAct… |
| 1.3.6.1.4.1.259.10.1.5.1.44.24 | TablemvrDomainGroupStaticTable | not-accessible | current | The table for configuring the static members of the MVR group. |
| 1.3.6.1.4.1.259.10.1.5.1.44.24.1 | RowmvrDomainGroupStaticEntry | not-accessible | current | The entry for configuring the static members of the MVR group. |
| 1.3.6.1.4.1.259.10.1.5.1.44.24.1.1 | ColumnmvrGroupStaticDomainId | not-accessible | current | Profile ID to index which MVR profile |
| 1.3.6.1.4.1.259.10.1.5.1.44.24.1.2 | ColumnmvrDomainGroupStaticAddress | not-accessible | current | The multicast address of the MVR group. |
| 1.3.6.1.4.1.259.10.1.5.1.44.24.1.3 | ColumnmvrDomainGroupStaticReceiverVlan | not-accessible | current | The receiver vlan of this MVR group |
| 1.3.6.1.4.1.259.10.1.5.1.44.24.1.4 | ColumnmvrDomainGroupStaticPorts | read-write | current | The set of ports configured by management in this entry. Ports entered in this list will be the static members of this MVR group. |
| 1.3.6.1.4.1.259.10.1.5.1.44.25 | TablemvrDomainGroupCurrentTable | not-accessible | current | The table for the current members of the MVR group. |
| 1.3.6.1.4.1.259.10.1.5.1.44.25.1 | RowmvrDomainGroupCurrentEntry | not-accessible | current | The entry for the current members of the MVR group. |
| 1.3.6.1.4.1.259.10.1.5.1.44.25.1.1 | ColumnmvrGroupCurrenDomainId | not-accessible | current | Profile ID to index which MVR profile |
| 1.3.6.1.4.1.259.10.1.5.1.44.25.1.2 | ColumnmvrDomainGroupCurrentAddress | not-accessible | current | The multicast address of the MVR group. |
| 1.3.6.1.4.1.259.10.1.5.1.44.25.1.3 | ColumnmvrDomainGroupCurrentReceiverVlan | not-accessible | current | This object indicates the receiver VLAN of the MVR group. |
| 1.3.6.1.4.1.259.10.1.5.1.44.25.1.4 | ColumnmvrDomainGroupCurrentPorts | read-only | current | The complete set of ports currently associated with this MVR group. |
| 1.3.6.1.4.1.259.10.1.5.1.46 | NodedhcpSnoopMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.46.1 | NodedhcpSnoopGlobal | |||
| 1.3.6.1.4.1.259.10.1.5.1.46.1.1 | ScalardhcpSnoopEnable | read-write | current | This object indicates whether the DHCP Snooping feature is enabled. |
| 1.3.6.1.4.1.259.10.1.5.1.46.1.2 | ScalardhcpSnoopVerifyMacAddressEnable | read-write | current | This object indicates whether DHCP Snooping Mac address verification is enabled. |
| 1.3.6.1.4.1.259.10.1.5.1.46.1.3 | ScalardhcpSnoopInformationOptionEnable | read-write | current | This object indicates whether the DHCP snooping information option(option 82) feature is enabled. |
| 1.3.6.1.4.1.259.10.1.5.1.46.1.4 | ScalardhcpSnoopInformationOptionPolicy | read-write | current | This object indicates which reforwarding policy shall be used for DHCP snooping information option(option 82). A value of drop(1) means to drop the DHCP reques… |
| 1.3.6.1.4.1.259.10.1.5.1.46.1.5 | ScalardhcpSnoopBindingsTableCtlAction | read-write | current | Set this to store(2) to store DHCP snooping binding entries to flash. Set this to clear(3) to clear DHCP snooping binding entries from flash. noAction(1) will … |
| 1.3.6.1.4.1.259.10.1.5.1.46.2 | NodedhcpSnoopVlan | |||
| 1.3.6.1.4.1.259.10.1.5.1.46.2.1 | TabledhcpSnoopVlanConfigTable | not-accessible | current | A table contains DHCP Snooping configurations of existing VLANs. |
| 1.3.6.1.4.1.259.10.1.5.1.46.2.1.1 | RowdhcpSnoopVlanConfigEntry | not-accessible | current | An instance contains the configuration to enable or disable DHCP Snooping at each existing VLAN. |
| 1.3.6.1.4.1.259.10.1.5.1.46.2.1.1.1 | ColumndhcpSnoopVlanIndex | not-accessible | current | This object indicates the VLAN ID on which DHCP Snooping feature is configured. |
| 1.3.6.1.4.1.259.10.1.5.1.46.2.1.1.2 | ColumndhcpSnoopVlanEnable | read-write | current | This object indicates whether DHCP Snooping is enabled in this VLAN. |
| 1.3.6.1.4.1.259.10.1.5.1.46.3 | NodedhcpSnoopInterface | |||
| 1.3.6.1.4.1.259.10.1.5.1.46.3.1 | TabledhcpSnoopPortConfigTable | not-accessible | current | A table provides the mechanism to configure the trust state of each port or trunk for DHCP Snooping purpose. |
| 1.3.6.1.4.1.259.10.1.5.1.46.3.1.1 | RowdhcpSnoopPortConfigEntry | not-accessible | current | An instance contains the configuration to enable or disable trust state of each port or trunk for DHCP Snooping purpose. |
| 1.3.6.1.4.1.259.10.1.5.1.46.3.1.1.1 | ColumndhcpSnoopPortIfIndex | not-accessible | current | The ifIndex value of the port or trunk. |
| 1.3.6.1.4.1.259.10.1.5.1.46.3.1.1.2 | ColumndhcpSnoopPortTrustEnable | read-write | current | This object indicates whether the port or trunk is trusted for DHCP Snooping purpose. |
| 1.3.6.1.4.1.259.10.1.5.1.46.4 | NodedhcpSnoopBindings | |||
| 1.3.6.1.4.1.259.10.1.5.1.46.4.1 | TabledhcpSnoopBindingsTable | not-accessible | current | A table contains the DHCP bindings information learnt by the device. |
| 1.3.6.1.4.1.259.10.1.5.1.46.4.1.1 | RowdhcpSnoopBindingsEntry | not-accessible | current | An instance contains the Mac address, IP address type, IP address, VLAN number, interface number, leased time and status. |
| 1.3.6.1.4.1.259.10.1.5.1.46.4.1.1.1 | ColumndhcpSnoopBindingsVlanIndex | not-accessible | current | This object indicates the VLAN which a DHCP client host belongs to. |
| 1.3.6.1.4.1.259.10.1.5.1.46.4.1.1.2 | ColumndhcpSnoopBindingsMacAddress | not-accessible | current | This object indicates the MAC address of a DHCP client host. |
| 1.3.6.1.4.1.259.10.1.5.1.46.4.1.1.3 | ColumndhcpSnoopBindingsAddrType | read-only | current | This object indicates the type of IP address denoted in dhcpSnoopBindingsIpAddress type. |
| 1.3.6.1.4.1.259.10.1.5.1.46.4.1.1.4 | ColumndhcpSnoopBindingsEntryType | read-only | current | This object indicates that this binding is obtained from dynamically learning or is a static configuraion. |
| 1.3.6.1.4.1.259.10.1.5.1.46.4.1.1.5 | ColumndhcpSnoopBindingsIpAddress | read-only | current | This object indicates the allocated IP address of a DHCP client host. |
| 1.3.6.1.4.1.259.10.1.5.1.46.4.1.1.6 | ColumndhcpSnoopBindingsPortIfIndex | read-only | current | This object indicates the port or trunk where a DHCP client host connects to. |
| 1.3.6.1.4.1.259.10.1.5.1.46.4.1.1.7 | ColumndhcpSnoopBindingsLeaseTime | read-only | current | This object indicates the leased time of this DHCP bindings. |
| 1.3.6.1.4.1.259.10.1.5.1.46.5 | NodedhcpSnoopStatistics | |||
| 1.3.6.1.4.1.259.10.1.5.1.46.5.1 | ScalardhcpSnoopTotalForwardedPkts | read-only | current | Indicates the total number of packets subjected to DHCP Snooping is forwarded. |
| 1.3.6.1.4.1.259.10.1.5.1.46.5.3 | ScalardhcpSnoopUntrustedPortDroppedPkts | read-only | current | Indicates the number of packets subjected to DHCP Snooping is dropped because they come from untrusted interface. |
| 1.3.6.1.4.1.259.10.1.5.1.47 | NodeclusterMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.47.1 | ScalarclusterEnable | read-write | current | Enables or disables clustering on the device. |
| 1.3.6.1.4.1.259.10.1.5.1.47.2 | ScalarclusterCommanderEnable | read-write | current | Enables or disables the device as commander in a cluster. |
| 1.3.6.1.4.1.259.10.1.5.1.47.4 | ScalarclusterIpPool | read-write | current | The start internal IP address of a cluster pool. |
| 1.3.6.1.4.1.259.10.1.5.1.47.5 | ScalarclusterClearCandidateTable | read-write | current | Setting this object to clear(2) starts to clear the candidate table. |
| 1.3.6.1.4.1.259.10.1.5.1.47.6 | ScalarclusterRole | read-only | current | The current role of the device in a cluster. commander(1) : The switch is the controlling device in a cluster. candidate(2) : The switch has been discovered by… |
| 1.3.6.1.4.1.259.10.1.5.1.47.7 | ScalarclusterMemberCount | read-only | current | The total number of members in a cluster. |
| 1.3.6.1.4.1.259.10.1.5.1.47.8 | ScalarclusterCandidateCount | read-only | current | The total number of candidates in a cluster. |
| 1.3.6.1.4.1.259.10.1.5.1.47.9 | TableclusterCandidateTable | not-accessible | current | A table listing cluster candidates. |
| 1.3.6.1.4.1.259.10.1.5.1.47.9.1 | RowclusterCandidateEntry | not-accessible | current | A conceptual row containing the information of the candidate. |
| 1.3.6.1.4.1.259.10.1.5.1.47.9.1.1 | ColumnclusterCandidateMacAddr | not-accessible | current | The MAC address of the candidate. |
| 1.3.6.1.4.1.259.10.1.5.1.47.9.1.3 | ColumnclusterCandidateDesc | read-only | current | The description of the candidate. |
| 1.3.6.1.4.1.259.10.1.5.1.47.9.1.4 | ColumnclusterCandidateRole | read-only | current | The role of the candidate. candidate(2) : The switch is discovered by the commander, but it has not been manually configured for access from the commander. act… |
| 1.3.6.1.4.1.259.10.1.5.1.47.10 | TableclusterMemberTable | not-accessible | current | A table listing clustering members. |
| 1.3.6.1.4.1.259.10.1.5.1.47.10.1 | RowclusterMemberEntry | not-accessible | current | A conceptual row containing the information of the member. |
| 1.3.6.1.4.1.259.10.1.5.1.47.10.1.1 | ColumnclusterMemberId | not-accessible | current | The ID of the member. |
| 1.3.6.1.4.1.259.10.1.5.1.47.10.1.2 | ColumnclusterMemberMacAddr | read-only | current | The MAC address of the member. |
| 1.3.6.1.4.1.259.10.1.5.1.47.10.1.3 | ColumnclusterMemberDesc | read-only | current | The description of the member. |
| 1.3.6.1.4.1.259.10.1.5.1.47.10.1.4 | ColumnclusterMemberActive | read-only | current | The active status of the member. activeMember(3) : The switch is manually configured for access from the commander and it is active in the cluster. inactiveMem… |
| 1.3.6.1.4.1.259.10.1.5.1.47.11 | NodeclusterMemberAddCtl | |||
| 1.3.6.1.4.1.259.10.1.5.1.47.11.1 | ScalarclusterMemberAddCtlMacAddr | read-write | current | The MAC address of the device associated with clusterMemberAddCtlAction. |
| 1.3.6.1.4.1.259.10.1.5.1.47.11.2 | ScalarclusterMemberAddCtlId | read-write | current | The member id associated with clusterMemberAddCtlAction. |
| 1.3.6.1.4.1.259.10.1.5.1.47.11.5 | ScalarclusterMemberAddCtlAction | read-write | current | Adds the device to members that can be accessed from the commander. The MAC of the device is the current value of clusterMemberAddCtlMacAddr and the assigned m… |
| 1.3.6.1.4.1.259.10.1.5.1.47.12 | NodeclusterMemberRemoveCtl | |||
| 1.3.6.1.4.1.259.10.1.5.1.47.12.1 | ScalarclusterMemberRemoveCtlId | read-write | current | The member ID associated with clusterMemberRemoveCtlAction. |
| 1.3.6.1.4.1.259.10.1.5.1.47.12.2 | ScalarclusterMemberRemoveCtlAction | read-write | current | Removes the device from members that can be accessed from the commander. The member ID is the current value of clusterMemberRemoveCtlId. Set this object to rem… |
| 1.3.6.1.4.1.259.10.1.5.1.48 | NodeipSrcGuardMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.48.1 | TableipSrcGuardConfigTable | not-accessible | current | A table contains the configurations to enable or disable IP Source Guard at each port or trunk. |
| 1.3.6.1.4.1.259.10.1.5.1.48.1.1 | RowipSrcGuardConfigEntry | not-accessible | current | An instance contains the configuration to enable or disable IP Source Guard at each port or trunk. |
| 1.3.6.1.4.1.259.10.1.5.1.48.1.1.1 | ColumnipSrcGuardPortIfIndex | not-accessible | current | This object idents the port or trunk which is capable of IP Source Guard feature. |
| 1.3.6.1.4.1.259.10.1.5.1.48.1.1.2 | ColumnipSrcGuardMode | read-write | current | This object indicates whether Ip Source Guard is enabled at this interface. If the value equals 0, it means Ip Source Guard is disabled. If the value equals 1,… |
| 1.3.6.1.4.1.259.10.1.5.1.48.2 | TableipSrcGuardAddrTable | not-accessible | current | A table contains the IP Source Guard bindings information learnt by the device. |
| 1.3.6.1.4.1.259.10.1.5.1.48.2.1 | RowipSrcGuardAddrEntry | not-accessible | current | An instance contains the Mac address, IP address type, IP address, VLAN number, interface number, leased time and status. |
| 1.3.6.1.4.1.259.10.1.5.1.48.2.1.1 | ColumnipSrcGuardBindingsVlanIndex | not-accessible | current | This object indicates the VLAN which a DHCP client host belongs to. |
| 1.3.6.1.4.1.259.10.1.5.1.48.2.1.2 | ColumnipSrcGuardBindingsMacAddress | not-accessible | current | This object indicates the MAC address of a DHCP client host. |
| 1.3.6.1.4.1.259.10.1.5.1.48.2.1.3 | ColumnipSrcGuardBindingsAddrType | read-create | current | This object indicates the type of IP address denoted in ipSrcGuardBindingsIpAddress type. |
| 1.3.6.1.4.1.259.10.1.5.1.48.2.1.4 | ColumnipSrcGuardBindingsEntryType | read-only | current | This object indicates that this binding is obtained from dynamically learning or is a static configuraion. |
| 1.3.6.1.4.1.259.10.1.5.1.48.2.1.5 | ColumnipSrcGuardBindingsIpAddress | read-create | current | This object indicates the allocated IP address of a DHCP client host. |
| 1.3.6.1.4.1.259.10.1.5.1.48.2.1.6 | ColumnipSrcGuardBindingsPortIfIndex | read-create | current | This object indicates the port or trunk where a DHCP client host connects to. |
| 1.3.6.1.4.1.259.10.1.5.1.48.2.1.7 | ColumnipSrcGuardBindingsLeaseTime | read-only | current | This object indicates the leased time of this DHCP bindings. |
| 1.3.6.1.4.1.259.10.1.5.1.48.2.1.8 | ColumnipSrcGuardBindingsStatus | read-create | current | The status of this conceptual row entry. This object issued to manage the creation and deletion of conceptual rows. The status column has six defined values: -… |
| 1.3.6.1.4.1.259.10.1.5.1.52 | NodeoamMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.52.3 | TableoamPortClearStatTable | not-accessible | current | A table contains the information of clear OAM statistics at each port. |
| 1.3.6.1.4.1.259.10.1.5.1.52.3.1 | RowoamPortClearStatEntry | not-accessible | current | An entry contains the information of clear OAM statistics at each port. |
| 1.3.6.1.4.1.259.10.1.5.1.52.3.1.1 | ColumnoamPortClearStatIndex | not-accessible | current | This object shows the ifIndex value of the port excluding trunk. |
| 1.3.6.1.4.1.259.10.1.5.1.52.3.1.2 | ColumnoamClearStatistics | read-write | current | This variable is used to clear the counters for OAM. Set this variable to clear(2) to perform the clear operation, noClear(1) will always be displayed when rea… |
| 1.3.6.1.4.1.259.10.1.5.1.54 | NodemldSnoopMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.54.1 | ScalarmldSnoopStatus | read-write | current | Parameter to enable or disable MLD snooping on the device. When enabled, the device will examine MLD packets and set up filters for MLD ports. |
| 1.3.6.1.4.1.259.10.1.5.1.54.2 | ScalarmldSnoopQuerier | read-write | current | Enables (disables) whether the switch acts as an MLD querier. |
| 1.3.6.1.4.1.259.10.1.5.1.54.3 | ScalarmldSnoopRobustness | read-write | current | The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness Variable may be increased. … |
| 1.3.6.1.4.1.259.10.1.5.1.54.4 | ScalarmldSnoopQueryInterval | read-write | current | The interval (in seconds) between MLD host-query messages sent by the switch. |
| 1.3.6.1.4.1.259.10.1.5.1.54.5 | ScalarmldSnoopQueryMaxResponseTime | read-write | current | The time after a query, during which a response is expected from an endstation. If a querier has sent a number of queries defined by mldSnoopRobustness, but an… |
| 1.3.6.1.4.1.259.10.1.5.1.54.6 | ScalarmldSnoopRouterPortExpireTime | read-write | current | Sets the time (in seconds) the switch waits after the previous querier has stopped querying before the router port (which received query packets from previous … |
| 1.3.6.1.4.1.259.10.1.5.1.54.7 | ScalarmldSnoopVersion | read-write | current | MLD version snooped |
| 1.3.6.1.4.1.259.10.1.5.1.54.8 | ScalarmldSnoopUnknownMcastMode | read-write | current | Sets the mldSnoopUnknownMcastMode to define the flooding behavior when receive the unknown multicast traffic. |
| 1.3.6.1.4.1.259.10.1.5.1.54.9 | TablemldSnoopRouterCurrentTable | not-accessible | current | Table for current router ports. |
| 1.3.6.1.4.1.259.10.1.5.1.54.9.1 | RowmldSnoopRouterCurrentEntry | not-accessible | current | Entry for current router ports. |
| 1.3.6.1.4.1.259.10.1.5.1.54.9.1.1 | ColumnmldSnoopRouterCurrentVlanIndex | not-accessible | current | The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The e… |
| 1.3.6.1.4.1.259.10.1.5.1.54.9.1.2 | ColumnmldSnoopRouterCurrentPorts | read-only | current | The set of ports which are current router ports, including static router ports. Please refer to mldSnoopRouterStaticTable. |
| 1.3.6.1.4.1.259.10.1.5.1.54.10 | TablemldSnoopRouterStaticTable | not-accessible | current | Table for static router ports. |
| 1.3.6.1.4.1.259.10.1.5.1.54.10.1 | RowmldSnoopRouterStaticEntry | not-accessible | current | Entry for static router ports. |
| 1.3.6.1.4.1.259.10.1.5.1.54.10.1.1 | ColumnmldSnoopRouterStaticVlanIndex | not-accessible | current | The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The e… |
| 1.3.6.1.4.1.259.10.1.5.1.54.10.1.2 | ColumnmldSnoopRouterStaticPorts | read-create | current | The set of ports which are static router ports. |
| 1.3.6.1.4.1.259.10.1.5.1.54.11 | TablemldSnoopMulticastCurrentTable | not-accessible | current | Table for current multicast addresses. |
| 1.3.6.1.4.1.259.10.1.5.1.54.11.1 | RowmldSnoopMulticastCurrentEntry | not-accessible | current | Entry for current multicast addresses. |
| 1.3.6.1.4.1.259.10.1.5.1.54.11.1.1 | ColumnmldSnoopMulticastCurrentVlanIndex | not-accessible | current | The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The e… |
| 1.3.6.1.4.1.259.10.1.5.1.54.11.1.2 | ColumnmldSnoopMulticastCurrentIpAddress | not-accessible | current | IPv6 address of multicast group. |
| 1.3.6.1.4.1.259.10.1.5.1.54.11.1.3 | ColumnmldSnoopMulticastCurrentPorts | read-only | current | The set of ports which are members of a multicast group, including static members. Please refer to mldSnoopMulticastStaticTable. |
| 1.3.6.1.4.1.259.10.1.5.1.54.12 | TablemldSnoopMulticastStaticTable | not-accessible | current | Table for static multicast addresses. |
| 1.3.6.1.4.1.259.10.1.5.1.54.12.1 | RowmldSnoopMulticastStaticEntry | not-accessible | current | Entry for static multicast addresses. |
| 1.3.6.1.4.1.259.10.1.5.1.54.12.1.1 | ColumnmldSnoopMulticastStaticVlanIndex | not-accessible | current | The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The e… |
| 1.3.6.1.4.1.259.10.1.5.1.54.12.1.2 | ColumnmldSnoopMulticastStaticIpAddress | not-accessible | current | IPv6 address of multicast group. |
| 1.3.6.1.4.1.259.10.1.5.1.54.12.1.3 | ColumnmldSnoopMulticastStaticPorts | read-create | current | The set of ports which are members. |
| 1.3.6.1.4.1.259.10.1.5.1.54.13 | TablemldSnoopCurrentVlanTable | not-accessible | current | Table for configuring MLD snooping for each VLAN which exists in the device by (local or network) management, or dynamically created as a result of GVRP reques… |
| 1.3.6.1.4.1.259.10.1.5.1.54.13.1 | RowmldSnoopCurrentVlanEntry | not-accessible | current | Entry for configuring MLD snooping. |
| 1.3.6.1.4.1.259.10.1.5.1.54.13.1.1 | ColumnmldSnoopCurrentVlanIndex | not-accessible | current | Same is dot1qVlanIndex in the Q-BRIDGE-MIB. This table has only one entry - the entry for the VLAN of the management interface. |
| 1.3.6.1.4.1.259.10.1.5.1.54.13.1.2 | ColumnmldSnoopCurrentVlanImmediateLeave | read-write | current | The parameter to enable or disable the Immediate-Leave feature on this VLAN. |
| 1.3.6.1.4.1.259.10.1.5.1.55 | NodesFlowMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.55.2 | TablesFlowPortTable | not-accessible | current | A table that contains the settings of sFlow. |
| 1.3.6.1.4.1.259.10.1.5.1.55.2.1 | RowsFlowPortEntry | not-accessible | current | The conceptual row of sFlowPortTable. |
| 1.3.6.1.4.1.259.10.1.5.1.55.2.1.1 | ColumnsFlowPortIndex | not-accessible | current | The port number of a port. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the… |
| 1.3.6.1.4.1.259.10.1.5.1.55.2.1.2 | ColumnsFlowPortStatus | read-create | current | Set this to enabled(1) to enable sFlow on this port, and set this to disabled(2) to disable sFlow on this port. |
| 1.3.6.1.4.1.259.10.1.5.1.56 | NodedynamicArpInspectionMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.56.1 | NodedaiGlobal | |||
| 1.3.6.1.4.1.259.10.1.5.1.56.1.1 | ScalardaiGlobalStatus | read-write | current | Set enabled(1) to enable dynamic ARP inspection. Set disabled(2) to disable dynamic ARP inspection. |
| 1.3.6.1.4.1.259.10.1.5.1.56.1.2 | ScalardaiGlobalSrcMacValidation | read-write | current | Set enabled(1) to enable validation of source MAC address. Set disabled(2) to disable validation of source MAC address. |
| 1.3.6.1.4.1.259.10.1.5.1.56.1.3 | ScalardaiGlobalDestMacValidation | read-write | current | Set enabled(1) to enable validation of destination MAC address. Set disabled(2) to disable validation of destination MAC address. |
| 1.3.6.1.4.1.259.10.1.5.1.56.1.4 | ScalardaiGlobalIpAddrValidation | read-write | current | Set enabled(1) to enable validation of IP address. Set disabled(2) to disable validation of IP address. |
| 1.3.6.1.4.1.259.10.1.5.1.56.1.5 | ScalardaiGlobalLogNumber | read-write | current | The number of log buffers for saving log message. The value 0 means not generating system messages. |
| 1.3.6.1.4.1.259.10.1.5.1.56.1.6 | ScalardaiGlobalLogInterval | read-write | current | The value of the time interval for saving log messages. |
| 1.3.6.1.4.1.259.10.1.5.1.56.1.7 | ScalardaiGlobalAdditionalValidStatus | read-only | current | The vaule of this object is disabled(2) when the status of daiGlobalSrcMacValidation, daiGlobalDestMacValidation, and daiGlobalIpAddrValidation are disabled; e… |
| 1.3.6.1.4.1.259.10.1.5.1.56.2 | NodedaiVlan | |||
| 1.3.6.1.4.1.259.10.1.5.1.56.2.1 | TabledaiVlanTable | not-accessible | current | A table contains dynamic ARP inspection configurations for existing VLANs. |
| 1.3.6.1.4.1.259.10.1.5.1.56.2.1.1 | RowdaiVlanEntry | not-accessible | current | An instance containing the configuration of dynamic ARP inspection for each existing VLAN. |
| 1.3.6.1.4.1.259.10.1.5.1.56.2.1.1.1 | ColumndaiVlanIndex | not-accessible | current | This object indicates the VLAN ID on which dynamic ARP inspection is configured. |
| 1.3.6.1.4.1.259.10.1.5.1.56.2.1.1.2 | ColumndaiVlanStatus | read-write | current | This object indicates whether dynamic ARP inspection is enabled in this VLAN. |
| 1.3.6.1.4.1.259.10.1.5.1.56.2.1.1.3 | ColumndaiVlanArpAclName | read-write | current | Specifies the ARP ACL name bound to the interface. The default value of daiVlanArpAclStatus is dynamic(2). |
| 1.3.6.1.4.1.259.10.1.5.1.56.2.1.1.4 | ColumndaiVlanArpAclStatus | read-write | current | Set to static(1) means packets not matching the ACL are dropped. Set to dynamic(2) means packets not matching the ACL are validated by the DHCP snooping bindin… |
| 1.3.6.1.4.1.259.10.1.5.1.56.3 | NodedaiInterface | |||
| 1.3.6.1.4.1.259.10.1.5.1.56.3.1 | TabledaiPortTable | not-accessible | current | A table containing dynamic ARP inspection configurations for port interfaces. |
| 1.3.6.1.4.1.259.10.1.5.1.56.3.1.1 | RowdaiPortEntry | not-accessible | current | An instance containing the configuration of dynamic ARP inspection at each port interface. |
| 1.3.6.1.4.1.259.10.1.5.1.56.3.1.1.1 | ColumndaiPortIfIndex | not-accessible | current | The ifIndex value of the port. |
| 1.3.6.1.4.1.259.10.1.5.1.56.3.1.1.2 | ColumndaiPortTrustStatus | read-write | current | This object indicates whether the port is trusted for dynamic ARP inspection. |
| 1.3.6.1.4.1.259.10.1.5.1.56.3.1.1.3 | ColumndaiPortRateLimit | read-write | current | The value of rate limit threshold per second of disposing ARP messages. Set the value 0xFFFFFFFF as no rate limit. |
| 1.3.6.1.4.1.259.10.1.5.1.56.4 | NodedaiLog | |||
| 1.3.6.1.4.1.259.10.1.5.1.56.4.1 | TabledaiLogTable | not-accessible | current | A table containing dynamic ARP inspection log information. |
| 1.3.6.1.4.1.259.10.1.5.1.56.4.1.1 | RowdaiLogEntry | not-accessible | current | An instance containing log information of dynamic ARP inspection at each VLAN interface. |
| 1.3.6.1.4.1.259.10.1.5.1.56.4.1.1.1 | ColumndaiLogIndex | not-accessible | current | This object indicates the index of dynamic ARP inspection log information. |
| 1.3.6.1.4.1.259.10.1.5.1.56.4.1.1.2 | ColumndaiLogVlan | read-only | current | This object indicates the VLAN ID of dynamic ARP inspection log information. |
| 1.3.6.1.4.1.259.10.1.5.1.56.4.1.1.3 | ColumndaiLogPort | read-only | current | This object indicates the ifIndex of dynamic ARP inspection log information. |
| 1.3.6.1.4.1.259.10.1.5.1.56.4.1.1.4 | ColumndaiLogSrcIpAddress | read-only | current | The source IP address of dynamic ARP inspection log information. |
| 1.3.6.1.4.1.259.10.1.5.1.56.4.1.1.5 | ColumndaiLogDestIpAddress | read-only | current | The destination IP address of dynamic ARP inspection log information. |
| 1.3.6.1.4.1.259.10.1.5.1.56.4.1.1.6 | ColumndaiLogSrcMacAddress | read-only | current | The source MAC address of dynamic ARP inspection log information. |
| 1.3.6.1.4.1.259.10.1.5.1.56.4.1.1.7 | ColumndaiLogDestMacAddress | read-only | current | The destination MAC address of dynamic ARP inspection log information. |
| 1.3.6.1.4.1.259.10.1.5.1.56.5 | NodedaiStatistics | |||
| 1.3.6.1.4.1.259.10.1.5.1.56.5.1 | ScalardaiTotalReceivedPkts | read-only | current | Indicates the total number of ARP packets received before rate limiting. |
| 1.3.6.1.4.1.259.10.1.5.1.56.5.2 | ScalardaiTotalDroppedPkts | read-only | current | Indicates the total number of ARP packets dropped due to rate limt. |
| 1.3.6.1.4.1.259.10.1.5.1.56.5.3 | ScalardaiTotalProcessedPkts | read-only | current | Indicates the total number of ARP packets processed by ARP inspection. |
| 1.3.6.1.4.1.259.10.1.5.1.56.5.4 | ScalardaiTotalSrcMacDroppedPkts | read-only | current | Indicates the total number of ARP packets dropped by source MAC address validation. |
| 1.3.6.1.4.1.259.10.1.5.1.56.5.5 | ScalardaiTotalDestMacDroppedPkts | read-only | current | Indicates the total number of ARP packets dropped by destination MAC address validation. |
| 1.3.6.1.4.1.259.10.1.5.1.56.5.6 | ScalardaiTotalIpAddrDroppedPkts | read-only | current | Indicates the total number of ARP packets dropped by IP address validation. |
| 1.3.6.1.4.1.259.10.1.5.1.56.5.7 | ScalardaiTotalArpAclDroppedPkts | read-only | current | Indicates the total number of ARP packets dropped by ARP ACL. |
| 1.3.6.1.4.1.259.10.1.5.1.56.5.8 | ScalardaiTotalDhcpSnoopingDroppedPkts | read-only | current | Indicates the total number of ARP packets dropped by DHCP snooping. |
| 1.3.6.1.4.1.259.10.1.5.1.58 | NodeudpHelperMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.58.1 | ScalarudpHelperStatus | read-write | current | Set this variable to enabled(1) to enable UDP helper. Set this variable to disabled(2) to disable UDP helper. |
| 1.3.6.1.4.1.259.10.1.5.1.58.2 | TableudpHelperForwardProtocolTable | not-accessible | current | To specify which UDP ports the switch forwards when forwarding UDP broadcast packets. |
| 1.3.6.1.4.1.259.10.1.5.1.58.2.1 | RowudpHelperForwardProtocolEntry | not-accessible | current | A conceptual row of udpHelperForwardProtocolTable. |
| 1.3.6.1.4.1.259.10.1.5.1.58.2.1.1 | ColumnudpHelperForwardProtocolPort | not-accessible | current | The port number of the UDP protocol. Adding a helper address by udpHelperInetAddrTable causes the software to forward UDP broadcast packets. By this table, you… |
| 1.3.6.1.4.1.259.10.1.5.1.58.2.1.2 | ColumnudpHelperForwardProtocolStatus | read-create | current | Set this variable to valid(1) to enable forwarding of packets. Set this variable to invalid(2) to disable forwarding of packets. |
| 1.3.6.1.4.1.259.10.1.5.1.58.3 | TableudpHelperInetAddrTable | not-accessible | current | To forward UDP broadcasts, including BOOTP, received on an interface. After configuring an UDP helper address on an interface, the UDP broadcast packets on thi… |
| 1.3.6.1.4.1.259.10.1.5.1.58.3.1 | RowudpHelperInetAddrEntry | not-accessible | current | A conceptual row of udpHelperInetAddrTable. |
| 1.3.6.1.4.1.259.10.1.5.1.58.3.1.1 | ColumnudpHelperInetAddrVlanIndex | not-accessible | current | The VLAN-ID or other identifier refering to this VLAN. Based on dot1qVlanIndex in the Q-BRIDGE-MIB. |
| 1.3.6.1.4.1.259.10.1.5.1.58.3.1.2 | ColumnudpHelperInetAddrType | not-accessible | current | The address type of the helper address. |
| 1.3.6.1.4.1.259.10.1.5.1.58.3.1.3 | ColumnudpHelperInetAddr | not-accessible | current | The Internet address of the helper address. |
| 1.3.6.1.4.1.259.10.1.5.1.58.3.1.4 | ColumnudpHelperInetAddrStatus | read-create | current | To forward UDP broadcasts, including BOOTP, received from the specified interface, to the specified address. Set this variable to valid(1) to enable forwarding… |
| 1.3.6.1.4.1.259.10.1.5.1.62 | NodeerpsMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.62.1 | ScalarerpsGlobalStatus | read-write | current | Configures the ERPS function for an entire switch. Note that the ERPS domain will not take effect unless it becomes active and the global status is enabled. |
| 1.3.6.1.4.1.259.10.1.5.1.62.2 | TableerpsDomainTable | not-accessible | current | Table for ERPS domain configuration. |
| 1.3.6.1.4.1.259.10.1.5.1.62.2.1 | RowerpsDomainEntry | not-accessible | current | Entry for ERPS domain configuration. |
| 1.3.6.1.4.1.259.10.1.5.1.62.2.1.1 | ColumnerpsDomainIndex | not-accessible | current | An index that uniquely identifies an entry in the erpsDomainTable. |
| 1.3.6.1.4.1.259.10.1.5.1.62.2.1.2 | ColumnerpsDomainName | read-create | current | The domain name that uniquely identifies an entry in the erpsDomainTable. |
| 1.3.6.1.4.1.259.10.1.5.1.62.2.1.3 | ColumnerpsDomainMegLevel | read-create | current | Configures the maintenance entity group (MEG) level which is used to provide a communication channel for ring automatic protection switching (R-APS) informatio… |
| 1.3.6.1.4.1.259.10.1.5.1.62.2.1.4 | ColumnerpsDomainNodeId | read-create | current | Configures the node id whcih is a MAC address unique to the ring node. |
| 1.3.6.1.4.1.259.10.1.5.1.62.2.1.5 | ColumnerpsDomainWestRingPort | read-create | current | Each node on the ring connects to the ring through two ports. As part of the protection switching scheme, one port can be configured as the west port for the s… |
| 1.3.6.1.4.1.259.10.1.5.1.62.2.1.6 | ColumnerpsDomainEastRingPort | read-create | current | Each node on the ring connects to the ring through two ports. As part of the protection switching scheme, one port can be configured as the east port for the s… |
| 1.3.6.1.4.1.259.10.1.5.1.62.2.1.7 | ColumnerpsDomainRplOwner | read-create | current | Set to enabled(1) to make this node act as a RPL owner. |
| 1.3.6.1.4.1.259.10.1.5.1.62.2.1.8 | ColumnerpsDomainRplPort | read-only | current | This value displays the port for ring protection link which under normal conditions, i.e., without any failure or request, is blocked for traffic channel, to p… |
| 1.3.6.1.4.1.259.10.1.5.1.62.2.1.9 | ColumnerpsDomainGuardTimer | read-create | current | Configures the value of the guard timer which is used to prevent ring nodes from receiving outdated R-APS messages. The range is in 10 ms steps between 10 ms a… |
| 1.3.6.1.4.1.259.10.1.5.1.62.2.1.10 | ColumnerpsDomainHoldoffTimer | read-create | current | Configures the value of the holdoff timer which is used to prevent reporting error event immediately to protection switching if the provisioned holdoff timer v… |
| 1.3.6.1.4.1.259.10.1.5.1.62.2.1.11 | ColumnerpsDomainWtrTimer | read-create | current | Configures the value of the wait-to-restore timer which is used by the RPL owner node to prevent frequent switching operations that may be caused by intermitte… |
| 1.3.6.1.4.1.259.10.1.5.1.62.2.1.12 | ColumnerpsDomainControlVlanID | read-create | current | This is defined as dot1qVlanIndex in the Q-BRIDGE-MIB. Configures one control VLAN for each ERPS domain. The control VLAN is used only to send and receive ERPS… |
| 1.3.6.1.4.1.259.10.1.5.1.62.2.1.13 | ColumnerpsDomainNodeState | read-only | current | |
| 1.3.6.1.4.1.259.10.1.5.1.62.2.1.14 | ColumnerpsDomainWestRingPortState | read-only | current | This value displays the west ring port's current state. It displays one of the following states (1). unknown (The port's current state will stay in unknown sta… |
| 1.3.6.1.4.1.259.10.1.5.1.62.2.1.15 | ColumnerpsDomainEastRingPortState | read-only | current | This value displays the east ring port's current state. It displays one of the following states (1). unknown (The port's current state will stay in unknown sta… |
| 1.3.6.1.4.1.259.10.1.5.1.62.2.1.16 | ColumnerpsDomainRowStatus | read-create | current | The status of this conceptual row entry. This object is used to manage the creation and deletion of conceptual rows. The status column has six defined values: … |
| 1.3.6.1.4.1.259.10.1.5.1.62.2.1.17 | ColumnerpsDomainMajorDomainIndex | read-create | current | An index that uniquely identifies an entry in the erpsDomainTable. A value of 0 means this domain has no major domain. Notes: This objest can not be configured… |
| 1.3.6.1.4.1.259.10.1.5.1.62.2.1.18 | ColumnerpsDomainPropagateTC | read-create | current | Set to enabled(1) to transmit topology change signal to the major domain. It will not take effect, if erpsDomainMajorDomainIndex has a value of 0. |
| 1.3.6.1.4.1.259.10.1.5.1.62.2.1.20 | ColumnerpsDomainWestMepId | read-create | current | Configures a CFM Down MEP on west ring port. A down MEP can be uniquely select by given a MEPID, domain's MEG level, and domain's control VLAN ID. A value of 0… |
| 1.3.6.1.4.1.259.10.1.5.1.62.2.1.21 | ColumnerpsDomainEastMepId | read-create | current | Configures a CFM Down MEP on east ring port. A down MEP can be uniquely select by given a MEPID, domain's MEG level, and domain's control VLAN ID. A value of 0… |
| 1.3.6.1.4.1.259.10.1.5.1.62.2.1.22 | ColumnerpsDomainNonErpsDevProtect | read-create | current | Set to enabled(1) to use non-standard protection mechanism for network containing non-ERPS devices. |
| 1.3.6.1.4.1.259.10.1.5.1.65 | Nodeipv6TunnelMgt | |||
| 1.3.6.1.4.1.259.10.1.5.1.65.1 | Tableipv6TunnelTable | not-accessible | current | Table for configuration in IPv6 Tunnel management. |
| 1.3.6.1.4.1.259.10.1.5.1.65.1.1 | Rowipv6TunnelEntry | not-accessible | current | Entry for configuration in IPv6 Tunnel management. |
| 1.3.6.1.4.1.259.10.1.5.1.65.1.1.1 | Columnipv6TunnelIndex | read-only | current | The tunnel interface index. |
| 1.3.6.1.4.1.259.10.1.5.1.65.1.1.2 | Columnipv6TunnelNdRaSuppress | read-write | current | To set router advertisement transmission. |
| 1.3.6.1.4.1.259.10.1.5.1.65.1.1.3 | Columnipv6TunnelMode | read-write | current | To set ipv6 tunnel mode.configured(1) is for static tunnel, sixtofour(2) and isatap(3) are for dynamic tunnels |
| 1.3.6.1.4.1.259.10.1.5.1.65.1.1.4 | Columnipv6TunnelTtl | read-write | current | To set ttl value of ipv4 header of ipv6 encapsulation for tunneling. |
| 1.3.6.1.4.1.259.10.1.5.1.65.1.1.5 | Columnipv6TunnelDestination | read-write | current | To set tunnel destination/remote endpoint on the tunnel interface. |
| 1.3.6.1.4.1.259.10.1.5.1.65.1.1.6 | Columnipv6TunnelSourceVlanIfindex | read-write | current | To set tunnel source/local endpoint interface on the tunnel interface. |
| 1.3.6.1.4.1.259.10.1.5.1.65.1.1.7 | Columnipv6TunnelRowStatus | read-write | current | Row status of the tunnel interface. |
| 1.3.6.1.4.1.259.10.1.5.2 | Nodeecs4610-24fNotifications | |||
| 1.3.6.1.4.1.259.10.1.5.2.1 | Nodeecs4610-24fTraps | |||
| 1.3.6.1.4.1.259.10.1.5.2.1.0 | Nodeecs4610-24fTrapsPrefix | |||
| 1.3.6.1.4.1.259.10.1.5.2.1.0.1 | NotificationswPowerStatusChangeTrap | current | This trap is sent when the power state changes. | |
| 1.3.6.1.4.1.259.10.1.5.2.1.0.36 | NotificationswPortSecurityTrap | current | This trap is sent when the port is being intruded. This trap will only be sent when the portSecAction is set to trap(2) or trapAndShutdown(4). | |
| 1.3.6.1.4.1.259.10.1.5.2.1.0.40 | NotificationswIpFilterRejectTrap | current | This trap is sent when an incorrect IP address is rejected by the ipfilter. | |
| 1.3.6.1.4.1.259.10.1.5.2.1.0.41 | NotificationswSmtpConnFailureTrap | current | This trap is triggered if the SMTP system cannot open a connection to the mail server successfully. | |
| 1.3.6.1.4.1.259.10.1.5.2.1.0.56 | NotificationswMainBoardVerMismatchNotificaiton | current | This trap is sent when the slave version is mismatch with the master version. This trap will binds two object, the first object indicate the master version, wh… | |
| 1.3.6.1.4.1.259.10.1.5.2.1.0.70 | NotificationswAtcBcastStormAlarmFireTrap | current | When the broadcast traffic is detected as the storm, this trap will be fired. | |
| 1.3.6.1.4.1.259.10.1.5.2.1.0.71 | NotificationswAtcBcastStormAlarmClearTrap | current | When the broadcast storm is detected as the normal traffic, this trap will be fired. | |
| 1.3.6.1.4.1.259.10.1.5.2.1.0.72 | NotificationswAtcBcastStormTcApplyTrap | current | When the ATC is activated, this trap will be fired. | |
| 1.3.6.1.4.1.259.10.1.5.2.1.0.73 | NotificationswAtcBcastStormTcReleaseTrap | current | When the ATC is released, this trap will be fired. | |
| 1.3.6.1.4.1.259.10.1.5.2.1.0.74 | NotificationswAtcMcastStormAlarmFireTrap | current | When the multicast traffic is detected as the storm, this trap will be fired. | |
| 1.3.6.1.4.1.259.10.1.5.2.1.0.75 | NotificationswAtcMcastStormAlarmClearTrap | current | When the multicast storm is detected as the normal traffic, this trap will be fired. | |
| 1.3.6.1.4.1.259.10.1.5.2.1.0.76 | NotificationswAtcMcastStormTcApplyTrap | current | When the ATC is activated, this trap will be fired. | |
| 1.3.6.1.4.1.259.10.1.5.2.1.0.77 | NotificationswAtcMcastStormTcReleaseTrap | current | When the ATC is released, this trap will be fired. | |
| 1.3.6.1.4.1.259.10.1.5.2.1.0.95 | NotificationswLoopbackDetectionTrap | current | This trap will be sent when loopback BPDUs have been detected. | |
| 1.3.6.1.4.1.259.10.1.5.2.1.0.96 | NotificationnetworkAccessPortLinkDetectionTrap | current | This trap is sent when a networkAccessPortLinkDetection event is triggered. | |
| 1.3.6.1.4.1.259.10.1.5.2.1.0.107 | NotificationswCpuUtiRisingNotification | current | This notification indicates that the CPU utilization crossed cpuUtiRisingThreshold. | |
| 1.3.6.1.4.1.259.10.1.5.2.1.0.108 | NotificationswCpuUtiFallingNotification | current | This notification indicates that the CPU utilization crossed cpuUtiFallingThreshold. | |
| 1.3.6.1.4.1.259.10.1.5.2.1.0.109 | NotificationswMemoryUtiRisingThresholdNotification | current | This notification indicates that the memory utilization crossed memoryUtiRisingThreshold. | |
| 1.3.6.1.4.1.259.10.1.5.2.1.0.110 | NotificationswMemoryUtiFallingThresholdNotification | current | This notification indicates that the memory utilization crossed memoryUtiFallingThreshold. | |
| 1.3.6.1.4.1.259.10.1.5.2.1.0.139 | NotificationswLoginFailureTrap | current | This trap is sent when login fail via console,telnet, or web. | |
| 1.3.6.1.4.1.259.10.1.5.2.1.0.140 | NotificationswLoginSucceedTrap | current | This trap is sent when login succeed via console,telnet, or web. | |
| 1.3.6.1.4.1.259.10.1.5.3 | Nodeecs4610-24fConformance |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AreaID | IpAddress | current | An OSPF Area Identifier. |
| BigMetric | Integer32 (0..'FFFFFF'h) | current | The OSPF External Metric. |
| DesignatedRouterPriority | Integer32 (0..'FF'h) | current | The values defined for the priority of a system for becoming the designated router. |
| HelloRange | Integer32 (1..'FFFF'h) | current | The range of intervals on which hello messages are exchanged. |
| KeySegment | DisplayString(SIZE(0..128)) | current | The total length of the key is 1024 characters, it is divided into 8 parts and stored in 8 separated mib variables as below: Key1: part 1 of the key (1-128) Key2: part 2 of the key (129-256) Key3: part 3 of the key (257… |
| OspfAuthenticationType | INTEGER { none (0), simplePassword (1), md5 (2) } | current | The authentication type. |
| PositiveInteger | Integer32 (0..'7FFFFFFF'h) | current | A positive integer. Values in excess are precluded as unnecessary and prone to interoperability issues. |
| RouterID | IpAddress | current | A OSPF Router Identifier. |
| StaPathCostMode | INTEGER { short(1), long(2) } | current | The path cost mode of a spanning tree algorithm, short(1) indicates that we retrieve/configure the spanning tree path cost as a 16 bit value and long(2) indicates that we retrieve/configure the spanning tree path cost a… |
| Status | INTEGER { enabled (1), disabled (2) } | current | The status of an interface: 'enabled' indicates that it is willing to communicate with other OSPF Routers, while 'disabled' indicates that it is not. |
| UpToMaxAge | Integer32 (0..3600) | current | The values that one might find or configure for variables bounded by the maximum age of an LSA. |
| ValidStatus | INTEGER { valid(1), invalid(2) } | current | A simple status value for the object to create and destroy a table entry. This is a simplified variant of RowStatus as it supports only two values. Setting it to valid(1) creates an entry. Setting it to invalid(2) destr… |