ECX25EXT-MIB
182 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises Gauge TimeTicks |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.434 | Nodeeicon | |||
| 1.3.6.1.4.1.434.2 | Nodemanagement | |||
| 1.3.6.1.4.1.434.2 | Nodex25Reset | If the PLE sends or receives a reset, the agent should send an x25Reset trap. | ||
| 1.3.6.1.4.1.434.2.2 | Nodemibv2 | |||
| 1.3.6.1.4.1.434.2.2.4 | Nodemodule | |||
| 1.3.6.1.4.1.434.2.2.4.5 | Nodex25ext | |||
| 1.3.6.1.4.1.434.2.2.4.5.1 | Tablex25CountersTable | not-accessible | mandatory | Runtime counters table, one row per port |
| 1.3.6.1.4.1.434.2.2.4.5.1.1 | Rowx25CountEntry | not-accessible | mandatory | The set of counters for one port. |
| 1.3.6.1.4.1.434.2.2.4.5.1.1.1 | Columnx25CountPortRef | read-only | mandatory | The Port reference on which the X25 is running. |
| 1.3.6.1.4.1.434.2.2.4.5.1.1.2 | Columnx25RestartReqTxs | read-only | mandatory | Restart request frames transmitted |
| 1.3.6.1.4.1.434.2.2.4.5.1.1.3 | Columnx25RestartReqRxs | read-only | mandatory | Restart request frames received |
| 1.3.6.1.4.1.434.2.2.4.5.1.1.4 | Columnx25ClearReqTxs | read-only | mandatory | Clear request frames transmitted |
| 1.3.6.1.4.1.434.2.2.4.5.1.1.5 | Columnx25ClearReqRxs | read-only | mandatory | Clear request frames received |
| 1.3.6.1.4.1.434.2.2.4.5.1.1.6 | Columnx25ResetReqTxs | read-only | mandatory | Reset request frames transmitted |
| 1.3.6.1.4.1.434.2.2.4.5.1.1.7 | Columnx25ResetReqRxs | read-only | mandatory | Reset request frames received |
| 1.3.6.1.4.1.434.2.2.4.5.1.1.8 | Columnx25InterrReqTxs | read-only | mandatory | Interrupt request frames transmitted |
| 1.3.6.1.4.1.434.2.2.4.5.1.1.9 | Columnx25InterrReqRxs | read-only | mandatory | Interrupt request frames received |
| 1.3.6.1.4.1.434.2.2.4.5.1.1.10 | Columnx25RNRsTxs | read-only | mandatory | Receiver not ready frames transmitted |
| 1.3.6.1.4.1.434.2.2.4.5.1.1.11 | Columnx25RNRsRxs | read-only | mandatory | Receiver not ready frames received |
| 1.3.6.1.4.1.434.2.2.4.5.1.1.12 | Columnx25REJsTxs | read-only | mandatory | Reject frames transmitted |
| 1.3.6.1.4.1.434.2.2.4.5.1.1.13 | Columnx25REJsRxs | read-only | mandatory | Reject frames received |
| 1.3.6.1.4.1.434.2.2.4.5.1.1.14 | Columnx25CallConfirmTxs | read-only | mandatory | Call confirm transmitted. |
| 1.3.6.1.4.1.434.2.2.4.5.1.1.15 | Columnx25CallConfirmRxs | read-only | mandatory | Call confirm received. |
| 1.3.6.1.4.1.434.2.2.4.5.1.1.16 | Columnx25RRTxs | read-only | mandatory | Receiver ready transmitted |
| 1.3.6.1.4.1.434.2.2.4.5.1.1.17 | Columnx25RRRxs | read-only | mandatory | Receiver ready received |
| 1.3.6.1.4.1.434.2.2.4.5.1.1.18 | Columnx25IntConfirmTxs | read-only | mandatory | Interrupt confirm transmitted |
| 1.3.6.1.4.1.434.2.2.4.5.1.1.19 | Columnx25IntConfirmRxs | read-only | mandatory | Interrupt confirm received |
| 1.3.6.1.4.1.434.2.2.4.5.1.1.20 | Columnx25ClrConfirmTxs | read-only | mandatory | Clear confirmation transmitted. |
| 1.3.6.1.4.1.434.2.2.4.5.1.1.21 | Columnx25ClrConfirmRxs | read-only | mandatory | Clear confirmation received. |
| 1.3.6.1.4.1.434.2.2.4.5.1.1.22 | Columnx25ResetConfirmTxs | read-only | mandatory | Reset confirm transmitted. |
| 1.3.6.1.4.1.434.2.2.4.5.1.1.23 | Columnx25ResetConfirmRxs | read-only | mandatory | Reset confirm received. |
| 1.3.6.1.4.1.434.2.2.4.5.1.1.24 | Columnx25RestartConfirmTxs | read-only | mandatory | Restart confirm transmitted. |
| 1.3.6.1.4.1.434.2.2.4.5.1.1.25 | Columnx25RestartConfirmRxs | read-only | mandatory | Restart confirm received. |
| 1.3.6.1.4.1.434.2.2.4.5.1.1.26 | Columnx25CallReqTxs | read-only | mandatory | The number of requests transmitted for a connection. |
| 1.3.6.1.4.1.434.2.2.4.5.1.1.27 | Columnx25CallReqRxs | read-only | mandatory | The number of requests received for a connection. |
| 1.3.6.1.4.1.434.2.2.4.5.1.1.28 | Columnx25RegisterReqTxs | read-only | mandatory | The number of register packets sent. Register packets are used to exchange registration information. |
| 1.3.6.1.4.1.434.2.2.4.5.1.1.29 | Columnx25RegisterReqRxs | read-only | mandatory | The number of register packets received. |
| 1.3.6.1.4.1.434.2.2.4.5.1.1.30 | Columnx25RegisterConfirmTxs | read-only | mandatory | Register confirm transmitted. |
| 1.3.6.1.4.1.434.2.2.4.5.1.1.31 | Columnx25RegisterConfirmRxs | read-only | mandatory | Register confirm received. |
| 1.3.6.1.4.1.434.2.2.4.5.1.1.32 | Columnx25DataSegmentsTxs | read-only | mandatory | The number of 64 bytes data blocks sent. |
| 1.3.6.1.4.1.434.2.2.4.5.1.1.33 | Columnx25DataSegmentsRxs | read-only | mandatory | The number of 64 bytes data blocks received. |
| 1.3.6.1.4.1.434.2.2.4.5.1.1.34 | Columnx25CaractersTxs | read-only | mandatory | The number of characters sent. |
| 1.3.6.1.4.1.434.2.2.4.5.1.1.35 | Columnx25CaractersRxs | read-only | mandatory | The number of characters received. |
| 1.3.6.1.4.1.434.2.2.4.5.1.1.36 | Columnx25DiagnosticPktsTxs | read-only | mandatory | The number of error information packets sent. |
| 1.3.6.1.4.1.434.2.2.4.5.1.1.37 | Columnx25DiagnosticPktsRxs | read-only | mandatory | The number of error information packets received. |
| 1.3.6.1.4.1.434.2.2.4.5.1.1.38 | Columnx25UnknownPktsTxs | read-only | mandatory | The number of packets that could not be recognized as following the X.25 structure sent. |
| 1.3.6.1.4.1.434.2.2.4.5.1.1.39 | Columnx25UnknownPktsRxs | read-only | mandatory | The number of packets that could not be recognized as following the X.25 structure received. |
| 1.3.6.1.4.1.434.2.2.4.5.2 | Tablex25VCCallParmTable | not-accessible | mandatory | This table contains only the objects of the Internet x25CallParmTable which are available from the EiconCard. For the complete description of x25CallParmTable,… |
| 1.3.6.1.4.1.434.2.2.4.5.2.1 | Rowx25VCCallParmEntry | not-accessible | mandatory | Entries of x25VCCallParmTable. |
| 1.3.6.1.4.1.434.2.2.4.5.2.1.1 | Columnx25VCCallParmPortIndex | read-only | mandatory | The Port reference on which the X25 is running. |
| 1.3.6.1.4.1.434.2.2.4.5.2.1.2 | Columnx25VCCallParmVCIndex | read-only | mandatory | The number of Virtual Circuits. |
| 1.3.6.1.4.1.434.2.2.4.5.2.1.3 | Columnx25VCCallParmInPacketSize | read-write | mandatory | The maximum receive packet size in octets for a circuit. A size of zero for a circuit means use the PLE default size. A size of zero for the PLE means use a de… |
| 1.3.6.1.4.1.434.2.2.4.5.2.1.4 | Columnx25VCCallParmOutPacketSize | read-write | mandatory | The maximum transmit packet size in octets for a circuit. A size of zero for a circuit means use the PLE default size. A size of zero for the PLE default means… |
| 1.3.6.1.4.1.434.2.2.4.5.2.1.5 | Columnx25VCCallParmInWindowSize | read-write | mandatory | The receive window size for a circuit. A size of zero for a circuit means use the PLE default size. A size of zero for the PLE default means use 2. |
| 1.3.6.1.4.1.434.2.2.4.5.2.1.6 | Columnx25VCCallParmOutWindowSize | read-write | mandatory | The transmit window size for a circuit. A size of zero for a circuit means use the PLE default size. A size of zero for the PLE default means use 2. |
| 1.3.6.1.4.1.434.2.2.4.5.2.1.7 | Columnx25VCCallParmUserData | read-write | mandatory | The call user data as placed in the packet. A zero length string indicates no call user data. If both the circuit call parameters and the PLE default have call… |
| 1.3.6.1.4.1.434.2.2.4.5.2.1.8 | Columnx25VCCallParmCallingNetworkFacilities | read-write | mandatory | The calling network facilities. The facilities are encoded here exactly as encoded in the call packet. These facilities do not include the marker facility code… |
| 1.3.6.1.4.1.434.2.2.4.5.2.1.9 | Columnx25VCCallParmCalledNetworkFacilities | read-write | mandatory | The called network facilities. The facilities are encoded here exactly as encoded in the call packet. These facilities do not include the marker facility code.… |
| 1.3.6.1.4.1.434.2.2.4.5.3 | Tablex25OperTable | not-accessible | mandatory | The operation parameters in use by the X.25 PLE. |
| 1.3.6.1.4.1.434.2.2.4.5.3.1 | Rowx25OperEntry | not-accessible | mandatory | Entries of x25OperTable. |
| 1.3.6.1.4.1.434.2.2.4.5.3.1.1 | Columnx25OperIndex | read-only | mandatory | The ifIndex value for the X.25 interface. |
| 1.3.6.1.4.1.434.2.2.4.5.3.1.2 | Columnx25OperInterfaceMode | read-only | mandatory | Identifies DCE/DTE mode in which the interface operates. A value of dxe indicates the role will be determined by XID negotiation at the Link Layer and that neg… |
| 1.3.6.1.4.1.434.2.2.4.5.3.1.3 | Columnx25OperMaxActiveCircuits | read-only | mandatory | Maximum number of circuits this PLE can support. |
| 1.3.6.1.4.1.434.2.2.4.5.3.1.4 | Columnx25OperPacketSequencing | read-only | mandatory | The modulus of the packet sequence number space. |
| 1.3.6.1.4.1.434.2.2.4.5.3.1.5 | Columnx25OperRestartTimer | read-only | mandatory | The T20 restart timer in milliseconds. |
| 1.3.6.1.4.1.434.2.2.4.5.3.1.6 | Columnx25OperCallTimer | read-only | mandatory | The T21 Call timer in milliseconds. |
| 1.3.6.1.4.1.434.2.2.4.5.3.1.7 | Columnx25OperResetTimer | read-only | mandatory | The T22 Reset timer in milliseconds. |
| 1.3.6.1.4.1.434.2.2.4.5.3.1.8 | Columnx25OperClearTimer | read-only | mandatory | The T23 Clear timer in milliseconds. |
| 1.3.6.1.4.1.434.2.2.4.5.3.1.9 | Columnx25OperWindowTimer | read-only | mandatory | The T24 window status transmission timer milliseconds. A value of 2147483647 indicates no window timer in use. |
| 1.3.6.1.4.1.434.2.2.4.5.3.1.10 | Columnx25OperDataRxmtTimer | read-only | mandatory | The T25 Data Retransmission timer in milliseconds. A value of 2147483647 indicates no data retransmission timer in use. |
| 1.3.6.1.4.1.434.2.2.4.5.3.1.11 | Columnx25OperInterruptTimer | read-only | mandatory | The T26 Interrupt timer in milliseconds. A value of 2147483647 indicates interrupts are not being used. |
| 1.3.6.1.4.1.434.2.2.4.5.3.1.12 | Columnx25OperRejectTimer | read-only | mandatory | The T27 Reject retransmission timer in milliseconds. A value of 2147483647 indicates no reject timer in use. |
| 1.3.6.1.4.1.434.2.2.4.5.3.1.13 | Columnx25OperRegistrationRequestTimer | read-only | mandatory | The T28 registration timer in milliseconds. A value of 2147483647 indicates no registration timer in use. |
| 1.3.6.1.4.1.434.2.2.4.5.3.1.14 | Columnx25OperMinimumRecallTimer | read-only | mandatory | Minimum time interval between unsuccessful call attempts in milliseconds. |
| 1.3.6.1.4.1.434.2.2.4.5.3.1.15 | Columnx25OperRestartCount | read-only | mandatory | The R20 restart retransmission count. |
| 1.3.6.1.4.1.434.2.2.4.5.3.1.16 | Columnx25OperResetCount | read-only | mandatory | The r22 Reset retransmission count. |
| 1.3.6.1.4.1.434.2.2.4.5.3.1.17 | Columnx25OperClearCount | read-only | mandatory | The r23 Clear retransmission count. |
| 1.3.6.1.4.1.434.2.2.4.5.3.1.18 | Columnx25OperDataRxmtCount | read-only | mandatory | The R25 Data retransmission count. This value is undefined if the x25OperDataRxmtTimer indicates no timer in use. |
| 1.3.6.1.4.1.434.2.2.4.5.3.1.19 | Columnx25OperRejectCount | read-only | mandatory | The R27 reject retransmission count. This value is undefined if the x25OperRejectTimer indicates no timer in use. |
| 1.3.6.1.4.1.434.2.2.4.5.3.1.20 | Columnx25OperRegistrationRequestCount | read-only | mandatory | The R28 Registration retransmission Count. This value is undefined if the x25OperREgistrationRequestTimer indicates no timer in use. |
| 1.3.6.1.4.1.434.2.2.4.5.3.1.21 | Columnx25OperNumberPVCs | read-only | mandatory | The number of PVC configured for this PLE. The PVCs use channel numbers from 1 to this number. |
| 1.3.6.1.4.1.434.2.2.4.5.3.1.22 | Columnx25OperDefCallParamId | read-only | mandatory | This identifies the instance of the x25CallParmIndex for the entry in the x25CallParmTable that contains the default call parameters for this PLE. |
| 1.3.6.1.4.1.434.2.2.4.5.3.1.23 | Columnx25OperLocalAddress | read-only | mandatory | The local address for this PLE subnetwork. A zero length address maybe returned by PLEs that only support PVCs. |
| 1.3.6.1.4.1.434.2.2.4.5.3.1.24 | Columnx25OperDataLinkId | read-only | mandatory | This identifies the instance of the index object in the first table of the most device specific MIB for the interface used by this PLE. |
| 1.3.6.1.4.1.434.2.2.4.5.3.1.25 | Columnx25OperProtocolVersionSupported | read-only | mandatory | Identifies the version of the X.25 protocol this interface supports. Object identifiers for common versions are defined below in the x25ProtocolVersion subtree. |
| 1.3.6.1.4.1.434.2.2.4.5.4 | Tablex25StatTable | not-accessible | mandatory | Statistics information about this X.25 PLE. |
| 1.3.6.1.4.1.434.2.2.4.5.4.1 | Rowx25StatEntry | not-accessible | mandatory | Entries of the x25StatTable. |
| 1.3.6.1.4.1.434.2.2.4.5.4.1.1 | Columnx25StatIndex | read-only | mandatory | The ifIndex value for the X.25 interface. |
| 1.3.6.1.4.1.434.2.2.4.5.4.1.2 | Columnx25StatInCalls | read-only | mandatory | The number of incoming calls received. |
| 1.3.6.1.4.1.434.2.2.4.5.4.1.3 | Columnx25StatInCallRefusals | read-only | mandatory | The number of incoming calls refused. This includes calls refused by the PLE and by higher layers. This also includes calls cleared because of restricted fast … |
| 1.3.6.1.4.1.434.2.2.4.5.4.1.4 | Columnx25StatInProviderInitiatedClears | read-only | mandatory | The number of clear requests with a cause code other than DTE initiated. |
| 1.3.6.1.4.1.434.2.2.4.5.4.1.5 | Columnx25StatInRemotelyInitiatedResets | read-only | mandatory | The number of reset requests received with cause code DTE initiated. |
| 1.3.6.1.4.1.434.2.2.4.5.4.1.6 | Columnx25StatInProviderInitiatedResets | read-only | mandatory | The number of reset requests received with cause code other than DTE initiated. |
| 1.3.6.1.4.1.434.2.2.4.5.4.1.7 | Columnx25StatInRestarts | read-only | mandatory | The number of remotely initiated (including provider initiated) restarts experienced by the PLE excluding the restart associated with bringing up the PLE inter… |
| 1.3.6.1.4.1.434.2.2.4.5.4.1.8 | Columnx25StatInDataPackets | read-only | mandatory | The number of data packets received. |
| 1.3.6.1.4.1.434.2.2.4.5.4.1.9 | Columnx25StatInAccusedOfProtocolErrors | read-only | mandatory | The number of packets received containing a procedure error cause code. These include clear, reset, restart, or diagnostic packets. |
| 1.3.6.1.4.1.434.2.2.4.5.4.1.10 | Columnx25StatInInterrupts | read-only | mandatory | The number of interrupt packets received by the PLE or over the PVC/VC. |
| 1.3.6.1.4.1.434.2.2.4.5.4.1.11 | Columnx25StatOutCallAttempts | read-only | mandatory | The number of calls attempted. |
| 1.3.6.1.4.1.434.2.2.4.5.4.1.12 | Columnx25StatOutCallFailures | read-only | mandatory | The number of call attempts which failed. This includes calls that were cleared because of restrictive fast select. |
| 1.3.6.1.4.1.434.2.2.4.5.4.1.13 | Columnx25StatOutInterrupts | read-only | mandatory | The number of interrupt packets send by the PLE or over the PVC/VC. |
| 1.3.6.1.4.1.434.2.2.4.5.4.1.14 | Columnx25StatOutDataPackets | read-only | mandatory | The number of data packets sent by this PLE. |
| 1.3.6.1.4.1.434.2.2.4.5.4.1.15 | Columnx25StatOutgoingCircuits | read-only | mandatory | The number of active outgoing circuits. This includes call requests sent but not yet confirmed. This does not count PVCs. |
| 1.3.6.1.4.1.434.2.2.4.5.4.1.16 | Columnx25StatIncomingCircuits | read-only | mandatory | The number of active Incoming Circuits. This includes call indications received but not yet acknowledged. This does not count PVCs. |
| 1.3.6.1.4.1.434.2.2.4.5.4.1.17 | Columnx25StatTwowayCircuits | read-only | mandatory | The number of active two-way Circuits. This includes call requests sent but not yet confirmed. This does not count PVCs. |
| 1.3.6.1.4.1.434.2.2.4.5.4.1.18 | Columnx25StatRestartTimeouts | read-only | mandatory | The number of times the T20 restart timer expired. |
| 1.3.6.1.4.1.434.2.2.4.5.4.1.19 | Columnx25StatCallTimeouts | read-only | mandatory | The number of times the T21 call timer expired. |
| 1.3.6.1.4.1.434.2.2.4.5.4.1.20 | Columnx25StatResetTimeouts | read-only | mandatory | The number of times the T22 reset timer expired. |
| 1.3.6.1.4.1.434.2.2.4.5.4.1.21 | Columnx25StatClearTimeouts | read-only | mandatory | The number of times the T23 clear timer expired. |
| 1.3.6.1.4.1.434.2.2.4.5.4.1.22 | Columnx25StatDataRxmtTimeouts | read-only | mandatory | The number of times the T25 data timer expired. |
| 1.3.6.1.4.1.434.2.2.4.5.4.1.23 | Columnx25StatInterruptTimeouts | read-only | mandatory | The number of times the T26 interrupt timer expired. |
| 1.3.6.1.4.1.434.2.2.4.5.4.1.24 | Columnx25StatRetryCountExceededs | read-only | mandatory | The number of times a retry counter was exhausted. |
| 1.3.6.1.4.1.434.2.2.4.5.4.1.25 | Columnx25StatClearCountExceededs | read-only | mandatory | The number of times the R23 clear count was exceeded. |
| 1.3.6.1.4.1.434.2.2.4.5.5 | Tablex25ChannelTable | not-accessible | mandatory | These objects contain information about the channel number configuration in an X.25 PLE. These values are the configured values. changes in these values after … |
| 1.3.6.1.4.1.434.2.2.4.5.5.1 | Rowx25ChannelEntry | not-accessible | mandatory | Entries of x25ChannelTable. |
| 1.3.6.1.4.1.434.2.2.4.5.5.1.1 | Columnx25ChannelIndex | read-only | mandatory | The ifIndex value for the X.25 Interface. |
| 1.3.6.1.4.1.434.2.2.4.5.5.1.2 | Columnx25ChannelLIC | read-write | mandatory | Lowest Incoming channel. |
| 1.3.6.1.4.1.434.2.2.4.5.5.1.3 | Columnx25ChannelHIC | read-write | mandatory | Highest Incoming channel. A value of zero indicates no channels in this range. |
| 1.3.6.1.4.1.434.2.2.4.5.5.1.4 | Columnx25ChannelLTC | read-write | mandatory | Lowest Two-way channel. |
| 1.3.6.1.4.1.434.2.2.4.5.5.1.5 | Columnx25ChannelHTC | read-write | mandatory | Highest Two-way channel. A value of zero indicates no channels in this range. |
| 1.3.6.1.4.1.434.2.2.4.5.5.1.6 | Columnx25ChannelLOC | read-write | mandatory | Lowest outgoing channel. |
| 1.3.6.1.4.1.434.2.2.4.5.5.1.7 | Columnx25ChannelHOC | read-write | mandatory | Highest outgoing channel. A value of zero indicates no channels in this range. |
| 1.3.6.1.4.1.434.2.2.4.5.6 | Tablex25CircuitTable | not-accessible | mandatory | These objects contain general information about a specific circuit of an X.25 PLE. |
| 1.3.6.1.4.1.434.2.2.4.5.6.1 | Rowx25CircuitEntry | not-accessible | mandatory | Entries of x25CircuitTable. |
| 1.3.6.1.4.1.434.2.2.4.5.6.1.1 | Columnx25CircuitIndex | read-only | mandatory | The ifIndex value for the X.25 Interface. |
| 1.3.6.1.4.1.434.2.2.4.5.6.1.2 | Columnx25CircuitChannel | read-only | mandatory | The channel number for this circuit. |
| 1.3.6.1.4.1.434.2.2.4.5.6.1.3 | Columnx25CircuitStatus | read-write | mandatory | This object reports the current status of the circuit. An existing instance of this object can only be set to startClear, startPvcResetting, or invalid. An ins… |
| 1.3.6.1.4.1.434.2.2.4.5.6.1.4 | Columnx25CircuitEstablishTime | read-only | mandatory | The value of sysUpTime when the channel was associated with this circuit. For outgoing SVCs, this is the time the first call packet was sent. For incoming SVCs… |
| 1.3.6.1.4.1.434.2.2.4.5.6.1.5 | Columnx25CircuitDirection | read-write | mandatory | The direction of the call that established this circuit. |
| 1.3.6.1.4.1.434.2.2.4.5.6.1.6 | Columnx25CircuitInOctets | read-only | mandatory | The number of octets of user data delivered to upper layer. |
| 1.3.6.1.4.1.434.2.2.4.5.6.1.7 | Columnx25CircuitInPdus | read-only | mandatory | The number of PDUs received for this circuit. |
| 1.3.6.1.4.1.434.2.2.4.5.6.1.8 | Columnx25CircuitInRemotelyInitiatedResets | read-only | mandatory | The number of Resets received for this circuit with cause code of DTE initiated. |
| 1.3.6.1.4.1.434.2.2.4.5.6.1.9 | Columnx25CircuitInProviderInitiatedResets | read-only | mandatory | The number of Resets received for this circuit with cause code other than DTE initiated. |
| 1.3.6.1.4.1.434.2.2.4.5.6.1.10 | Columnx25CircuitInInterrupts | read-only | mandatory | The number of interrupt packets received for this circuit. |
| 1.3.6.1.4.1.434.2.2.4.5.6.1.11 | Columnx25CircuitOutOctets | read-only | mandatory | The number of octets of user data sent for this circuit. |
| 1.3.6.1.4.1.434.2.2.4.5.6.1.12 | Columnx25CircuitOutPdus | read-only | mandatory | The number of PDUs sent for this circuit. |
| 1.3.6.1.4.1.434.2.2.4.5.6.1.13 | Columnx25CircuitOutInterrupts | read-only | mandatory | The number of interrupt packets sent on this circuit. |
| 1.3.6.1.4.1.434.2.2.4.5.6.1.14 | Columnx25CircuitDataRetransmissionTimeouts | read-only | mandatory | The number of times the T25 data retransmission timer expired for this circuit. |
| 1.3.6.1.4.1.434.2.2.4.5.6.1.15 | Columnx25CircuitResetTimeouts | read-only | mandatory | The number of times the T22 reset timer expired for this circuit. |
| 1.3.6.1.4.1.434.2.2.4.5.6.1.16 | Columnx25CircuitInterruptTimeouts | read-only | mandatory | The number of times the T26 Interrupt timer expired for this circuit. |
| 1.3.6.1.4.1.434.2.2.4.5.6.1.17 | Columnx25CircuitCallParamId | read-write | mandatory | This identifies the instance of the x25CallParmIndex for the entry in the x25CallParmTable which contains the call parameters in use with this circuit. The ent… |
| 1.3.6.1.4.1.434.2.2.4.5.6.1.18 | Columnx25CircuitCalledDteAddress | read-write | mandatory | For incoming calls, this is the called address from the call indication packet. For outgoing calls, this is the called address from the call confirmation packe… |
| 1.3.6.1.4.1.434.2.2.4.5.6.1.19 | Columnx25CircuitCallingDteAddress | read-write | mandatory | For incoming calls, this is the calling address from the call indication packet. For outgoing calls, this is the calling address from the call confirmation pac… |
| 1.3.6.1.4.1.434.2.2.4.5.6.1.20 | Columnx25CircuitOriginallyCalledAddress | read-write | mandatory | For incoming calls, this is the address in the call Redirection or Call Deflection Notification facility if the call was deflected or redirected, otherwise it … |
| 1.3.6.1.4.1.434.2.2.4.5.6.1.21 | Columnx25CircuitDescr | read-write | mandatory | A descriptive string associated with this circuit. This provides a place for the agent to supply any descriptive information it knows about the use or owner of… |
| 1.3.6.1.4.1.434.2.2.4.5.7 | Tablex25CallParmTable | not-accessible | mandatory | These objects contain the parameters that can be varied between X.25 calls. The entries in this table are independent of the PLE. There exists only one of thes… |
| 1.3.6.1.4.1.434.2.2.4.5.7.1 | Rowx25CallParmEntry | not-accessible | mandatory | Entries of x25CallParmTable. |
| 1.3.6.1.4.1.434.2.2.4.5.7.1.1 | Columnx25CallParmIndex | read-only | mandatory | A value that distinguishes this entry from another entry. Entries in this table are referenced from other objects which identify call parameters. It is impossi… |
| 1.3.6.1.4.1.434.2.2.4.5.7.1.2 | Columnx25CallParmStatus | read-write | mandatory | The status of this call parameter entry. See RFC 1271 for details of usage. |
| 1.3.6.1.4.1.434.2.2.4.5.7.1.3 | Columnx25CallParmRefCount | read-only | mandatory | The number of references know by a management station to exist to this set of call parameters. This is the number of other objects that have returned a value o… |
| 1.3.6.1.4.1.434.2.2.4.5.7.1.4 | Columnx25CallParmInPacketSize | read-write | mandatory | The maximum receive packet size in octets for a circuit. A size of zero for a circuit means use the PLE default size. A size of zero for the PLE means use a de… |
| 1.3.6.1.4.1.434.2.2.4.5.7.1.5 | Columnx25CallParmOutPacketSize | read-write | mandatory | The maximum transmit packet size in octets for a circuit. A size of zero for a circuit means use the PLE default size. A size of zero for the PLE default means… |
| 1.3.6.1.4.1.434.2.2.4.5.7.1.6 | Columnx25CallParmInWindowSize | read-write | mandatory | The receive window size for a circuit. A size of zero for a circuit means use the PLE default size. A size of zero for the PLE default means use 2. |
| 1.3.6.1.4.1.434.2.2.4.5.7.1.7 | Columnx25CallParmOutWindowSize | read-write | mandatory | The transmit window size for a circuit. A size of zero for a circuit means use the PLE default size. A size of zero for the PLE default means use 2. |
| 1.3.6.1.4.1.434.2.2.4.5.7.1.8 | Columnx25CallParmAcceptReverseCharging | read-write | mandatory | An enumeration defining if the PLE will accept or refuse charges. A value of default for a circuit means use the PLE default value. A value of neverAccept is o… |
| 1.3.6.1.4.1.434.2.2.4.5.7.1.9 | Columnx25CallParmProposeReverseCharging | read-write | mandatory | An enumeration defining if the PLE should propose reverse or local charging. The value of default for a circuit means use the PLE default. The value of default… |
| 1.3.6.1.4.1.434.2.2.4.5.7.1.10 | Columnx25CallParmFastSelect | read-write | mandatory | Expresses preference for use of fast select facility. The value of default for a circuit is the PLE default. A value of default for the PLE means noFastSelect.… |
| 1.3.6.1.4.1.434.2.2.4.5.7.1.11 | Columnx25CallParmInThruPutClasSize | read-write | mandatory | The incoming throughput class to negotiate. A value of tcDefault for a circuit means use the PLE default. A value of tcDefault for the PLE default means tcNone… |
| 1.3.6.1.4.1.434.2.2.4.5.7.1.12 | Columnx25CallParmOutThruPutClasSize | read-write | mandatory | The outgoing throughput class to negotiate. A value of tcDefault for a circuit means use the PLE default. A value of tcDefault for the PLE default means use tc… |
| 1.3.6.1.4.1.434.2.2.4.5.7.1.13 | Columnx25CallParmCug | read-write | mandatory | The Closed User Group to specify. This consists of two or four octets containing the characters 0 through 9. A zero length string indicates no facility request… |
| 1.3.6.1.4.1.434.2.2.4.5.7.1.14 | Columnx25CallParmCugoa | read-write | mandatory | The Closed User Group with Outgoing Access to specify. This consists of two or four octets containing the characters 0 through 9. A string length of three cont… |
| 1.3.6.1.4.1.434.2.2.4.5.7.1.15 | Columnx25CallParmBcug | read-write | mandatory | The Bilateral Closed User Group to specify. This consists of two octets containing the characters 0 through 9. A string length of three containing the characte… |
| 1.3.6.1.4.1.434.2.2.4.5.7.1.16 | Columnx25CallParmNui | read-write | mandatory | The Network User Identifier facility. This is binary value to be included immediately after the length field. The PLE will supply the length octet. A zero leng… |
| 1.3.6.1.4.1.434.2.2.4.5.7.1.17 | Columnx25CallParmChargingInfo | read-write | mandatory | The charging Information facility. A value of default for a circuit means use the PLE default. The value of default for the default PLE parameters means use no… |
| 1.3.6.1.4.1.434.2.2.4.5.7.1.18 | Columnx25CallParmRpoa | read-write | mandatory | The RPOA facility. The octet string contains n * 4 sequences of the characters 0-9 to specify a facility with n entries. The octet string containing the 3 char… |
| 1.3.6.1.4.1.434.2.2.4.5.7.1.19 | Columnx25CallParmTrnstDly | read-write | mandatory | The Transit Delay Selection and Indication value. A value of 65536 indicates no facility requested. A value of 65537 for a circuit means use the PLE default (t… |
| 1.3.6.1.4.1.434.2.2.4.5.7.1.20 | Columnx25CallParmCallingExt | read-write | mandatory | The Calling Extension facility. This contains one of the following: A sequence of hex digits with the value to be put in the facility. These digits will be con… |
| 1.3.6.1.4.1.434.2.2.4.5.7.1.21 | Columnx25CallParmCalledExt | read-write | mandatory | The Called Extension facility. This contains one of the following: A sequence of hex digits with the value to be put in the facility. These digits will be conv… |
| 1.3.6.1.4.1.434.2.2.4.5.7.1.22 | Columnx25CallParmInMinThuPutCls | read-write | mandatory | The minimum input throughput Class. A value of 16 for a circuit means use the PLE default (the PLE parameters entry may not use this value). A value of 17 indi… |
| 1.3.6.1.4.1.434.2.2.4.5.7.1.23 | Columnx25CallParmOutMinThuPutCls | read-write | mandatory | The minimum output throughput Class. A value of 16 for a circuit means use the PLE default (the PLE parameters entry may not use this value). A value of 17 ind… |
| 1.3.6.1.4.1.434.2.2.4.5.7.1.24 | Columnx25CallParmEndTrnsDly | read-write | mandatory | The End-to-End Transit Delay to negotiate. An octet string of length 2, 4, or 6 contains the facility encoded as specified in ISO/IEC 8208 section 15.3.2.4. An… |
| 1.3.6.1.4.1.434.2.2.4.5.7.1.25 | Columnx25CallParmPriority | read-write | mandatory | The priority facility to negotiate. The octet string encoded as specified in ISO/IEC 8208 section 15.3.2.5. A zero length string indicates no facility requeste… |
| 1.3.6.1.4.1.434.2.2.4.5.7.1.26 | Columnx25CallParmProtection | read-write | mandatory | A string contains the following: A hex string containing the value for the protection facility. This will be converted from hex to the octets actually in the p… |
| 1.3.6.1.4.1.434.2.2.4.5.7.1.27 | Columnx25CallParmExptData | read-write | mandatory | The Expedited Data facility to negotiate. A value of default for a circuit means use the PLE default value. The entry for the PLE default parameters may not ha… |
| 1.3.6.1.4.1.434.2.2.4.5.7.1.28 | Columnx25CallParmUserData | read-write | mandatory | The call user data as placed in the packet. A zero length string indicates no call user data. If both the circuit call parameters and the PLE default have call… |
| 1.3.6.1.4.1.434.2.2.4.5.7.1.29 | Columnx25CallParmCallingNetworkFacilities | read-write | mandatory | The calling network facilities. The facilities are encoded here exactly as encoded in the call packet. These facilities do not include the marker facility code… |
| 1.3.6.1.4.1.434.2.2.4.5.7.1.30 | Columnx25CallParmCalledNetworkFacilities | read-write | mandatory | The called network facilities. The facilities are encoded here exactly as encoded in the call packet. These facilities do not include the marker facility code.… |
| 1.3.6.1.4.1.434.451 | Nodex25Restart | This trap means the X.25 PLE sent or received a restart packet. The restart that brings up the link should not send a x25Restart trap so the interface should s… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DisplayString | OCTET STRING | ||
| EntryStatus | INTEGER { valid(1), createRequest(2), underCreation(3), invalid(4) } | ||
| IfIndexType | INTEGER (1..2147483647) | ||
| PositiveInteger | INTEGER (0..2147483647) | ||
| X121Address | OCTET STRING (SIZE(0..17)) |