EFDATA-MIB
154 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6247 | Nodeefdata | |||
| 1.3.6.1.4.1.6247.3 | Nodespectracast | |||
| 1.3.6.1.4.1.6247.3.1 | Nodedtmx5000 | |||
| 1.3.6.1.4.1.6247.3.1.1 | NodecbGateway | |||
| 1.3.6.1.4.1.6247.3.1.1.1 | NodecbStatistics | |||
| 1.3.6.1.4.1.6247.3.1.1.1.1 | NodecbStatGeneral | |||
| 1.3.6.1.4.1.6247.3.1.1.1.1.1 | ScalarcbStatNumBytesTXed | read-only | mandatory | Number of bytes transmitted since last statistics reset. |
| 1.3.6.1.4.1.6247.3.1.1.1.1.2 | ScalarcbStatNumOfPackets | read-only | mandatory | Number of data packets transmitted since last statistics reset. |
| 1.3.6.1.4.1.6247.3.1.1.1.1.3 | ScalarcbStatAvrPktSize | read-only | mandatory | Average packet size since last statistics reset. |
| 1.3.6.1.4.1.6247.3.1.1.1.1.4 | ScalarcbStatAvrBytesPerSec | read-only | mandatory | Average speed in bytes per second since last statistics reset. |
| 1.3.6.1.4.1.6247.3.1.1.1.1.5 | ScalarcbStatNumPacketDiscarded | read-only | mandatory | Number of data packets that were discarded since last statistics reset. |
| 1.3.6.1.4.1.6247.3.1.1.1.1.6 | ScalarcbStatNumNMSFrames | read-only | mandatory | Number of NMS packets received since last statistics reset. |
| 1.3.6.1.4.1.6247.3.1.1.1.1.7 | ScalarcbCPULoad | read-only | mandatory | Current CPU Load in percents (0-100). |
| 1.3.6.1.4.1.6247.3.1.1.1.1.8 | ScalarcbMemoryUsage | read-only | mandatory | Current Memory Usage in percents (0-100). |
| 1.3.6.1.4.1.6247.3.1.1.1.1.9 | ScalarcbStatReset | write-only | mandatory | Set to cbTrue in order to reset the general statistics values (either in active or non-active mode). |
| 1.3.6.1.4.1.6247.3.1.1.1.1.10 | ScalarcbStatNumClients | read-only | mandatory | Number of clients currently connected to the Gateway. It is not part of the General Statistics since the cbStatReset does not change its value. |
| 1.3.6.1.4.1.6247.3.1.1.1.2 | NodecbStatClient | |||
| 1.3.6.1.4.1.6247.3.1.1.1.2.1 | ScalarcbClientIP | read-write | mandatory | The IP address of the client. The rest of the params in cbStatClient reffers to this IP. In order to get a statistics on a single clients, set cbClientIP to th… |
| 1.3.6.1.4.1.6247.3.1.1.1.2.2 | NodecbClientStatistics | |||
| 1.3.6.1.4.1.6247.3.1.1.1.2.2.1 | ScalarcbClNumSeconds | read-only | mandatory | The number of seconds since the client statistics are active. The statistics values are reset automaticaly by the gateway (as well as by setting cbClReset) acc… |
| 1.3.6.1.4.1.6247.3.1.1.1.2.2.2 | ScalarcbClNumKBytes | read-only | mandatory | Number of bytes transmitted to IP==cbClientIP in the last cbClNumSeconds seconds. |
| 1.3.6.1.4.1.6247.3.1.1.1.2.2.3 | ScalarcbClNumPackets | read-only | mandatory | Number of packets transmitted to IP==cbClientIP in the last cbClNumSeconds seconds. |
| 1.3.6.1.4.1.6247.3.1.1.1.2.2.4 | ScalarcbClAvrBytesPerSecond | read-only | mandatory | Average transfer rate in bytes per second for this client. |
| 1.3.6.1.4.1.6247.3.1.1.1.2.2.5 | ScalarcbClNumPacketsDiscarded | read-only | mandatory | Number of packets discarded to IP==cbClientIP in the last cbClNumSeconds seconds. |
| 1.3.6.1.4.1.6247.3.1.1.1.2.2.6 | ScalarcbClStatReset | write-only | mandatory | Set ot non-zero - Reset the statistics values for the client cbClientIP. |
| 1.3.6.1.4.1.6247.3.1.1.1.2.2.7 | ScalarcbClEncrEnbled | read-only | mandatory | If this variable is True then the user desire encryption. This value may not changed and it is NOT changed by setting cbClStatReset. |
| 1.3.6.1.4.1.6247.3.1.1.1.3 | NodecbStatClTable | |||
| 1.3.6.1.4.1.6247.3.1.1.1.3.1 | TablecbClTable | not-accessible | mandatory | This table contains updated statistics of all clients known to the gateway. |
| 1.3.6.1.4.1.6247.3.1.1.1.3.1.1 | RowcbClTableNode | not-accessible | mandatory | Information about a particular client. |
| 1.3.6.1.4.1.6247.3.1.1.1.3.1.1.1 | ColumncbClTableIP | read-only | mandatory | The clients IP. |
| 1.3.6.1.4.1.6247.3.1.1.1.3.1.1.2 | ColumncbClTableStampTime | read-only | mandatory | The clients Stamp Time. |
| 1.3.6.1.4.1.6247.3.1.1.1.3.1.1.3 | ColumncbClTableStartTime | read-only | mandatory | The clients Start Time. |
| 1.3.6.1.4.1.6247.3.1.1.1.3.1.1.4 | ColumncbClTableTotalPackets | read-only | mandatory | Total Packets transmitted to this client. |
| 1.3.6.1.4.1.6247.3.1.1.1.3.1.1.5 | ColumncbClTableBytesInSec | read-only | mandatory | The clients Rate in Bytes/Sec. |
| 1.3.6.1.4.1.6247.3.1.1.1.3.1.1.6 | ColumncbClTablePacketsDiscr | read-only | mandatory | The Total Packets which were discarded to this client |
| 1.3.6.1.4.1.6247.3.1.1.1.3.1.1.7 | ColumncbClTableKBytesTxed | read-only | mandatory | The Total KBytes transmitted to this client. |
| 1.3.6.1.4.1.6247.3.1.1.1.3.1.1.8 | ColumncbClTableReset | read-write | mandatory | Reset the client statistics. |
| 1.3.6.1.4.1.6247.3.1.1.2 | NodecbConfig | |||
| 1.3.6.1.4.1.6247.3.1.1.2.1 | NodecbNetworkParam | |||
| 1.3.6.1.4.1.6247.3.1.1.2.1.1 | ScalarcbNetGatewayMngIP | read-only | mandatory | C&M IP Address. Changing this parameter will affect after system reset. |
| 1.3.6.1.4.1.6247.3.1.1.2.1.2 | ScalarcbNetGatewayMngSubnetMask | read-only | mandatory | C&M subnet mask. Changing this parameter will affect after system reset. |
| 1.3.6.1.4.1.6247.3.1.1.2.1.3 | ScalarcbNetDefaultGateway | read-write | mandatory | The default gateway IP Address. The term gateway here, is reffering to another station in the same LAN of the CATV-Gateway. All IP packets that the CATV-Gatewa… |
| 1.3.6.1.4.1.6247.3.1.1.2.1.4 | ScalarcbNetPromiscuous | read-write | mandatory | Enables/Disables Promiscuous Mode. Changing this parameter will affect after system reset. |
| 1.3.6.1.4.1.6247.3.1.1.2.1.5 | ScalarcbNetUnregisteredUsers | read-write | mandatory | Enables/Disables Unregistered Users. |
| 1.3.6.1.4.1.6247.3.1.1.2.1.6 | ScalarcbNetMulticast | read-write | mandatory | Enables/Disables receive Multicast Packets. |
| 1.3.6.1.4.1.6247.3.1.1.2.1.7 | ScalarcbNetDualNIC | read-write | mandatory | Enables/Disables Transportation NIC Changing this parameter will affect after system reset. |
| 1.3.6.1.4.1.6247.3.1.1.2.1.8 | ScalarcbNetGatewayDataIP | read-write | mandatory | Transportation IP Address. Changing this parameter will affect after system reset. |
| 1.3.6.1.4.1.6247.3.1.1.2.1.9 | ScalarcbNetGatewayDataSubnetMask | read-write | mandatory | Transportation subnet mask. Changing this parameter will affect after system reset. |
| 1.3.6.1.4.1.6247.3.1.1.2.1.10 | ScalarcbNetTelnet | read-write | mandatory | Enables/Disables the Telnet Server |
| 1.3.6.1.4.1.6247.3.1.1.2.1.11 | ScalarcbNetFTP | read-write | mandatory | Enables/Disables the FTP Server |
| 1.3.6.1.4.1.6247.3.1.1.2.2 | NodecbDVBOutputParam | |||
| 1.3.6.1.4.1.6247.3.1.1.2.2.1 | ScalarcbDVBOutputBitRate | read-write | mandatory | PLL Frequency |
| 1.3.6.1.4.1.6247.3.1.1.2.2.2 | ScalarcbDVBPAT | read-write | mandatory | PAT Rate |
| 1.3.6.1.4.1.6247.3.1.1.2.2.3 | ScalarcbDVBPMT | read-write | mandatory | PMT Rate |
| 1.3.6.1.4.1.6247.3.1.1.2.2.4 | ScalarcbDVBFraming | read-write | mandatory | 188/204 Framing. |
| 1.3.6.1.4.1.6247.3.1.1.2.2.5 | ScalarcbStuffingMode | read-write | mandatory | Stuffing mode: either FF stuffing or Adaptation field stuffing |
| 1.3.6.1.4.1.6247.3.1.1.2.2.6 | ScalarcbMpeMode | read-write | mandatory | MPE mode: Packed MPE mode or Not packed MPE mode. |
| 1.3.6.1.4.1.6247.3.1.1.2.2.7 | ScalarcbCRCMode | read-write | mandatory | CRC type |
| 1.3.6.1.4.1.6247.3.1.1.2.2.8 | ScalarcbDVBClockPolarity | read-only | mandatory | DVB Clock Polarity. (read only value - may be changed in CFG.INI only). |
| 1.3.6.1.4.1.6247.3.1.1.2.2.9 | ScalarcbDVBAuxInput | read-write | mandatory | Aux Input Enable |
| 1.3.6.1.4.1.6247.3.1.1.2.2.10 | ScalarcbDVBAuxNullPackets | read-write | mandatory | Aux Null Packets |
| 1.3.6.1.4.1.6247.3.1.1.2.2.11 | ScalarcbDVBAuxInputType | read-write | mandatory | Aux Input Type |
| 1.3.6.1.4.1.6247.3.1.1.2.2.12 | ScalarcbDVBLlcSnap | read-write | mandatory | Enable LLC-SNAP in MPE |
| 1.3.6.1.4.1.6247.3.1.1.2.3 | NodecbGeneralParam | |||
| 1.3.6.1.4.1.6247.3.1.1.2.3.1 | ScalarcbGatewayEnabled | read-write | mandatory | Enables/Disables all the Gateway operations. |
| 1.3.6.1.4.1.6247.3.1.1.2.3.2 | ScalarcbGatewaySWReset | write-only | mandatory | CAUTION: Setting this param to cbTrue cause a S/W reset of the gateway. |
| 1.3.6.1.4.1.6247.3.1.1.2.3.3 | NodecbTraceInfo | |||
| 1.3.6.1.4.1.6247.3.1.1.2.3.3.1 | ScalarcbTraceMask | read-write | mandatory | Mask to select elements for trace. |
| 1.3.6.1.4.1.6247.3.1.1.2.3.3.2 | ScalarcbTraceLevel | read-write | mandatory | Trace level for elements specified by cbTraceMask |
| 1.3.6.1.4.1.6247.3.1.1.2.3.3.3 | ScalarcbTraceOutputChannel | read-write | mandatory | Trace output channel. |
| 1.3.6.1.4.1.6247.3.1.1.2.3.4 | ScalarcbPktEncrypt | read-write | mandatory | Enable/Disable encryption of the the transmitted packets. If cbPktEncrypt==cbTrue, packets will be encrypted only if cbClEncrEnable==cbTrue for that client. |
| 1.3.6.1.4.1.6247.3.1.1.2.3.5 | ScalarcbGatewayDescription | read-write | mandatory | A general description of this gateway. The description may be changed as needed. |
| 1.3.6.1.4.1.6247.3.1.1.2.3.6 | ScalarcbSWVersion | read-only | mandatory | TV Gateway Software Version. |
| 1.3.6.1.4.1.6247.3.1.1.2.3.7 | ScalarcbApplicationFileName | read-write | mandatory | TV Gateway Application Software File Name. Changing this parameter will affect after system reset. |
| 1.3.6.1.4.1.6247.3.1.1.2.3.8 | ScalarcbDataMappingMode | read-write | mandatory | Data Boradcast Mode - Encodding mode of data from network. |
| 1.3.6.1.4.1.6247.3.1.1.2.3.9 | ScalarcbMaxAllowableDelay | read-write | mandatory | The Maximum allowable time (in mSec) which a packet can be delayed in the gateway. |
| 1.3.6.1.4.1.6247.3.1.1.2.3.10 | NodecbQualityOfService | |||
| 1.3.6.1.4.1.6247.3.1.1.2.3.10.1 | ScalarcbQOSMode | read-write | mandatory | Permissive mode will allow transmit to users obove their maximum rate when when band-width is available. Restrictive mode will not transmit any data to users a… |
| 1.3.6.1.4.1.6247.3.1.1.2.3.10.2 | ScalarcbQOSActive | read-write | mandatory | Turn on (cbTrue) or off (cbFalse) the Quality of Service mechanism. When Quality of Service is turned off, the minimum CIR promised to users is ignored and dat… |
| 1.3.6.1.4.1.6247.3.1.1.2.3.11 | ScalarcbFlushing | read-write | mandatory | Flushing packets on IDLE |
| 1.3.6.1.4.1.6247.3.1.1.2.3.13 | ScalarcbFPGAFileName | read-write | mandatory | A string that holds the MCS file name loaded to the Gateway's Encoder. Changing this parameter will affect after system reset. |
| 1.3.6.1.4.1.6247.3.1.1.2.4 | NodecbGroupsTable | |||
| 1.3.6.1.4.1.6247.3.1.1.2.4.1 | TablecbGrTable | not-accessible | mandatory | This table contains the Groups definitions. |
| 1.3.6.1.4.1.6247.3.1.1.2.4.1.1 | RowcbGroupsTableNode | not-accessible | mandatory | Information about a particular group. |
| 1.3.6.1.4.1.6247.3.1.1.2.4.1.1.1 | ColumncbGrTableIndex | read-write | mandatory | Group Index. |
| 1.3.6.1.4.1.6247.3.1.1.2.4.1.1.2 | ColumncbGrTablePID | read-write | mandatory | The Group PID. |
| 1.3.6.1.4.1.6247.3.1.1.2.4.1.1.3 | ColumncbGrTableQosMode | read-write | mandatory | The Group Qos Mode. |
| 1.3.6.1.4.1.6247.3.1.1.2.4.1.1.4 | ColumncbGrTableMinRate | read-write | mandatory | The Group Minimum rate. This parameter affects only if QosMode=Global |
| 1.3.6.1.4.1.6247.3.1.1.2.4.1.1.5 | ColumncbGrTableMaxRate | read-write | mandatory | The Group Maximum rate. This parameter affects only if QosMode=Global |
| 1.3.6.1.4.1.6247.3.1.1.2.5 | NodecbConfigSTUTable | |||
| 1.3.6.1.4.1.6247.3.1.1.2.5.1 | TablecbStaticUserTable | not-accessible | mandatory | This table contains the all the static users. |
| 1.3.6.1.4.1.6247.3.1.1.2.5.1.1 | RowcbStaticUserEntry | not-accessible | mandatory | Information about a particular static user. |
| 1.3.6.1.4.1.6247.3.1.1.2.5.1.1.1 | ColumncbStaticUserIP | read-write | mandatory | IP of static user. |
| 1.3.6.1.4.1.6247.3.1.1.2.5.1.1.2 | ColumncbStaticUserMask | read-write | mandatory | The static user mask. |
| 1.3.6.1.4.1.6247.3.1.1.2.5.1.1.3 | ColumncbStaticUserGroup | read-write | mandatory | The static user's Group. |
| 1.3.6.1.4.1.6247.3.1.1.2.5.1.1.4 | ColumncbStaticUserMAC | read-write | mandatory | The group in which the static user resides. |
| 1.3.6.1.4.1.6247.3.1.1.2.5.1.1.5 | ColumncbStaticUserMinRate | read-write | mandatory | The static user Minimum rate (CIR). |
| 1.3.6.1.4.1.6247.3.1.1.2.5.1.1.6 | ColumncbStaticUserMaxRate | read-write | mandatory | The static user Maximum rate. |
| 1.3.6.1.4.1.6247.3.1.1.2.6 | NodecbConfigMulticastTable | |||
| 1.3.6.1.4.1.6247.3.1.1.2.6.1 | TablecbMulticastTable | not-accessible | mandatory | This table contains the all the multicasts. |
| 1.3.6.1.4.1.6247.3.1.1.2.6.1.1 | RowcbMulticastEntry | not-accessible | mandatory | Information about a particular multicast. |
| 1.3.6.1.4.1.6247.3.1.1.2.6.1.1.1 | ColumncbMulticastIP | read-write | mandatory | IP of multicast. |
| 1.3.6.1.4.1.6247.3.1.1.2.6.1.1.2 | ColumncbMulticastGroup | read-write | mandatory | The multicast's Group. |
| 1.3.6.1.4.1.6247.3.1.1.2.6.1.1.3 | ColumncbMulticastSID | read-write | mandatory | The group in which the multicast resides. |
| 1.3.6.1.4.1.6247.3.1.1.2.6.1.1.4 | ColumncbMulticastMinRate | read-write | mandatory | The multicast Minimum rate (CIR). |
| 1.3.6.1.4.1.6247.3.1.1.2.6.1.1.5 | ColumncbMulticastMaxRate | read-write | mandatory | The multicast Maximum rate. |
| 1.3.6.1.4.1.6247.3.1.1.2.7 | NodecbConfigClTable | |||
| 1.3.6.1.4.1.6247.3.1.1.2.7.1 | TablecbCfgClTable | not-accessible | mandatory | This table contains updated configuration of all clients known to the gateway. |
| 1.3.6.1.4.1.6247.3.1.1.2.7.1.1 | RowcbCfgClTableNode | not-accessible | mandatory | Information about a particular client configuration. |
| 1.3.6.1.4.1.6247.3.1.1.2.7.1.1.1 | ColumncbCfgClTableIP | read-only | mandatory | The clients IP. |
| 1.3.6.1.4.1.6247.3.1.1.2.7.1.1.2 | ColumncbCfgClTableMask | read-only | mandatory | The clients IP Mask. |
| 1.3.6.1.4.1.6247.3.1.1.2.7.1.1.3 | ColumncbCfgClTableMAC | read-only | mandatory | The clients MAC Address. |
| 1.3.6.1.4.1.6247.3.1.1.2.7.1.1.4 | ColumncbCfgClTableGroup | read-only | mandatory | The clients Group. |
| 1.3.6.1.4.1.6247.3.1.1.2.7.1.1.5 | ColumncbCfgClTableBy | read-only | mandatory | By whom the client was added. |
| 1.3.6.1.4.1.6247.3.1.1.2.7.1.1.6 | ColumncbCfgClTableMinRate | read-only | mandatory | The clients Minimum rate (CIR). |
| 1.3.6.1.4.1.6247.3.1.1.2.7.1.1.7 | ColumncbCfgClTableMaxRate | read-only | mandatory | The clients Maximum rate. |
| 1.3.6.1.4.1.6247.3.1.1.2.7.1.1.8 | ColumncbCfgClTableEncrypt | read-only | mandatory | The clients Encryption parameter True/False. |
| 1.3.6.1.4.1.6247.3.1.1.2.8 | NodecbTimeDate | |||
| 1.3.6.1.4.1.6247.3.1.1.2.8.1 | ScalarcbTime | read-write | mandatory | A string in the form HH:MM:SS that represents the gateway idea of the current time. Single digits should be preceeded by 0. Examples: 12:35:27 01:50:00 09:01:59 |
| 1.3.6.1.4.1.6247.3.1.1.2.8.2 | ScalarcbDate | read-write | mandatory | A string representing the gateway idea of the current date. In order to set a different date, use the following format: <Full Month Name> <1 or 2 Digits of Day… |
| 1.3.6.1.4.1.6247.3.1.1.2.9 | ScalarcbClientsInfoReset | read-write | mandatory | This parameter is applicable only for clients that were NOT added by the CCU. The gateway will delete from its lists clients information (statistics and encryp… |
| 1.3.6.1.4.1.6247.3.1.1.2.10 | NodecbCCUParam | |||
| 1.3.6.1.4.1.6247.3.1.1.2.10.1 | ScalarcbCCU1 | read-write | mandatory | IP of CCU Server #1 (set to 0.0.0.0 to disable CCU #1) |
| 1.3.6.1.4.1.6247.3.1.1.2.10.2 | ScalarcbCCU2 | read-write | mandatory | IP of CCU Server #2 (set to 0.0.0.0 to disable CCU #2) |
| 1.3.6.1.4.1.6247.3.1.1.2.10.3 | ScalarcbCCU3 | read-write | mandatory | IP of CCU Server #3 (set to 0.0.0.0 to disable CCU #3) |
| 1.3.6.1.4.1.6247.3.1.1.2.10.4 | ScalarcbCCU4 | read-write | mandatory | IP of CCU Server #4 (set to 0.0.0.0 to disable CCU #4) |
| 1.3.6.1.4.1.6247.3.1.1.2.10.5 | ScalarcbCCU5 | read-write | mandatory | IP of CCU Server #5 (set to 0.0.0.0 to disable CCU #5) |
| 1.3.6.1.4.1.6247.3.1.1.2.10.6 | ScalarcbCCU6 | read-write | mandatory | IP of CCU Server #6 (set to 0.0.0.0 to disable CCU #6) |
| 1.3.6.1.4.1.6247.3.1.1.2.10.7 | ScalarcbCCU7 | read-write | mandatory | IP of CCU Server #7 (set to 0.0.0.0 to disable CCU #7) |
| 1.3.6.1.4.1.6247.3.1.1.2.10.8 | ScalarcbCCU8 | read-write | mandatory | IP of CCU Server #8 (set to 0.0.0.0 to disable CCU #8) |
| 1.3.6.1.4.1.6247.3.1.1.2.10.9 | ScalarcbCCU9 | read-write | mandatory | IP of CCU Server #9 (set to 0.0.0.0 to disable CCU #9) |
| 1.3.6.1.4.1.6247.3.1.1.2.10.10 | ScalarcbCCU10 | read-write | mandatory | IP of CCU Server #10 (set to 0.0.0.0 to disable CCU #10) |
| 1.3.6.1.4.1.6247.3.1.1.2.11 | NodecbHASParam | |||
| 1.3.6.1.4.1.6247.3.1.1.2.11.1 | ScalarcbHasEnable | read-write | mandatory | Enables/Disables High Availability Mode. |
| 1.3.6.1.4.1.6247.3.1.1.2.11.2 | ScalarcbHasCpu | read-write | mandatory | Maximum CPU |
| 1.3.6.1.4.1.6247.3.1.1.2.11.3 | ScalarcbHasMemory | read-write | mandatory | Maximum Memory Usage |
| 1.3.6.1.4.1.6247.3.1.1.3 | NodecbDiagnostics | |||
| 1.3.6.1.4.1.6247.3.1.1.3.1 | NodecbDiagTestTx | |||
| 1.3.6.1.4.1.6247.3.1.1.3.1.1 | NodecbDiagTestTxParam | |||
| 1.3.6.1.4.1.6247.3.1.1.3.1.1.1 | ScalarcbTestTxDestIP | read-write | mandatory | Test Transfer Packet ID |
| 1.3.6.1.4.1.6247.3.1.1.3.1.1.2 | ScalarcbTestTxType | read-write | mandatory | READ/WRITE Test Transfer Type: cbTestTypeOnePacket - one packet, cbTestTypeLowSpeedCont - Low Speed Continuous. cbTestTypeHighSpeedCont - High Speed Continuous. |
| 1.3.6.1.4.1.6247.3.1.1.3.1.2 | ScalarcbDiagTestTxActive | read-write | mandatory | Set to 0 in order to stop Test Transfer. Set to non-0 in order to activate it. (in case cbTestTxType = 1, set to 0 and to non-zero in order to re-send the sing… |
| 1.3.6.1.4.1.6247.3.1.1.4 | NodecbSWDownload | |||
| 1.3.6.1.4.1.6247.3.1.1.4.1 | ScalarcbSWServerIP | read-write | mandatory | The TFTP server IP address. The S/W file will be TFTPed from this station. Use 0.0.0.0 to load a different local file (without TFTP). |
| 1.3.6.1.4.1.6247.3.1.1.4.2 | NodecbAppDownload | |||
| 1.3.6.1.4.1.6247.3.1.1.4.2.1 | ScalarcbSWSourceFileName | read-write | mandatory | The software file name and its optional path (relative to the TFTP server root definition) to be downloaded from the server. Example: catvgw.dat |
| 1.3.6.1.4.1.6247.3.1.1.4.2.2 | ScalarcbSWTargetFileName | read-write | mandatory | The S/W file name (without path) on the Gateway. Example: ram.abs WARNING: cbApplicationFileName (under cbGeneralParam) is the name of the running S/W. If cbSW… |
| 1.3.6.1.4.1.6247.3.1.1.4.2.3 | ScalarcbSWDownloadStart | write-only | mandatory | Set cbSWDownloadStart to cbTrue in order to start the S/W download process. Set cbSWDownloadStart to cbFalse to interrupt (and stop) S/W download in progress (… |
| 1.3.6.1.4.1.6247.3.1.1.4.2.4 | ScalarcbSWDownloadStatus | read-only | mandatory | Status of SW Download: cbIdle - Download has not started yet or has comleted and gateway already restarted with new version (not an error). cbDownloadInProgres… |
| 1.3.6.1.4.1.6247.3.1.1.4.3 | NodecbFPGADownload | |||
| 1.3.6.1.4.1.6247.3.1.1.4.3.1 | ScalarcbFPGASourceFileName | read-write | mandatory | The FPGA file name and its optional path (relative to the TFTP server root definition) to be downloaded from the server. Example: FPGA.DAT |
| 1.3.6.1.4.1.6247.3.1.1.4.3.2 | ScalarcbFPGATargetFileName | read-write | mandatory | The FPGA file name (without path) on the Gateway. Example: FPGA.DAT |
| 1.3.6.1.4.1.6247.3.1.1.4.3.3 | ScalarcbFPGADownloadStart | write-only | mandatory | Set cbFPGADownloadStart to cbTrue in order to start the FPGA download process. Set cbFPGADownloadStart to cbFalse to interrupt (and stop) FPGA download in prog… |
| 1.3.6.1.4.1.6247.3.1.1.4.3.4 | ScalarcbFPGADownloadStatus | read-only | mandatory | Status of FPGA Download: cbIdle - Download has not started yet or has comleted and gateway already restarted with new version (not an error). cbDownloadInProgr… |