EFDATA-SPECTRACAST-DR5000-MIB
85 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6247 | Nodeefdata | |||
| 1.3.6.1.4.1.6247.3 | Nodespectracast | |||
| 1.3.6.1.4.1.6247.3.2 | Nodedr5000 | |||
| 1.3.6.1.4.1.6247.3.2.1 | Nodegeneral | |||
| 1.3.6.1.4.1.6247.3.2.1.1 | ScalarsoftwareVersion | read-only | mandatory | Software Version (read only). |
| 1.3.6.1.4.1.6247.3.2.1.2 | ScalarhardwareVersion | read-only | mandatory | Hardware Version (read only). |
| 1.3.6.1.4.1.6247.3.2.1.3 | ScalarmacAddress | read-only | mandatory | MAC address (read only). |
| 1.3.6.1.4.1.6247.3.2.1.4 | ScalarmulticastRoutingStatus | read-only | mandatory | Multicast routing status (read only). |
| 1.3.6.1.4.1.6247.3.2.2 | Noderfparameters | |||
| 1.3.6.1.4.1.6247.3.2.2.1 | Scalarrf-Input | read-write | mandatory | RF Input frequency (MHz) (read-write). |
| 1.3.6.1.4.1.6247.3.2.2.2 | Scalarlnb-Frequency | read-write | mandatory | LNB frequency (GHz) (read-write). |
| 1.3.6.1.4.1.6247.3.2.2.3 | ScalarsymbolRate | read-write | mandatory | Symbol rate (Msps) (read-write). |
| 1.3.6.1.4.1.6247.3.2.2.4 | Scalarpolarity | read-write | mandatory | Polarity may take values: Disabled(0), Vertical(14) or Horizontal(18) (read-write). |
| 1.3.6.1.4.1.6247.3.2.2.5 | ScalarfrequencyRange | read-write | mandatory | Frequency range may take values: Low(0) or High(1) (read-write). |
| 1.3.6.1.4.1.6247.3.2.3 | Nodedvbparameters | |||
| 1.3.6.1.4.1.6247.3.2.3.1 | Scalarpids-number | read-only | mandatory | Number of PIDs in the list (read only). |
| 1.3.6.1.4.1.6247.3.2.3.2 | TablepidTable | not-accessible | mandatory | List of PID entries. The number of entries is given by PIDs-number value. |
| 1.3.6.1.4.1.6247.3.2.3.2.1 | RowpidEntry | not-accessible | mandatory | PID entry containing objects for the particular PID. |
| 1.3.6.1.4.1.6247.3.2.3.2.1.1 | Columnpidindex | read-only | mandatory | Unique ID for each PID, ranges between 1 and PIDs-number (read-only). |
| 1.3.6.1.4.1.6247.3.2.3.2.1.2 | Columnpidvalue | read-write | mandatory | Unique PID value (read-write). |
| 1.3.6.1.4.1.6247.3.2.4 | Nodeccuparameters | |||
| 1.3.6.1.4.1.6247.3.2.4.1 | ScalarccuConnectionMode | read-write | mandatory | CCU connection mode, may take values: Manual(0), Duplex(1) or Simplex(2) (read-write). |
| 1.3.6.1.4.1.6247.3.2.4.2 | ScalarccuIpAddress | read-write | mandatory | CCU IP Address (read-write). |
| 1.3.6.1.4.1.6247.3.2.4.3 | ScalarccuUserName | write-only | mandatory | User name for connecting to the CCU (write only). |
| 1.3.6.1.4.1.6247.3.2.4.4 | ScalarccuPassword | write-only | mandatory | Password for connecting to the CCU (write only). |
| 1.3.6.1.4.1.6247.3.2.4.5 | ScalarencryptedMulticast | read-write | mandatory | Set to Enabled in order to receive encrypted multicast. |
| 1.3.6.1.4.1.6247.3.2.5 | Nodedialupparameters | |||
| 1.3.6.1.4.1.6247.3.2.5.1 | ScalarconnectionMode | read-write | mandatory | Connection Mode, may take values: Manual(0) or Automatic(1) (read-write). |
| 1.3.6.1.4.1.6247.3.2.5.2 | ScalarphoneNumber | read-write | mandatory | ISP Phone number, accepts only digits (read-write). |
| 1.3.6.1.4.1.6247.3.2.5.3 | ScalaruserName | write-only | mandatory | User name for dialup connection (write only). |
| 1.3.6.1.4.1.6247.3.2.5.4 | Scalarpassword | write-only | mandatory | Password for dialup connection (write only). |
| 1.3.6.1.4.1.6247.3.2.5.5 | ScalardialTone | read-write | mandatory | Dialing mode, may take values: Tone(0)) or Pulse(1) (read-write). |
| 1.3.6.1.4.1.6247.3.2.5.7 | Scalarspeed | read-write | mandatory | Modem connection speed, may take values: 9600, 19200, 38400, 57600 or 115200 (read-write). |
| 1.3.6.1.4.1.6247.3.2.5.8 | ScalaridleTimeOut | read-write | mandatory | Dial on demand time out in minutes. Set to 0 in order to disable dial on demand (read-write). |
| 1.3.6.1.4.1.6247.3.2.5.9 | Scalarauthentication | read-write | mandatory | Authentication mode, may take values: PAP or CHAP (read-write). |
| 1.3.6.1.4.1.6247.3.2.6 | Nodestatus | |||
| 1.3.6.1.4.1.6247.3.2.6.1 | ScalarinitializationStatus | read-only | mandatory | Card initialization status (read only). |
| 1.3.6.1.4.1.6247.3.2.6.2 | ScalardemodulatorStatus | read-only | mandatory | Current demodulator status (read only). |
| 1.3.6.1.4.1.6247.3.2.6.3 | ScalarspectralInversion | read-only | mandatory | Spectral inversion (read only). |
| 1.3.6.1.4.1.6247.3.2.6.4 | Scalarber-before-Err-Correction | read-only | mandatory | BER before error correction (read only). |
| 1.3.6.1.4.1.6247.3.2.6.5 | Scalarfec | read-only | mandatory | FEC (read only). |
| 1.3.6.1.4.1.6247.3.2.6.6 | Scalaragc | read-only | mandatory | Gain value set by AGC (Db) (read only). |
| 1.3.6.1.4.1.6247.3.2.6.7 | ScalarfrequencyOffset | read-only | mandatory | Frequency offset (read only). |
| 1.3.6.1.4.1.6247.3.2.6.8 | Scalareb-N0 | read-only | mandatory | Eb/N0 (read only). |
| 1.3.6.1.4.1.6247.3.2.6.9 | Scalarccu-connection-status | read-only | mandatory | CCU connection status, may take values Disconnected(0), Connected(1), Trying to Connect(2), Waiting for Dialup(3), or Waiting for RF Lock(4) (read only). |
| 1.3.6.1.4.1.6247.3.2.6.10 | Scalardialup-connection-status | read-only | mandatory | Dialup connection status, may take values Disconnected(0), Connected(1), Trying to Connect(2) or Idle(10) (read only). |
| 1.3.6.1.4.1.6247.3.2.7 | NodeflowStatistics | |||
| 1.3.6.1.4.1.6247.3.2.7.1 | ScalartotalThroughput | read-only | mandatory | Total throughput in bytes/sec. (read only). |
| 1.3.6.1.4.1.6247.3.2.7.2 | ScalarunicastThroughput | read-only | mandatory | Unicast throughput in bytes/sec. (read only). |
| 1.3.6.1.4.1.6247.3.2.7.3 | ScalarmulticastThroughput | read-only | mandatory | Multicast throughput in bytes/sec. (read only). |
| 1.3.6.1.4.1.6247.3.2.7.4 | ScalartotalPackets | read-only | mandatory | Total packets received since reset (read only). |
| 1.3.6.1.4.1.6247.3.2.7.5 | ScalarbadPackets | read-only | mandatory | Bad RS packets (read only). |
| 1.3.6.1.4.1.6247.3.2.7.6 | ScalarcorrectedPackets | read-only | mandatory | Corrected RS packets (read only). |
| 1.3.6.1.4.1.6247.3.2.7.7 | ScalarresetFlowStatistics | read-write | mandatory | Set to True in order to reset flow statistics. |
| 1.3.6.1.4.1.6247.3.2.8 | Nodemaintenance | |||
| 1.3.6.1.4.1.6247.3.2.8.1 | ScalardriverRestart | read-write | mandatory | Set to True in order to restart the Driver. |
| 1.3.6.1.4.1.6247.3.2.8.2 | ScalardialupConnect | read-write | mandatory | Set to True in order to dial your ISP. |
| 1.3.6.1.4.1.6247.3.2.8.3 | ScalardialupDisconnect | read-write | mandatory | Set to true in order to disconnect from your ISP. |
| 1.3.6.1.4.1.6247.3.2.8.4 | Scalarccuconnect | read-write | mandatory | Set to True in order to connect to the CCU. |
| 1.3.6.1.4.1.6247.3.2.8.5 | Scalarccudisconnect | read-write | mandatory | Set to True in order to disconnect from the CCU. |
| 1.3.6.1.4.1.6247.3.2.8.6 | Scalarupgrade | write-only | mandatory | Set to the upgrade file name, and upgrade the system. After upgrade finishes the system reboots automatically (write only). |
| 1.3.6.1.4.1.6247.3.2.9 | NodesnmpVariables | |||
| 1.3.6.1.4.1.6247.3.2.9.1 | ScalarenableTraps | read-write | mandatory | Set to True in order to start getting traps. |
| 1.3.6.1.4.1.6247.3.2.9.2 | ScalarsnmpManagerIP | read-write | mandatory | IP address of SNMP manager where traps have to be sent to (read-write). |
| 1.3.6.1.4.1.6247.3.2.9.3 | ScalartrapPeriod | read-write | mandatory | Trap sending period in seconds (read-write). |
| 1.3.6.1.4.1.6247.3.2.9.4 | NodetrapList | |||
| 1.3.6.1.4.1.6247.3.2.9.4.1 | NodemulticastDaemon | |||
| 1.3.6.1.4.1.6247.3.2.9.4.1.1 | ScalarmulticastTrapEnable | read-write | mandatory | Use multicast daemon status trap. A trap message is sent when multicast daemon goes down (read-write). |
| 1.3.6.1.4.1.6247.3.2.9.4.2 | Nodedemodulator | |||
| 1.3.6.1.4.1.6247.3.2.9.4.2.1 | ScalardemodulatorTrapEnable | read-write | mandatory | Use demodulator status trap. A trap message is sent when the demodulator loses data lock (read-write). |
| 1.3.6.1.4.1.6247.3.2.9.4.3 | NodeccuConnection | |||
| 1.3.6.1.4.1.6247.3.2.9.4.3.1 | ScalarccuTrapEnable | read-write | mandatory | Use CCU connection status trap. A trap message is sent when CCU status changes from Connected to any other one (read-write). |
| 1.3.6.1.4.1.6247.3.2.9.4.4 | Nodedialup | |||
| 1.3.6.1.4.1.6247.3.2.9.4.4.1 | ScalardialupTrapEnable | read-write | mandatory | Use dialup connection status trap. A trap message is sent when dialup status changes from Connected to any other one except Idle (read-write). |
| 1.3.6.1.4.1.6247.3.2.9.4.5 | NodeberLevel | |||
| 1.3.6.1.4.1.6247.3.2.9.4.5.1 | ScalarberTrapEnable | read-write | mandatory | Use BER level trap. A trap message is sent when BER value is greater then BER trap threshold (read-write). |
| 1.3.6.1.4.1.6247.3.2.9.4.5.2 | ScalarberThreshold | read-write | mandatory | BER level threshold value (read-write). |
| 1.3.6.1.4.1.6247.3.2.9.4.6 | NodefreqOffset | |||
| 1.3.6.1.4.1.6247.3.2.9.4.6.1 | ScalarfreqOffsetTrapEnable | read-write | mandatory | Use frequency offset trap. A trap message is sent when absolute frequency offset is greater then frequency offset trap threshold (read-write). |
| 1.3.6.1.4.1.6247.3.2.9.4.6.2 | ScalarfreqOffsetThreshold | read-write | mandatory | Frequency offset threshold value (read-write). |
| 1.3.6.1.4.1.6247.3.2.9.4.7 | NodeagcLevel | |||
| 1.3.6.1.4.1.6247.3.2.9.4.7.1 | ScalaragcTrapEnable | read-write | mandatory | Use AGC level trap. A trap message is sent when gain value is greater then AGC trap threshold (read-write). |
| 1.3.6.1.4.1.6247.3.2.9.4.7.2 | ScalaragcThreshold | read-write | mandatory | AGC threshold value (read-write) |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| FLAG | INTEGER { on(1), off(2) } | ||
| MPEG-PID-mode | INTEGER { manual(1), automatic(2) } |