EICON-MIB-ROUTER

206 objects

No module-level DESCRIPTION found.

Imported Objects

RFC-1212	OBJECT-TYPE
RFC-1215	TRAP-TYPE
RFC1155-SMI	Counter enterprises Gauge IpAddress TimeTicks
RFC1213-MIB	DisplayString

OID	Name	Access	Status	Description
1.3.6.1.4.1.434	Nodeeicon
1.3.6.1.4.1.434.2	Nodemanagement
1.3.6.1.4.1.434.2.2	Nodemibv2
1.3.6.1.4.1.434.2.2.4	Nodemodule
1.3.6.1.4.1.434.2.2.8	Noderouter
1.3.6.1.4.1.434.2.2.8.1	ScalarrtName	read-only	mandatory	The name advertised by the router agent using SAP.
1.3.6.1.4.1.434.2.2.8.2	ScalarrtProductName	read-only	mandatory	The Product name ie. Router for Netware.
1.3.6.1.4.1.434.2.2.8.3	ScalarrtReleaseVersion	read-only	mandatory	Ex.: Ver. 3 Rel. 2.
1.3.6.1.4.1.434.2.2.8.4	ScalarrtReleaseDate	read-only	mandatory	Format: 1993/03/25.
1.3.6.1.4.1.434.2.2.8.5	ScalarrtOperState	read-only	mandatory	The operational state of the router.
1.3.6.1.4.1.434.2.2.8.6	ScalarrtAdminStateCtr	read-write	mandatory	The administrative state of the router. Management station will change this value to start or stop the router.
1.3.6.1.4.1.434.2.2.8.7	ScalarrtType	read-only	mandatory	Type of router.
1.3.6.1.4.1.434.2.2.8.8	ScalarrtTimeUp	read-only	mandatory	The time elapsed since the router was started.
1.3.6.1.4.1.434.2.2.8.9	ScalarrtNumberOfPorts	read-only	mandatory	The number of Eicon ports currently used by the router.
1.3.6.1.4.1.434.2.2.8.10	ScalarrtMaxCircuits	read-only	mandatory	The maximum number of connections that can be configured for this router.
1.3.6.1.4.1.434.2.2.8.11	ScalarrtAvailableCircuits	read-only	mandatory	The number of connections still available for this router.
1.3.6.1.4.1.434.2.2.8.12	ScalarrtAvailableLANMapping	read-only	mandatory	The available number of LAN protocol mappings for all connections.
1.3.6.1.4.1.434.2.2.8.13	ScalarrtMaxLANMapping	read-only	mandatory	The maximum number of LAN protocol mappings for all connections.
1.3.6.1.4.1.434.2.2.8.14	ScalarrtGlobalTxPackets	read-only	mandatory	The number of packets transmitted by the router on all ports
1.3.6.1.4.1.434.2.2.8.15	ScalarrtGlobalTxBytesLow	read-only	mandatory	The number of bytes transmitted by the router on all ports - the low 32 bits of the 64 bits counter.
1.3.6.1.4.1.434.2.2.8.16	ScalarrtGlobalTxBytesHigh	read-only	mandatory	The number of bytes transmitted by the router on all ports - the high 32 bits of the 64 bits counter.
1.3.6.1.4.1.434.2.2.8.17	ScalarrtGlobalRxPackets	read-only	mandatory	The number of packets received by the router on all ports
1.3.6.1.4.1.434.2.2.8.18	ScalarrtGlobalRxBytesLow	read-only	mandatory	The number of bytes received by the router on all ports - the low 32 bits of the 64 bits counter.
1.3.6.1.4.1.434.2.2.8.19	ScalarrtGlobalRxBytesHigh	read-only	mandatory	The number of bytes received by the router on all ports - the high 32 bits of the 64 bits counter.
1.3.6.1.4.1.434.2.2.8.20	ScalarrtGlobalTxDropNoRoute	read-only	mandatory	The number of transmit packets dropped on all ports because no route was found.
1.3.6.1.4.1.434.2.2.8.21	ScalarrtGlobalTxDropNoResource	read-only	mandatory	The number of transmit packets dropped on all ports because resources were exhausted.
1.3.6.1.4.1.434.2.2.8.22	ScalarrtGlobalTxDropUnknownProt	read-only	mandatory	The number of transmit packets dropped because the WAN protocol is not supported.
1.3.6.1.4.1.434.2.2.8.23	ScalarrtGlobalRxDropNoResource	read-only	mandatory	The number of received packets dropped on all ports because resources were exhausted.
1.3.6.1.4.1.434.2.2.8.24	ScalarrtGlobalRxDropUnknownProt	read-only	mandatory	The number of received packets dropped because a LAN protocol is not supported.
1.3.6.1.4.1.434.2.2.8.25	ScalarrtGlobalRxError	read-only	mandatory	The number of errors encountered when receiving from the EiconCard(s).
1.3.6.1.4.1.434.2.2.8.26	ScalarrtGlobalCountersReset	read-write	mandatory	This variable is used to reset all router global counters.
1.3.6.1.4.1.434.2.2.8.27	ScalarrtTraceCtrl	read-write	mandatory	This object is used to start or stop the trace with the parameters specified by the following trace objects.
1.3.6.1.4.1.434.2.2.8.28	ScalarrtTraceFileName	read-write	mandatory	The (fully qualified) file name for the file which will hold the trace.
1.3.6.1.4.1.434.2.2.8.29	ScalarrtTraceInterfaceType	read-write	mandatory	The mask which indicates to the Agent the interface type(s) to be traced. The trace value for the lower layer is (1) and for the upper layer is (2).
1.3.6.1.4.1.434.2.2.8.30	TablertPortTable	not-accessible	mandatory	The router port table.
1.3.6.1.4.1.434.2.2.8.30.1	RowrtPortEntry	not-accessible	mandatory	The router information for one port.
1.3.6.1.4.1.434.2.2.8.30.1.1	ColumnrtPortIndex	read-only	mandatory	Index of this table
1.3.6.1.4.1.434.2.2.8.30.1.2	ColumnrtPortNumber	read-only	mandatory	EiconCard port number.
1.3.6.1.4.1.434.2.2.8.30.1.3	ColumnrtPortProtocol	read-only	mandatory	Mask indicating the choice of WAN protocols: x25 (1), fr (2), ppp (4), sna (8), hdlc (16).
1.3.6.1.4.1.434.2.2.8.30.1.4	ColumnrtPortTxThroughput	read-only	mandatory	Throughput calculated for the transmision.
1.3.6.1.4.1.434.2.2.8.30.1.5	ColumnrtPortRxThroughput	read-only	mandatory	Throughput calculated for the reception.
1.3.6.1.4.1.434.2.2.8.30.1.6	ColumnrtPortTxPackets	read-only	mandatory	Number of packets transmitted for this port.
1.3.6.1.4.1.434.2.2.8.30.1.7	ColumnrtPortTxBytesLow	read-only	mandatory	Number of bytes transmitted for this port; the low 32 bits of the 64 bits counter.
1.3.6.1.4.1.434.2.2.8.30.1.8	ColumnrtPortTxBytesHigh	read-only	mandatory	Number of bytes transmitted for this port; the high 32 bits of the 64 bits counter.
1.3.6.1.4.1.434.2.2.8.30.1.9	ColumnrtPortRxPackets	read-only	mandatory	Number of packets received for this port.
1.3.6.1.4.1.434.2.2.8.30.1.10	ColumnrtPortRxBytesLow	read-only	mandatory	Number of bytes received for this port; the low 32 bits of the 64 bits counter.
1.3.6.1.4.1.434.2.2.8.30.1.11	ColumnrtPortRxBytesHigh	read-only	mandatory	Number of bytes received for this port; the high 32 bits of the 64 bits counter.
1.3.6.1.4.1.434.2.2.8.30.1.12	ColumnrtPortTxDropNoResource	read-only	mandatory	Number of transmit packets dropped because no resources were available.
1.3.6.1.4.1.434.2.2.8.30.1.13	ColumnrtPortRxError	read-only	mandatory	Number of packets received with an EiconCard error.
1.3.6.1.4.1.434.2.2.8.30.1.14	ColumnrtPortCountersReset	read-write	mandatory	This object is used to reset the values of all counters for this port.
1.3.6.1.4.1.434.2.2.8.31	ScalarrtConnFreeIndex	read-only	mandatory	The index value used by the Management station to create the row in the rtConnTable. This value will be used to identify new instance of rtConnEntryStatus obje…
1.3.6.1.4.1.434.2.2.8.32	TablertConnTable	not-accessible	mandatory	The table of WAN connections to peer routers.
1.3.6.1.4.1.434.2.2.8.32.1	RowrtConnEntry	not-accessible	mandatory	The routing information for one destination.
1.3.6.1.4.1.434.2.2.8.32.1.1	ColumnrtConnIndex	read-only	mandatory	The index used to identify the connection entry.
1.3.6.1.4.1.434.2.2.8.32.1.2	ColumnrtConnName	read-write	mandatory	The name used to identify the connection entry.
1.3.6.1.4.1.434.2.2.8.32.1.3	ColumnrtConnComment	read-write	mandatory	Optional comment about the connection entry.
1.3.6.1.4.1.434.2.2.8.32.1.4	ColumnrtConnEntryStatus	read-write	mandatory	The object used to reserve the connection entry during the row creation. It also indicates if the entry is valid or not.
1.3.6.1.4.1.434.2.2.8.32.1.5	ColumnrtConnOperState	read-only	mandatory	The object describing the state of the connection.
1.3.6.1.4.1.434.2.2.8.32.1.6	ColumnrtConnAdminStateCtr	read-write	mandatory	The object used to start and stop the circuit for this connection entry.
1.3.6.1.4.1.434.2.2.8.32.1.7	ColumnrtConnAutoStart	read-write	mandatory	The object used to indicate if the connnection should be activated every time the router starts. Yes is the default.
1.3.6.1.4.1.434.2.2.8.32.1.8	ColumnrtConnType	read-write	mandatory	The type of connection.
1.3.6.1.4.1.434.2.2.8.32.1.9	ColumnrtConnInactivityTimeout	read-write	mandatory	The connection inactivity timeout in seconds.
1.3.6.1.4.1.434.2.2.8.32.1.10	ColumnrtConnPortNumber	read-write	mandatory	The EiconCard port number for this connection.
1.3.6.1.4.1.434.2.2.8.32.1.11	ColumnrtConnCompression	read-write	mandatory	The object indicating the type of compression to use, if any.
1.3.6.1.4.1.434.2.2.8.32.1.12	ColumnrtConnRetryNum	read-write	mandatory	The connection retry count; value (0) indicates no retry, value (100) indicates infinite retry, value (5) is the default.
1.3.6.1.4.1.434.2.2.8.32.1.13	ColumnrtConnRetryDelay	read-write	mandatory	The connection retry delay in seconds.
1.3.6.1.4.1.434.2.2.8.32.1.14	ColumnrtConnPeerRouter	read-write	mandatory	The type of the peer router for this connection.
1.3.6.1.4.1.434.2.2.8.32.1.15	ColumnrtConnLanProtocol	read-write	mandatory	The mask used to indicate the type of LAN protocols used for this connection. IPX =1, IP=2, AT=4.
1.3.6.1.4.1.434.2.2.8.32.1.16	ColumnrtConnWanProtocol	read-write	mandatory	The object indicates which WAN protocol will be used for this connection.
1.3.6.1.4.1.434.2.2.8.32.1.17	ColumnrtConnX25LocalDTE	read-write	mandatory	The X25 Local DTE Address configured for this connection.
1.3.6.1.4.1.434.2.2.8.32.1.18	ColumnrtConnX25RemoteDTE	read-write	mandatory	The X25 Remote DTE Address configured for this connection.
1.3.6.1.4.1.434.2.2.8.32.1.19	ColumnrtConnX25CallingFacilities	read-write	mandatory	The X25 Calling Facilities configured for this connection.
1.3.6.1.4.1.434.2.2.8.32.1.20	ColumnrtConnX25ListeningFacilities	read-write	mandatory	The X25 Listening Facilities configured for this connection.
1.3.6.1.4.1.434.2.2.8.32.1.21	ColumnrtConnX25UserData	read-write	mandatory	The X25 User Data configured for this connection.
1.3.6.1.4.1.434.2.2.8.32.1.22	ColumnrtConnX25Pvc	read-write	mandatory	The X25 PVC configured for this connection.
1.3.6.1.4.1.434.2.2.8.32.1.23	ColumnrtConnFrDlci	read-write	mandatory	The Frame Relay DLCI configured for this connection.
1.3.6.1.4.1.434.2.2.8.32.1.24	ColumnrtConnSnaPuName	read-write	mandatory	Physical Unit Name.
1.3.6.1.4.1.434.2.2.8.32.1.25	ColumnrtConnSnaLocalFqName	read-write	mandatory	Local fully qualified name.
1.3.6.1.4.1.434.2.2.8.32.1.26	ColumnrtConnSnaRemoteFqName	read-write	mandatory	Remote fully qualified name.
1.3.6.1.4.1.434.2.2.8.32.1.27	ColumnrtConnSnaModeName	read-write	mandatory	Mode name.
1.3.6.1.4.1.434.2.2.8.32.1.28	ColumnrtConnSnaSendPaceWindow	read-write	mandatory	Send Pace Window.
1.3.6.1.4.1.434.2.2.8.32.1.29	ColumnrtConnSnaReceivePaceWindow	read-write	mandatory	Receive Pace Window.
1.3.6.1.4.1.434.2.2.8.32.1.30	ColumnrtConnSnaRuSendLow	read-write	mandatory	Request Unit send low.
1.3.6.1.4.1.434.2.2.8.32.1.31	ColumnrtConnSnaRuReceiveLow	read-write	mandatory	Request Unit receive low.
1.3.6.1.4.1.434.2.2.8.32.1.32	ColumnrtConnSnaRuSendHigh	read-write	mandatory	Request Unit send high.
1.3.6.1.4.1.434.2.2.8.32.1.33	ColumnrtConnSnaRuReceiveHigh	read-write	mandatory	Request unit receive high.
1.3.6.1.4.1.434.2.2.8.32.1.34	ColumnrtConnUsage	read-write	mandatory	The connection can be defined as a primary or a backup connection for a primary.
1.3.6.1.4.1.434.2.2.8.32.1.35	ColumnrtConnFrSegmentation	read-write	mandatory	The object used to indicate if the Frame Relay segmentation (RFC1490) can be used on this connection.
1.3.6.1.4.1.434.2.2.8.32.1.36	ColumnrtConnFrXid	read-write	mandatory	The object used to indicate if the Frame-relay XID (RFC1490) can be used on this connection
1.3.6.1.4.1.434.2.2.8.32.1.37	ColumnrtConnPrimOrBackName	read-write	mandatory	This parameter applies only if the rtConnFunction field=FuncPrimary. This is the name used to identify primary connection entry.
1.3.6.1.4.1.434.2.2.8.32.1.38	ColumnrtConnRipSapUpdateType	read-write	mandatory	The update type of RIP / SAP.
1.3.6.1.4.1.434.2.2.8.32.1.39	ColumnrtConnSAPDelay	read-write	mandatory	The delay in minutes between the SAP updates on this WAN connection.
1.3.6.1.4.1.434.2.2.8.32.1.40	ColumnrtConnRIPDelay	read-write	mandatory	The delay in minutes between the RIP updates on this WAN connection.
1.3.6.1.4.1.434.2.2.8.33	ScalarrtIPMapFreeIndex	read-only	mandatory	The index value used by the Management station to create the row in the rtIPMappingTable. This value will be used to identify new instance of rtIPMapEntryStatu…
1.3.6.1.4.1.434.2.2.8.34	TablertIPMappingTable	not-accessible	mandatory	The IP mapping table.
1.3.6.1.4.1.434.2.2.8.34.1	RowrtIPMappingEntry	not-accessible	mandatory	One mapping information entry.
1.3.6.1.4.1.434.2.2.8.34.1.1	ColumnrtIPMapIndex	read-only	mandatory	The index used to identify the mapping entry. It is possible to have multiple LAN mapping entries for one connection.
1.3.6.1.4.1.434.2.2.8.34.1.2	ColumnrtIPMapConnIndex	read-write	mandatory	Indicates the connection which uses this mapping. It is equal to one of the rtConnIndex values from the rtConnTable.
1.3.6.1.4.1.434.2.2.8.34.1.3	ColumnrtIPMapEntryStatus	read-write	mandatory	The object used to reserve the mapping entry during the row creation. It also indicates if the entry is valid or not.
1.3.6.1.4.1.434.2.2.8.34.1.4	ColumnrtIPMapNextHop	read-write	mandatory	The address of the next hop. It is indicated if the Management station knows the address and it can not be discovered by the router.
1.3.6.1.4.1.434.2.2.8.34.1.5	ColumnrtIPMapBroadcast	read-write	mandatory	The object which indicates to the router if it may send broadcasts for this connection. 'Yes' is the default value.
1.3.6.1.4.1.434.2.2.8.34.1.6	ColumnrtIPMapIPMask	read-write	mandatory	The IP address mask to be used for this mapping.
1.3.6.1.4.1.434.2.2.8.34.1.7	ColumnrtIPMapVJCompress	read-write	mandatory	The object which indicates if the VanJacobsen compression is to be used for this mapping.
1.3.6.1.4.1.434.2.2.8.35	TablertCircuitTable	not-accessible	mandatory	The router circuit table.
1.3.6.1.4.1.434.2.2.8.35.1	RowrtCircuitEntry	not-accessible	mandatory	The circuit information for one WAN connection. An entry in this table will be created by the Agent when the circuit is opened for a specified connection.
1.3.6.1.4.1.434.2.2.8.35.1.1	ColumnrtCircuitConnIndex	read-only	mandatory	Indicates the connection which generated this circuit. It is equal to one of the rtConnIndex values from the rtConnTable.
1.3.6.1.4.1.434.2.2.8.35.1.2	ColumnrtCircuitStatus	read-only	mandatory	Indicates the circuit status.
1.3.6.1.4.1.434.2.2.8.35.1.3	ColumnrtCircuitTimeUp	read-only	mandatory	Time elapsed since this circuit was started.
1.3.6.1.4.1.434.2.2.8.35.1.4	ColumnrtCircuitErrCode	read-only	mandatory	Last error code returned from the EiconCard.
1.3.6.1.4.1.434.2.2.8.35.1.5	ColumnrtCircuitSessionType	read-only	mandatory	Type of circuit session.
1.3.6.1.4.1.434.2.2.8.35.1.6	ColumnrtCircuitConnLSN	read-only	mandatory	Connection Manager LSN used for management.
1.3.6.1.4.1.434.2.2.8.35.1.7	ColumnrtCircuitDataLSN	read-only	mandatory	Connection Manager LSN used for data.
1.3.6.1.4.1.434.2.2.8.35.1.8	ColumnrtCircuitCmSelector	read-only	mandatory	Handle returned by Connection Manager for this circuit.
1.3.6.1.4.1.434.2.2.8.35.1.9	ColumnrtCircuitCompression	read-only	mandatory	Compression on/off, after negotiation.
1.3.6.1.4.1.434.2.2.8.35.1.10	ColumnrtCircuitCompAlgorithm	read-only	mandatory	Compression type, after negotiation.
1.3.6.1.4.1.434.2.2.8.35.1.11	ColumnrtCircuitBeforeComp	read-only	mandatory	Number of bytes sent before compression.
1.3.6.1.4.1.434.2.2.8.35.1.12	ColumnrtCircuitAfterComp	read-only	mandatory	Number of bytes sent after compression.
1.3.6.1.4.1.434.2.2.8.35.1.13	ColumnrtCircuitTxErr	read-only	mandatory	The number of Transmit errors
1.3.6.1.4.1.434.2.2.8.35.1.14	ColumnrtCircuitBoundLANProtocol	read-only	mandatory	The mask used to indicate the type of LAN protocols used for this connection. Possible values are: IPX=1, IP=2, AT=4.
1.3.6.1.4.1.434.2.2.8.35.1.15	ColumnrtCircuitRemoteRouter	read-only	mandatory	The name of the remote router discovered by the local router.
1.3.6.1.4.1.434.2.2.8.35.1.16	ColumnrtCircuitCountersReset	read-write	mandatory	The object is used to reset all counters for this circuit.
1.3.6.1.4.1.434.2.2.8.35.1.17	ColumnrtCircuitWanProtocol	read-only	mandatory	The object indicates which WAN protocol will be used for this connection.
1.3.6.1.4.1.434.2.2.8.35.1.18	ColumnrtCircuitX25LocalDTE	read-only	mandatory	The X25 Local DTE Address for this circuit
1.3.6.1.4.1.434.2.2.8.35.1.19	ColumnrtCircuitX25RemoteDTE	read-only	mandatory	The X25 Remote DTE Address for this circuit
1.3.6.1.4.1.434.2.2.8.35.1.20	ColumnrtCircuitX25CallingFacilities	read-only	mandatory	The X25 Calling Facilities for this circuit
1.3.6.1.4.1.434.2.2.8.35.1.21	ColumnrtCircuitX25ListeningFacilities	read-only	mandatory	The X25 Listening Facilities for this circuit
1.3.6.1.4.1.434.2.2.8.35.1.22	ColumnrtCircuitX25UserData	read-only	mandatory	The X25 User Data for this circuit
1.3.6.1.4.1.434.2.2.8.35.1.23	ColumnrtCircuitX25Cause	read-only	mandatory	The Cause of Circuit connection failure
1.3.6.1.4.1.434.2.2.8.35.1.24	ColumnrtCircuitX25Diag	read-only	mandatory	Diagnostics code of the Circuit connection failure.
1.3.6.1.4.1.434.2.2.8.35.1.25	ColumnrtCircuitX25Pvc	read-only	mandatory	The X25 PVC for this circuit.
1.3.6.1.4.1.434.2.2.8.35.1.26	ColumnrtCircuitFrDlci	read-only	mandatory	The Frame Relay DLCI for this circuit.
1.3.6.1.4.1.434.2.2.8.35.1.27	ColumnrtCircuitFrSegmentation	read-only	mandatory	The object used to indicate if the Frame Relay segmentation (RFC1490) can be used on this circuit.
1.3.6.1.4.1.434.2.2.8.35.1.28	ColumnrtCircuitFrXIDNegot	read-only	mandatory	The object used to indicate if the Frame Relay XID (RFC1490) can be used on this circuit.
1.3.6.1.4.1.434.2.2.8.35.1.29	ColumnrtCircuitFrXIDPacketSize	read-only	mandatory	The size of the Frame Relay XID packet.
1.3.6.1.4.1.434.2.2.8.35.1.30	ColumnrtCircuitFrCongestion	read-only	mandatory	The object indicates if Frame Relay can be congested on this circuit.
1.3.6.1.4.1.434.2.2.8.36	TablertCircuitIPTable	not-accessible	mandatory	The router IP info table.
1.3.6.1.4.1.434.2.2.8.36.1	RowrtCircuitIPEntry	not-accessible	mandatory	The circuit information specific to IP.
1.3.6.1.4.1.434.2.2.8.36.1.1	ColumnrtCircuitIPConnIndex	read-only	mandatory	Indicates the connection which generated this circuit. It is equal to one of the rtConnIndex values from the rtConnTable.
1.3.6.1.4.1.434.2.2.8.36.1.2	ColumnrtCircuitIPRemoteAddress	read-only	mandatory	Remote router IP address.
1.3.6.1.4.1.434.2.2.8.36.1.3	ColumnrtCircuitIPLocalAddress	read-only	mandatory	Local router IP address.
1.3.6.1.4.1.434.2.2.8.36.1.4	ColumnrtCircuitIPTxPackets	read-only	mandatory	Number of transmit packets which carry IP.
1.3.6.1.4.1.434.2.2.8.36.1.5	ColumnrtCircuitIPTxBytes	read-only	mandatory	Number of transmit bytes which carry IP.
1.3.6.1.4.1.434.2.2.8.36.1.6	ColumnrtCircuitIPRxPackets	read-only	mandatory	Number of received packets which carry IP.
1.3.6.1.4.1.434.2.2.8.36.1.7	ColumnrtCircuitIPRxBytes	read-only	mandatory	Number of received bytes which carry IP.
1.3.6.1.4.1.434.2.2.8.37	TablertCircuitIPXTable	not-accessible	mandatory	The router IPX info table.
1.3.6.1.4.1.434.2.2.8.37.1	RowrtCircuitIPXEntry	not-accessible	mandatory	The circuit information.
1.3.6.1.4.1.434.2.2.8.37.1.1	ColumnrtCircuitIPXConnIndex	read-only	mandatory	Indicates the connection which generated this circuit.It is equal to one of the rtConnIndex values from the rtConnTable.
1.3.6.1.4.1.434.2.2.8.37.1.2	ColumnrtCircuitIPXRemoteNode	read-only	mandatory	Remote router node address.
1.3.6.1.4.1.434.2.2.8.37.1.3	ColumnrtCircuitIPXRemoteNetwork	read-only	mandatory	Remote router network address.
1.3.6.1.4.1.434.2.2.8.37.1.4	ColumnrtCircuitIPXLocalNode	read-only	mandatory	Local router node address.
1.3.6.1.4.1.434.2.2.8.37.1.5	ColumnrtCircuitIPXLocalNetwork	read-only	mandatory	Local router network address.
1.3.6.1.4.1.434.2.2.8.37.1.6	ColumnrtCircuitIPXTxPackets	read-only	mandatory	Number of transmit packets which carry IPX.
1.3.6.1.4.1.434.2.2.8.37.1.7	ColumnrtCircuitIPXTxBytes	read-only	mandatory	Number of transmit bytes which carry IPX.
1.3.6.1.4.1.434.2.2.8.37.1.8	ColumnrtCircuitIPXRxPackets	read-only	mandatory	Number of received packets which carry IPX.
1.3.6.1.4.1.434.2.2.8.37.1.9	ColumnrtCircuitIPXRxBytes	read-only	mandatory	Number of received bytes which carry IPX.
1.3.6.1.4.1.434.2.2.8.38	TablertCircuitATTable	not-accessible	mandatory	The router AT info table.
1.3.6.1.4.1.434.2.2.8.38.1	RowrtCircuitATEntry	not-accessible	mandatory	The AT circuit information.
1.3.6.1.4.1.434.2.2.8.38.1.1	ColumnrtCircuitATConnIndex	read-only	mandatory	Indicates the connection which generated this circuit.It is equal to one of the rtConnIndex values from the rtConnTable.
1.3.6.1.4.1.434.2.2.8.38.1.2	ColumnrtCircuitATRemoteNet	read-only	mandatory	Remote router network address.
1.3.6.1.4.1.434.2.2.8.38.1.3	ColumnrtCircuitATRemoteNode	read-only	mandatory	Remote router node address.
1.3.6.1.4.1.434.2.2.8.38.1.4	ColumnrtCircuitATLocalNet	read-only	mandatory	Local router network address.
1.3.6.1.4.1.434.2.2.8.38.1.5	ColumnrtCircuitATLocalNode	read-only	mandatory	Local router node address.
1.3.6.1.4.1.434.2.2.8.38.1.6	ColumnrtCircuitATTxPackets	read-only	mandatory	Number of transmit packets which carry AT.
1.3.6.1.4.1.434.2.2.8.38.1.7	ColumnrtCircuitATTxBytes	read-only	mandatory	Number of transmit bytes which carry AT.
1.3.6.1.4.1.434.2.2.8.38.1.8	ColumnrtCircuitATRxPackets	read-only	mandatory	Number of received packets which carry AT.
1.3.6.1.4.1.434.2.2.8.38.1.9	ColumnrtCircuitATRxBytes	read-only	mandatory	Number of received bytes which carry AT.
1.3.6.1.4.1.434.2.2.8.39	ScalarrtMaxIPFilter	read-only	mandatory	The maximum number of IP Filters that can be configured for this router.
1.3.6.1.4.1.434.2.2.8.40	ScalarrtAvailableIPFilter	read-only	mandatory	The number of IP Filters still available for this router.
1.3.6.1.4.1.434.2.2.8.41	ScalarrtIPFilterDropStatsIn	read-only	mandatory	Total number of incoming packets dropped.
1.3.6.1.4.1.434.2.2.8.42	ScalarrtIPFilterDropStatsOut	read-only	mandatory	Total number of outgoing packets dropped.
1.3.6.1.4.1.434.2.2.8.43	ScalarrtIPFilterForwardStatsIn	read-only	mandatory	Total number of incoming packets forwarded.
1.3.6.1.4.1.434.2.2.8.44	ScalarrtIPFilterForwardStatsOut	read-only	mandatory	Total number of outgoing packets forwarded.
1.3.6.1.4.1.434.2.2.8.45	ScalarrtIPFilterFreeIndex	read-only	mandatory	This number indicating to the Manager the next available rtIPFilterIndex for a new Entry in the rtIPFilterTable (0 for none). The Manager will first get this v…
1.3.6.1.4.1.434.2.2.8.46	TablertIPFilterTable	not-accessible	mandatory	The IP Filter table.
1.3.6.1.4.1.434.2.2.8.46.1	RowrtIPFilterEntry	not-accessible	mandatory	Information on an IP Filter.
1.3.6.1.4.1.434.2.2.8.46.1.1	ColumnrtIPFilterConnIndex	read-only	mandatory	Same as rtConnIndex.
1.3.6.1.4.1.434.2.2.8.46.1.2	ColumnrtIPFilterIndex	read-only	mandatory	Index of IP Filter for the connection.
1.3.6.1.4.1.434.2.2.8.46.1.3	ColumnrtIPFilterEntryStatus	read-write	mandatory	The object used to reserve the connection entry during the row creation. It also indicates if the entry is valid or not.
1.3.6.1.4.1.434.2.2.8.46.1.4	ColumnrtIPFilterOperState	read-only	mandatory	The object indicates the state of the IP Filter.
1.3.6.1.4.1.434.2.2.8.46.1.5	ColumnrtIPFilterAdminStateCtr	read-write	mandatory	The object used to start and stop the IP Filter.
1.3.6.1.4.1.434.2.2.8.46.1.6	ColumnrtIPFilterPosition	read-write	mandatory	This variable indicates the order that the router should apply each filter. This field can be set only when adding a new IP Filter for a connection. The manage…
1.3.6.1.4.1.434.2.2.8.46.1.7	ColumnrtIPFilterAction	read-write	mandatory	Drop (1) or Forward (2) the information.
1.3.6.1.4.1.434.2.2.8.46.1.8	ColumnrtIPFilterDirection	read-write	mandatory	Specifies if the filter is applied to outgoing, incoming or both ways packets.
1.3.6.1.4.1.434.2.2.8.46.1.9	ColumnrtIPFilterPortType	read-write	mandatory	Protocol type.
1.3.6.1.4.1.434.2.2.8.46.1.10	ColumnrtIPFilterLowSrcPort	read-write	mandatory	Low Source Port.
1.3.6.1.4.1.434.2.2.8.46.1.11	ColumnrtIPFilterHighSrcPort	read-write	mandatory	High Source Port.
1.3.6.1.4.1.434.2.2.8.46.1.12	ColumnrtIPFilterLowDestPort	read-write	mandatory	Low Destination Port.
1.3.6.1.4.1.434.2.2.8.46.1.13	ColumnrtIPFilterHighDestPort	read-write	mandatory	High Destination Port.
1.3.6.1.4.1.434.2.2.8.46.1.14	ColumnrtIPFilterIPAddressSrc	read-write	mandatory	Source IP Address.
1.3.6.1.4.1.434.2.2.8.46.1.15	ColumnrtIPFilterIPMaskSrc	read-write	mandatory	Mask of the source IP Address.
1.3.6.1.4.1.434.2.2.8.46.1.16	ColumnrtIPFilterIPAddressDest	read-write	mandatory	Destination IP Address.
1.3.6.1.4.1.434.2.2.8.46.1.17	ColumnrtIPFilterIPMaskDest	read-write	mandatory	Mask of the destination IP Address.
1.3.6.1.4.1.434.2.2.8.46.1.18	ColumnrtIPFilterStatsIn	read-only	mandatory	The number of incoming packets that match the filter.
1.3.6.1.4.1.434.2.2.8.46.1.19	ColumnrtIPFilterStatsOut	read-only	mandatory	The number of outgoing packets that match the filter.
1.3.6.1.4.1.434.2.2.8.47	ScalarrtActionState	read-only	mandatory	The state of the operation performed on the router by the Agent as a result of setting the values to the 'rtAdminStateCtrl'. The Management station will poll t…
1.3.6.1.4.1.434.2.2.8.48	ScalarrtActionError	read-only	mandatory	The error code after the unsuccessful operation.

Type Definitions

Name	Syntax	Status	Description
ActionState	INTEGER { done (1), failed (2), in-progress (3) }
AdminState	INTEGER { start (1), stop (2), dump (3), test (4), invalid (5) }
CardRef	INTEGER (1..6)
ConnectionStatus	INTEGER { invalid (1), listening (2), calling (3), connected (4), hangingup (5), hungup (6), pending-hungup (7) }
ControlOnOff	INTEGER { stop (1), start (2), invalid (3) }
EntryStatus	INTEGER { valid (1), createRequest (2), underCreation (3), invalid (4) }
EntryStatusV2	INTEGER { valid (1), createRequest (2), underCreation (3), invalid (4), modifyRequest (5), underModification (6) }
OperState	INTEGER { other (1), disabled (2), ready (3), active (4), busy (5) }
PortRef	INTEGER (1..48)
PositiveInteger	INTEGER (0..2147483647)

MIB Viewer

What's a MIB?

What's SNMP?

What's an OID?

SNMP Fundamentals

Using net-snmp

Configuring SNMP on Cisco devices

Configuring SNMP on Fortinet devices

Understanding MIBs

Troubleshooting SNMP

Searching OIDs

Modem/MTA bootfiles

DOCSIS Monitoring

Linux snmpd passthrough

EICON-MIB-ROUTER

Bulk Translate

Search Vendor MIBs

Search Vendor Traps