ELFIQ-MODULE-LB-MIB
119 objects
This is the standard component of the link balancer
Imported Objects
| ELFIQ-INC-MIB | linkBalancer linkBalancerConformance |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-MIB | snmpTraps |
| SNMPv2-SMI | Counter64 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.19713.1.2.1 | IdentitylinkBalancerComponent | This is the standard component of the link balancer | ||
| 1.3.6.1.4.1.19713.1.2.1.1 | NodevfiInfo | |||
| 1.3.6.1.4.1.19713.1.2.1.1.1 | ScalarvfiNumber | read-only | current | The number of virtual forwarder interfaces configured in the system |
| 1.3.6.1.4.1.19713.1.2.1.1.2 | TablevfiTable | not-accessible | current | This is a list of vfi entries. The number of vfi is given by the value of vfiNumber. |
| 1.3.6.1.4.1.19713.1.2.1.1.2.1 | RowvfiEntry | not-accessible | current | An entry containing vfi sub-component. |
| 1.3.6.1.4.1.19713.1.2.1.1.2.1.1 | ColumnvfiIndex | read-only | current | The vfi index 0 - 4 |
| 1.3.6.1.4.1.19713.1.2.1.1.2.1.2 | ColumnvfiDescr | read-only | current | A textual string containing a description about the vfi |
| 1.3.6.1.4.1.19713.1.2.1.1.2.1.3 | ColumnvfiActivated | read-only | current | Inform if this vfi has been activated at startup |
| 1.3.6.1.4.1.19713.1.2.1.1.2.1.4 | ColumnvfiStatus | read-only | current | The current status of the vfi |
| 1.3.6.1.4.1.19713.1.2.1.1.2.1.5 | ColumntotThroughputIn | read-only | current | This is the total incoming throughput for this vfi (all gmacs) in kb/s |
| 1.3.6.1.4.1.19713.1.2.1.1.2.1.6 | ColumntotThroughputOut | read-only | current | This is the total outgoing throughput for this vfi (all gmacs) in kb/s |
| 1.3.6.1.4.1.19713.1.2.1.1.2.1.7 | ColumntopTotThroughputIn | read-only | current | This is the top total incoming throughput for this vfi (all gmacs) in kb/s |
| 1.3.6.1.4.1.19713.1.2.1.1.2.1.8 | ColumntopTotThroughputOut | read-only | current | This is the top total outgoing throughput for this vfi (all gmacs) in kb/s |
| 1.3.6.1.4.1.19713.1.2.1.1.2.1.9 | ColumnnumPackReceivedOut | read-only | current | This is the total number of packets received outside |
| 1.3.6.1.4.1.19713.1.2.1.1.2.1.10 | ColumnnumBytesReceivedOut | read-only | current | This is the total number of bytes received outside |
| 1.3.6.1.4.1.19713.1.2.1.1.2.1.11 | ColumnnumPackReceivedIn | read-only | current | This is the total number of packets received inside |
| 1.3.6.1.4.1.19713.1.2.1.1.2.1.12 | ColumnnumBytesReceivedIn | read-only | current | This is the total number of bytes received inside |
| 1.3.6.1.4.1.19713.1.2.1.1.2.1.13 | ColumnnumL2Dropped | read-only | current | This is the total number of L2 dropped packets |
| 1.3.6.1.4.1.19713.1.2.1.1.2.1.14 | ColumnnumIPDroppedShun | read-only | current | This is the total number of IP dropped packets (shun) |
| 1.3.6.1.4.1.19713.1.2.1.1.2.1.15 | ColumnnumIPDroppedAll | read-only | current | This is the total number of IP dropped packets (all) |
| 1.3.6.1.4.1.19713.1.2.1.1.2.1.16 | ColumnnumIPFragNat | read-only | current | This is the total number of IP fragmented ( Nat ) packets |
| 1.3.6.1.4.1.19713.1.2.1.1.2.1.17 | ColumnnumTCPMSSModif | read-only | current | This is the total number of TCP MSS modified |
| 1.3.6.1.4.1.19713.1.2.1.1.2.1.18 | ColumnnumTCPCheckError | read-only | current | This is the total number of TCP checksum error (Nat) packets |
| 1.3.6.1.4.1.19713.1.2.1.1.2.1.19 | ColumnnumUDPCheckError | read-only | current | This is the total number of UDP checksum error (Nat) packets |
| 1.3.6.1.4.1.19713.1.2.1.1.2.1.20 | ColumntotNumDropProbe | read-only | current | This is the total number of dropped packets (probe) |
| 1.3.6.1.4.1.19713.1.2.1.1.2.1.21 | ColumntotNumDropProbePerSec | read-only | current | This is the total number of dropped packets/sec (probe) |
| 1.3.6.1.4.1.19713.1.2.1.1.2.1.22 | ColumnlastPacketTimeTraver | read-only | current | This is the last vfi packet time traversal |
| 1.3.6.1.4.1.19713.1.2.1.1.2.1.23 | ColumntopPacketTimeTraver | read-only | current | This is the top vfi packet time traversal |
| 1.3.6.1.4.1.19713.1.2.1.1.2.1.24 | ColumnnumLiveSessIn | read-only | current | This is the dnat inside total number of live sessions |
| 1.3.6.1.4.1.19713.1.2.1.1.2.1.25 | ColumntopNumLiveSessIn | read-only | current | This is the dnat inside top total number of live sessions |
| 1.3.6.1.4.1.19713.1.2.1.1.2.1.26 | ColumnsamplingIntervalIn | read-only | current | This is the dnat inside sampling interval |
| 1.3.6.1.4.1.19713.1.2.1.1.2.1.27 | ColumnnumNewSessPerSecIn | read-only | current | This is the dnat inside total number of new sessions/sec |
| 1.3.6.1.4.1.19713.1.2.1.1.2.1.28 | ColumnnumEndSessPerSecIn | read-only | current | This is the dnat inside total number of ending sessions/sec |
| 1.3.6.1.4.1.19713.1.2.1.1.2.1.29 | ColumnnumHandledSessIn | read-only | current | This is the dnat inside total number of handled sessions |
| 1.3.6.1.4.1.19713.1.2.1.1.2.1.30 | ColumnnumLiveSessOut | read-only | current | This is the dnat outside total number of live sessions |
| 1.3.6.1.4.1.19713.1.2.1.1.2.1.31 | ColumntopNumLiveSessOut | read-only | current | This is the dnat Outside top total number of live sessions |
| 1.3.6.1.4.1.19713.1.2.1.1.2.1.32 | ColumnsamplingIntervalOut | read-only | current | This is the dnat Outside sampling interval |
| 1.3.6.1.4.1.19713.1.2.1.1.2.1.33 | ColumnnumNewSessPerSecOut | read-only | current | This is the dnat Outside total number of new sessions/sec |
| 1.3.6.1.4.1.19713.1.2.1.1.2.1.34 | ColumnnumEndSessPerSecOut | read-only | current | This is the dnat Outside total number of ending sessions/sec |
| 1.3.6.1.4.1.19713.1.2.1.1.2.1.35 | ColumnnumHandledSessOut | read-only | current | This is the dnat Outside total number of handled sessions |
| 1.3.6.1.4.1.19713.1.2.1.1.2.1.36 | ColumnnumDNSReqPerSecOut | read-only | current | This is the total outside number of dns requests/sec |
| 1.3.6.1.4.1.19713.1.2.1.1.2.1.37 | ColumntopNumDNSReqPerSecOut | read-only | current | This is the top total outside number of dns requests/sec |
| 1.3.6.1.4.1.19713.1.2.1.1.2.1.38 | ColumnnumHandledDNSReqOut | read-only | current | This is the total outside number of handled dns requests |
| 1.3.6.1.4.1.19713.1.2.1.1.2.1.39 | ColumnnumDNSReqPerSecIn | read-only | current | This is the total inside number of dns requests/sec |
| 1.3.6.1.4.1.19713.1.2.1.1.2.1.40 | ColumntopNumDNSReqPerSecIn | read-only | current | This is the top total inside number of dns requests/sec |
| 1.3.6.1.4.1.19713.1.2.1.1.2.1.41 | ColumnnumHandledDNSReqIn | read-only | current | This is the total inside number of handled dns requests |
| 1.3.6.1.4.1.19713.1.2.1.2 | NodegmacInfo | |||
| 1.3.6.1.4.1.19713.1.2.1.2.1 | ScalargmacNumber | read-only | current | The number of gmac configured on this system |
| 1.3.6.1.4.1.19713.1.2.1.2.2 | TablegmacTable | not-accessible | current | This is a list of gmac entries. The number of gmac is given by the value of gmacNumber. |
| 1.3.6.1.4.1.19713.1.2.1.2.2.1 | RowgmacEntry | not-accessible | current | An entry containing gmac information. |
| 1.3.6.1.4.1.19713.1.2.1.2.2.1.1 | ColumngmacVfiNumber | read-only | current | This is vfi number containing this gmac |
| 1.3.6.1.4.1.19713.1.2.1.2.2.1.2 | ColumngmacIndex | read-only | current | A unique value, equal or greater than zero, for each gmac in the vfi. |
| 1.3.6.1.4.1.19713.1.2.1.2.2.1.3 | ColumngmacName | read-only | current | A textual string containing the gmac name |
| 1.3.6.1.4.1.19713.1.2.1.2.2.1.4 | ColumngmacDescr | read-only | current | A textual string containing a description about the gmac |
| 1.3.6.1.4.1.19713.1.2.1.2.2.1.5 | ColumngmacStatus | read-only | current | The desired state of a gmac; up and down states are used for notifications |
| 1.3.6.1.4.1.19713.1.2.1.2.2.1.6 | ColumngmacMessage | read-only | current | This is the general information string provided by a gmac |
| 1.3.6.1.4.1.19713.1.2.1.2.2.1.7 | ColumngmacMode | read-only | current | This is the mode of the gmac: monomode or multimode |
| 1.3.6.1.4.1.19713.1.2.1.2.2.1.8 | ColumngmacType | read-only | current | This is the type of the gmac: monomode or multimode |
| 1.3.6.1.4.1.19713.1.2.1.2.2.1.9 | ColumngmacIPAddress | read-only | current | This is the IP address of the gmac |
| 1.3.6.1.4.1.19713.1.2.1.2.2.1.10 | ColumngmacNetmask | read-only | current | This is the network mask of the gmac |
| 1.3.6.1.4.1.19713.1.2.1.2.2.1.11 | ColumngmacPrimaryNetwork | read-only | current | This is the gmac primary network |
| 1.3.6.1.4.1.19713.1.2.1.2.2.1.12 | ColumngmacMtu | read-only | current | This is the mtu size |
| 1.3.6.1.4.1.19713.1.2.1.2.2.1.13 | ColumngmacProbeSource | read-only | current | Future Use: This is the gmac probe source ip address |
| 1.3.6.1.4.1.19713.1.2.1.2.2.1.14 | ColumngmacProbeSourceType | read-only | current | Future Use: This is the gmac probe source type |
| 1.3.6.1.4.1.19713.1.2.1.2.2.1.15 | ColumngmacProbeDest | read-only | current | Future Use: This is the gmac probe destination address |
| 1.3.6.1.4.1.19713.1.2.1.2.2.1.16 | ColumngmacProbeDestInt | read-only | current | Future Use: This is the gmac probe intervalle |
| 1.3.6.1.4.1.19713.1.2.1.2.2.1.17 | ColumngmacProbeFailThres | read-only | current | Future Use: This is the gmac probe failure threshold |
| 1.3.6.1.4.1.19713.1.2.1.2.2.1.18 | ColumngmacProbeFailTimeout | read-only | current | Future Use: This is the gmac probe failure timeout |
| 1.3.6.1.4.1.19713.1.2.1.2.2.1.19 | ColumngmacProbeSynSeq | read-only | current | Future Use: This is the gmac number of syn sequence sent |
| 1.3.6.1.4.1.19713.1.2.1.2.2.1.20 | ColumngmacProbeFail | read-only | current | Future Use: This is the gmac probe failure |
| 1.3.6.1.4.1.19713.1.2.1.2.2.1.21 | ColumngmacRTT | read-only | current | This is the gmac probe round-time-trip |
| 1.3.6.1.4.1.19713.1.2.1.2.2.1.22 | ColumngmacWeight | read-only | current | This is the gmac weigth |
| 1.3.6.1.4.1.19713.1.2.1.2.2.1.23 | ColumngmacInThreshold | read-only | current | This is the gmac weigth |
| 1.3.6.1.4.1.19713.1.2.1.2.2.1.24 | ColumngmacOutThreshold | read-only | current | This is the gmac out threshold |
| 1.3.6.1.4.1.19713.1.2.1.2.2.1.25 | ColumngmacSpeedIn | read-only | current | This is the gmac speed in |
| 1.3.6.1.4.1.19713.1.2.1.2.2.1.26 | ColumngmacSpeedOut | read-only | current | This is the gmac speed out |
| 1.3.6.1.4.1.19713.1.2.1.2.2.1.27 | ColumngmacSampleInter | read-only | current | Future Use: This is the gmac sample interval |
| 1.3.6.1.4.1.19713.1.2.1.2.2.1.28 | ColumngmacSampleCount | read-only | current | Future Use: This is the gmac sample count |
| 1.3.6.1.4.1.19713.1.2.1.2.2.1.29 | ColumngmacL2No | read-only | current | Future Use: This is the gmac L2 information |
| 1.3.6.1.4.1.19713.1.2.1.2.2.1.30 | ColumngmacTotalIn | read-only | current | This is the gmac total In |
| 1.3.6.1.4.1.19713.1.2.1.2.2.1.31 | ColumngmacTotalOut | read-only | current | This is the gmac total Out |
| 1.3.6.1.4.1.19713.1.2.1.2.2.1.32 | ColumngmacAvgIn | read-only | current | This is the gmac average in |
| 1.3.6.1.4.1.19713.1.2.1.2.2.1.33 | ColumngmacAvgOut | read-only | current | This is the gmac average out |
| 1.3.6.1.4.1.19713.1.2.1.2.2.1.34 | ColumngmacUsageIn | read-only | current | This is the gmac usage in |
| 1.3.6.1.4.1.19713.1.2.1.2.2.1.35 | ColumngmacUsageOut | read-only | current | This is the gmac usage out |
| 1.3.6.1.4.1.19713.1.2.1.2.2.1.36 | ColumngmacUsageInPercent | read-only | current | This is the gmac usage in percent |
| 1.3.6.1.4.1.19713.1.2.1.2.2.1.37 | ColumngmacUsageOutPercent | read-only | current | This is the gmac usage in out percent |
| 1.3.6.1.4.1.19713.1.2.1.2.2.1.38 | ColumngmacTopSpeedIn | read-only | current | This is the gmac top speed in |
| 1.3.6.1.4.1.19713.1.2.1.2.2.1.39 | ColumngmacTopSpeedOut | read-only | current | This is the gmac top speed out |
| 1.3.6.1.4.1.19713.1.2.1.2.2.1.40 | ColumngmacQosActivated | read-only | current | This is the gmac QOS activation |
| 1.3.6.1.4.1.19713.1.2.1.2.2.1.41 | ColumngmacBeforeQosUsageIn | read-only | current | This is the gmac QOS usage in |
| 1.3.6.1.4.1.19713.1.2.1.2.2.1.42 | ColumngmacBeforeQosUsageOut | read-only | current | This is the gmac QOS usage out |
| 1.3.6.1.4.1.19713.1.2.1.3 | NodearpInfo | |||
| 1.3.6.1.4.1.19713.1.2.1.3.1 | ScalararpNumber | not-accessible | current | The number of arp entries in this system |
| 1.3.6.1.4.1.19713.1.2.1.3.2 | TablearpTable | not-accessible | current | This is a list of arp entries. The number of arp is given by the value of arpNumber. |
| 1.3.6.1.4.1.19713.1.2.1.3.2.1 | RowarpEntry | not-accessible | current | An entry containing arp information. |
| 1.3.6.1.4.1.19713.1.2.1.3.2.1.1 | ColumnarpVfiNumber | read-only | current | For future use : This is vfi number which poll arp devices |
| 1.3.6.1.4.1.19713.1.2.1.3.2.1.2 | ColumnarpIndex | read-only | current | For future use : A unique value, equal or greater than zero, for each arp entries in the vfi. |
| 1.3.6.1.4.1.19713.1.2.1.3.2.1.3 | ColumnarpMessage | read-only | current | Used by notification, but not yet implemented in the mib tree: This is the general information string provided by a arp |
| 1.3.6.1.4.1.19713.1.2.2 | NodelinkBalancerNotification | |||
| 1.3.6.1.4.1.19713.1.2.2.1 | NodegmacNotification | |||
| 1.3.6.1.4.1.19713.1.2.2.1.1 | NotificationgmacStatusNotInitialiazed | current | This notification is sent when you load balancer is unable to initiate gmac X | |
| 1.3.6.1.4.1.19713.1.2.2.1.2 | NotificationgmacStatusChanged | current | This notification is sent when the status of your gmac has changed | |
| 1.3.6.1.4.1.19713.1.2.2.1.3 | NotificationgmacInSaturated | current | This notification is sent when a significant consumption of incoming bandwidth was maintained for the last 300 seconds | |
| 1.3.6.1.4.1.19713.1.2.2.1.4 | NotificationgmacOutSaturated | current | This notification is sent when a significant consumption of outgoing bandwidth was maintained for the last 300 seconds | |
| 1.3.6.1.4.1.19713.1.2.2.2 | NodevfiNotification | |||
| 1.3.6.1.4.1.19713.1.2.2.3 | NodearpNotification | |||
| 1.3.6.1.4.1.19713.1.2.2.3.1 | NotificationarpDeviceNotResponding | current | This notification is sent when Device IP X stopped responding arp request | |
| 1.3.6.1.4.1.19713.2.2.2 | NodevfiGroups | |||
| 1.3.6.1.4.1.19713.2.2.2.1 | GroupvfiStatsGroup | current | A collection of objects providing the vfi statistic information | |
| 1.3.6.1.4.1.19713.2.2.3 | NodegmacGroups | |||
| 1.3.6.1.4.1.19713.2.2.3.1 | GroupgmacNetworkGroup | current | A collection of objects providing network information | |
| 1.3.6.1.4.1.19713.2.2.3.2 | GroupgmacNotificationGroup | current | A collection of objects notification corresponding to gmac changes | |
| 1.3.6.1.4.1.19713.2.2.4 | NodearpGroups | |||
| 1.3.6.1.4.1.19713.2.2.4.1 | GrouparpNetworkGroup | current | A collection of objects providing arp information | |
| 1.3.6.1.4.1.19713.2.2.4.2 | GrouparpNotificationGroup | current | A collection of objects notification corresponding to arp changes |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ArpIndex | Integer32 (0..2147483647) | current | A unique value, equal or greater than zero, for each arp entry in the vfi. |
| GmacIndex | Integer32 (0..2147483647) | current | A unique value, equal or greater than zero, for each gmac in the vfi. |
| VfiIndex | Integer32 (0..5) | current | A unique value, greater than zero, for each vfi in the llb |