EQUIPE-SONET-MIB
22 objects
This is the Equipe SONET MIB module.
Imported Objects
| IF-MIB | ifIndex |
| RFC1155-SMI | enterprises |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5022 | Nodeequipe | |||
| 1.3.6.1.4.1.5022.3 | IdentityeqSonetMib | This is the Equipe SONET MIB module. | ||
| 1.3.6.1.4.1.5022.3.1 | TableeqSonetApsCfgTable | not-accessible | current | This table contains aps config info for a sonet port. |
| 1.3.6.1.4.1.5022.3.1.1 | RoweqSonetApsCfgEntry | not-accessible | current | A sonet port aps config entry. |
| 1.3.6.1.4.1.5022.3.1.1.1 | ColumneqSonetApsCfgStatus | read-only | current | The current aps status for this sonet port. |
| 1.3.6.1.4.1.5022.3.1.1.2 | ColumneqSonetApsCfgAction | read-write | current | This object is used to perform an aps action on a sonet port. A read on this object always returns the value other(1). Setting this object to clear(2) causes t… |
| 1.3.6.1.4.1.5022.3.1.1.3 | ColumneqSonetApsCfgLastAction | read-only | current | This object indicates the last aps action requested on this port. |
| 1.3.6.1.4.1.5022.3.1.1.4 | ColumneqSonetApsCfgPortActive | read-only | current | This object is used to determine if the sts paths configured on this port are currrently actually terminated on this port. This is used to determine if the por… |
| 1.3.6.1.4.1.5022.3.2 | TableeqSonetPathTable | not-accessible | current | This table contains config info for a sonet port. |
| 1.3.6.1.4.1.5022.3.2.1 | RoweqSonetPathEntry | not-accessible | current | A sonet path config entry. |
| 1.3.6.1.4.1.5022.3.2.1.1 | ColumneqSonetPathActualPort | read-only | current | The ifIndex of the sonet port over which this path is actually running. Note that this value could be different from the sonet port that the sts path was origi… |
| 1.3.6.1.4.1.5022.3.3 | TableeqSonetStatsTable | not-accessible | current | This table contains stats for a sonet port. |
| 1.3.6.1.4.1.5022.3.3.1 | RoweqSonetStatsEntry | not-accessible | current | A sonet port stats entry. |
| 1.3.6.1.4.1.5022.3.3.1.1 | ColumneqSonetStatsIfIndex | read-only | current | The ifIndex for the corresponding sonet port. |
| 1.3.6.1.4.1.5022.3.3.1.2 | ColumneqSonetStatsLineFailures | read-only | current | The number of line failure events. A line failure is an AIS-L signal received from another NE, or received from the same NE when internally generating an AIS-L… |
| 1.3.6.1.4.1.5022.3.3.1.3 | ColumneqSonetStatsLineApsCount | read-only | current | The number of times the service has switched from the working to the protect line. |
| 1.3.6.1.4.1.5022.3.3.1.4 | ColumneqSonetStatsLineApsSwitchDuration | read-only | current | The number of seconds the service has been carried on the protection line. |
| 1.3.6.1.4.1.5022.3.3.1.5 | ColumneqSonetStatsLineStsPtrAdjustments | read-only | current | The count of STS pointer adjustments created or absorbed by an NE due to differences in the frame rates of the incoming and outgoing sonet signal. |
| 1.3.6.1.4.1.5022.3.3.1.6 | ColumneqSonetStatsPathFailures | read-only | current | The number of path failure events. A path failure is an AIS-P signal received from another NE, or received from the same NE when internally generating an AIS-P… |
| 1.3.6.1.4.1.5022.3.3.1.7 | ColumneqSonetStatsTimeElapsed | read-only | current | The number of seconds, including partial seconds, that have elapsed since the beginning of the current measurement period. If, for some reason, such as an adju… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| EqSonetApsCfgAction | INTEGER { other(1), clear(2), lockoutProtecting(3), forcedSwitchWorkingToProtecting(4), forcedSwitchProtectingToWorking(5), manualSwitchWorkingToProtecting(6), manualSwitchProtectingToWorking(7) } | current | Equipe sonet aps config action values. |
| EqSonetApsCfgStatus | INTEGER { none(1), working(2), protecting(3), lockoutProtecting(4), forcedSwitchWorkingToProtecting(5), forcedSwitchProtectingToWorking(6), manualSwitchWorkingToProtecting(7), manualSwitchProtectingToWorking(8) } | current | Equipe sonet aps config status values. |