ERI-DNX-SMC-MIB
228 objects
The ERI Enterprise MIB Module for the DNX System Manager.
Imported Objects
| ERI-ROOT-SMI | eriMibs eriProducts |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.644.2.0 | IdentityeriTrapEnterprise | current | ERI Global Trap Enterprise for Alarms/Events | |
| 1.3.6.1.4.1.644.2.0.1 | NotificationalarmTrap | current | This the generic trap is for sending alarms to NMS. | |
| 1.3.6.1.4.1.644.2.0.2 | NotificationdeleteResourceTrap | current | This trap is used to notify a NMS that a resource has been deleted. | |
| 1.3.6.1.4.1.644.2.4 | Nodednx | |||
| 1.3.6.1.4.1.644.2.4.0 | IdentitydnxTrapEnterprise | current | ERI DNX Trap Enterprise for Events | |
| 1.3.6.1.4.1.644.2.4.0.3 | NotificationconnectionEventTrap | current | This trap is used to notify a NMS that a connection has been changed, added, or deleted. | |
| 1.3.6.1.4.1.644.2.4.0.4 | NotificationconnMapMgrTrap | current | This trap is used to notify a NMS that a new connection map has been activated or that a connection map has been successfully copied to another inactive map. | |
| 1.3.6.1.4.1.644.2.4.0.6 | NotificationconnMapCopyTrap | current | This trap is used to notify a NMS that a user has copied all connections from a source map (lastMapCopied) to another destination map indicated by connMapID. | |
| 1.3.6.1.4.1.644.2.4.0.7 | NotificationbulkConnPurgeTrap | current | This trap is used to notify users that due to a change in device/port configuration, all connections affected by the changed resource have been purged. The Res… | |
| 1.3.6.1.4.1.644.2.4.0.10 | NotificationclockSrcChgTrap | current | This trap is used to notify a NMS that the system has detected a change in the Clock Source settings. These changes can result from either an automatic system … | |
| 1.3.6.1.4.1.644.2.4.0.13 | NotificationtrunkCondProfTrap | current | This trap is used to notify a NMS that the system has detected a change in the trunk Conditioning Profile settings. These changes are user configured. | |
| 1.3.6.1.4.1.644.2.4.0.14 | NotificationsystemEventTrap | current | This trap is used to notify a NMS that a generic event has occured in the system which is reported as a text message. | |
| 1.3.6.1.4.1.644.2.4.0.15 | NotificationtrapDestCfgTrap | current | This trap is used to notify a NMS that a user has updated the configuration for a given Trap Destination entry. | |
| 1.3.6.1.4.1.644.2.4.0.16 | NotificationfeatureKeyCfgTrap | current | This trap is used to notify a NMS that a user has added to or modified the configuration of the system Feature Keys. | |
| 1.3.6.1.4.1.644.2.4.1 | NodesysMgr | |||
| 1.3.6.1.4.1.644.2.4.1.1 | TableresourceTable | not-accessible | current | This table contain the resource information of the complete system. This table is the most complete single view of the system. |
| 1.3.6.1.4.1.644.2.4.1.1.1 | RowresourceEntry | not-accessible | current | The information about a resource. |
| 1.3.6.1.4.1.644.2.4.1.1.1.1 | ColumnresourceKey | read-only | current | This number uniquely identifies a system resource. This number will be used throughout the system to identify a resource. |
| 1.3.6.1.4.1.644.2.4.1.1.1.2 | ColumnresourceAddr | read-only | current | This is an ascii text version of the resource key. The strings have the general form of <letter>x.x.x... where the string x.x.x... is a string of some number o… |
| 1.3.6.1.4.1.644.2.4.1.1.1.3 | ColumnresourceType | read-only | current | This determines what kind of resource this is. |
| 1.3.6.1.4.1.644.2.4.1.1.1.4 | ColumnresourceState | read-only | current | Gives the state of the object. This is a bitmap whose exact meaning depends on the resource type. Bit zero refers to the rightmost bit. The following bits are … |
| 1.3.6.1.4.1.644.2.4.1.1.1.5 | ColumnresourceCriticalMask | read-only | current | This is the mask that identifies which bits in the state are critical alarms |
| 1.3.6.1.4.1.644.2.4.1.1.1.6 | ColumnresourceMajorMask | read-only | current | This is the mask that identifies which bits in the state are major alarms |
| 1.3.6.1.4.1.644.2.4.1.1.1.7 | ColumnresourceMinorMask | read-only | current | This is the mask that identifies which bits in the state are minor alarms |
| 1.3.6.1.4.1.644.2.4.1.1.1.8 | ColumnresourceInfoMask | read-only | current | This is the mask that identifies which bits in the state are informational alarms |
| 1.3.6.1.4.1.644.2.4.1.1.1.9 | ColumnresourceNominalMask | read-only | current | This is the mask that identifies which bits in the state are nominal alarms |
| 1.3.6.1.4.1.644.2.4.1.1.1.10 | ColumnresourceTrapMask | read-only | current | This is the mask that identifies which bits in the state are used to generate traps. |
| 1.3.6.1.4.1.644.2.4.1.2 | TableresourceAlarmTable | not-accessible | current | This table contain the resource information of the resourses that are in alarm. |
| 1.3.6.1.4.1.644.2.4.1.2.1 | RowresourceAlarmEntry | not-accessible | current | The information about a resource that is in alarm. |
| 1.3.6.1.4.1.644.2.4.1.2.1.1 | ColumnresourceAlarmKey | read-only | current | This number uniquely identifies a system resource. This number will be used throughout the system to identify a resource. This number is the same as resourceKey |
| 1.3.6.1.4.1.644.2.4.1.2.1.2 | ColumnresourceAlarmAddr | read-only | current | This is an ascii text version of the resource key. |
| 1.3.6.1.4.1.644.2.4.1.2.1.3 | ColumnresourceAlarmType | read-only | current | This determines what kind of resource this is. |
| 1.3.6.1.4.1.644.2.4.1.2.1.4 | ColumnresourceAlarmState | read-only | current | Gives the state of the object. This is a bitmap whose exact meaning depends on the resource type. See description for Resource State above. |
| 1.3.6.1.4.1.644.2.4.1.2.1.5 | ColumnresourceAlarmCriticalMask | read-only | current | This is the mask that identifies which bits in the state are critical alarms |
| 1.3.6.1.4.1.644.2.4.1.2.1.6 | ColumnresourceAlarmMajorMask | read-only | current | This is the mask that identifies which bits in the state are major alarms |
| 1.3.6.1.4.1.644.2.4.1.2.1.7 | ColumnresourceAlarmMinorMask | read-only | current | This is the mask that identifies which bits in the state are minor alarms |
| 1.3.6.1.4.1.644.2.4.1.2.1.8 | ColumnresourceAlarmInfoMask | read-only | current | This is the mask that identifies which bits in the state are informational alarms |
| 1.3.6.1.4.1.644.2.4.1.2.1.9 | ColumnresourceAlarmNominalMask | read-only | current | This is the mask that identifies which bits in the state are nominal alarms |
| 1.3.6.1.4.1.644.2.4.1.2.1.10 | ColumnresourceAlarmTrapMask | read-only | current | This is the mask that identifies which bits in the state are used to generate traps. |
| 1.3.6.1.4.1.644.2.4.1.6 | NodesysProfile | |||
| 1.3.6.1.4.1.644.2.4.1.6.1 | ScalarunitName | read-write | current | This is the user friendly name of this system. |
| 1.3.6.1.4.1.644.2.4.1.6.2 | ScalarunitType | read-only | current | This is the type of system node. dnx4 (1) Digital Access Cross-Connect System with 4 available device/application slots dnx11 (2) Digital Access Cross-Connect … |
| 1.3.6.1.4.1.644.2.4.1.6.3 | ScalaractiveSMC | read-only | current | This is the current ONLINE System Manager module. (A= top, B= bottom) |
| 1.3.6.1.4.1.644.2.4.1.6.4 | ScalarsystemRelease | read-only | current | In the form 'xx.yy' where x is the software version number followed by the release number y. |
| 1.3.6.1.4.1.644.2.4.1.6.5 | ScalarreleaseDate | read-only | current | The calendar date of Release x.xx above. |
| 1.3.6.1.4.1.644.2.4.1.6.6 | ScalarflashChksum | read-only | current | The current flash memory checksum result. |
| 1.3.6.1.4.1.644.2.4.1.6.7 | ScalarxilinxType | read-only | current | The type of xilinx chip used for the downloadable, programmable flash. |
| 1.3.6.1.4.1.644.2.4.1.6.8 | ScalarxilinxVersion | read-only | current | The current version of the xilinx chip used for the flash. |
| 1.3.6.1.4.1.644.2.4.1.6.9 | ScalarrearModem | read-only | current | Indicates the presence (yes) or non-presence (no) of the rear card modem. |
| 1.3.6.1.4.1.644.2.4.1.6.10 | ScalarmibProfile | read-only | current | The current SNMP Enterprise MIB Information for this release. The format of this string is 'VARIABLE=VALUE' and each pair is terminated by a colon. This object… |
| 1.3.6.1.4.1.644.2.4.1.6.11 | ScalarsystemMgrType | read-only | current | This is the hardware type of System Manager module. |
| 1.3.6.1.4.1.644.2.4.1.6.12 | ScalarsysAlarmCutOff | read-write | current | This toggles the ACO (Alarm Cut Off) switch. |
| 1.3.6.1.4.1.644.2.4.1.6.13 | ScalarsysMacAddress | read-only | current | Displays the system configured MAC Address in hexidecimal format. |
| 1.3.6.1.4.1.644.2.4.1.6.14 | ScalarsysSa4RxTxTrap | read-write | current | Provides the option to enable the Sa4-match trap to be sent to the NMS. |
| 1.3.6.1.4.1.644.2.4.1.6.15 | ScalarsysCustomerId | read-only | current | Unique code to identify the customer. |
| 1.3.6.1.4.1.644.2.4.1.6.16 | ScalarsysMgrOnlineTime | read-only | current | The time (in hundredths of a second) since the System Manager was declared ONLINE. |
| 1.3.6.1.4.1.644.2.4.1.6.100 | NodefeatureKeys | |||
| 1.3.6.1.4.1.644.2.4.1.6.100.1 | TablednxFeatureKeyTable | not-accessible | current | This is the DNX Feature Key Configuration table which consists of an entry for each of the DNX Feature Sets. The total number of entries depends on the number … |
| 1.3.6.1.4.1.644.2.4.1.6.100.1.1 | RowdnxFeatureKeyEntry | not-accessible | current | The conceptual row of the DNX Feature Key Configuration table. A row in this table cannot be added or deleted, only modified. |
| 1.3.6.1.4.1.644.2.4.1.6.100.1.1.1 | ColumnfeatureKeyId | read-only | current | The unique Feature Key index number. |
| 1.3.6.1.4.1.644.2.4.1.6.100.1.1.2 | ColumnfeatureKeyName | read-only | current | The text name describing the type of Feature. KeyId Feature Key Name Description 1. ADPCM Tcoder - Transcoder subsystem 2. Subrate Switching - High and Low Nib… |
| 1.3.6.1.4.1.644.2.4.1.6.100.1.1.3 | ColumnfeatureKeyState | read-write | current | Determines if the Feature is active or inactive. This can only be SET after the associated feature key has been entered. |
| 1.3.6.1.4.1.644.2.4.1.6.100.1.1.4 | ColumnfeatureKeyCmdStatus | read-write | current | The command status for this configuration row/record. The value used in a SET will be replaced by a response value in the GET RESPONSE indicating success or fa… |
| 1.3.6.1.4.1.644.2.4.1.6.100.2 | NodeenterNewFeatureKey | |||
| 1.3.6.1.4.1.644.2.4.1.6.100.2.1 | ScalarnewKeyCode | read-write | current | This represents the encrypted Feature Key code number that must be entered by an admistrator. Once entered successfully, the corresponding feature entries in t… |
| 1.3.6.1.4.1.644.2.4.1.6.100.2.2 | ScalarnewKeyCodeCmdStatus | read-write | current | The command status for this configuration row/record. The value used in a SET will be replaced by a response value in the GET RESPONSE indicating success or fa… |
| 1.3.6.1.4.1.644.2.4.1.7 | NodesysClock | |||
| 1.3.6.1.4.1.644.2.4.1.7.1 | NodesysDateTime | |||
| 1.3.6.1.4.1.644.2.4.1.7.1.1 | ScalarsysMonth | read-write | current | The current calendar month. |
| 1.3.6.1.4.1.644.2.4.1.7.1.2 | ScalarsysDay | read-write | current | The current calendar day in month. |
| 1.3.6.1.4.1.644.2.4.1.7.1.3 | ScalarsysYear | read-write | current | The current calendar year. |
| 1.3.6.1.4.1.644.2.4.1.7.1.4 | ScalarsysHour | read-write | current | The current military standard hour. |
| 1.3.6.1.4.1.644.2.4.1.7.1.5 | ScalarsysMin | read-write | current | The current system minutes. |
| 1.3.6.1.4.1.644.2.4.1.7.1.6 | ScalarsysSec | read-write | current | The current system seconds. |
| 1.3.6.1.4.1.644.2.4.1.7.1.7 | ScalarsysWeekday | read-write | current | The current calendar day of the week. |
| 1.3.6.1.4.1.644.2.4.1.7.1.8 | ScalarsysTimeCmdStatus | read-write | current | The command status for this system Date and Time. The value used in a SET will be replaced by a response value in the GET RESPONSE indicating success or failur… |
| 1.3.6.1.4.1.644.2.4.1.7.2 | NodeclockSrcConfig | |||
| 1.3.6.1.4.1.644.2.4.1.7.2.1 | ScalarclockSrcActive | read-only | current | This is the current clock source in use. |
| 1.3.6.1.4.1.644.2.4.1.7.2.2 | ScalarprimaryClockSrc | read-write | current | The Primary Clock Source slot/port address or Station Identifier. The format is represented using an IP address syntax (4 byte string) with the first byte unus… |
| 1.3.6.1.4.1.644.2.4.1.7.2.3 | ScalarsecondaryClockSrc | read-write | current | The Secondary Clock Source slot/port address or Station Identifier. The format is represented using an IP address syntax (4 byte string) with the first byte un… |
| 1.3.6.1.4.1.644.2.4.1.7.2.4 | ScalartertiaryClockSrc | read-write | current | The Tertiary Clock Source slot/port address or Station Identifier. The format is represented using an IP address syntax (4 byte string) with the first byte unu… |
| 1.3.6.1.4.1.644.2.4.1.7.2.5 | ScalarclockSrcMode | read-write | current | The configured system clock source fallback Mode. |
| 1.3.6.1.4.1.644.2.4.1.7.2.6 | ScalarclockSrcCmdStatus | read-write | current | The command status for this Clock Source configuration. The value used in a SET will be replaced by a response value in the GET RESPONSE indicating success or … |
| 1.3.6.1.4.1.644.2.4.1.8 | Nodeconnections | |||
| 1.3.6.1.4.1.644.2.4.1.8.1 | NodeconnInfo | |||
| 1.3.6.1.4.1.644.2.4.1.8.1.1 | ScalaractiveMapId | read-only | current | This is the ID number for current Connection Map. For details about each Connection Map, use the connMapTable entries. |
| 1.3.6.1.4.1.644.2.4.1.8.1.2 | ScalarconnDBChecksum | read-only | current | This is the Connection Database checksum which applies to all connections in all Maps. This number is calculated by taking the sum of the Connection Map versio… |
| 1.3.6.1.4.1.644.2.4.1.8.1.3 | ScalarlastMapCopied | read-only | current | This is the ID of the last Connection Map used as a source in a Connection Map copy operation to one or more destination maps. |
| 1.3.6.1.4.1.644.2.4.1.8.2 | TableconnMapTable | not-accessible | current | This is the Connection Map table which consists of 5 connection configuration map entries. |
| 1.3.6.1.4.1.644.2.4.1.8.2.1 | RowconnMapEntry | not-accessible | current | The conceptual row of the Connection Map table. A row in this table can not be created or deleted. A row in this table can be modified by providing valid value… |
| 1.3.6.1.4.1.644.2.4.1.8.2.1.1 | ColumnconnMapID | read-only | current | This number uniquely identifies a system connection map. |
| 1.3.6.1.4.1.644.2.4.1.8.2.1.2 | ColumnconnMapName | read-write | current | This is the textual name of a specific connection configuration map. The length can be from 1 to 11 characters. |
| 1.3.6.1.4.1.644.2.4.1.8.2.1.3 | ColumnconnMapCurrStatus | read-write | current | This indicates the current status for a connection map. Only one map can be active at a given time. active (1) - The current active map non-active (2) - The Ma… |
| 1.3.6.1.4.1.644.2.4.1.8.2.1.4 | ColumnconnMapDescription | read-write | current | This is the textual description of the connection configuration map. The length can be from 1 to 20 characters. |
| 1.3.6.1.4.1.644.2.4.1.8.2.1.5 | ColumnconnMapCounts | read-only | current | This is the number of system connections configured and saved in this map. |
| 1.3.6.1.4.1.644.2.4.1.8.2.1.6 | ColumnconnMapVersions | read-only | current | This is the current version number for this map. Each time the map is permanently saved, the version number will be incremented by 1. |
| 1.3.6.1.4.1.644.2.4.1.8.2.1.7 | ColumnconnMapDate | read-only | current | This is the calendar date of the last time a configuration change was saved to this map. |
| 1.3.6.1.4.1.644.2.4.1.8.2.1.8 | ColumnconnMapCmdStatus | read-write | current | The command status for this connection map configuration row/record. The value used in a SET will be replaced by a response value in the GET RESPONSE indicatin… |
| 1.3.6.1.4.1.644.2.4.1.8.2.1.9 | ColumnconnMapChecksum | read-only | current | This is the checksum for the system connection map. |
| 1.3.6.1.4.1.644.2.4.1.8.3 | TablesysConnTable | not-accessible | current | This is the system Connection table which consists of connection entries from all available configuration maps. There are 5 seperate connection maps but only o… |
| 1.3.6.1.4.1.644.2.4.1.8.3.1 | RowsysConnEntry | not-accessible | current | The conceptual row of the system Connection table. A row in this table can NOT be created. A row in this table can be modified by providing valid values for on… |
| 1.3.6.1.4.1.644.2.4.1.8.3.1.1 | ColumnsysMapID | read-only | current | This number uniquely identifies a system connection map. This number will be used in conjunction with the connection ID to uniquely identify a connection. |
| 1.3.6.1.4.1.644.2.4.1.8.3.1.2 | ColumnsysConnID | read-only | current | This number uniquely identifies a connection within a given configuration map. This number will be used in conjunction with the map ID to uniquely identify a s… |
| 1.3.6.1.4.1.644.2.4.1.8.3.1.3 | ColumnsysConnName | read-write | current | This is the textual description of a connection within a given configuration map. The length can be from 1 to 20 characters. |
| 1.3.6.1.4.1.644.2.4.1.8.3.1.4 | ColumnsysConnType | read-only | current | The connection type for this system connection. fullDuplex (0) Bi-directional connection from Source port to Destination port and vice-versa. broadcastConnecti… |
| 1.3.6.1.4.1.644.2.4.1.8.3.1.5 | ColumnsysSrcAddr | read-only | current | The source port timeslot address for this connection. The format is represented using an IP address syntax (4 byte string). Note that the maximum valid port nu… |
| 1.3.6.1.4.1.644.2.4.1.8.3.1.6 | ColumnsysDestAddr | read-only | current | The destination port timeslot address for this connection. The format is represented using an IP address syntax (4 byte string). Note that the maximum valid po… |
| 1.3.6.1.4.1.644.2.4.1.8.3.1.7 | ColumnsysComm | read-write | current | The type of communications utilized on this system connection. data (0) Data only voice (1) Voice only voiceAuToMu (2) Voice with Au-law to Mu-law Conversion T… |
| 1.3.6.1.4.1.644.2.4.1.8.3.1.8 | ColumnsysConnSpeed | read-write | current | The data transmission speed in kilobytes per second (kbps) for this connection. The format is: -Speed in kbps-number of DS0-kbps per channel s48k (0) - 48k (1 … |
| 1.3.6.1.4.1.644.2.4.1.8.3.1.9 | ColumnsysSrcTsBitmap | read-write | current | This is a bit field used for the source port timeslots. Each bit represents a link timeslot on the source port. Setting the bit indicates that timeslot is used… |
| 1.3.6.1.4.1.644.2.4.1.8.3.1.10 | ColumnsysDestTsBitmap | read-write | current | This is a bit field used for the destination port timeslots. Each bit represents a link timeslot on the destination port. Setting the bit indicates that timesl… |
| 1.3.6.1.4.1.644.2.4.1.8.3.1.11 | ColumnsysBroadSrcId | read-only | current | The connection ID number of the broadcast source connection for a listener connection to read from. |
| 1.3.6.1.4.1.644.2.4.1.8.3.1.12 | ColumnsysTestMode | read-only | obsolete | This indicates whether the current connection is in test mode, and if so, the type of test access being used. none (0) Connection has no active Tests monitorSr… |
| 1.3.6.1.4.1.644.2.4.1.8.3.1.13 | ColumnsysCmdStatus | read-write | current | The command status for this system connection row/record. The value used in a SET will be replaced by a response value in the GET RESPONSE indicating success o… |
| 1.3.6.1.4.1.644.2.4.1.8.3.1.14 | ColumnsysPrimaryState | read-only | current | The Primary level state of this system connection. inSrvc (0) In Service outOfSrvc (1) Not in Service |
| 1.3.6.1.4.1.644.2.4.1.8.3.1.15 | ColumnsysSecondaryState | read-only | current | The Secondary level state of this system connection. none (0) Default OOS state ok (1) Operational underTest (2) Under Test Mode |
| 1.3.6.1.4.1.644.2.4.1.8.3.1.16 | ColumnsysConnInstance | read-only | current | This is the current instance number for this connection record. Each time the connection is changed, the instance number will be changed. |
| 1.3.6.1.4.1.644.2.4.1.8.3.1.17 | ColumnsysConnChecksum | read-only | current | This is the checksum this connection record. |
| 1.3.6.1.4.1.644.2.4.1.8.3.1.18 | ColumnsysSrcTsLineType | read-only | current | Determines the Source Port Timeslot Type used when building DNX Cross-Connections. unknown (0) Not Available or unknown e1 (1) 31 Ts available numbered 1..31 w… |
| 1.3.6.1.4.1.644.2.4.1.8.3.1.19 | ColumnsysDestTsLineType | read-only | current | Determines the Dest Port Timeslot Type used when building DNX Cross-Connections. unknown (0) Not Available or unknown e1 (1) 31 Ts available numbered 1..31 w/ … |
| 1.3.6.1.4.1.644.2.4.1.8.3.1.20 | ColumnsysSrcTrunkCProfile | read-write | current | This identifies the Trunk Conditioning Profile selection for the source port. |
| 1.3.6.1.4.1.644.2.4.1.8.3.1.21 | ColumnsysDestTrunkCProfile | read-write | current | This identifies the Trunk Conditioning Profile selection for the destination port. |
| 1.3.6.1.4.1.644.2.4.1.8.4 | TableactvConnTable | not-accessible | current | This is the Active Map Connection table which consists of connection entries from the active configuration map. There are 5 seperate connection maps but only o… |
| 1.3.6.1.4.1.644.2.4.1.8.4.1 | RowactvConnEntry | not-accessible | current | The conceptual row of the system Connection table. A row in this table can NOT be created. A row in this table can be modified by providing valid values for on… |
| 1.3.6.1.4.1.644.2.4.1.8.4.1.1 | ColumnactvMapID | read-only | current | This number uniquely identifies the Active connection map. |
| 1.3.6.1.4.1.644.2.4.1.8.4.1.2 | ColumnactvConnID | read-only | current | This number uniquely identifies an Active Map connection. |
| 1.3.6.1.4.1.644.2.4.1.8.4.1.3 | ColumnactvConnName | read-write | current | This is the textual description of a connection within a given configuration map. The length can be from 1 to 20 characters. |
| 1.3.6.1.4.1.644.2.4.1.8.4.1.4 | ColumnactvConnType | read-only | current | The connection type for this system connection. fullDuplex (0) Bi-directional connection from Source port to Destination port and vice-versa. broadcastConnecti… |
| 1.3.6.1.4.1.644.2.4.1.8.4.1.5 | ColumnactvSrcAddr | read-only | current | The source port timeslot address for this connection. The format is represented using an IP address syntax (4 byte string). Note that the maximum valid port nu… |
| 1.3.6.1.4.1.644.2.4.1.8.4.1.6 | ColumnactvDestAddr | read-only | current | The destination port timeslot address for this connection. The format is represented using an IP address syntax (4 byte string). Note that the maximum valid po… |
| 1.3.6.1.4.1.644.2.4.1.8.4.1.7 | ColumnactvComm | read-write | current | The type of communications utilized on this system connection. data (0) Data only voice (1) Voice only voiceAuToMu (2) Voice with Au-law to Mu-law Conversion T… |
| 1.3.6.1.4.1.644.2.4.1.8.4.1.8 | ColumnactvConnSpeed | read-write | current | The data transmission speed in kilobytes per second (kbps) for this connection. The format is: -Speed in kbps-number of DS0-kbps per channel s48k (0) - 48k (1 … |
| 1.3.6.1.4.1.644.2.4.1.8.4.1.9 | ColumnactvSrcTsBitmap | read-write | current | This is a bit field used for the source port timeslots. Each bit represents a link timeslot on the source port. Setting the bit indicates that timeslot is used… |
| 1.3.6.1.4.1.644.2.4.1.8.4.1.10 | ColumnactvDestTsBitmap | read-write | current | This is a bit field used for the destination port timeslots. Each bit represents a link timeslot on the destination port. Setting the bit indicates that timesl… |
| 1.3.6.1.4.1.644.2.4.1.8.4.1.11 | ColumnactvBroadSrcId | read-only | current | The connection ID number of the broadcast source connection for a listener connection to read from. |
| 1.3.6.1.4.1.644.2.4.1.8.4.1.12 | ColumnactvTestMode | read-only | obsolete | This indicates whether the current connection is in test mode, and if so, the type of test access being used. none (0) Connection has no active Tests monitorSr… |
| 1.3.6.1.4.1.644.2.4.1.8.4.1.13 | ColumnactvCmdStatus | read-write | current | The command status for this system connection row/record. The value used in a SET will be replaced by a response value in the GET RESPONSE indicating success o… |
| 1.3.6.1.4.1.644.2.4.1.8.4.1.14 | ColumnactvPrimaryState | read-only | current | The Primary level state of this system connection. inSrvc (0) In Service outOfSrvc (1) Not in Service |
| 1.3.6.1.4.1.644.2.4.1.8.4.1.15 | ColumnactvSecondaryState | read-only | current | The Secondary level state of this system connection. none (0) Default OOS state ok (1) Operational underTest (2) Under Test Mode |
| 1.3.6.1.4.1.644.2.4.1.8.4.1.16 | ColumnactvConnInstance | read-only | current | This is the current instance number for this connection record. Each time the connection is changed, the instance number will be changed. |
| 1.3.6.1.4.1.644.2.4.1.8.4.1.17 | ColumnactvConnChecksum | read-only | current | This is the checksum this connection record. |
| 1.3.6.1.4.1.644.2.4.1.8.4.1.18 | ColumnactvSrcTsLineType | read-only | current | Determines the Source Port Timeslot Type used when building DNX Cross-Connections. unknown (0) Not Available or unknown e1 (1) 31 Ts available numbered 1..31 w… |
| 1.3.6.1.4.1.644.2.4.1.8.4.1.19 | ColumnactvDestTsLineType | read-only | current | Determines the Dest Port Timeslot Type used when building DNX Cross-Connections. unknown (0) Not Available or unknown e1 (1) 31 Ts available numbered 1..31 w/ … |
| 1.3.6.1.4.1.644.2.4.1.8.4.1.20 | ColumnactvSrcTrunkCProfile | read-write | current | This identifies the Trunk Conditioning Profile selection for the source port. |
| 1.3.6.1.4.1.644.2.4.1.8.4.1.21 | ColumnactvDestTrunkCProfile | read-write | current | This identifies the Trunk Conditioning Profile selection for the destination port. |
| 1.3.6.1.4.1.644.2.4.1.8.5 | NodeaddConnRecord | |||
| 1.3.6.1.4.1.644.2.4.1.8.5.1 | ScalaraddMapID | read-write | current | This number identifies the connection map where the new Connection is to be added. A value of zero will cause the system to add the connection to the current a… |
| 1.3.6.1.4.1.644.2.4.1.8.5.2 | ScalaraddConnID | read-write | current | This number defaults to connection ID zero, which if used in a SET PDU, notifies the system to find and use the next available Connection ID. If this number is… |
| 1.3.6.1.4.1.644.2.4.1.8.5.3 | ScalaraddConnName | read-write | current | This is the textual description of a connection within a given configuration map. This name is optional and will be generated by the system if not provided in … |
| 1.3.6.1.4.1.644.2.4.1.8.5.4 | ScalaraddConnType | read-write | current | The connection type for this system connection. fullDuplex (0) Bi-directional connection from Source port to Destination port and vice-versa. broadcastConnecti… |
| 1.3.6.1.4.1.644.2.4.1.8.5.5 | ScalaraddSrcAddr | read-write | current | The source port timeslot address for this new connection. The format is represented using an IP address syntax (4 byte string). Note that the maximum valid por… |
| 1.3.6.1.4.1.644.2.4.1.8.5.6 | ScalaraddDestAddr | read-write | current | The destination port timeslot address for this new connection. The format is represented using an IP address syntax (4 byte string). Note that the maximum vali… |
| 1.3.6.1.4.1.644.2.4.1.8.5.7 | ScalaraddComm | read-write | current | The type of communications utilized on this system connection. data (0) Data only voice (1) Voice only voiceAuToMu (2) Voice with Au-law to Mu-law Conversion T… |
| 1.3.6.1.4.1.644.2.4.1.8.5.8 | ScalaraddConnSpeed | read-write | current | The data transmission speed in kilobytes per second (kbps) for this connection. The format is: -Speed in kbps-number of DS0-kbps per channel s48k (0) - 48k (1 … |
| 1.3.6.1.4.1.644.2.4.1.8.5.9 | ScalaraddSrcTsBitmap | read-write | current | This is a bit field used for the source port timeslots. Each bit represents a link timeslot on the source port. Setting the bit indicates that timeslot is used… |
| 1.3.6.1.4.1.644.2.4.1.8.5.10 | ScalaraddDestTsBitmap | read-write | current | This is a bit field used for the destination port timeslots. Each bit represents a link timeslot on the destination port. Setting the bit indicates that timesl… |
| 1.3.6.1.4.1.644.2.4.1.8.5.11 | ScalaraddBroadSrcId | read-write | current | The connection ID number of the broadcast source connection for a listener connection to read from. |
| 1.3.6.1.4.1.644.2.4.1.8.5.12 | ScalaraddTestMode | read-only | current | This indicates whether the current connection is in test mode, and if so, the type of test access being used. none (0) Connection has no active Tests monitorSr… |
| 1.3.6.1.4.1.644.2.4.1.8.5.13 | ScalaraddCmdStatus | read-write | current | The command status for this system connection row/record. The value used in a SET will be replaced by a response value in the GET RESPONSE indicating success o… |
| 1.3.6.1.4.1.644.2.4.1.8.5.14 | ScalaraddSrcTrunkCProfile | read-write | current | This identifies the hex value used for the start of signaling. The valid values are in hex format 0 through f. |
| 1.3.6.1.4.1.644.2.4.1.8.5.15 | ScalaraddDestTrunkCProfile | read-write | current | This identifies the hex value used for the end of signaling. The valid values are in hex format 0 through f. |
| 1.3.6.1.4.1.644.2.4.1.8.6 | TabletrunkCProfileTable | not-accessible | current | This is the Trunk Conditioning Profile table which consists of 16 entries of configured signaling data profiles. |
| 1.3.6.1.4.1.644.2.4.1.8.6.1 | RowtrunkCProfileEntry | not-accessible | current | The conceptual row of the Trunk Conditioning Profile table. A row in this table can NOT be created. A row in this table can be modified by providing valid valu… |
| 1.3.6.1.4.1.644.2.4.1.8.6.1.1 | ColumntrunkProfileID | read-only | current | This number uniquely identifies a Trunk Conditioning Profile. |
| 1.3.6.1.4.1.644.2.4.1.8.6.1.2 | ColumntrunkSignalStart | read-write | current | Identifies the hex value used for the start of signaling. The valid values are 0 through f in Hex format. |
| 1.3.6.1.4.1.644.2.4.1.8.6.1.3 | ColumntrunkSignalEnd | read-write | current | Identifies the hex value used for the end of signaling.The valid values are 0 through f in Hex format. |
| 1.3.6.1.4.1.644.2.4.1.8.6.1.4 | ColumntrunkData | read-write | current | Identifies the hex value used for the data.The valid values are 0 through ff in Hex format. |
| 1.3.6.1.4.1.644.2.4.1.8.6.1.5 | ColumntrunkCmdStatus | read-write | current | The command status for this configuration row/record. The value used in a SET will be replaced by a response value in the GET RESPONSE indicating success or fa… |
| 1.3.6.1.4.1.644.2.4.1.12 | Nodeutilities | |||
| 1.3.6.1.4.1.644.2.4.1.12.1 | Nodedatabase | |||
| 1.3.6.1.4.1.644.2.4.1.12.1.1 | NodedbBackup | |||
| 1.3.6.1.4.1.644.2.4.1.12.1.1.1 | ScalardbAutoBackup | read-write | current | Enables or disables the Automatic Backup utility. |
| 1.3.6.1.4.1.644.2.4.1.12.1.1.2 | ScalardbBackupOccurrence | read-write | current | The frequency mode of the DB backup schedule. |
| 1.3.6.1.4.1.644.2.4.1.12.1.1.3 | ScalardbBackupDayOfWeek | read-write | current | The day of the week for weekly backups to execute. If the dbBackupOccurance is set to 'daily', this field is ignored by the Backup utility. |
| 1.3.6.1.4.1.644.2.4.1.12.1.1.4 | ScalardbBackupHour | read-write | current | The configured hour for backups to execute. Hours should be entered using 24 hour format. |
| 1.3.6.1.4.1.644.2.4.1.12.1.1.5 | ScalardbBackupMin | read-write | current | The configured minute for backups to execute. |
| 1.3.6.1.4.1.644.2.4.1.12.1.1.10 | TabledbRemoteHostTable | not-accessible | current | This is the Database Backup & Restore Remote Host table which consists of an entry for each of the 3 supported DB backup Host locations. Changes to the dbRemot… |
| 1.3.6.1.4.1.644.2.4.1.12.1.1.10.1 | RowdbRemoteHostTableEntry | not-accessible | current | The conceptual row of the Database Backup & Restore Remote Host table. A row in this table can not be created or deleted. A row in this table can be modified u… |
| 1.3.6.1.4.1.644.2.4.1.12.1.1.10.1.1 | ColumndbHostIndex | read-only | current | The remote Host index number. |
| 1.3.6.1.4.1.644.2.4.1.12.1.1.10.1.2 | ColumndbHostIp | read-write | current | The IP Address of the remote host where the backup file will be saved or restored from. |
| 1.3.6.1.4.1.644.2.4.1.12.1.1.10.1.3 | ColumndbHostDirectory | read-write | current | The directory path of the backup file on the remote host. |
| 1.3.6.1.4.1.644.2.4.1.12.1.1.10.1.4 | ColumndbHostFilename | read-write | current | The filename of the backup file on the remote host. |
| 1.3.6.1.4.1.644.2.4.1.12.1.1.10.1.5 | ColumndbHostCmdStatus | read-write | current | The command status for this remote host configuration row/record. The value used in a SET will be replaced by a response value in the GET RESPONSE indicating s… |
| 1.3.6.1.4.1.644.2.4.2 | Nodedevices | |||
| 1.3.6.1.4.1.644.2.4.3 | Nodetraps | |||
| 1.3.6.1.4.1.644.2.4.3.1 | ScalartrapSequence | read-only | current | A number used to identify the last generated trap message. This is also included in each Trap PDU to help allow the NMS to realize if a trap has been missed. |
| 1.3.6.1.4.1.644.2.4.3.2 | ScalartrapResourceKey | accessible-for-notify | current | This is a number that uniquely identifies a system resource. Much in the line of ifIndex. |
| 1.3.6.1.4.1.644.2.4.3.3 | ScalartrapTime | accessible-for-notify | current | The time as (HH:MM:SS MM/DD/YY) |
| 1.3.6.1.4.1.644.2.4.3.4 | ScalartrapResourceAddress | accessible-for-notify | current | This is the address of the ultimate source of the trap. |
| 1.3.6.1.4.1.644.2.4.3.5 | ScalartrapResourceType | accessible-for-notify | current | This identifies what the trapAddress is the address of. |
| 1.3.6.1.4.1.644.2.4.3.6 | ScalartrapType | accessible-for-notify | current | This is the specific Trap Code that represents the type of alarm or event that occurred. Each alarm type has a code that sets the trap as active and a correspo… |
| 1.3.6.1.4.1.644.2.4.3.7 | ScalartrapState | accessible-for-notify | current | This is the current status of the resource reporting the trap. |
| 1.3.6.1.4.1.644.2.4.3.8 | ScalartrapSeverity | accessible-for-notify | current | The importance of the trap event. nominal (0) Normal message, not used. informational (1) Informative message, not an error. minor (2) Error that serves as a w… |
| 1.3.6.1.4.1.644.2.4.3.9 | ScalartrapSysEvent | accessible-for-notify | current | This is the text message from the resource reporting the trap. |
| 1.3.6.1.4.1.644.2.4.3.20 | NodetrapCfg | |||
| 1.3.6.1.4.1.644.2.4.3.20.1 | TabletrapDestinationTable | not-accessible | current | This is the Trap Client Destination table which consists of an entry for each of the supported trap destinations. Changes to the trapDestinationTable must be m… |
| 1.3.6.1.4.1.644.2.4.3.20.1.1 | RowtrapDestinationEntry | not-accessible | current | The conceptual row of the Trap Client Destination table. A row in this table can be added by providing a valid trapDestAddr value along with the trapDestCmdSta… |
| 1.3.6.1.4.1.644.2.4.3.20.1.1.1 | ColumntrapDestAddr | read-write | current | The Trap Destination IP Address where all Trap PDUs are sent for this Client. |
| 1.3.6.1.4.1.644.2.4.3.20.1.1.2 | ColumntrapDestName | read-write | current | The Trap Destination Community String which is included in all Trap PDUs sent to this Client. |
| 1.3.6.1.4.1.644.2.4.3.20.1.1.3 | ColumntrapDestCmdStatus | read-write | current | The command status for this trap dest configuration row/record. The value used in a SET will be replaced by a response value in the GET RESPONSE indicating suc… |
| 1.3.6.1.4.1.644.2.4.3.20.1.1.4 | ColumntrapDestPduType | read-write | current | The message format for all traps sent to the Trap Destination. |
| 1.3.6.1.4.1.644.2.4.3.20.1.1.5 | ColumntrapDestMaxRetry | read-write | current | The number of times to attempt to retransmit the Trap message to the Client before discarding it. |
| 1.3.6.1.4.1.644.2.4.3.20.1.1.6 | ColumntrapDestTimeout | read-write | current | The number of seconds between retries. |
| 1.3.6.1.4.1.644.3.1 | IdentityeriDNXSmcMIB | The ERI Enterprise MIB Module for the DNX System Manager. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AlarmSeverity | INTEGER { nominal(0), informational(1), minor(2), major(3), critical(4) } | current | Determines the Trap Alarm level. |
| ClockSrcAddress | IpAddress | current | Used for slot, port, & station clock configuration. |
| CommunicationsType | INTEGER { data(0), voice(1), voiceAuToMu(2), comp16kBitGrp1-2(3), comp16kBitGrp3-4(4), comp16kBitGrp5-6(5), comp16kBitGrp7-8(6), comp32kBitGrp1-4(7), comp32kBitGrp5-8(8) } | current | Determines the type of circuit communication format. |
| ConnCmdStatus | INTEGER { ready-for-command (0), update (1), delete (2), add (3), addNsave (4), updateNsave (5), deleteNsave (6), update-successful (101), delete-successful (102), add-successful (103), add-save-successful (104), update-save-successful (105), del-save-successful (106), err-general-connection-error (400), err-src-broadcast-id-not-found (401), err-src-port-in-use (402), err-dest-port-in-use (403), err-conn-name-in-use (404), err-invalid-broadcast-id (405), err-invalid-src-slot (406), err-invalid-src-port (407), err-invalid-src-timeslot (408), err-src-port-bandwidth-exceeded (409), err-invalid-dest-slot (410), err-invalid-dest-port (411), err-invalid-dest-timeslot (412), err-dest-port-bandwidth-exceeded (413), err-invalid-command (414), err-not-enough-bts-available(415), err-src-port-cannot-be-voice(416), err-dest-port-cannot-be-voice(417), err-invalid-communications-dev(418), err-invalid-communications-type(419), err-invalid-conn-name(420), err-invalid-conn-type(421), err-invalid-conn-speed(422), err-invalid-conn-record(423), err-conn-test-in-progress(424), err-invalid-conn-id(425), err-conn-not-saved-to-map(426), err-connection-map-full (427), err-invalid-card-type (428), err-invalid-conn-bit-group (429), err-conn-max-channels-used (430), err-src-xlink-slot-not-assigned(431), err-dest-xlink-slot-not-assigned(432), err-protection-grp-conn-error (433), err-cannot-chg-net-conn (434), err-data-locked-by-another-user(450), err-snmp-parse-failed (500), err-invalid-snmp-type (501), err-invalid-snmp-var-size (502) } | current | Determines the command action or response status for a connection record/row. |
| ConnectionSpeed | INTEGER { s48k (0), s56k (1), s64k (2), s112k-2x56 (3), s128k-2x64 (4), s168k-3x56 (5), s192k-3x64 (6), s224k-4x56 (7), s256k-4x64 (8), s280k-5x56 (9), s320k-5x64 (10), s336k-6x56 (11), s384k-6x64 (12), s392k-7x56 (13), s448k-7x64 (14), s448k-8x56 (15), s512k-8x64 (16), s504k-9x56 (17), s576k-9x64 (18), s560k-10x56 (19), s640k-10x64 (20), s616k-11x56 (21), s704k-11x64 (22), s672k-12x56 (23), s768k-12x64 (24), s728k-13x56 (25), s832k-13x64 (26), s784k-14x56 (27), s896k-14x64 (28), s840k-15x56 (29), s960k-15x64 (30), s896k-16x56 (31), s1024k-16x64 (32), s952k-17x56 (33), s1088k-17x64 (34), s1008k-18x56 (35), s1152k-18x64 (36), s1064k-19x56 (37), s1216k-19x64 (38), s1120k-20x56 (39), s1280k-20x64 (40), s1176k-21x56 (41), s1344k-21x64 (42), s1232k-22x56 (43), s1408k-22x64 (44), s1288k-23x56 (45), s1472k-23x64 (46), s1344k-24x56 (47), s1536k-24x64 (48), s1400k-25x56 (49), s1600k-25x64 (50), s1456k-26x56 (51), s1664k-26x64 (52), s1512k-27x56 (53), s1728k-27x64 (54), s1568k-28x56 (55), s1792k-28x64 (56), s1624k-29x56 (57), s1856k-29x64 (58), s1680k-30x56 (59), s1920k-30x64 (60), s1736k-31x56 (61), s1984k-31x64 (62), s1792k-32x56 (63), s2048k-32x64 (64), clearT1-25x64 (65), clearE1-32x64 (66), s32k (67), s16k (68), s9600-baud(96), no-connection (99) } | current | Determines the bandwidth on a circuit connection. |
| ConnectionState1 | INTEGER { inSrvc(0), outOfSrvc(1) } | current | Determines the primary state level of circuit connection. |
| ConnectionState2 | INTEGER { ok(1), underTest(2), cfgError(3) } | current | Determines the secondary state level of circuit connection. |
| ConnectionType | INTEGER { fullDuplex(0), broadcastConnection(1), broadcastMaster(2), listenSrc(3), listenDest(4), listenerConnection(7), vcmp(8), subChannel(9), subRate(10) } | current | Determines the type of circuit connection. The fullDuplex and broadcastConnection require both a source and destination port. The broadcastMaster needs only a source port and the listeners need only a dest port. |
| CurrentDevStatus | INTEGER { inactive (0), active (1) } | current | Determines if a device is on/off. |
| DataSwitch | INTEGER { off (0), on (1) } | current | Determines if a setting is on/off. |
| DecisionType | INTEGER { no (0), yes (1) } | current | Determines if a setting is on/off. |
| DnxResourceType | INTEGER { slot(0), deviceOctalE1T1(1), deviceQuadHighSpeed(2), deviceOctalHighSpeed(3), deviceQuadOcu(4), deviceSystemManager(5), deviceQuadT1(6), deviceT3(7), deviceTestAccess(8), deviceVoice(9), deviceVoiceEM(10), deviceVoiceFXO(11), deviceVoiceFXS(12), powerSupply(14), protectionSwitch(15), deviceRouterCard(16), deviceSts1(17), deviceHybridDS3(18), deviceGr303(19), deviceXCC(20), deviceXLC(21), deviceNodeManager(22), nest(23), node(24), deviceDs0DP(25), deviceSTM1(26), deviceOC3(27), deviceE3(28), deviceXLC-T1E1(29), deviceSTM1X(30), deviceOC3X(31), deviceContact(32), deviceVoltage(33), deviceAsync(34), deviceSync(35), deviceWan(36), dnx1UQuadT1E1(37), deviceTempSensor(38), dnx1UPowerSupply(39), dnx1USysMgr(40), deviceTranscoder(41), portOctal-T1E1(100), portQuadHighSpeed(101), portOctalHighSpeed(102), portQuadOcu(103), portQuadT1(104), portOctalT1(105), linkT3-T1(106), portT3(107), portTestAccess(108), portVoiceEM(109), portVoiceFXO(110), portVoiceFXS(111), psxNarrowband (112), psxBroadband(113), psxNarrowbandSpare(114), psxBroadbandSpare(115), portRouter(116), linkSts1-T1E1(117), portSts1(118), linkHds3-T1E1(119), portHybridDS3(120), portGr303(121), linkXlink(124), portDs0DP(125), clockDs0DP(126), sysMgrClock(127), linkSTM1-T1E1(128), linkOC3-T1E1(130), payloadSTM1(131), overheadSTM1(132), payloadOC3(133), overheadOC3(134), portE3(135), linkE3-E1(136), opticalXlink(137), portContact(138), portVoltage(139), portAsync(140), linkT1E1(141), portHighSpeed(142), portVirtualWan(143), portTranscoder(144) } | current | Unique code used to identify a system resource. |
| DnxTrunkProfSelection | INTEGER { none(0), profile-1(1), profile-2(2), profile-3(3), profile-4(4), profile-5(5), profile-6(6), profile-7(7), profile-8(8), profile-9(9), profile-10(10), profile-11(11), profile-12(12), profile-13(13), profile-14(14), profile-15(15), profile-16(16) } | current | Displays the Trunk Conditioning Profile used to add or display a connection. |
| DnxTsPortType | INTEGER { unknown(0), e1(1), t1(2), high-speed(3), wan(4), e1-cas(5), e1-clear-frm(6), t1-clear-frm(7), e1-clear-unfrm(8), t1-clear-unfrm(9), voice(10), ds0dp(11), ocu(12), tam(13) } | current | Displays the Port Timeslot Type used when building DNX Cross-Connections. |
| FunctionSwitch | INTEGER { disable (0), enable (1) } | current | Determines if a functionality is on/off. |
| LinkCmdStatus | INTEGER { ready-for-command (0), update (1), inServiceAll (7), copyToAll (9), outOfServiceAll (12), update-successful (101), insvc-successful (107), copy-successful (109), oos-successful (112), err-general-link-config-error (400), err-invalid-link-status (401), err-invalid-link-framing (402), err-invalid-link-command (403), err-invalid-link-lbo (404), err-invalid-esf-format (405), err-invalid-link-density (406), err-invalid-link-op-mode (407), err-invalid-link-rem-loop (408), err-invalid-link-ais (409), err-invalid-network-loop (410), err-invalid-yellow-alarm (411), err-invalid-red-timeout (412), err-invalid-idle-code (413), err-device-in-standby (414), err-invalid-link-mapping (415), err-invalid-link-vt-group (416), err-invalid-rcv-clocksrc (417), err-invalid-link-name (418), err-invalid-interface (419), err-invalid-polarity (420), err-invalid-clock-timing (421), err-invalid-control-signal (422), err-dcd-dsr-not-applicable (423), err-requires-special-mode (424), err-cts-not-applicable (425), err-gr303-not-applicable (426), err-invalid-link-bits (427), err-device-is-protection-module (428), err-data-locked-by-another-user (450), err-snmp-parse-failed (500), err-invalid-snmp-type (501), err-invalid-snmp-var-size (502) } | current | Determines the command action or response status for a link(port) record/row. |
| LinkPortAddress | IpAddress | current | Used for nest, slot, & port/channel numbers. |
| MapNumber | INTEGER { activeMap (0), map01 (1), map02 (2), map03 (3), map04 (4), map05 (5) } | current | Identifies the system connection maps. |
| NestSlotAddress | IpAddress | current | Used for nest & slot numbers. |
| OneByteField | OCTET STRING (SIZE(1)) | current | Used for single byte bit manipulation fields. |
| PortStatus | INTEGER { out-service (0), in-service (1) } | current | Determines if a port/link is active or not. |
| TestAccess | INTEGER { none (0), monitorSrc(1), monitorDest(2), monitorSrcNDest(3), splitSrc(4), splitDest(5), splitSrcNDest(6) } | current | Determines the type of test connection is on the circuit. |
| TimeSlotAddress | IpAddress | current | Used for slot, port, & starting timeslot numbers. |
| UnsignedInt | Unsigned32 | current | Used for defining numbers used as bit masks. |