ERICSSON-ELN-MIB
118 objects
This MIB module defines ELN parameters for: Network Processor, Main Board, Mezzanine Boards, Host Processor, Ethernet Ports, VLAN, QOS and IGMP
Imported Objects
| ERICSSON-ELN-SMI | eln |
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Gauge32 Integer32 IpAddress mib-2 MODULE-IDENTITY OBJECT-TYPE TimeTicks |
| SNMPv2-TC | AutonomousType DateAndTime DisplayString PhysAddress RowStatus TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.193.109.1 | IdentityelnMIB | This MIB module defines ELN parameters for: Network Processor, Main Board, Mezzanine Boards, Host Processor, Ethernet Ports, VLAN, QOS and IGMP | ||
| 1.3.6.1.4.1.193.109.1.1 | NodeelnNetworkProcessorGroup | |||
| 1.3.6.1.4.1.193.109.1.1.1 | ScalarelnNetworkProcessorModel | read-only | current | The network processor model. |
| 1.3.6.1.4.1.193.109.1.1.2 | ScalarelnNetworkProcessorVersion | read-only | current | The network processor version. |
| 1.3.6.1.4.1.193.109.1.1.3 | ScalarelnRealTimeClock | read-write | current | Date and Time settings. |
| 1.3.6.1.4.1.193.109.1.1.4 | ScalarelnNtpClientStatus | read-write | current | Set the mode in which the NTP client will operate. At unicast mode the elnNtpServer must have been set. |
| 1.3.6.1.4.1.193.109.1.1.5 | ScalarelnNtpServer | read-write | current | The Hostname or IP address of the NTP server. Used when client is in unicast(1) status. |
| 1.3.6.1.4.1.193.109.1.1.6 | ScalarelnSysLogServer | read-write | current | The Hostname or IP address of the Syslog server. |
| 1.3.6.1.4.1.193.109.1.2 | NodeelnBoardGroup | |||
| 1.3.6.1.4.1.193.109.1.2.1 | ScalarelnMainBoardType | read-only | current | The main board type. |
| 1.3.6.1.4.1.193.109.1.2.2 | ScalarelnMainBoardProductNo | read-only | current | The main board product number. |
| 1.3.6.1.4.1.193.109.1.2.3 | ScalarelnMainBoardRevision | read-only | current | The main board revision. |
| 1.3.6.1.4.1.193.109.1.2.4 | ScalarelnMainBoardSerialNo | read-only | current | The main board serial number. |
| 1.3.6.1.4.1.193.109.1.2.5 | ScalarelnMainBoardTemperature | read-only | current | The main board temperature in centigrades. |
| 1.3.6.1.4.1.193.109.1.2.6 | ScalarelnMainBoardTemperatureLimit | read-write | current | The main board temperature limit in centigrades. When the limit is exceeded an 'elnOverheat' trap is sent. |
| 1.3.6.1.4.1.193.109.1.2.7 | TableelnMezzanineBoardTable | not-accessible | current | A list of mezzanine board entries. |
| 1.3.6.1.4.1.193.109.1.2.7.1 | RowelnMezzanineBoardEntry | not-accessible | current | An entry containing management information applicable to a specific mezzanine board. |
| 1.3.6.1.4.1.193.109.1.2.7.1.1 | ColumnelnMezzanineBoardIndex | read-only | current | The mezzanine board index. |
| 1.3.6.1.4.1.193.109.1.2.7.1.2 | ColumnelnMezzanineBoardType | read-only | current | The mezzanine board type. |
| 1.3.6.1.4.1.193.109.1.2.7.1.3 | ColumnelnMezzanineBoardProductNo | read-only | current | The mezzanine board product number. |
| 1.3.6.1.4.1.193.109.1.2.7.1.4 | ColumnelnMezzanineBoardRevision | read-only | current | The mezzanine board revision. |
| 1.3.6.1.4.1.193.109.1.2.7.1.5 | ColumnelnMezzanineBoardSerialNo | read-only | current | The mezzanine board serial number. |
| 1.3.6.1.4.1.193.109.1.3 | NodeelnPortGroup | |||
| 1.3.6.1.4.1.193.109.1.3.1 | ScalarelnPortRedundancyList | read-write | current | The port number list of reduntant ports. |
| 1.3.6.1.4.1.193.109.1.3.2 | ScalarelnPortRedundancyActivePort | read-only | current | The port number of the currently active reduntant port. The value 0 if there are no active port. |
| 1.3.6.1.4.1.193.109.1.3.3 | ScalarelnPortIndex | read-only | current | |
| 1.3.6.1.4.1.193.109.1.3.4 | TableelnPortTable | not-accessible | current | A list of interface entries. This table is an extension of the ifTable in the Interface MIB. |
| 1.3.6.1.4.1.193.109.1.3.4.1 | RowelnPortEntry | not-accessible | current | An entry containing management information applicable to a specific interface. |
| 1.3.6.1.4.1.193.109.1.3.4.1.1 | ColumnelnPortCrossover | read-write | current | Cable crossover switch. No write access for ports with no crossover switch. |
| 1.3.6.1.4.1.193.109.1.3.4.1.2 | ColumnelnPortConfiguredAutoNegotiation | read-write | current | Defines if speed auto negotiation is active or not. No write access for ports with no auto negotiation. |
| 1.3.6.1.4.1.193.109.1.3.4.1.3 | ColumnelnPortPosition | read-only | current | Board position, that is mezzanine board this port is on. An index in the mezzanine table, elnMezzanineBoardIndex. If there ar no mezzanine boards, the port is … |
| 1.3.6.1.4.1.193.109.1.3.4.1.4 | ColumnelnPortConfiguredSpeed | read-write | current | Defines the configured port speed in Mbits per second. No write access for ports with fixed speed. |
| 1.3.6.1.4.1.193.109.1.3.4.1.5 | ColumnelnPortConfiguredDuplex | read-write | current | Defines the configured half or full duplex mode. No write access for ports with fixed duplex mode. |
| 1.3.6.1.4.1.193.109.1.3.4.1.6 | ColumnelnPortMediaType | read-only | current | Reports the media type for the port. |
| 1.3.6.1.4.1.193.109.1.3.4.1.7 | ColumnelnPortLinkUpDownTrapEnable | read-write | current | Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object have the value enabled true. |
| 1.3.6.1.4.1.193.109.1.4 | NodeelnVlanGroup | |||
| 1.3.6.1.4.1.193.109.1.4.1 | TableelnVlanTable | not-accessible | current | A list of VLAN entries. |
| 1.3.6.1.4.1.193.109.1.4.1.1 | RowelnVlanEntry | not-accessible | current | An entry containing management information applicable to a specific VLAN. |
| 1.3.6.1.4.1.193.109.1.4.1.1.1 | ColumnelnVlanIndex | read-only | current | The index for the VLAN. |
| 1.3.6.1.4.1.193.109.1.4.1.1.5 | ColumnelnVlanUntaggedPorts | read-only | current | List of untagged ports in the VLAN. |
| 1.3.6.1.4.1.193.109.1.4.1.1.6 | ColumnelnVlanTaggedPorts | read-only | current | List of tagged ports in the VLAN. |
| 1.3.6.1.4.1.193.109.1.4.1.1.7 | ColumnelnVlanDescription | read-write | current | The description for the VLAN. |
| 1.3.6.1.4.1.193.109.1.4.1.1.8 | ColumnelnVlanSwitchingRule | read-write | current | Defines the switching options to use for the VLAN. 0 - normal switching, 2 - forced forwarding with ip validation, 3 - forced forwarding with ip validation and… |
| 1.3.6.1.4.1.193.109.1.4.1.1.9 | ColumnelnVlanMaxVirtualMacAddresses | read-write | current | The number of allowed Virtual MAC Addresses for each Port in this VLAN. |
| 1.3.6.1.4.1.193.109.1.4.1.1.10 | ColumnelnVlanMaxDynamicIpAddresses | read-write | current | The number of allowed dynamic IP addresses for each Port in this VLAN. The value 65535 implies an infinite number of addresses. |
| 1.3.6.1.4.1.193.109.1.4.1.1.11 | ColumnelnVlanArpAndDhcpTag | read-write | current | The tag for the downstream VLAN from the gateway. The value 0 is used for an untagged VLAN, the value 4096 indicates that the function is not used. |
| 1.3.6.1.4.1.193.109.1.4.1.1.12 | ColumnelnVlanMacAddressLearning | read-write | current | Defines if MAC address learning is active on the VLAN. |
| 1.3.6.1.4.1.193.109.1.4.1.1.14 | ColumnelnVlanUplink | read-write | current | The up link port for the VLAN. The value 0 means that the up-link is undefined. |
| 1.3.6.1.4.1.193.109.1.4.1.1.15 | ColumnelnVlanTransitlink | read-write | current | The transit link port for the VLAN. The value 0 means that the transit-link is undefined. |
| 1.3.6.1.4.1.193.109.1.4.1.1.16 | ColumnelnVlanIpAddress | read-write | obsolete | The own IP Address used in ARP messages for the VLAN. |
| 1.3.6.1.4.1.193.109.1.4.1.1.17 | ColumnelnVlanGateway | read-write | current | The IP Address or MAC Address of the Gateway for the VLAN. A value of length 4 will be handled as an IP Address, and of length 6 as a MAC Address. Or the strin… |
| 1.3.6.1.4.1.193.109.1.4.1.1.18 | ColumnelnVlanDhcpOption82 | read-write | obsolete | Determines if DHCP option 82 shall be added to upstream DHCP requests towards a DHCP server. And removed from downstream DHCP replies towards the user, see RFC… |
| 1.3.6.1.4.1.193.109.1.4.1.1.19 | ColumnelnVlanMulticast | read-write | current | Defines if Multicast is allowed on the VLAN. |
| 1.3.6.1.4.1.193.109.1.4.1.1.20 | ColumnelnVlanMacAddress | read-write | current | The source MAC Address to be used in ARP messages for the VLAN. Or the string 'A' if the MAC address shall be automatically borrowed from a client MAC addresse… |
| 1.3.6.1.4.1.193.109.1.4.1.1.21 | ColumnelnVlanIpAddressN | read-write | current | The source IP Address to be used in ARP messages for the VLAN. Or the string 'A' if the IP address shall be automatically borrowed from a client IP addresses i… |
| 1.3.6.1.4.1.193.109.1.4.1.1.22 | ColumnelnVlanDhcpOption82N | read-write | current | Determines if DHCP option 82 shall be added to upstream DHCP requests towards a DHCP server, nnd removed from downstream DHCP replies towards the user, see RFC… |
| 1.3.6.1.4.1.193.109.1.5 | NodeelnQosGroup | |||
| 1.3.6.1.4.1.193.109.1.5.1 | TableelnBandwidthLimitationTable | not-accessible | current | A list of bandwidth limitation entries. |
| 1.3.6.1.4.1.193.109.1.5.1.1 | RowelnBandwidthLimitationEntry | not-accessible | current | An entry containing management information applicable to a specific bandwidth limitation profile. |
| 1.3.6.1.4.1.193.109.1.5.1.1.1 | ColumnelnBandwidthLimitationIndex | read-only | current | The bandwidth limitation index. |
| 1.3.6.1.4.1.193.109.1.5.1.1.2 | ColumnelnBandwidthLimitationBandWidth | read-write | current | The maximum bandwidth, in bits per second, allowed for a service with this rate shape. |
| 1.3.6.1.4.1.193.109.1.5.1.1.3 | ColumnelnBandwidthLimitationBurstTolerance | read-write | current | The burst tolerance measured in milli-seconds. The value 0 means that the burst tolerance is automatically calculated. |
| 1.3.6.1.4.1.193.109.1.6 | NodeelnConnectionGroup | |||
| 1.3.6.1.4.1.193.109.1.6.1 | TableelnPortConnectionTable | not-accessible | current | A list of Port to VLAN connection entries. An entry is created/removed by using the RowStatus. |
| 1.3.6.1.4.1.193.109.1.6.1.1 | RowelnPortConnectionEntry | not-accessible | current | An entry containing management information applicable to a specific Port to VLAN connection. The entry uses the index from the elnPortTable and elnVlanTable. |
| 1.3.6.1.4.1.193.109.1.6.1.1.2 | ColumnelnPortConnectionPriority | read-create | current | The priority for the Port to VLAN connection. |
| 1.3.6.1.4.1.193.109.1.6.1.1.3 | ColumnelnPortConnectionBandwidthLimitationReceive | read-create | current | The bandwidth limitation profile in the receive direction, (the index in the elnBandwidthLimitationTable). The value 0 means no bandwidth limitation. |
| 1.3.6.1.4.1.193.109.1.6.1.1.4 | ColumnelnPortConnectionBandwidthLimitationTransmit | read-create | current | The bandwidth limitation profile in the transmit direction. (the index in the elnBandwidthLimitationTable). The value 0 means no bandwidth limitation. |
| 1.3.6.1.4.1.193.109.1.6.1.1.7 | ColumnelnPortConnectionDescription | read-create | current | A description of the Port to VLAN connection. |
| 1.3.6.1.4.1.193.109.1.6.1.1.8 | ColumnelnPortConnectionStatus | read-create | current | The row status. |
| 1.3.6.1.4.1.193.109.1.6.1.1.9 | ColumnelnPortConnectionVlanTag | read-create | current | Defines the vlan-tag for the connection, untagged(0), tag(1-4095), all(4096). All means all ingress tags are accepted and used transparent for egress. |
| 1.3.6.1.4.1.193.109.1.6.2 | TableelnIngressConnectionTable | not-accessible | current | A list of Ingress connection entries. An entry is created/removed by using the RowStatus. |
| 1.3.6.1.4.1.193.109.1.6.2.1 | RowelnIngressConnectionEntry | not-accessible | current | An entry containing management information applicable to a specific connection. The entry uses the index from elnPortTable and elnVlanTable. |
| 1.3.6.1.4.1.193.109.1.6.2.1.1 | ColumnelnIngressConnectionDescription | read-create | current | A description of the connection. |
| 1.3.6.1.4.1.193.109.1.6.2.1.3 | ColumnelnIngressConnectionPriority | read-create | current | The priority for the connection. |
| 1.3.6.1.4.1.193.109.1.6.2.1.4 | ColumnelnIngressConnectionReliability | read-create | current | The reliability for the connection. |
| 1.3.6.1.4.1.193.109.1.6.2.1.5 | ColumnelnIngressConnectionBandwidthLimitation | read-create | current | The bandwidth limitation profile, an index in elnBandwidthLimitationTable. The value 0 implies no bandwidth limitation. |
| 1.3.6.1.4.1.193.109.1.6.2.1.7 | ColumnelnIngressConnectionFilterProfile | read-create | current | Defines a filter profile for the connection. The value 0 implies no filter profile. |
| 1.3.6.1.4.1.193.109.1.6.2.1.8 | ColumnelnIngressConnectionIpDestinations | read-create | current | Only IP Packets with these IP Addresses as destinations are directed to this VLAN (Switching Domain). If the string is empty all destinations are directed to t… |
| 1.3.6.1.4.1.193.109.1.6.2.1.20 | ColumnelnIngressConnectionStatus | read-create | current | The row status. |
| 1.3.6.1.4.1.193.109.1.6.3 | TableelnIngressConnectionTagTable | not-accessible | current | A list of ingress connection tag entries. |
| 1.3.6.1.4.1.193.109.1.6.3.1 | RowelnIngressConnectionTagEntry | not-accessible | current | An entry containing management information applicable to a specific ingress tag entry. |
| 1.3.6.1.4.1.193.109.1.6.3.1.1 | ColumnelnIngressConnectionTagValue | read-create | current | Allowed vlan-tag for the port ingress connection, untagged(0), tag(1-4095), all(4096). If the value is all(4096) there is only one entry for that ingress conne… |
| 1.3.6.1.4.1.193.109.1.6.3.1.2 | ColumnelnIngressConnectionTagStatus | read-create | current | The row status. |
| 1.3.6.1.4.1.193.109.1.6.4 | TableelnEgressConnectionTable | not-accessible | current | A list of Egress connection entries. An entry is created/removed by using the RowStatus. |
| 1.3.6.1.4.1.193.109.1.6.4.1 | RowelnEgressConnectionEntry | not-accessible | current | An entry containing management information applicable to a specific Port to VLAN connection. an index from the elnPortTable and elnVlanTable. |
| 1.3.6.1.4.1.193.109.1.6.4.1.1 | ColumnelnEgressConnectionDescription | read-create | current | A description of the connection. |
| 1.3.6.1.4.1.193.109.1.6.4.1.2 | ColumnelnEgressConnectionTag | read-create | current | Defines the vlan-tag for the connection, untagged(0), tag(1-4095), transparent(4096). for transparent(4096) the ingress tag is used. |
| 1.3.6.1.4.1.193.109.1.6.4.1.3 | ColumnelnEgressConnectionPriorityTag | read-create | current | Defines the P-tag for the connection, priority(0-7), transparent(8). For transparent(8) the ingress tag is used. |
| 1.3.6.1.4.1.193.109.1.6.4.1.4 | ColumnelnEgressConnectionBandwidthLimitation | read-create | current | The bandwidth limitation profile, an index in elnBandwidthLimitationTable. The value 0 implies no bandwidth limitation. |
| 1.3.6.1.4.1.193.109.1.6.4.1.6 | ColumnelnEgressConnectionBroadcastAllowed | read-create | current | Defines if Broadcast is allowed for the connection. |
| 1.3.6.1.4.1.193.109.1.6.4.1.7 | ColumnelnEgressConnectionSecondTag | read-create | current | Defines the vlan-tag for the connection, untagged(0), tag(1-4095), transparent(4096). for transparent(4096) the ingress tag is used. |
| 1.3.6.1.4.1.193.109.1.6.4.1.8 | ColumnelnEgressConnectionSecondPriorityTag | read-create | current | Defines the P-tag for the connection, priority(0-7), transparent(8). For transparent(8) the ingress tag is used. |
| 1.3.6.1.4.1.193.109.1.6.4.1.20 | ColumnelnEgressConnectionStatus | read-create | current | The row status. |
| 1.3.6.1.4.1.193.109.1.6.5 | TableelnIngressConnectionSecondTagTable | not-accessible | current | A list of ingress connection tag entries. |
| 1.3.6.1.4.1.193.109.1.6.5.1 | RowelnIngressConnectionSecondTagEntry | not-accessible | current | An entry containing management information applicable to a specific ingress tag entry. |
| 1.3.6.1.4.1.193.109.1.6.5.1.1 | ColumnelnIngressConnectionSecondTagValue | read-create | current | Allowed vlan-tag for the port ingress connection, untagged(0), tag(1-4095), all(4096). If the value is all(4096) there is only one entry for that ingress conne… |
| 1.3.6.1.4.1.193.109.1.6.5.1.2 | ColumnelnIngressConnectionSecondTagStatus | read-create | current | The row status. |
| 1.3.6.1.4.1.193.109.1.7 | NodeelnIgmpGroup | |||
| 1.3.6.1.4.1.193.109.1.7.3 | ScalarelnIgmpSnoopingHostDisconnectTime | read-write | obsolete | Maximum timeout value (in seconds) between host membership reports. At expiry the host is removed from the group. A value above 1000000000 is handled as infini… |
| 1.3.6.1.4.1.193.109.1.7.4 | ScalarelnIgmpSnoopingDisconnectOldest | read-write | obsolete | Defines the action when the maximum number of active Multicast groups is reached (according elnIgmpSnoopingConnectionMulticastGroupLimit). The value true means… |
| 1.3.6.1.4.1.193.109.1.8 | NodeelnConnectionDataGroup | |||
| 1.3.6.1.4.1.193.109.1.8.1 | TableelnConnectionDataTable | not-accessible | current | A list of connection entries. |
| 1.3.6.1.4.1.193.109.1.8.1.1 | RowelnConnectionDataEntry | not-accessible | current | An entry containing management information applicable to specific connection data. |
| 1.3.6.1.4.1.193.109.1.8.1.1.1 | ColumnelnConnectionDataOption82String | read-write | obsolete | The specified string will be inserted as 'Agent Circuit ID' or 'Agent Remote ID', see RFC 3046. |
| 1.3.6.1.4.1.193.109.1.8.1.1.3 | ColumnelnConnectionDataOption82Config | read-write | obsolete | Determines which DHCP Snooping configuration to use. The snooping agent adds DHCP option 82 to upstream DHCP requests, and removes the option 82 from downstrea… |
| 1.3.6.1.4.1.193.109.1.8.1.1.4 | ColumnelnConnectionMulticastGroupLimit | read-write | current | Defines the maximum number of active Multicast groups, i.e. the maximum number of parallel channels for this VLAN on this port. The value 0 means that there ar… |
| 1.3.6.1.4.1.193.109.1.8.1.1.5 | ColumnelnConnectionMulticastWhiteList | read-write | current | Multicast groups which are within the range are allowed. If the string is empty all multicast groups are allowed. Each range is 8 bytes. To represent the range… |
| 1.3.6.1.4.1.193.109.1.8.1.1.10 | ColumnelnConnectionDataOption82CircuitId | read-write | current | The specified string will be inserted as 'Agent Circuit ID' sub-option 1, see RFC 3046. |
| 1.3.6.1.4.1.193.109.1.8.1.1.11 | ColumnelnConnectionDataOption82RemoteId | read-write | current | The specified string will be inserted as 'Agent Remote ID' sub-option 2, see RFC 3046. |
| 1.3.6.1.4.1.193.109.1.8.2 | TableelnStaticIpAddressTable | not-accessible | current | A list of user port static ip entries. |
| 1.3.6.1.4.1.193.109.1.8.2.1 | RowelnStaticIpAddressEntry | not-accessible | current | An entry containing management information applicable to a specific static ip address. |
| 1.3.6.1.4.1.193.109.1.8.2.1.1 | ColumnelnStaticIpAddress | read-create | current | Valid source IP adress. |
| 1.3.6.1.4.1.193.109.1.8.2.1.2 | ColumnelnStaticIpAddressStatus | read-create | current | Rowstatus for creation and deletion of rows |
| 1.3.6.1.4.1.193.109.1.8.3 | TableelnDynamicIpAddressTable | not-accessible | current | A list of user port dynamic ip entries. |
| 1.3.6.1.4.1.193.109.1.8.3.1 | RowelnDynamicIpAddressEntry | not-accessible | current | An entry containing management information applicable to a specific dynamic ip address. |
| 1.3.6.1.4.1.193.109.1.8.3.1.1 | ColumnelnDynamicIpAddress | read-only | current | Dynamic IP address assigned to VLAN and Port. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| PortList | OCTET STRING | current | Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents… |