ERICSSON-ROUTER-L2VPN-MIB
113 objects
This management information base displays Layer 2 Virtual Private Networks(VPN) / Pesudowires(PWs) information.
Imported Objects
| ERICSSON-ROUTER-SMI | eriRouterMgmt |
| ERICSSON-ROUTER-TC | EriRouterCircuitHandle |
| IF-MIB | InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress InetAddressType InetPortNumber |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.193.218.2.39 | IdentityeriRouterL2VpnMIB | This management information base displays Layer 2 Virtual Private Networks(VPN) / Pesudowires(PWs) information. | ||
| 1.3.6.1.4.1.193.218.2.39.0 | NodeeriRouterMplsL2VpnMIBNotifications | |||
| 1.3.6.1.4.1.193.218.2.39.0.1 | NotificationeriRouterMplsL2VpnLdpPwStateChange | current | This notification is generated when PW state transitions operationally to UP/DOWN/STANDBY. | |
| 1.3.6.1.4.1.193.218.2.39.1 | NodeeriRouterL2VpnMIBObjects | |||
| 1.3.6.1.4.1.193.218.2.39.1.1 | TableeriRouterL2VpnStaticTable | not-accessible | obsolete | This table contains objects which identify static Layer 2 VPN circuits. With respect to creation and deletion of entries in this table, rows are created or del… |
| 1.3.6.1.4.1.193.218.2.39.1.1.1 | RoweriRouterL2VpnStaticEntry | not-accessible | obsolete | A conceptual row in the eriRouterL2VpnStaticTable. |
| 1.3.6.1.4.1.193.218.2.39.1.1.1.1 | ColumneriRouterL2VpnStaticPeerAddr | not-accessible | obsolete | This object indicates the ip address of the VPN peer. |
| 1.3.6.1.4.1.193.218.2.39.1.1.1.2 | ColumneriRouterL2VpnStaticVpnLabel | not-accessible | obsolete | This object indicates the unique value assigned to a particular static VPN circuit. |
| 1.3.6.1.4.1.193.218.2.39.1.1.1.3 | ColumneriRouterL2VpnStaticCctHandle | read-only | obsolete | This object indicates the internal representation of the physical circuit to which this VPN is connected. A hexadecimal value of ff ff ff ff ff ff ff ff indica… |
| 1.3.6.1.4.1.193.218.2.39.1.1.1.4 | ColumneriRouterL2VpnStaticVpnCctHandle | read-only | obsolete | This object indicates the internal representation of VPN pseudo circuit. |
| 1.3.6.1.4.1.193.218.2.39.1.1.1.5 | ColumneriRouterL2VpnStaticExpBits | read-only | obsolete | This object indicates the number of exp bits configured for this VPN circuit. |
| 1.3.6.1.4.1.193.218.2.39.1.1.1.6 | ColumneriRouterL2VpnStaticInputCctUp | read-only | obsolete | This object indicates the status of the VPN input circuit. A value of true indicates that the VPN circuit is connected with it's remote site. A value of false … |
| 1.3.6.1.4.1.193.218.2.39.1.1.1.7 | ColumneriRouterL2VpnStaticXcFlags | read-only | obsolete | This object indicates more detailed information on the status of the VPN circuit. This object is a bit field so it may contain one or more of these values. |
| 1.3.6.1.4.1.193.218.2.39.1.1.1.8 | ColumneriRouterL2VpnStaticIfIndexOrZero | read-only | obsolete | This object indicates whether there is a corresponding entry in the ifTable. A non-zero value indicates the ifIndex of the entry in the ifTable. A value of zer… |
| 1.3.6.1.4.1.193.218.2.39.1.2 | TableeriRouterL2VpnLdpTable | not-accessible | obsolete | This table contains objects which identify Layer Distribution Protocol Layer 2 VPN circuits. With respect to creation and deletion of entries in this table, ro… |
| 1.3.6.1.4.1.193.218.2.39.1.2.1 | RoweriRouterL2VpnLdpEntry | not-accessible | obsolete | A conceptual row in the eriRouterL2VpnStaticTable. |
| 1.3.6.1.4.1.193.218.2.39.1.2.1.1 | ColumneriRouterL2VpnLdpPeerAddr | not-accessible | obsolete | This object indicates the ip address if the VPN peer. |
| 1.3.6.1.4.1.193.218.2.39.1.2.1.2 | ColumneriRouterL2VpnLdpVcId | not-accessible | obsolete | This object indicates the unique virtual VPN circuit id assigned to this circuit. |
| 1.3.6.1.4.1.193.218.2.39.1.2.1.3 | ColumneriRouterL2VpnLdpCctHandle | read-only | obsolete | This object indicates the internal representation of the physical circuit to which this VPN is connected. A hexadecimal value of ff ff ff ff ff ff ff ff indica… |
| 1.3.6.1.4.1.193.218.2.39.1.2.1.4 | ColumneriRouterL2VpnLdpVpnCctHandle | read-only | obsolete | This object indicates the internal representation of the VPN pseudo circuit. |
| 1.3.6.1.4.1.193.218.2.39.1.2.1.5 | ColumneriRouterL2VpnLdpInLabel | read-only | obsolete | This object indicates the value used by the remote connection in order to identify this VPN circuit when communicating with the local manager. |
| 1.3.6.1.4.1.193.218.2.39.1.2.1.6 | ColumneriRouterL2VpnLdpVpnLabel | read-only | obsolete | This object indicates the value setup in the local configuration to identify this VPN circuit. |
| 1.3.6.1.4.1.193.218.2.39.1.2.1.7 | ColumneriRouterL2VpnLdpRemGrpId | read-only | obsolete | This object indicates the remote group of which this VPN circuit is a part. |
| 1.3.6.1.4.1.193.218.2.39.1.2.1.8 | ColumneriRouterL2VpnLdpLocEncap | read-only | obsolete | This object indicates the local encaps type associated with this VPN circuit. |
| 1.3.6.1.4.1.193.218.2.39.1.2.1.9 | ColumneriRouterL2VpnLdpRemEncap | read-only | obsolete | This object indicates the remote encaps type associated with this VPN circuit. |
| 1.3.6.1.4.1.193.218.2.39.1.2.1.10 | ColumneriRouterL2VpnLdpLocVcType | read-only | obsolete | This object indicates the type of virtual circuit on the local system. |
| 1.3.6.1.4.1.193.218.2.39.1.2.1.11 | ColumneriRouterL2VpnLdpRemVcType | read-only | obsolete | This object indicates the type of virtual circuit on the remote system. |
| 1.3.6.1.4.1.193.218.2.39.1.2.1.12 | ColumneriRouterL2VpnLdpLocMtu | read-only | obsolete | This object indicates the maximum transmission unit of the local VPN circuit. |
| 1.3.6.1.4.1.193.218.2.39.1.2.1.13 | ColumneriRouterL2VpnLdpRemMtu | read-only | obsolete | This object indicates the maximum transmission unit of the remote connection. |
| 1.3.6.1.4.1.193.218.2.39.1.2.1.14 | ColumneriRouterL2VpnLdpXcCctUp | read-only | obsolete | This object indicates the status of the VPN cross connect circuit. A value of true indicates that the VPN circuit is connected with it's remote site. A value o… |
| 1.3.6.1.4.1.193.218.2.39.1.2.1.15 | ColumneriRouterL2VpnLdpExpBits | read-only | obsolete | This object indicates the number of exp bits configured for this VPN circuit. |
| 1.3.6.1.4.1.193.218.2.39.1.2.1.16 | ColumneriRouterL2VpnLdpInputCctUp | read-only | obsolete | This object indicates the status of the VPN input circuit. A value of true indicates that the VPN circuit is connected with it's remote site. A value of false … |
| 1.3.6.1.4.1.193.218.2.39.1.2.1.17 | ColumneriRouterL2VpnLdpXcFlags | read-only | obsolete | This object indicates more detailed information on the status of the VPN circuit. This object is a bit field so it may contain one or more of these values. |
| 1.3.6.1.4.1.193.218.2.39.1.2.1.18 | ColumneriRouterL2VpnLdpIfIndexOrZero | read-only | obsolete | This object indicates whether there is a corresponding entry in the ifTable. A non-zero value indicates the ifIndex of the entry in the ifTable. A value of zer… |
| 1.3.6.1.4.1.193.218.2.39.2 | NodeeriRouterL2VpnMIBConformance | |||
| 1.3.6.1.4.1.193.218.2.39.2.1 | NodeeriRouterL2VpnMIBGroups | |||
| 1.3.6.1.4.1.193.218.2.39.2.1.1 | GrouperiRouterL2VpnStaticGroup | obsolete | A collection of objects providing information about the status of static L2 VPN connections. | |
| 1.3.6.1.4.1.193.218.2.39.2.1.2 | GrouperiRouterL2VpnLdpGroup | obsolete | A collection of objects providing information about the status of L2 VPN connections using Label Detection Protocol. | |
| 1.3.6.1.4.1.193.218.2.39.2.1.3 | GrouperiRouterMplsL2VpnPwScalarGroup | current | Collection of scalar objects required for L2VPN PW management | |
| 1.3.6.1.4.1.193.218.2.39.2.1.4 | GrouperiRouterMplsL2VpnStaticPwGroup | current | A collection of objects providing information about the status of static L2 VPN Pesudowires. | |
| 1.3.6.1.4.1.193.218.2.39.2.1.5 | GrouperiRouterMplsL2VpnLdpPwGroup | current | A collection of objects providing information about the status of L2 VPN Pesudowires using Label Detection Protocol. | |
| 1.3.6.1.4.1.193.218.2.39.2.1.6 | GrouperiRouterMplsL2VpnPwNotificationGroup | current | Objects required for L2VPN PW notifications. | |
| 1.3.6.1.4.1.193.218.2.39.2.1.7 | GrouperiRouterUdpL2VpnStaticPwGroup | current | A collection of objects providing information about the status of static L2 VPN Pesudowires. | |
| 1.3.6.1.4.1.193.218.2.39.2.2 | NodeeriRouterL2VpnMIBCompliances | |||
| 1.3.6.1.4.1.193.218.2.39.2.2.1 | ComplianceeriRouterL2VpnMIBCompliance | obsolete | The compliance statement for the L2VPN MIB. | |
| 1.3.6.1.4.1.193.218.2.39.2.2.2 | ComplianceeriRouterMplsL2VpnPwMIBCompliance | current | The compliance statement for the L2VPN MIB. | |
| 1.3.6.1.4.1.193.218.2.39.2.2.3 | ComplianceeriRouterUdpL2VpnPwMIBCompliance | current | The compliance statement for the L2VPN MIB. | |
| 1.3.6.1.4.1.193.218.2.39.2.3 | NodeeriRouterMplsL2VpnMIBGroups | |||
| 1.3.6.1.4.1.193.218.2.39.2.3.1 | GrouperiRouterMplsL2VpnStaticGroup | current | A collection of objects providing information about the status of static L2 VPN connections. | |
| 1.3.6.1.4.1.193.218.2.39.2.3.2 | GrouperiRouterMplsL2VpnLdpGroup | current | A collection of objects providing information about the status of L2 VPN connections using Label Detection Protocol. | |
| 1.3.6.1.4.1.193.218.2.39.2.4 | NodeeriRouterMplsL2VpnMIBCompliances | |||
| 1.3.6.1.4.1.193.218.2.39.2.4.1 | ComplianceeriRouterMplsL2VpnMIBCompliance | current | The compliance statement for the L2VPN MIB. | |
| 1.3.6.1.4.1.193.218.2.39.3 | NodeeriRouterMplsL2VpnMIBObjects | |||
| 1.3.6.1.4.1.193.218.2.39.3.3 | TableeriRouterMplsL2VpnStaticTable | not-accessible | current | This table contains objects which identify static Layer 2 VPN circuits. With respect to creation and deletion of entries in this table, rows are created or del… |
| 1.3.6.1.4.1.193.218.2.39.3.3.1 | RoweriRouterMplsL2VpnStaticEntry | not-accessible | current | A conceptual row in the eriRouterMplsL2VpnStaticTable. |
| 1.3.6.1.4.1.193.218.2.39.3.3.1.1 | ColumneriRouterMplsL2VpnStaticInLabel | not-accessible | current | This object indicates the value used by the remote connection in order to identify this VPN circuit when communicating with the label manager (Label allocated … |
| 1.3.6.1.4.1.193.218.2.39.3.3.1.2 | ColumneriRouterMplsL2VpnStaticPeerAddr | not-accessible | current | This object indicates the ip address of the VPN peer. |
| 1.3.6.1.4.1.193.218.2.39.3.3.1.3 | ColumneriRouterMplsL2VpnStaticCctHandle | read-only | current | This object indicates the internal representation of the physical circuit to which this VPN is connected. A hexadecimal value of ff ff ff ff ff ff ff ff indica… |
| 1.3.6.1.4.1.193.218.2.39.3.3.1.4 | ColumneriRouterMplsL2VpnStaticVpnCctHandle | read-only | current | This object indicates the internal representation of VPN pseudo circuit. |
| 1.3.6.1.4.1.193.218.2.39.3.3.1.5 | ColumneriRouterMplsL2VpnStaticExpBits | read-only | current | This object indicates the number of exp bits configured for this VPN circuit. |
| 1.3.6.1.4.1.193.218.2.39.3.3.1.6 | ColumneriRouterMplsL2VpnStaticInputCctUp | read-only | current | This object indicates the status of the VPN attachment circuit. A value of true indicates that the VPN attachment circuit is connected with its remote site. A … |
| 1.3.6.1.4.1.193.218.2.39.3.3.1.7 | ColumneriRouterMplsL2VpnStaticXcFlags | read-only | current | This object indicates more detailed information on the status of the VPN circuit. This object is a bit field so it may contain one or more of these values. |
| 1.3.6.1.4.1.193.218.2.39.3.3.1.8 | ColumneriRouterMplsL2VpnStaticIfIndexOrZero | read-only | current | This object indicates whether there is a corresponding entry in the ifTable. A non-zero value indicates the ifIndex of the entry in the ifTable. A value of zer… |
| 1.3.6.1.4.1.193.218.2.39.3.3.1.9 | ColumneriRouterMplsL2VpnStaticPwFlags | read-only | current | This object indicates more detailed information on the status of the VPN circuit. This object is a bit field so it may contain one or more of these values. |
| 1.3.6.1.4.1.193.218.2.39.3.3.1.10 | ColumneriRouterMplsL2VpnStaticPwState | read-only | current | This object indicates the status of the VPN input circuit. A value of up(1) indicates that the VPN circuit is active i.e. connected with its remote site. A val… |
| 1.3.6.1.4.1.193.218.2.39.3.3.1.11 | ColumneriRouterMplsL2VpnStaticVpnLabel | read-only | current | This object indicates the unique value assigned to a particular static VPN circuit (Label allocated in the remote node) |
| 1.3.6.1.4.1.193.218.2.39.3.4 | TableeriRouterMplsL2VpnLdpTable | not-accessible | current | This table contains objects which identify Layer Distribution Protocol Layer 2 VPN circuits. With respect to creation and deletion of entries in this table, ro… |
| 1.3.6.1.4.1.193.218.2.39.3.4.1 | RoweriRouterMplsL2VpnLdpEntry | not-accessible | current | A conceptual row in the eriRouterMplsL2VpnLdpTable. |
| 1.3.6.1.4.1.193.218.2.39.3.4.1.1 | ColumneriRouterMplsL2VpnLdpVcId | not-accessible | current | This object indicates the unique virtual VPN circuit id assigned to this circuit. |
| 1.3.6.1.4.1.193.218.2.39.3.4.1.2 | ColumneriRouterMplsL2VpnLdpPeerAddr | not-accessible | current | This object indicates the ip address if the VPN peer. |
| 1.3.6.1.4.1.193.218.2.39.3.4.1.3 | ColumneriRouterMplsL2VpnLdpCctHandle | read-only | current | This object indicates the internal representation of the physical circuit to which this VPN is connected. A hexadecimal value of ff ff ff ff ff ff ff ff indica… |
| 1.3.6.1.4.1.193.218.2.39.3.4.1.4 | ColumneriRouterMplsL2VpnLdpVpnCctHandle | read-only | current | This object indicates the internal representation of the VPN pseudo circuit. |
| 1.3.6.1.4.1.193.218.2.39.3.4.1.5 | ColumneriRouterMplsL2VpnLdpInLabel | read-only | current | This object indicates the value used by the remote connection in order to identify this VPN circuit when communicating with the local manager. |
| 1.3.6.1.4.1.193.218.2.39.3.4.1.6 | ColumneriRouterMplsL2VpnLdpVpnLabel | read-only | current | This object indicates the value setup in the local configuration to identify this VPN circuit. |
| 1.3.6.1.4.1.193.218.2.39.3.4.1.7 | ColumneriRouterMplsL2VpnLdpRemGrpId | read-only | current | This object indicates the remote group of which this VPN circuit is a part. |
| 1.3.6.1.4.1.193.218.2.39.3.4.1.8 | ColumneriRouterMplsL2VpnLdpLocEncap | read-only | current | This object indicates the local encaps type associated with this VPN circuit. |
| 1.3.6.1.4.1.193.218.2.39.3.4.1.9 | ColumneriRouterMplsL2VpnLdpRemEncap | read-only | current | This object indicates the remote encaps type associated with this VPN circuit. |
| 1.3.6.1.4.1.193.218.2.39.3.4.1.10 | ColumneriRouterMplsL2VpnLdpLocVcType | read-only | current | This object indicates the type of virtual circuit on the local system. |
| 1.3.6.1.4.1.193.218.2.39.3.4.1.11 | ColumneriRouterMplsL2VpnLdpRemVcType | read-only | current | This object indicates the type of virtual circuit on the remote system. |
| 1.3.6.1.4.1.193.218.2.39.3.4.1.12 | ColumneriRouterMplsL2VpnLdpLocMtu | read-only | current | This object indicates the maximum transmission unit of the local VPN circuit. |
| 1.3.6.1.4.1.193.218.2.39.3.4.1.13 | ColumneriRouterMplsL2VpnLdpRemMtu | read-only | current | This object indicates the maximum transmission unit of the remote connection. |
| 1.3.6.1.4.1.193.218.2.39.3.4.1.14 | ColumneriRouterMplsL2VpnLdpXcCctUp | read-only | deprecated | This object indicates the status of the VPN cross connect circuit state. A value of true indicates that the VPN circuit is connected with its remote site and a… |
| 1.3.6.1.4.1.193.218.2.39.3.4.1.15 | ColumneriRouterMplsL2VpnLdpExpBits | read-only | current | This object indicates the number of exp bits configured for this VPN circuit. |
| 1.3.6.1.4.1.193.218.2.39.3.4.1.16 | ColumneriRouterMplsL2VpnLdpInputCctUp | read-only | current | This object indicates the status of the VPN attachment circuit. A value of true indicates that the VPN attachment circuit is up. A value of false indicates the… |
| 1.3.6.1.4.1.193.218.2.39.3.4.1.17 | ColumneriRouterMplsL2VpnLdpXcFlags | read-only | deprecated | This object indicates more detailed information on the status of the VPN circuit. This object is a bit field so it may contain one or more of these values. |
| 1.3.6.1.4.1.193.218.2.39.3.4.1.18 | ColumneriRouterMplsL2VpnLdpIfIndexOrZero | read-only | current | This object indicates whether there is a corresponding entry in the ifTable. A non-zero value indicates the ifIndex of the entry in the ifTable. A value of zer… |
| 1.3.6.1.4.1.193.218.2.39.3.4.1.19 | ColumneriRouterMplsL2VpnLdpPwFlags | read-only | current | This object indicates more detailed information on the status of the VPN circuit. This object is a bit field so it may contain one or more of these values. |
| 1.3.6.1.4.1.193.218.2.39.3.4.1.20 | ColumneriRouterMplsL2VpnLdpPwState | read-only | current | This object indicates the status of the VPN input circuit. A value of up(1) indicates that the VPN circuit is active i.e. connected with its remote site. A val… |
| 1.3.6.1.4.1.193.218.2.39.4 | NodeeriRouterMplsL2VpnMIBConformance | |||
| 1.3.6.1.4.1.193.218.2.39.5 | NodeeriRouterMplsL2VpnMIBScalars | |||
| 1.3.6.1.4.1.193.218.2.39.5.1 | ScalareriRouterMplsL2VpnNotificationEnable | read-write | current | If this object is true, then it enables the generation of all notifications defined in this MIB. This object's value should be preserved across agent reboots. |
| 1.3.6.1.4.1.193.218.2.39.6 | NodeeriRouterUdpL2VpnMIBObjects | |||
| 1.3.6.1.4.1.193.218.2.39.6.1 | TableeriRouterUdpL2VpnStaticTable | not-accessible | current | This table contains objects which identify static UDP Layer 2 VPN circuits. With respect to creation and deletion of entries in this table, rows are created or… |
| 1.3.6.1.4.1.193.218.2.39.6.1.1 | RoweriRouterUdpL2VpnStaticEntry | not-accessible | current | A conceptual row in the eriRouterUdpL2VpnStaticTable. |
| 1.3.6.1.4.1.193.218.2.39.6.1.1.1 | ColumneriRouterUdpL2VpnStaticPeerPort | not-accessible | current | This object indicates the peer port number for this UDP L2 VPN circuit. |
| 1.3.6.1.4.1.193.218.2.39.6.1.1.2 | ColumneriRouterUdpL2VpnStaticPeerAddressType | not-accessible | current | This object indicates the peer IP address type for this UDP L2 VPN circuit. |
| 1.3.6.1.4.1.193.218.2.39.6.1.1.3 | ColumneriRouterUdpL2VpnStaticPeerAddress | not-accessible | current | This object indicates the peer IP address for this UDP L2 VPN circuit. The peer address type is determined by the value of the corresponding eriRouterUdpL2VpnS… |
| 1.3.6.1.4.1.193.218.2.39.6.1.1.4 | ColumneriRouterUdpL2VpnStaticSourceAddressType | read-only | current | This object indicates the source IP address type for this UDP L2 VPN circuit. |
| 1.3.6.1.4.1.193.218.2.39.6.1.1.5 | ColumneriRouterUdpL2VpnStaticSourceAddress | read-only | current | This object indicates the source IP address for this UDP L2 VPN circuit. The source address type is determined by the value of the corresponding eriRouterUdpL2… |
| 1.3.6.1.4.1.193.218.2.39.6.1.1.6 | ColumneriRouterUdpL2VpnStaticSourcePort | read-only | current | This object indicates the source port number for this UDP L2 VPN circuit. |
| 1.3.6.1.4.1.193.218.2.39.6.1.1.7 | ColumneriRouterUdpL2vpnStaticAccessCctHandle | read-only | current | This object indicates the internal representation of the access circuit for this UDP L2 VPN circuit. |
| 1.3.6.1.4.1.193.218.2.39.6.1.1.8 | ColumneriRouterUdpL2VpnStaticVpnCctHandle | read-only | current | This object indicates the internal representation of this UDP L2 VPN circuit. |
| 1.3.6.1.4.1.193.218.2.39.6.1.1.9 | ColumneriRouterUdpL2VpnStaticInputCctUp | read-only | current | This object indicates the status of this UDP L2 VPN circuit. A value of true indicates that the VPN circuit is connected with it's remote site. A value of fals… |
| 1.3.6.1.4.1.193.218.2.39.6.1.1.10 | ColumneriRouterUdpL2VpnStaticIfIndexOrZero | read-only | current | This object indicates whether there is a corresponding entry of this UDP L2 VPN access circuit in the ifTable. A non-zero value indicates the ifIndex of the en… |
| 1.3.6.1.4.1.193.218.2.39.6.1.1.11 | ColumneriRouterUdpL2VpnStaticPwFlags | read-only | current | This object indicates more detailed information on the status of this UDP L2 VPN circuit. This object is a bit field so it may contain one or more of these val… |
| 1.3.6.1.4.1.193.218.2.39.6.1.1.12 | ColumneriRouterUdpL2vpnStaticDscpCode | read-only | current | Diffserver code for the CES over UDP PW. Default is Zero. The dscp code values are listed as follows: 0..63 Differentiated services codepoint value af11 Assure… |
| 1.3.6.1.4.1.193.218.2.39.6.1.1.13 | ColumneriRouterUdpL2VpnStaticPwState | read-only | current | This object indicates the status of this UDP L2 VPN circuit. A value of up(1) indicates that the VPN circuit is active i.e. connected with its remote site. A v… |
| 1.3.6.1.4.1.193.218.2.39.6.1.1.14 | ColumneriRouterUdpL2VpnStaticPsnType | read-only | current | This object indicates the packet switched networks(PSN) type for this UDP L2 VPN circuit. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| EriRouterVpnPsnType | INTEGER { unknown (0), ip (1), ipsec (2), mpls (3) } | current | Layer 2 VPN packet switched network(PSN) type. |
| EriRouterVpnPwFlagsType | BITS { none(0), inRib(1), deletingSignal(2), deletingConfig(3), inLblmap(4), updating(5), up(6), inLdp(7), fromLdp(8), fromConfig(9), stale(10), expSet(11), ismUp(12), peerUp(13), remoteEncap(14), localCbit(15), remoteCbit(16), primary(17), backup(18), primaryAutoRevert(19), standby(20), cwMismatch(21), sigParamsMatch(22), encapError(23) } | current | Layer 2 VPN Pesudowire (PW) flag values. |
| EriRouterVpnPwStateType | INTEGER { unknown (0), up (1), down (2), standby (3) } | current | Layer 2 VPN Cross connect (XC) state. |
| EriRouterVpnVcType | INTEGER { unknown(0), frame(1), aal5(2), atmTransCell(3), vlan(4), ethernet(5), hdlc(6), ppp(7), cem(8), atmVccCell(9), atmVpcCell(10) } | current | Layer 2 VPN VC types. |
| EriRouterVpnXcFlagsType | BITS { none(0), inRib(1), deletingSignal(2), deletingConfig(3), inLblmap(4), updating(5), up(6), inLdp(7), fromLdp(8), fromConfig(9), stale(10), expSet(11), ismUp(12), peerUp(13), remoteEncap(14), localCbit(15), remoteCbit(16), primary(17), backup(18), primaryAutoRevert(19), standby(20), cwMismatch(21), sigParamsMatch(22) } | current | Layer 2 VPN Cross connect flag values. |