ERICSSON-ROUTER-OPTICAL-TRANSCEIVER-MIB
53 objects
The MIB used to manage the Optical Transceivers in Line Card ports in SSR
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.193.218.2.49.0.2 | NotificationeriRouterOpticalTransceiverAlarm | current | An eriRouterOpticalTransceiverAlarm notification signifies that an alarm has been raised or cleared on a Optical Transceiver | |
| 1.3.6.1.4.1.193.218.2.49.0.3 | NotificationeriRouterOpticalTransceiverLaneAlarm | current | An eriRouterOpticalTransceiverLaneAlarm notification signifies that an alarm has been raised or cleared in a lane on a Optical Transceiver | |
| 1.3.6.1.4.1.193.218.2.49.2.3 | NodeeriRouterOpticalTransceiverMonMIBGroups | |||
| 1.3.6.1.4.1.193.218.2.49.2.3.2 | GrouperiRouterOpticalTransceiverMonMIBNotificationGroup | current | A collection of notifications providing Optical Transceiver fault condition | |
| 1.3.6.1.4.1.193.218.2.49.2.4 | NodeeriRouterOpticalTransceiverMonMIBCompliances | |||
| 1.3.6.1.4.1.193.218.2.49.2.4.1 | ComplianceeriRouterOpticalTransceiverMonMIBCompliance | current | The compliance statement for the OpticalTransceiver MIB | |
| 1.3.6.1.4.1.193.218.2.50 | IdentityeriRouterOpticalTransceiver | The MIB used to manage the Optical Transceivers in Line Card ports in SSR | ||
| 1.3.6.1.4.1.193.218.2.50.1 | NodeeriRouterOpticalTransceiverDetails | |||
| 1.3.6.1.4.1.193.218.2.50.1.1 | TableeriRouterOpticalTransceiverPortTable | not-accessible | current | This table contains the ports with optical transceivers and corresponding parameters |
| 1.3.6.1.4.1.193.218.2.50.1.1.1 | RoweriRouterOpticalTransceiverPortEntry | not-accessible | current | Line Card port optical transceiver parameter description. |
| 1.3.6.1.4.1.193.218.2.50.1.1.1.1 | ColumneriRouterOpticalTransceiverCardSlot | read-only | current | The chassis slot number in which the card is present where the Optical Transceiver plugged in. |
| 1.3.6.1.4.1.193.218.2.50.1.1.1.2 | ColumneriRouterOpticalTransceiverPort | read-only | current | The port number where the Optical Transceiver plugged in. |
| 1.3.6.1.4.1.193.218.2.50.1.1.1.3 | ColumneriRouterOpticalTransceiverType | read-only | current | Type and category of Optical Transceiver |
| 1.3.6.1.4.1.193.218.2.50.1.1.1.4 | ColumneriRouterOpticalTransceiverMediaType | read-only | current | Optical Transceiver Media Type |
| 1.3.6.1.4.1.193.218.2.50.1.1.1.5 | ColumneriRouterOpticalTransceiverEriRouterEricssonApproved | read-only | current | Is the Optical Transceiver n this port approved by Ericsson, Yes/No? |
| 1.3.6.1.4.1.193.218.2.50.1.1.1.6 | ColumneriRouterOpticalTransceiverDiagMonitoring | read-only | current | Is Optical Transceiver Diag Monitoring On or Off? |
| 1.3.6.1.4.1.193.218.2.50.1.1.1.7 | ColumneriRouterOpticalTransceiverCLEIcode | read-only | current | Optical Transceiver Common Language Equipment Identifier (CLEI) code. |
| 1.3.6.1.4.1.193.218.2.50.1.1.1.8 | ColumneriRouterOpticalTransceiverSerialNo | read-only | current | Optical Transceiver serial number |
| 1.3.6.1.4.1.193.218.2.50.1.1.1.9 | ColumneriRouterOpticalTransceiverFrequency | read-only | current | Optical Transceiver Frequency |
| 1.3.6.1.4.1.193.218.2.50.1.1.1.10 | ColumneriRouterOpticalTransceiverWaveLength | read-only | current | Optical Transceiver Wave Length |
| 1.3.6.1.4.1.193.218.2.50.1.1.1.11 | ColumneriRouterOpticalTransceiverAdditionalFeatures | read-only | current | Optical Transceiver Additional Features such as, Is Optical Transceiver OTN capable? and/or Is Optical Transceiver Tunable? |
| 1.3.6.1.4.1.193.218.2.50.1.1.1.12 | ColumneriRouterOpticalTransceiverFrequencyStart | read-only | current | Frequency Start for tunable optical transceiver. Not applicable if optical transceiver is not tunable |
| 1.3.6.1.4.1.193.218.2.50.1.1.1.13 | ColumneriRouterOpticalTransceiverFrequencyEnd | read-only | current | Frequency End for tunable optical transceiver. Not applicable if optical transceiver is not tunable |
| 1.3.6.1.4.1.193.218.2.50.1.1.1.14 | ColumneriRouterOpticalTransceiverFrequencySpacing | read-only | current | Frequency Spacing for tunable optical transceiver. Not applicable if optical transceiver is not tunable |
| 1.3.6.1.4.1.193.218.2.50.1.1.1.15 | ColumneriRouterOpticalTransceiverOTNFramer | read-only | current | Framer of OTN if optical transceiver is OTN capable. Not applicable if optical transceiver is not OTN capable |
| 1.3.6.1.4.1.193.218.2.50.1.1.1.16 | ColumneriRouterOpticalTransceiverOTNFEC | read-only | current | FEC of OTN if optical transceiver is OTN capable. Not applicable if optical transceiver is not OTN capable |
| 1.3.6.1.4.1.193.218.2.50.1.1.1.17 | ColumneriRouterOpticalTransceiverPowerLevel | read-only | current | Optical Transceiver Power Level |
| 1.3.6.1.4.1.193.218.2.50.1.1.1.18 | ColumneriRouterOpticalTransceiverActiveAlarmCount | read-only | current | Number of alarms active on the Optical Transceiver |
| 1.3.6.1.4.1.193.218.2.50.1.1.1.19 | ColumneriRouterOpticalTransceiverParamBitMask | read-only | current | This Bit Mask indicates which values are valid for EriRouterOpticalTransceiverParamType in eriRouterOpticalTransceiverParamTable: 0x0001 optical transceiver tx… |
| 1.3.6.1.4.1.193.218.2.50.1.1.1.20 | ColumneriRouterOpticalTransceiverLaneCount | read-only | current | Number of Lanes in optical transceiver |
| 1.3.6.1.4.1.193.218.2.50.1.2 | TableeriRouterOpticalTransceiverParamTable | not-accessible | current | This table provides objects to monitor optical transceiver parameters in a network element. It also provides objects for monitoring high and low warning and al… |
| 1.3.6.1.4.1.193.218.2.50.1.2.1 | RoweriRouterOpticalTransceiverParamEntry | not-accessible | current | OpticalTransceiver Parameter Entries in Table |
| 1.3.6.1.4.1.193.218.2.50.1.2.1.1 | ColumneriRouterOpticalTransceiverParamType | read-only | current | This object specifies the optical parameter type that is being monitored in this entry. |
| 1.3.6.1.4.1.193.218.2.50.1.2.1.2 | ColumneriRouterOpticalTransceiverParamDescription | read-only | current | This object specifies the optical parameter description including units that is being monitored in this entry. |
| 1.3.6.1.4.1.193.218.2.50.1.2.1.3 | ColumneriRouterOpticalTransceiverCurrentValue | read-only | current | The current value of tx power, rx power, temperature, bias current and Vcc |
| 1.3.6.1.4.1.193.218.2.50.1.2.1.4 | ColumneriRouterOpticalTransceiverMaxAlarmValue | read-only | current | The alarm high threshold value of tx power, rx power, temperature, bias current and Vcc |
| 1.3.6.1.4.1.193.218.2.50.1.2.1.5 | ColumneriRouterOpticalTransceiverMaxWarningValue | read-only | current | The warning high threshold value of tx power, rx power, temperature, bias current and Vcc |
| 1.3.6.1.4.1.193.218.2.50.1.2.1.6 | ColumneriRouterOpticalTransceiverMinAlarmValue | read-only | current | The alarm low threshold value of tx power, rx power, temperature, bias current and Vcc |
| 1.3.6.1.4.1.193.218.2.50.1.2.1.7 | ColumneriRouterOpticalTransceiverMinWarningValue | read-only | current | The warning low threshold value of tx power, rx power, temperature, bias current and Vcc |
| 1.3.6.1.4.1.193.218.2.50.1.3 | TableeriRouterLaneInOpticalTransceiverParamTable | not-accessible | current | This table provides objects to monitor optical transceiver parameters in a network element. It also provides objects for monitoring high and low warning and al… |
| 1.3.6.1.4.1.193.218.2.50.1.3.1 | RoweriRouterLaneInOpticalTransceiverParamEntry | not-accessible | current | LaneInOpticalTransceiver Parameter Entries in Table |
| 1.3.6.1.4.1.193.218.2.50.1.3.1.1 | ColumneriRouterLaneInOpticalTransceiver | read-only | current | This object specifies the optical tranceiver lane that is being monitored in this entry. |
| 1.3.6.1.4.1.193.218.2.50.1.3.1.2 | ColumneriRouterLaneInOpticalTransceiverParamType | read-only | current | This object specifies the optical parameter type that is being monitored in this entry. |
| 1.3.6.1.4.1.193.218.2.50.1.3.1.3 | ColumneriRouterLaneInOpticalTransceiverCurrentValue | read-only | current | The current value of tx power, rx power, temperature, bias current and Vcc |
| 1.3.6.1.4.1.193.218.2.50.1.3.1.4 | ColumneriRouterLaneInOpticalTransceiverMaxAlarmValue | read-only | current | The alarm high threshold value of tx power, rx power, temperature, bias current and Vcc |
| 1.3.6.1.4.1.193.218.2.50.1.3.1.5 | ColumneriRouterLaneInOpticalTransceiverMaxWarningValue | read-only | current | The warning high threshold value of tx power, rx power, temperature, bias current and Vcc |
| 1.3.6.1.4.1.193.218.2.50.1.3.1.6 | ColumneriRouterLaneInOpticalTransceiverMinAlarmValue | read-only | current | The alarm low threshold value of tx power, rx power, temperature, bias current and Vcc |
| 1.3.6.1.4.1.193.218.2.50.1.3.1.7 | ColumneriRouterLaneInOpticalTransceiverMinWarningValue | read-only | current | The warning low threshold value of tx power, rx power, temperature, bias current and Vcc |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| EriRouterLaneInOpticalTransceiverParameterValue | Integer32 (-1000000..1000000 ) | current | Tx power range - unit milli dbm Rx power range - unit milli dbm temperature range - Represents a temperature, in degrees Celsius (0..(100.000)) Bias Current Range - unit 100s of microamperes |
| EriRouterLaneInOpticalTransceiverParamType | INTEGER { laneTxPower(1), laneRxPower(2), laneTemperature(3), laneLaserBiasCurrent(4) } | current | Enums for optical transceiver parameters laneTxPower (1) : transmitter power laneRxPower (2) : receiver power laneTemperature (3) : Temperature laneLaserBiasCurrent (4) : Laser bias current in 100s of microamperes |
| EriRouterOpticalTransceiverParameterValue | Integer32 (-1000000..1000000 ) | current | Tx power value or threshold value - unit milli dbm Rx power value or threshold value - unit milli dbm temperature value or threshold value - Represents a temperature, in degrees Celsius (0..(100.000)) Bias Current value… |
| EriRouterOpticalTransceiverParamType | INTEGER { txpower(1), rxpower(2), temperature(3), laserBiasCurrent(4), soaBiasCurrent(5), vcc(6), aux1 (7), aux2 (8) } | current | Enums for optical transceiver parameters txpower (1) : transmitter power rxpower (2) : receiver power temperature (3) : Temperature laserBiasCurrent (4) : Laser bias current in 100s of microamperes soaBiasCurrent (5) : … |
| EriRouterOpticalTransceiverParamWaveLength | Integer32 (-1000000..1000000 ) | current | Wave Length in NM in 1/100th |