ESAFE-MIB
39 objects
This MIB module provides the management objects necessary to configure functionality of eSAFE components of a device implementing an eDOCSIS compliant cable modem and one or more eSAFE elements. Copyright 1999-2007 Cable Television Laboratories, Inc. All rights reserved.
Imported Objects
| IF-MIB | ifIndex |
| SNMP-FRAMEWORK-MIB | -- RFC 2580 SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | enterprises MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | -- RFC 2578 DateAndTime PhysAddress TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4491 | NodecableLabs | |||
| 1.3.6.1.4.1.4491.1 | NodeclabFunction | |||
| 1.3.6.1.4.1.4491.1.1 | NodeclabFuncMib2 | |||
| 1.3.6.1.4.1.4491.1.2 | NodeclabFuncProprietary | |||
| 1.3.6.1.4.1.4491.2 | NodeclabProject | |||
| 1.3.6.1.4.1.4491.2.1 | NodeclabProjDocsis | |||
| 1.3.6.1.4.1.4491.2.1.14 | IdentityesafeMib | This MIB module provides the management objects necessary to configure functionality of eSAFE components of a device implementing an eDOCSIS compliant cable mo… | ||
| 1.3.6.1.4.1.4491.2.1.14.1 | NodeesafeMibObjects | |||
| 1.3.6.1.4.1.4491.2.1.14.1.1 | NodeesafeBase | |||
| 1.3.6.1.4.1.4491.2.1.14.1.1.1 | TableesafeProvisioningStatusTable | not-accessible | current | This table contains the current provisioning status of each implemented eSAFE, and information about the last failure or exception condition in the eSAFE provi… |
| 1.3.6.1.4.1.4491.2.1.14.1.1.1.1 | RowesafeProvisioningStatusEntry | not-accessible | current | An entry in this table is created for each eSAFE implemented in the eDOCSIS compliant device. |
| 1.3.6.1.4.1.4491.2.1.14.1.1.1.1.1 | ColumnesafeProvisioningStatusProgress | read-only | current | The current state of the eSAFE provisioning process. notInitiated(1) indicates that the eSAFE has not yet begun its provisioning process. inProgress(2) indicat… |
| 1.3.6.1.4.1.4491.2.1.14.1.1.1.1.2 | ColumnesafeProvisioningStatusFailureFound | read-only | current | true(1) indicates that the eSAFE encountered an error condition during the provisioning process. An eSAFE could start a looping process from a previous flow st… |
| 1.3.6.1.4.1.4491.2.1.14.1.1.1.1.3 | ColumnesafeProvisioningStatusFailureFlow | read-only | current | If esafeProvisioningStatusFailureFound is true(1) this object contains the label for the provisioning flow step in which the error condition was encountered, o… |
| 1.3.6.1.4.1.4491.2.1.14.1.1.1.1.4 | ColumnesafeProvisioningStatusFailureEventID | read-only | current | If esafeProvisioningStatusFailureFound is true(1) this object contains the eSAFE log error Event Identifier defined in the eSAFE specification, otherwise it re… |
| 1.3.6.1.4.1.4491.2.1.14.1.1.1.1.5 | ColumnesafeProvisioningStatusFailureErrorText | read-only | current | If esafeProvisioningStatusFailureFound is true(1) this object contains the eSAFE log error messages based on the eSAFE specification, otherwise it returns an e… |
| 1.3.6.1.4.1.4491.2.1.14.1.1.1.1.6 | ColumnesafeProvisioningStatusLastUpdate | read-only | current | The value of the eCM docsDevDateTime when this row entry was last updated. |
| 1.3.6.1.4.1.4491.2.1.14.1.1.2 | TableesafeDevStatusTable | not-accessible | current | This table contains entries that provide the SNMP manager with status information pertaining to each implemented eSAFE device. While this table MUST be impleme… |
| 1.3.6.1.4.1.4491.2.1.14.1.1.2.1 | RowesafeDevStatusEntry | not-accessible | current | An entry in this table MUST be created for each eSAFE device behind the eCM. The index needs to be the corresponding index in the ifTable for the associated eS… |
| 1.3.6.1.4.1.4491.2.1.14.1.1.2.1.1 | ColumnesafeDevServiceIntImpact | read-only | current | The value of this MIB object indicates the service interruption impact assessment of the corresponding eSAFE device as determined by the current status of the … |
| 1.3.6.1.4.1.4491.2.1.14.1.1.2.1.2 | ColumnesafeDevServiceIntImpactInfo | read-only | current | This object provides more information to the SNMP Managers regarding the condition reported in esafeDevServiceIntImpact. The eSAFE device vendor could use this… |
| 1.3.6.1.4.1.4491.2.1.14.1.2 | NodeesafePsMibObjects | |||
| 1.3.6.1.4.1.4491.2.1.14.1.2.1 | ScalaresafePsCableHomeModeControl | read-write | current | This object provides control over the mode of operation of the CableHome ePS eSAFE element of the eDOCSIS compliant device. When this object is set to disabled… |
| 1.3.6.1.4.1.4491.2.1.14.1.2.2 | ScalaresafePsCableHomeModeStatus | read-only | current | This object provides visibility to the current mode of operation of the CableHome ePS eSAFE element of the eDOCSIS compliant device. If the value of this objec… |
| 1.3.6.1.4.1.4491.2.1.14.1.3 | NodeesafeMtaMibObjects | |||
| 1.3.6.1.4.1.4491.2.1.14.1.4 | NodeesafeStbMibObjects | |||
| 1.3.6.1.4.1.4491.2.1.14.1.5 | NodeesafeErouterMibObjects | |||
| 1.3.6.1.4.1.4491.2.1.14.1.5.1 | ScalaresafeErouterAdminMode | read-only | current | This object provides visibility to the mode of operation to which the DOCSIS eRouter eSAFE element was set via TLV in the cable modem configuration file. If th… |
| 1.3.6.1.4.1.4491.2.1.14.1.5.2 | ScalaresafeErouterOperMode | read-only | current | This object provides visibility to the current mode of operation of the DOCSIS eRouter eSAFE element of the eDOCSIS compliant device. If the value of this obje… |
| 1.3.6.1.4.1.4491.2.1.14.1.5.3 | ScalaresafeErouterPhysAddress | read-only | current | The physical address of the operator-facing interface of the DOCSIS eRouter eSAFE element. |
| 1.3.6.1.4.1.4491.2.1.14.1.5.4 | ScalaresafeErouterInitModeControl | read-write | current | This object provides control over the initialization mode of the DOCSIS eRouter eSAFE element. Except when set to honoreRouterInitMode(5), the value of this ob… |
| 1.3.6.1.4.1.4491.2.1.14.1.5.5 | ScalaresafeErouterSoftReset | read-write | current | This object provides a mechanism to soft reset the DOCSIS eRouter eSAFE element. This object can only be set via an SNMP management Station. This object cannot… |
| 1.3.6.1.4.1.4491.2.1.14.2 | NodeesafeMibConformance | |||
| 1.3.6.1.4.1.4491.2.1.14.2.1 | NodeesafeMibCompliances | |||
| 1.3.6.1.4.1.4491.2.1.14.2.1.1 | ComplianceesafeMibBasicCompliance | current | The compliance statement for eSAFE MIB objects. | |
| 1.3.6.1.4.1.4491.2.1.14.2.2 | NodeesafeMibGroups | |||
| 1.3.6.1.4.1.4491.2.1.14.2.2.1 | GroupesafeBaseGroup | current | Group of eSAFE Base objects in the eSAFE MIB. | |
| 1.3.6.1.4.1.4491.2.1.14.2.2.2 | GroupesafePsMibGroup | current | Group of embedded PS-specific objects in the eSAFE MIB. | |
| 1.3.6.1.4.1.4491.2.1.14.2.2.3 | GroupesafeErouterMibGroup | current | Group of embedded Router-specific objects in the eSAFE MIB. |