ESWITCH-MIB-V3-0
68 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter enterprises TimeTicks |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.36 | Nodedec | |||
| 1.3.6.1.4.1.36.2 | Nodeema | |||
| 1.3.6.1.4.1.36.2.18 | NodedecMIBextension | |||
| 1.3.6.1.4.1.36.2.18.11 | NodedecHub900 | |||
| 1.3.6.1.4.1.36.2.18.11.7 | NodeeSwitch | |||
| 1.3.6.1.4.1.36.2.18.11.7.1 | NodeeSwitchIf | |||
| 1.3.6.1.4.1.36.2.18.11.7.1.1 | TableeSwitchIfTable | not-accessible | mandatory | A table that contains information about various characteristics associated with each interface on the switch. |
| 1.3.6.1.4.1.36.2.18.11.7.1.1.1 | RoweSwitchIfEntry | not-accessible | mandatory | A list that contains the interface number and various characteristics associated with the interface. |
| 1.3.6.1.4.1.36.2.18.11.7.1.1.1.1 | ColumneSwitchIfIndex | read-only | mandatory | An index value that identifies the interface for which this entry defines various characteristics. The interface identified by a particular value of this index… |
| 1.3.6.1.4.1.36.2.18.11.7.1.1.1.2 | ColumneSwitchIfPresent | read-only | mandatory | This object assumes the value present(1), if the corresponding interface is present; it assumes a value of not-present(2), otherwise. An interface may not be p… |
| 1.3.6.1.4.1.36.2.18.11.7.2 | NodeeSwitchPort | |||
| 1.3.6.1.4.1.36.2.18.11.7.2.1 | TableeSwitchPortTable | not-accessible | mandatory | A table that contains information about and that may be used to configure various characteristics associated with each port on the switch. |
| 1.3.6.1.4.1.36.2.18.11.7.2.1.1 | RoweSwitchPortEntry | not-accessible | mandatory | A list that contains the port number and various characteristics associated with the port. |
| 1.3.6.1.4.1.36.2.18.11.7.2.1.1.1 | ColumneSwitchPortIndex | read-only | mandatory | The port number of the switch port for which this entry defines various characteristics. |
| 1.3.6.1.4.1.36.2.18.11.7.2.1.1.2 | ColumneSwitchPortFailed | read-only | mandatory | This object assumes the value failed(2), if the corresponding port is present, but has been determined to be faulty and has been declared failed; otherwise, th… |
| 1.3.6.1.4.1.36.2.18.11.7.2.1.1.3 | ColumneSwitchPortStatus | read-write | mandatory | When read, this object returns the current status of this port. This object may also be used to shut down a port that is currently connected(2), disconnected(3… |
| 1.3.6.1.4.1.36.2.18.11.7.2.1.1.4 | ColumneSwitchPortShutDownReason | read-only | mandatory | The reason why this port is currently shut down. A value of none(1) is returned, if the port is not currently shutdown. A value of mgmt(3) is returned, if the … |
| 1.3.6.1.4.1.36.2.18.11.7.2.1.1.5 | ColumneSwitchPortSwitchingMode | read-write | mandatory | This object defines the switching mode in which this port operates. The switching mode of a port determines whether or not it learns station location informati… |
| 1.3.6.1.4.1.36.2.18.11.7.3 | NodeeSwitchFdb | |||
| 1.3.6.1.4.1.36.2.18.11.7.3.1 | NodeeSwitchAddrFdb | |||
| 1.3.6.1.4.1.36.2.18.11.7.3.1.1 | ScalareSwitchAddrFdbMaxEntries | read-only | mandatory | The maximum number of address entries that can be accommodated in the filtering database of the switch. This number includes learned entries, static entries (e… |
| 1.3.6.1.4.1.36.2.18.11.7.3.1.2 | ScalareSwitchAddrFdbMaxStaticEntries | read-only | mandatory | The maximum number of static address entries that may be installed by management in the filtering database of the switch. This number is identical to the maxim… |
| 1.3.6.1.4.1.36.2.18.11.7.3.1.3 | ScalareSwitchAddrFdbMaxNVStaticEntries | read-only | mandatory | The maximum number of static address entries in the filtering database of the switch, that can be accommodated in non-volatile memory. Entries stored in non-vo… |
| 1.3.6.1.4.1.36.2.18.11.7.3.1.4 | ScalareSwitchAddrFdbDynamicEntries | read-only | mandatory | The current number of dynamic address entries (i.e., entries that were learnt) in the filtering database of the switch. |
| 1.3.6.1.4.1.36.2.18.11.7.3.1.5 | ScalareSwitchAddrFdbStaticEntries | read-only | mandatory | The current number of static entries in the filtering database of the switch. This number is identical to the current number of entries in the dot1dStaticTable… |
| 1.3.6.1.4.1.36.2.18.11.7.3.1.6 | ScalareSwitchAddrFdbNVStaticEntries | read-only | mandatory | The number of static address entries in the filtering database of the switch, that are currently stored in non-volatile memory. Entries stored in non-volatile … |
| 1.3.6.1.4.1.36.2.18.11.7.3.1.7 | ScalareSwitchAddrFdbPurgeStaticEntries | read-write | mandatory | This object when set to purge(1) causes all static address entries in the filtering database to be deleted both from volatile and non-volatile memory. The 'pur… |
| 1.3.6.1.4.1.36.2.18.11.7.4 | NodeeSwitchStorm | |||
| 1.3.6.1.4.1.36.2.18.11.7.4.1 | ScalareSwitchStormFrameTypeRegulated | read-write | mandatory | Specifies what types of frames with group destination addresses are currently being regulated. Only the specified class of traffic is considered in detecting t… |
| 1.3.6.1.4.1.36.2.18.11.7.4.2 | ScalareSwitchStormPollingInterval | read-write | mandatory | The length of the interval in 10 millisecond units between successive instants when the storm control process examines the broadcast/multicast received frame c… |
| 1.3.6.1.4.1.36.2.18.11.7.4.3 | ScalareSwitchStormRateLimit | read-write | mandatory | The maximum number of regulated group address frames (broadcast, multicast, or a mixture of both - see eSwitchStormFrameTypeRegulated) that may be received on … |
| 1.3.6.1.4.1.36.2.18.11.7.4.4 | ScalareSwitchStormControlAction | read-write | mandatory | The action that the storm control process should take when storm conditions are detected on a port. Frame suppression consists of suspending the forwarding of … |
| 1.3.6.1.4.1.36.2.18.11.7.4.5 | ScalareSwitchStormResumptionPolicy | read-write | mandatory | The policy used by the storm control process to resume normal operation, once storm control action has been initiated. If continue-control(1) is specified, the… |
| 1.3.6.1.4.1.36.2.18.11.7.4.6 | ScalareSwitchStormAutoInterval | read-write | mandatory | This parameter is used when the eSwitchStormResumptionPolicy specified is auto -interval(2). Normal operation is automatically resumed on the offending port af… |
| 1.3.6.1.4.1.36.2.18.11.7.4.7 | ScalareSwitchStormFramesLost | read-only | mandatory | The number of regulated frames (broadcast, multicast or both, depending on the value of the object: eSwitchStormFrameTypeRegulated) received on any port that w… |
| 1.3.6.1.4.1.36.2.18.11.7.4.8 | ScalareSwitchStormActionsInitiated | read-only | mandatory | The number of times that storm control action was initiated on any port on the switch. |
| 1.3.6.1.4.1.36.2.18.11.7.4.9 | TableeSwitchStormPortTable | not-accessible | mandatory | A table that contains storm status information for every port on the switch. |
| 1.3.6.1.4.1.36.2.18.11.7.4.9.1 | RoweSwitchStormPortEntry | not-accessible | mandatory | A list of storm control related information items for every port on the switch. |
| 1.3.6.1.4.1.36.2.18.11.7.4.9.1.1 | ColumneSwitchStormPortIndex | read-only | mandatory | The port number of the switch port for which this entry contains storm control related information. |
| 1.3.6.1.4.1.36.2.18.11.7.4.9.1.2 | ColumneSwitchStormPortControlStatus | read-only | mandatory | The current status of storm control on the port. The value inactive(1) indicates that no storm control action is currently in effect on the port. The value act… |
| 1.3.6.1.4.1.36.2.18.11.7.4.9.1.3 | ColumneSwitchStormPortFramesLost | read-only | mandatory | The number of regulated frames (broadcast, multicast or both, depending on the value of the object: eSwitchStormFrameTypeRegulated) received on this port that … |
| 1.3.6.1.4.1.36.2.18.11.7.4.9.1.4 | ColumneSwitchStormPortActionsInitiated | read-only | mandatory | The number of times that storm control action was initiated on this port on the switch. |
| 1.3.6.1.4.1.36.2.18.11.7.5 | NodeeSwitchSecurity | |||
| 1.3.6.1.4.1.36.2.18.11.7.5.1 | ScalareSwitchSecurityViolationsDetected | read-only | mandatory | The total number of security violations detected on all the ports on this switch, since the switch was last reset. Depending on the implementation, a switch ma… |
| 1.3.6.1.4.1.36.2.18.11.7.5.2 | TableeSwitchSecurityPortTable | not-accessible | mandatory | A table that contains information about the type of secure mode currently in effect on each port of the switch. |
| 1.3.6.1.4.1.36.2.18.11.7.5.2.1 | RoweSwitchSecurityPortEntry | not-accessible | mandatory | A list that contains the port number and the type of security mode currently in effect on the port for a switch port. |
| 1.3.6.1.4.1.36.2.18.11.7.5.2.1.1 | ColumneSwitchSecurityPortIndex | read-only | mandatory | The port number of the switch port for which this entry defines the type of secure mode. |
| 1.3.6.1.4.1.36.2.18.11.7.5.2.1.2 | ColumneSwitchSecurityPortMode | read-write | mandatory | The type of security currently in effect on the switch port. A value of none(1) indicates that the port is not currently in the secure mode of operation. A val… |
| 1.3.6.1.4.1.36.2.18.11.7.5.2.1.3 | ColumneSwitchSecurityPortViolationsDetected | read-only | mandatory | The number of security violations detected on this port, since the port entered its current mode of security. Depending on the implementation, a switch may not… |
| 1.3.6.1.4.1.36.2.18.11.7.5.2.1.4 | ColumneSwitchSecurityPortViolationResponse | read-write | mandatory | The policy for dealing with security violations on this switch port. A security violation is deemed to have occured, when a frame with an unauthorized source a… |
| 1.3.6.1.4.1.36.2.18.11.7.5.2.1.5 | ColumneSwitchSecurityPortMaxAuthAddr | read-only | mandatory | The maximum number of addresses that may be authorized on this port, when the port is in the manual-authorize(2) secure mode. When the port is in the auto-auth… |
| 1.3.6.1.4.1.36.2.18.11.7.5.2.1.6 | ColumneSwitchSecurityPortMaxAutoAuthAddr | read-write | mandatory | The maximum number of addresses that may be authorized on this port, when the port is in the auto-authorize(3) secure mode. The value of this object may not ex… |
| 1.3.6.1.4.1.36.2.18.11.7.5.2.1.7 | ColumneSwitchSecurityPortCurrAuthAddr | read-only | mandatory | The number of addresses currently authorized on this port. If the current type of secure mode on this port as given by the corresponding instance of eSwitchSec… |
| 1.3.6.1.4.1.36.2.18.11.7.5.2.1.8 | ColumneSwitchSecurityPortPurgeAuthAddr | read-write | mandatory | This object when set to the value trigger(1) causes all the currently authorized addresses on the port to be purged. |
| 1.3.6.1.4.1.36.2.18.11.7.5.3 | TableeSwitchSecurityAuthTable | not-accessible | mandatory | A table that lists the set of addresses that are authorized on a port for each port of the switch. |
| 1.3.6.1.4.1.36.2.18.11.7.5.3.1 | RoweSwitchSecurityAuthEntry | not-accessible | mandatory | An address authorization entry that consists of a port and an address authorized on the port. |
| 1.3.6.1.4.1.36.2.18.11.7.5.3.1.1 | ColumneSwitchSecurityAuthPort | read-write | mandatory | The port number of the switch port for which this entry defines an authorized address. |
| 1.3.6.1.4.1.36.2.18.11.7.5.3.1.2 | ColumneSwitchSecurityAuthAddress | read-write | mandatory | The address that this entry authorizes on the port specified by the corresponding instance of the object eSwitchSecurityAuthPort. |
| 1.3.6.1.4.1.36.2.18.11.7.5.3.1.3 | ColumneSwitchSecurityAuthStatus | read-write | mandatory | This object when set to the value invalid(1) deletes the corresponding authorized address entry, i.e., the address is no longer authorized on the port associat… |
| 1.3.6.1.4.1.36.2.18.11.7.5.4 | NodeeSwitchSecurityLog | |||
| 1.3.6.1.4.1.36.2.18.11.7.5.4.1 | ScalareSwitchSecurityLogMaxEntries | read-only | mandatory | The maximum number of security violation entries that will be retained in the security log table: eSwitchSecurityLogTable. If more security violations than thi… |
| 1.3.6.1.4.1.36.2.18.11.7.5.4.2 | TableeSwitchSecurityLogTable | not-accessible | mandatory | A table that contains a log of security violations indexed by violating address and violated port. |
| 1.3.6.1.4.1.36.2.18.11.7.5.4.2.1 | RoweSwitchSecurityLogEntry | not-accessible | mandatory | A security log entry that consists of a violating address, the port on which this address was seen, and the sysUpTime at the time the violation was detected. |
| 1.3.6.1.4.1.36.2.18.11.7.5.4.2.1.1 | ColumneSwitchSecurityLogIndex | read-only | mandatory | The index corresponding to this log entry. The earliest recorded entry has the smallest value. This object ranges in value from 1 to the value of the following… |
| 1.3.6.1.4.1.36.2.18.11.7.5.4.2.1.2 | ColumneSwitchSecurityLogPort | read-only | mandatory | The port number of the switch port on which this violation occured. |
| 1.3.6.1.4.1.36.2.18.11.7.5.4.2.1.3 | ColumneSwitchSecurityLogAddress | read-only | mandatory | The violating address that caused this entry to be logged. |
| 1.3.6.1.4.1.36.2.18.11.7.5.4.2.1.4 | ColumneSwitchSecurityLogResetNumber | read-only | mandatory | The value of pcomErrLogResetNumber at the time this entry was logged. |
| 1.3.6.1.4.1.36.2.18.11.7.5.4.2.1.5 | ColumneSwitchSecurityLogTime | read-only | mandatory | The time in 10 millisecond clock ticks since the switch was last reset, at which the violation recorded by this entry occured. |