ETH-OPT-MIB
41 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter enterprises |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.449 | Nodecodex | |||
| 1.3.6.1.4.1.449.2 | NodecdxProductSpecific | |||
| 1.3.6.1.4.1.449.2.1 | Nodecdx6500 | |||
| 1.3.6.1.4.1.449.2.1.2 | Nodecdx6500Configuration | |||
| 1.3.6.1.4.1.449.2.1.2.1 | Nodecdx6500CfgProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.2.1.1 | Nodecdx6500PCTPortProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.2.1.1.8 | Tablecdx6500PPCTdot3PortTable | not-accessible | mandatory | This table contains Ethernet interface parameters and state variables, one entry per 802.3 interface. |
| 1.3.6.1.4.1.449.2.1.2.1.1.8.1 | Rowcdx6500PPCTdot3PortEntry | not-accessible | mandatory | A list of Ethernet status and parameter values for an 802.3 interface. |
| 1.3.6.1.4.1.449.2.1.2.1.1.8.1.1 | Columncdx6500dot3IfIndex | read-only | mandatory | This object is the port number for the Interface. |
| 1.3.6.1.4.1.449.2.1.2.1.1.8.1.2 | Columncdx6500dot3LanCableType | read-write | mandatory | Two LAN connectors are provided and only one connector, selected by software, is active at any given time. This parameter specifies the type of cable and there… |
| 1.3.6.1.4.1.449.2.1.2.1.1.8.1.3 | Columncdx6500dot3PortMacAddress | read-write | mandatory | Specifies the MAC address of the LAN port. The entered value of 00-00-00-00-00-00 will be replaced by the Burned In Address (BIA) if the LAN hardware is presen… |
| 1.3.6.1.4.1.449.2.1.2.1.1.8.1.4 | Columncdx6500dot3TransmitQueueLimit | read-write | mandatory | Number of frames that can be queued on the LAN transmitter before any frame is dropped. |
| 1.3.6.1.4.1.449.2.1.2.1.1.8.1.5 | Columncdx6500dot3CollisionSensitivity | read-write | mandatory | This parameter specifies the width required of the collision detection signal, in bit times, before it is recognized that a collision has occurred. |
| 1.3.6.1.4.1.449.2.1.2.1.1.8.1.6 | Columncdx6500dot3CarrierSensitivity | read-write | mandatory | This parameter specifies the width required of the carrier sense signal in bit times, before it is recognized as being active. Carrier sense deactivation is re… |
| 1.3.6.1.4.1.449.2.1.2.1.1.8.1.7 | Columncdx6500dot3BridgeLinkNum | read-write | mandatory | This parameter specifies the bridge link number associated with this LAN port. |
| 1.3.6.1.4.1.449.2.1.2.1.1.8.1.8 | Columncdx6500dot3RouterIfNum | read-write | mandatory | This parameter specifies the router interface number associated with this LAN port. |
| 1.3.6.1.4.1.449.2.1.2.1.1.8.1.9 | Columncdx6500dot3DuplexMode | read-write | mandatory | This parameter specifies whether this LAN port should run in either Half-Duplex or Full-Duplex mode. |
| 1.3.6.1.4.1.449.2.1.3 | Nodecdx6500Statistics | |||
| 1.3.6.1.4.1.449.2.1.3.1 | Nodecdx6500StatProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.3.1.1 | Nodecdx6500PSTPortProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.3.1.1.8 | Tablecdx6500PPSTdot3PortTable | not-accessible | mandatory | A table containing Ethernet statistics, one entry per 802.3 interface. All the statistics are defined using the syntax Counter as 32-bit wrap around counters. … |
| 1.3.6.1.4.1.449.2.1.3.1.1.8.1 | Rowcdx6500PPSTdot3PortEntry | not-accessible | mandatory | An entry contains the 802.3 statistics for a particular interface. |
| 1.3.6.1.4.1.449.2.1.3.1.1.8.1.1 | Columncdx6500dot3StatsIfIndex | read-only | mandatory | The value of this object identifies the 802.3 interface for which this entry contains management information. It is also the port number of the interface. |
| 1.3.6.1.4.1.449.2.1.3.1.1.8.1.2 | Columncdx6500dot3StatsPortType | read-only | mandatory | The configured value of the Port type. |
| 1.3.6.1.4.1.449.2.1.3.1.1.8.1.3 | Columncdx6500dot3StatsRxShortFrames | read-only | mandatory | This counter is incremented when the LAN port observes a receive or transmitted frame which is less than 18 bytes. |
| 1.3.6.1.4.1.449.2.1.3.1.1.8.1.4 | Columncdx6500dot3StatsRxCollisions | read-only | mandatory | This counter is incremented when the LAN port observes collisions. |
| 1.3.6.1.4.1.449.2.1.3.1.1.8.1.5 | Columncdx6500dot3StatsRxLongFrames | read-only | mandatory | This counter is incremented when the LAN port observes a frame that can not be forwarded because of excessive length. |
| 1.3.6.1.4.1.449.2.1.3.1.1.8.1.6 | Columncdx6500dot3StatsTxDiscards | read-only | mandatory | This counter is incremented when the LAN port discards the frame because the transmit queue exceeds the maximum queue length. |
| 1.3.6.1.4.1.449.2.1.3.1.1.8.1.7 | Columncdx6500dot3StatsDataBytesRx | read-only | mandatory | This counter is incremented for each data byte received by the LAN port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.8.1.8 | Columncdx6500dot3StatsDataBytesTx | read-only | mandatory | This counter is incremented for each data byte transmitted by the LAN port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.8.1.9 | Columncdx6500dot3StatsPortStatus | read-only | mandatory | Indicates the status of the LAN port. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility. |
| 1.3.6.1.4.1.449.2.1.3.1.1.8.1.10 | Columncdx6500dot3StatsLastStatReset | read-only | mandatory | Time stamp when the statistics were last reset. |
| 1.3.6.1.4.1.449.2.1.3.1.1.8.1.11 | Columncdx6500dot3StatsClearStats | write-only | mandatory | This is the command to reset the LAN port statistics. |
| 1.3.6.1.4.1.449.2.1.3.1.1.8.1.12 | Columncdx6500dot3StatsCommand | write-only | mandatory | This is a control for the 802.3 port. enable : will enable the port. boot : will boot the port. disable : will disable the port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.8.1.13 | Columncdx6500dot3Statsframesin | read-only | mandatory | This counter is incremented for each frame received by the LAN port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.8.1.14 | Columncdx6500dot3Statsframesout | read-only | mandatory | This counter is incremented for each frame transmitted by the LAN port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.8.1.15 | Columncdx6500dot3Statsfpsin | read-only | mandatory | This stat specifies the number of frames per second received by the LAN port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.8.1.16 | Columncdx6500dot3Statsfpsout | read-only | mandatory | This stat specifies the number of frames per second transmitted by the LAN port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.8.1.17 | Columncdx6500dot3Statshadiscards | read-only | mandatory | This counter specifies the number of frames the HA discarded. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DisplayString | OCTET STRING | ||
| MacAddress | OCTET STRING (SIZE (6)) |