ETHERNET-CONFIGURATION
13 objects
The public Ethernet access software supports a number of standard and proprietary MIBs. This MIB module defines objects for reading/writing common Ethernet information. In cases where the network element is overloaded with traffic, it must be ensured that the high priority packets are always processed first. This is done using an overload protection mechanism that is always active. The downstream traffic from the aggregate uplink Ethernet will be processed according to priority. The overload protection is only in use if there is more than one packet waiting to be processed. There are a number of receive priorities in the network element downstream overload protection. This MIB can be used to configure the mapping between VLAN priority of downstream packets and the receive priority in the network element. Statistics for the receive priorities can also be read with this MIB.
Imported Objects
| PEA-INTERFACES-SMI | peaInterfaces |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.193.72.600.10.20 | IdentityethernetConfiguration | The public Ethernet access software supports a number of standard and proprietary MIBs. This MIB module defines objects for reading/writing common Ethernet inf… | ||
| 1.3.6.1.4.1.193.72.600.10.20.20 | NodeuplinkEthernetRxScheduling | |||
| 1.3.6.1.4.1.193.72.600.10.20.20.10 | ScalarnumberOfRxPriorities | read-only | current | With this parameter it is possible to read the number of available receive priorities, which can be used when mapping VLAN tagged incoming downstream packets f… |
| 1.3.6.1.4.1.193.72.600.10.20.20.15 | TablevlanPrioToRxPriorityMappingTable | not-accessible | current | Different operators uses different VLAN p-bit classification of services. In addition to voice, video and best effort data services, it may also be required to… |
| 1.3.6.1.4.1.193.72.600.10.20.20.15.5 | RowvlanPrioToRxPriorityMappingEntry | not-accessible | current | This is an entry of the vlanPrioToRxPriorityMappingTable Following example map highest VLAN priority to highest rxPriority. Any combinations of mappings are va… |
| 1.3.6.1.4.1.193.72.600.10.20.20.15.5.5 | ColumnvlanPrioToRxPriorityIndex | not-accessible | current | This is the index to the vlanPrioToRxPriorityMappingTable. |
| 1.3.6.1.4.1.193.72.600.10.20.20.15.5.10 | ColumnvlanPriority | read-only | current | This is the VLAN priority to be mapped to a receive queue priority. VLAN priority zero is the lowest priority. |
| 1.3.6.1.4.1.193.72.600.10.20.20.15.5.15 | ColumnrxPriority | read-write | current | Incoming packets received on the uplink interface with the VLAN priority equal to vlanPriority in the vlanPrioToRxQueuePrioMappingEntry, are mapped to the rece… |
| 1.3.6.1.4.1.193.72.600.10.20.20.20 | TablerxPriorityStatisticsTable | not-accessible | current | This table is used to read out statistics counters per receive priority. Statistics are available for packets delivered to a higher-layer, packets discarded du… |
| 1.3.6.1.4.1.193.72.600.10.20.20.20.5 | RowrxPriorityStatisticsEntry | not-accessible | current | This is an entry of the rxPriorityStatisticsTable |
| 1.3.6.1.4.1.193.72.600.10.20.20.20.5.5 | ColumnrxPriorityStatisticsPkts | read-only | current | Number of successfully received packets for the specific receive priority. |
| 1.3.6.1.4.1.193.72.600.10.20.20.20.5.10 | ColumnrxPriorityStatisticsDiscards | read-only | current | Number of packets discarded due to no available buffers for the specific receive priority. |
| 1.3.6.1.4.1.193.72.600.10.20.20.20.5.15 | ColumnrxPriorityStatisticsErrors | read-only | current | Number of packets discarded due to any other reason than no buffers available for the specific receive priority. |