EXTREME-CABLE-MIB
48 objects
Extreme-specific Cable objects
Imported Objects
| EXTREME-BASE-MIB | extremeAgent extremenetworks extremeV2Traps |
| RFC1213-MIB | DisplayString |
| SNMPv2-SMI | MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1916.1.24 | IdentityextremeCable | Extreme-specific Cable objects | ||
| 1.3.6.1.4.1.1916.1.24.1 | NodeextremeDiagConfigGroup | |||
| 1.3.6.1.4.1.1916.1.24.1.1 | ScalarextremeDiagConfigTime | read-write | current | Indicates the time at which the Diagnostics information will be collected for the ports which have Auto-Diagnostics configured. Time must be given in hh:mm:ss … |
| 1.3.6.1.4.1.1916.1.24.1.2 | ScalarextremeDiagConfigRoF | read-write | current | Indicates whether a port should return to INIT state on Diagnostics Failure. If TRUE the port will be restarted even if the Diagnostics indicate a Failure. If … |
| 1.3.6.1.4.1.1916.1.24.2 | TableextremeDiagPortConfigTable | not-accessible | current | Table, which contains the diagnostic configuration information for the ports |
| 1.3.6.1.4.1.1916.1.24.2.1 | RowextremeDiagPortConfigEntry | not-accessible | current | Each row represents port related diagnostics configuration |
| 1.3.6.1.4.1.1916.1.24.2.1.1 | ColumnextremeDiagPortCfgPortIfIndex | read-only | current | IfIndex of the Port for which the information in this row applies |
| 1.3.6.1.4.1.1916.1.24.2.1.2 | ColumnextremeDiagPortCfgMode | read-only | current | The mode of operation. The port can be configured to have either manual diagnostics or auto-diagnostics collected. |
| 1.3.6.1.4.1.1916.1.24.2.1.3 | ColumnextremeDiagPortCfgStatus | read-write | current | Specifies whether Diagnostics are enabled or disabled for the port. In the manual mode, enable and disable will disable the corresponding bit in the manual Dia… |
| 1.3.6.1.4.1.1916.1.24.3 | TableextremeDiagPortDiagTable | not-accessible | current | Table contains the diagnostic information for the ports |
| 1.3.6.1.4.1.1916.1.24.3.1 | RowextremeDiagPortDiagEntry | not-accessible | current | Each row represents port related diagnostics information |
| 1.3.6.1.4.1.1916.1.24.3.1.1 | ColumnextremeDiagPortDiagPortIfIndex | read-only | current | IfIndex of the Port for which the information in this row applies |
| 1.3.6.1.4.1.1916.1.24.3.1.2 | ColumnextremeDiagPortDiagMode | read-only | current | The mode of operation. The port can be configured to have either manual diagnostics or auto-diagnostics collected. |
| 1.3.6.1.4.1.1916.1.24.3.1.3 | ColumnextremeDiagPortSpeed | read-only | current | Specifies the speed of the port |
| 1.3.6.1.4.1.1916.1.24.3.1.4 | ColumnextremeDiagPortSwapAB | read-only | current | Specifies whether pairA pairB cables are swapped |
| 1.3.6.1.4.1.1916.1.24.3.1.5 | ColumnextremeDiagPortSwapCD | read-only | current | Specifies whether pairC and pairD cables are swapped |
| 1.3.6.1.4.1.1916.1.24.3.1.6 | ColumnextremeDiagPortPairAPol | read-only | current | Specifies the polarity of pairA cables |
| 1.3.6.1.4.1.1916.1.24.3.1.7 | ColumnextremeDiagPortPairAFlen | read-only | current | Specifies the distance of Fault in the pairA cables |
| 1.3.6.1.4.1.1916.1.24.3.1.8 | ColumnextremeDiagPortPairALen | read-only | current | Specifies the length of the pairA cables |
| 1.3.6.1.4.1.1916.1.24.3.1.9 | ColumnextremeDiagPortPairASkew | read-only | current | Skew of pairA cables with respect to the fastest pair |
| 1.3.6.1.4.1.1916.1.24.3.1.10 | ColumnextremeDiagPortPairAStatus | read-only | current | Indicates whether pairA cables are properly terminated, short or open |
| 1.3.6.1.4.1.1916.1.24.3.1.11 | ColumnextremeDiagPortPairBPol | read-only | current | Specifies the polarity of pairB cables |
| 1.3.6.1.4.1.1916.1.24.3.1.12 | ColumnextremeDiagPortPairBFlen | read-only | current | Specifies the distance of Fault in the pairB cables |
| 1.3.6.1.4.1.1916.1.24.3.1.13 | ColumnextremeDiagPortPairBLen | read-only | current | Specifies the length of the pairB cables |
| 1.3.6.1.4.1.1916.1.24.3.1.14 | ColumnextremeDiagPortPairBSkew | read-only | current | Skew of pairB cables with respect to the fastest pair |
| 1.3.6.1.4.1.1916.1.24.3.1.15 | ColumnextremeDiagPortPairBStatus | read-only | current | Indicates whether pairB cables are properly terminated, short or open |
| 1.3.6.1.4.1.1916.1.24.3.1.16 | ColumnextremeDiagPortPairCPol | read-only | current | Specifies the polarity of pairC cables |
| 1.3.6.1.4.1.1916.1.24.3.1.17 | ColumnextremeDiagPortPairCFlen | read-only | current | Specifies the distance of Fault in the pairC cables |
| 1.3.6.1.4.1.1916.1.24.3.1.18 | ColumnextremeDiagPortPairCLen | read-only | current | Specifies the length of the pairC cables |
| 1.3.6.1.4.1.1916.1.24.3.1.19 | ColumnextremeDiagPortPairCSkew | read-only | current | Skew of pairC cables with respect to the fastest pair |
| 1.3.6.1.4.1.1916.1.24.3.1.20 | ColumnextremeDiagPortPairCStatus | read-only | current | Indicates whether pairC cables are properly terminated, short or open |
| 1.3.6.1.4.1.1916.1.24.3.1.21 | ColumnextremeDiagPortPairDPol | read-only | current | Specifies the polarity of pairD cables |
| 1.3.6.1.4.1.1916.1.24.3.1.22 | ColumnextremeDiagPortPairDFlen | read-only | current | Specifies the distance of Fault in the pairD cables |
| 1.3.6.1.4.1.1916.1.24.3.1.23 | ColumnextremeDiagPortPairDLen | read-only | current | Specifies the length of the pairD cables |
| 1.3.6.1.4.1.1916.1.24.3.1.24 | ColumnextremeDiagPortPairDSkew | read-only | current | Skew of pairD cables with respect to the fastest pair |
| 1.3.6.1.4.1.1916.1.24.3.1.25 | ColumnextremeDiagPortPairDStatus | read-only | current | Indicates whether pairD cables are properly terminated, short or open |
| 1.3.6.1.4.1.1916.1.24.3.1.26 | ColumnextremeDiagPortDateTime | read-only | current | Date and time at which the Diagnostic information was collected |
| 1.3.6.1.4.1.1916.1.24.4 | TableextremeDiagPortStatsTable | not-accessible | current | Table, which contains the diagnostic statistic information for the ports |
| 1.3.6.1.4.1.1916.1.24.4.1 | RowextremeDiagPortStatsEntry | not-accessible | current | Each row represents port related diagnostics statistics information |
| 1.3.6.1.4.1.1916.1.24.4.1.1 | ColumnextremeDiagPortStatsPortIfIndex | read-only | current | IfIndex of the Port for which the information in this row applies |
| 1.3.6.1.4.1.1916.1.24.4.1.2 | ColumnextremeDiagPortStatsNumDiag | read-only | current | Number of times Diagnostics information collected for this port |
| 1.3.6.1.4.1.1916.1.24.4.1.3 | ColumnextremeDiagPortStatsNumSuccess | read-only | current | Number of times Diagnostics for this port completed successfully without any errors |
| 1.3.6.1.4.1.1916.1.24.4.1.4 | ColumnextremeDiagPortStatsNumFail | read-only | current | Number of times Diagnostics for this port Failed due to errors in the cable pairs |
| 1.3.6.1.4.1.1916.1.24.4.1.5 | ColumnextremeDiagPortStatsNumChange | read-only | current | Number of times Diagnostics Changed for this port |
| 1.3.6.1.4.1.1916.1.24.4.1.6 | ColumnextremeDiagPortStatsNumAbort | read-only | current | Number of times Diagnostics was aborted by the user for this port |
| 1.3.6.1.4.1.1916.4.13 | NodeextremeCableTraps | |||
| 1.3.6.1.4.1.1916.4.13.0 | NodeextremeCableTrapsPrefix | |||
| 1.3.6.1.4.1.1916.4.13.0.1 | NotificationextremeTrapDiagPortDiagnostics | current | Indicates the status of Diagnostics for a port. The status indicates whether Diagnostics for a particular port failed |