EXTREME-SUMMIT-WM-DOT11-EXTNS-MIB
79 objects
Summit WM Dot11 extensions MIB. This module provides extension objects to the ieee80211 MIB.
Imported Objects
| EXTREME-SUMMIT-WM-SMI | summitWMMgmt summitWMModules |
| IEEE802dot11-MIB | dot11WEPDefaultKeyIndex |
| IF-MIB | ifIndex InterfaceIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter64 Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1916.5.3.1 | Nodedot11ExtnsMib | |||
| 1.3.6.1.4.1.1916.5.3.1.1 | Nodedot11Extsmt | |||
| 1.3.6.1.4.1.1916.5.3.1.1.1 | Tabledot11ExtBSSIDTable | not-accessible | current | The dot11ExtBSSIDTable contains a list of the BSS (Basic Service Set) Identifiers supported by each radio, and associates an SSID with with each BSS. |
| 1.3.6.1.4.1.1916.5.3.1.1.1.1 | Rowdot11ExtBSSIDEntry | not-accessible | current | An entry in the BSSID table. |
| 1.3.6.1.4.1.1916.5.3.1.1.1.1.1 | Columndot11ExtBSSIndex | read-only | current | A unique value, greater than zero, that identifies each Basic Service Set Identifier (BSSID) supported by a radio. |
| 1.3.6.1.4.1.1916.5.3.1.1.1.1.2 | Columndot11ExtBSSID | read-only | current | The Basic Service Set Identifier (BSSID) uniquely identifies a wireless network adapter. In the case of the altitue350, a radio can support up to 8 distinct BS… |
| 1.3.6.1.4.1.1916.5.3.1.1.1.1.3 | Columndot11ExtSSIDID | read-write | current | SSIDID is a Extreme Summit WM internal numeric identifier for the SSID. This number is meaningless external to the product. |
| 1.3.6.1.4.1.1916.5.3.1.1.1.1.4 | Columndot11ExtSSID | read-write | current | The Service Set Identifier (SSID) is the network name identifying the wireless network to which this adapter belongs. |
| 1.3.6.1.4.1.1916.5.3.1.1.1.1.5 | Columndot11ExtBSSIDWEPKeyIndex | read-write | current | Specifies the WEP default key associated with this BSS from the ieee802dot11 dot11WEPDefaultKeysTable. |
| 1.3.6.1.4.1.1916.5.3.1.1.1.1.6 | Columndot11ExtSSIDSuppress | read-write | current | When True, the radio will not broadcast the SSID associated with this BSSID in the beacons. |
| 1.3.6.1.4.1.1916.5.3.1.1.1.1.7 | Columndot11ExtPriorityTrafficHandling | read-write | current | When True, priority traffic handling is enabled for this BSSID. |
| 1.3.6.1.4.1.1916.5.3.1.1.2 | Tabledot11ExtWEPKeyMappingsTable | not-accessible | current | The dot11ExtWEPKeyMappingsTable supports the ability to configure a separate WEP key for each BSS/Station pairing. The WEPKeyMappingValues in this table are lo… |
| 1.3.6.1.4.1.1916.5.3.1.1.2.1 | Rowdot11ExtWEPKeyMappingsEntry | not-accessible | current | An entry in the dot11ExtWEPKeyMappingsTable. |
| 1.3.6.1.4.1.1916.5.3.1.1.2.1.1 | Columndot11ExtWEPKeyMappingIndex | read-only | current | The auxiliary variable used to identify instances of the columnar objects in the WEP Key Mappings Table. |
| 1.3.6.1.4.1.1916.5.3.1.1.2.1.2 | Columndot11ExtWEPKeyMappingAddress | read-create | current | The MAC address of the STA for which the values from this key mapping entry are to be used. |
| 1.3.6.1.4.1.1916.5.3.1.1.2.1.3 | Columndot11ExtWEPKeyMappingWEPOn | read-create | current | Boolean as to whether WEP is to be used when communicating with the dot11WEPKeyMappingAddress STA. |
| 1.3.6.1.4.1.1916.5.3.1.1.2.1.4 | Columndot11ExtWEPKeyMappingValue | read-create | current | A WEP secret key value. |
| 1.3.6.1.4.1.1916.5.3.1.1.2.1.5 | Columndot11ExtWEPKeyMappingStatus | read-create | current | The status column used for creating, modifying, and deleting instances of the columnar objects in the WEP key mapping Table. |
| 1.3.6.1.4.1.1916.5.3.1.1.3 | Tabledot11CapabilitiesTable | not-accessible | current | The dot11CapabilitiesTable contains the 802.11 protocols that each radio in the accessPoint are capable of supporting. |
| 1.3.6.1.4.1.1916.5.3.1.1.3.1 | Rowdot11CapabilitiesEntry | not-accessible | current | An entry in the dot11CapabilitiesTable. |
| 1.3.6.1.4.1.1916.5.3.1.1.3.1.1 | Columndot11Capabilities | read-write | current | Describes the capabilities of a radio, for example the protocol supported. |
| 1.3.6.1.4.1.1916.5.3.1.1.4 | Tabledot11bConfigTable | not-accessible | current | The table contains configuration elements specific to the 802.11b protocol. |
| 1.3.6.1.4.1.1916.5.3.1.1.4.1 | Rowdot11bConfigEntry | not-accessible | current | The dot11bConfigTable contains configuration elements specific to the 802.11b protocol. If an attempt to read the elements is made for a radio which does not s… |
| 1.3.6.1.4.1.1916.5.3.1.1.4.1.1 | Columndot11bEnabled | read-write | current | When true, 802.1b protocol support is active on this radio. |
| 1.3.6.1.4.1.1916.5.3.1.1.4.1.2 | Columndot11BasicB | read-write | current | Specifies the basic rate set for a 11b or 11b+g radio. When set to basic11b, the radio uses all four 11b rates (1, 2, 5.5 and 11 Mbps) as basic rates. When whe… |
| 1.3.6.1.4.1.1916.5.3.1.1.5 | Tabledot11gConfigTable | not-accessible | current | The dot11gConfigTable contains configuration elements specific to the 802.11g protocol. If an attempt to read the elements is made for a radio which does not s… |
| 1.3.6.1.4.1.1916.5.3.1.1.5.1 | Rowdot11gConfigEntry | not-accessible | current | An entry in the dot11gConfigTable. |
| 1.3.6.1.4.1.1916.5.3.1.1.5.1.1 | Columndot11gEnabled | read-write | current | When true, 802.1g protocol support is active on this radio. |
| 1.3.6.1.4.1.1916.5.3.1.1.5.1.3 | Columndot11gProtectionMode | read-write | current | Configures whether and when to use Protection Mode for the 802.11g transmissions. Protection Mode helps reduce collisions with legacy 802.11b stations at the e… |
| 1.3.6.1.4.1.1916.5.3.1.1.5.1.4 | Columndot11gProtectionType | read-write | current | Determines whether 802.11g Protection Mode uses a RTS-CTS sequence or a CTS-only protection mechanism when Protection Mode is enabled. |
| 1.3.6.1.4.1.1916.5.3.1.1.5.1.5 | Columndot11gProtectionRate | read-write | current | Specifies the rate to be used by RTS or CTS in protection mode. |
| 1.3.6.1.4.1.1916.5.3.1.1.5.1.6 | Columndot11gBasicG | read-write | current | Specifies the set of basic rates in 11-g-only mode. Default allows all possible basic rates (1, 2, 5.5, 11, 6, 12 and 24 Mbps). Basic11 specifies only 11 rates… |
| 1.3.6.1.4.1.1916.5.3.1.1.7 | Tabledot11ExtSmtTable | not-accessible | current | Extended settings table. |
| 1.3.6.1.4.1.1916.5.3.1.1.7.1 | Rowdot11ExtSmtEntry | not-accessible | current | An entry in the Extended settings table dot11ExtSmtTable. |
| 1.3.6.1.4.1.1916.5.3.1.1.7.1.1 | ColumnsmtShortPreambleInvoked | read-write | current | Specifies the type of preamble used in an 11b/g radio: always short, always long or automatically selected. |
| 1.3.6.1.4.1.1916.5.3.1.1.7.1.2 | Columndot11ExtSmtCurrentChannel | read-write | current | Specfies the current rdio channel. |
| 1.3.6.1.4.1.1916.5.3.1.1.7.1.3 | Columndot11ExtSmtMaxBasicRate | read-write | current | Specifies the maximum basic rate. |
| 1.3.6.1.4.1.1916.5.3.1.1.7.1.4 | Columndot11ExtSmtMinBasicRate | read-write | current | Specifies the minimum basic rate which is also the minimum operational rate. |
| 1.3.6.1.4.1.1916.5.3.1.1.7.1.5 | Columndot11ExtSmtMaxOperationalRate | read-write | current | Specifies the maximum operational rate. |
| 1.3.6.1.4.1.1916.5.3.1.1.8 | Tabledot11ExtVlanSmtTable | not-accessible | current | This table contains configuration about bridging mode for the radio. |
| 1.3.6.1.4.1.1916.5.3.1.1.8.1 | Rowdot11ExtVlanSmtEntry | not-accessible | current | An entry in dot11ExtVlanSmtTable table. |
| 1.3.6.1.4.1.1916.5.3.1.1.8.1.1 | ColumnvlanBridgeMode | read-write | current | When true, bridging mode is enabled on this radio. |
| 1.3.6.1.4.1.1916.5.3.1.1.8.1.2 | ColumnvlanTag | read-write | current | Integer specifying the VLAN tag. If untagged, returns -1. |
| 1.3.6.1.4.1.1916.5.3.1.2 | Nodedot11ExtAPObjs | |||
| 1.3.6.1.4.1.1916.5.3.1.2.2 | Tabledot1XConfigTable | not-accessible | current | Conceptual table for 802.1X settings required for wireless security. |
| 1.3.6.1.4.1.1916.5.3.1.2.2.1 | Rowdot1XConfigEntry | not-accessible | current | An entry in dot1XConfigTable table. |
| 1.3.6.1.4.1.1916.5.3.1.2.2.1.1 | Columndot1XEnabled | read-write | current | Enable 802.1X authentication for this BSSID. |
| 1.3.6.1.4.1.1916.5.3.1.2.2.1.2 | Columndot1XDynamicRekeyingInterval | read-write | current | This object defines the time period, in seconds, after which the key value must be updated. |
| 1.3.6.1.4.1.1916.5.3.1.2.2.1.3 | Columndot1XWPA1Enabled | read-write | current | Enables WPA.1 (Wi-Fi Protected Access) on this BSSID |
| 1.3.6.1.4.1.1916.5.3.1.2.2.1.4 | Columndot1XWPAPassphrase | read-write | current | Specifies the WPA passphrase for the BSSID. This element is logically write only. Any attempt to read this element will result in null or 0. |
| 1.3.6.1.4.1.1916.5.3.1.2.2.1.5 | Columndot1XWPACipherType | read-write | current | Defines the encryption algoritms allowed with WPA: only TKIP if tkipOnly or both AES and TKIP if auto. |
| 1.3.6.1.4.1.1916.5.3.1.2.2.1.6 | Columndot1XWPA2Enabled | read-write | current | When true, WPA v.2 support is enabled. |
| 1.3.6.1.4.1.1916.5.3.1.4 | Nodedot11ExtCounters | |||
| 1.3.6.1.4.1.1916.5.3.1.4.1 | TableassocGroupTable | not-accessible | current | STA statistics table. |
| 1.3.6.1.4.1.1916.5.3.1.4.1.1 | RowassocGroupEntry | not-accessible | current | Entry in the STA statistics table. |
| 1.3.6.1.4.1.1916.5.3.1.4.1.1.1 | ColumnassocAddress | read-only | current | MAC address associated with the client. |
| 1.3.6.1.4.1.1916.5.3.1.4.1.1.2 | ColumnassocIfIndex | read-only | current | Interface index of the radio to which the client is associated. |
| 1.3.6.1.4.1.1916.5.3.1.4.1.1.3 | ColumnassocReceivedRSSI | read-only | current | Received signal strength for the packets received from this client. |
| 1.3.6.1.4.1.1916.5.3.1.4.1.1.4 | ColumnassocTransmittedRSSI | read-only | current | Received signal strength averaged for the ACK packets received in response to transmitted packets for this client. |
| 1.3.6.1.4.1.1916.5.3.1.4.1.1.5 | ColumnassocReceivedRate | read-only | current | PHY rate for the packets received from this client. |
| 1.3.6.1.4.1.1916.5.3.1.4.1.1.6 | ColumnassocTransmittedRate | read-only | current | PHY rate used to transmit packets for this client. |
| 1.3.6.1.4.1.1916.5.3.1.4.1.1.7 | ColumnassocReceivedFrameCount | read-only | current | Frames received from this client. |
| 1.3.6.1.4.1.1916.5.3.1.4.1.1.8 | ColumnassocTransmittedFrameCount | read-only | current | Frames transmitted for this client. |
| 1.3.6.1.4.1.1916.5.3.1.4.1.1.9 | ColumnassocReceiveErrors | read-only | current | Frames received with errors from this client. |
| 1.3.6.1.4.1.1916.5.3.1.4.1.1.10 | ColumnassocTransmitErrors | read-only | current | Frames transmitted with errors (not acknowledged) for this cleint. |
| 1.3.6.1.4.1.1916.5.3.1.4.1.1.11 | ColumnassocTransmitBytes | read-only | current | Bytes transmitted for this client. |
| 1.3.6.1.4.1.1916.5.3.1.4.1.1.12 | ColumnassocReceiveBytes | read-only | current | Bytes received from this client. |
| 1.3.6.1.4.1.1916.5.3.1.4.2 | TableassocCountersTable | not-accessible | current | STA association statistics table. |
| 1.3.6.1.4.1.1916.5.3.1.4.2.1 | RowassocCountersEntry | not-accessible | current | Entry in the STA association statistics table. |
| 1.3.6.1.4.1.1916.5.3.1.4.2.1.1 | ColumnassocAuthenticationCount | read-only | current | Number of authentications for this client. |
| 1.3.6.1.4.1.1916.5.3.1.4.2.1.2 | ColumnassocDeauthenticationCount | read-only | current | Number of deauthentications for this client. |
| 1.3.6.1.4.1.1916.5.3.1.4.2.1.3 | ColumnassocAssociationCount | read-only | current | Number of associations for this client. |
| 1.3.6.1.4.1.1916.5.3.1.4.2.1.4 | ColumnassocDeassociationCount | read-only | current | Number of deassociations for this client. |
| 1.3.6.1.4.1.1916.5.3.1.4.2.1.5 | ColumnassocReassociationCount | read-only | current | Number of reassociations for this client. |
| 1.3.6.1.4.1.1916.5.3.1.5 | Nodedot11ExtConformance | |||
| 1.3.6.1.4.1.1916.5.3.1.5.1 | CompliancesummitWMDot11ExtModule | current | EXTREME-SUMMIT-WM-DOT11-EXTNS module compliance. | |
| 1.3.6.1.4.1.1916.5.3.1.5.2 | GroupsummitWMDot11ExtGroups | current | Extreme summit WM Dot11-Extns object-group. | |
| 1.3.6.1.4.1.1916.5.5.3 | IdentitysummitWMDot11ExtnsMIB | Summit WM Dot11 extensions MIB. This module provides extension objects to the ieee80211 MIB. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| WEPKeytype | OCTET STRING (SIZE (0 | 14 | 38)) |