EXTREME-SUMMIT-WM-MIB

210 objects

Summit WM MIB definition

Imported Objects

EXTREME-SUMMIT-WM-SMI	summitWMMgmt summitWMModules
IEEE802dot11-MIB	WEPKeytype
IF-MIB	ifIndex InterfaceIndex
SNMPv2-CONF	MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMI	Counter64 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks
SNMPv2-TC	DisplayString MacAddress RowStatus TEXTUAL-CONVENTION TruthValue

OID	Name	Access	Status	Description
1.3.6.1.4.1.1916.5.3.2	NodesummitWM
1.3.6.1.4.1.1916.5.3.2.1	NodesystemObjects
1.3.6.1.4.1.1916.5.3.2.1.1	ScalarsysSoftwareVersion	read-only	current	System software version.
1.3.6.1.4.1.1916.5.3.2.1.2	ScalarsysLogLevel	read-write	current	Sets the level of events which are written to the system log.
1.3.6.1.4.1.1916.5.3.2.1.3	ScalarsysSerialNo	read-only	current	System serial number.
1.3.6.1.4.1.1916.5.3.2.1.4	NodesysLogSupport
1.3.6.1.4.1.1916.5.3.2.1.4.1	ScalarsummitWMAppLogFacility	read-write	current	The application log facility level for syslog.
1.3.6.1.4.1.1916.5.3.2.1.4.2	ScalarserviceLogFacility	read-write	current	The service log facility level for syslog.
1.3.6.1.4.1.1916.5.3.2.1.4.3	ScalarincludeAllServiceMessages	read-write	current	Indicates if DHCP messages should also be forwarded to syslog.
1.3.6.1.4.1.1916.5.3.2.1.4.4	TablesysLogServersTable	not-accessible	current	Table of syslog servers to forward logging messages.
1.3.6.1.4.1.1916.5.3.2.1.4.4.1	RowsysLogServersEntry	not-accessible	current	Configuration information for an external syslog server.
1.3.6.1.4.1.1916.5.3.2.1.4.4.1.1	ColumnsysLogServerIndex	read-write	current	Table index for the syslog server.
1.3.6.1.4.1.1916.5.3.2.1.4.4.1.2	ColumnsysLogServerEnabled	read-write	current	Indicates if messages are to be sent to the syslog server.
1.3.6.1.4.1.1916.5.3.2.1.4.4.1.3	ColumnsysLogServerIP	read-write	current	syslog server IP address.
1.3.6.1.4.1.1916.5.3.2.1.4.4.1.4	ColumnsysLogServerPort	read-write	current	syslog server port number.
1.3.6.1.4.1.1916.5.3.2.1.4.4.1.5	ColumnsysLogServerRowStatus	read-write	current	RowStatus for operating on syslogServersTable.
1.3.6.1.4.1.1916.5.3.2.3	NodemgmtPortObjects
1.3.6.1.4.1.1916.5.3.2.3.1	ScalarmgmtPortIfIndex	read-only	current	ifIndex of the management port.
1.3.6.1.4.1.1916.5.3.2.3.2	ScalarmgmtPortHostname	read-write	current	Hostname of the management port.
1.3.6.1.4.1.1916.5.3.2.3.3	ScalarmgmtPortPrimaryDNS	read-write	current	Primary domain server for the management port.
1.3.6.1.4.1.1916.5.3.2.3.4	ScalarmgmtPortSecondaryDNS	read-write	current	Secondary domain server for the management port.
1.3.6.1.4.1.1916.5.3.2.3.5	ScalarmgmtPortDomain	read-write	current	Domain of the management port.
1.3.6.1.4.1.1916.5.3.2.4	NodephysicalPortObjects
1.3.6.1.4.1.1916.5.3.2.4.1	ScalarphysicalPortCount	read-only	current	Number of rows in routerPortsTable.
1.3.6.1.4.1.1916.5.3.2.4.2	TablephysicalPortsTable	not-accessible	current	Table of router ports on the controller.
1.3.6.1.4.1.1916.5.3.2.4.2.1	RowphysicalPortsEntry	not-accessible	current	An entry in routerPortsTable.
1.3.6.1.4.1.1916.5.3.2.4.2.1.1	ColumnportMgmtTrafficEnable	read-write	current	Determines whether controller management network traffic is allowed over this interface.
1.3.6.1.4.1.1916.5.3.2.4.2.1.2	ColumnportDuplexMode	read-write	current	Duplex mode for the esa ports.
1.3.6.1.4.1.1916.5.3.2.4.2.1.3	ColumnportFunction	read-write	current	Specifies the behavior of the WM physical ports.
1.3.6.1.4.1.1916.5.3.2.5	NodeadManagerObjects
1.3.6.1.4.1.1916.5.3.2.5.1	ScalaradRole	read-write	current	Specifies the role of this WM in inter-WM mobility. None indicates that mobile units cannot roam to or from this WM. In any WM cluster, only one WM should be s…
1.3.6.1.4.1.1916.5.3.2.5.2	ScalaradIfIndex	read-write	current	ifIndex of the physical port where inter-WM tunnels terminate.
1.3.6.1.4.1.1916.5.3.2.5.3	ScalaradHeartBeatInterval	read-write	current	The time interval between inter-WM polling messages.
1.3.6.1.4.1.1916.5.3.2.6	NodentpObjects
1.3.6.1.4.1.1916.5.3.2.6.1	ScalarntpEnabled	read-write	current	Enable or disables support for the Network Time Protocol (NTP).
1.3.6.1.4.1.1916.5.3.2.6.2	ScalarntpTimezone	read-write	current	Specifies the time zone where this WM resides.
1.3.6.1.4.1.1916.5.3.2.6.3	ScalarntpTimeServer1	read-write	current	Primary NTP server.
1.3.6.1.4.1.1916.5.3.2.6.4	ScalarntpTimeServer2	read-write	current	Secondary NTP server.
1.3.6.1.4.1.1916.5.3.2.6.5	ScalarntpTimeServer3	read-write	current	Tertiary NTP server.
1.3.6.1.4.1.1916.5.3.2.7	NodecontrollerStats
1.3.6.1.4.1.1916.5.3.2.7.6	ScalartunnelCount	read-only	current	Number of connections to other summitWM controllers.
1.3.6.1.4.1.1916.5.3.2.7.7	TabletunnelStatsTable	not-accessible	current	tunnelStatsTable contains a list of the IP tunnels connected to this WM for use in inter-WM mobility.
1.3.6.1.4.1.1916.5.3.2.7.7.1	RowtunnelStatsEntry	not-accessible	current	Statistics for a mobility tunnel.
1.3.6.1.4.1.1916.5.3.2.7.7.1.1	ColumntunnelStartIP	read-write	current	IP address for the start of the tunnel.
1.3.6.1.4.1.1916.5.3.2.7.7.1.2	ColumntunnelStartWM	read-write	current	Name of the access controller for the start of the tunnel.
1.3.6.1.4.1.1916.5.3.2.7.7.1.3	ColumntunnelEndIP	read-write	current	IP address for the end of the tunnel.
1.3.6.1.4.1.1916.5.3.2.7.7.1.4	ColumntunnelEndWM	read-write	current	Name of the access controller for the end of the tunnel.
1.3.6.1.4.1.1916.5.3.2.7.7.1.5	ColumntunnelStatus	read-write	current	Indicates if the mobility tunnel is up or down.
1.3.6.1.4.1.1916.5.3.3	NodeaccessDomains
1.3.6.1.4.1.1916.5.3.3.1	NodewmadConfigObjects
1.3.6.1.4.1.1916.5.3.3.1.1	ScalarwmadCount	read-only	current	Number of WMADs defined in wmadConfigTable.
1.3.6.1.4.1.1916.5.3.3.1.2	TablewmadConfigTable	not-accessible	current	Contains definitions of the Access Domain Segments defined on this SummitWM.
1.3.6.1.4.1.1916.5.3.3.1.2.1	RowwmadConfigEntry	not-accessible	current	Configuration elements for a specific Access Domain Segment.
1.3.6.1.4.1.1916.5.3.3.1.2.1.1	ColumnwmadDescription	read-write	current	Textual description of the WMAD.
1.3.6.1.4.1.1916.5.3.3.1.2.1.2	ColumnwmadAssignmentMode	read-write	current	Determines the method by which mobile units are assigned an address within this WMAD. If wmadAssignmentMode = ssid, any client with an SSID matching the WMAD w…
1.3.6.1.4.1.1916.5.3.3.1.2.1.3	ColumnwmadMUSessionTimeout	read-write	current	Client session idle time out, in seconds.
1.3.6.1.4.1.1916.5.3.3.1.2.1.4	ColumnwmadAllowMulticast	read-write	current	When true, allows IP multicast packets to be broadcast to the clients on this WMAD.
1.3.6.1.4.1.1916.5.3.3.1.2.1.5	ColumnwmadSSID	read-write	current	Service Set Identifier (i.e. Network Name) that will be configured on the Altitudes associated with this WMAD.
1.3.6.1.4.1.1916.5.3.3.1.2.1.6	ColumnwmadDomain	read-write	current	Domain name to be supplied to the wireless clients if internal DHCP address assignment.
1.3.6.1.4.1.1916.5.3.3.1.2.1.7	ColumnwmadDNSServers	read-write	current	List of DNSs to be supplied to the wireless clients if internal DHCP address assignment.
1.3.6.1.4.1.1916.5.3.3.1.2.1.8	ColumnwmadWINSServers	read-write	current	List of WINSs to be supplied to the wireless clients if internal DHCP address assignment.
1.3.6.1.4.1.1916.5.3.3.1.2.1.9	ColumnwmadAuthModel	read-write	current	wmadAuthModel specifies the authentication method used for clients in the WMAD. None indicates that the WMAD is open, and no authentication is required. wmadAu…
1.3.6.1.4.1.1916.5.3.3.1.2.1.10	ColumnwmadParentIfIndex	read-write	current	Specifies the ifIndex of the parent WMAD, if this WMAD is a child. This only applies for a WMAD where wmadAssignmentMode=aaa. If this is a top level WMAD, wmad…
1.3.6.1.4.1.1916.5.3.3.1.2.1.11	ColumnwmadMgmtTrafficEnable	read-write	current	Specifies whether clients in the WMAD have access to WM management elements.
1.3.6.1.4.1.1916.5.3.3.1.2.1.12	ColumnwmadUseDHCPRelay	read-write	current	When true, specifies that DHCP Relay is enabled on the WMAD.
1.3.6.1.4.1.1916.5.3.3.1.2.1.13	Columnwmad3rdPartyAP	read-write	current	When true, specifies that the WMAD contains 3rd party access points. Only one such WMAD may be defined for a summitWM.
1.3.6.1.4.1.1916.5.3.3.1.2.1.14	ColumnwmadStatus	read-write	current	RowStatus variable for performing row operations on wmadConfigTable.
1.3.6.1.4.1.1916.5.3.3.1.3	TablewmadDHCPRangeTable	not-accessible	current	wmadDHCPRangeTable contains the IP address ranges that DHCP will serve to clients associated with this WMAD.
1.3.6.1.4.1.1916.5.3.3.1.3.1	RowwmadDHCPRangeEntry	not-accessible	current	Configuration information for a DHCP range.
1.3.6.1.4.1.1916.5.3.3.1.3.1.1	ColumnwmadDHCPRangeIndex	read-write	current	Index for the DHCP row element.
1.3.6.1.4.1.1916.5.3.3.1.3.1.2	ColumnwmadDHCPRangeStart	read-write	current	First IP address in the range.
1.3.6.1.4.1.1916.5.3.3.1.3.1.3	ColumnwmadDHCPRangeEnd	read-write	current	Last IP address in the range.
1.3.6.1.4.1.1916.5.3.3.1.3.1.4	ColumnwmadDHCPRangeType	read-write	current	Determines whether addresses in the specified range will be included, or excluded by the DHCP server.
1.3.6.1.4.1.1916.5.3.3.1.3.1.5	ColumnwmadDHCPRangeStatus	read-write	current	Row status variable for row operations on the wmadDHCPRangeTable
1.3.6.1.4.1.1916.5.3.3.1.4	TablewmadCaptivePortalTable	not-accessible	current	Details of the Captive Portal login page for WMADs that have wmadAssignment=ssid and wmadAuthModel=captivePortal.
1.3.6.1.4.1.1916.5.3.3.1.4.1	RowwmadCaptivePortalEntry	not-accessible	current	Captive Portal Information for the WMAD.
1.3.6.1.4.1.1916.5.3.3.1.4.1.1	ColumncpURL	read-write	current	Redirect URL of the Captive Portal login page.
1.3.6.1.4.1.1916.5.3.3.1.4.1.2	ColumncpLoginLabel	read-write	current	Label that appears in front of the login field on the Captive Portal login page.
1.3.6.1.4.1.1916.5.3.3.1.4.1.3	ColumncpPasswordLabel	read-write	current	Label that appears in front of the password field on the Captive Portal login page.
1.3.6.1.4.1.1916.5.3.3.1.4.1.4	ColumncpHeaderURL	read-write	current	URL of the Captive Portal header.
1.3.6.1.4.1.1916.5.3.3.1.4.1.5	ColumncpFooterURL	read-write	current	URL of the Captive Portal footer.
1.3.6.1.4.1.1916.5.3.3.1.4.1.6	ColumncpMessage	read-write	current	A welcome message, or set of instructions that is to appear on the Captive Portal login page.
1.3.6.1.4.1.1916.5.3.3.1.5	TablewmadRadiusServerTable	not-accessible	current	List of RADIUS servers to be utilized for authentication in the WMAD.
1.3.6.1.4.1.1916.5.3.3.1.5.1	RowwmadRadiusServerEntry	not-accessible	current	Configuration information for a RADIUS server.
1.3.6.1.4.1.1916.5.3.3.1.5.1.1	ColumnwmadRadiusServerIP	read-write	current	IP address of the RADIUS server.
1.3.6.1.4.1.1916.5.3.3.1.5.1.2	ColumnwmadRadiusServerPort	read-write	current	Port number for the RADIUS server.
1.3.6.1.4.1.1916.5.3.3.1.5.1.3	ColumnwmadRadiusServerRetries	read-write	current	Number of retries for a RADIUS authentication request.
1.3.6.1.4.1.1916.5.3.3.1.5.1.4	ColumnwmadRadiusServerTimeout	read-write	current	Delay between requests.
1.3.6.1.4.1.1916.5.3.3.1.5.1.5	ColumnwmadRadiusServerSharedSecret	read-write	current	Shared secret to be used between the NAS and RADIUS server.
1.3.6.1.4.1.1916.5.3.3.1.5.1.6	ColumnwmadRadiusServerNASIdentifier	read-write	current	NAS identifier to be include in RADIUS request.
1.3.6.1.4.1.1916.5.3.3.1.5.1.7	ColumnwmadRadiusServerAuthType	read-write	current	Challenge mechanism for the request.
1.3.6.1.4.1.1916.5.3.3.1.5.1.8	ColumnwmadRadiusServerRowStatus	read-write	current	RowStatus value for manipulating wmadRADIUSServerTable.
1.3.6.1.4.1.1916.5.3.3.1.6	TablewmadFilterIDTable	not-accessible	current	Table of names filters for a WMAD.
1.3.6.1.4.1.1916.5.3.3.1.6.1	RowwmadFilterIDEntry	not-accessible	current	Name of a specific filter in the WMAD.
1.3.6.1.4.1.1916.5.3.3.1.6.1.1	ColumnwmadFilterID	read-write	current	Filter names.
1.3.6.1.4.1.1916.5.3.3.1.6.1.2	ColumnwmadFilterIDStatus	read-write	current	RowStatus for operating on wmadFilterIDTable.
1.3.6.1.4.1.1916.5.3.3.1.7	TablewmadFilterRuleTable	not-accessible	current	Table containing specific filters for a named filter.
1.3.6.1.4.1.1916.5.3.3.1.7.1	RowwmadFilterRuleEntry	not-accessible	current	Filter elements for an individual WMAD filter.
1.3.6.1.4.1.1916.5.3.3.1.7.1.1	ColumnwmadFilterRuleOrder	read-write	current	Position of the filter in the filter list.
1.3.6.1.4.1.1916.5.3.3.1.7.1.2	ColumnwmadFilterRuleDirection	read-write	current	Traffic direction to apply the rule.
1.3.6.1.4.1.1916.5.3.3.1.7.1.3	ColumnwmadFilterRuleAction	read-write	current	Allow or deny traffic for the filter.
1.3.6.1.4.1.1916.5.3.3.1.7.1.4	ColumnwmadFilterRuleIPAddress	read-write	current	IP address to apply the filter.
1.3.6.1.4.1.1916.5.3.3.1.7.1.5	ColumnwmadFilterRulePortLow	read-write	current	Low port number for the filter.
1.3.6.1.4.1.1916.5.3.3.1.7.1.6	ColumnwmadFilterRulePortHigh	read-write	current	High port number for the filter.
1.3.6.1.4.1.1916.5.3.3.1.7.1.7	ColumnwmadFilterRuleProtocol	read-write	current	Specific protocol to filter.
1.3.6.1.4.1.1916.5.3.3.1.7.1.8	ColumnwmadFilterRuleEtherType	read-write	current	Specific ethertype to filter.
1.3.6.1.4.1.1916.5.3.3.1.7.1.9	ColumnwmadFilterRuleStatus	read-write	current	RowStatus value for the wmadFilterRuleTable.
1.3.6.1.4.1.1916.5.3.3.1.8	TablewmadPrivacyTable	not-accessible	current	Table of privacy settings for the WMAD.
1.3.6.1.4.1.1916.5.3.3.1.8.1	RowwmadPrivacyEntry	not-accessible	current	Configuration values for a specific privacy setting.
1.3.6.1.4.1.1916.5.3.3.1.8.1.1	ColumnwmadPrivWEPKeyType	read-write	current	Type of key in use. none(1) = not cofigured, wepstatic(2) = static WEP, wpapsk(3) = WPA Pre-Shared Key, dynamic(4) = dynamically assigned, wpa(5) = WPA.
1.3.6.1.4.1.1916.5.3.3.1.8.1.2	ColumnwmadPrivDynamicRekeyFrequency	read-write	current	Dynamic WEP re-keying frequency, in seconds. Setting this value to 0 disables rekeying. This value is only meaningful if wmadPrivWEPKeyType == dynamic. For any…
1.3.6.1.4.1.1916.5.3.3.1.8.1.3	ColumnwmadPrivWEPKeyLength	read-write	current	WEP key length, either 40 or 104 bit. If wmadPrivWEPKeyType is none, reading or setting this value will return an unsuccessful status and will return a value o…
1.3.6.1.4.1.1916.5.3.3.1.8.1.4	ColumnwmadPrivWPA1Enabled	read-write	current	Enables WPA.1 (Wi-Fi Protected Access).
1.3.6.1.4.1.1916.5.3.3.1.8.1.5	ColumnwmadPrivUseSharedKey	read-write	current	Enables the use of WPA shared key for this WMAD.
1.3.6.1.4.1.1916.5.3.3.1.8.1.6	ColumnwmadPrivWPASharedKey	read-write	current	The value of the WPA shared key for this WMAD. This value is logically WRITE ONLY. Attempts to read this value shall return unsuccessful status and values of n…
1.3.6.1.4.1.1916.5.3.3.1.8.1.7	ColumnwmadPrivWPA2Enabled	read-write	current	When true, WPA v.2 support is enabled.
1.3.6.1.4.1.1916.5.3.3.1.9	TablewmadWEPKeyTable	not-accessible	current	Table of WEP key entries for a static WEP definition.
1.3.6.1.4.1.1916.5.3.3.1.9.1	RowwmadWEPKeyEntry	not-accessible	current	WEP key for a single entry in the table.
1.3.6.1.4.1.1916.5.3.3.1.9.1.1	ColumnwmadWEPKeyIndex	read-write	current	Table index for the WEP key.
1.3.6.1.4.1.1916.5.3.3.1.9.1.2	ColumnwmadWEPKeyValue	read-write	current	Value of a WEP key for this WMAD. This value is logically WRITE ONLY. Attempts to read this value shall return unsuccessful status and values of null or zero.
1.3.6.1.4.1.1916.5.3.3.1.10	Tablewmad3rdPartyAPTable	not-accessible	current	Contains a list of 3rd Party access points for the WM.
1.3.6.1.4.1.1916.5.3.3.1.10.1	Rowwmad3rdPartyAPEntry	not-accessible	current	Configuration information for a 3rd party access point.
1.3.6.1.4.1.1916.5.3.3.1.10.1.1	ColumnapMacAddress	read-write	current	Ethernet MAC address of the 3rd party access point.
1.3.6.1.4.1.1916.5.3.3.1.10.1.2	ColumnapIpAddress	read-write	current	IP address of the 3rd party access point.
1.3.6.1.4.1.1916.5.3.3.2	NodewmadStatsObjects
1.3.6.1.4.1.1916.5.3.3.2.1	ScalaractiveWMADSessionCount	read-write	current	Number of active WMADs.
1.3.6.1.4.1.1916.5.3.5	Nodealtitude
1.3.6.1.4.1.1916.5.3.5.1	NodealtitudeConfigObjects
1.3.6.1.4.1.1916.5.3.5.1.1	ScalaraltitudeCount	read-only	current	The count of currently configured Altitudes associated with this summitWM.
1.3.6.1.4.1.1916.5.3.5.1.2	TablealtitudeTable	not-accessible	current	Contains a list of all configured Altitudes associated with the summitWM.
1.3.6.1.4.1.1916.5.3.5.1.2.1	RowaltitudeEntry	not-accessible	current	Configuration information for an access point.
1.3.6.1.4.1.1916.5.3.5.1.2.1.1	ColumnaltitudeIndex	read-write	current	Table index for the access point.
1.3.6.1.4.1.1916.5.3.5.1.2.1.2	ColumnaltitudeName	read-write	current	Altitude's name.
1.3.6.1.4.1.1916.5.3.5.1.2.1.3	ColumnaltitudeDesc	read-write	current	Text description of the Altitude.
1.3.6.1.4.1.1916.5.3.5.1.2.1.4	ColumnaltitudeSerialNumber	read-only	current	16-character serial number of the Altitude.
1.3.6.1.4.1.1916.5.3.5.1.2.1.5	ColumnaltitudePortifIndex	read-write	current	ifIndex of the physical port to which this Altitude is assigned.
1.3.6.1.4.1.1916.5.3.5.1.2.1.6	ColumnaltitudeWiredIfIndex	read-write	current	ifIndex of the wired interface on the Altitude.
1.3.6.1.4.1.1916.5.3.5.1.2.1.7	ColumnaltitudeSoftwareVersion	read-only	current	Software version currently installed on the Altitude.
1.3.6.1.4.1.1916.5.3.5.1.2.1.8	ColumnaltitudeSpecific	read-only	current	A link back to the OID under the summitWMProducts branch that identifies the specific version of this Altitude.
1.3.6.1.4.1.1916.5.3.5.1.2.1.9	ColumnaltitudeBroadcastDisassociate	read-write	current	True indicates that the Altitude should broadcast disassociation requests, False indicates unicast.
1.3.6.1.4.1.1916.5.3.5.1.2.1.10	ColumnaltitudeRowStatus	read-write	current	RowStatus for the altitudeTable.
1.3.6.1.4.1.1916.5.3.5.1.3	TablealtitudeRadioTable	not-accessible	current	Table access point radio configuration information.
1.3.6.1.4.1.1916.5.3.5.1.3.1	RowaltitudeRadioEntry	not-accessible	current	Configuration information for a radio on the access point.
1.3.6.1.4.1.1916.5.3.5.1.3.1.1	ColumnaltitudeRadioFrequency	read-only	current	Indicates the type of radio (a or b/g).
1.3.6.1.4.1.1916.5.3.5.1.4	TableradioWMADTable	not-accessible	current	Table of WMADs the radio is participating in.
1.3.6.1.4.1.1916.5.3.5.1.4.1	RowradioWMADEntry	not-accessible	current	Information for a single WMAD entry.
1.3.6.1.4.1.1916.5.3.5.1.4.1.1	ColumnradioIfIndex	read-write	current	Radio participating in the WMAD.
1.3.6.1.4.1.1916.5.3.5.1.4.1.2	ColumnwmadIfIndex	read-write	current	ifIndex for the WMAD the radio is participating.
1.3.6.1.4.1.1916.5.3.5.1.4.1.3	ColumnradioWMADRowStatus	read-write	current	RowStatus for the radioWMADTable.
1.3.6.1.4.1.1916.5.3.5.2	NodealtitudeStatsObjects
1.3.6.1.4.1.1916.5.3.5.2.1	ScalaraltitudeActiveCount	read-only	current	The count of active Altitude associated with this summitWM.
1.3.6.1.4.1.1916.5.3.5.2.2	TablealtitudeStatsTable	not-accessible	current	Table of statistics for the access points.
1.3.6.1.4.1.1916.5.3.5.2.2.1	RowaltitudeStatsEntry	not-accessible	current	Statistics for an access point.
1.3.6.1.4.1.1916.5.3.5.2.2.1.1	ColumnaltitudeInUcastPkts	read-only	current	Number of unicast packets from wireless-to-wired network.
1.3.6.1.4.1.1916.5.3.5.2.2.1.2	ColumnaltitudeInNUcastPkts	read-only	current	Number of non-unicast packets from wireless-to-wired network.
1.3.6.1.4.1.1916.5.3.5.2.2.1.3	ColumnaltitudeInOctets	read-only	current	Number of octets from wireless-to-wired network.
1.3.6.1.4.1.1916.5.3.5.2.2.1.4	ColumnaltitudeInErrors	read-only	current	Number of error packets from wireless-to-wired network.
1.3.6.1.4.1.1916.5.3.5.2.2.1.5	ColumnaltitudeInDiscards	read-only	current	Number of discarded packets from wireless-to-wired network.
1.3.6.1.4.1.1916.5.3.5.2.2.1.6	ColumnaltitudeOutUcastPkts	read-only	current	Number of unicast packets from wired-to-wireless network.
1.3.6.1.4.1.1916.5.3.5.2.2.1.7	ColumnaltitudeOutNUcastPkts	read-only	current	Number of non-unicast packets from wired-to-wireless network.
1.3.6.1.4.1.1916.5.3.5.2.2.1.8	ColumnaltitudeOutOctets	read-only	current	Number of octets from wired-to-wireless network.
1.3.6.1.4.1.1916.5.3.5.2.2.1.9	ColumnaltitudeOutErrors	read-only	current	Number of error packets from wired-to-wireless network.
1.3.6.1.4.1.1916.5.3.5.2.2.1.10	ColumnaltitudeOutDiscards	read-only	current	Number of discarded packets from wired-to-wireless network.
1.3.6.1.4.1.1916.5.3.5.2.2.1.11	ColumnaltitudeUpTime	read-only	current	Description.
1.3.6.1.4.1.1916.5.3.6	NodemobileUnits
1.3.6.1.4.1.1916.5.3.6.1	ScalarmobileUnitCount	read-write	current	Number of clients associated with the access point.
1.3.6.1.4.1.1916.5.3.6.2	TablemuTable	not-accessible	current	Table of information for clients associated with the WM.
1.3.6.1.4.1.1916.5.3.6.2.1	RowmuEntry	not-accessible	current	Information for a client associated with the WM.
1.3.6.1.4.1.1916.5.3.6.2.1.1	ColumnmuMACAddress	read-only	current	Client MAC address.
1.3.6.1.4.1.1916.5.3.6.2.1.2	ColumnmuIPAddress	read-only	current	Client IP Address.
1.3.6.1.4.1.1916.5.3.6.2.1.3	ColumnmuUser	read-only	current	Client login name.
1.3.6.1.4.1.1916.5.3.6.2.1.4	ColumnmuState	read-only	current	True if the client is authenticated.
1.3.6.1.4.1.1916.5.3.6.2.1.5	ColumnmuAltitudeSerialNo	read-only	current	Serial Number of the Altitude the client is associated with.
1.3.6.1.4.1.1916.5.3.6.2.1.6	ColumnmuWmadSSID	read-only	current	SSID of the WMAD the client is associated with.
1.3.6.1.4.1.1916.5.3.6.2.1.7	ColumnmuTxPackets	read-only	current	Number of packets trasmitted to the client.
1.3.6.1.4.1.1916.5.3.6.2.1.8	ColumnmuRxPackets	read-only	current	Number of packets received from the client.
1.3.6.1.4.1.1916.5.3.6.2.1.9	ColumnmuTxOctets	read-only	current	Number of octets transmitted to the client.
1.3.6.1.4.1.1916.5.3.6.2.1.10	ColumnmuRxOctets	read-only	current	Number of octets received from the client.
1.3.6.1.4.1.1916.5.3.6.2.1.11	ColumnmuDuration	read-only	current	Time client has been associated with the WM.
1.3.6.1.4.1.1916.5.3.7	Nodeassociations
1.3.6.1.4.1.1916.5.3.7.1	ScalarassocCount	read-write	current	Total number of current client associations to the access point.
1.3.6.1.4.1.1916.5.3.7.2	TableassocTable	not-accessible	current	Table of information about clients associated with the access point.
1.3.6.1.4.1.1916.5.3.7.2.1	RowassocEntry	not-accessible	current	Information for a single client in the association table.
1.3.6.1.4.1.1916.5.3.7.2.1.1	ColumnassocMUMacAddress	read-only	current	MAC address of the client.
1.3.6.1.4.1.1916.5.3.7.2.1.2	ColumnassocStartSysUpTime	read-only	current	How long the client has been associated to the access point.
1.3.6.1.4.1.1916.5.3.7.2.1.3	ColumnassocTxPackets	read-only	current	Nubmer of tx packets to the client.
1.3.6.1.4.1.1916.5.3.7.2.1.4	ColumnassocRxPackets	read-only	current	Number of received packets from the client.
1.3.6.1.4.1.1916.5.3.7.2.1.5	ColumnassocTxOctets	read-only	current	Number of octets sent to the client.
1.3.6.1.4.1.1916.5.3.7.2.1.6	ColumnassocRxOctets	read-only	current	Number of octets received from the client.
1.3.6.1.4.1.1916.5.3.7.2.1.7	ColumnassocDuration	read-write	current	Length of time since last association.
1.3.6.1.4.1.1916.5.3.7.2.1.8	ColumnassocWmadIfIndex	read-only	current	Index of WMAD to which the MU is associated with.
1.3.6.1.4.1.1916.5.3.8	Nodeprotocols
1.3.6.1.4.1.1916.5.3.8.1	Nodewmadc
1.3.6.1.4.1.1916.5.3.9	NodelogNotifications
1.3.6.1.4.1.1916.5.3.9.1	ScalarlogEventSeverityThreshold	read-write	current	Specifies the minimum level at which the SNMP agent will send notifications for log events. I.e., setting this value to 'major' will send notifcations for crit…
1.3.6.1.4.1.1916.5.3.9.3	ScalarlogEventSeverity	read-only	current	Contains the severity of the most recently trapped summitWMLogAlarm notification.
1.3.6.1.4.1.1916.5.3.9.4	ScalarlogEventComponent	read-write	current	Contains the component which sent the most recently trapped summitWMLogAlarm notification.
1.3.6.1.4.1.1916.5.3.9.5	ScalarlogEventDescription	read-only	current	Contains the description of the most recently trapped summitWMLogAlarm.
1.3.6.1.4.1.1916.5.3.9.6	NotificationsummitWMLogAlarm		current	Components of an alarm.
1.3.6.1.4.1.1916.5.3.19	NodealtitudeNotifications
1.3.6.1.4.1.1916.5.3.19.1	ScalaraltitudeEventId	read-write	current	Identifies event associated with Altitude or Altitude tunnel: altitudePollTimeout - an event triggered when Altitude disconnects from WM
1.3.6.1.4.1.1916.5.3.19.2	ScalaraltitudeEventDescription	read-only	current	Contains the description of the most recently triggered event.
1.3.6.1.4.1.1916.5.3.19.3	ScalaraltitudeEventSerialNumber	read-only	current	16-character serial number of the Altitude.
1.3.6.1.4.1.1916.5.3.19.4	NotificationaltitudeTunnelAlarm		current	alarm associated with Altitude and Altitude interface.
1.3.6.1.4.1.1916.5.3.30	NodesummitWMConformance
1.3.6.1.4.1.1916.5.3.30.1	CompliancesummitWMModule		current	Conformance definition for the WM MIB.
1.3.6.1.4.1.1916.5.3.30.2	GroupsummitWMGroup		current	Conformance groups.
1.3.6.1.4.1.1916.5.3.30.3	GroupsummitWMAlarms		current	Conformance information for the alarm groups.
1.3.6.1.4.1.1916.5.5.2	IdentitysummitWMMIB			Summit WM MIB definition

Type Definitions

Name	Syntax	Status	Description
LogEventSeverity	INTEGER { critical(1), major(2), minor(3), information(4), trace(5) }	current	The log event severities used in the access controller.

MIB Viewer

What's a MIB?

What's SNMP?

What's an OID?

SNMP Fundamentals

Using net-snmp

Configuring SNMP on Cisco devices

Configuring SNMP on Fortinet devices

Understanding MIBs

Troubleshooting SNMP

Searching OIDs

Modem/MTA bootfiles

DOCSIS Monitoring

Linux snmpd passthrough

EXTREME-SUMMIT-WM-MIB

Bulk Translate

Search Vendor MIBs

Search Vendor Traps